Abstract
In many extreme arid ecosystems, insects constitute major faunal components and are key contributors in nutrient cycling. Previous research on xerophily in insects has focused on adult forms. This study investigates skeletomuscular and behavioural adaptations of the Kalahari sandworm beetle larvae (Gonopus tibialis Fabricius) for dwelling in the sand. Microcomputed tomography enabled cuticle thickness distribution analysis, revealing structural reinforcements of the mandibular edge, the middle part of the head, and the ventral side of the front legs. Laboratory observations and the analysis of muscular system allowed for the definition and functional description of the elements of the digging apparatus of the sandworm larvae. Obtained results point to the crucial role of the head and mandibles in the digging process. These observations are important for understanding desert ecology and pose a challenge to develop newer excavation techniques.
Similar content being viewed by others
Introduction
With over 30,000 species darkling beetles (Tenebrionidae Latreille) are one of the most taxonomically diverse beetle families1,2,3. Although they can be found in a variety of different habitats (e.g. steppes, temperate and rain forests, ants/termite nets), the family is primarily known for a xerophilous lifestyle of many of its representatives4. In several extremely arid ecosystems, such as the Atacama, Namib, or Kalahari deserts, darkling beetles constitute a major component of the arthropod fauna and are a key element in nutrient cycling1,5,6,7,8,9,10. The extreme xerophily of tenebrionids has fascinated researchers from a wide variety of fields. As a result species such as the Namibian fog basking beetle (Onymacris unguicularis Haag) have been incorporated into biology-inspired engineering projects seeking solutions for efficient cooling and hydration systems11,12. Nevertheless, available studies on this matter are often taxonomically restricted leaving the dazzling potential of darkling beetles largely untouched—especially in the context of larval behaviour and ecology.
Considering the entire taxonomic diversity of Tenebrionidae, the majority of species probably have detritivorous, soil-dwelling larvae1. Particular adaptations to this lifestyle have never been closely studied. However, some morphological convergences were reported between relatively distant psammophilous phylogenetic groups13,14,15. For instance, the larvae of the subfamily Blaptinae Leach and some tribes within Pimeliinae Latreille are characterized by enlarged front legs16,17,18. Although representatives of those groups are often sympatric in arid and sandy habitats19, available molecular data suggest these lineages diverged over 150 Ma20. Except for the enlargement of prolegs, which presumably are adapted for digging in the sand13, not much is known about the strategies used by the larvae of different tenebrionid species to thrive in desert ecosystems. This concerns basic issues such as the movement style, not to mention specific skeletal and muscular adaptations.
The lack of studies on the larval adaptations in darkling beetles is mainly caused by the scarcity of available larval descriptions in general. The morphology of immature stages is known only for 2–8% of the described species, while only a fraction of these contributions provide any type of data on the lifestyle of the studied taxa21,22. In this context, the sandworm beetle [Gonopus tibialis (Fabricius)] and the subsocial desert beetle [Parastizopus armaticeps (Péringuey)] are exceptional, as their biology is relatively well understood23,24,25,26. Additionally, both species occur sympatrically on the sand dunes of the Kalahari Desert27,28. The adult forms in both cases are nocturnal fossorial detritivores that shelter in burrows during the daytime24. Although the lifestyle of the imaginal forms seems to be highly convergent, both taxa use different larval strategies. The larvae of the sandworm beetle simply dwell in the sand in search of food and suitable conditions, while those of the subsocial desert beetle inhabit burrows made by adults, which also feed and care for them29,30,31. Preimaginal stages of P. armaticeps do not dig or construct burrows themselves; however, they can move from burrow to burrow by following the adults. Furthermore, unlike the sandworm beetle, the pupating larvae of this species spin silk cocoons directly within the burrows30,32.
Because both above-mentioned species are sympatric, represent a single tenebrionid subfamily (Blaptinae), and their phylogenetic position is well established15, they constitute an interesting model for investigating larval adaptations to thrive in desert ecosystems. This study employs a variety of methods, including microcomputed tomography (micro-CT) to investigate the skeletomuscular adaptations of the sandworm beetle larvae for dwelling in the sand.
Materials and methods
Insects
This study focuses on analyzing the larvae of the sandworm beetle (Gonopus tibialis). However, two other tenebrionid species, subsocial desert beetle (Parastizopus armaticeps) and mealworm beetle (Tenebrio molitor L.) were used for reference. Both, G. tibialis and P. armaticeps belong to the same subfamily of darkling beetles (Blaptinae) representing two closely related tribes—Platynotini Mulsant & Rey and Opatrini Brullé respectively15. Unlike the preceding species, the mealworm beetle is classified within Tenebrioninae3. This species is a commonly used model organism for various types of biological studies33,34,35,36,37,38,39. In nature, mealworms inhabit decaying wood of different deciduous tree species in the temperate zone where they forage and feed on fungi, frass, and dead arthropods40.
The larvae of sandworm and subsocial beetles were obtained in rearing experiments from adults collected at the Kuzikus Wildlife Reserve in Namibia (coll. permit number 1738/2012), while individuals of T. molitor were commercially purchased. All investigations were based on the last larval instar. Detailed morphological descriptions of the larval stages of the Kalahari and subsocial beetles were published by Schulze29,41. Morphological nomenclature for skeletal structures follows that of Lawrence et al.42,43 and Beutel & Friedrich44. Muscular terminology was adopted after Fredrich and Beutel45, Beutel et al.46, and Aibecova et al.47. Images of selected morphological features were taken with a Hitachi S-3400N SEM.
Observation of burrowing
Films depicting head and leg movements of sandworm beetle larvae were made using a SkyScan 1172 micro-CT system (see below) and a digital camera (Canon EOS D6 mark II with Tamron 90 mm lens). For movement analysis using the micro-CT, larvae were placed in pipette tips and a series of images were made. Subsequently, photos were assembled into a movie (Fig. 1a, Supplement 148). The tip of the pipette simulated the passage in which the larvae move. For movement analysis carried out using a digital camera, larvae were placed on a Petri dish with sand on it. The camera was installed beneath this stage. The resulting movies display the movement of larvae beneath the sand (Fig. 1c,d, Supplement 248). All experiments were conducted at room temperature, without specific humidity modifications. Altogether, over 45 min of footage for 13 sandworm beetles were recorded and analysed. The same experiments were conducted with mealworms in order to verify if digging strategies of different tenebrionid larvae are convergent. As larvae of the subsocial beetle do not dig directly in the soil they were not subjected to this type of experiment.
Micro-CT analysis
Analyses were performed using a SkyScan 1172 system49. Before scanning specimens underwent the following preparation process: fixation in 4% buffered formaldehyde with 2% glutaraldehyde, desiccation through 30, 50, 70, and 96% ethanol (each for about one day). Subsequently studied samples were dried in a critical point dryer. All specimens were scanned with the lamp set to voltage 40 kV and current to 250 μA with matrix resolution set for 4000 × 4000 pixels. As a result, the following pixel sizes were obtained: 2.71 μm for the sandworm beetle, 3.86 μm for the subsocial beetle, and 3.06 μm for the mealworm. Segmentation was performed in CTAn Brucker (version 1.18.4.0 +), while visualizations and renders in Blender (version 3.0.0). Analysis of cuticle thickness was carried out in the CTAn. For this analysis, all appendages of the head (e.g., antennae, maxillary palpi) were digitally removed (Fig. 2b). All raw micro-CT datasets are accessible from the Harvard Dataverse repository (Supplement 3–548). As no substantial differences in morphology were observed between the legs and mandibles of both body sides, measurements (volume, thickness) were taken from the right side of the studied specimens.
Statistical analysis
All statistical analyses and charts were made in the R environment (version 4.0.250). To evaluate the differences in cuticle thickness distribution between the studied species, obtained data were normalized by using the values width of the head capsule (Supplement 648). Differences were evaluated with a non-parametric, two-sample Kolmogorov–Smirnov test procedure51. P-value of less than 0.05 to be a statistical significance.
Results
Digging movements
When tunnelling straight, the larval legs of particular thoracic segments are moving symmetrically. The forward motion of the larva is initiated by the hind legs, which are moved back from the level of the second thoracic segment all the way to the base of the third. During this phase, the head is retracted, while its dorsal surface pushes against the sand. The first pair of legs is hidden underneath the head, pointing anteriorly (Fig. 1c). While the legs of the third pair are moved backward, the second pair is moving forward. Their contact with sand, and the beginning of reverse motion, are initiated once the third pair of legs reaches its maximum extension. Similarly, once the midlegs reach their maximum amplitude, the front legs are tilted, providing support for the straightening of the head, which is the main digging element (Fig. 1a). Larval tunnels are mainly formed by head movements. In particular, the dorsal surface is compressing the sand in the upper part of the tunnel profile (Fig. 1d). Conducted observations suggest that legs are not directly involved in digging or even moving the sand backward, but rather drive the forward motion of the larva (middle and hindlegs) and actively support the digging motion of the head (front legs). When fully extended forwards, the front legs are not exceeding beyond the ventral outline of the head (Fig. 1b). Furthermore, the presence of the abdomen inhibits any direct involvement of the legs in the sand removal process (Fig. 1e,f). When exposed to the experimental conditions, mealworms displayed fully convergent digging behaviours.
Digging apparatus
Observations described above resulted in the identification of the basic elements of the digging apparatus of the sandworm beetle larva. The morphological specification of these elements is provided below.
Head
Sandworms are characterized by the absence of eyes (Fig. 1b). Within the set of investigated species, the lack of ocelli has also been reported in the case of the subsocial desert beetle. Eyes are clearly detectable in the case of the mealworm beetle. When compared to reference taxa the sandworm beetle is the only species in which the head capsule is subequal to the pronotum in width (head\pronotum width ratio: G. tibilis = 0.98–0.99, P. armaticeps = 0.66–0.77, T. molitor = 0.78–0.82). Furthermore, the mandibles of this species are uniquely expanded laterally creating a relatively large surface that can shield the antenne dorsally once the mandibles are opened (Fig. 2c). The cuticle of mandibles in the scanned individual of the sandworm beetle has a surface of 11.11 mm2 and a volume of 0.25 mm3 (ratio = 44.4). Corresponding values measured for the subsocial desert beetle are as follows: 5.46 mm2 and 0.07 mm3 (ratio = 75.6). Finally, for the mealworm beetle: 3.19mm2, 0.05 mm3 (ratio = 56.9).
Legs
The prothoracic legs of the sandworm beetle species are noticeably enlarged (Fig. 2j). The combined length of pretarsus and tibiotarsus is over two times greater than that of the corresponding morphological elements of hind legs (Fig. 2j). Contrarily, in the case of the employed reference species, the front legs are only slightly enlarged (length ratio of fore/hind pretarsus + tibiotarsus = 1.4–1.5). The sandworm beetle is the only one within the studied species to possess tuberculation on the front legs (Fig. 2j). Moreover, the propretarsus of this species is uniquely flattened (Fig. 2i,j). The cuticle of the forelegs in the scanned individual of the sandworm beetle has a surface of 42.04 mm2 and a volume of 0.62 mm3 (ratio = 67.81). Corresponding values measured for the subsocial desert beetle are as follows: 14.59 mm2 and 0.09 mm3 (ratio = 162.1). Finally, for the mealworm beetle: 10.13 mm2, 0.07 mm3 (ratio = 144.7). The propretarsus in the sandworm beetle is about as long as the protibiotarsus (Fig. 2h,j). It is convex dorsally, while ventrally flat, and possesses a rounded apex (Fig. 2i). In contrast, the propretarsus of the subsocial beetle is almost two times shorter than the tibiotarsus. It has a pointed tip, while the ventral surface is convex. SimilarlyInthe protibiotarsus of the mealworm is almost twice as long as the propretarsus.
Thickness analysis
The following section presents the results of the cuticle thickness analysis conducted for the selected elements of the digging apparatus of the sandworm.
Head
The cuticle of the dorsal side of the head capsule of the sandworm beetle is noticeably thicker than that of the two reference species (Fig. 2a,b). However, it should be noted that the larvae of this species are on average larger than those of the other species. Nevertheless, the thickness distribution in the case of the sandworm beetle noticeably shifted towards the higher values (Fig. 2b). This difference was statistically significant (G. tibialis—P. armaticeps: D = 0.40, P < 0.01; G. tibialis—T. molitor: D = 0.25, P < 0.001). In the case of that species, the most frequent value (mode) is 81.0 ± 3.0 μm (12.73%), while in the mealworm 49.0 ± 3.0 μm (19.0%), and finally in the subsocial desert beetle 23.0 ± 4.0 μm (39.78%). Recorded mean values of cuticle thickness for these species were 81.0 μm, 79.0 μm, and 35.0 μm respectively. Cuticle with thickness below mode values constitutes around 67.7% of the total volume of the head capsule in the sandworm beetle, 29.5% in mealworm, and 35.8% in the subsocial beetle.
The thickest element (over 120.0 μm) occurring on the head capsule of the sandworm beetle is the frontoclypeal suture and its extension along the front edge of the gena over the antennal insertions (Fig. 2b). The thickness of the frons and dorsal parts of the gene is also relatively high and ranges between 50.0 to 100.0 μm. A thick cuticle is also present in the lateral margins and base of the clypeus (75.9 μm), lateral edges of the labrum (65.1 μm), and the rod running across its entire width at its center (65.1 μm). The thickness of the ventral side of the head of sandworm beetles did not exceed 50.0 μm. The only thickened elements form a ridge on the border of the gulamentum (Fig. 2b). The thickening of the gulamentum forms the base for the posterior tentorial arms.
Imaging of the cuticle thickness distribution revealed the subsocial beetle differs mainly by the lack of reinforcement of the mid part of the ventral side of the head (Fig. 2b). Thickened elements (> 20.0 μm) of this side of the head occur around the antennal insertions and run along the frontoclypeal suture (Fig. 2b). The clypeus itself is only slightly thicker and the labrum is built from a cuticle of a relatively low thickness (< 20.0 μm). On the ventral part of the head capsule, the cuticle is reinforced in the maxillary fossa (Fig. 2b). Similarly, the mid part of the ventral side of the head of the mealworm beetle is also not reinforced (Fig. 2b), while the differences in cuticle thickness between the ventral and dorsal sides of the capsule are less highlighted than in the case of the sandworm beetle. In general, cuticle thickness distribution for ventral sides of the head are highly convergent among all studied species (Fig. 2b).
Mandibles
Thickness distribution is similar in all studied species, and the highest percentage of cuticle has an intermediate thickness (Fig. 2d,e). The most abundant chitin in the sandworm beetle (12.04%) has a thickness of 59.0 ± 3.0 μm, while in the mealworm (15.84%) 49.0 ± 3.0 μm, and 38.0 ± 4.0 μm (28.96%) in the case of the subsocial desert beetle.
In the sandworm beetle the anterior and external mandible edge, apical teeth, molar lobe, articulatory condyles, and posterior edge of mola are the thickest elements (> 100.0 μm). The reinforcement of the outer mandibular edge is characteristic for this species when compared to the referencs (Fig. 2e). On the other hand, it can be concluded that the thickening of the inner mandibular edge is common for all of the studied species.
Front legs
Thickness distribution charts in the case of the subsocial desert beetle and mealworm are skewed towards lower values (Fig. 2g,h). A relatively thin cuticle (11.0–19.0 μm and 21.0–27.0 μm respectively) represents 60.80% of the total volume of the cuticle in the subsocial beetle and 31.91% in the mealworm. In the case of the sandworm beetle, the most abundant chitin (14.90%) has a thickness of 43.0 ± 3.0 μm. In this species, the thickest noted element has 124.0 ± 3.0 μm, compared to 97.0 ± 3.0 μm in the mealworm, and 61.0 ± 4.0 μm in the subsocial beetle.
The thickest cuticle (> 100.0 μm) in the case of the sandworm beetle occurs in the ventral and anterior parts of the coxa, trochanter, and femur. The thickening of the cuticle can also be observed on the ventral edge of the pretarsus. In both, the subsocial beetle and mealworm only the apex of the pretarsungulus and minor parts around the coxal base and coxo-trochanteral articulation possess thickened cuticle (Fig. 2h).
Musculature
The following section describes the musculature of the digging apparatus of the sandworms.
Head
The head movements are operated by seven double muscles (Table 1). Three of them enable the uplift of the head, and with a total volume of 0.43 mm3, they constitute the largest muscle group involved in head movements (Table 1, Fig. 3a,b). The three antagonistic muscles have a total volume of 0.18 mm3. Lateral movements of the head are carried out by a single muscle, which has a volume of 0.17 mm3 (Table 1).
Mandibles
Mandibular movements are operated by a pair of antagonistic muscles (Table 1). With a volume of 0.69 mm3, the adductor (m. craniomandibularis internus) constitutes the single largest muscle occurring within the head. The abductor (m. craniomandibularis externus) is much smaller and has a volume of 0.08 mm3.
Front legs
Altogether, 17 muscles were identified within the front leg of the sandworm beetle larva (Table 1, Fig. 3c–e). With a volume of 0.47 mm3, the muscles moving the coxa constitute the largest group, which is followed by the muscles of the trochanter (0.17 mm3). The muscles of the other leg segments have noticeably lower volumes, i.e. femur—0.02 mm3, tibiotarsus—0.03 mm3, and pretarsus—0.04 mm3.
Discussion
Previously, several studies have investigated physiological, behavioral, and anatomical adaptations of different insect groups to arid environments. Nevertheless, the majority of these contributions concerned the adult epigeic forms. In this context, the most commonly mentioned adaptations of desert inhabiting beetles are the specific structuring of the elytra52,53,54,55, the phenomenon of fog basking11, the longevity of the adult forms7,56,57, the morphological modifications of the legs to the psammophilous way of life13, the reduction in egg production58,59, and modifications of circadian rhythms60,61,62. Data on larval adaptations are scarce and extremely general in their nature. It has been mentioned that larvae of some of the desert inhabiting tenebrionids bury themselves in the sand to avoid overheating52, and in the case of some species a rapid larval development following the rain season has been observed63. The scarcity of available information in this context is surprising as larval traits can determine the fitness of adult forms64,65,66, and therefore constitutes an important element for the functioning of a given ecosystem.
Our data revealed that the head is the main digging element, while the enlarged front legs constitute support for its up and down movements (Fig. 1). Analysis of chitin thickness distribution revealed key differences between the sandworm beetle and two reference taxa. Namely, the sand-dwelling larva of G. tibialis possesses unique sclerotizations of the outer edge of the mandibles and the center of frons (Fig. 2b,e). Furthermore, the dorsal surface of mandibles is flattened and extended sideways, providing a larger digging surface (Fig. 2f). The crucial role of the head in the digging process is also highlighted by the musculature, as the group of muscles responsible for the up motion of the head is significantly larger than the antagonistic one (Table 1). Taking into consideration data obtained during the observations it can be concluded that modifications of the front legs of sandworm beetle larva (presence of tubercles, reinforcement of coxal and trochanter chitin, flat pretarsus; Fig. 2) enable them to more firmly move through the sand.
Surprisingly, when buried in the sand, mealworms displayed identical digging behavior to the larvae of the sandworm beetle. This observation suggests that such a digging strategy might be omnipresent within the family of darkling beetles. Tenebrionid larvae—sometimes referred to as the false wireworms—are prone to homoplasy in their morphology22,67. Therefore, this generalistic digging strategy might enable different tenebrionid species to thrive in a wide variety of habitats, such as decaying wood, soil, or sand1. The majority of diagnostic features used in false wireworm descriptions concern the mouthparts and the pygydium21,67,68,69,70,71. Aside from the afore mentioned enlargement of the front legs no apparent modifications to the psammophilous lifestyle were ever listed.
Conclusion
Our study shows that μCT-based thickness distribution analysis is a reliable tool for investigating particular adaptation problems within different insect groups. Specifically, our data revealed the following unique features of sand-digging tenebrionid larvae: thickening and extension of the dorsal surface of mandibles and extention of the inner side of protarsungulus, cuticle reinforcements on the outer mandibular edge, the middle part of the head, and the ventral side of front legs. Our observations also highlight the essential role of the head capsule and mandibles in the digging process.
Data availability
All supplementary data are available at Harvard Dataverse (https://doi.org/10.7910/DVN/NNAETE).
References
Matthews, E. G., Lawrence, J. F., Bouchard, P., Steiner, W. E. Jr. & Ślipiński, S. A. Tenebrionidae Latreille, 1802. In Handbook of Zoology. A Natural History of the Phyla of the Animal Kingdom. Vol. IV—Arthropoda: Insecta. Part 38 Coleoptera, Beetles. Vol. 2: Systematics (Part 2) (eds Leschen, R. A. B. et al.) 574–659 (Walter de Gruyter GmbH & Co, 2010).
Kergoat, G. J. et al. Higher-level molecular phylogeny of darkling beetles (Coleoptera: Tenebrionidae). Syst. Entomol. 39, 486–499. https://doi.org/10.1111/syen.12065 (2014).
Bouchard, P. et al. Review of genus-group names in the family Tenebrionidae (Insecta, Coleoptera). Zookeys 26, 1–633. https://doi.org/10.3897/zookeys.1050.64217 (2021).
Matthews, E. G. & Bouchard, P. Tenebrionid Beetles of Australia 398 (Australian Biological Resources Study, 2008).
Thomas, D. B. J. R. Patterns in the abundance of some tenebrionid beetles in the Mojave Desert. Environ. Entomol. 8, 568–657 (1979).
Seely, M. K. & Louw, G. N. First approximation of the effects of rainfall on the ecology and energetics of a Namib Desert dune ecosystem. J. Arid Environ. 3, 25–54 (1980).
Crawford, C. S. The community ecology of macroarthropod detritivores. In The Ecology of Desert Communities (ed. Polis, G. A.) 89–112 (The University of Arizona Press, 1991).
Mordkovich, V. G. Species richness, population structure and functional significance of black-beetles (Coleoptera: Tenebrionidae) in steppes of Northern Asia. Russ. Entomol. J. 11, 57–68 (2002).
Bartholomew, A. & El Moghrabi, J. Seasonal preference of darkling beetles (Tenebrionidae) for shrub vegetation due to high temperatures, not predation or food availability. J. Arid Environ. 156, 34–40 (2018).
Cheli, G. H., Bosco, T. & Flores, G. The role of Nyctelia dorsata Fairmaire, 1905 (Coleoptera: Tenebrionidae) on litter fragmentation processes and soil biogeochemical cycles in arid Patagonia. Ann. Zool. 72, 129–134. https://doi.org/10.3161/00034541ANZ2022.72.1.011 (2022).
Nørgaard, T. & Dacke, M. Fog-basking behaviour and water collection efficiency in Namib Desert Darkling beetles. Front. Zool. 7, 23. https://doi.org/10.1186/1742-9994-7-23 (2010).
Comanns, P. Passive water collection with the integument: Mechanisms and their biomimetic potential. J. Exp. Biol. 221, jeb153130. https://doi.org/10.1242/jeb.153130 (2018).
Doyen, J. T. Familial and subfamilial classification of the Tenebrionoidea (Coleoptera) and a revised generic classification of the Coniontini (Tentyriidae). Quest. Entomol. 8, 357–376 (1972).
Schulze, L. The Tenebrionidae of Southern Africa. XLII. Description of the early stages of Carchares macer Pascoe and Herpiscus sommeri Solier with a discussion of some phylogenetic aspects arising from the incongruities of adult and larval systematics. Sci. Pap. Namib Desert Res. Stn. 53, 139–149 (1969).
Kamiński, M. J. et al. Reevaluation of Blapimorpha and Opatrinae: Addressing a major phylogeny-classification gap in darkling beetles (Coleoptera: Tenebrionidae: Blaptinae). Syst. Entomol. 46, 140–156. https://doi.org/10.1111/syen.12453 (2021).
Skopin, N. G. [Larvae of the subfamily Pimeliinae (Coleoptera, Tenebrionidae)]. Lichinki podsemeystva Pimeliinae (Coleoptera, Tenebrionidae). Trudy Nauchno-Issledovatelskogo Instituta Zashchity Rastenii Kazakhstanskoy Akademii Selskokhozyastvennykh Nauk 7, 191–298 (1962).
Skopin, N. G. Die Larven der Tenebrioniden des Tribus Pycnocerini (Coleoptera, Heteromera). Ann. Museé R. l’Afrique Centrale 127, 1–35 (1964).
Iwan, D. & Bečvář, S. Description of the early stages of Anomalipus plebejus plebejulus (Coleoptera: Tenebrionidae) from Zimbabwe with notes on the classifcation of the Opatrinae. Eur. J. Entomol. 97, 403–412 (2000).
Koch, C. Monograph of the Tenebrionidae of southern Africa Vol I (Tentyriinae, Molurini Trachynotina: Somaticus Hope). Transvaal Mus. Mem. 7, 242 (1955).
Kergoat, G. J. Cretaceous environmental changes led to high extinction rates in a hyperdiverse beetle family. BMC Evol. Biol. 14, 220. https://doi.org/10.1186/s12862-014-0220-1 (2014).
Smith, A. D., Dornburg, R. & Wheeler, Q. D. Larvae of the genus Eleodes (Coleoptera, Tenebrionidae): Matrix-based descriptions, cladistic analysis, and key to late instars. Zookeys 415, 217–268 (2014).
Kamiński, M. J. et al. Immature stages of beetles representing the ‘Opatrinoid’ clade (Coleoptera: Tenebrionidae): An overview of current knowledge of the larval morphology and some resulting taxonomic notes on Blapstinina. Zoomorphology 138, 349–370. https://doi.org/10.1007/s00435-019-00443-7 (2019).
Rasa, O. A. E. Bechavioural adaptations to moisture as an environmental constraint in a nocturnal burrow-linhabiting Kalahari detritivore Parastizopus amraticpes Peringuey (Coleoptera: Tenebrionidae). Koedoe 37(1), 57–66 (1994).
Rasa, O. A. E. Ecological factors influencing burrow location, group size and mortality in a nocturnal fossorial Kalahari detritivore, Parastizopus armaticeps Peringuey (Coleoptera: Tenebrionidae). J. Arid Environ. 29, 353–365 (1995).
Fabricius, J. C. Supplementum Entomologia Systematica. (Impensis CG Proft, 1978).
Péringuey, L. Fourth contribution to the South African coleopterous fauna. Description of new Coleoptera in the South African Museum. Trans. S. Afr. Philos. Soc. 6, 95–136 (1892).
Endrody-Younga, S. A revision of the subtribe Gonopina (Coleoptera: Tenebrionidae: Opatrinae: Platynotini). Ann. Transvaal Mus. 37, 1–54 (2000).
Kamiński, M. J. Notes on species diversity patterns in Stizopina (Coleoptera: Tenebrionidae), with description of a new genus from Nama Karoo. Ann. Zool. 65, 131–148. https://doi.org/10.3161/00034541ANZ2015.65.2.002 (2015).
Schulze, L. The Tenebrionidae of Southern Africa. XXXVIII. On the morphology of the larvae of some Stizopina (Coleoptera: Opatrini). Sci. Pap. Namib Desert Res. Stn. 19, 1–23 (1963).
Schulze, L. A review of silk production and spinning activities in Arthropoda with special reference to spinning in Tenebrionid larvae (Coleoptera) and Brown, J. M. M.: A chromatographic analysis of Tenebrionid silk. Mem. Transvaal Mus. 51, 409–410 (1975).
Rasa, O. A. E. & Endrödy-Younga, S. Intergeneric associations of stizopinid tenebrionids relative to their geographical distribution (Coleoptera: Tenebrionidae: Opatrini: Stitzopina). Afr. Entomol. 5, 231–239 (1997).
Kamiński, M. J., Raś, M., Steiner, W. E. & Iwan, D. Immature stages of beetles representing the ‘Opatrinoid’ clade (Coleoptera: Tenebrionidae): An overview of current knowledge of the pupal morphology. Ann. Zool. 68, 825–836. https://doi.org/10.3161/00034541ANZ2018.68.4.006 (2018).
Doyen, J. T. The skeletal anatomy of Tenebrio molitor (Coleoptera: Tenebrionidae). Ann. Entomol. Soc. Am. 5, 103–150 (1966).
Ohde, T., Yaginuma, T. & Niimi, T. Insect morphological diversification through the modification of wing serial homologs. Science 340, 495 (2013).
Zhu, J. Y., Yang, P., Zhang, Z., Wu, G. X. & Yang, B. Transcriptomic immune response of Tenebrio molitor pupae to parasitization by Scleroderma guani. PLoS ONE 8, e54411 (2013).
Raś, M., Iwan, D. & Kamiński, M. J. Tracheal system in post-embryonic development of holometabolous insects: A case study using mealworm beetle. J. Anat. 232, 997–1015. https://doi.org/10.1111/joa.12808 (2018).
Kwon, G. T. et al. Mealworm larvae (Tenebrio molitor L.) exuviae as a novel prebiotic material for BALB/c mouse gut microbiota. Food Sci. Biotechnol. 29(4), 531–537. https://doi.org/10.1007/s10068-019-00699-1 (2019).
Machona, O., Chidzwondo, F. & Mangoyi, R. Tenebrio molitor: Possible source of polystyrene-degrading bacteria. BMC Biotechnol. 22, 2. https://doi.org/10.1186/s12896-021-00733-3 (2022).
Jösting, E. A. Die Innervierung des Skelettmuskelsystems des Mehlwurms (Tenebrio molitor L., Larve). Zool. Jb. Anat. 67, 381–460 (1942).
Burakowski, B., Mroczkowski, M. & Stefańska, J. Chrząszcze: Coleoptera. Cucujoidea, Część 3. Katalog Fauny Polski, XXIII, 14 (1987).
Schulze, L. The Tenebrionidae of southern Africa. XXXIII. Description of the larvae of Gonopus tibialis Fabricius and Gonopus agrestis Fahraeus (Gonopina, sensu Koch 1956). Cimbebasia 5, 1–12 (1962).
Lawrence, J. F., Pollock, D. A. & Ślipiński, A. Tenebrionoidea. In Handbook of Zoology. A Natural History of the Phyla of the Animal kingdom, Vol. IV. Arthropoda: Insecta (eds Leschen, R. A. B. et al.) 487–659 (Walter de Gruyter, 2010).
Lawrence, J. F. et al. Phylogeny of the Coleoptera based on morphological characters of adults and larvae. Ann. Zool. 61(1), 1–217 (2011).
Beutel, R. G. & Friedrich, F. Comparative study of larvae of Tenebrionoidea (Coleoptera: Cucujiformia). Eur. J. Entomol. 102, 241–264 (2005).
Fredrich, F. & Beutel, R. G. The thorax of Zorotypus (Hexapoda, Zoraptera) and a new nomenclature for the musculature of Neoptera. Arthropod Struct. Dev. 37, 29–54 (2008).
Beutel, R. G., Friedrich, F., Yang, X.-K. & Ge, S.-Q. Insect Morphology and Phylogeny: A Textbook for Students of Entomology 515 (Walter de Gruyter, 2014).
Aibekova, L. et al. The skeletomuscular system of the mesosoma of Formica rufa workers (Hymenoptera: Formicidae). Insect Syst. Divers. 6(2), 1–26. https://doi.org/10.1093/isd/ixac002 (2022).
Raś, M. Digging adaptations in psammophilous beetle larvae. Harvard Dataverse https://doi.org/10.7910/DVN/NNAETE (2022).
SkyScan. Method Notes, Skyscan 1172 Desktop Micro-CT (Skyscan, 2008).
R Core Team. 2020. R: A Language and Environment for Statistical Computing. (R Foundation for Statistical Computing, 2020) https://www.R-project.org/.
Sokal, R. R. & Rohlf, F. J. Biometry 937 (W.H. Freeman, 2011).
Cloudsley-Thompson, J. L. Terrestrial animals in dry heat: Arthropods. In Handbook of Physiology. Section 4: Adaptation to the Environment 414–436 (American Physiological Society, 1964).
Cloudsley-Thompson, J. L. Adaptations of Arthropoda to arid environments. Annu. Rev. Entomol. 20, 261–283. https://doi.org/10.1146/annurev.en.20.010175.001401 (1975).
Draney, M. L. The subelytral cavity of desert tenebrionids. Fla. Entomol. 76, 539–549 (1993).
Duncan, F. D. The role of the subelytral cavity in water loss in the flightless dung beetle, Circellium bacchus (Coleoptera: Scarabaeinae). Eur. J. Entomol. 99(2), 253–258. https://doi.org/10.14411/eje.2002.034 (2002).
Endrödy-Younga, S. & Tschinkel, W. Estimation of population size and dispersal in Anomalipus mastodon Fåhraeus, 1870 (Coleoptera: Tenebrionidae: Platynotini). Ann. Transvaal Mus. 36(4), 21–30 (1993).
Iwan, D. Insecta Coleoptera Tenebrionidae Pedinini Platynotina. Vol. 93 of Faune de Madagascar 178 (Editions Quae, 2010).
Wallwork, J. A. Desert Soil Fauna 296 (Praeger Publication, 1982).
Iwan, D. Oviviparity in tenebrionid beetles of the melanocratoid Platynotina (Coleoptera: Tenebrionidae: Platynotini) from Madagascar with notes on the viviparous beetles. Ann. Zool. 50, 15–25 (2000).
Kaufmann, T. Observations on some factors which influence aggregated by Blaps sulcata in Israel. Ann. Entomol. Soc. Am. 59, 660–664 (1966).
Kiihnelt, G. On the biology and temperature accommodation of Lepidochora argentogrisea Koch. Sci. Pap. Namib Desert Res. Stn. 51, 121–122 (1969).
Hamilton, W. J. Competition and thermoregulatory behaviour of the Namib desert tenebrionid beetle genus Cardiosis. Ecology 52, 810–822 (1971).
Watt, J. A revised subfamily classifcation of Tenebrionidae (Coleoptera). N. Z. J. Zool. 11, 381–452 (1974).
Burakowski, B. Laboratory methods for rearing soil beetles (Coleoptera). Memorab. Zool. 46, 1–66 (1993).
De Block, M. & Stoks, R. Fitness effects from egg to reproduction: Bridging the life history transition. Ecology 86, 185–197 (2005).
Pechenik, J. A. Larval experience and latent effects: Metamorphosis is not a new beginning. Integr. Comp. Biol. 46, 323–333 (2006).
Doyen, J. T. Reconstitution of Coelometopini, Tenebrionini and related tribes of America north of Colombia (Coleoptera: Tenebrionidae). J. N. Y. Entomol. Soc. 97, 277–304 (1989).
St. George, R. A. Studies on the larvae on North American beetles of the subfamily Tenebrioninae with a description of the larva and pupa of Merinus laevis (Olivier). Proc. U.S. Natl. Mus. 65, 1–22. https://doi.org/10.5479/si.00963801.65-2514.1 (1924).
Purchart, L. & Nabozhenko, M. V. First description of larva and pupa of the genus Deretus (Coleoptera: Tenebrionidae) with key to the larvae of the tribe Helopini. Acta Entomol. Musei Natl. Pragae 52, 295–302 (2012).
Steiner, W. Larvae and pupae of two North American darkling beetles (Coleoptera, Tenebrionidae, Stenochiinae), Glyptotus cribratus LeConte and Cibdelis blaschkei Mannerheim, with notes on ecological and behavioural similarities. ZooKeys 415, 311–327. https://doi.org/10.3897/zookeys.415.6891 (2014).
Wagner, G. & Gosik, R. Comparative morphology of immature stages of two sympatric Tenebrionidae species, with comments on their biology. Zootaxa 4111, 201–222 (2017).
Funding
Funding was provided by the National Science Centre, Poland (OPUS-19 Project 2020/37/B/NZ8/02496). We are grateful to the reviewers and Ryan Lumen (MIZ PAN) for their valuable comments on the previous versions of the manuscript.
Author information
Authors and Affiliations
Contributions
M.R. and D.I. designed and led the study. M.R. generated the microCT data. M.R. and M.J.K. analyzed the data. M.R., M.J.K, and D.I. interpreted the results. M.J.K. wrote the manuscript with input from M.R. and D.I.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Publisher's note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Raś, M., Kamiński, M.J. & Iwan, D. Fossoriality in desert-adapted tenebrionid (Coleoptera) larvae. Sci Rep 12, 13233 (2022). https://doi.org/10.1038/s41598-022-17581-6
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-022-17581-6
- Springer Nature Limited