Abstract
Long-term observational datasets that record and quantify variability, changes and trends in beach morphology at sandy coastlines together with the accompanying wave climate are rare. A monthly beach profile survey program commenced in April 1976 at Narrabeen located on Sydney’s Northern Beaches in southeast Australia is one of just a handful of sites worldwide where on-going and uninterrupted beach monitoring now spans multiple decades. With the Narrabeen survey program reaching its 40-year milestone in April 2016, it is timely that free and unrestricted use of these data be facilitated to support the next advances in beach erosion-recovery modelling. The archived dataset detailed here includes the monthly subaerial profiles, available bathymetry for each survey transect extending seawards to 20 m water depth, and time-series of ocean astronomical tide and inshore wave forcing at 10 m water depths, the latter corresponding to the location of individual survey transects. In addition, on-going access to the results of the continuing monthly survey program is described.
Design Type(s) | time series design • observation design |
Measurement Type(s) | beach morphology |
Technology Type(s) | topographic survey |
Factor Type(s) | |
Sample Characteristic(s) | Narrabeen • sandy beach |
Machine-accessible metadata file describing the reported data (ISA-Tab format)
Similar content being viewed by others
Background & Summary
Long-term datasets that record and quantify the variability, changes and trends in morphology observed at sandy beaches are rare. A monthly beach profile survey program that commenced in April 1976 at Narrabeen located on Sydney’s Northern Beaches in southeast Australia (Fig. 1) is one of a limited number of sites globally where on-going and uninterrupted beach monitoring now spans multiple decades and the use of these data has been reported in the published literature (Table 1; refs 1–16).
(a) Aerial photo (source: NSW Department of Lands) of the Narrabeen embayment—showing the locations of the five monthly survey transects (PF1, PF2, PF4, PF6, and PF8), depth contours at 2.5 m intervals, and the local alongshore coordinate system relative to the northern headland; (b) the beach with respect to the Sydney coastline and the location of the Sydney waverider buoy; (c) map of Australia (adapted from ref. 35).
In the 1970s and 1980s the growing database of beach surveys at Narrabeen was key to the pioneering work by Australian coastal geomorphologists that resulted in the formulation of the Morphodynamic Beach State Model17, which today remains the standard classification scheme used by coastal scientists worldwide to describe different natural sandy beach states, their characteristic morphodynamic process signatures and associated wave and sediment environmental controls17–27. During the 1990s related studies at Narrabeen included a focus on surfzone rip currents and the emergence of new insight to the associated hazards to beach swimmers28,29.
At the turn of the 21st Century the record of beach changes at Narrabeen had extended to sufficient length that longer-term cycles and underlying trends in beach behaviour began to be revealed30,31. This prompted significant new interest in the wider use of the Narrabeen survey dataset to further identify and explore potential linkages between regional-scale climatic forcing and sandy coastline response32–36. At the same time, recognition within the research community that regional-scale wave climates can be expected to change and sea levels in the coming decades will continue to rise37,38 helped strengthen the awareness of the fundamental importance of sustained coastline monitoring programs. In particular, the monthly observations from Narrabeen provided an all-too-rare data resource to calibrate and test new models aimed at developing better prediction tools of present and future variability and changes along sandy coastline worldwide39–47.
The monthly beach profile survey program at Narrabeen will reach its 40-year milestone in April 2016. It is therefore timely to facilitate, through publication of the dataset, the unrestricted use of this resource by as wide a cross-section of the coastal research community as possible. The complete archived dataset described and detailed here includes the monthly subaerial profiles, bathymetries and time-series of astronomical tide and offshore wave forcing transformed to the inshore location corresponding to each of the individual survey transects.
It is envisaged that open and easy access to these data may provide a new stimulus to coastal morphodynamic modellers worldwide to develop, test and (it is hoped) significantly advance the next generation of beach erosion-recovery hindcasting and forecasting tools. As a discipline, our ability to predict anticipated coastal changes in the context of a changing climate is presently in its relative infancy. In the meantime, as the current custodians of this valuable resource it is the authors’ intention that collection of monthly profile data at Narrabeen will continue for the foreseeable future, as our contribution to generations who follow. In addition to the complete and archived dataset that accompanies this publication, access details are also provided to a ‘live’ online Narrabeen monitoring program repository, where on-going monthly profile surveys will continue to be updated.
Methods
The full archived dataset comprises:
-
Monthly cross-shore subaerial profile surveys at the five locations where these have been continued from 1976 up to the present time;
-
Cross-shore bathymetry transects for each of the five survey profile lines extending to 20 m water depth;
-
Hourly local inshore significant wave height, peak wave period and mean wave direction (Hs,Tp, Dir) at 10 m water depth immediately seawards of each of the five survey transects, derived from the transformation of measured deepwater waves and gap-filled using a newly-available wave hindcast; and
-
Astronomical tide at a frequency of 15 min.
To coincide with this publication, and in addition to the accompanying archived dataset spanning 1976–2016 [Data Citation 1], unrestricted access is now also available to an online ‘live’ data repository located at http://narrabeen.wrl.unsw.edu.au containing additional information and resources, including: all the historical as well as newly acquired profile surveys updated each month, a range of survey data visualisation tools; the lookup table (MATLAB software code) used to transform deep to inshore waves specific to the location of each survey transect, and the contact details to external organisations (to which the authors have no affiliation) where additional wave and water-level information may be requested.
Site description
The coastline of southeastern Australia includes over 700 embayed sandy beaches averaging 1.3 km in length separated by rocky headlands48. The 3.6 km-long Narrabeen-Collaroy embayment (hereafter simply referred to as ‘Narrabeen’) is situated within the Northern Beaches region of metropolitan Sydney. Locally, the sandy beach that spans the entire embayment is referred to as Narrabeen beach towards the north and Collaroy beach in the south, with the small section of beach adjacent to the prominent headland at the extreme southern end called Fishermans beach (Fig. 1).
The beach sediments at Narrabeen were deposited as a regressive barrier in the mid-Holocene approximately 300 m landward of the present-day shoreline. The barrier subsequently prograded through a series of foredune ridges, with the most seaward ridge of the modern embayment dated at 3 ka. The granulometry is approximately uniform along the beach and characterized by fine to medium quartz sand (D50≅0.3 mm) with ~30% carbonate fragments. A lagoon now backs the northern half of the barrier and is connected to the ocean via a shallow narrow (~50 m-wide) inlet at the embayment’s northern extremity that intermittently opens and closes to the ocean49.
The adjacent headlands and curvature of the embayment result in a distinctive alongshore wave energy gradient. Dissipative-intermediate beach conditions typically prevail in the north, transitioning to lower energy and intermediate-reflective beach conditions towards the south. The northern end of Narrabeen is characterised by single-bar rhythmic bar-beach (RBB) to transverse bar-rip (TBR) intermediate beach states and a subaerial berm that varies up to 80 m in width, backed by a vegetated foredune up to 9 m in height above mean sea level (MSL). At the southern end of the embayment urban development has encroached on to much of the foredunes, which reach only 3 to 4 m in height, and the beach consists of a berm that varies up to 60 m in width and a single-bar system that tends towards the lower-energy low-tide terrace (LTT) and reflective beach states. Tides are microtidal and semidiurnal with a mean spring tidal range of 1.3 m.
The deepwater wave climate for the Sydney region is of moderate to high wave energy (mean Hs≅1.6 m and Tp≅10 s) and dominated by persistent long period swell waves from a SSE direction. These swell waves are generated from mid-latitude cyclones that propagate approximately 5–9 times per month across the southern Tasman Sea, south of mainland Australia50. Superimposed on these background swell waves are storm events that are typically defined for this region by a significant wave height threshold of 3 m, corresponding to the 0.95 quantile51. These storm waves are derived from a number of sources and directions: tropical cyclones from the northeast, east-coast lows from the east and intensified mid-latitude cyclones from the south. The wave climate exhibits a mild seasonal cycle, with high-energy mid-latitude cyclones and east-coast lows more prominent in the Austral winter months and low-energy short-period seas derived from local north-easterly sea-breezes more prominent in the Austral summer51. At inter-annual time scales, the wave climate is influenced by the El Niño/Southern Oscillation (ENSO), with La Niña periods typically having a more energetic and easterly wave climate and El Niño periods a less energetic and more southerly wave climate32,33,36. The distinct wave energy gradient in the local shallow-water wave climate at Narrabeen is to a large degree a result of the sheltering of southerly waves by the 1.5 km Long Reef Point headland that forms the embayment’s southern extremity. Numerical wave modeling33 indicates breaking wave height is approximately 30% higher at the northern end compared to the southern end for average wave conditions. This situation is reversed, however, for northeast waves, with breaking wave heights approximately 30% larger in the south relative to the north. An equivalent reversal in the wave angle of incidence is also observed, with southerly waves resulting in northerly-directed alongshore currents and northeast waves resulting in southerly-directed alongshore currents.
Monthly beach profile surveys and bathymetry transects
The beach monitoring program at Narrabeen can be divided into two distinct periods: the first three decades when a simple and traditional survey technique was employed; and from 2004 onwards when the monitoring program was significantly expanded, and the use of new and emerging survey technologies have been progressively implemented. A full history of the beach monitoring program at Narrabeen is detailed in refs 52,53. A time-line and summary of the various survey methods employed is presented below.
1976–2006: historical profile surveys
The years between 1976 and 2006 constitute the period of conventional profile line surveys undertaken by Professor Andrew Short and volunteers of the Coastal Studies Unit, University of Sydney employing the Emery method54. This simple, rapid and low-cost technique uses a measuring tape for cross-shore distance, and vertical elevation changes are calculated using line-of-sight between two graded rods and the horizon. Commencing with the landward rod on a fixed benchmark, the distance between the two rods is first measured using the measuring tape. The change in elevation between the two rods is then calculated by using the line-of-sight with the horizon and markings on the rods as a reference. This process is repeated at each subsequent measurement point along the entire length of the cross-shore profile line. A detailed validation of these historical survey data is provided in the ‘Technical Validation’ section.
The monitoring program during the 1970s based on this use of the Emery method initially comprised fortnightly cross-shore profile surveys at a total of fourteen profile lines along the embayment. Each profile line was surveyed at spring low tide from a fixed benchmark located in the stable dune area down to a swimming depth within (and sometimes beyond) the surf zone. This labour-intensive approach typically extended each surveyed profile to depths of 1–4 m below mean sea level, depending on the prevailing surf conditions. The cross-shore spacing of each measurement was 10 m.
Following the first few years of these fortnightly surveys at fourteen profile lines, a pragmatic decision was made to reduce and focus on-going effort to achieve monthly surveys at a lesser number of five representative profile lines. These five profiles that continue to the present day are numbered 1, 2, 4, 6 and 8 (north to south, hereafter identified as PF1, PF2, PF4, PF6 and PF8) and their locations are indicated in Fig. 1; their non-sequential numbering corresponds to the original numbering scheme when 14 profiles were surveyed. The seaward survey limit for each of these five representative profiles was also changed to the more easily achievable intersection with mean sea level (i.e., approximately wading depths). These early and pragmatic decisions to limit the number and cross-shore extent of each profile line are undoubtedly the key reasons why monthly surveys were subsequently achieved by the same personnel during the ensuing three decades.
2004-present: new survey technologies
Recognising the unique and growing value of the Narrabeen survey dataset worldwide, beginning in 2004 efforts were initiated by the UNSW Water Research Laboratory55 to secure, improve and expand the monitoring program into the future through the use of new survey technologies. This commenced in July 2004, with the decision to transition the historical profile line surveys from the Emery method to the use of high-accuracy RTK-GPS technology (vertical accuracy≈±0.03 cm). Following a 16-month validation period during which surveys were undertaken concurrently using the Emery method and RTK-GPS (refer ‘Technical Validation’ section), the use of RTK-GPS as the standard survey method for the five profile lines was adopted in May 2005. The cross-shore resolution of each profile survey was also increased at this time from the original 10 m measurement spacing to near-continuous (i.e., approximately every 0.10 m cross-shore). At the same time as the use of RTK-GPS was implemented in early 2004, an Argus coastal imaging station56 was installed atop the 44 m high Flight Deck apartment building at South Narrabeen. Since this time, this station has continuously collected hourly daylight images of the southern sector of the beach from five separate cameras (the field of view encompassing PF6 and PF8). These images are available for public viewing and download (http://ci.wrl.unsw.edu.au). Since 2004 several additional survey techniques have been progressively implemented at Narrabeen (Table 2) to complement the on-going monthly profile surveys detailed here, with the objective to begin to build for the future an expanded dataset with which to gain greater understanding of beach morphodynamics at more detailed spatial and temporal resolutions. It is our goal that, as the necessary resources to undertake rigorous QA, data archiving, online storage and delivery become available, open access to these additional data will be facilitated via the ‘live’ data repository at: http://narrabeen.wrl.unsw.edu.au.
Cross-shore bathymetry transects to accompany the historical profile surveys have been obtained from 11 hydrographic surveys conducted by the NSW Office of Environment and Heritage (OEH) during the period 2011–2015. These hydrographic surveys have been undertaken using a variety of methods: a single-beam jetski-mounted system for shallow water depth soundings (8 jetski surveys in total); a single-beam boat-mounted system for shallow-intermediate water depth soundings (2 surveys); and a multi-beam boat-mounted system for intermediate water depth soundings at high resolution (1 survey).
Waves and astronomical tides
Hourly offshore wave measurements of the significant wave height Hs, peak wave period Tp and mean wave direction Dir have been recorded by the Sydney directional waverider buoy since March 1992, located 11 km offshore of Narrabeen (33° 47′S, 151° 25′E) in 80 m water depth (Fig. 1). In order to obtain a continuous directional wave time-series spanning as much as is currently possible of the full duration of the beach survey program, wave data prior to 1992 as well as gaps in the wave measurement record (typically a few days, in total 5%) have been filled by hourly hindcast waves. A high-resolution wave hindcast dataset (approx. 7 km grid spacing) developed by the Centre for Australian Weather and Climate Research (CAWCR)57 that currently spans the period 1979–2014 at the closest grid point to Sydney (33° 48′S, 151° 24′E) was used for this purpose. The resulting continuous (hourly) offshore wave time-series from January 1979 to October 2014 was then transformed to 10 m water depths at the location of each of the five cross-shore profile lines using the nearshore wave model SWAN58. The SWAN model transformation (refer below for technical validation) was undertaken by means of a lookup table based on 1573 model run combinations of offshore Hs, Tp and Dir. Physical processes activated in the SWAN model include triad wave-wave interactions, wave growth, white-capping, depth-induced wave breaking and bottom friction (adopting default parameters for each process). A JONSWAP wave spectrum was assumed with a peak enhancement factor of 3.3 (default). These discrete wave combinations used for SWAN model runs span the range of offshore wave conditions along this coastline, from significant wave heights between 0.25 and 9.5 m, wave periods between 2 and 17 s and wave directions between 0° and 245° TN. Since wave period is unchanged in shallow water, peak wave periods at the 10 m water depth locations are assumed equal to offshore values (i.e., no wave period transformation is undertaken).
Astronomical Tides over the same time period as the combined wave data (i.e., January 1979–October 2014) have been derived at 15 min intervals using the tidal analysis package T_Tide59 based on available water-level data (1987–2012) at the nearby HMAS Penguin tide gauge (33° 49′31.66″S, 151° 15′30.71″E). This subset of measured water-level data was obtained from an external organisation (contact details provided in online ‘live’ data repository http://narrabeen.wrl.unsw.edu.au). Absolute tidal anomalies due to short-term atmospheric and oceanographic fluctuations for this 25 year time period are found to be limited to 0.19 m for 95% of the time and 0.26 m for 99% of the time. A comprehensive analysis and discussion of historical and recent sea-level trends and variability in this region are detailed in ref. 60.
Code availability
The lookup table used to transform the combined deepwater directional wave data to the 10 m water depth corresponding to the inshore location of each of the five individual profile survey transects is available at http://narrabeen.wrl.unsw.edu.au. This is implemented as a single and fully commented MATLAB function.
The T_Tide software code used to generate the Astronomical Tide time-series for Sydney that is provided with this dataset is freely available at: https://www.eoas.ubc.ca/~rich/#T_Tide. Output statistics from this T_Tide analysis for Sydney, including all significant tidal amplitudes, is also available at http://narrabeen.wrl.unsw.edu.au.
Data Records
The full archived dataset can be obtained at [Data Citation 1]. Access to these same data plus additional background information, online visualisation tools and the profile surveys as they continue to be updated on a monthly basis are also provided at http://narrabeen.wrl.unsw.edu.au.
Table 3 documents the data format and metadata for the complete monthly beach profile dataset April 1976–February 2016. Figure 2 shows graphically the mean profile and envelope of profile change that has been recorded at each survey profile PF1, PF2, PF4, PF6 and PF8. Also shown in this figure is the time-series of beach width 1976–2016 recorded at the 0 m AHD (Australian Height Datum) contour elevation, corresponding to (approximately) mean sea level.
The five profiles lines are provided in a single comma-delimited text file ‘Narrabeen_Profiles.csv’. Note that survey measurements prior to May 2005 (survey method ‘EMERY’ in column 5) were undertaken at a fixed cross-shore spacing of 10 m (no interpolation), while surveys undertaken after this time (survey method ‘GPS’) have been interpolated to a standard 1 m cross-shore spacing. Intermittent survey measurements in the stable dune areas of each profile have been carried through to the following survey date and are identified by the flag ‘DUNEFILL’ in column 5.
Table 4 documents the specific data format and metadata for the bathymetry transects extending seawards from approximately −2 to −20 m AHD, corresponding to the location of each of the five beach profile lines. These data are provided in a single comma-delimited text file ‘Narrabeen_Bathymetry.csv’. Bathymetry transect data (Fig. 3) were obtained from 11 intermittent hydrographic surveys conducted between 2011 and 2015. The data is provided at a fixed 1 m cross-shore spacing referenced to the same origin as the profile line surveys. Any rock (i.e., non-erosive) reefs located along the bathymetry transects (most notably in profiles PF1 and PF8) are identified in column 5 by ‘REEF’, whereas sandy bed types are labelled ‘SAND’. Single-beam jetski-mounted measurements are denoted in column 6 by the flag ‘SBEAMJETSKI’, single-beam boat mounted surveys by ‘SBEAMBOAT’ and multi-beam boat-mounted surveys by ‘MBEAMBOAT’.
Table 5 documents the formats and metadata for the hourly time-series of inshore significant wave height (Hs), peak wave period (Tp) and mean wave direction (Dir) at 10 m water depth directly seaward of each of the five beach profile lines. The comma-delimited text file is called ‘Inshore_Waves.csv’. The wave roses shown in Fig. 4 summarise the long-term features of the deepwater and inshore wave climate for this same period, showing the dominance of persistent long period swell waves from a SSE direction. Note that these wave time-series start approximately 3.5 years after the commencement of the beach survey program and presently end in October 2014. At the time of writing no source of deepwater wave information (source identified in column 5 as ‘MEAS’—measured, ‘HIND’—hindcast, or ‘INTERP’—linear gap-interpolations) outside of this ~35 year time-window was available.
Table 6 documents the comma-delimited ‘Astronomical_Tide.csv’ text file, format and metadata for the hourly time-series of astronomical tide spanning the identical period of the inshore wave time-series.
Technical Validation
Emery method survey validation
Validation of the Emery method surveys was assessed over a 16-month period (May 2005–August 2006) when all five profile lines were measured concurrently by both the Emery method and high-accuracy RTK-GPS. Comparing the complete profiles derived from the two survey methods (80 profiles in total), vertical deviations were found to be approximately normally distributed with a mean of −0.03 m and a standard deviation of 0.13 m. In the intertidal zone (between 0 and +2 m AHD), this translates to a cross-shore standard deviation of 1.1 m. Considering the magnitude of cross-shore variability at this site (standard deviation of width at the 0 m AHD contour=11–14 m), this represents a signal-to-noise ratio (SNR) in the order of 10:1. A full summary of the Emery method validation and SNR analyses at various time scales for the Narrabeen beach profile data set is detailed in ref. 52.
CAWCR wave hindcast data validation
The CAWCR wave hindcast dataset has been validated at both a global level (using global satellite altimeter data) and regional level (using Northern Hemisphere and South Pacific wave buoys), as documented by ref. 57. In order to assess the applicability of this wave hindcast data for the Sydney region, wave hindcast data at the nearest grid point was compared to hourly measured data from the Sydney waverider buoy (1992–2014, n=1,65,388). Statistics used for the validation include the Pearson correlation coefficient R, mean bias (mean bias=hindcast—measured data) and the root-mean-square-error (RMSE). These statistics are summarised in Table 7 for all three wave parameters (Hs, Tp and Dir) at both offshore and inshore locations.
This validation indicates a strong agreement between hindcast and measured offshore data for Hs (R=0.90, bias=−0.03 m, RMSE=0.43 m) that decreases in accuracy for Dir (R=0.70, bias=−8.4°, RMSE=30.1°) and Tp (R=0.51, bias=−0.62 s, RMSE=2.3 s). Such results are consistent with those observed both at a global level and with the Northern Hemisphere/South Pacific buoys described by ref. 57. The decrease in accuracy related to the peak wave period can in part be explained by the discontinuity of the measured peak wave period data, which can vary substantially under mixed sea/swell regimes and when there is bimodality in the wave spectra. When transforming both measured and hindcast data to the five inshore locations, a dampening of the wave direction bias (e.g., from −8.4° offshore to −1.5° at PF8) as well as the overall RMSE is observed. This dampening is related to an overall decrease in wave directional variability as waves are refracted and attenuated from deep to shallow water.
Nearshore wave transformation validation
To assess the validity of the SWAN nearshore wave transformation used to transform offshore (deepwater) wave data to inshore (intermediate-shallow) values, the same lookup table was applied and compared to hourly data from an inshore waverider buoy deployed within the Narrabeen embayment spanning a four-month period between July and November 2011. The location of this buoy (33°43′17″S, 151°18′15″E) was approximately halfway between PF4 and PF6, at the same 10 m water depth. As a means of evaluating the additional uncertainty that is introduced by using offshore wave hindcast as opposed to measured data for this purpose, both measured and hindcast offshore wave data were also independently transformed and compared to inshore measurements. A total of 2,431 measurements of inshore significant wave height and direction were used for the validation. Validation statistics were the same as those described above for the hindcast validation: correlation coefficient R, mean bias (mean bias=transformed—measured data) and RMSE. These statistics are summarized in Table 8.
In general, both the transformed measured and transformed hindcast data indicate good agreement with inshore measured values, with correlation coefficients of 0.94 and 0.91 for measured and hindcast Hs respectively; and corresponding 0.74 and 0.62 for Dir. Mean biases for both measured and hindcast deepwater waves transformed to the nearshore are likewise small and are in the order of −0.02 and −0.04 m respectively for Hs (i.e., a slight underestimation of inshore wave heights) and 4.4° and 2.9° respectively for Dir (i.e., a slightly more southerly estimation of the wave direction). The relatively minor reduction in accuracy for the wave hindcast data when transformed to inshore values justifies its use for the purpose of gap-filling and extending the wave dataset over the available historical record.
Additional information
How to cite this article: Turner, I. L. et al. A multi-decade dataset of monthly beach profile surveys and inshore wave forcing at Narrabeen, Australia. Sci. Data 3:160024 doi: 10.1038/sdata.2016.24 (2016).
References
References
Lippmann, T. C. & Holman, R. A. The spatial and temporal variability of sandbar morphology. Journal of Geophysical Research-Oceans 95, 11575–11590 (1990).
Larson, M. & Kraus, N. C. Temporal and spatial scales of beach profile change, Duck, North Carolina. Marine Geology 117, 75–94 (1994).
Birkemeier, W. A., Nicholls, R. J., Lee, G. Storms, storm groups and nearshore morphologic change. In: Coastal Sediments '99 (eds Kraus N. C. & McDougal W. ) 2, 1109–1122 (ASCE, 1999).
Lacey, E. & Peck, J. Long-term beach profile variations along the south shore of Rhode Island, USA . Journal of Coastal Research 14, 1255–1264 (1998).
Pianca, C., Holman, R. & Siegle, E. Shoreline variability from days to decades: Results of long‐term video imaging. Journal of Geophysical Research: Oceans 120, 2159–2178 (2015).
Wijnberg, K. M. & Terwindt, J. H. J. Extracting decadal morphological behaviour from high-resolution, long-term bathymetric surveys along the Holland coast using eigenfunction analysis. Marine Geology 126, 301–330 (1995).
Pape, L., Plant, N. G. & Ruessink, B. G. On cross‐shore migration and equilibrium states of nearshore sandbars. Journal of Geophysical Research: Earth Surface 115, F3 (2010).
Rattan, S. S., Ruessink, B. G. & Hsieh, W. W. Non-linear complex principal component analysis of nearshore bathymetry. Nonlinear Processes in Geophysics 12.5, 661–670 (2005).
Kroon, A. et al. Statistical analysis of coastal morphological data sets over seasonal to decadal time scales. Coastal Engineering 55, 581–600 (2008).
Quartel, S., Kroon, A. & Ruessink, B. G. Seasonal accretion and erosion patterns of a microtidal sandy beach. Marine Geology 250, 19–33 (2008).
Rozynski, G. Long-term shoreline response of a nontidal, barred coast. Coastal Engineering 52, 79–91 (2005).
Rozynski, G., Larson, M. & Pruszak, Z. Forced and self-organized shoreline response for a beach in the southern Baltic Sea determined through singular spectrum analysis. Coastal Engineering 43, 41–58 (2001).
Thom, B. & Hall, W. Behaviour of beach profiles during accretion and erosion dominated periods. Earth Surface Processes and Landforms 16, 113–127 (1991).
McLean, R. & Shen, J. S. From foreshore to foredune: Foredune development over the last 30 years at Moruya Beach, New South Wales, Australia. Journal of Coastal Research 22, 28–36 (2006).
Kuriyama, Y. Medium-term bar behavior and associated sediment transport at Hasaki, Japan. Journal of Geophysical Research-Oceans 107, 12 (2002).
Kuriyama, Y., Ito, Y. & Yanagishima, S. Medium-term variations of bar properties and their linkages with environmental factors at Hasaki, Japan. Marine Geology 248, 1–10 (2008).
Wright, L. D. & Short, A. D. Morphodynamic variability of surf zones and beaches: A synthesis. Marine Geology 56, 93–118 (1984).
Short, A. D. Three-dimensional beach stage model. Journal of Geology 87, 553–571 (1979).
Short, A. D. & Wright, L. D. Beach systems of the Sydney Region. Australian Geographer 15, 8–16 (1981).
Short, A. D. & Hesp, P. A. Wave, beach and dune interactions in southeastern Australia. Marine Geology 48, 259–284 (1982).
Wright, L. D., Short, A. D. Morphodynamics of beaches and surf zones in Australia. In Handbook of Coastal Processes and Erosion (ed. Komar P. D. ) 35–64 (CRC Press, 1983).
Short, A. D., Wright, L. D. Morphodynamics of high energy beaches—an Australian perspective. In Coastal Geomorphology in Australia (ed. Thom B. G. ) 43–68 (Academic Press, 1984).
Short, A. D. Beach and nearshore facies, south east Australia. Marine Geology 60, 261–282 (1984).
Short, A. D. Rip current type, spacing and persistence. Narrabeen beach, Australia. Marine Geology 65, 47–71 (1985).
Wright, L. D., Short, A. D. & Green, M. O. Short term changes in the morphodynamic states of beaches and surf zones: An empirical predictive model. Marine Geology 62, 339–364 (1985).
Short, A. D. A note on the control of beach type and change, with S.E. Australian examples. Journal of Coastal Research 3, 387–395 (1987).
Wright, L. D. et al. The morphodynamic effects of incident wave groupiness and tide range on an energetic beach. Marine Geology 74, 1–20 (1987).
Huntley, D. A. & Short, A. D. On the spacing between observed rip currents. Coastal Engineering 17, 211–225 (1992).
Short, A. D. & Hogan, C. L. Rips and beach hazards, their impact on public safety and implications for coastal management. Journal of Coastal Research SI12, 197–209 (1994).
Short, A. D., Trembanis, A. & Turner, I. L. Beach oscillation, rotation and the southern oscillation, Narrabeen Beach, Australia. Proceedings International Coastal Conference Engineering 2000, American Society of Civil Engineers, Sydney. 2439-2452 (2001).
Short, A. D. & Trembanis, A. Decadal scale patterns in beach oscillation and rotation Narrabeen Beach, Australia- time series, PCA and wavelet analysis. Journal of Coastal Research 20, 523–532 (2004).
Ranasinghe, R., McLoughlin, R., Short, A. D. & Symonds, G. The Southern Oscillation Index, wave climate and beach rotation. Marine Geology 204, 273–287 (2004).
Harley, M. D., Turner, I. L., Short, A. D. & Ranasinghe, R. A re-evaluation of coastal embayment rotation: the dominance of cross-shore versus alongshore processes, Collaroy-Narrabeen Beach, southeast Australia. Journal of Geophysical Research—Earth Surface Processes 116, F04033 (2011).
Short, A. D., Bracs, M. A. & Turner, I. L. Beach oscillation and rotation: local and regional response at three beaches in southeast Australia. Journal of Coastal Research SI66, 712–717 (2014).
Harley, M. G., Turner, I. L. & Short, A. D. New insights in to embayed beach rotation: the importance of wave exposure and cross-shore processes. Journal of Geophysical Research—Earth Surface Processes 120, 1470–1484 (2015).
Barnard, P. L. et al. Coastal vulnerability across the Pacific dominated by El Nino/Southern Oscillation. Nature—Geoscience 8, 801–807 (2015).
IPCC, 2007. Climate Change 2007: The Physical Science Basis. Contribution of Working Group I to the Fourth Assessment Report of the Intergovernmental Panel on Climate Change (eds Solomon S. et al.) 996 (Cambridge University Press, 2007).
IPCC, 2013. Climate Change 2013: The Physical Science Basis. Contribution of Working Group I to the Fifth Assessment Report of the Intergovernmental Panel on Climate Change (eds Stocker T. F. et al.) 1535 (Cambridge University Press, 2013).
Callaghan, D. P., Nielsen, P., Short, A. D. & Ranasinghe, R. Statistical simulation of wave climate and extreme beach erosion. Coastal Engineering 55, 375–390 (2008).
Callaghan, D. P., Ranasinghe, R. & Short, A. D. Quantifying the storm erosion hazard for coastal planning. Coastal Engineering 56, 90–93 (2009).
Davidson, M. A., Lewis, R. P. & Turner, I. L. Forecasting seasonal to multi-year shoreline change. Coastal Engineering 57, 620–629 (2010).
Davidson, M. A., Turner, I. L. & Guza, R. T. The effect of temporal wave averaging on the performance of an empirical shoreline evolution model. Coastal Engineering 58, 802–805 (2011).
Davidson, M. A., Splinter, K. D. & Turner, I. L. A simple equilibrium model for predicting shoreline change. Coastal Engineering 73, 191–202 (2013).
Splinter, K. D., Turner, I. L. & Davidson, M. A. Monitoring data requirements for shoreline prediction: How much, how long, and how often? Journal of Coastal Research SI65, 2179–2184 (2013).
Splinter, K. D., Turner, I. L. & Davidson, M. How much data is enough? The importance of morphological sampling interval and duration for calibration of empirical shoreline models. Coastal Engineering 77, 14–27 (2013).
Splinter, K. D., Turner, I. L., Davidson, M. A., Barnard, P., Castelle, B. & Oltman-Shay, J. A generalized equilibrium moDel for predicting daily to inter-annual shoreline response. Journal of Geophysical Research—Earth Surface Processes 119, 1936–1958 (2014).
Karunarathna, H., Ranasinghe, R. & Reeve, D. E. A hybrid beach morphology model applied to a high energy sandy beach. Ocean Dynamics 65, 1411–1422 (2015).
Short, A. D. Beaches of the New South Wales Coast. 2nd ed. (Sydney University Press, 2007).
Morris, B. D. & Turner, I. L. Morphodynamics of intermittently open-closed coastal lagoon entrances: New insights and a conceptual model. Marine Geology 271, 55–66 (2010).
Short, A. D. & Trenaman, N. L. Wave climate of the Sydney region, an energetic and highly variable ocean wave regime. Australian Journal of Marine and Freshwater Research 43, 765–791 (1992).
Harley, M. D., Turner, I. L., Short, A. D. & Ranasinghe, R. Interannual variability and controls of the Sydney wave climate. International Journal of Climatology 30, 1322–1335 (2010).
Harley, M. D., Turner, I. L., Short, A. D. & Ranasinghe, R. Assessment and integration of conventional, RTKGPS and image-derived beach survey methods for daily to decadal coastal monitoring. Coastal Engineering 58, 194–205 (2011).
Harley, M. D. et al. Four decades of coastal monitoring at Narrabeen-Collaroy Beach: the past, present and future of this unique dataset, Australasian Coasts & Ports Conference 2015, 15–18 September, Auckland, New Zealand (2015).
Emery, K. O. A simple method of measuring beach profiles. Limnology and Oceanography 6, 90–93 (1961).
Water Research Laboratory, School of Civil an Environmental Engineering, UNSW Australia http://www.wrl.unsw.edu.au.
Holman, R. A. & Stanley, J. The history and technical capabilities of Argus. Coastal Engineering 54, 477–491 (2007).
Durrant, T., Greenslade, D., Hemer, M. & Trenham, C. A global wave hindcast focussed on the Central and South Pacific, CAWCR Technical Report No. 70 www.cawcr.gov.au/technical-reports/CTR_070.pdf.
Booij, N., Ris, R. C. & Holthuijsen, L. H. A third-generation wave model for coastal regions 1. Model description and validation. Journal of Geophysical Research 104, 7649–7666 (1999).
Pawlowicz, R., Beardsley, B. & Lentz, S. Classical tidal harmonic analysis including error estimates in MATLAB using T_TIDE. Computers & Geosciences 28, 929–937 (2002).
White, N. J. et al. Australian sea levels—trends, regional variability and influencing factors. Earth-Science Reviews 136, 155–174 (2014).
Data Citations
Turner, I. L. Dryad http://dx.doi.org/10.5061/dryad.28g01 (2015)
Acknowledgements
Since 2004 the continuing beach monitoring program has been funded by the Australian Research Council (Discovery and Linkage), Warringah Council, NSW Office of Environment and Heritage (OEH), SIMS foundation and the UNSW Faculty of Engineering. OEH provided the representative bathymetry data included here. The Sydney waverider buoy data used for offshore to inshore wave transformation is funded by OEH and managed by Manly Hydraulics Laboratory (http://www.mhl.nsw.gov.au). The SWAN lookup table to complete this transformation was initially created by Mr Ed Kearney. CSIRO (especially Dr Mark Hemer) is acknowledged for undertaking and providing the CAWCR wave hindcast dataset. Brad Morris of OEH provided the Sydney tide measurements for T_Tide analysis. Brett Miller at UNSW provided guidance on the creation of the ‘live’ DataWarehouse data repository. And finally, the authors with to thank all those individuals who have joined us on the beach to assist with the monthly surveys during the past 4 decades.
Author information
Authors and Affiliations
Contributions
I.L.T. conceived of the public release and publication of the Narrabeen beach profile survey dataset and lead the writing of the manuscript; since 2004 has led the continuation, expansion and funding of the monitoring program. M.D.H. undertook the preparation of data files, figures and data validation; contributed to the writing of the manuscript and undertook the original analyses that enabled the integration of the historical with modern beach profile survey technologies; currently responsible for the day-to-day management of the monitoring program. A.D.S. commenced the Narrabeen beach monitoring program in 1976, and for the period 1976 to 2004 was entirely responsible for profile data collection and management; continuing mentor to the monitoring program team past and present; contributed to the writing of the manuscript. J.A.S. undertook the programming that underpins the ‘live’ DataWarehouse repository, currently shares the responsibility of continuing the monthly profile surveys and contributed to the writing of the manuscript. M.A.B. undertook and managed the monthly survey program from 2010 to 2013, and contributed to the writing of the manuscript. K.D.S. has assisted with the management and continuation of the monthly survey program since 2011, and contributed to the writing of the manuscript. M.S.P. currently shares the responsibility of continuing the monthly profile surveys and contributed to the writing of the manuscript.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing financial interests.
ISA-Tab metadata
Rights and permissions
This work is licensed under a Creative Commons Attribution 4.0 International License. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in the credit line; if the material is not included under the Creative Commons license, users will need to obtain permission from the license holder to reproduce the material. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0 Metadata associated with this Data Descriptor is available at http://www.nature.com/sdata/ and is released under the CC0 waiver to maximize reuse.
About this article
Cite this article
Turner, I., Harley, M., Short, A. et al. A multi-decade dataset of monthly beach profile surveys and inshore wave forcing at Narrabeen, Australia. Sci Data 3, 160024 (2016). https://doi.org/10.1038/sdata.2016.24
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/sdata.2016.24
- Springer Nature Limited
This article is cited by
-
Coastal survey data for Perranporth Beach and Start Bay in southwest England (2006–2021)
Scientific Data (2023)
-
Ten years of morphodynamic data at a micro-tidal urban beach: Cala Millor (Western Mediterranean Sea)
Scientific Data (2023)
-
Assessing coastline recession for adaptation planning: sea level rise versus storm erosion
Scientific Reports (2023)
-
Influence of El Niño on the variability of global shoreline position
Nature Communications (2023)
-
Pacific shoreline erosion and accretion patterns controlled by El Niño/Southern Oscillation
Nature Geoscience (2023)