Abstract
Information technology demands high-speed optoelectronic devices, but going beyond the one terahertz (THz) barrier is challenging due to the difficulties associated with generating, detecting, and processing high-frequency signals. Here, we show that femtosecond-laser-driven phonons can be utilized to coherently manipulate the excitonic properties of semiconductors at THz frequencies. The precise control of the pump and subsequent time-delayed broadband probe pulses enables the simultaneous generation and detection processes of both periodic lattice vibrations and their couplings with electronic states. Combining ultralow frequency Raman spectroscopy with first-principles calculations, we identify the unique phonon mode-selective and probe-energy dependent features of electron–phonon interactions in layered PdSe2. Two distinctive types of coherent phonon excitations could couple preferentially to different types of electronic excitations: the intralayer (4.3 THz) mode to carriers and the interlayer (0.35 THz) mode to excitons. This work provides new insights to understand the excited-state phonon interactions of 2D materials and to achieve future applications of optoelectronic devices operating at THz frequencies.
Similar content being viewed by others
Introduction
Fascinating quantum phenomena in atomically thin 2D materials have attracted tremendous attention from fundamental research to industry owing to their various applications in multiple areas1. One of the most interesting features is the reduced screening that leads to enhanced Coulomb interactions compared with their 3D counterparts2. For example, tightly bound electron–hole pairs, known as excitons, can form in 2D semiconductors with binding energies of hundreds of millielectronvolts (about an order of magnitude larger than those of typical 3D semiconductors)3. Phonons are another quasiparticle in condensed matter systems, and their interaction with other phonons, electrons, or photons is of fundamental significance to understand physical properties ranging from mobility to superconductivity. The electron–phonon interaction is typically studied at the electronic ground state using Raman spectroscopy4, whereas excited-state phonon dynamics remains less understood. It is therefore critical to develop a deeper understanding of how different phonon modes interact with other quasiparticle excitations such as excitons.
Optical driving has emerged as a powerful method to generate novel out-of-equilibrium transient phases of quantum matter that are not available at equilibrium. A particularly useful tool to gain knowledge of nature’s speediest processes is ultrafast pump–probe experiments, in which the non-equilibrium states are triggered by light pulses, and the temporal evolution is subsequently monitored by appropriately-delayed probe pulses. A variety of light-driven excited states have been explored in 2D layered materials, including carrier relaxation dynamics5,6,7, superconductivity8, the anomalous Hall effect9, charge density waves10, chiral phonons11, and spin-valley dynamics12,13,14. In the phonon sector, the impulsive force provided by light pulses can initiate coherent phonon oscillations, in which individual phonon modes are selectively excited and lead to atomic motions that keep pace with their neighbors. For example, vibrational wavepackets for the radial breathing mode and the G mode have been observed in carbon nanotubes15 and 47.4 THz coherent phonons of in-plane carbon stretching mode have been reported in graphite16. In layered quasi-2D materials, these periodic vibrations can induce relative atomic displacements and strains that are associated with either interlayer (shear or breathing)17,18 or intralayer19,20 modes. In the electronic sector, the photoexcited free carriers can modify the screening properties of the material, providing an opportunity to shift the conduction band (CB) and valence band (VB) relative to each other21,22,23,24,25. This provides an avenue for manipulating the bandgap of the material in an all-optical way without any chemical modification.
Bringing the electronic and phonon sectors together also provides opportunities for applications. Future information technologies call for new devices that can operate at frequencies above 1 THz or one trillion cycles per second. These high frequencies are particularly useful: they can carry more information (both classical and quantum) than lower frequency signals and can open up new options for applications such as actuators, radars, ultrafast data recording, processing, and communications systems. However, the high-frequency performance of switches or modulators is still a challenge, with a theoretical limitation of the modulation speed to the gigahertz (GHz) regime26,27. With the assistance of the strain induced by coherent phonons, one can expect to go beyond the traditional limit and manipulate the transient physical properties (e.g., optical, electronic, and topological properties) that are sensitive to lattice symmetry at frequencies comparable to the terahertz atomic motions. For instance, ultrashort light pulses have been employed to achieve an ultrafast topological switch based on the shear phonon oscillations of few-layer WTe2 at a frequency of 0.24 THz28. Despite these promising developments, the direct demonstration of terahertz-frequency modulation of the electronic bandgap is still missing in current material systems with a limited probe energy range.
To address this challenge, we report on an ultrafast modulator of the electronic bandgap of few-layer palladium diselenide operating at terahertz frequencies, taking advantage of electronic (bandgap renormalization), and phonon (field-driven oscillations) effects simultaneously. Combining broadband pump–probe experiments and first-principles calculations, we reveal the dominant roles of screening in the bandgap renormalization as well as interactions with two types of coherent phonons that preferentially couple to electrons and excitons and operate at 4.3 and 0.35 THz, respectively. Overall, the simultaneous interplay of carriers, excitons, and phonons provides a comprehensive view of the non-equilibrium quasiparticle dynamics and many-body interactions in atomically thin 2D materials.
Results and discussions
Growth and characterizations of large-area PdSe2
As a transition-metal dichalcogenide (TMD), palladium diselenide (PdSe2) has emerged as a new type of layered material with distinctive physical properties such as remarkable stability in the air, high carrier mobility, a negative Poisson’s ratio, and pressure-induced superconductivity29,30,31. In addition, PdSe2 is expected to possess abnormally strong interlayer coupling beyond the typical van-der-Waals forces found in layered materials, because of its d2sp3 hybridization between the pz band of Se and the d band of Pd is stronger than in other TMDs with d4sp hybridization32. Therefore, PdSe2 offers an excellent platform to explore light-driven non-equilibrium many-body interactions that can be harnessed for application in functional devices. In this work, a wafer-scale PdSe2 sample is first synthesized on a quartz substrate using the chemical vapor deposition (CVD) technique with high-purity PdCl2 and Se under vacuum conditions (from SixCarbon Technology, Shenzhen). The top and side view of the crystal structure of PdSe2 is shown in Fig. 1a, exhibiting a puckered pentagonal pattern with an orthorhombic lattice. The high quality of the sample is confirmed by detailed characterizations. The nanoscale surface topographic image is shown in Fig. 1b and the height profile of the sample is shown in Fig. 1c with a measured average thickness of ~2.9 nm. The height corresponds to eight layers with an interlayer distance of ~0.39 nm. According to the AFM images, the height is very uniform over the whole sample, implying uniformity of thickness and further confirming the sample quality. The chemical and stoichiometric characteristics are probed by X-ray photoelectron spectroscopy (XPS). Figure 1d, e shows the high-resolution XPS spectrum of Se 3d and Pd 3d regions, respectively. The two characteristic peaks at 54.75 and 55.65 eV in Fig. 1d are attributed to the 2d5/2 and 2d3/2 doublets of Se2− and the peaks located at 342 and 336.75 eV in Fig. 1e are originated from the 3d3/2 and 3d5/2 orbitals of Pd4+. The atomic ratio of Pd and Se atoms can be quantitatively estimated to be near stoichiometric. Figure 1f shows the calculated electronic structure of PdSe2 with an indirect bandgap of 1.1 eV using many-body perturbation theory. Figure 1g presents the ground-state absorption spectra of the PdSe2 sample measured by UV–Vis–NIR Spectrophotometer (Agilent Cary 5000). The indirect bandgap is estimated to be 1.1 eV through a linear extrapolation Tauc plot (Supplementary Note 1), in good agreement with the calculated value. The spectrum features a pronounced A-exciton transition resonance near 2.23 eV, corresponding to the strong optical transition between the parallel bands in Fig. 1f. The calculated exciton peak at 2.31 eV is in reasonable agreement with the measurement.
The ultrafast interplay between electronic and lattice excitations
The temporal and spectral evolution of different electronic transitions in PdSe2 is recorded in real-time at room temperature by measuring the differential transmission contrast signal ΔT/T using ultrafast transient absorption spectroscopy (see Experimental section for details). The sample is excited by 35-fs pulses centered at a photon energy of 3.4 eV and with a pump fluence set to 160 μJ/cm−2. Figure 2a shows the 2D mapping of the ΔT/T signal as the function of pump–probe delay and probe photon energy. Figure 2b shows the ΔT/T spectra near A exciton resonance for the first 10 ps. Interestingly, the variation of the optical response appears immediately after photoexcitation, and subsequently, the sample exhibits a distinct response at different time delays. Pronounced photobleaching (PB) signal is observed when probing near the A excitonic transition resonance, which can be attributed to population-induced phase-space filling effects arising from Pauli blocking. The absorption can be obtained from the transmission spectrum with the thin-film approximation and the exciton resonance energy is extracted from the absorption spectrum through Lorentz fitting (Supplementary Note 2). Figure 2c shows the exciton energy shift (ΔE) as a function of pump-probe time delay. With increasing time, the exciton resonance energy experiences a dramatic energy shift with a blueshift and redshift crossover as well as pronounced oscillatory components. The large magnitude of this laser-induced energy shift, compared to those in conventional semiconducting quantum well systems or 2D materials22,33,34,35,36,37, is a signature of strong many-body interactions in few-layer PdSe2. Initially, the exciton energy shifts to higher energies, which may be due to the Pauli blocking of the exciton band edge via the Burstein–Moss effect with high carrier density and the dynamic screening of excitons induced by the free carriers. Afterward, a pronounced energy redshift occurs at about 1.5 ps. The microscopic mechanism behind the energy shift results from the competition between the quasiparticle bandgap (Eg) shrinkage and the exciton binding energy (Eb) reduction in the presence of strong carrier screening. Optical excitation above the A exciton resonance generates an abundance of free-charge carriers at the very beginning that precedes A exciton formation. At such high excitation densities, photoexcited carriers strongly screen Coulomb interactions. The carrier-induced screening leads to a bandgap renormalization by reducing both Eg and Eb23: the screening of the repulsive Coulomb interaction between electrons reduces Eg, whereas the screening of the attractive Coulomb interaction between electron-hole pairs reduces Eb. Such competition leads to the transition from blueshift to redshift. Our results indicate that the presence of strong screening due to excess photoexcited carriers play a crucial role in the renormalization of the quasiparticle bandgap. As shown in Fig. 2d, under strong screening conditions, Eg decreases much faster than Eb, and as a consequence the exciton resonance energy Eopt = Eg − Eb redshifts, which is consistent with the energy redshift at later times. Such screening effects can be partially captured by hybrid functionals based on a screened Coulomb potential38 (Supplementary Note 3).
Along with the pump-induced exciton resonance shift, we observe an ultrafast periodic modulation of optical properties in PdSe2 on two different timescales. A plot of the temporal evolution of the transmission contrast ΔT/T over a broad range of probe photon energies exhibits the two regimes. The first regime is over femtosecond timescales, as demonstrated in Fig. 3a, b, showing that the optical response has a strong modulation of the differential transmission ΔT/T signal initiated by the ultrashort laser. As shown in Fig. 3c, the oscillatory part can be fitted to a damped sinusoidal model [ΔT/T(t, λ) = Be−γtcos(ωt + ϕ), in which B is the initial amplitude, γ is the decay constant, ϕ is the phase angle (at t = 0), and ω is the angular frequency] with a repetition rate of 4.3 THz and a lifetime of 1.4 ps when probed at 1.71 eV. In addition to ΔT/T, the oscillatory component of the time-dependent ultrafast energy shift ΔE is extracted and fitted with the damped sinusoidal model, as shown in Fig. 3d. The observed modulation frequency of ΔE is also about 4.3 THz, corresponding to 4.3 trillion cycles per second.
Analogous to the time-domain visualization of the coherent vibrations on the femtosecond timescale, a second regime emerges on longer timescales, also exhibiting an exceptionally strong periodic modulation of the differential contrast signal ΔT/T (Fig. 4a, b). The modulation feature weakens as the probe photon energies are tuned from 2.14 to 1.71 eV. At 1.20 eV, the increased modulation intensity arises from the intraband absorption correlated to both free carriers and excitons. The oscillatory components of the time-resolved ΔT/T can be extracted and fitted after subtracting the bi-exponentially fitted population dynamics, as demonstrated in Fig. 4c. The vibrational coherence profiles are accurately fitted using an exponentially damped sinusoidal model and the period is found to be 2.86 ps, corresponding to coherent phonon oscillations at a frequency of 0.35 THz, much slower than the oscillatory frequency of 4.3 THz. All the kinetic curves of the full-time range can be accurately fitted to a bi-exponential relaxation model and the best-fit τ1 and τ2 as a function of probe photon energy are demonstrated in Fig. 4d. The fast component τ1 can be due to extrinsic non-radiative energy channels such as Auger-type processes and the cooling of hot carriers to the lattice, and it is slightly dependent on the probe energy as different probe frequencies would interrogate the carrier dynamics when fulfills the resonance condition. The slow relaxation time τ2 can be attributed to the exciton lifetime and phonon scattering39. As shown in Supplementary Fig. 4, the frequency of the oscillations can be further confirmed from the Fourier transform of the oscillatory component probed at 1.71 eV, showing two strong peaks with modulation frequency at 4.3 and 0.35 THz.
Phonon dynamics revealed by low-frequency Raman spectroscopy
Having established the importance of two distinct coherent oscillations at THz frequencies, we next proceed to examine their microscopic features. Recent advances in realizing ultra-narrow optical filters have enabled the measurement of ultralow frequency (typically < 60 cm−1) Raman modes, offering a highly sensitive probe of interlayer vibrations and couplings in two-dimensional layered materials4,40,41. The Raman spectra are obtained in both low-frequency and high-frequency regimes simultaneously with excitation energy of 2.33 eV, close to the A exciton, as shown in Fig. 5a. The Stokes/anti-Stokes Raman spectra under parallel (HH) and cross (HV) polarization configurations are also shown in Fig. 5b. In the high-frequency regime, due to the C2v symmetry of eight-layer PdSe2, only the A1 and A2 modes are observed under the backscattering configuration, and they can be attributed to the intralayer vibrations of PdSe2. Thus, the observed high-frequency modes, \(A_1^{{{\mathrm{i}}}}\) (\(i = 0,1,2, \ldots ,5\)) peaks depicted in Fig. 5a, can be assigned to the A1 modes based on their polarized behaviors. The \(A_1^{{{\mathrm{i}}}}\) (\({{{\mathrm{i}}}} = 1,2, \ldots ,5\)) peaks correspond to the \(P{{{\mathrm{i}}}}\;({{{\mathrm{i}}}} = 1,2, \ldots ,5)\) peaks highlighted of exfoliated PdSe2, which can be attributed to the intralayer vibrations of PdSe2. The intralayer vibration at 144.6 cm−1 (4.3 THz) originating from the intralayer Se–Se bonds shows the strongest Raman intensity, implying its strong coupling to the electronic states. Besides, the interlayer layer-breathing (LB) and shear (S) modes in the ultra low-frequency regime can also be distinguished, which correspond to vibrations perpendicular and parallel to the basal plane, respectively. According to the density functional theory (DFT) calculations and modified linear chain model32, the interlayer modes at 12.5, 35.4, 48.1, and 51.6 cm−1 can be assigned to LB8,7, LB8,5, LB8,3, and LB8,1, respectively, as shown in Fig. 5a, further confirming the layer number of 8 and also the high quality of CVD-grown wafer-scale PdSe2. Distinct from many other 2D materials, the intensity of the interlayer LB modes in PdSe2 is unusually high and is comparable to that of the high-frequency intralayer vibrational modes, especially the peak at 12.5 cm−1 (0.35 THz), indicating strong coupling between the excitons and the LB modes in pentagonal PdSe2.
Coincident with the Raman results at 144.6 cm−1, we assign the periodic signal at 4.3 THz as the signature of coherent phonons with intralayer atomic vibrations within an individual PdSe2 layer. A possible explanation is that the intralayer atomic deformations can dynamically alter the interatomic electron cloud over femtosecond time scales, and therefore give rise to a transiently modified permittivity, making it detectable as a frequency modulated differential transmission contrast with our high time-resolvability spectroscopy. Benefited with the broadband probe, the phonon coupling with different excitonic transitions, at both temporal and spectral domains, can be compared simultaneously. Without any coupling, the oscillatory amplitude and coherence lifetime would be zero. Under a broadband probe with a fixed excitation strength, different types of collective oscillations of atoms are initiated and then become decoherent at the same level, but they have different responses at different transitions. For transitions with stronger coupling with phonons, more pronounced oscillatory amplitudes and longer-lasting coherence lifetimes are expected. As shown in Fig. 3b, the 4.3 THz intensity modulation ΔT/T related to excited-state absorption and carrier absorption (1.2–1.8 eV) is more pronounced than that near the vicinity of the exciton resonance. With the intralayer coherent atomic motions coupling preferentially to carriers, they influence the strength of carrier-induced screening and considerably alter the electronic bandgap at an extremely high frequency of 4.3 THz, as discussed earlier in Fig. 3d. The observed coherent phonon oscillations at 0.35 THz can be assigned to the low-frequency LB8,7 mode originating from the out-of-plane interlayer vibrations and such strong coupling is in good agreement with the large Raman intensity of LB8,7 peak. This can be attributed to the modified permittivity based on the coherent modification of the electronic structure. As shown in Fig. 4b, the 0.35 THz oscillation couples most strongly near the exciton resonance, while the coupling is much weaker in the regime of excited-state absorption. In contrast to the absence of coherent signals in the PB band of black phosphorus17, the strong coherent phonon oscillation of PdSe2 at 0.35 THz preferentially coupled with excitons at the PB band, indicating the exceptional strong exciton–phonon coupling in PdSe2.
Electron–phonon coupling from first-principles
To confirm our picture of phonon dynamics in PdSe2, we perform phonon and electron–phonon coupling calculations using the finite-difference method42. Figure 6a demonstrates the calculated phonon dispersion of eight-layer PdSe2, showing this configuration to be dynamically stable. The phonon occupation number Nph is obtained from the Bose–Einstein distribution function at 300 K. The calculated displacement patterns in Fig. 6b confirm that the higher frequencies around 4.3 THz (144.6 cm−1) are dominated by intralayer vibrations of Se atoms, while the low-frequency modes below 1 THz (33.3 cm−1) are dominated by interlayer vibrations of both Pd and Se atoms. In the low-frequency regime, the calculated phonon frequencies are lower than the measured ones, because the generalized gradient approximation to the exchange-correlation functional tends to underestimate the interatomic bonding. Therefore, the calculated LB8,7 frequency of 0.30 THz is accordingly lower than the measured frequency of 0.35 THz. The strength of electron-phonon coupling is estimated using a frozen-phonon approach along the normal modes with frequencies around 4.3 and 0.35 THz at the Γ point. It is found that there are two modes with much stronger coupling strength than their neighboring modes (Supplementary Fig. 5). As shown in Fig. 6d, the high-frequency intralayer mode at 4.30 THz significantly modulates the high-lying CBs around 3 eV. This is because the high-lying CBs come from the intralayer orbitals along the Pd–Se bonds (Fig. 6c), and only strong intralayer displacements can influence their wave function. By contrast, the interlayer mode of 0.30 THz strongly couples with the highest VBs. These bands, consisting mainly of \(d_{z^2}\) orbitals of Pd and pz orbitals of Se, are the dominant hole states in the formation of the A exciton. The \(d_{z^2}\) orbitals of Pd and pz orbitals of Se, oriented along the out-of-plane direction, are extremely sensitive to the interlayer breathing mode, which strongly couples to their charge distribution (Fig. 6c). The calculated electron–phonon dynamics are consistent with the observed ultrafast periodic modulation of both ΔT/T and ΔE in our broadband pump–probe experiments, in which the high energy carriers are more sensitive to the intralayer mode, while the A exciton is more sensitive to the interlayer mode. It should be noted that an accurate estimation of the different coupling processes requires the detailed computation of both electron–phonon and exciton-phonon coupling strengths43, but here we use the frozen-phonon method of selected modes motivated by the experimental results (for the variation of exciton absorption under these two phonon modes, see Supplementary Fig. 7).
In conclusion, our findings provide a pathway for the future development of THz frequency optoelectronic devices based on layered PdSe2. Furthermore, the observed vibrational phenomena combined with theoretical calculations provide an intuitive picture for exciton–phonon and electron–phonon interactions in 2D layered materials, which is supported by the ultralow frequency Raman spectroscopy with frequencies down to 5 cm−1.
Methods
Sample preparation
High-quality PdSe2 samples are grown on quartz substrate directly by the CVD method using PdCl2 and Se powder as precursors. Selenium is evaporated at 250 °C, PdCl2 is in the middle of a three-zone tube furnace with an intermediate temperature of 500 °C, and quartz substrate is in the last high-temperature zone of 600 °C. The evaporated Se and PdCl2 are grown on a quartz substrate in a high-temperature zone dragged by 300 standard cubic centimeters per minute (sccm) Ar and 30 sccm H2. The furnace is kept at 600 °C for 20 min. Then, the temperature is cooled down to room temperature.
Femtosecond transient absorption spectroscopy
The broadband transient absorption spectroscopy utilized a Ti:sapphire ultrafast amplifier (Legend Elite-1K-HE Coherent, 800 nm, ~35 fs, ~4 mJ, and 1 kHz) and pump-probe transient absorption spectrometer (Helios, Ultrafast System). The generated laser pulses are split into two optical paths by a pellicle beam splitter. One weak portion of the laser beam is used to generate a white light continuum as the broadband probe after passing through a sapphire or CaF2 crystal. Both the supercontinuum crystal and photodetectors need to be switched for the visible and near-infrared band. The other strong pulse is used to pump a nonlinear optical parametric amplifier (Light Conversion TOPAS) to produce pump laser pulses with tunable photon energy. The resolution of the pump–probe time delay is ~20 fs, tuned by a delay line (Thorlabs). The pump–probe time delay is controlled by a highly accurate motorized optical delay line. The pump pulse is modulated at 500 Hz by a mechanical chopper to ensure that the signal with or without photoexcitation can be recorded alternately. In this work, the pump and probe polarizations are controlled by a 1/2 plate and are crossed at the sample. The polarization of the two pulses is aligned in such a way that the angle between them is a magic angle of 54.7° to avoid any potential artifacts due to rotation effects. All acquired data are corrected by the frequency-dependent chirp and background scattered light.
Electronic structures calculations
First-principles calculations are performed on the basis of DFT with the projector augmented wave method as implemented in the Vienna ab initio simulation package44. The Perdew–Burke–Ernzerhof parameterization of the generalized gradient approximation is adopted as the exchange-correlation functional45. To describe van der Waals interactions in eight-layer PdSe2, the Tkatchenko–Scheffler method is used, which provides better agreement with the measured lattice constants compared to other methods46. Kinetic cutoff energy of 500 eV with an energy threshold of 10−6 eV for the self-consistent cycle is employed. The Brillouin zone is sampled using the Monkhorst–Pack method with a k-point grid of size 5 × 5. The cell geometry and atomic positions are fully optimized using the conjugate gradient algorithm until the maximum force on each unconstrained atom is less than 0.01 eV/Å. We maintain an interlayer vacuum spacing larger than 16 Å to eliminate interactions between adjacent slabs. Spin–orbit coupling is found to have a negligible influence on the electronic structure. Many-body perturbation theory calculations are conducted to obtain the quasiparticle electronic structures, in which the electron-electron interactions are included in the self-energy47,48. The single-shot G0W0 method is applied on top of the HSE06 hybrid functional38. Careful convergence tests are performed using k-point grids of 6 × 6, 10 × 10, and 12 × 12. Consistent with previous work, a 6 × 6 k-point grid can produce a qualitatively good dielectric function comparable to that of the 14 × 14 grid49, and a 10 × 10 k-point grid is well-converged. In addition, the G0W0 dielectric functions calculated using 768 and 384 bands show no significant difference. Therefore, we use 384 bands with a 10 × 10 k-point grid in the calculations. Many body corrections are included in the band structure in Fig. 1f in the form of a scissor shift of 0.916 eV.
Lattice dynamics and electron–phonon coupling calculations
We obtain the harmonic interatomic force constants using the finite displacement method in a 2 × 2 supercell with the PHONOPY code50. The full phonon dispersion is shown in Supplementary Fig. 6. We estimate the strength of electron–phonon coupling by calculating the electronic structure along the normal mode uqν41:
where q and ν are reciprocal space phonon wavevector and branch respectively, Np is the number of primitive cells in the real space supercell, Rp is the position vector of unit cell p, mα is the nuclear mass of atom α, i runs over Cartesian coordinates, hpαi is the displacement coordinate, and wqν;iα is the corresponding eigenvector. We use an amplitude of uqν corresponding to the 1σ of the Gaussian describing the ground state phonon wave function, given by \(1/\sqrt {2\omega _{q\nu }}\), where ωqν is the phonon frequency. We average over negative and positive displacements to calculate the absolute energy change in the presence of the frozen phonons. The electron–phonon coupling strengths for different phonon modes at the Γ point are shown in Supplementary Fig. 5, which can be directly compared with time- and angular-resolved photoelectron spectroscopy51,52.
Data availability
The authors declare that all data supporting the findings of this study are available within the paper and its Supplementary Information files.
References
Zhou, J. D. et al. A library of atomically thin metal chalcogenides. Nature 556, 355–359 (2018).
Mak, K. F. & Shan, J. Photonics and optoelectronics of 2D semiconductor transition metal dichalcogenides. Nat. Photonics 10, 216–226 (2016).
Scholes, G. D. & Rumbles, G. Excitons in nanoscale systems. Nat. Mater. 5, 683–696 (2006).
Tan, P. H. et al. The shear mode of multilayer graphene. Nat. Mater. 11, 294–300 (2012).
Shan, H. et al. Direct observation of ultrafast plasmonic hot electron transfer in the strong coupling regime. Light 8, 9 (2019).
Wang, R. et al. Unveiling the stimulated robust carrier lifetime of surface-bound excitons and their photoresponse in InSe. Adv. Mater. Interfaces 6, 1900171 (2019).
Yuan, L. et al. Photocarrier generation from interlayer charge-transfer transitions in WS2-graphene heterostructures. Sci. Adv. 4, e1700324 (2018).
Mitrano, M. et al. Possible light-induced superconductivity in K3C60 at high temperature. Nature 530, 461–464 (2016).
McIver, J. W. et al. Light-induced anomalous Hall effect in graphene. Nat. Phys. 16, 38–41 (2020).
Zhu, C. et al. Light-tunable 1T-TaS2 charge-density-wave oscillators. ACS Nano 12, 11203–11210 (2018).
Zhu, H. et al. Observation of chiral phonons. Science 359, 579–582 (2018).
Cheng, L. et al. Far out-of-equilibrium spin populations trigger giant spin injection into atomically thin MoS2. Nat. Phys. 15, 347–351 (2019).
Sie, E. J. et al. Large, valley-exclusive Bloch-Siegert shift in monolayer WS2. Science 355, 1066–1069 (2017).
Chen, X., Yan, T. F., Zhu, B. R., Yang, S. Y. & Cui, X. D. Optical control of spin polarization in monolayer transition metal dichalcogenides. ACS Nano 11, 1581–1587 (2017).
Gambetta, A. et al. Real-time observation of nonlinear coherent phonon dynamics in single-walled carbon nanotubes. Nat. Phys. 2, 515–520 (2006).
Ishioka, K. et al. Ultrafast electron-phonon decoupling in graphite. Phys. Rev. B 77, 121402 (2008).
Boschetto, D. et al. Real-time observation of interlayer vibrations in bilayer and few-layer graphene. Nano Lett. 13, 4620–4623 (2013).
Miao, X., Zhang, G., Wang, F., Yan, H. & Ji, M. Layer-dependent ultrafast carrier and coherent phonon dynamics in black phosphorus. Nano Lett. 18, 3053–3059 (2018).
Trovatello, C. et al. Strongly coupled coherent phonons in single-layer MoS2. ACS Nano 14, 5700–5710 (2020).
Jeong, T. Y. et al. Coherent lattice vibrations in mono- and few-layer WSe2. ACS Nano 10, 5560–5566 (2016).
Liu, F., Ziffer, M. E., Hansen, K. R., Wang, J. & Zhu, X. Direct determination of band-gap renormalization in the photoexcited monolayer MoS2. Phys. Rev. Lett. 122, 246803 (2019).
Chernikov, A., Ruppert, C., Hill, H. M., Rigosi, A. F. & Heinz, T. F. Population inversion and giant bandgap renormalization in atomically thin WS2 layers. Nat. Photonics 9, 466–470 (2015).
Pogna, E. A. A. et al. Photo-induced bandgap renormalization governs the ultrafast response of single-layer MoS2. ACS Nano 10, 1182–1188 (2016).
Gatti, G. et al. Light-induced renormalization of the dirac quasiparticles in the nodal-line semimetal ZrSiSe. Phys. Rev. Lett. 125, 076401 (2020).
Mor, S. et al. Ultrafast electronic band gap control in an excitonic insulator. Phys. Rev. Lett. 119, 086401 (2017).
Samizadeh Nikoo, M. et al. Nanoplasma-enabled picosecond switches for ultrafast electronics. Nature 579, 534–539 (2020).
Ma, Z. T., Geng, Z. X., Fan, Z. Y., Liu, J. & Chen, H. D. Modulators for terahertz communication: the current state of the art. Research 2019, 6482975 (2019).
Sie, E. J. et al. An ultrafast symmetry switch in a Weyl semimetal. Nature 565, 61–66 (2019).
Oyedele, A. D. et al. PdSe2: pentagonal two-dimensional layers with high air stability for electronics. J. Am. Chem. Soc. 139, 14090–14097 (2017).
ElGhazali, M. A. et al. Pressure-induced superconductivity up to 13.1 K in the pyrite phase of palladium diselenide PdSe2. Phys. Rev. B 96, 060509 (2017).
Liu, G., Zeng, Q., Zhu, P., Quhe, R. & Lu, P. Negative Poisson’s ratio in monolayer PdSe2. Comput. Mater. Sci. 160, 309–314 (2019).
Puretzky, A. A. et al. Anomalous interlayer vibrations in strongly coupled layered PdSe2. 2D Mater. 5, 035016 (2018).
Harel, E., Rupich, S. M., Schaller, R. D., Talapin, D. V. & Engel, G. S. Measurement of electronic splitting in PbS quantum dots by two-dimensional nonlinear spectroscopy. Phys. Rev. B 86, 075412 (2012).
Chi, Z. et al. Ultrafast energy dissipation via coupling with internal and external phonons in two-dimensional MoS2. ACS Nano 12, 8961–8969 (2018).
Yan, T., Qiao, X., Liu, X., Tan, P. & Zhang, X. Photoluminescence properties and exciton dynamics in monolayer WSe2. Appl. Phys. Lett. 105, 101901 (2014).
Sie, E. J. et al. Observation of exciton redshift–blueshift crossover in monolayer WS2. Nano Lett. 17, 4210–4216 (2017).
Roth, S. et al. Photocarrier-induced band-gap renormalization and ultrafast charge dynamics in black phosphorus. 2D Mater. 6, 031001 (2019).
Heyd, J. & Scuseria, G. E. Hybrid functionals based on a screened Coulomb potential. J. Chem. Phys. 118, 8207 (2003).
Shi, H. et al. Exciton dynamics in suspended monolayer and few-layer MoS2 2D crystals. ACS Nano 7, 1072–1080 (2013).
Zhang, X. et al. Phonon and Raman scattering of two-dimensional transition metal dichalcogenides from monolayer, multilayer to bulk material. Chem. Soc. Rev. 44, 2757–2785 (2015).
Liang, L. et al. Low-frequency shear and layer-breathing modes in Raman scattering of two-dimensional materials. ACS Nano 11, 11777–11802 (2017).
Monserrat, B. Electron-phonon coupling from finite differences. J. Phys. 30, 083001 (2018).
Reichardt, S. & Ludger, W. Nonadiabatic exciton-phonon coupling in Raman spectroscopy of layered materials. Sci. Adv. 6, eabb5915 (2020).
Kresse, G. & Furthmüller, J. Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set. Phys. Rev. B 54, 11169–11186 (1996).
Perdew, J. P., Burke, K. & Ernzerhof, M. Generalized Gradient Approximation Made Simple. Phys. Rev. Lett. 77, 3865–3868 (1996).
Sun, M. et al. Few-Layer PdSe2 Sheets: Promising Thermoelectric Materials Driven by High Valley Convergence. ACS Omega 3, 5971–5979 (2018).
Shishkin, M. & Kresse, G. Implementation and performance of the frequency-dependent GW method within the PAW framework. Phys. Rev. B 74, 035101 (2006).
Fuchs, F., Furthmüller, J., Bechstedt, F., Shishkin, M. & Kresse, G. Quasiparticle band structure based on a generalized Kohn-Sham scheme. Phys. Rev. B 76, 115109 (2007).
Kuklin, A. V. & Ågren, H. Quasiparticle electronic structure and optical spectra of single-layer and bilayer PdSe2: Proximity and defect-induced band gap renormalization. Phys. Rev. B 99, 245114 (2019).
Togo, A. & Tanaka, I. First principles phonon calculations in materials science. Scr. Mater. 108, 1–5 (2015).
De Giovannini, U., Hübener, H., Sato, S. A. & Rubio, A. Direct measurement of electron-phonon coupling with time-resolved ARPES. Phys. Rev. Lett. 125, 136401 (2020).
Hein, P. et al. Mode-resolved reciprocal space mapping of electron-phonon interaction in the Weyl semimetal candidate Td-WTe2. Nat. Commun. 11, 2613 (2020).
Acknowledgements
This work is supported by the National Natural Science Foundation of China (NSFC) (11535008, 11874350); The 111 Project of China (No. B13029); CAS Key Research Program of Frontier Sciences (Grant No. ZDBS-LY-SLH004). B.P. and B.M. acknowledge support from the Winton Programme for the Physics of Sustainability, and B.M. also acknowledges support from the Gianna Angelopoulos Programme for Science, Technology, and Innovation. The calculations were performed using resources provided by the Cambridge Tier-2 system operated by the University of Cambridge Research Computing Service (http://www.hpc.cam.ac.uk) and funded by EPSRC Tier-2 capital grant EP/P020259/1, and also with computational support from the UK Materials and Molecular Modelling Hub, which is partially funded by EPSRC (EP/P020194), for which access is obtained via the UKCP consortium and funded by EPSRC grant ref EP/P022561/1.
Author information
Authors and Affiliations
Contributions
L.Z. and F.C. conceived and designed the project. L.Z. performed the femtosecond pump–probe experiments, analyzed the data, and wrote the paper. B.P. and B.M conducted the theoretical part and wrote the corresponding part of the paper. Y.C.L., M.L.L., and P.H.T. performed and interpreted the Raman data. L.Z., B.Z., and C.P. performed the sample characterizations. All authors have participated in the interpretation of the experiments and contributed to the paper.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Li, Z., Peng, B., Lin, ML. et al. Phonon-assisted electronic states modulation of few-layer PdSe2 at terahertz frequencies. npj 2D Mater Appl 5, 87 (2021). https://doi.org/10.1038/s41699-021-00268-3
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41699-021-00268-3
- Springer Nature Limited
This article is cited by
-
Unusual photocarrier and coherent phonon dynamics behaviors of layered PdSe2 unveiled by ultrafast spectroscopy of the edge surface
Science China Physics, Mechanics & Astronomy (2024)