Abstract
Organic semiconductors (OSC) are widely used for consumer electronic products owing to their attractive properties such as flexibility and low production cost. Atomically thin transition metal dichalcogenides (TMDs) are another class of emerging materials with superior electronic and optical properties. Integrating them into van der Waals (vdW) heterostructures provides an opportunity to harness the advantages of both material systems. However, building such heterojunctions by conventional physical vapor deposition (PVD) of OSCs is challenging, since the growth is disrupted due to limited diffusion of the molecules on the TMD surface. Here we report wafer-scale (3-inch) fabrication of transferable OSC nanosheets with thickness down to 15 nm, which enable the realization of heterojunction devices. By controlled dissolution of a poly(acrylic acid) film, on which the OSC films were grown by PVD, they can be released and transferred onto arbitrary substrates. OSC crystal quality and optical anisotropy are preserved during the transfer process. By transferring OSC nanosheets (p-type) onto prefabricated electrodes and TMD monolayers (n-type), we fabricate and characterize various electronic devices including unipolar, ambipolar and antiambipolar field-effect transistors. Such vdW p-n heterojunction devices open up a wide range of possible applications ranging from ultrafast photodetectors to conformal electronics.
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Introduction
Heterojunctions based on organic semiconductors (OSCs) and monolayer transition metal dichalcogenides (ML TMDs), exploiting the advantages of both material systems, attract interest in the engineering of electronic, photonic and optoelectronic devices1,2,3. OSC exhibit excellent electronic properties which can outperform or act complementary to inorganic semiconductors4,5,6. OSC based electronic and optoelectronic devices such as organic light-emitting diodes (OLED)7 are already used as constituents of several consumer products widely, especially in displays of television sets and mobile phones. ML TMDs are known for their superior electronic transport properties and have been identified as promising candidates for ultrathin device technologies8,9. The combination of OSCs and high-performance ML TMDs provides novel opportunities for complementary metal–oxide–semiconductor (CMOS) technology10,11. However, integration of OSCs and TMDs into the heterojunction devices via physical vapor deposition (PVD) of OSCs onto the TMD surfaces is challenging, since the low diffusion and ordering of the organic molecules limits functional properties of the formed OSC films12,13. Here we report a methodology for fabrication of highly crystalline ultrathin (down to 15 nm) OSC nanosheets with lateral dimensions up to 3-inch and their transfer onto arbitrary substrates. We employ this methodology for the assembly of van der Waals (vdW) heterostructures with two-dimensional (2D) materials. As an example for 2D materials, we chose ML TMDs. In brief, water-soluble polyacrylic acid (PAA) thin films on silicon wafers were used as growth substrates to form highly crystalline OSC films of pentacene or dinaphtho[2,3-b:2’,3’-f]thieno[3,2-b]thiophene (DNTT) via PVD. We show that these films can be controllably released as mechanically stable nanosheets from the growth substrate by the dissolution of the water-soluble PAA substrate and transferred onto arbitrary substrates. We apply various characterization techniques such as atomic force microscopy (AFM), X-ray diffraction and confocal microscopy to demonstrate the high crystallinity and therewith optical anisotropy of the OSC nanosheets before and after transfer. We use the OSC nanosheets to fabricate field-effect transistors (FETs) and to study their performance. To this end, the nanosheets were transferred onto prefabricated electrodes to realize wafer-scale bottom-contact FET arrays and their properties were compared with OSC films directly grown on the wafer by PVD. Besides that, the p-type OSC nanosheets were transferred onto prefabricated n-type MoS2 device structures to realize high-performance ambipolar and antiambipolar FETs.
Results and discussion
Release and transfer of organic nanosheets
First, we describe the transfer method. We spin coat a water-soluble PAA thin film on an oxygen plasma-treated 3-inch Si wafer. The PAA layer acts as the growth substrate for PVD of highly ordered pentacene or DNTT films with thicknesses ranging from 15 to 50 nm. We found out that a controlled release of the OSC films is possible by a water-assisted transfer technique, see Fig. 1. We place a Si wafer with the OSC film next to the water droplet, see Fig. 1a and Supplementary Fig. 1, and establish a contact between the wafer and the droplet, see Fig. 1b. The surface tension difference between the untreated glass plate and the plasma-treated Si wafer drives the water towards the Si14; the water intrudes between the substrate and the OSC film, which results in its release from the substrate and formation of a free-standing OSC nanosheet. Due to the hydrophobic nature of the OSC15, the released nanosheet floats on the water meniscus. Although the rest of the OSC film is still sticking to the Si wafer at one side, it remains intact without rupture or cracking. A photograph of an intermediate state of the release of a 50 nm thick pentacene film from a 3-inch Si wafer is shown in Fig. 1g. Finally, by adding more water, the PAA dissolves completely and the whole mechanically stable OSC nanosheet floats on the water surface, Fig. 1c. A photograph of such a 50 nm thick pentacene nanosheet is shown in Fig. 1h. After the organic film is released from the PAA template, the transfer of the OSC onto the target substrate resembles other meniscus-based transfer schemes for all-organic heterojunctions, which instead require soluble molecules16,17,18. Further details on the PAA dissolution and a time-lapse video of the process are provided in Supplementary Notes1 and in Supplementary Video 1. Next, the glass support with the floating OSC nanosheet on the wafer is immersed into a water bath (Fig. 1d) and the floating OSC nanosheet is taken by the target substrate, Fig. 1e. Note that transfer of the nanosheet is particularly favorable on hydrophilic target substrates. However, the transfer onto hydrophobic target substrates such as Si wafers after cleanroom processing is also possible. To this end, the edge of the target Si wafer needs to establish a physical contact with the floating OSC nanosheet to enable vdW adhesion as shown schematically in Fig. 1e. Once the adhesion is established, the target wafer with the OSC nanosheet is taken out of the water and dried in air. We found out that positioning the wafer almost vertically allows excess water to drain out easily and dry faster, Fig. 1f. A 50 nm pentacene nanosheet transferred in this way on a 2-inch wafer is shown in Fig. 1i.
a A Si wafer with an OSC film on a PAA interlayer is placed on a glass plate next to a water droplet, the water contact angle is ca. 50°. b After the Si wafer contacted the droplet, PAA starts to dissolve and the OSC film is partially released. c After some time, the OSC film is detached and floats on the water layer as a mechanically stable nanosheet. d The Si wafer with the floating nanosheet on the glass plate is immersed into a beaker filled with water. e The floating OSC nanosheet is moved to the target substrate. f The target substrate with OSC is removed from the beaker, and placed almost vertically inclined for drying. The OSC nanosheet adheres homogeneously to the substrate. g Photograph of the PAA dissolution step as illustrated in (b). A partially detached pentacene nanosheet (thickness of 50 nm and diameter of 3-inch) can be seen floating on the water meniscus. In the right side of the wafer, it can be seen that nanosheet is still attached to the wafer. The floating part of the nanosheet appears hazy. h The pentacene nanosheet floating on water after complete dissolution of PAA. The pentacene nanosheet indicated as red-dashed circle. i Photograph of the target wafer with transferred pentacene nanosheet.
Structural and optical characterization of transferred organic nanosheets
Morphology and crystallinity of the OSC nanosheets were characterized before and after transfer by AFM and X-ray diffraction. For 50 nm pentacene and DNTT nanosheets, PAA promotes the formation of large crystalline grains with lateral grain size dimensions of ~6 µm and ~3 µm, respectively (see Fig. 2a, d). These grains are much larger than those obtained by the direct growth on oxide surfaces such as SiO2 and Al2O3, or on TMDs, see Supplementary Fig. 3 for a comparison. After transfer, the grain morphology of the OSC nanosheets is preserved as verified by AFM, see Fig. 2b, e and Supplementary Fig. 4. X-ray diffraction further confirms that PAA promotes OSC nanosheet growth in a single crystallographic phase, i.e., before transfer, there is only one series of Bragg peaks for both materials (see black curves in Fig. 2c, f). The Bragg reflections of pentacene change after transfer (see red curve in Fig. 2c). Pentacene is known to exhibit different polymorphs such as thin film and Campbell bulk phase which can be converted in response to stress19. Apparently, the transfer induces a stress sufficient to convert some fraction of the thin-film phase into Campbell bulk phase20. Such stress might originate from the curvature of the water meniscus during the release of the OSC nanosheet. Stress-induced phase transitions have not been reported for DNTT. In agreement, the crystallographic phase of the DNTT nanosheet is preserved after transfer.
AFM micrographs of pentacene nanosheet (a) before and (b) after transfer. (c) X-ray diffraction measurements of pentacene nanosheet before and after transfer, black curve and red curve, respectively. AFM micrographs of DNTT nanosheet (d) before and (e) after transfer. f X-ray diffraction measurements of DNTT nanosheet before and after transfer, black and red curve, respectively. g Optical reflection maps of the transferred pentacene nanosheet recorded by mapping an area of approx. 25 µm x 25 µm with a polarized laser scanning confocal microscope at 635 nm. The yellow arrow indicates the polarization as vertical in (g), and as horizontal polarization in (h). i False color superimposed image combining (g) and (h).
It is well-known that the optical reflection of pentacene grains is strongly polarization dependent for some specific wavelengths, a phenomenon called Davydov splitting21. In order to probe for Davydov splitting, we raster scan the transferred pentacene nanosheet in confocal geometry with a linear polarized laser beam (635 nm) (see Supplementary Notes4). Indeed, we found out that the reflection of individual grains depends on the polarization direction of the laser, which is indicated by the yellow arrow in Fig. 2g, h. Each grain reflects only one of the two polarization states efficiently, as verified by a false-colour superposition map in Fig. 2i. This observation confirms that the transferred pentacene nanosheets preserves their specific optical properties.
Transport characteristics of transferred organic nanosheets
Next, the electronic transport properties of transferred OSC nanosheets were investigated in the inverted coplanar field-effect geometry, i.e., bottom-contact and bottom-gate FETs, as shown in Fig. 3a (see also Supplementary Fig. 5). A highly doped Si substrate is used as a global bottom-gate electrode and an ALD grown 33 nm alumina (Al2O3) film serves as the gate dielectric. A self-assembled monolayer (SAM) of n-tetradecylphosphonic acid was used to passivate the alumina film6. Bottom-contacts were defined by shadow masks, which we use to evaporate a structured Ti adhesion layer and Au contacts. Finally, a 50 nm DNTT nanosheet is transferred on the wafer. The device characterization is shown in Fig. 3b. The DNTT device exhibits an on/off ratio of up to 105 at VD = −5.0 V, a threshold voltage of −0.63 V, and a little hysteresis of 217 mV (see Supplementary Fig. 6 for further transistor characteristics). The extracted mobility for DNTT is 0.16 cm2 V−1s−1 and the subthreshold swing is 289 mV per decade. A further improvement of the extracted OSC mobility might be possible by bottom-contact modification22. These values show that the OSC/gate dielectric junction is structurally and energetically well-ordered after the nanosheet transfer, i.e. we see only mild signatures of the charge traps that typically lower device performance in OSC bottom-contact devices. In addition, transferred nanosheet FETs with top-contacts show similar transfer characteristics as bottom-contact devices suggesting that the well-known Au bottom-contact problems were resolved by transfer (Supplementary Fig. 7).
a Schematic of OSC nanosheet FET device. The Si device substrate has a 33 nm alumina gate dielectric layer modified with a n-tetradecylphosphonic acid SAM and Au/Ti source-drain electrodes. The heavily doped Si base functions as a gate electrode. A 50 nm thick DNTT nanosheet is transferred on to the device substrate which functions as the FET channel. For comparison another device is fabricated by direct PVD of a 50 nm thick DNTT layer onto a similar device structure. b Drain current (ID) as a function of gate voltage (VG) of transferred DNTT nanosheet and evaporated DNTT film, shown as black and red curves, respectively. Filled and hollow circles correspond to logarithmic and square root axis, respectively. The drain bias voltage is VD = −5.0 V. See Supplementary Notes5 for details. Blue lines indicate the linear behavior in square root plot.
Next, we compare the device with a transferred nanosheet with a similar device fabricated via direct PVD of the DNTT. This device yields drain currents, which are more than one order of magnitude lower in comparison to the nanosheet device. The difference in performance can be further quantified by square root plots of the drain current; here the devices should exhibit an extended linear characteristic curve according to Shockley theory23. Indeed, the transferred device shows a linear region allowing for the extraction of the mobility, while the PVD device shows pronounced nonideal super-linear behavior, i.e., increasing slope with increasing gate voltage, which prevents the mobility extraction24. Eye inspection of Fig. 3b reveals that the extrapolation of the threshold voltage (blue dashed line) is only valid for the four highest data points, which is an indication of super-linear behavior24. For the transferred device, the extrapolation is valid for a much larger voltage region, shown as the blue line in Fig. 3b as well, an indication of close to ideal behavior24. A well-known cause for pronounced nonideal behavior in bottom-contact devices is the structural disorder of the OSC/Au junction due to the inferior growth behavior of organic molecules on Au surfaces25. Our results show that such growth problems are prevented in the FET devices made of the transferred OSC nanosheets.
Transport characteristics of van der Waals heterostructures
Now, we demonstrate the vdW heterostructure devices made of OSC nanosheets and ML MoS2. We assemble vdW p-n heterojunction by transfer of the OSC nanosheets onto ML MoS2 nanosheets. We tested two different device configurations resulting in ambipolar and antiambipolar FETs, see Fig. 4a, c. To this end, high-quality ML MoS2 single crystals26 were synthesized on thermally oxidized Si wafers by chemical vapor deposition (CVD) (see Supplementary Notes6). The MoS2 crystals were transferred by a PMMA assisted transfer process27 and Au/Ti source/drain electrodes were patterned. Next, a 50 nm DNTT nanosheet was transferred (see Supplementary Fig. 9a). Figure 4b shows the transfer curves of such a device under ambient conditions demonstrating the characteristic drain current V-shape of ambipolar FETs, see also Supplementary Figure 10. The current in the ambipolar region can be expressed as the sum of an electron and hole current28:
a Schematic of the ambipolar FET device. As illustrated, the Au/Ti contacts are placed between the ML MoS2 and the 50 nm thick DNTT nanosheet. Here the channel width and length are 10 µm. b Drain current as a function of gate voltage of the ambipolar FET device for two different drain voltages (5.0 V and −5.0 V). Filled and hollow circles refer to logarithmic and square root axis, respectively. c Schematic diagram of antiambipolar FET device. The source and drain electrode are individually contacted to the ML MoS2 and pentacene nanosheet, respectively. The pentacene/ML MoS2 heterojunction is 15 µm along the channel. d Drain current of the antiambipolar device as function of gate voltage for two different drain voltages (5.0 V and 10.0 V).
The drain voltage VD affects the threshold voltage of one of the two currents, (cf. Eq. 1), here the hole current, and in turn the transfer curve shifts in response to the drain voltage, cf. Fig. 4b. Furthermore, the two asymptotic branches of the drain current allow us to model the saturation behavior of the ambipolar device to determine electron and hole mobilities µe, µh and threshold voltages Vth,e, Vth,h. The DNTT/MoS2 vdW heterojunction device shows rather balanced mobilities of µh = 0.18 cm2V−1s−1 and µe = 0.25 cm2 V−1s−1. So far, similar balanced mobilities have only been reported for organic single crystals placed on 2D materials10. Such balanced mobilities are important in applications where the device operates in bipolar or ambipolar mode, as needed for, e.g., inverters and oscillators29. We performed drain bias dependent ambipolar FET measurements to resolve the nature of the conducting channel. We find that both channels (p and n) can be switched off in the ambipolar FET geometry via the gate, a typical behavior for a semiconductor (Supplementary Fig. 10a, b).
The drain current dip in the transfer curve provides additional information about the subthreshold behavior of the device. According to Eq. 1, the ambipolar current drops to zero for drain voltages smaller than the electron and hole threshold voltage difference. Here, we measure a finite current of ID = 100 pA for VD = ±5.0 V in the minimum. This current can be explained by subthreshold behavior of ML MoS2 and DNTT; i.e., we can model current in the minimum with a ML MoS2 subthreshold swing of 2.31 V per decade, see Supplementary Notes7 for further analysis. The subthreshold swing allows to estimate the density of ML MoS2 subthreshold traps to Nt,sub = 9.16 × 1012 eV−1cm−2 assuming a capacitance per area of Ci = 38.4 nF per cm2. Similar values are found for DNTT.
The geometric design of the ambipolar device allows that current flows in the two junction materials without crossing the two materials. In order to enforce current flow across the heterojunction, we employ now the antiambipolar geometry, Fig. 4c. In this geometry, the electrodes are exclusively in contact with one material only. Here, the source is connected to a ML MoS2 and drain to a 50 nm pentacene nanosheet. The overlap region of the two materials, i.e., the p-n junction, is 15 µm along the channel length. Technically, this configuration was realized with help of an insulating SU-8 polymer coating on one contact, and suited placement of the second contact (see Fig. 4c and Supplementary Fig. 9b, 11). In this antiambipolar geometry, the drain current minimum of the ambipolar geometry changes to a drain current maximum. This peak in drain current is the fingerprint of the antiambipolar geometry, confirming that indeed a functional p-n heterostructure junction formed between a 2D material and a transferred OSC. The signal to noise ratio of the drain current maximum is up to 103, cf. Fig. 4d, exceeding previously reported values for this materials combination12.
In summary, we have developed a method for wafer-scale (3-inch) synthesis and transfer of organic semiconducting nanosheets with thickness down to 15 nm, demonstrated for the example of DNTT and pentacene. The nanosheets can be transferred onto arbitrary substrates by a water-assisted transfer protocol. Unipolar devices fabricated via OSC transfer outperform prepared conventionally by PVD DNTT bottom-contact FETs by more than one order of magnitude in drain current. Fabrication of ambipolar and antiambipolar devices with OSC and ML MoS2 was demonstrated and such devices reach the performance of heterojunction devices previously build from organic single crystals, outperforming also OSC films deposited by PVD directly on MoS2. Such vdW heterojunction devices have potential application in optoelectronics as ultrafast photodetectors or light-emitting devices. Further progress in this direction relies on the improvement of the subthreshold behavior. The OSC transfer method can be used to transfer OSC nanosheets to flexible or curved substrates for applications in large area photodetection (see Supplementary Fig. 14), biomedical sensing applications30, and mechanical sensing as in artificial skin devices31.
Methods
Organic semiconductor deposition
Si wafer with SiO2 oxide surface were sonicated 5 min + 10 min in acetone and in isopropanol then 10 min DI at 60 °C. The SiO2 surface was activated by an O2 (10 sccm) plasma treatment at 50 W for 5 min. An approx. 50 nm thick layer of PAA (volume fraction 2.5%, filtered by 0.22 µm pore-sized syringe filter) was spin-coated (60 s at 4000 rpm) onto the Si wafer. The wafers were immediately loaded into an ultra-high vacuum (UHV) chamber and up to 50 nm thick pentacene or DNTT films were evaporated at a base pressure of middle 10−8 mbar. The OSC films were evaporated with a rate of 0.1 Å per s at room temperature for pentacene and with a rate of 0.1 Å per s at 60 °C for DNTT.
AFM and X-ray measurements
AFM images are recorded by a Bruker Dimensional Icon. The deposition rates and substrate temperatures for the nanosheets used in AFM measurements are 0.02 Å per s at room temperature and 0.1 Å per s at 60 °C for pentacene and DNTT respectively. For X-ray measurements an in house X-ray setup was used with Mo source and a monochromatic beam in reflection geometry. The deposition rates and substrate temperatures for the nanosheets used in X-ray measurements are 0.1 Å per s at room temperature for both pentacene and DNTT films, respectively.
Device fabrication
The shadow polyimide mask for patterning organic FETs was manufactured by CADiLAC Laser GmbH. For vdW heterostructure FETs, SiO2 is used as gate dielectric and its thickness is 90 nm for ambipolar DNTT/ML MoS2 FET and 300 nm for antiambipolar pentacene/ML MoS2 FET. The ambipolar FET was patterned by photolithography while the antiambipolar FET was patterned by e-beam lithography. OSC nanosheets for FETs were evaporated with 0.1 Å per s at room temperature for pentacene and 60 °C for DNTT films.
Electrical characterization
A probe station in dark ambient conditions was used for organic FETs and DNTT/ML MoS2 ambipolar FET where pentacene/ML MoS2 antiambipolar FET was measured under vacuum.
Data availability
The data that support the findings of this study are available from the corresponding author upon reasonable request.
References
Jariwala, D., Marks, T. J. & Hersam, M. C. Mixed-dimensional van der Waals heterostructures. Nat. Mater. 16, 170–181 (2017).
Gobbi, M., Orgiu, E. & Samorì, P. When 2D materials meet molecules: opportunities and challenges of hybrid organic/inorganic van der Waals heterostructures. Adv. Mater. 30, 1706103 (2018).
Sun, J. et al. 2D–Organic hybrid heterostructures for optoelectronic applications. Adv. Mater. 31, 1803831 (2019).
Horowitz, G. Organic field‐effect transistors. Adv. Mater. 10, 365–377 (1998).
Yamamoto, T. & Takimiya, K. Facile synthesis of highly π-extendedheteroarenes, dinaphtho [2, 3-b: 2’, 3’-f] chalcogenopheno [3, 2-b] chalcogenophenes, and theirapplication to field-effect transistors. J. Am. Chem. Soc. 129, 2224–2225 (2007).
Klauk, H., Zschieschang, U., Pflaum, J. & Halik, M. Ultralow-power organic complementary circuits. Nature 445, 745–748 (2007).
Leung, L. M. et al. A high-efficiency blue emitter for small molecule-based organic light-emitting diode. J. Am. Chem. Soc. 122, 5640–5641 (2000).
Radisavljevic, B. et al. Single-layer MoS2 transistors. Nat. Nanotechnol. 6, 147–150 (2011).
Larentis, S., Fallahazad, B. & Tutuc, E. Field-effect transistors and intrinsic mobility in ultra-thin MoSe2 layers. Appl. Phys. Lett. 101, 223104 (2012).
He, X. et al. MoS2/Rubrene van der Waals heterostructure: toward ambipolar field‐effect transistors and inverter circuits. Small 13, 1602558 (2017).
Wang, Z., Huang, L. & Chi, L. Organic semiconductor field-effect transistors based on organic-2D heterostructures. Front. Mat. 7, 295 (2020).
Jariwala, D. et al. Hybrid, gate-tunable, van der Waals p–n heterojunctions from pentacene and MoS2. Nano Lett. 16, 497–503 (2016).
Kim, J.-K. et al. Trap-mediated electronic transport properties of gate-tunable pentacene/MoS2 p-n heterojunction diodes. Sci. Rep. 6, 36775 (2016).
Eid, K., Panth, M. & Sommers, A. The physics of water droplets on surfaces: exploring the effects of roughness and surface chemistry. Eur. J. Phys. 39, 025804 (2018).
Di, C.-a. et al. Effect of dielectric layers on device stability of pentacene-based field-effect transistors. Phys. Chem. Chem. Phys. 11, 7268–7273 (2009).
Li, H. et al. Organic Heterojunctions Formed by Interfacing Two Single Crystals from a Mixed Solution. J. Am. Chem. Soc. 141, 10007–10015 (2019).
Shi, Y. et al. Bottom-up growth of n-type monolayer molecular crystals on polymeric substrate for optoelectronic device applications. Nat. Commun. 9, 1–8 (2018).
Xiao, M. et al. Sub-5 nm single crystalline organic p–n heterojunctions. Nat. Commun. 12, 1–7 (2021).
Murakami, Y. et al. Microstructural study of the polymorphic transformation in pentacene thin films. Phys. Rev. Lett. 103, 146102 (2009).
Westermeier, C. et al. Sub-micron phase coexistence in small-molecule organic thin films revealed by infrared nano-imaging. Nat. Commun. 5, 1–6 (2014).
Cocchi, C., Breuer, T., Witte, G. & Draxl, C. Polarized absorbance and Davydov splitting in bulk and thin-film pentacene polymorphs. Phys. Chem. Chem. Phys. 20, 29724–29736 (2018).
Borchert, J. W. et al. Small contact resistance and high-frequency operation of flexible low-voltage inverted coplanar organic transistors. Nat. Commun. 10, 1–11 (2019).
Sze, S. M., Li, Y. & Ng, K. K. Physics of Semiconductor Devices (John Wiley & Sons, 2021).
Choi, H. H. et al. Critical assessment of charge mobility extraction in FETs. Nat. Mater. 17, 2–7 (2018).
Bock, C. et al. Improved morphology and charge carrier injection in pentacene field-effect transistors with thiol-treated electrodes. J. Appl. Phys. 100, 114517 (2006).
Shree, S. et al. High optical quality of MoS2 monolayers grown by chemical vapor deposition. 2D Mater. 7, 015011 (2019).
George, A. et al. Controlled growth of transition metal dichalcogenide monolayers using Knudsen-type effusion cells for the precursors. J. Phys. Mater. 2, 016001 (2019).
Zaumseil, J. & Sirringhaus, H. Electron and ambipolar transport in organic field-effect transistors. Chem. Rev. 107, 1296–1323 (2007).
Zschieschang, U. et al. Roadmap to gigahertz organic transistors. Adv. Funct. Mater. 30, 1903812 (2020).
Werkmeister, F. & Nickel, B. Towards flexible organic thin film transistors (OTFTs) for biosensing. J. Mater. Chem. B 1, 3830–3835 (2013).
Ramuz, M., Tee, B. C. K., Tok, J. B. H. & Bao, Z. Transparent, optical, pressure‐sensitive artificial skin for large‐area stretchable electronics. Adv. Mater. 24, 3223–3227 (2012).
Acknowledgements
B.N. and S.B.K. acknowledge Philipp Altpeter (LMU) for cleanroom support, Domenikos Chryssikos (TUM) for the SAM modification recipe, Joachim Rädler (LMU) for comments on wetting physics and Michel de Jong (UT) for ALD grown alumina wafer. All authors acknowledge financial support by EU within FLAG-ERA JTC 2017 managed Deutsche Forschungsgemeinschaft (DFG) under contract nr. NI 632/6-1 and TU 149/9-1. B.N. acknowledges support from the Bavarian State Ministry of Science, Research and Arts through the grant “Solar Technologies go Hybrid (SolTech)”.
Funding
Open Access funding enabled and organized by Projekt DEAL.
Author information
Authors and Affiliations
Contributions
The research project was initiated by B.N. and A.T. S.B.K., A.G., A.T., and B.N. developed the OSC transfer technique. S.B.K. pursued the growth and transfer of organic nanosheets including their characterization with help from F.A. E.N., Z.G. and A.G. carried out the preparation of TMDs. S.B.K. and U.H. fabricated OSC/TMD devices. S.B.K. characterized the unipolar and ambipolar FETs while E.N. and A.G. measured the antiambipolar FET. S.B.K. and B.N. analyzed the FET characteristics and wrote the manuscript. All authors contributed to the final form of the manuscript.
Corresponding authors
Ethics declarations
Competing interests
An institutional patent application titled “Method of transfer of organic semiconductor films to a substrate and electronic devices made therefrom” with the German Patent and Trade Mark Office (GPTO) was filed by FSU Jena with the official file number “10 2021 107 057.0.” Inventors (share equal part, in alphabetic order): Antony George, Sirri Batuhan Kalkan, Bert Nickel, Andrey Turchanin.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Kalkan, S.B., Najafidehaghani, E., Gan, Z. et al. Wafer scale synthesis of organic semiconductor nanosheets for van der Waals heterojunction devices. npj 2D Mater Appl 5, 92 (2021). https://doi.org/10.1038/s41699-021-00270-9
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41699-021-00270-9
- Springer Nature Limited