Abstract
We propose an all-optical integrated nonreciprocal device on the optomechanical platform with a large nonreciprocal bandwidth and low operating power. The device is based on an asymmetric silicon coupler consisting of two branches. One of them is a conventional strip waveguide fixed on the substrate and the other is a freestanding nanostring suspended above a groove in the substrate. When light is launched into the coupler, the optical gradient force between the freestanding nanostring and the underlying substrate leads to the deflection of the nanostring and finally results in destruction of the initial phase-matching condition between the two branches. The suspended branch would achieve distinct deflections when light is incident from different ports. The simulation results show a nonreciprocal bandwidth of 13.1 nm with operating power of 390 μW. With the advantages of simple structure, low power consumption and large operating bandwidth, our work provides a promising solution for on-chip passive nonreciprocal device.
Similar content being viewed by others
Introduction
Silicon photonics is deemed as a promising candidate meeting the urgent requirements for ultra-low power consumption, ultra-high speed computing and ultra-high density communication. It provides a competitive complementary metal-oxide semiconductor (CMOS) compatible platform with ultra-compact scale and low fabricating cost. In the past decade, various components have been exploited on the silicon-on-insulator (SOI) platform, such as optical filter1, switch2, modulator3, isolator4 and polarization splitter5.
However, for the applications in nonlinear optics6, silicon seems unlike to completely fulfill this role since its Kerr nonlinear refractive index n2 is about only 6 × 10−18 m2·W−1. Considering that Kerr nonlinearity is an intrinsic material property, to achieve a certain refractive index variation Δn = n2I, we often have to increase optical intensity I. High intensity would lead to some undesired results, such as high power consumption and additional insertion loss due to nonlinear absorption. To enhance the nonlinear effects in the silicon waveguide, schemes involved with thermo-optic effect7,8 and slow light effect9,10 are employed as alternative solutions. In addition, another extremely strong nonlinearity induced by optomechanical effect gets increasingly more attentions in recent years11,12.
In 2005, Povinelli et al. gives a theoretical investigation of the optical gradient force between parallel waveguides13. Since then, many optomechanical structures are proposed and demonstrated14,15,16,17,18, such as nanowaveguide11,19,20,21,22,23, microcavity24,25,26,27,28,29,30,31,32,33 and photonic crystal cavity34,35,36,37,38,39. The field of optomechanics has already been expanded to the single-photon level40. Various applications are also exploited, such as frequency comb41, Q-factor tunable microring resonator42, optical switch43 and optical detector44. The suspended waveguide deforms owing to optical gradient force and accordingly its effective index varies, which is called mechanical Kerr effect11,12,45. Mechanical Kerr effect could be up to 7 orders of magnitude larger than the conventional Kerr effect of materials22,23.
Among the photonic applications on SOI, optical nonreciprocal devices take a significant role. Optical nonreciprocity refers that light passes in one direction but gets blocked in the opposite direction. Generally, to realize optical nonreciprocity, Lorentz reciprocity must be broken46. Various methods are reported, such as those relying on magneto-optical effect47 and a time-dependent refractive index48,49,50,51. In addition, all-optical nonreciprocal approaches based on the Kerr nonlinearity and thermo-optic effect of materials have already been demonstrated4,8,52,53,54,55,56,57. Yet they are either with high operating power, e.g. 3.1 W52, or with a very narrow 10-dB nonreciprocal transmission bandwidth (NTB) and high insertion loss, e.g. 50 pm with 12 dB insertion loss4. There are also several schemes based on mechanical Kerr effect in optomechanical devices. In 2009, Manipatruni et al. demonstrated a delicate nonreciprocal device based on a Fabry-Perot cavity58. In 2012, Hafezi et al. proposed an intriguing theoretical scheme of nonreciprocal device consisting of a microtoroidal cavity optomechanical system59. Their bandwidths are 250 pm and a few MHz, respectively, which are still too narrow for practical applications.
In this paper, we propose a novel nonreciprocal structure based on an asymmetric optomechanical coupler. One of the coupler branches is a suspended nanostring and the other is fixed on the substrate. When light passes through the suspended branch, the waveguide bends to the substrate and exhibits mechanical Kerr nonlinearity. Since the nanostring deflects at different levels according to routings of light, it manifests optical nonreciprocity. The device possesses a large 10-dB NTB of 13.1 nm with low input power of 390 μW.
Results
Principle of the optomechanical nonreciprocal device
Figure 1 shows the schematic illustration of the nonreciprocal device based on an asymmetric optomechanical coupler. The coupler comprises two branches. Branch 1 is a suspended double-clamped nanostring above a groove in the substrate. The groove is often obtained by etching the substrate with hydrofluoric acid. Branch 2 is fixed on the silicon dioxide substrate. When the incident power is very low, such as P = 1 μW, the device operates in the linear regime and the two branches satisfy the phase-matching condition. Thus the coupler shows reciprocal property. As a light beam exceeding the threshold power is launched, Branch 1 bends to the substrate and its effective index varies. Thereby the two branches no longer satisfy the initial phase-matching condition. Because the freestanding branch deforms at distinct levels according to the input ports, the device exhibits nonreciprocity. On the one hand, light incident from Port 4 gets transferred and outputs from Port 1 with very low insertion loss and this is defined as the forward direction of light. On the other hand, light in the backward routing from Port 1 to Port 4 gets blocked.
Schematic illustration of the asymmetric optomechanical coupler.
Branch 1 is a freestanding silicon waveguide in close proximity to the underlying silicon dioxide substrate. Branch 2 is a conventional stripe waveguide fixed on the substrate. The backward transmission light is incident from Port 1 and emits from Port 4. The forward transmission route is just opposite.
Device structure, mode distribution and optical gradient force
As depicted in Figure 2(a), the cross section mode distribution at wavelength λ0 = 1550 nm is acquired with COMSOL Multiphysics, a commercial software based on finite element modeling method. Considering that Branch 1 is surrounded by air, it is slightly wider than Branch 2 to satisfy the phase-matching condition. The widths of the two branches are W1 = 500 nm and W2 = 455 nm, respectively. The heights of the branches are both H = 110 nm. The separation between the two waveguide S = 730 nm. The initial gap between the suspended waveguide and the substrate G0 = 100 nm. The device parameters have been demonstrated60. The length of the coupling region L is set to the half-beat length L0 = π/(2κ), where κ is the coupling coefficient. For a linear coupler, at the half-beat length L0 light incident from one branch would make a complete coupling to the other branch. Here in our coupler, the coupling coefficient κ = 1.468 × 104 m−1 and the corresponding length of coupling region L = L0 = 107 μm.
As power ascends, the optical gradient force between Branch 1 and the underlying substrate causes that the suspended nanostring starts to deform. The optical gradient force of unit length and unit power f could be described as the follow61,62:
![](http://media.springernature.com/lw261/springer-static/image/art%3A10.1038%2Fsrep08657/MediaObjects/41598_2015_Article_BFsrep08657_Equ1_HTML.jpg)
where F and P represent the force and the optical power in the whole waveguide, respectively. Here the variable d stands for the actual separation between the waveguide and the substrate when light is incident. In its initial non-deflection state, d = G0 = 100 nm. As indicated by Eq. (1), there is a positive correlation between the derivative of effective index and the optical force.
As shown in Figure 2(b), the effective index increases as the gap reduces. When the suspended branch gets closer to the substrate, in other word the separation d is smaller, there will be more proportion of optical field in the substrate and thus the effective index becomes higher. Furthermore, the effective index varies more rapidly when d is smaller. As a result, the corresponding optical gradient force gets larger when Branch 1 gets nearer to the substrate, where the minus sign represents an attractive force in the –X direction. As the interval between them becomes large enough, the force falls to zero. Here for the initial state, d = G0 = 100 nm, the optical gradient force f = −1.67 pN·μm−1·mW−1. Indeed there also exists a horizontal optical gradient force between the two coupler branches. Nonetheless as indicated by Eq. (1) the optical force between two media decays almost exponentially as their separation increases. Obviously the horizontal gap S is much larger than the vertical gap G0, . As a consequence, the horizontal optical force between Branch 1 and Branch 2 is far smaller than the vertical optical force between Branch 1 and the substrate and thereby the effective index variation resulting from horizontal displacement is also far less than the vertical one. So for our device the horizontal gradient force could be neglected.
Optical field distribution and the deflection along the Z direction
The light propagation properties are usually described with nonlinear coupler mode equations63:
![](http://media.springernature.com/lw379/springer-static/image/art%3A10.1038%2Fsrep08657/MediaObjects/41598_2015_Article_BFsrep08657_Equ2_HTML.jpg)
![](http://media.springernature.com/lw379/springer-static/image/art%3A10.1038%2Fsrep08657/MediaObjects/41598_2015_Article_BFsrep08657_Equ3_HTML.jpg)
where A is the slowly varying complex amplitude and F is the term of free carrier dispersion (FCD). The subscripts 1 and 2 denote Branch 1 and Branch 2, respectively. The loss α contains the linear loss αLinear, the loss caused by two photon absorption (TPA) αTPA and the loss caused by free carrier absorption (FCA) αFCA. Υ and δ represent nonlinear coefficient and detuning, separately. The coupling coefficient κ(z) and detuning δ(z) vary as functions of Z due to the displacement distribution along the Z direction caused by the optical gradient force.
The deflection of the freestanding nanostring is determined by Euler Bernoulli beam theory:
![](http://media.springernature.com/lw259/springer-static/image/art%3A10.1038%2Fsrep08657/MediaObjects/41598_2015_Article_BFsrep08657_Equ4_HTML.jpg)
where u, usually a negative value, is the deflection of the nanostring. E = 131 × 109 Pa is the Young's modulus of silicon and a = W1 × H is the cross-section area of Branch 1. Here in our device, d = G0 + u = 100 [nm] + u. Substituting Eq. (1) into Eq. (4), we obtain the following equation:
![](http://media.springernature.com/lw321/springer-static/image/art%3A10.1038%2Fsrep08657/MediaObjects/41598_2015_Article_BFsrep08657_Equ5_HTML.jpg)
The double-clamped nanostring obeys the boundary conditions of u(0) = u′(0) = u(L) = u′(L) = 0.
Optical switching characteristic and nonreciprocity
The conventional Kerr nonlinear effect of materials is defined as n = n0 + n2I. Similarly, in the optomechanical device, the deflection of the suspended nanostring and the corresponding variation of effective index show positive correlation to the incident power. The mechanical Kerr effect could be evaluated by effective index changes at the point where the maximum displacement is achieved. n(u = umax) = n0 + Δnmax, where umax, usually a negative value, is the maximum deflection of the nanostring. The mechanical Kerr coefficient Υom and the mechanical Kerr index nom are defined as the follow12,45: Υom = k0Δnmax/P, nom = AeffΔnmax/P, where k0 is the wavenumber in vacuum and Aeff is the effective area. As Figure 3(a) depicts, at the point where the maximum deflection is achieved, the effective index variation is the largest. Here the incident power P = 390 μW, the maximum deflection |umax| = 29 nm and its corresponding effective index variation is 0.0174. Thus it could be derived that nom = 6.1 × 10−12 m2·W−1 and Υom = 1.8 × 108 m−1·W−1.
(a) Deflection of the freestanding Branch 1 and the corresponding effective index variation along the Z direction when the light is launched into Port 1. The negative sign of deflection represents that the branch deforms towards the substrate. (b) Transmittance (Tij) as a function of input power, where i and j are the numbers of input and output ports, respectively. Black and red solid curves: light is incident from the Port 1 and outputs from Port 4 of Branch 2 and Port 2 of Branch 1, respectively. Blue and magenta curve: light is incident from the Port 4 and then outputs from Port 1 of Branch 1 and Port 3 of Branch 2, respectively. T14 and T41 represent the backward and the forward transmission, separately.
As the incident power continues to rise, the device doesn't remain in the linear regime and shows nonlinear switching characteristic and nonreciprocity. As mentioned, the detuning δ between the two branches due to the nanostring deflection is power dependent and therefore the transmittance of the device is also power dependent. Taking the black curve T14 in Fig. 3(b) for instance, when the light is incident from Port 1, the transmittance at Port 4 falls as power rises, from 100% at P ~ 1 μW down to approximate to zero at P = 390 μW. Then as the power increases continuously, some properties such as the period of coupling changes and the zero-output condition is not satisfied any more. Just like the nonlinear optical switching based on conventional Kerr nonlinear effect, the transmittance bounces off zero as power continues to rise.
Likewise, when light is incident from Port 4 on the fixed branch, there is also a power dependent switching characteristic. However, because the power proportions in the suspended waveguide are different, the deflections of the suspended branch and the effective index variations achieved are distinct. The maximum deflections of the freestanding nanostring are 15 nm and 29 nm for the forward and the backward transmission, respectively. The distinction finally leads to the difference in their switching thresholds, ~400 μW for the forward transmission and ~280 μW for the opposite direction. As indicated in Fig. 3(b), the black curve of the backward transmission doesn't overlap the blue curve of the forward transmission, in other word T14 ≠ T41. The shadow region in Fig. 3(b), manifests a nonreciprocal transmission window.
As portrayed in Figure 4, with incident power of 390 μW, the transmission spectra of the forward and the backward are apparently different. At the wavelength of 1550.85 nm, the forward transmission is −3.7 dB and the backward transmission is only −58.2 dB. Thus the nonreciprocal transmission ratio (NTR) reaches its peak of 54.5 dB. Since resonance structures are not employed in our scheme, there is no inherent bandwidth limit and the bandwidth is relatively large. The 10-dB NTB is 13.1 nm corresponding to a wavelength range from 1542.5 nm to 1555.6 nm. In addition, there are also no nonlinear losses owing to low operating power. As a consequence, the insertion loss is less than 3.9 dB in the nonreciprocal band.
Discussion
Figures 5(a) and 5(b) show the power distribution along the Z direction for light incident from Port 1 and Port 4, respectively. Figs. 5(c) and 5(d) display the corresponding deflections of the nanostring, respectively. As indicated by the black curves in Figs. 5(c) and 5(d), ultra-low incident power such as P = 1 μW is insufficient to deform the nanostring. Thus the device functions in the linear regime and light gets transferred to the other branch as depicted by the black curves in Figs. 5(a) and 5(b). As shown in Figs. 5(c) and 5(d), when the power ascends the nanostring bends more heavily to the substrate and the coupler doesn't remain in the linear regime.
(a) and (b) Normalized power distribution in Branch 1 along the Z direction. (c) and (d) Deflection of the freestanding nanostring along the Z direction. (a) and (c) Light is launched into Port 1. (b) and (d) Light is launched into Port 4. The black curves show the linear properties of the coupler, at very low power P = 1 μW. The rest curves show the situations corresponding to larger powers from 100 μW to 500 μW.
In the conventional case, there is only one individual independent suspended nanostring and thus light power is uniform along the waveguide. The deflection of the nanostring is often described with the analytic expression as the follow11:
![](http://media.springernature.com/lw274/springer-static/image/art%3A10.1038%2Fsrep08657/MediaObjects/41598_2015_Article_BFsrep08657_Equ6_HTML.jpg)
where umax is always achieved at the center of the freestanding nanostring z = L/2. Here in our coupler, the deflection of one branch approximately accords with the expression, but umax is different. umax depends on not only power in the nanostring but also the power distribution. As illustrated in Figs. 5(a) and 5(b), it is very obvious that more power is in Branch 1 for the backward transmission than the opposite. As a result, the deflection in Fig. 5(c) is larger than that in Fig. 5(d) with the same incident power. On the other hand, the different power distribution would cause different deflections. In our device the power is non-uniform along the Z direction. According to Equations (4) and (5), the same force acts on the center of the nanostring leads to a larger deflection than on the point off the center.
Thermal noises would lead to deflection of the suspended nanostring even without incident light. The thermal noise arising from thermal Brownian motion is characterized by the root-mean-square displacement amplitude urms64,65,66,67,
![](http://media.springernature.com/lw256/springer-static/image/art%3A10.1038%2Fsrep08657/MediaObjects/41598_2015_Article_BFsrep08657_Equ7_HTML.jpg)
where ωm is the fundamental mechanical frequency, meff is the effective mass of the beam, kB is Boltzmann constant and T is the ambient temperature (300 K). The natural frequency of the nth mechanical mode ωnm is described by the equation62,
![](http://media.springernature.com/lw246/springer-static/image/art%3A10.1038%2Fsrep08657/MediaObjects/41598_2015_Article_BFsrep08657_Equ8_HTML.jpg)
where μ is the mass per unit length and I is the second moment of area. For a double-clamped beam, βn satisfies the equation cos(βnL) cosh(βnL) − 1 = 0. For the fundamental mechanical mode, β1L = 4.73004. Here the fundamental mechanical frequency of our device ωm = 4.64 × 105 rad/s and the root-mean-square displacement amplitude urms = 1.18 nm. Since ωm ∝ H/L2, to increase natural mechanical frequencies, we could reduce L and increase H. Since urms ∝ T1/2L3/2/H3/2W11/2, in order to suppress thermal noises, we could reduce L and increase H and W1. In addition as the ambient temperature T falls, thermal noises would be also lower accordingly.
Conclusion
In summary, we proposed an asymmetric optomechanical coupler exhibiting nonreciprocity induced by mechanical Kerr effect. The device shows a large NTB, high NTR, low insertion loss and low operating power. This work provides a promising solution for all-optical nonreciprocal device on a silicon chip.
Methods
The nonlinear coupled mode equations are solved by a differential method. In the equations, the parameters κ and δ are given as the follow68,
![](http://media.springernature.com/lw284/springer-static/image/art%3A10.1038%2Fsrep08657/MediaObjects/41598_2015_Article_BFsrep08657_Equ9_HTML.jpg)
![](http://media.springernature.com/lw244/springer-static/image/art%3A10.1038%2Fsrep08657/MediaObjects/41598_2015_Article_BFsrep08657_Equ10_HTML.jpg)
where βe and βo are the propagation constants of even supermode and odd supermode, respectively; β1 and β2 are the propagation constants of individual guided modes in Branch 1 and Branch 2, respectively. The propagation constants of the cross section are calculated by 2D mode analysis of COMSOL Multiphysics.
Under continuous wave conditions, the final solution is a stationary solution. The coupled mode Eqs. (2) and (3) and the mechanical Eqs. (4) and (5), are jointly solved with self-made MATLAB codes by an iteration method, until the difference between two calculation results is less than the tolerant error.
Then the optical field distribution of the coupler with the calculated waveguide deformation is also verified by 3D simulations in COMSOL wave optics module. As shown in Fig. 6, the simulation results fit well with the results given by the self-made MATLAB code.
References
Xia, F., Rooks, M., Sekaric, L. & Vlasov, Y. Ultra-compact high order ring resonator filters using submicron silicon photonic wires for on-chip optical interconnects. Opt. Express 15, 11934–11941 (2007).
Almeida, V. R., Barrios, C. A., Panepucci, R. R. & Lipson, M. All-optical control of light on a silicon chip. Nature 431, 1081–1084 (2004).
Reed, G. T., Mashanovich, G., Gardes, F. Y. & Thomson, D. J. Silicon optical modulators. Nat. Photonics 4, 518–526 (2010).
Fan, L. et al. An All-Silicon Passive Optical Diode. Science 335, 447–450 (2012).
Fukuda, H. et al. Ultrasmall polarization splitter based on silicon wire waveguides. Opt. Express 14, 12401–12408 (2006).
Leuthold, J., Koos, C. & Freude, W. Nonlinear silicon photonics. Nat. Photonics 4, 535–544 (2010).
Xu, Q. & Lipson, M. Carrier-induced optical bistability in silicon ring resonators. Opt. Lett. 31, 341–343 (2006).
Wang, J. et al. A Theoretical Model for an Optical Diode Built With Nonlinear Silicon Microrings. J. Lightwave Technol. 31, 313–321 (2013).
Baba, T. Slow light in photonic crystals. Nat. Photonics 2, 465–473 (2008).
Boyd, R. W. & Gauthier, D. J. Controlling the Velocity of Light Pulses. Science 326, 1074–1077 (2009).
Pernice, W. H. P., Li, M. & Tang, H. X. A mechanical Kerr effect in deformable photonic media. Appl. Phys. Lett. 95, 123507 (2009).
Ma, J. & Povinelli, M. L. Mechanical Kerr nonlinearities due to bipolar optical forces between deformable silicon waveguides. Opt. Express 19, 10102–10110 (2011).
Povinelli, M. L. et al. Evanescent-wave bonding between optical waveguides. Opt. Lett. 30, 3042–3044 (2005).
Kippenberg, T. J. & Vahala, K. J. Cavity Opto-Mechanics. Opt. Express 15, 17172–17205 (2007).
Favero, I. & Karrai, K. Optomechanics of deformable optical cavities. Nat. Photonics 3, 201–205 (2009).
Van Thourhout, D. & Roels, J. Optomechanical device actuation through the optical gradient force. Nat. Photonics 4, 211–217 (2010).
Ma, J. & Povinelli, M. L. Applications of optomechanical effects for on-chip manipulation of light signals. Curr. Opin. Solid State Mater. Sci. 16, 82–90 (2012).
Metcalfe, M. Applications of cavity optomechanics. Appl. Phys. Rev. 1, 031105 (2014).
Pernice, W. H. P., Li, M. & Tang, H. X. Theoretical investigation of the transverse optical force between a silicon nanowire waveguide and a substrate. Opt. Express 17, 1806–1816 (2009).
Li, M., Pernice, W. H. P. & Tang, H. X. Tunable bipolar optical interactions between guided lightwaves. Nat. Photonics 3, 464–468 (2009).
Roels, J. et al. Tunable optical forces between nanophotonic waveguides. Nat. Nanotechnol. 4, 510–513 (2009).
Butsch, A., Conti, C., Biancalana, F. & Russell, P. S. J. Optomechanical Self-Channeling of Light in a Suspended Planar Dual-Nanoweb Waveguide. Phys. Rev. Lett. 108, 093903 (2012).
Conti, C., Butsch, A., Biancalana, F. & Russell, P. S. J. Dynamics of optomechanical spatial solitons in dual-nanoweb structures. Phys. Rev. A. 86, 013830 (2012).
Rakich, P. T., Popovic, M. A., Soljacic, M. & Ippen, E. P. Trapping, corralling and spectral bonding of optical resonances through optically induced potentials. Nat. Photonics 1, 658–665 (2007).
Wiederhecker, G. S., Chen, L., Gondarenko, A. & Lipson, M. Controlling photonic structures using optical forces. Nature 462, 633–636 (2009).
Rosenberg, J., Lin, Q. & Painter, O. Static and dynamic wavelength routing via the gradient optical force. Nat. Photonics 3, 478–483 (2009).
Povinelli, M. et al. High-Q enhancement of attractive and repulsive optical forces between coupled whispering-gallery- mode resonators. Opt. Express 13, 8286–8295 (2005).
Carmon, T. & Vahala, K. J. Modal Spectroscopy of Optoexcited Vibrations of a Micron-Scale On-Chip Resonator at Greater than 1 GHz Frequency. Phys. Rev. Lett. 98, 123901 (2007).
Anetsberger, G., Riviere, R., Schliesser, A., Arcizet, O. & Kippenberg, T. J. Ultralow-dissipation optomechanical resonators on a chip. Nat. Photonics 2, 627–633 (2008).
Anetsberger, G. et al. Near-field cavity optomechanics with nanomechanical oscillators. Nat. Phys. 5, 909–914 (2009).
Weis, S. et al. Optomechanically Induced Transparency. Science 330, 1520–1523 (2010).
Verhagen, E., Deleglise, S., Weis, S., Schliesser, A. & Kippenberg, T. J. Quantum-coherent coupling of a mechanical oscillator to an optical cavity mode. Nature 482, 63–67 (2012).
Eichenfield, M., Michael, C. P., Perahia, R. & Painter, O. Actuation of micro-optomechanical systems via cavity-enhanced optical dipole forces. Nat. Photonics 1, 416–422 (2007).
Eichenfield, M., Camacho, R., Chan, J., Vahala, K. J. & Painter, O. A picogram- and nanometre-scale photonic-crystal optomechanical cavity. Nature 459, 550–555 (2009).
Eichenfield, M., Chan, J., Camacho, R. M., Vahala, K. J. & Painter, O. Optomechanical crystals. Nature 462, 78–82 (2009).
Alegre, T. P. M., Perahia, R. & Painter, O. Optomechanical zipper cavity lasers: theoretical analysis of tuning range and stability. Opt. Express 18, 7872–7885 (2010).
Safavi-Naeini, A. H. et al. Electromagnetically induced transparency and slow light with optomechanics. Nature 472, 69–73 (2011).
Chan, J. et al. Laser cooling of a nanomechanical oscillator into its quantum ground state. Nature 478, 89–92 (2011).
Notomi, M., Taniyama, H., Mitsugi, S. & Kuramochi, E. Optomechanical Wavelength and Energy Conversion in High-Q Double-Layer Cavities of Photonic Crystal Slabs. Phys. Rev. Lett. 97, 023903 (2006).
Nunnenkamp, A., Borkje, K. & Girvin, S. M. Single-Photon Optomechanics. Phys. Rev. Lett. 107 (2011).
Butsch, A., Koehler, J. R., Noskov, R. E. & Russell, P. S. J. CW-pumped single-pass frequency comb generation by resonant optomechanical nonlinearity in dual-nanoweb fiber. Optica. 1, 158–164 (2014).
Long, Y. & Wang, J. Optically-controlled extinction ratio and Q-factor tunable silicon microring resonators based on optical forces. Sci. Rep. 4, 5409; 10.1038/srep05409 (2014).
Fong, K. Y., Pernice, W. H. P., Li, M. & Tang, H. X. Tunable optical coupler controlled by optical gradient forces. Opt. Express 19, 15098–15108 (2011).
Bagci, T. et al. Optical detection of radio waves through a nanomechanical transducer. Nature 507, 81–85 (2014).
Yu, Y. F. et al. Force-induced optical nonlinearity and Kerr-like coefficient in opto-mechanical ring resonators. Opt. Express 20, 18005–18015 (2012).
Jalas, D. et al. What is - and what is not - an optical isolator. Nat. Photonics 7, 579–582 (2013).
Bi, L. et al. On-chip optical isolation in monolithically integrated non-reciprocal optical resonators. Nat. Photonics 5, 758–762 (2011).
Yu, Z. & Fan, S. Complete optical isolation created by indirect interband photonic transitions. Nat. Photonics 3, 91–94 (2009).
Kang, M. S., Butsch, A. & Russell, P. S. J. Reconfigurable light-driven opto-acoustic isolators in photonic crystal fibre. Nat. Photonics 5, 549–553 (2011).
Lira, H., Yu, Z., Fan, S. & Lipson, M. Electrically driven nonreciprocity induced by interband photonic transition on a silicon chip. Phys. Rev. Lett. 109, 033901 (2012).
Tzuang, L. D., Fang, K., Nussenzveig, P., Fan, S. & Lipson, M. Non-reciprocal phase shift induced by an effective magnetic flux for light. Nat. Photonics 8, 701–705 (2014).
Gallo, K., Assanto, G., Parameswaran, K. R. & Fejer, M. M. All-optical diode in a periodically poled lithium niobate waveguide. Appl. Phys. Lett. 79, 314–316 (2001).
Soljacic, M., Luo, C., Joannopoulos, J. D. & Fan, S. Nonlinear photonic crystal microdevices for optical integration. Opt. Lett. 28, 637–639 (2003).
Poulton, C. G. et al. Design for broadband on-chip isolator using stimulated Brillouin scattering in dispersion-engineered chalcogenide waveguides. Opt. Express 20, 21235–21246 (2012).
Zhang, Y. et al. Silicon optical diode based on cascaded photonic crystal cavities. Opt. Lett. 39, 1370–1373 (2014).
Xu, M. et al. Push-Pull Optical Nonreciprocal Transmission in Cascaded Silicon Microring Resonators. IEEE Photonics J. 5, 2200307–2200307 (2013).
Fan, L. et al. Silicon optical diode with 40 dB nonreciprocal transmission. Opt. Lett. 38, 1259–1261 (2013).
Manipatruni, S., Robinson, J. T. & Lipson, M. Optical Nonreciprocity in Optomechanical Structures. Phys. Rev. Lett. 102, 213903 (2009).
Hafezi, M. & Rabl, P. Optomechanically induced non-reciprocity in microring resonators. Opt. Express 20, 7672–7684 (2012).
Li, M. et al. Harnessing optical forces in integrated photonic circuits. Nature 456, 480–484 (2008).
Rakich, P. T., Popovic, M. A. & Wang, Z. General treatment of optical forces and potentials in mechanically variable photonic systems. Opt. Express 17, 18116–18135 (2009).
Guo, X., Zou, C.-L., Ren, X.-F., Sun, F.-W. & Guo, G.-C. Broadband opto-mechanical phase shifter for photonic integrated circuits. Appl. Phys. Lett. 101, 071114 (2012).
Agrawal, G. P. Applications of nonlinear fiber optics. (Academic Press, 2008).
Sun, X., Zheng, J., Poot, M., Wong, C. W. & Tang, H. X. Femtogram Doubly Clamped Nanomechanical Resonators Embedded in a High-Q Two-Dimensional Photonic Crystal Nanocavity. Nano Lett. 12, 2299–2305 (2012).
Basarir, O., Bramhavar, S. & Ekinci, K. L. Near-field optical transducer for nanomechanical resonators. Appl. Phys. Lett. 97, 253114 (2010).
Basarir, O., Bramhavar, S. & Ekinci, K. L. Monolithic integration of a nanomechanical resonator to an optical microdisk cavity. Opt. Express 20, 4272–4279 (2012).
Hu, Y.-W., Xiao, Y.-F., Liu, Y.-C. & Gong, Q. Optomechanical sensing with on-chip microcavities. Front. Phys. 8, 475–490 (2013).
Okamoto, K. Fundamentals of Optical Waveguides. (Academic Press, 2010).
Acknowledgements
The authors are grateful to Prof. Hong X. Tang from Yale University. This work was supported by the National Natural Science Foundation of China (Grant No. 61307075), the Specialized Research Fund for the Doctoral Program of Higher Education of China (Grant No. 20120142120067) and the Fundamental Research Funds for the Central Universities (HUST: 2014TS019).
Author information
Authors and Affiliations
Contributions
Z.Q.W. and L.S. conceived the design. Z.Q.W. performed the numerical simulations and Y.L. assisted with the numerical simulation. Z.Q.W. analyzed the data and X.B.X. assisted with the data analysis. Z.Q.W. prepared the figures and wrote the manuscript. L.S. and X.L.Z. edited the manuscript. L.S. supervised the project. All authors discussed the results and commented on the manuscript.
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Rights and permissions
This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article's Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder in order to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/
About this article
Cite this article
Wang, Z., Shi, L., Liu, Y. et al. Optical Nonreciprocity in Asymmetric Optomechanical Couplers. Sci Rep 5, 8657 (2015). https://doi.org/10.1038/srep08657
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/srep08657
- Springer Nature Limited
This article is cited by
-
Optomechanical ratchet resonators
Science China Physics, Mechanics & Astronomy (2022)
-
Multi-band unidirectional reflectionlessness of single photons via intermode backscattering
Quantum Information Processing (2021)
-
Perfect optical nonreciprocity in a double-cavity optomechanical system
Frontiers of Physics (2019)
-
Stability Formulation for Integrated Opto-mechanic Phase Shifters
Scientific Reports (2018)
-
Generalized non-reciprocity in an optomechanical circuit via synthetic magnetism and reservoir engineering
Nature Physics (2017)