Abstract
Trans-reflective color filters, which take advantage of a phase compensated etalon (silver-titania-silver-titania) based nano-resonator, have been demonstrated to feature a variable spectral bandwidth at a constant resonant wavelength. Such adjustment of the bandwidth is presumed to translate into flexible control of the color saturation for the transmissive and reflective output colors produced by the filters. The thickness of the metallic mirror is primarily altered to tailor the bandwidth, which however entails a phase shift associated with the etalon. As a result, the resonant wavelength is inevitably displaced. In order to mitigate this issue, we attempted to compensate for the induced phase shift by introducing a dielectric functional layer on top of the etalon. The phase compensation mediated by the functional layer was meticulously investigated in terms of the thickness of the metallic mirror, from the perspective of the resonance condition. The proposed color filters were capable of providing additive colors of blue, green and red for the transmission mode while exhibiting subtractive colors of yellow, magenta and cyan for the reflection mode. The corresponding color saturation was estimated to be efficiently adjusted both in transmission and reflection.
Similar content being viewed by others
Introduction
Nano-structured color filters have gained a great deal of interest as a pivotal element in a variety of applications for display/imaging, sensing, color printing and photovoltaics1,2. The nano-structured color filters can realize a broad color palette by mimicking micro/nano structures in nature, such as that of a Morpho butterfly’s wings3,4,5,6. Unlike conventional colorant pigment based filters, such structural filters are believed to be impervious to heat exposure, ultra-violet irradiation and moisture7,8,9,10. To date, diverse structural colors have been reported based on plasmonic devices9,10,11,12,13,14,15,16, guided-mode resonance filters17,18,19,20,21 and etalon resonators of metal-dielectric-metal (MDM) configuration22,23,24,25,26,27,28,29. In particular, due to its salient features of simple structure and angular tolerance23,24,25,26,27, the etalon nano-resonator has been extensively adopted for embodying color filters. It is noted that silver (Ag) plays an integral role as a metallic mirror, in light of its low extinction coefficient and inter-band transitions that cause an optical loss in the visible band30. Transmissive and reflective color filters have previously been attempted by using relatively thin and thick Ag mirror layers, respectively22,23,24,25,26. Reflective devices employing a perfect absorber have also been reported27,28,29. However, it is accepted that a trans-reflective color filter is categorically integral to such applications as the holography, fluorescence microscopy, CCD imaging and so forth31,32. In order to efficiently manipulate the color saturation of its output, such a trans-reflective color filter is strongly preferred to allow a flexibly tailored bandwidth while preserving the resonant wavelength21.
In this paper, we present trans-reflective color filters, while taking advantage of a phase compensated etalon (PCE) based nano-resonator, allowing for an adjustable bandwidth at a constant resonant wavelength. Each filter consists of a silver-titania-silver (Ag-TiO2-Ag) structure integrated with a dielectric functional layer (DFL) in titania, thus assuming a (metal-dielectric-metal)|dielectric (MDMD) configuration. The proposed filter was rigorously inspected in terms of the resonant wavelength in accordance with the metal thickness. The DFL was validated to play a crucial role in adequately compensating for the phase shift incurred depending on the thickness of the metallic mirror, thereby preserving the resonant wavelength. In our previous work24, for a set of etalon color filters a phase compensation scheme based on a dielectric overlay was proposed and investigated to mainly improve their efficiency and angular sensitivity. However, the performance seriously hinges on the thickness of metallic mirrors associated with the etalon, which is responsible for the total accumulated phase shift within the cavity. In an attempt to mitigate that issue, in this work we endeavored to newly develop highly efficient trans-reflective color filters, enabling substantially relaxed tolerance in terms of the thickness of metallic mirrors, which would be of tremendous importance in fabrication. Another remarkable aspect is relevant to flexible control and substantial enhancement of the color saturation of the filter devices. From the viewpoint of practical applications, the color saturation, an attribute of visual perception, should be preferably adjusted while the resonant wavelength is stably retained in a certain color domain. The color saturation is principally determined by the spectral bandwidth21, which can be tailored by the thickness of metallic mirrors. However, the resonant wavelength might be inevitably altered by the total phase shift depending on the mirror thickness, so that the dominant wavelength is displaced so as to ultimately distort the reproducible color. In regard to our prominent contributions, adjustable bandwidths can be achieved with the resonant wavelength fixed, implying that the color saturation could be predictably controlled in a certain color domain without displacing the dominant wavelength. In an attempt to verify the performance of the proposed trans-reflective filters, the color response in transmission and reflection was evaluated with respect to the metal thickness in the International Commission on Illumination (CIE) 1931 chromaticity diagram. Finally, the color filters were assessed in terms of their angular tolerance.
Results
Trans-Reflective Color Filters Based on a Phase Compensated Etalon
The proposed trans-reflective color filter is based on a nano-resonator, where an MDM etalon incorporating a cavity of titania, which is sandwiched between two metallic mirrors of Ag, is integrated with a DFL of titania, as illustrated in Fig. 1. The structure is deemed to exhibit bandpass filtering characteristics in the visible band, which are represented by an intensity transmission and reflection of and , respectively. Here, Ta and Tb are the intensity transmissivities at the top and bottom Ag-TiO2 interfaces, respectively and Ra and Rb are the corresponding reflectivities33. The total phase accumulated during a single round-trip within the cavity is equivalent to δ = ϕprop − (ϕa + ϕb), where ϕa and ϕb are the reflection phase shift at the top and bottom metal-dielectric interfaces, respectively. The round-trip propagation phase shift is given by ϕprop =(4π/λ)ndc for normal incidence, where n and dc represent the refractive index and the cavity thickness, respectively. It is expected that for δ = 2mπ (m an integer), a transmission peak transpires at a resonant wavelength of λo, which is concurrent with a reflection dip33.
For the trans-reflective color filters based on a PCE based nano-resonator, the cavity, metallic mirror and DFL were designed in terms of their thickness so that the resonant spectra are obtained to render not only transmission peaks pertaining to blue (B), green (G) and red (R) but also reflection dips in relation to yellow (Y), magenta (M) and cyan (C). For the Ag and TiO2 materials used for the PCE, the dispersion characteristics are shown in supplementary Fig. S1. The metal thickness tm was set at 25 nm. The thickness of the titania cavity (dc) was determined to be 52, 73 and 100 nm, corresponding to the B, G and R bands at λo = 450, 535 and 650 nm, respectively. The DFL was chosen to be do = 50, 60 and 74 nm. The three filters, which are designated as Dev-1, Dev-2 and Dev-3, are presumed to produce primary additive colors of B, G and R for the transmission mode and subtractive counterparts of Y, M and C for the reflection mode.
The calculated and measured spectra for the three devices are shown in Fig. 2(a,b), respectively. The color filters were manufactured by alternately depositing Ag and TiO2 layers on a circular glass substrate with a footprint of diameter of 25.4 mm via e-beam evaporation. Dev-1 permits a transmission window and reflection dip at a resonant wavelength of λo = 450 nm. Likewise, Dev-2 and Dev-3 exhibited similar trans-reflective filtering characteristics in the vicinity of λo = 535 and 650 nm, respectively. The colors for the transmission and reflection modes are represented in the CIE 1931 chromaticity diagram, as shown in Fig. 2(c,d), respectively. The cross-sectional scanning electron microscope (SEM) image of the fabricated color filter (Dev-2) is shown in Fig. 2(e). The Ag and TiO2 films belonging to the PCE are believed to have been deposited, as intended. All three devices are monitored to ensure vivid color output for the transmission and reflection modes, as shown in Fig. 2(f). Consequently, it was confirmed that our color filters achieve a satisfactory trans-reflective operation, rendering additive RGB colors in transmission and CMY colors in reflection.
Phase Compensation Mediated by the DFL against Variations in the Thickness of the Metallic Mirrors
Considering that the output color is directly relevant to the shift in the center wavelength, we aim to explore the impact of the thickness of the metallic mirror on the transmission/reflection spectra. For the proposed color filters, the color saturation is critically dependent on the spectral bandwidth at a fixed resonant wavelength21. The color saturation, which is estimated from the ratio of the length from white point E (0.3333, 0.3333) to the point of interest and to the outer edge of the chromaticity diagram, signifies an attribute of visual perception, indicating the degree to which the color sensation differs from the achromatic sensation (without color) regardless of its perceived brightness34. The color saturation increases as the color coordinate approaches the horseshoe curve of the chromaticity diagram. In the case of a resonator color filter, the color saturation can be enhanced by increasing the thickness of the metallic mirror. However, the resonant wavelength would then be displaced as a result of variations in the reflection phase shifts in relation to the etalon structure.
In order to investigate the effect of the thickness of the metallic films (tm) on the resonant wavelength, the transmission/reflection spectra as well as the phase shifts with tm were calculated via a commercially available simulation tool, the Essential Macleod35. A comparative examination of the two cases of a conventional etalon and PCE incorporating the DFL was conducted in terms of the total phase, in order to validate the phase compensation mediated by the DFL. It is also noted that the DFL might serve as an anti-reflection (AR) coating to a certain extent when the thickness do is designed to mimic a quarter wavelength, satisfying nd° =λ/4, where n is the refractive index35. The contour maps of the calculated transmission spectra for tm ranging from 5 nm to 50 nm in steps of 5 nm for the cases of both a conventional etalon and PCE are shown in Fig. 3(a,b), respectively, with the thickness of the titania cavity fixed at 73 nm. In terms of the PCE, the DFL was 60-nm thick. Based on the contour maps for the spectra, it is shown that the bandwidth decreased with increasing metal thickness for both the conventional etalon and PCE. It is also stated that the resonant wavelength was drastically altered for the conventional etalon, whereas it remained almost constant for the proposed PCE. As for the transmission spectra according to the metal thickness, we paid attention to two specific cases of tm = 15 nm and tm = 25 nm both for the conventional etalon and PCE. The corresponding transmission and reflection spectra are presented in Fig. 3(c,d), respectively. The resonant wavelength is apparently invariant, irrespective of tm for the PCE, whereas it is noticeably blue-shifted with increasing tm for the conventional case. In order to gain better insight into the characteristic of preserving the resonant wavelength of PCE, which is imputed to the DFL, we examined the total phase pertaining to the structures, which determines the resonant wavelength λo35. The calculated phase shift taking place within the cavity is shown in Fig. 3(e) through 3(h) for the cases of: (e) a conventional etalon with no DFL for tm = 15 nm, (f) a PCE for tm = 15 nm, (g) a similar conventional etalon for tm = 25 nm and (h) a PCE for tm = 25 nm. The accumulated phase δ for the conventional etalon becomes approximately zero at λo = 600 and 555 nm, corresponding to the resonant wavelengths in the cases of tm = 15 and 25 nm, respectively, as shown in Fig. 3(e,g). For the PCE with tm = 15 and 25 nm, the total phase becomes nearly zero at the same λo = 535 nm, as shown in Fig. 3(f,h), respectively. The reflection phase shift relating to the top Ag-TiO2 interface (ϕa) is precisely compensated for by the DFL made of titania, resulting in no variations in the resonance condition. It is hence verified for the PCE resonator that the resonant wavelength can be kept stable in spite of the changes in the metal thickness.
For the conventional etalon and PCE, the reflection phase shifts in relation to the top and bottom Ag-TiO2 interfaces were observed at the resonant wavelength of λo = 535 nm, as shown in Fig. 4. The reflection phases for the thin Ag layer at the top and bottom Ag-TiO2 boundaries increases slightly with tm for the case of the etalon with no DFL. As a result, as shown in Fig. 4(a), the reflection phase, equivalent to the sum of ϕa and ϕb, drastically changes with tm. However, ϕb corresponding to the PCE is almost perfectly compensated for by ϕa, which diminishes in the visible band, thereby maintaining a constant total reflection phase regardless of tm, as shown in Fig. 4(b). Since the round-trip propagation phase shift ϕprop is independent of tm and the reflection phase remains constant regardless of tm, the resonance condition tantamount to exhibiting a near-zero phase can be fulfilled at the given wavelength, as predicted. The adoption of the DFL allows the bandwidth to be tailored without displacing the resonant wavelength. Furthermore, in a bid to achieve an etalon nano-resonator featuring adjustable bandwidths throughout the visible band, we checked the transmission and reflection spectra for the conventional etalon and PCE, when the thicknesses of the cavity were 52, 74 and 100 nm. The relevant contour maps in response to the spectra are included depending on the cavity thickness in supplementary Figs S2 and S3, where the bandwidth adjustment at a fixed wavelength is also manifested for the proposed PCE in the blue and red bands.
Trans-Reflective Color Filters Enabling Adjustable Bandwidth at a Fixed Resonant Wavelength
It was verified that the proposed etalon nano-resonator, incorporating a DFL, possibly enables the bandwidth to be tailored while retaining a fixed resonant wavelength λo. Taking into account that a transmission peak is concurrent with the corresponding reflection dip in the visible regime, a trans-reflective color filter was created capitalizing on such a phase compensated nano-resonator. For the transmission and reflection spectra, the 3-dB bandwidth is flexibly varied by simply altering the thickness of the metallic mirrors pertaining to the resonator and thus the color saturation for the transmitted and reflected optical output is readily controlled21. For a resonator filter employing a 73-nm-thick titania cavity in conjunction with a 60-nm thick DFL, the calculated transmission and reflection responses are shown in Fig. 5(a,b), respectively, when the metal thickness is changed from tm = 15 nm to 50 nm in increments of 5 nm. It is found that the bandwidth becomes narrower for larger metal thickness, which is attributed to an enhanced reflectivity at both the top and bottom Ag-TiO2 interfaces33. For the filters having a 73-nm thick cavity, the performance under a trans-reflective configuration was explored by tracking the reproducible output colors in the CIE 1931 chromaticity diagram in terms of tm, both for the transmission and reflection modes, as depicted in Fig. 5(c). It is understood that the color saturation could be widely tuned for the PCE, entailing no significant shift in the resonant wavelength for the transmission spectra. In an effort to supplement these results, the calculated transmission/reflection spectra and the corresponding color map diagrams for the conventional etalon case are presented in supplementary Fig. S4, where a shift in λo is observed to translate into a change in the output color. It is revealed that as tm increases, the color saturation is enhanced for the transmission mode responsible for additive coloration, but it is degraded for the reflection mode rendering subtractive color reproduction when tm increases. In light of achieving transmissive green in conjunction with reflective magenta, the Ag layer was determined to be 25 nm thick. Two different trans-reflective color filters were additionally constructed in order to provide blue/yellow as well as red/cyan for the transmission/reflection modes, respectively. The transmission and reflection characteristics and the relevant chromaticity diagrams are shown in the vicinity of the blue and red spectral regimes, as included in supplementary Figs S5 and S6. For the three prepared trans-reflective color filters, including Dev-1, Dev-2 and Dev-3, we particularly scrutinized the influence of the thickness of the DFL on the performance in terms of the resonant wavelength and the peak transmission, as shown in supplementary Fig. S7. An appropriately designed DFL is useful not only for maintaining the resonant wavelength through the phase compensation but also for attaining the AR coating characteristic. When do deviates from the desired value equivalent to a quarter wavelength, the reflection phase at the Ag-TiO2 interface is altered to eventually shift the total phase pertaining to the proposed etalon filter, incurring shift in the resonant wavelength λo. Consequently, the DFL with a thickness of quarter wavelength plays a dual-role of preserving λo and suppressing reflection as an AR coating.
With the aim of inspecting the bandwidth tailoring for the resonator filters, which have a 73-nm-thick cavity made of titania, the transmission bandwidth hinging on the presence of the DFL is plotted in Fig. 6(a). Figure 6(b,c) show the transmission and the reflection bandwidths for the three PCE structures, operating in the B, G and R bands. It was observed that the transmission and reflection bandwidths decrease with increasing tm both for the conventional and the PCE structures. For the three PCE filters having titania cavities of dc = 52, 73 and 100 nm, the transmission and reflection bandwidths were approximately 83 and 97 nm for tm = 25 nm, respectively. This demonstrates that the color saturation can be primarily enhanced by narrowing the bandwidth of the passband of the filter for a reduced sideband level21. In this work, we attempted to vary the bandwidth by altering the thickness of the metallic mirror films, which determines the reflectivity of the top and bottom Ag-TiO2 interfaces, thereby diminishing both the bandwidth of the filter as well as its sideband level.
Based on the bandwidth adjustment and color map diagrams, we created three devices, including Dev-1, Dev-2 and Dev-3. Each device is deemed to deliver primary additive colors of B, G and R for the transmission mode while producing subtractive counterparts of Y, M and C for the reflection mode. It should be noted that the subtractive color should offer twice the photon throughput of its additive counterpart, which ultimately translates into elevated efficiencies and strengthened color signals9,10. From the viewpoint of their applications as a beam splitter, the proposed trans-reflective color filters are strongly preferred for accomplishing an angle tolerant performance. In order to support the angle insensitive performance of the fabricated color filters, we have monitored their color outputs by altering the angle of incidence from θo = 0 to 60°. Figure 7(a,b) first display the output color images corresponding to the RGB of the transmission mode and the CMY of the reflection mode, respectively, for θo = 45°. As shown in Fig. 7(c), a group of pictures were also taken of a building via the red color filter, Dev-3, by varying the angle from θo = 0 to 60° at an interval of 15°. The transmission and reflection spectra for the device were then measured using a spectrophotometer (PHOTON RT, Essent Optics Ltd.), as plotted in Fig. 7(d), by similarly varying the incident angle. Based on the results given in Fig. 7(a) through 7(d), it was found that the proposed red color filter resulted in no significant angle dependent variations in terms of the produced color and the spectral response in the transmission and reflection modes. The rest of the filter devices were similarly verified to give rise to equivalent angle insensitive performance. For Dev-1 and Dev-2, their color outputs and transmission/reflection spectra with the incident angles are particularly provided in supplementary Fig. S8. Due to their conspicuous properties such as angle insensitive color reproduction, the proposed PCE based color filters are anticipated to play a vital role as a beam splitting device in applications, spanning the microscopy, beam projectors and 3D hologram.
Discussion
In order to develop trans-reflective color filters, we present a phase compensated nano-resonator resorting to a functional layer, enabling bandwidth adjustment at a fixed resonant wavelength. The nano-resonator consists of a Ag-TiO2-Ag etalon structure overlaid with a thin titania film serving as a DFL, thus forming a (Ag-TiO2-Ag)|TiO2 configuration. The resonance condition was theoretically investigated in terms of the phase shift depending on the thickness of the Ag metallic mirror, so that the feasibility of the phase compensation empowered by the DFL could be validated. It is shown that the DFL helps provide a conspicuous feature of bandwidth adjustability at a fixed resonant wavelength irrespective of the metal thickness, allowing for flexible control of the color saturation. This is supported by the corresponding color response evaluated in the chromaticity diagram, whereby the proposed PCE permitting adjustable bandwidths could exhibit a wide range of color saturation in both transmission and reflection. The manufactured devices could demonstrate a peak reflection of ~90% and a peak transmission of ~70%, in conjunction with well-defined bandpass/bandstop characteristics, comparable to the performance of the colorant dye-based filters36,37. It is also verified via simulations that the spectral performance of the proposed color filters can be further enhanced by optimizing the thickness and optical properties of the metallic and dielectric layers. Such filters are predicted to be applied to embody color pixels for a variety of display and imaging devices. In addition, while the conventional multilayered color filters, used for color display or imaging applications, are typically comprised of as many as 20 layers, the proposed device involves much fewer metal-dielectric stacks so as to reproduce vivid color output. Taking into account such previous works as reported in ref. 38, which are based on a similar stacked film structure to the proposed scheme, we anticipate that our devices can be readily implemented to be suitable for colored imaging applications requiring a pixel resolution. Moreover, it should be noted the proposed color filters enable an angle insensitive performance, unlike the conventional multilayer based approaches. It is hence anticipated that the proposed filters can play a central role in various applications encompassing the holography, fluorescence microscopy, CCD imaging, etc.
Methods
Simulation
Calculations for obtaining transmission/reflection spectra and phase shifts were conducted using Essential Macleod (Version 9.8.436), which is a commercially available tool specialized for the analysis of thin-film structures.
Device fabrication
The proposed color filters were manufactured on a disc substrate made of polished B270 glass, with a diameter of 25.4 mm. Prior to the deposition of thin films, organic and inorganic contaminants on the substrate were removed via successive ultrasonification in acetone, ethanol and deionized water. A bottom Ag film of 25-nm thickness, a TiO2 cavity, which has different thicknesses of 52, 73 and 100 nm, a top Ag film of 25-nm thickness and a TiO2 DFL with thicknesses of 50, 60 and 74 nm, were subsequently deposited for the three devices of Dev-1, Dev-2 and Dev-3, respectively. The film deposition was fulfilled via e-beam evaporation on the glass substrate.
Optical characterization
A cross-sectional structure of the prepared Dev-2 was observed under a high-resolution scanning electron microscope (Hitachi Ultra-high Resolution SEM S-4800), as shown in Fig. 2(e). For the grown films, the thickness and index of refraction were verified using a reflecto-spectrometer (Filmtek4000, SCI), operating in the spectral range of 450 to 1,650 nm. The transmission and reflection spectra were measured in terms of the incident angle using spectrophotometers (Varian Cary 500, Varian, Inc.) and (PHOTON RT, Essent Optics Ltd).
Additional Information
How to cite this article: Park, C.-S. et al. Trans-Reflective Color Filters Based on a Phase Compensated Etalon Enabling Adjustable Color Saturation. Sci. Rep. 6, 25496; doi: 10.1038/srep25496 (2016).
References
Xu, T. et al. Structural colors: from plasmonic to carbon nanostructures. Small 7, 3128–3136 (2011).
Park, H. J., Xu, T., Lee, J. Y., Ledbetter, A. & Guo, L. J. Photonic color filters integrated with organic solar cells for energy harvesting. ACS Nano 5, 7055–7060 (2011).
Mason, C. W. Structural colors in insects. I. J. Phys. Chem. 30, 383–395 (1925).
Mason, C. W. Structural colors in insects. II. J. Phys. Chem. 31, 321–354 (1926).
Mason, C. W. Structural colors in insects. III. J. Phys. Chem. 31, 1856–1872 (1926).
Kinoshita, S. & Yoshioka, S. Structural colors in nature: the role of regularity and irregularity in the structure. ChemPhysChem 6, 1442–1459 (2005).
Saito, A. Material design and structural color inspired by biomimetic approach. Sci. Technol. Adv. Mater. 12, 064709 (2011).
Johansen, V. E., Andkjaer, J. & Sigmund, O. Design of structurally colored surfaces based on scalar diffraction theory. J. Opt. Soc. Am. B 31, 207–217 (2014).
Zeng, B., Gao, Y. & Bartoli, F. J. Ultrathin nanostructured metals for highly transmissive plasmonic subtractive color filters. Sci. Rep. 3, 2840 (2013).
Shrestha, V. R., Lee, S. S., Kim, E. S. & Choi, D. Y. Aluminum plasmonics based highly transmissive polarization-independent subtractive color filters exploiting a nanopatch array. Nano Lett. 14, 6672–6678 (2014).
Lee, H. S., Yoon, Y. T., Lee, S. S., Kim, S. H. & Lee, K. D. Color filter based on a subwavelength patterned metal grating. Opt. Express 15, 15457–15463 (2007).
Shrestha, V. R., Lee, S. S., Kim, E. S. & Choi, D. Y. Polarization-tuned dynamic color filters incorporating a dielectric-loaded aluminum nanowire array. Sci. Rep. 5, 12450 (2015).
Xu, T., Wu, Y. K., Luo, X. & Guo, L. J. Plasmonic nanoresonators for high-resolution colour filtering and spectral imaging. Nat. Commun. 1, 59 (2010).
Do, Y. S. et al. Plasmonic color filter and its fabrication for large-area applications. Adv. Opt. Mater. 1, 133–138 (2013).
Cheng, F., Ga, J., Luk, T. S. & Yang, X. Structural color printing based on plasmonic metasurfaces of perfect light absorption. Sci. Rep. 5, 11045 (2015).
Franklin, D. et al. Polarization-independent actively tunable colour generation on imprinted plasmonic surfaces. Nat. Commun. 6, 7337 (2015).
Kaplan, A. F., Xu, T. & Guo, L. J. High efficiency resonance-based spectrum filters with tunable transmission bandwidth fabricated using nanoimprint lithography. Appl. Phys. Lett. 99, 143111 (2011).
Yoon, Y. T., Park, C. H. & Lee, S. S. Highly efficient color filter incorporating a thin metal-dielectric resonant structure. Appl. Phys. Express 5, 022501 (2012).
Park, C. H., Yoon, Y. T. & Lee, S. S. Polarization-independent visible wavelength filter incorporating a symmetric metal-dielectric resonant structure. Opt. Express 20, 23769–23777 (2012).
Park, C. H. et al. Electrically tunable color filter based on a polarization-tailored nano-photonic dichroic resonator featuring an asymmetric subwavelength grating. Opt. Express 21, 28783–28793 (2013).
Shrestha, V. R., Park, C. S. & Lee, S. S. Enhancement of color saturation and color gamut enabled by a dual-band color filter exhibiting an adjustable spectral response. Opt. Express 22, 3691–3704 (2014).
Yoon, Y. T. & Lee, S. S. Transmission type color filter incorporating a silver film based etalon. Opt. Express 18, 5344–5349 (2010).
Lee, K. T., Seo, S., Lee, J. Y. & Guo, L. J. Ultrathin metal-semiconductor-metal resonator for angle invariant visible band transmission filters. Appl. Phys. Lett. 104, 231112 (2014).
Park, C. S., Shrestha, V. R., Lee, S. S., Kim, E. S. & Choi, D. Y. Omnidirectional color filters capitalizing on a nano-resonator of Ag-TiO2-Ag integrated with a phase compensating dielectric overlay. Sci. Rep. 5, 8467 (2015).
Yang, C. et al. Compact multilayer film structure for angle insensitive color filtering. Sci. Rep. 5, 9285 (2015).
Lee, K. T., Seo, S., Lee, J. Y. & Guo, L. J. Strong resonance effect in a lossy medium-based optical cavity for angle robust spectrum filters. Adv. Mater. 26, 6324–6328 (2014).
Lee, K. T., Seo, S. & Guo, L. J. High-color-purity subtractive color filters with a wide viewing angle based on plasmonic perfect absorbers. Adv. Opt. Mater. 3, 347–352 (2015).
Li, Z., Butun, S. & Aydin, K. Large-area, lithography-free super absorbers and color filters at visible frequencies using ultrathin metallic films. ACS Photonics 2, 183–188 (2015).
Song, H. et al. Nanocavity enhancement for ultra-thin film optical absorber. Adv. Mater. 26, 2737–2743 (2014).
Johnson, P. B. & Christy, R. W. Optical constants of the noble metals. Phys. Rev. B 6, 4370–4379 (1972).
Liang, R. Biomedical Optical Imaging Technologies: Design and Applications (Springer, 2013), Chapter 4.
Zhang, D. et al. Reflection hologram solar spectrum-splitting filters. Proc. SPIE 8468, 846807 (2012).
Born, M. & Wolf, E. Principles of Optics, 7th ed. (Cambridge University Press, New York, USA, 1999).
Kuehni, R. G. Color: An Introduction to Practice and Principles (John Wiley & Sons, 2013).
Macleod, H. A. Thin-Film Optical Filters, 4th ed. (CRC Press, 2010).
Sabnis, R. W. Color filter technology for liquid crystal displays, Displays 20, 119–129 (1999).
Sugiura, T. Dyed color filters for liquid-crystal displays, J. Soc. Inf. Display 1, 188–180 (1993).
Frey, L. et al. Color filters including infrared cut-off integrated on CMOS image sensor. Opt. Express 19, 13073–13080 (2011).
Acknowledgements
This work was supported by a National Research Foundation of Korea grant funded by the Korean government (MSIP) (No. 2011-0030079) and by a research grant from Kwangwoon University in 2016. The work was partly supported by the Australian Research Council Future Fellowship (FT110100853, Dr. Duk-Yong Choi) and was performed in part at the ACT node of the Australian National Fabrication Facility. The authors are grateful to Mr. Chanwoo J. Lee, Seoul Foreign School, Seoul, S. Korea, for his help with the editing of the manuscript and Prof. C. K. Hwangbo and Mr. W. Y. Kim, Inha University, Incheon, S. Korea, for their valuable help with the device fabrication.
Author information
Authors and Affiliations
Contributions
C.S. and V.R. are equally responsible for the design, optical characterization, analysis of the device and writing of the manuscript; S.S. supervised the analysis and co-wrote the manuscript; D.Y. fabricated the device, captured the SEM images and measured the thickness and index of refraction of the deposited films. All authors discussed the results and implications and commented on the manuscript at all stages.
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Electronic supplementary material
Rights and permissions
This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/
About this article
Cite this article
Park, CS., Shrestha, V., Lee, SS. et al. Trans-Reflective Color Filters Based on a Phase Compensated Etalon Enabling Adjustable Color Saturation. Sci Rep 6, 25496 (2016). https://doi.org/10.1038/srep25496
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/srep25496
- Springer Nature Limited
This article is cited by
-
Narrowband and flexible perfect absorber based on a thin-film nano-resonator incorporating a dielectric overlay
Scientific Reports (2020)
-
Lithography-Free Planar Band-Pass Reflective Color Filter Using A Series Connection of Cavities
Scientific Reports (2019)
-
Flexible High-Color-Purity Structural Color Filters Based on a Higher-Order Optical Resonance Suppression
Scientific Reports (2019)
-
Plasmonic- and dielectric-based structural coloring: from fundamentals to practical applications
Nano Convergence (2018)
-
High-performance colorful semitransparent perovskite solar cells with phase-compensated microcavities
Nano Research (2018)