Abstract
The current COVID-19 pandemic outbreak poses a serious threat to public health, demonstrating the critical need for the development of effective and reproducible detection tests. Since the RT-qPCR primers are highly specific and can only be designed based on the known sequence, mutation sensitivity is its limitation. Moreover, the mutations in the severe acute respiratory syndrome β-coronavirus (SARS-CoV-2) genome led to new highly transmissible variants such as Delta and Omicron variants. In the case of mutation, RT-qPCR primers cannot recognize and attach to the target sequence. This research presents an accurate dual-platform DNA biosensor based on the colorimetric assay of gold nanoparticles and the surface-enhanced Raman scattering (SERS) technique. It simultaneously targets four different regions of the viral genome for detection of SARS-CoV-2 and its new variants prior to any sequencing. Hence, in the case of mutation in one of the target sequences, the other three probes could detect the SARS-CoV-2 genome. The method is based on visible biosensor color shift and a locally enhanced electromagnetic field and significantly amplified SERS signal due to the proximity of Sulfo-Cyanine 3 (Cy3) and AuNPs intensity peak at 1468 cm-1. The dual-platform DNA/GO/AuNP biosensor exhibits high sensitivity toward the viral genome with a LOD of 0.16 ng/µL. This is a safe point-of-care, naked-eye, equipment-free, and rapid (10 min) detection biosensor for diagnosing COVID-19 cases at home using a nasopharyngeal sample.
Similar content being viewed by others
Introduction
Coronavirus disease is a global public health issue with far-reaching effects on health systems and economies. On December 31, 2019, the first case of pneumonia of unknown origin was recorded in Wuhan, China. During the first week of January, the World Health Organization (WHO) announced these cases via social media1. The disease was recognized as a new type of severe acute respiratory syndrome β-coronavirus (SARS-CoV-2) in the same week, which impacted more than 200 countries1,2. The disease is extremely transmissible and has now become a pandemic on all continents3. As of July 2022, there have been more than 553 million confirmed cases of COVID-19 and over 6.3 million deaths globally, reported to WHO4. These data claim over 6% increase compared to the previous month (over 5.7 million new cases). The United States of America, India, Brazil, France, and Germany reported the highest number of laboratory-confirmed cases (more than 230 million cases in total) in August 20225. The clinical COVID-19 patients can present a range from asymptomatic to mild, to severe and critical6. Vaccination programs, which are now underway with more than 200 COVID-19 vaccines, are expected to take months to complete, and even with success, countries may struggle to attain herd immunity7,8. Although vaccination is an important strategy in the fight against the COVID-19 pandemic9, many challenges, such as immune senescence and comorbidities in ageing populations, remain10. Despite vaccination's high efficacy, some infections after vaccination are to be expected, such as an outbreak associated with a SARS-CoV-2 R.1 lineage variant in a skilled nursing facility following a vaccination program in Kentucky, USA11. With the discovery of new strains of SARS-CoV-2 in different countries, they are considered 70% more dangerous than the existing COVID-19 virus12. The Delta variant (SARS-CoV-2 B.1.617), which was dominant in some regions of India and the UK, is one of the most horrifying examples of viral genome mutation. This variant was made due to three different mutations that occurred simultaneously in the N-terminal domain (NTD) and the receptor-binding domain (RBD) of the SARS-CoV-2 spike protein,13. These mutations increase the immune evasion potential of these variants and make them undetectable by the available reverse-transcriptase quantitative polymerase chain reaction (RT-qPCR) primers designed previously for SARS-CoV-2 detection. The RT-qPCR primers are extremely specific and sequence-dependent. It means that mutations in the target sequence (that may generate new SARS-CoV-2 variants of concern such as Omicron (B.1.1.529) variants and its newly dominant BA.4 and BA.5 subvariants14) prevent the formation of complementary structures and this set of primers cannot be used for the detection of most recent mutated variants anymore. The emerging BA.4 and BA.5 Omicron VOC are similar to earlier Omicron subvariants, but mutations in their spike proteins make it easier for them to penetrate human cells. They feature 39 mutations throughout the viral genome, which cause changes in the amino acid sequence of the spike protein15. These mutations can help Omicron subvariants escape antibodies created by past COVID-19 vaccines or prior infections16. However, the emerging VOC could reinfect naturally infected or vaccinated individuals17. Hence, researchers have focused on developing multiplexed RT-qPCR primers using plasmonic nanoparticles for point-of-care COVID-19 diagnosis18. In order to design a new set of RT-qPCR primers, the genomic sequence of mutated variants should be sequenced and studied to provide enough information, which is a time- and cost-consuming procedure. Thus, early, accurate, mutation insensitive, rapid, and capable of detecting new variants of COVID-19 is of great importance in the control of emerging pandemics and in decreasing the number of new cases19,20,21,22. Three main COVID-19 diagnostic methods, with their disadvantages and limitations, are (1) Chest CT Scan is limited to highly equipped hospitals and is not specific23,24, (2) Immunochromatographic is useless in early-stage screening and gives false-positive results25, and (3) RT-qPCR is dependent on a specific COVID-19 detection kit and is prone to generating false-positive results or negative cases, which leads to the spread of this infectious disease to a wider community26. RT-qPCR has the capability of real-time monitoring of amplified products, quick detection, and quantitation of infectious units, but raises technical difficulties for point-of-care downsizing compared with end-point polymerase chain reaction18. Besides, they are expensive, require costly instruments, substantial laboratory setup, and specialized skilled personnel for operation and data interpretation27,28. Therefore, a specific and ultrasensitive biosensor can be considered a promising solution to overcome the limitations of all the discussed methods by providing higher stability, specificity, sensitivity, accuracy in real-time detection, and continuous monitoring. In addition, biosensors are essential in remote diagnosis centres due to the inaccessibility of advanced diagnostic instruments. The biosensors can be distributed at the citizens' door and decrease the risk of spreading COVID-19 by skipping unnecessary trips to clinics for testing. Moreover, the fabricated biosensor in this study can be used in detecting other viruses and bacteria, by simply redesigning the DNA probes, based on the genetic information of a specific target of interest.
The SARS-CoV-2 provides us with three essential indicators or biomarkers29,30, which can be detected by biosensors, as illustrated in Fig. 1: antigen, antibody, RNA. Moreover, the structural proteins, including spike (S) glycoprotein, small envelope (E) protein, matrix (M) protein, and nucleocapsid (N) protein, and also several accessory proteins31 are illustrated in Fig. 1. The limiting factors that impact the DNA hybridization biosensor performance are the proper immobilization of the ssDNA probe and accessibility to target DNA32,33,34,35,36. Hence, a variety of nanoparticles were used in the fabrication process to enhance the immobilization and performance of biosensors owing to their high surface area37,38. One type of nanoparticle widely used in this process is gold nanoparticles (AuNPs), as it provides a suitable base for immobilization of the ssDNA probe through the latter 5’-phosphate anchors39. Furthermore, AuNPs are biocompatible40, have excellent conductivity41, are effective catalysts42 and have unique surface plasmon resonance43, high surface-to-volume ratio44, colorimetric-based biosensing capability45 and high surface to volume ratio46,47. All these unique properties make AuNPs suitable candidates for the fabrication of DNA hybridized biosensors. Moreover, simultaneous targeting of four different parts of the viral genome would eliminate the impact of new mutations in the virus genome on the biosensor function and reduce the mutation sensitivity of the fabricated biosensor. The developed biosensor can detect the infection prior to sequencing and study the genomic information of new variants. In this study, a highly sensitive and accurate DNA-based AuNPs biosensor was fabricated for the detection of SARS-CoV-2.
Results
Nanoparticles characterization
The HR-TEM micrograph of synthesized GO has presented in Fig. 2a. The HR-TEM micrograph shows that AuNPs are distributed individually without any visible aggregation (Fig. 2b). They all rang below 20 nm without the formation of any large particles. The HR-TEM micrograph of GO/AuNPs also reveals the successful hybridization of these nanoparticles (Fig. 2c). The synthesized AuNPs solution illustrates a clear ruby red color with the UV–Vis absorption band at 519 nm (Fig. 3a), as confirmed by Yuan, et al.48. The hybrid of GO/AuNPs provides us with two significant absorption peaks at 240 nm (the characteristic UV spectrum of GO49,50 at 232 nm) and 522 nm (the characteristic UV spectrum of AuNPs51) that justify the accomplished anchoring of AuNPs over the GO (Fig. 3b). The XRD analysis of Au-NP, GO, and GO/Au-NP has identified the crystalline material phases. The Au-NP XRD analysis shows five diffraction patterns at 38.25° (111), 44.4° (200), 64.68° (220), 77.69° (311), and 81.84° (222). The 38.18° (111) peak corresponds to the AuNPs’ predominant orientation. The XRD analysis of GO has a single peak at 10.65° since the graphite flakes were oxidized to GO. Finally, the XRD analysis of GO/Au-NP reveals peaks at 11.8° that contribute to GO, while 38.30° (111), 44.36° (200), 64.56° (220), and 77.60° (311) contribute to AuNPs (Fig. 3d). These peaks confirm the immobilization of AuNPs over GO. Besides, the XRD peak at 21.36° is related to the partial reduction of GO, which might be caused by ultrasonication of GO before characterization, as explained in other literature52.
Characterization of synthesized nanoparticles and biosensor. (a) AuNPs, SCVPs capped AuNPs, virus RNA/SCVPs capped AuNPs UV–Vis absorption, (b) GO, GO/AuNPs, SCVP4 capped GO/AuNPs, virus RNA/SCVP4 capped GO/AuNPs UV–Vis absorption, (c) Raman spectroscopy of GO, Cy3/SCVP4 capped GO/AuNPs, sandwiched dual-platform in the presence of viral RNA, (d) XRD patterns of GO, AuNPs, and GO/AuNPs, Biosensor (e) before, and (f) 10 min after incubation with the SARS-CoV-2 RNA at 37 °C.
Capture probe capping of nanoparticles
The functionalization of AuNPs with the SCVPs cap shifted the visible color of AuNPs to red pinkish from the ruby red color of the gold nanoparticle solution (Fig. 3e). The UV–vis absorption of synthesized AuNPs shifted from 519 to 525 nm when they were capped with SCVPs (Fig. 3a). This visible naked-eye color shifting and UV–vis spectroscopy peak shifting are due to the AuNPs’ diameter increasing after capping with SCVPs and confirmed proper SCVPs capping53. In the same manner, the UV–vis spectroscopy of Cy3/SCVP4 capped GO/AuNPs was red-shifted to 524 nm from the 522 nm peak of GO/AuNPs and indicates the appropriate capping of thiolated Cy3/SCVP4 (Fig. 3b). However, Cy3/SCVP4 capped GO/AuNPs UV–vis absorption demonstrates a slight shift compared to SCVP capped AuNPs since the GO/AuNPs are much bigger and the changes in diameters are not significant. Besides, the HR-TEM micrograph of SCVP capped AuNPs indicates that the particles are individually dispersed without any visible aggregation or formation of a large entity in the absence of viral target RNA and prior to hybridization (Fig. 2d). In Fig. 2d, the mixture of successfully synthesized SCVP1-capped AuNPs, SCVP2-capped AuNPs, and SCVP3-capped AuNPs were presented, and there is no sign of agglomeration due to the interaction between AuNPs or SCVPs. There is also no complementary area among SCVPs, which eliminates the chance of unwanted agglomeration in the absence of target viral RNA.
Furthermore, Atomic Force Microscopy (AFM) topography (Fig. S1) confirms the well-dispersion of SCVP capped AuNPs, which, according to Csaki, et al.54 might be attributed to electrostatic repulsion. The AFM topography micrograph of SCVP4 capped GO/AuNPs further confirmed the AuNPs attachment on the GO sheet.
Biosensor analytical performance
The sensitivity of SCVP-capped AuNPs towards the viral RNA was investigated by monitoring the UV–vis absorbance at 660 nm. To optimize and standardize the ratio of each SCVP to AuNPs, three different concentrations of SCVP1-3 (0.5, 1, and 2 µM) were used to functionalize the AuNPs. Moreover, the GO/AuNPs were capped with three different concentrations of SCVP4 (0.5, 1, and 2 µM). Among the 12 tested combinations, the 1 µM SCVP1 capped AuNPs (Fig. 4a), 1 µM SCVP2 capped AuNPs (Fig. 4b), 0.5 µM SCVP3 capped AuNPs (Fig. 4c), and 2 µM SCVP4 capped GO/AuNPs (Fig. 4d) provide the highest sensitivity towards the viral RNA (1 ng/µL) while incubating for 10 min. Therefore, the equivalent amounts of optimized SCVP1-3 capped AuNPs (1 µM SCVP1, 1 µM SCVP2, 0.5 µM SCVP3) and SCVP4 capped GO/AuNPs (2 µM SCVP4) were mixed and labelled as “SCVPM” to obtain the highest sensitivity of the biosensor toward the virus RNA. The introduction and agglomeration of SCVPM to viral RNA would cause a ~ 50 nm red-shift in the UV–vis absorbance at 660 nm. The effect of incubation temperature on the sensitivity of SCVPM was assessed. To this end, the concentration of 1 ng/µL viral RNA was incubated with SCVPM and their mixture in the range of 20–60 °C for 10 min (Fig. 4e). The optimum temperature was 35 °C. In addition, the change in 660 nm absorbance of SCVPM in response to various concentrations of viral RNA was studied to indicate the limit of detection (LOD). Logarithmic transformation of data is a useful and frequent method regarding the concentration versus intensity in SERS calibration curves. The log concentration vs intensity spreads out the data so that the shape and quality of the fit are clearly visible when the concentrations cover a wide range. When the data is exhibited at target RNA logarithmic concentration, the data yields a linear response with an R2 correlation coefficient value of 0.9832. The error bars were calculated by three repeated measurements of each concentration of target SARS-CoV-2 RNA. The LOD was designated to be 0.16 ng/µL for SCVPM (Fig. 4f). The 10 Kb distance between the probe-target location of SCVP4 and SCVPM in SARS-CoV-2 RNA prevents any interference of probe hybridization with virus RNA while the color shifting due to surface plasmon resonance remains unpretentious (Fig. 4b). The linear response and continuous increase in absorbance justify the reliable and constant response of the biosensor toward viral RNA.
The analytic performance of fabricated biosensor. Absorbance at 660 nm for the AuNPs coated with 0.5, 0.1, and 2 µM of (a) SCVP1, (b) SCVP2, (c) SCVP3, and (d) SCVP4 upon the addition of SARS-CoV-2 RNA. (e) Effect of temperature on the response of SCVPM gold nanoparticles to the SARS-CoV-2 RNA when RNA concentration kept constant at 1 ng/μL. (f) The linear curve of SERS intensity at 1468 cm − 1 in response to target RNA concentration.
Detection of SARS-CoV-2
The fabricated biosensor is a dual platform sandwich DNA biosensor for the detection of SARS-CoV-2 to increase accuracy, selectivity, and sensitivity. The first developed platform contains SCVP1-3 capped AuNPs, while the second platform employs Cy3/SCVP4 capped GO/AuNPs to detect viral RNA. Hence, the dual-platform detection steps are as follows:
Naked eye detection
The first platform of this biosensor has been designed to report the presence and detection of SARS-CoV-2 RNA in the visual appearance noticeable to the naked eye. This would make the test results approachable even by the layman. As previously stated, the introduction of viral RNA to the first platform of the biosensor (SCVP1-3 capped AuNPs) at 35 °C for 10 min would result in an agglomeration between these two, which would increase the 660 nm absorbance by ~ 50 nm and induce the solution color shift from red to blue (Fig. 3f), which is in accordance with the report of previous studies31,55. This is a significant and distinguishable marker in the visual appearance of the test solution which can be observed by the human naked eye. The intensity of the blue color correlates with the concentration of viral RNA. To eliminate false-positive results, the second platform of biosensor has been designed and employed.
Fluorometric detection
Since there might be the possibility of AuNP self-agglomeration in the absence of viral RNA due to available ions and metabolites in the test sample, this biosensor employed Cy3/SCVP4 capped GO/AuNPs as a second transducer platform. In the case of positive results, the second platform could act as a Surface-enhanced Raman scattering (SERS) owing to its fluorescence quenching and narrow spectral bandwidth curve for the intensity of the Cy3 peak at 1468 cm-1 (Fig. 3c). The coupling of the SCVP1-3 capped AuNPs platform and the Cy3/SCVP4 capped GO/AuNPs platform for target viral RNA generates a locally enhanced electromagnetic field ‘hot spot’ and significantly amplifies the SERS signal. The hybridization of SCVP4 with virus RNA leads to the proximity of Cy3 and AuNPs that induce strong SERS signals. The SERS intensity is enhanced by both the local electromagnetic field due to the nanoparticle aggregated hot spots originating between the GO-AuNP and AuNPs and the chemical enhancement between the AuNPs and the Cy3. The SERS signals confirm the presence of the target DNA sequence in the fabricated dual-platform biosensor. This design suggests a novel, highly accurate, and selective biosensor for both naked-eye detection and SERS-based detection of SARS-CoV-2 in biospecimens.
Discussion
In this study, we report the design and fabrication of a dual-platform DNA/GO/AuNP biosensor. This biosensor has been developed based on the antisense-specific binding ability of oligonucleotides toward viral RNA and the unique surface plasmon resonance of gold nanoparticles. To this end, four oligonucleotide probes were designed and immobilized on two different nanomaterial platforms. These four oligonucleotide probes targeted different regions of the virus genome (N-gene, E-gene, and ORF1ab) at the same time and increased the selectivity and sensitivity of the biosensor. The first three probes were modified by the thiol group to be immobilized on synthesized AuNPs to provide the first platform. The second platform was fabricated by immobilization of the fourth thiol-modified probe containing the Cy3 marker on the GO/AuNPs hybrid. The optimized and standardized first platform detects SARS-CoV-2 positive cases within 10 min after the addition of total extracted RNA from the nasopharyngeal sample. The efficient and selective agglomeration of SCVP-capped AuNPs in the presence of viral RNA would significantly influence the surface plasmon resonance of AuNPs with a 50 nm red-shift in 660 nm UV–vis absorbance. This leads to shifts in the color of the solution from red to blue, which can be recognized by the human naked eye. To eliminate the possibility of false-positive results, the second platform was designed based on SERS. Hybridization of two platforms together with the target virus RNA would lead to the formation of a sandwich configuration. This conformation enhances the fluorescence quenching of Cy3 (RAMAN tag), confirming the positive result and the existence of viral RNA in the sample with a LOD of 0.16 ng/µL. Since the fabricated biosensor targets four different regions of SARS-CoV-2 viral genome, in case of mutation in one of the target sequences, the other three probes could detect the new variants prior to any sequencing. Moreover, visible biosensor color shifting is another benefit of fabricated biosensor which eliminates the dependency on trained personnel and facilitates the detection process. This equipment-free and safe point-of-care biosensor rapidly (10 min) detect COVID-19 using a nasopharyngeal sample. According to Table 1, this LOD is much better than some of the newly developed metal-based biosensors. Furthermore, the employed methodology in this study ensures its feasibility even with a new mutation in the virus genome during its global spread since four different regions of viral RNA have been targeted simultaneously. Moreover, this biosensor has been validated for real-time sample analysis extracted from confirmed COVID-19 positive patients. As a result, this study reports the fabrication of sensitive, specific, user-friendly, rapid, and sophisticated equipment-free biosensors, which can be utilized directly by layman end-users and are potentially appropriate for future diagnosis of other viruses and pathogens with proper adjustments.
It is believed that the designed colorimetric and SERS bioassays could be considered for the detection of various pathogens (e.g., Haemophilus influenzae, SARS-CoV, MERS-CoV, Ebola virus, Zika virus, and dengue virus) by modifying their oligonucleotide probe sequences according to the genome sequence of the target pathogens.
Materials and methods
Chemicals and instruments
All the chemicals used in this study were procured from reputable commercial suppliers without any further purification. All selected oligonucleotides were synthesized and provided by Integrated DNA Technologies (IDT), Singapore. Thermo Scientific GenPure UF/UV, Ultrapure Water System was used to prepare the ultra-pure water (UPW) for this study. The nasopharyngeal specimens were collected from the positive confirmed cases of COVID-19 inpatients (double-checked with two separate RT-qPCR tests) from Baqiyatallah University of Medical Sciences and stored at 4 °C for same-day analysis at the School of Advanced Technologies in Medicine, Tehran University of Medical Sciences, Tehran, Iran. Accordingly, informed consent from all subjects and/or their legal guardian(s) for study participation was obtained. This study was reviewed and approved by the ethical committee of the Baqiyatallah University of Medical Sciences, Iran (IR.BMSU.REC.1399.183) and all the experiments were performed in accordance with the relevant guidelines and regulations.
Biosensor development strategy and principle
Researchers who studied the genomic sequence of SARS-CoV-2 in the current pandemic have reported the continuous mutations inside the virus genome, which makes it challenging to design a single specific diagnostic probe. According to the Centers for Disease Control and Prevention (CDC) and WHO up to this date, four different major global variants of concern (VOC), were labeled in 2021 as alpha, beta, gamma, and delta61,62. These variants were generated due to the mutations accrued in different regions of the virus genome, as presented in Table 2. As it can be extracted from Table 2, these VOCs were caused by a simultaneous mutation in different parts of the virus genome. Unfortunately, current detection methods such as RT-qPCR only target one specific locus of the virus genome, which would be useless if a mutation occurred at those specific loci. Hence, in this study, we have focused on three genomic regions, which are more conserved: (1) RNA-dependent RNA-Polymerase gene (RdRp), (2) Envelope protein gene (E gene), and (3) Nucleocapsid phosphoprotein gene (N gene). To increase the accuracy of the biosensor, eliminate the effect of new, unknown mutations, and decrease false (positive/negative) results, four different SCVPs complementary to different regions inside these conserved areas were designed. Although three of these SCVPs were capped on the AuNPs for visual naked-eye detection of the viral genome, one of them was additionally labelled with Cy3 fluorescent dye and capped over the GO/Au-NP. The Cy3/SCVP4 capped GO/AuNPs is an extra diagnosis platform to increase the accuracy of the biosensor for quantitative purposes. The schematic view and detection mechanism of the dual-platform biosensor is illustrated in Fig. 5a.
Antisense oligonucleotide design
The whole genomic data sequence of the virus has been obtained from NCBI, the WHO, and GISAID (Munich, Germany). By following the WHO guideline, studying the mutation-prone area and mutation rate, and by employing the Basic Local Alignment Search Tool (BLAST) (https://blast.ncbi.nlm.nih.gov/Blast.cgi), four oligonucleotide sequences were designed for the present study, which were labelled as SARS-CoV-2 Probes (SCVP) in Table 3. Furthermore, the SCVPs were verified by in-silico studies such as multiple sequence alignments with the other potential non-target genomes using MEGA5 software (http://www.megasoftware.net/) and BLAST (Tables S1-4) as presented in Fig. 5b. The physical characterization of the designed SCVPs is listed in Table S5. SCVP1 and SCVP3 were functionalized by the thiol modifier at the 5’ end, while SCVP2 and SCVP4 were thiolated at the 3’ end. Furthermore, SCVP4 has the Cy3 labelling at the 5’ end. Besides, the 6-carbon spacer has been placed in between the DNA bases and the thiol group to eliminate the interference effect of AuNPs in RNA/DNA hybridization. These functionalized SCVPs are capped to prevent gold nanoparticle agglomeration in the presence of SARS-CoV-2 RNA due to their complementary binding properties. The selected target sequences in SARS-CoV-2 RNA and their complementary DNA employed in the fabrication of the SCVPs are listed in Table 3.
Synthesis of nanoparticles
Graphene oxide (GO) was synthesized through the modified Hummer’s method67. A mixture of 10:1:0.5 of concentrated H2SO4/H3PO4/KMnO4 was added to 1 g of graphite flakes and stirred for 3 days at 40 °C while the mixture’s color shifted from dark purple-green to dark brown. To terminate the reaction, 150 g of ice cubes and 7 ml of H2O2 were added to the solution. The yellowish graphene oxide was washed with HCl, rinsed with deionized water, and centrifuged three times until a pH of 5 was achieved. The GO pellets were collected, freeze-dried for 36 h, and ground into powder. The gold nanoparticles were synthesized following the Wang, et al.68 method. A total of 35 mL of sodium citrate solution (40 mM) was added to the preheated (90 °C) 350 mL of HAuCl4·3H2O (1 mM) while staring on top of the hotplate, which turned the mixture’s color dark red. The solution refluxed for at least 20 min and cooled down to room temperature before passing through the 0.45 µm syringe filter. The synthesized AuNPs were stored in a dark bottle at 4 °C. Finally, the hybridization and synthesis of GO/AuNPs. Although there is plenty of literature published on the modification of GO with AuNPs69,70,71, the Zhu, et al.72 technique is a reliable method that fits our biosensor application in this study has been selected. A 10% (w/v) aqueous solution of synthesized GO with ultra-pure water was ultrasonicated for 2 h before the addition of 0.1 L of HAuCl4.·3H2O (1 mM). This suspension was stirred for another hour to encourage the interaction of the Au+ ion with GO. The aqueous solution was heated up to 90 °C, and then 2 mL of sodium citrate solution (300 mmol) was added, and the stirring continued for the next 4 h. After cooling down the solution to room temperature, it was centrifuged at 6000 rpm for 2 h followed by a multiple step washing with ultra-pure water to eliminate the unbounded AuNPs. The synthesized GO/AuNPs hybrid was resuspended in ultra-pure water and stored in dark bottles inside the fridge for future characterization and applications.
Nanoparticle functionalization
The thiolated SCVP oligonucleotides require chemical activation before the functionalization of AuNPs. To this end, 10 mM Tris-(2-Carboxyethyl) phosphine hydrochloride (TCEP), a reducing agent, was prepared in a fresh batch and added to 4 separate 2 mL microtubes containing 100 µL of each SCVP. These 4 tubes were incubated at 25 °C for 1 h to promote the reduction of disulfide bonds. The activated thiol SCVP1-3 was added to 3 separate microtubes containing synthesized AuNPs (400 µL) while the activated thiol SCVP4 was added to the synthesized GO/AuNP hybrid microtubes. All the microtubes were covered in aluminium foil to prevent light, vortexed, and incubated at 25 °C for 18 h. Afterwards, 500 µL PBS buffer (10 mM, pH 7.4) and 100 µL Tween 20 (0.1%) were added to each microtube and incubated for another 30 min. The next step is DNA functionalized nanoparticle salt-ageing which 10 µL NaCl (1 mM) increment was added during 1 h to each SCVP tube in the step of 3 min. This gradual addition of NaCl changes the parallel conformation of oligonucleotides to an upright conformation and facilitates the RNA/DNA hybridization process. The SCVP microtubes were incubated in a dark environment at 25 °C for 48 h. The 4 DNA functionalized nanoparticles were centrifuged at 8000 rpm for 20 min, the supernatant that contains unbounded free DNA was disposed of, and nanoparticle pellets were dispersed in PBS:NaCl buffer (1:100). This washing process was repeated 3 times, and the final nanoparticle pellets were dispersed again in PBS:NaCl buffer (1:100) and stored separately at 4 °C.
The SCVPs will hybridize with their target sequence in the viral genome while SCVPs1-3 cap the AuNPs. This would lead to the agglomeration of AuNPs and a change in the visual appearance of the color of the solution. AuNPs are well-known for their photophysical properties, triggered by influencing nanoparticle size and shape on surface plasmon resonance (SPR). Therefore, the aggregation of AuNPs results in a color shift of the solution from red to blue, owing to interparticle SPR coupling. On the other hand, in some cases, there might be false solution color changes (false-positive result). Since the GO/AuNPs were capped with the SCVP4 containing Cy3 as a RAMAN tag, this false positive result can be assessed by the fluorescence quenching property of Cy3 (surface-enhanced Raman scattering). The intensity peak at 1468 cm-1 correlates with Cy3 and AuNP quenching properties and confirms the presence of the viral genome52,73. In the case of peak absence at 1468 cm-1, the test would be considered a false positive.
Ethical approval
This study was reviewed and approved by the ethical committee (IR.BMSU.REC.1399.183) of the Baqiyatallah University of Medical Sciences, Tehran, Iran.
Data availability
All data are available in the main text or supplementary materials.
References
Calgua, E. in COVID-19 Pandemic (eds Hidalgo, J., Rodríguez-Vega, G. & Pérez-Fernández, J.) 163–172 (Elsevier, 2022).
Tang, Z. et al. A materials-science perspective on tackling COVID-19. Nat. Rev. Mater. 5, 847–860. https://doi.org/10.1038/s41578-020-00247-y (2020).
Rocha, A. L. S. et al. Fomites and the environment did not have an important role in COVID-19 transmission in a Brazilian mid-sized city. Sci. Rep. 11, 15960. https://doi.org/10.1038/s41598-021-95479-5 (2021).
Organization, W. H. Weekly epidemiological update on COVID-19 - 13 July 2022, <https://www.who.int/publications/m/item/weekly-epidemiological-update-on-covid-19---13-july-2022> (2022).
Organization, W. H. WHO Coronavirus (COVID-19) Dashboard With Vaccination Data, <https://covid19.who.int > (2021).
Au, G. G. et al. Characterisation and natural progression of SARS-CoV-2 infection in ferrets. Sci. Rep. 12, 5680. https://doi.org/10.1038/s41598-022-08431-6 (2022).
Petherick, A. et al. A worldwide assessment of changes in adherence to COVID-19 protective behaviours and hypothesized pandemic fatigue. Nat. Hum. Behav. https://doi.org/10.1038/s41562-021-01181-x (2021).
Haynes Barton, F. et al. Prospects for a safe COVID-19 vaccine. Sci. Transl. Med. 12, eabe0948. https://doi.org/10.1126/scitranslmed.abe0948 (2020).
Wu, Y. et al. A recombinant spike protein subunit vaccine confers protective immunity against SARS-CoV-2 infection and transmission in hamsters. Sci. Transl. Med. 13, eabg1143. https://doi.org/10.1126/scitranslmed.abg1143 (2021).
Koff Wayne, C. et al. Development and deployment of COVID-19 vaccines for those most vulnerable. Sci. Transl. Med. 13, eabd1525. https://doi.org/10.1126/scitranslmed.abd1525 (2021).
Cavanaugh, A. M. et al. COVID-19 outbreak associated with a SARS-CoV-2 R.1 lineage variant in a skilled nursing facility after vaccination program - Kentucky, March 2021. MMWR Morb. Mortal. Wkly. Rep. 70, 639–643. https://doi.org/10.15585/mmwr.mm7017e2 (2021).
Rehman, A. U., Singh, R. & Agarwal, P. Modeling, analysis and prediction of new variants of covid-19 and dengue co-infection on complex network. Chaos Solitons Fract. 150, 111008. https://doi.org/10.1016/j.chaos.2021.111008 (2021).
Planas, D. et al. Reduced sensitivity of SARS-CoV-2 variant Delta to antibody neutralization. Nature 596, 276–280. https://doi.org/10.1038/s41586-021-03777-9 (2021).
Reuschl, A.-K. et al. Enhanced innate immune suppression by SARS-CoV-2 Omicron subvariants BA. 4 and BA. 5. Biorxiv https://doi.org/10.1101/2022.07.12.499603 (2022).
Durmaz, V. et al. Structural bioinformatics analysis of SARS-CoV-2 variants reveals higher hACE2 receptor binding affinity for Omicron B.1.1.529 spike RBD compared to wild type reference. Sci. Rep. 12, 14534. https://doi.org/10.1038/s41598-022-18507-y (2022).
Li, L. et al. Structural basis of human ACE2 higher binding affinity to currently circulating Omicron SARS-CoV-2 sub-variants BA. 2 and BA. 1.1. Cell 185, 2952–2960 (2022).
Rahman, S. et al. COVID-19 reinfections among naturally infected and vaccinated individuals. Sci. Rep. 12, 1438. https://doi.org/10.1038/s41598-022-05325-5 (2022).
Blumenfeld, N. R. et al. Multiplexed reverse-transcriptase quantitative polymerase chain reaction using plasmonic nanoparticles for point-of-care COVID-19 diagnosis. Nat. Nanotechnol. 17(9), 984–992 (2022).
Wu, Z. & McGoogan, J. M. Characteristics of and important lessons from the coronavirus disease 2019 (COVID-19) outbreak in china: summary of a report of 72 314 cases from the chinese center for disease control and prevention. JAMA 323, 1239–1242. https://doi.org/10.1001/jama.2020.2648 (2020).
Sun, Z. & Ostrikov, K. Future antiviral surfaces: Lessons from COVID-19 pandemic. Sustain. Mater. Technol. 25, e00203. https://doi.org/10.1016/j.susmat.2020.e00203 (2020).
Lauer, S. A. et al. The incubation period of coronavirus disease 2019 (COVID-19) from publicly reported confirmed cases: Estimation and application. Ann. Intern. Med. 172, 577–582. https://doi.org/10.7326/M20-0504 (2020).
Han, H. et al. Rapid field determination of SARS-CoV-2 by a colorimetric and fluorescent dual-functional lateral flow immunoassay biosensor. Sens. Actuators B Chem. 351, 130897. https://doi.org/10.1016/j.snb.2021.130897 (2022).
Song, Y. et al. SARS-CoV-2 induced diarrhoea as onset symptom in patient with COVID-19. Gut 69, 1143–1144 (2020).
Akbariqomi, M. et al. Clinical characteristics and outcome of hospitalized COVID-19 patients with diabetes: A single-center, retrospective study in Iran. Diabetes Res. Clin. Pract. 169, 108467. https://doi.org/10.1016/j.diabres.2020.108467 (2020).
Pan, Y. et al. Serological immunochromatographic approach in diagnosis with SARS-CoV-2 infected COVID-19 patients. J. Infect. 81(1), e28–e32 (2020).
Wang, Y., Kang, H., Liu, X. & Tong, Z. Combination of RT-qPCR testing and clinical features for diagnosis of COVID-19 facilitates management of SARS-CoV-2 outbreak. J. Med. Virol. 92, 538–539 (2020).
Hussein, H. A., Hassan, R. Y., Chino, M. & Febbraio, F. Point-of-care diagnostics of COVID-19: From current work to future perspectives. Sensors 20, 4289 (2020).
Black, A., MacCannell, D. R., Sibley, T. R. & Bedford, T. T. recommendations for supporting open pathogen genomic analysis in public health. Nat. Med. 26(6), 832–841 (2020).
Risitano, A. M. et al. Complement as a target in COVID-19?. Nat. Rev. Immunol. 20, 343–344 (2020).
Moreno, N., Moreno-Chaparro, D., Usabiaga, F. B. & Ellero, M. Hydrodynamics of spike proteins dictate a transport-affinity competition for SARS-CoV-2 and other enveloped viruses. Sci. Rep. 12, 11080. https://doi.org/10.1038/s41598-022-14884-6 (2022).
Nguyen, D. K. & Jang, C.-H. Ultrasensitive colorimetric detection of amoxicillin based on Tris-HCl-induced aggregation of gold nanoparticles. Anal. Biochem. 645, 114634. https://doi.org/10.1016/j.ab.2022.114634 (2022).
Mohammadian, N. & Faridbod, F. ALS genosensing using DNA-hybridization electrochemical biosensor based on label-free immobilization of ssDNA on Sm2O3 NPs-rGO/PANI composite. Sens. Actuators B Chem. 275, 432–438 (2018).
Zhao, W.-W., Xu, J.-J. & Chen, H.-Y. Photoelectrochemical DNA biosensors. Chem. Rev. 114, 7421–7441 (2014).
Aramesh, M. et al. Ultra-high-density 3D DNA arrays within nanoporous biocompatible membranes for single-molecule-level detection and purification of circulating nucleic acids. Nanoscale 7, 5998–6006 (2015).
Pourhajibagher, M., Etemad-Moghadam, S., Alaeddini, M., Miri Mousavi, R. S. & Bahador, A. DNA-aptamer-nanographene oxide as a targeted bio-theragnostic system in antimicrobial photodynamic therapy against Porphyromonas gingivalis. Sci. Rep. 12, 12161. https://doi.org/10.1038/s41598-022-16310-3 (2022).
Guoshuai, J. et al. A rapid and high sensitivity RNA detection based on NASBA and G4-ThT fluorescent biosensor. Sci. Rep. 12, 10076. https://doi.org/10.1038/s41598-022-14107-y (2022).
Fang, L. et al. Direct electrochemistry of glucose oxidase immobilized on Au nanoparticles-functionalized 3D hierarchically ZnO nanostructures and its application to bioelectrochemical glucose sensor. Sens. Actuators B Chem. 222, 1096–1102 (2016).
Pakapongpan, S. & Poo-Arporn, R. P. Self-assembly of glucose oxidase on reduced graphene oxide-magnetic nanoparticles nanocomposite-based direct electrochemistry for reagentless glucose biosensor. Mater. Sci. Eng., C 76, 398–405 (2017).
Liu, B. & Liu, J. Interface-driven hybrid materials based on DNA-functionalized gold nanoparticles. Matter 1, 825–847 (2019).
Wang, Y. et al. 3D printing biocompatible l-Arg/GNPs/PLA nanocomposites with enhanced mechanical property and thermal stability. J. Mater. Sci. 55, 5064–5078 (2020).
Salahandish, R., Ghaffarinejad, A., Naghib, S. M., Majidzadeh-A, K. & Sanati-Nezhad, A. A novel graphene-grafted gold nanoparticles composite for highly sensitive electrochemical biosensing. IEEE Sens. J. 18, 2513–2519 (2018).
Balakumar, V., Kim, H., Ryu, J. W., Manivannan, R. & Son, Y.-A. Uniform assembly of gold nanoparticles on s-doped g-c3n4 nanocomposite for effective conversion of 4-nitrophenol by catalytic reduction. J. Mater. Sci. Technol. 40, 176–184 (2020).
He, Y. et al. Regulatory mechanism of localized surface plasmon resonance based on gold nanoparticles-coated paclitaxel nanoliposomes and their antitumor efficacy. ACS Sustain. Chem. Eng. 6, 13543–13550 (2018).
Li, L. et al. Largely enhanced near band edge emission of ultrathin zinc oxide nanowire/gold nanoparticles composites by surface plasmon resonance. Appl. Surf. Sci. 433, 1154–1157 (2018).
Ghorbanzadeh, N., Peymani, A. & Ahmadpour-Yazdi, H. Colorimetric-based detection of Ureaplasma urealyticum using gold nanoparticles. IET Nanobiotechnol. 14, 19–24 (2019).
Priyadarshini, E. & Pradhan, N. Gold nanoparticles as efficient sensors in colorimetric detection of toxic metal ions: A review. Sens. Actuators, B Chem. 238, 888–902 (2017).
Liu, J. et al. Highly sensitive colorimetric detection of 17β-estradiol using split DNA aptamers immobilized on unmodified gold nanoparticles. Sci. Rep. 4, 7571. https://doi.org/10.1038/srep07571 (2014).
Yuan, X., Zhou, B., Li, M., Shen, M. & Shi, X. Colorimetric detection of Cr3+ ions in aqueous solution using poly (γ-glutamic acid)-stabilized gold nanoparticles. Anal. Methods 12(24), 3145–3150 (2020).
Wei, W., Wang, L., Huang, Q. & Li, T. Controlled synthesis of biocompatible rGO@ CD@ Au nanocomposites for trace detection for doxorubicin by Raman imaging spectroscopy. J. Alloy. Compd. 783, 37–43 (2019).
Seo, D. H. et al. Single-step ambient-air synthesis of graphene from renewable precursors as electrochemical genosensor. Nat. Commun. 8, 14217. https://doi.org/10.1038/ncomms14217 (2017).
Oliveira, J. P. et al. Impact of conjugation strategies for targeting of antibodies in gold nanoparticles for ultrasensitive detection of 17β-estradiol. Sci. Rep. 9, 13859. https://doi.org/10.1038/s41598-019-50424-5 (2019).
Khalil, I. et al. Graphene oxide and gold nanoparticle based dual platform with short DNA probe for the PCR free DNA biosensing using surface-enhanced Raman scattering. Biosens. Bioelectron. 131, 214–223. https://doi.org/10.1016/j.bios.2019.02.028 (2019).
Bellino, M. G., Calvo, E. J. & Gordillo, G. Adsorption kinetics of charged thiols on gold nanoparticles. Phys. Chem. Chem. Phys. 6, 424–428 (2004).
Csaki, A., Möller, R., Straube, W., Köhler, J. & Fritzsche, W. DNA monolayer on gold substrates characterized by nanoparticle labeling and scanning force microscopy. Nucl. Acids Res. 29, e81–e81 (2001).
Niu, Z. et al. Colorimetric detection of sulfamethazine based on target resolved calixarene derivative stabilized gold nanoparticles aggregation. Mikrochim Acta 189, 71. https://doi.org/10.1007/s00604-022-05176-x (2022).
Fan, Z. et al. Entropy-driven amplified electrochemiluminescence biosensor for RdRp gene of SARS-CoV-2 detection with self-assembled DNA tetrahedron scaffolds. Biosens. Bioelectron. 178, 113015. https://doi.org/10.1016/j.bios.2021.113015 (2021).
Hwang, C. et al. Ultra-fast and recyclable DNA biosensor for point-of-care detection of SARS-CoV-2 (COVID-19). Biosens. Bioelectron. 185, 113177. https://doi.org/10.1016/j.bios.2021.113177 (2021).
Zhang, K., Fan, Z., Ding, Y. & Xie, M. A pH-engineering regenerative DNA tetrahedron ECL biosensor for the assay of SARS-CoV-2 RdRp gene based on CRISPR/Cas12a trans-activity. Chem. Eng. J. 429, 132472. https://doi.org/10.1016/j.cej.2021.132472 (2022).
Kashefi-Kheyrabadi, L. et al. Rapid, multiplexed, and nucleic acid amplification-free detection of SARS-CoV-2 RNA using an electrochemical biosensor. Biosens. Bioelectron. 195, 113649. https://doi.org/10.1016/j.bios.2021.113649 (2022).
Karakuş, E., Erdemir, E., Demirbilek, N. & Liv, L. Colorimetric and electrochemical detection of SARS-CoV-2 spike antigen with a gold nanoparticle-based biosensor. Anal. Chim. Acta 1182, 338939. https://doi.org/10.1016/j.aca.2021.338939 (2021).
SARS-CoV-2 Variant Classifications and Definitions, <https://www.cdc.gov/coronavirus/2019-ncov/variants/variant-info.html> (2021).
Campbell, F. et al. Increased transmissibility and global spread of SARS-CoV-2 variants of concern as at June 2021. Euro Surveill. https://doi.org/10.2807/1560-7917.Es.2021.26.24.2100509 (2021).
Quintero-Jaime, A. F., Conzuelo, F., Cazorla-Amorós, D. & Morallón, E. Pyrroloquinoline quinone-dependent glucose dehydrogenase bioelectrodes based on one-step electrochemical entrapment over single-wall carbon nanotubes. Talanta 232, 122386. https://doi.org/10.1016/j.talanta.2021.122386 (2021).
Mansouri, N., Babadi, A. A., Bagheri, S. & Abd Hamid, S. B. Immobilization of glucose oxidase on 3D graphene thin film: Novel glucose bioanalytical sensing platform. Int. J. Hydrog. Energy 42, 1337–1343 (2017).
Wang, L., Liu, X., Hu, X., Song, S. & Fan, C. Unmodified gold nanoparticles as a colorimetric probe for potassium DNA aptamers. Chem. Commun. 36, 3780–3782 (2006).
Khalil, I. et al. Dual platform based sandwich assay surface-enhanced Raman scattering DNA biosensor for the sensitive detection of food adulteration. Analyst 145, 1414–1426 (2020).
Goncalves, G. et al. Surface modification of graphene nanosheets with gold nanoparticles: the role of oxygen moieties at graphene surface on gold nucleation and growth. Chem. Mater. 21, 4796–4802 (2009).
Baghayeri, M. et al. A non-enzymatic hydrogen peroxide sensor based on dendrimer functionalized magnetic graphene oxide decorated with palladium nanoparticles. Appl. Surf. Sci. 478, 87–93 (2019).
Zhu, J. et al. A highly sensitive biosensor based on Au NPs/rGO-PAMAM-Fc nanomaterials for detection of cholesterol. Int. J. Nanomed. 14, 835 (2019).
Shih, W.-C., Zhao, F. & Arnob, M. in 2018 IEEE 18th International Conference on Nanotechnology (IEEE-NANO). 1–4 (IEEE).
Acknowledgements
The authors very much appreciate the infrastructure and support of the Iran Presidential Special Headquarters for Nano Development and Tehran University of Medical Sciences staff and members who supported and assisted us in this research during the time of quarantine. This research was funded by Iran Nanotechnology Innovation Council grant 99/11/79/2744 (AAB, GT). This work was partially supported by the Centre for Materials Science and the Centre for Biomedical Technologies of QUT.
Author information
Authors and Affiliations
Contributions
Conceptualization: A.A.B., S.R., R.F., R.H.; Conducted the experiment: A.A.B., R.F., R.H., M.A.; Methodology: G.T., A.A.B., S.R., M.A., S.W.; Investigation: A.A.B., R.H., M.A., S.R., S.B.; Visualization: A.A.B., R.F., S.R.; Data Curation: A.A.B., R.A., G.T.; Funding acquisition: G.T., A.A.B.; Project administration: G.T., A.A.B.; Supervision: G.T., S.W., W.D., K.K.O.; Writing – original draft: A.A.B., R.F., S.R.; All authors reviewed the manuscript.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Publisher's note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary Information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Babadi, A.A., Rahmati, S., Fakhlaei, R. et al. SARS-CoV-2 detection by targeting four loci of viral genome using graphene oxide and gold nanoparticle DNA biosensor. Sci Rep 12, 19416 (2022). https://doi.org/10.1038/s41598-022-23996-y
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-022-23996-y
- Springer Nature Limited