Abstract
Zymomonas mobilis (Z. mobilis), a bacterium known for its ethanol production capabilities, can also generate electricity by transitioning from ethanol production to electron generation. The purpose of this study is to investigate the ability of Z. mobilis to produce bioelectricity when utilized as a biocatalyst in a single-chamber microbial fuel cell (MFC). Given the bacterium's strong inclination towards ethanol production, a metabolic engineering strategy was devised to identify key reactions responsible for redirecting electrons from ethanol towards electricity generation. To evaluate the electroactivity of cultured Z. mobilis and its ethanol production in the presence of regulators, the reduction of soluble Fe(III) was utilized. Among the regulators tested, CuCl2 demonstrated superior effectiveness. Consequently, the MFC was employed to analyze the electrochemical properties of Z. mobilis using both a minimal and modified medium. By modifying the bacterial medium, the maximum current and power density of the MFC fed with Z. mobilis increased by more than 5.8- and sixfold, respectively, compared to the minimal medium. These findings highlight the significant impact of metabolic redirection in enhancing the performance of MFCs. Furthermore, they establish Z. mobilis as an active electrogenesis microorganism capable of power generation in MFCs.
Similar content being viewed by others
Introduction
The capability of electrochemically active microbes to extract the electrons in organic waste and transfer them extracellularly exceedingly attract academic interest1,2,3. The application of these microorganisms in bioenergy production (in the forms of hydrogen4, biofuel5, or bioelectricity6) and developing a new approach to treat organic wastewater are significant potentials that have turned this issue into one of the hot academic topics7. The microbial fuel cell (MFC) is an innovative platform to recruit electrochemical active microorganisms for bioelectricity production8,9. Although the MFCs’ applications in power generation and waste treatment10,11,12,13 were demonstrated, the chief barrier to accelerating the commercialization of MFCs is their low performance14,15. It is obvious that the activity of electrogenesis microorganisms plays the most critical role in this issue16,17, and manipulating metabolic reactions could be a unique and influential strategy to improve the efficiency of MFCs18,19,20.
The redox potentials of the involved species21,22, the microbial oxidative metabolism23, and the extracellular electron transfer (EET) mechanism20,24 affect the rate of electron production in MFCs. Considering the metabolic reactions of electrochemically active microorganisms, an increase in the concentration of Nicotinamide adenine dinucleotide (NAD) + hydrogen (H) (namely, NADH) improves the efficiency of EET25. Li et al. proved that metabolic engineering methods could be employed to increase the intracellular ratio of NADH/ NAD+, and consequently electron generation26. The cofactors NADH and NAD+ are essential for microorganism metabolism and their balance as a prerequisite for higher electricity output is crucial.
Zymomonas mobilis (Z. mobilis) is an ethanologenic bacterium that keeps redox balance during ethanol fermentation in the glycolysis pathway27,28. This bacterium metabolizes sugar via the Entner–Doudoroff (ED) pathway in conjunction with the enzymes pyruvate decarboxylase and alcohol dehydrogenase to produce ethanol. ED is an alternative glycolysis pathway, and in this pathway, glucose is converted directly to pyruvate without the production of adenosine triphosphate (ATP) or indirectly changed to pyruvate based on ATP production29. The fermentation pathway of Z. mobilis for ethanol production has a relatively simple respiratory system and it is the main pathway for electron transport. It chiefly consists of a type II NADH dehydrogenase (NDH), coenzyme Q10, and cytochrome bd terminal oxidase, and cytochrome C peroxidase as the major electron carriers30. One of the main consumptions of NADH in Z. mobilis catabolism is ethanol fermentation31. NADH is used as an electron carrier by respiratory chain NADH dehydrogenase, and NADH is oxidized by alcohol dehydrogenase of the pyruvate-to-ethanol pathway in ethanologenic Z. mobilis. The TCA cycle in bacteria is incomplete and does not function as catabolic pathways. Therefore, NADH can only be synthesized from GAP and glucose-6-phosphate dehydrogenase (ZWF) in the ED pathway32,33. The EET pathway transports intracellular electrons from NADH to extracellular electron acceptors25. Regarding the ability of Z. mobilis to transfer electrons extracellularly20, Yu-Geng et al. illustrated that Z. mobilis was able to generate considerable bioelectricity (2.0 mW/m2). In this research, to improve the microbial fuel cells several strategies were employed which most noticeable of them were the removal of biofilm and using Tween 80. The removal of the biofilm and c-type cytochrome contributed to the bioelectricity production of the cell, and also by using Tween 80 a higher voltage output was achieved. This revealed that the redox balance is an important requirement for higher electricity output34. But so far, the performance of microbial fuel cells inoculated with Z. mobilis bacteria has not been studied and the technique of metabolic engineering to improve its efficiency has not been investigated.
Regarding the performance of Z. mobilis, some studies used metabolic engineering strategies to produce byproducts by reducing the efficiency of ethanol production. Oliver et al.35 investigated the active respiratory chain of Z. mobilis to regenerate NAD+ and produce acetaldehyde by developing the stoichiometric model of the central metabolism. In their work, Z. mobilis' electron transport chain was demonstrated to be capable of balancing the redox state. By increasing flux through the electron transport chain and reducing the activity of the alcohol dehydrogenase reaction instead of ethanol, the production of acetaldehyde increased and the yield of acetaldehyde would reach 70% of the theoretical maximum value. Also, in another research, Yang et al.27 improved the yield of bioproducts such as lactate and isobutanol by the redirection of central carbon metabolism in Z. mobilis to redox-balanced products. Zymomonas mobilis pdc under inducible diverts pyruvate accumulation to other pathways as ethanol production is inhibited in PDC depletion conditions. Anaerobically, Lactate and isobutanol were produced at high yields from glucose using the PDC inducible strain. Lactate yield reached 70% and isobutanol yield reached 65% of theoretical maximums, respectively. So, these reports demonstrate that Z. mobilis has the potential of redirecting electron from ethanol production to electricity generation which has not been studied.
Regarding the issue that ethanol production in Z. mobilis aims to balance NADH/NAD+ on the one hand and electron balance in the cell on the other hand27, Z. mobilis has a high potential for electron production. In this study, a metabolic engineering strategy was utilized to design a regulatory-defined medium and influence the metabolic flux in Z. mobilis in order to shift NADH from ethanol production to electron production. This causes an increase in the regeneration of intracellular NADH which increases the NADH/NAD+ ratio and consequently can increase electron generation. To achieve this, a framework for identifying critical reactions that enhance electricity production in Z. mobilis was comprehensively investigated by useful technique flux balance analysis (FBA) as a constrained-based modeling approach to find multiple optimal solutions18. The model was capable to identify up-regulated and down-regulated reactions by comparing the fluxes of each reaction under NADH and ethanol maximization in order to redirect electron to produce more instead of ethanol production. In the second step, the enzyme regulators found in BRENDA36 were added to the culture medium to regulate target reactions. Finally, this modified medium was used to inoculate an MFC and the performance of the MFC was evaluated by comparing polarization and power density curves under various conditions.
Material and methods
In silico simulation
To find the desirable metabolic reactions and the related compounds, in-silico analysis using iEM439, the GEM for Zymomonas mobilis ZM1 was performed. This model includes 439 genes, 692 metabolic reactions, and 658 metabolites37. The distribution of metabolic flux was modeled using flux balance analysis (FBA), a constraint-based modeling approach. In this analysis, it is assumed that an organism will reach a steady state under any given environmental condition38. A pseudo reaction for reduction of NAD to NADH was added to the metabolic model and considered as a objective function to calculate the maximum possible rate of electrons production. All reversible reactions were set to 1000 and − 1000 mmolgDCW−1 h−1, except the ATPS4rpp reaction, whose bound was set to − 4 mmolgDCW−1 h−137. The intercellular irreversible reaction fluxes ranged between 0 and 1000 mmolgDCW−1 h−1 while the range for reversible reactions was between − 1000 and 1000 mmolgDCW−1 h−1. In order to simulate the growth of Z. mobilis in a glucose minimal medium, the lower bound of all exchange reactions except glucose, NH4+, H2O, SO4−2, O2, H+, PO4−2, and inorganic ions were set to zero. In addition, under anaerobic conditions, the lower bound for the oxygen exchange reaction was set to 0 mmolgDCW−1 h−137. All in-silico and batch-culture simulations were run with the glucose uptake rate setting at − 10 mmolgDCW−1 h−1. The simulation was done with MATLAB (R2017b) software and COBRA Toolbox and GLPK (GNU Linear Programming Kit) were used to solve linear programming problems39.
Identifying effective reactions and designing the regulatory defined medium
The LAMOS18 algorithm was applied to identify flux variability of each reaction and compare the metabolic reactions causing NADH and ethanol synthesis. By setting an objective function (generation of NADH or ethanol), FBA determined the maximum value of the objective function as the optimal viable solution by linear programming (LP)40,41. For all in-silico experiments, initially, the cell growth of the strain was simulated in the glucose minimal media, and the maximum biomass generating reaction was defined as an objective function. The optimal growth rate was set as a constraint in the following steps of simulation. Then, by limiting 100% of the optimal growth rate and setting the NADH or ethanol synthesis reaction in the metabolic network as the second objective function, the maximum NADH or ethanol production rate was obtained, and hence, the optima; value was bound in the metabolic model. Ultimately, for both ethanol and NADH objective functions, the model computes 10,000 optimal solutions. Using a threshold of 10−8, active reactions were identified, and then, for each of these conditions of maximum NADH and ethanol production, the flux variability for each reaction was calculated.
In order to identify the candidate reactions for up or down regulations, two criteria were considered. The first criterion, as demonstrated in Fig. 1, is that a reaction is appropriate for up-regulation if its minimum flux in the maximum NADH production rate is higher than its maximum flux in the maximum ethanol production rate. In contrast, a metabolic reaction is proper to be down-regulated if its flux under the ethanol maximum flux is higher than its flux under the NADH maximum flux. The second criterion was based on the activity difference for each metabolic reaction. It was calculated as a fraction of the entire solution (10,000 optimal solutions) where the reaction was classified as an active one in the first criterion. By comparing desirable and undesirable conditions, a positive difference indicated an up-regulation of a metabolic reaction and a negative difference implied a down-regulation of the reaction. Based on the simulation results, the target enzymes were identified, and by searching in the BRENDA database, the regulatory compounds that control the activity of the target enzyme were extracted. Following that, to assess the capability of Z. mobilis in electron generation by metabolic engineering, these regulators were added to the medium culture, and the effects of up- or down-regulation of predicted reactions were investigated.
Microorganism and culture media
Z. mobilis (ATCC 10,988, PTCC 1718) was taken from the Persian Type Culture Collection. The strain was grown in 50 ml of a complex medium containing 10 g L−1 peptone from meat, 10 g L−1 yeast extract, and 20 g L−1 glucose and cultured in a shaker incubator at 30 °C, 150 rpm for 14 h. Then, the culture approached medium-logarithm-phase conditions and it inoculated in the minimal medium. The composition of the minimal medium was glucose 20 g L−1, KH2PO4 1 g L−1, K2HPO4 1 g L−1, (NH4)2SO4 1 g L−1, NaCl 0.5 g L−1, MgSO4·7H2O 0.2 g L−1, CaCl2·2H2O 0.2 g L−1, Na2MoO4·2H2O 0.025 g L−1, FeSO4·7H2O 0.025 g L−137. After 18 h, the strain cultured in the minimal medium can be used to inoculate the MFC.
Analytical method to screening compounds
By using the BRENDA database and identifying the effective reactions through simulation and the LAMOS algorithm, the substances restricting the reactions of ethanol production were identified. In order to increase extracellular electron transfer, the additive must first decrease ethanol production and then increase the production of an electron. So, to choose the most effective substance, gas chromatography GC-2550TG (column temperature 150 °C, injector temperature 250 °C, detector temperature 250 °C, and FID detector type (Tief Gostar Faraz Company, Iran)) was used to measure the ethanol concentration and ferrozine iron kits (Zist Chem Diaqnosis, Iran) as a method to examine the amount of the electron generated, were applied. The amount of biomass was measured using a spectrophotometer (Cary50Conc, UV–vis Spectrophotometer, Australia) at the same time interval and an optical density of 600 nm. The remaining glucose in the culture medium was quantified using a colorimetric glucose oxidase kit (Pars Azmun, Iran). It was an enzymatic method based on glucose oxidation by glucose oxidase enzyme.
Iron reduction assay
The electroactivity of Z. mobilis was investigated using a soluble Fe (III) reduction method. It is commonly used for detecting microbial EET activity and can be measured using the ferrozine complex, a colorimetric dye42. This complex is a bacteria-produced Fe (II) and the intensity of the light absorbed at 560–600 nm was used to measure Fe (II) concentration. The minimal medium with inhibitor concentrations was inoculated with a 10% inoculum of the middle logarithmic phase. After growing the strain for 12 h in any new culture, a ferrozine reagent was used to determine Fe (II) concentrations in each sample. In addition, based on Fe (III) reduction assays, for the minimal medium without inhibitors, Fe (II) concentrations were measured for 12 h, and the results were analyzed to determine appropriate materials for modification of the minimal medium.
MFC assembly
The single chamber air cathode (MFC) with a total volume of 18 cm3, an electrode surface area of 9 cm2, and a height of 2 cm was designed and fabricated. This device is composed of three two cubic (Poly methyl methacrylate) (PMMA) chambers (1 cm in height, 7 cm in width, and 7 cm length), and the center of these chambers is a square with the size of 3 × 3 cm was cut using a laser beam to place anode and cathode electrodes.
The selected materials for MFCs’ electrodes should be biocompatible, corrosion-resistant, with high surface area, low electrical resistance, and chemically stable43,44,45. Anode characteristics affect biofilm formation, electron transfer, and substrate oxidation, making its material a crucial component in the performance of MFCs46. Nickel electrodes were found to provide a higher power density than carbon cloth47. Due to the hydrophilic nature of nickel, it is capable of rapidly absorbing anolyte and attaching biocatalysts instantly, which drastically increased the bioelectricity generation. Therefore, nickel was selected for the anode electrode. The anodic compartment was covered with a nickel plate (0.07 mm thick, 4 cm in width, and 4 cm in length). Regarding the importance of the surface area to expedite the cathodic reactions, graphite-coated stainless-steel mesh (mesh 400) was used for the cathode of the MFC. It was treated to achieve 0.5 mg cm−2 platinum (Pt) loading according to the previously published study48. The presence of Pt plays a critical role in the reduction of the activation over potential49. Bolts and nuts were inserted into holes at four corners of the top and bottom chambers. A schematic of the fabricated MFC is shown in Fig. 2.
Microbial enrichment of MFC
Considering the effective growth of biofilm under the open circuit conditions50, the start-up of the MFC was done during the measurement of the open circuit potential (OCP). The MFC were fed glucose as a substrate, and the anolyte`s volume was refilled with a fresh medium whenever a huge reduction in the volume of the anolyte due to the substrate evaporation and bacterial activity was observed. The OCP of the MFC was monitored in two cases, it was first done for the MFC inoculated by the minimal medium and without addition of any regulatory substance and then it was fulfilled for the MFC inoculated with the minimal medium enriched by an appropriate regulatory substance. The selection process of an appropriate regulatory substance was explained in "The effect of the selective regulators on ethanol production of Z. mobilis" section.
The volumetric current density IV (A m3) and coulombic efficiency (CE) of the MECs were calculated using the following equation in order to assess their performance49:
where MS indicates the molecular weight of the substrate (g/mole), tb is time (s), F represents Farada’s constant (C/mole−), ν indicates the volume of anolyte (L), ∆C is the concentration difference during a defined period (g/L), bes denotes the number of electrons exchanged per mole of oxygen (mole−/mole), and finally, I indicates the produced current (A).
Results and discussion
Analyzing the results of the algorithm LAMOS
Based on the results of the simulation by the LAMOS algorithm, the effective reactions to increase NADH production were detected. The details of these reactions are presented in supplementary materials, Tables S1 and S2. Figure 3 illustrates the effective metabolic pathways on the overproduction of NADH and consequently the enhancement of electron generation. According to the LAMOS algorithm, the alcohol dehydrogenase enzyme responsible for reaction ALCD2x_b (converting acetaldehyde to ethanol) was selected to be inhibited. Due to the activity of the pyruvate decarboxylase (PDC) enzyme, pyruvate is converted to acetaldehyde and carbon dioxide during an irreversible reaction in Z. mobilis. Ethanol is naturally produced along with the reduction of acetaldehyde in the presence of alcohol dehydrogenase which its production results in ATP production. ATP is produced by NAD+ in the glycolysis cycle and it is necessary to generate NAD+ and maintain energy production. To produce NAD+, 3-phosphate glycerol (g3p) must be oxidized by an electron receptor during glycolysis reaction (GAPD-f reaction). Thus, the electron is transferred from NADH to acetaldehyde, and under the influence of the enzyme alcohol dehydrogenase, acetaldehyde is converted to ethanol (ALCD2x-f reaction)29,51. In this manner, by targeting the enzyme alcohol dehydrogenase and inactivating it, the ethanol production pathway is blocked, therefore, NADH consumption for ethanol is prevented and it is reserved for electron generation.
The effect of the selective regulators on ethanol production of Z. mobilis
The effect of different regulatory compounds on the yield of ethanol production (namely the amount of produced ethanol (g L−1) to the amount of consumed glucose (g L−1)) is shown in Fig. 4A. The first bar in this chart represents control sample namely Z. mobilis cultured in the minimal medium and other bars indicate the influence of the selected regulatory compounds on the yield of ethanol production by adding them to the Z. mobilis medium. The ethanol production of Z. mobilis in the medium without regulatory compounds was presented in the Supplementary file 1 (Fig. S1). A remarkable and gradual increase in ethanol production in the absence of the regulatory compounds was obvious in Fig. S1. This implied the significant role of the regulatory compound in changing the direction of ethanol production to electron generation.
As shown in Fig. 4A, by using AgNO3, BaCl2, EDTA, NiCl2, and HgCl2 the yield of ethanol compared to the control sample increased 135.98%, 68.46%, 62.93%, 6.47%, and 26.84%, respectively. On the other hand, the use of CuCl2 and 1, 10-phenanthroline decreased the yield of ethanol by 63.65% and 71.46%, respectively. This indicated that CuCl2 and 1, 10-phenanthroline were the most influential compounds of this stage. According to the BRENDA database, it was reported that 1 mM CuCl2 causes 68% inhibition of alcohol dehydrogenase of Flavobacterium frigidimaris bacteria52, and 0.2 mM 1,10-phenanthroline is a strong inhibitor for the ethanol production of Z. mobilis53.
The effect of the selective regulators on the electron production of Z. mobilis
As mentioned in "Iron reduction assay" section, in order to analyze EET activity for Z. mobilis, the reduction tests of Fe (III) namely ferrozine assays were conducted. Regarding the reduction reaction of Fe (III) to Fe (II) (Fe (III) + e− → Fe (II)), the higher concentration of Fe (II) in the mixture indicated a higher rate of electron production of inoculated bacteria. The amount of Fe (II) concentration is illustrated in Fig. 4B.
As can be seen in Fig. 4B, the EET activity of cultured Z. mobilis in the minimal medium was higher in the presence of BaCl2, AgNO3, and CuCl2 compared to other additives. In other words, these additives decrease ethanol production. The highest concentration of Fe (II) in the modified medium containing CuCl2 reveals that this substance is the most effective regulator to revolve the EET activity of Z. mobilis. To speculate the evolution of electron production of Z. mobilis, the reduction of Fe (III) in the cultured Z. mobilis without a regulatory compound as a control sample was also achieved and shown in the Supplementary file 1, Fig. S2. Therefore, during the experiments, the concentration of CuCl2 was set at 1 mM at the beginning of the culture medium. The effect of CuCl2 on reducing the activity of alcohol dehydrogenase enzyme in vitro by performing enzyme assay has been proven in the previously published study52. Therefore, the present work mainly focused on the implementation of the modified culture medium to motivate Z. mobilis towards electron production and evaluate its performance by the power generation platform.
Monitoring open circuit potential (OCP)
Microbial enrichment was done during open circuit conditions. Two types of anolytes were used for this stage: (i) the cultured Z. mobilis in the minimal medium and (ii) the cultured Z. mobilis in the modified medium (namely the minimal medium with adding CuCl2 as selective regulator).
To maximize the flux of extracted electrons from Z. mobilis, and reduce the electrical loss, the growth of an effective biofilm is essential. The critical role of electroactive biofilm in MFC performance has been repeatedly reported50,54. It was demonstrated that the biofilm formation at the highest external resistance is much more uniform compared to lower external resistance which facilitated the nutrient diffusion into it and accelerated release of electrons. In addition, the possibility of biofilm detachment in the uniform biofilm is less than non-uniform one. These were the main reasons that microbial enrichment was implemented under open circuit conditions. The evolution of OCP measuring during microbial enrichment is shown in Fig. 5. During the MFC operation, the volume of anolyte decreased due to microbial activity, substrate consumption and anolyte evaporation. Therefore, to prevent the reduction of cell’s potential, the anolyte was refilled with the fresh substrate. The injection of the fresh medium to refill the anolyte shown by arrows enhanced the OCP of the MFC remarkably.
The dynamic response of the system as the variation of system potential to the refreshment of the consumed substrate was visible as long as microbial inoculation continued during OCP evolution. A potential cycle during the evolution of MFC potential can be divided into three phases: ascending phase, stationary phase, and descending phase. An increase in the stationary phase (i.e., horizontal section) of OCP evolution indicated the organic saturation of MFC’s anolyte. In other words, MFC’s bacteria have sufficient food for growth and achievement of redox reaction. The observation of the stable OCP after three stationary phases indicated that the biocatalyst had stabilized and microbial enrichment was successful55. The maximum OCPs of 1070 and 1012 mV were obtained for the MFCs cultured Z. mobilis in minimal and modified medium, respectively.
It was observed that changing to the closed circuit by applying an external resistance and then returning to open circuit conditions by removing the external resistance could enhance biofilm growth and increase OCP50,56. Figure 5B and C demonstrated that changing the open circuit to the closed-circuit conditions by exerting 5.5 MΩ increased OCP to 1070 mV (more than 37%). This was done for both MFCs and a significant increase in the OCPs was observed. The controlling electrons flow in a circuit by an external resistance highly affects the growth of biofilm57. In other words, applying an external resistance catalyzes the electron generation of the new formed biofilm and accelerates its growth. This plays a critical role during the inoculation of the MFC58. Mclean. et al. demonstrated the anode potential correlated with biofilm development. When an external resistance of 1 MΩ was applied, the growth of shewanella oneidensis MR-1 increased and a thick biofilm on the graphite anode was obtained, whereas only a thin biofilm formed on the anode with an external resistance of 100 Ω. As a result, the anode potential was enhanced by the development of biofilm59.
Another interesting point in Fig. 5 is the significant value of OCP of the MFC (1070 mV) which can be attributed to the role of the metal-based electrode. The use of nickel anode in the MFC on the one hand and the presence of inorganic compounds in the medium (such as KH2PO4, K2HPO4, (NH4)2SO4, NaCl, etc.) establish a hybrid system and the MFC can also operate as a Nickel-carbon battery. This was proved in the previously published study in which the utilization of different metal-based electrodes increased the OCP of the MFC even higher than theoretical values60.
The effect of external resistance
Regarding the main objective of this study to demonstrate that the suggested procedure of metabolic engineering could improve the bioelectricity of Z. mobilis and produce much more electrons instead of ethanol, the effect of applying different external resistance should be investigated. For all electrogenesis microorganisms, the electron is extracted due to the conversion of NADH to NAD+49. Concerning the EET of Z. mobilis, as mentioned previously, the strategy of metabolic engineering should affect alcohol dehydrogenase of the fermentation pathway and prevent consumption of electron by converting NADH to NAD+ and producing ethanol and hence, the accumulated electron can be redirected toward generation of electricity. To show this variation in the electron production of electrogens, the MFCs were polarized by applying different external resistances. Figure 6 shows the current and power densities evolution of the MFCs fed with Z. mobilis with minimal and modified mediums. The gradual depletion of organic content in MFCs decreased the rate of electron production. As soon as microorganisms were fed with fresh nutrients the rate of electron production increased. For both MFCs, an injection of fresh medium, increased current and power densities abruptly. This increase was shown in Fig. 6 by arrows. The maximum current density and power density for Z. mobilis cultured in the minimal medium at 15 kΩ resistance were 4.6 mA m−2 and 0.29 mW m−2, respectively. Meanwhile, for the modified medium (namely Z. mobilis + medium + CuCl2), these values at the same external resistance were 40.00 mA m−2 and 21.60 mW m−2, respectively. This shows that the modification in the bacteria medium increased the power density by more than 77-folds.
Regarding the gradual reduction in the organic content of the MFCs, the polarization and power density should be irrespective of substrate concentration. As a result, by applying each external resistance, the refreshment of the medium was done and after 180 h, the maximum value of the cell potential was recorded. The range of the external resistances to polarize the cell was 10 kΩ to 5.5 MΩ. To assess the MFC’s over-potentials or the galvanic losses of MFCs, the polarization and power density curves are useful tools. Considering the overpotentials of an MFC including activation, ohmic and concentration overpotentials, the variations in each of them can be observed in separate sections of the polarization curves. The activation overpotential is the first section of the polarization curve describing the loss due to the metabolic reactions in extracting electrons and the required activation energy to run the redox reactions in both cathode and anode electrodes. The ohmic overpotential as a linear potential drop (remarked in the second section) represents the loss of electron transfer in the anolyte and the electrical connection. Finally, the concentration overpotential describes the limitation of the mass transfer of species during the redox reactions and through the proton exchange membrane as well61. The polarization and power density curves for the MFCs are shown in Fig. 7.
The modification of the bacteria medium increased the maximum current and power densities of the MFC fed with Z. mobilis by more than 5.8-folds and six-folds compared to the minimal medium, respectively (Fig. 7A and C). In addition, this modification played a critical role in decreasing the ohmic overpotential. As can be seen, the slope of the middle section of the polarization curve representing the ohmic overpotential for Z. mobilis + medium + CuCl2 (modified medium) decreased significantly. Therefore, the produced electrons in the anolyte of the modified medium had the least loss to reach the electron acceptor. The first speculation might attribute this matter to the enhancement of anolyte conductivity due to the CuCl2 presence but the polarization curve of the MFCs fed with the minimal and modified mediums without the bacteria presence revealed that the presence of this compound produced a maximum of 3.79 mA m−2 and 1.29 mW m−2 which were a small proportion of total current and power densities of the cell, respectively (Fig. 7B and D). Therefore, the electron production of Z. mobilis in the MFC with a modified medium brought about such enhancement in the current and power densities. The electron production in the MFC was chiefly achieved by the presence of this bacteria and the modification of the medium, in addition, to improving the conductivity of the anolyte, exceedingly decreased the activation loss of bacteria during the electron’s extraction in the metabolic reactions.
One of the primary motivations behind the current study is to demonstrate the importance of metabolic engineering in enhancing the performance of MFCs enriched with bacteria that do not possess a remarkable tendency for electron generation. Z. mobilis is a bacterium known for its high ethanol production rather than electron generation. Considering previously published studies34, only one study has investigated the electrochemical performance of Z. mobilis in MFCs. The power density obtained from the cell inoculated with this species was approximately 2.0 (mW/m2), which was quite low. However, by enhancing the electron production pathways in Z. mobilis through metabolic engineering, the power generation increased to 21.6 (mW/m2). This accomplishment highlights the importance of metabolic engineering in strengthening electrogenesis pathways, a strategy with the potential for broader application to various microorganisms. It can significantly accelerate the commercialization of Microbial Fuel Cells (MFCs), particularly when the limited performance of introduced microorganisms poses a significant hurdle. Consequently, future research endeavors should consider adopting this approach or investigating alternative electrogenic species.
The overshoot phenomenon as a result of sudden electron depletion which decreases the current density was observed for Z. mobilis with the minimal medium (Fig. 7A, green dashed curve). In this situation, at low external resistance, the electrons suddenly passed the circuit and this led to an excessive demand for electrons which cannot be compensated by the metabolic reactions of bacteria. Consequently, the current density of the MFC dropped. Insufficient mass transport of redox species particularly the anodic reactions play a remarkable role in the occurrence of the overshoot phenomenon62. The modification of the medium could prevent the occurrence of the overshoot phenomenon by deactivation of alcohol dehydrogenase and provide sufficient NADH for electron extraction during an abrupt depletion of electrons at low external resistances. Based on the data of the system, the coulombic efficiencies of 0.511 and 0.63 for the minimal and modified medium, respectively, were calculated. Thus, the result demonstrates about 23% improvement in the coulombic efficiency for the modified medium compared to the minimal.
Biofilm morphology
An enhancement of electron production causes the accumulation of bacteria on the surface of the electrodes. This accumulation can be observed as a biofilm formed on the anode surface of MFCs playing a critical role as a final electron acceptor63. To confirm the accumulation of biomass on the anode surface of the MFCs inoculated with Z. mobilis in both minimal and modified medium, the images of field emission scanning electron microscopy (FESEM) were analyzed and the morphology of these MFCs anodes is shown in Fig. 8. The modification of bacteria medium increased the tendency of Z. mobilis to electron production and the higher aggregation of them on the anode surface of MFC with the modified medium is crystal-clear evidence for this claim (Fig. 8B). As the enhancement of biofilm density improves the power generation of cells50, the higher bioelectricity generation of the Z. mobilis in the modified medium can be attributed to the formation of the denser biofilm on the anode surface compared to the MFC’s anode fed with the minimal medium.
Conclusion
To being with, a compreheansive analysis of the metabolic pathways involved in bioelectricity generation is conducted. This analysis helps identify key bottleneck genes that effect the efficiency of these pathways. Bottleneck genes are those that have a significant impact on the overall metabolic flux and can potentially be targeted for improvement. LAMOS and BRENDA are compoutational tools used for the initial screening of existing compounds to identify potential candidates for switching metabolism and enhancing NADH production by analyzing the structure activity of compounds, these tools can predict their potential to modulate metabolic pathways and increase power density generation(Fig. 9.). The metabolic engineering of Zymomonas mobilis to modify its growth medium and enhance bioelectricity production has been successfully accomplished. This study has provided evidence that CuCl2 serves as an effective regulator, influencing the activity of alcohol dehydrogenase in the pyruvate-to-ethanol pathway. By promoting the conversion of NADH to NAD+, CuCl2 increases the rate of electron production. Moreover, the modification of the growth medium has significantly reduced the overpotentials observed in microbial fuel cells (MFCs), thereby facilitating the efficient transfer of generated electrons.
The medium modification has also proven beneficial in preventing the occurrence of the overshoot phenomenon. By deactivating alcohol dehydrogenase and ensuring sufficient NADH availability, the modified medium enables the extraction of electrons even under conditions of sudden electron depletion at low external resistances. Furthermore, the accumulation of Z. mobilis biofilm on the anode surface further supports the role of CuCl2 as a regulatory enzyme in enhancing MFC performance.
In summary, this study demonstrates the successful metabolic engineering of Z. mobilis and the efficacy of CuCl2 as a regulator, leading to improvements in bioelectricity production. The modification of the growth medium has shown promising results in reducing overpotentials, preventing overshoot, and promoting biofilm formation, ultimately enhancing the overall performance of MFCs.
Acknowlegements
The authors wish to acknowledge Tarbiat Modares University for its financial support of this research.
Data availability
All data generated or analysed during this study are included in this published article and in supplementary file 1.
References
Lu, Z. et al. Power-generating trees: Direct bioelectricity production from plants with microbial fuel cells. Appl. Energy 268, 115040 (2020).
Mitov, M., Chorbadzhiyska, E., Bardarov, I., Kostov, K. L. & Hubenova, Y. Silver recovery by microbial electrochemical snorkel and microbial fuel cell. Electrochim. Acta 408, 139941 (2022).
Meylani, V., Surahman, E., Fudholi, A., Almalki, W.H., Ilyas, N.& Sayyed, R. Biodiversity in microbial fuel cells: Review of a promising technology for batik wastewater treatment. J. Environ. Chem. Eng. 109503 (2023).
Ahmed, S. F. et al. Insights into the development of microbial fuel cells for generating biohydrogen, bioelectricity, and treating wastewater. Energy 254, 124163 (2022).
Banerjee, R., Kumar, S. J., Mehendale, N., Sevda, S. & Garlapati, V. K. Intervention of microfluidics in biofuel and bioenergy sectors: Technological considerations and future prospects. Renew. Sustain. Energy Rev. 101, 548–558 (2019).
Xu, T. et al. A freestanding carbon submicro fiber sponge as high-efficient bioelectrochemical anode for wastewater energy recovery and treatment. Appl. Energy 281, 115913 (2021).
Zhang, Y. et al. Microbial fuel cell hybrid systems for wastewater treatment and bioenergy production: synergistic effects, mechanisms and challenges. Renew. Sustain. Energy Rev. 103, 13–29 (2019).
Pal, M., Shrivastava, A. & Sharma, R. K. Electroactive biofilm development on carbon fiber anode by Pichia fermentans in a wheat straw hydrolysate based microbial fuel cell. Biomass Bioenergy 168, 106682 (2023).
Verma, M. & Mishra, V. Bioelectricity generation by microbial degradation of banana peel waste biomass in a dual-chamber S. cerevisiae-based microbial fuel cell. Biomass Bioenergy 168, 106677 (2023).
Wilberforce, T., Abdelkareem, M. A., Elsaid, K., Olabi, A. & Sayed, E. T. Role of carbon-based nanomaterials in improving the performance of microbial fuel cells. Energy 240, 122478 (2022).
Xu, Z. et al. New insights in light-assisted microbial fuel cells for wastewater treatment and power generation: A win-win cooperation. J. Power Sources 501, 230000 (2021).
Zhang, S., Zhang, S., Liu, H., Li, L. & Guo, R. Fe-NC-based cathode catalyst enhances redox reaction performance of microbial fuel cells: Azo dyes degradation accompanied by electricity generation. J. Environ. Chem. Eng. 11, 109264 (2023).
Yang, J., Cao, X., Sun, Y., Yang, G. & Yi, W. Recovery of microbial fuel cells with high COD molasses wastewater and analysis of the microbial community. Biomass Bioenergy 161, 106450 (2022).
Maddalwar, S., Nayak, K. K., Kumar, M. & Singh, L. Plant microbial fuel cell: Opportunities, challenges, and prospects. Bioresour. Technol. 341, 125772 (2021).
Liu, Y. et al. Porous α-Fe2O3 nanofiber combined with carbon nanotube as anode to enhance the bioelectricity generation for microbial fuel cell. Electrochim. Acta 391, 138984 (2021).
Deng, Q. et al. Performance and functional microbial communities of denitrification process of a novel MFC-granular sludge coupling system. Bioresour. Technol. 306, 123173 (2020).
Zhao, L. & Zhao, D. Hydrolyzed polyacrylamide biotransformation during the formation of anode biofilm in microbial fuel cell biosystem: Bioelectricity, metabolites and functional microorganisms. Bioresour. Technol. 360, 127581 (2022).
Firoozabadi, H., Mardanpour, M. M. & Motamedian, E. A system-oriented strategy to enhance electron production of Synechocystis sp. PCC6803 in bio-photovoltaic devices: Experimental and modeling insights. Sci. Rep. 11, 1–12 (2021).
Thapa, B. S. et al. Overview of electroactive microorganisms and electron transfer mechanisms in microbial electrochemistry. Bioresour. Technol. 347, 126579 (2021).
Zhao, J. et al. Microbial extracellular electron transfer and strategies for engineering electroactive microorganisms. Biotechnol. Adv. 53, 107682 (2021).
Cheng, D. et al. Impact factors and novel strategies for improving biohydrogen production in microbial electrolysis cells. Bioresour. Technol. 346, 126588 (2021).
Mohamed, H. O. et al. Enhancing power generation in microbial fuel cell using tungsten carbide on reduced graphene oxide as an efficient anode catalyst material. Energy 229, 120702 (2021).
Slate, A. J., Whitehead, K. A., Brownson, D. A. & Banks, C. E. Microbial fuel cells: An overview of current technology. Renew. Sustain. Energy Rev. 101, 60–81 (2019).
Qi, X. et al. Efficient power recovery from aromatic compounds by a novel electroactive bacterium Pseudomonas putida B6–2 in microbial fuel cells. J. Environ. Chem. Eng. 10, 108536 (2022).
Li, F. et al. Modular engineering intracellular NADH regeneration boosts extracellular electron transfer of Shewanella oneidensis MR-1. ACS Synth. Biol. 7, 885–895 (2018).
Li, F. et al. Modular engineering to increase intracellular NAD (H/+) promotes rate of extracellular electron transfer of Shewanella oneidensis. Nat. Commun. 9, 1–13 (2018).
Liu, Y. et al. Regulated redirection of central carbon flux enhances anaerobic production of bioproducts in Zymomonas mobilis. Metab. Eng. 61, 261–274 (2020).
Qiu, M. et al. Metabolic engineering of Zymomonas mobilis for anaerobic isobutanol production. Biotechnol. Biofuels 13, 1–14 (2020).
Xia, J., Yang, Y., Liu, C.-G., Yang, S. & Bai, F.-W. Engineering Zymomonas mobilis for robust cellulosic ethanol production. Trends Biotechnol. 37, 960–972 (2019).
Strazdina, I. et al. Aerobic catabolism and respiratory lactate bypass in Ndh-negative Zymomonas mobilis. Metab. Eng. Commun. 7, e00081 (2018).
Rutkis, R., Strazdina, I., Lasa, Z., Bruheim, P. & Kalnenieks, U. Ethanologenesis and respiration in a pyruvate decarboxylase-deficient Zymomonas mobilis. BMC Res. Notes 14, 1–6 (2021).
Hayashi, T. et al. The respiratory chain provides salt stress tolerance by maintaining a low NADH/NAD+ ratio in Zymomonas mobilis. Microbiology 161, 2384–2394 (2015).
Rutkis, R. et al. The low energy-coupling respiration in Zymomonas mobilis accelerates flux in the Entner-Doudoroff pathway. PLoS One 11, e0153866 (2016).
Geng, B.-Y. et al. Potential of Zymomonas mobilis as an electricity producer in ethanol production. Biotechnol. Biofuels 13, 1–11 (2020).
Kalnenieks, U. et al. Improvement of acetaldehyde production in Zymomonas mobilis by engineering of its aerobic metabolism. Front. Microbiol. 10, 2533 (2019).
Jeske, L., Placzek, S., Schomburg, I., Chang, A. & Schomburg, D. BRENDA in 2019: A European ELIXIR core data resource. Nucleic Acids Res. 47, D542–D549 (2019).
Motamedian, E., Saeidi, M. & Shojaosadati, S. Reconstruction of a charge balanced genome-scale metabolic model to study the energy-uncoupled growth of Zymomonas mobilis ZM1. Mol. BioSyst. 12, 1241–1249 (2016).
Kauffman, K. J., Prakash, P. & Edwards, J. S. Advances in flux balance analysis. Curr. Opin. Biotechnol. 14, 491–496 (2003).
Schellenberger, J. et al. Quantitative prediction of cellular metabolism with constraint-based models: The COBRA toolbox v2.0. Nat. Protocols 6, 1290–1307 (2011).
García Sánchez, C. E. & Torres Sáez, R. G. Comparison and analysis of objective functions in flux balance analysis. Biotechnol. Progress 30, 985–991 (2014).
Motamedian, E. & Naeimpoor, F. LAMOS: A linear algorithm to identify the origin of multiple optimal flux distributions in metabolic networks. Comput. Chem. Eng. 117, 372–377 (2018).
Jiménez Otero, F., Chan, C. H. & Bond, D. R. Identification of different putative outer membrane electron conduits necessary for Fe (III) citrate, Fe (III) oxide, Mn (IV) oxide, or electrode reduction by Geobacter sulfurreducens. J. Bacteriol. 200, e00347-e1318 (2018).
Kaur, R., Marwaha, A., Chhabra, V. A., Kim, K.-H. & Tripathi, S. Recent developments on functional nanomaterial-based electrodes for microbial fuel cells. Renew. Sustain. Energy Rev. 119, 109551 (2020).
Wu, G. et al. Polypyrrole/sargassum activated carbon modified stainless-steel sponge as high-performance and low-cost bioanode for microbial fuel cells. J. Power Sources 384, 86–92 (2018).
Yellappa, M., Modestra, J. A., Reddy, Y. R. & Mohan, S. V. Functionalized conductive activated carbon-polyaniline composite anode for augmented energy recovery in microbial fuel cells. Bioresour. Technol. 320, 124340 (2021).
Li, M. et al. Microbial fuel cell (MFC) power performance improvement through enhanced microbial electrogenicity. Biotechnol. Adv. 36, 1316–1327 (2018).
Mardanpour, M. M. & Yaghmaei, S. Characterization of a microfluidic microbial fuel cell as a power generator based on a nickel electrode. Biosens. Bioelectron. 79, 327–333 (2016).
Cheng, S., Liu, H. & Logan, B. E. Increased performance of single-chamber microbial fuel cells using an improved cathode structure. Electrochem. Commun. 8, 489–494 (2006).
Logan, B. E. Microbial Fuel Cells (John Wiley & Sons, 2008).
Zhang, L., Zhu, X., Li, J., Liao, Q. & Ye, D. Biofilm formation and electricity generation of a microbial fuel cell started up under different external resistances. J. Power Sources 196, 6029–6035 (2011).
Lee, K. Y., Park, J. M., Kim, T. Y., Yun, H. & Lee, S. Y. The genome-scale metabolic network analysis of Zymomonas mobilis ZM4 explains physiological features and suggests ethanol and succinic acid production strategies. Microb. Cell Factories 9, 1–12 (2010).
Kazuoka, T., Oikawa, T., Muraoka, I., Kuroda, S. I. & Soda, K. A cold-active and thermostable alcohol dehydrogenase of a psychrotorelant from Antarctic seawater, Flavobacterium frigidimaris KUC-1. Extremophiles 11, 257–267 (2007).
Kinoshita, S., Kakizono, T., Kadota, K., Das, K. & Taguchi, H. Purification of two alcohol dehydrogenases from Zymomonas mobilis and their properties. Appl. Microbiol. Biotechnol. 22, 249–254 (1985).
Mardanpour, M. M., Esfahany, M. N., Behzad, T. & Sedaqatvand, R. Single chamber microbial fuel cell with spiral anode for dairy wastewater treatment. Biosens. Bioelectron. 38, 264–269 (2012).
Mousavi, M. R. et al. Improvement of the microfluidic microbial fuel cell using a nickel nanostructured electrode and microchannel modifications. J. Power Sources 437, 226891 (2019).
Katuri, K. P., Scott, K., Head, I. M., Picioreanu, C. & Curtis, T. P. Microbial fuel cells meet with external resistance. Bioresour. Technol. 102, 2758–2766 (2011).
Jiang, J. et al. The influence of external resistance on the performance of microbial fuel cell and the removal of sulfamethoxazole wastewater. Bioresour. Technol. 336, 125308 (2021).
Mardanpour, M. M. et al. Factors affecting the performance of single chamber microbial fuel cell using a novel configuration. Iran. J. Energy Environ. 4, 343-e347 (2013).
McLean, J. S. et al. Quantification of electron transfer rates to a solid phase electron acceptor through the stages of biofilm formation from single cells to multicellular communities. Environ. Sci. Technol. 44, 2721–2727 (2010).
Shirkosh, M., Hojjat, Y. & Mardanpour, M. M. Boosting microfluidic microbial fuel cells performance via investigating electron transfer mechanisms, metal-based electrodes, and magnetic field effect. Sci. Rep. 12, 1–16 (2022).
Sravan, J. S., Butti, S. K., Verma, A. & Mohan, S. V. Phasic availability of terminal electron acceptor on oxygen reduction reaction in microbial fuel cell. Bioresour. Technol. 242, 101–108 (2017).
Rismani-Yazdi, H., Carver, S. M., Christy, A. D. & Tuovinen, O. H. Cathodic limitations in microbial fuel cells: An overview. J. Power Sources 180, 683–694 (2008).
Mahdi Mardanpour, M., Nasr Esfahany, M., Behzad, T. & Sedaqatvand, R. Single chamber microbial fuel cell with spiral anode for dairy wastewater treatment. Biosens. Bioelectron. 38, 264–269 (2012).
Author information
Authors and Affiliations
Contributions
E.M. and M.M. developed the main conceptual idea and superivised the work. H.A. performed the simulations and carried out the experiments. H.A. wrote the main manuscript text and presented the results. E.M. and M.M. revised the manuscript. All authors reviewed the manuscript.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Publisher's note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary Information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Ahmadpanah, H., Motamedian, E. & Mardanpour, M.M. Metabolic regulation boosts bioelectricity generation in Zymomonas mobilis microbial fuel cell, surpassing ethanol production. Sci Rep 13, 20673 (2023). https://doi.org/10.1038/s41598-023-47846-7
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-023-47846-7
- Springer Nature Limited