Abstract
Hybrid halide perovskite solar cells have recently attracted substantial attention, mainly because of their high power conversion efficiency. Among diverse variants, (CH3NH3)PbI3 and HC(NH2)2PbI3 are particularly promising candidates because their bandgap well matches the energy range of visible light. Here, we demonstrate that the large nonlinear photocurrent in β-(CH3NH3)PbI3 and α-HC(NH2)2PbI3 is mostly determined by the intrinsic electronic band properties near the Fermi level, rooted in the inorganic backbone, whereas the ferroelectric polarization of the hybrid halide perovskite is largely dominated by the ionic contribution of the molecular cation. The spatial charge shift upon excitation is attributed to the charge transfer from iodine to lead atoms in the backbone, which is independent of the presence of the cationic molecules. Our findings can serve as a guiding principle for the design of future materials for halide-perovskite solar cells with further enhanced photovoltaic performance.
Similar content being viewed by others
Introduction
Perovskite solar cells (PSCs) have garnered increasing attention as promising optoelectronic devices because of their spontaneous ferroelectricity and the good match between their bandgap energy and the energy range of the solar spectrum1,2,3,4,5. Since the first demonstration of PSCs in 20096, substantial progress has been made: the power conversion efficiencies (PCEs) of PSCs, which are the key property with respect to harvesting solar energy, have dramatically increased from 3.8% to 25.2% in this period6,7,8,9,10. Recently, numerous attempts to tailor the energy bandgap to enable harvesting of a wider range of the solar energy spectrum have been reported9,10.
Among various materials for PSCs, the halide perovskites, CH3NH3PbI3 (methylammonium lead iodide, MAPbI3) and HC(NH2)2PbI3 (formamidinium lead iodide, FAPbI3), are the most promising candidates in terms of optical absorption and carrier mobility1,4. They undergo successive structural phase transitions as their temperature is varied, as illustrated in Fig. 1a4,11,12. In both cases, the alpha phase (α), characterized by an ordered cubic structure, is stable at high temperatures (> 330 K) (Fig. 1b). Near or below room temperature (< 300 K), MAPbI3 exhibits the beta phase (β) with space group I4/mcm (Fig. 1c), whereas FAPbI3 preferentially forms the trigonal delta phase (δ) (Fig. 1d). β-MAPbI3 exhibits spontaneous electric polarization caused mainly by the alignment of the MA molecules along the z-axis along with marginal atomic distortion of the Pb–I octahedra. Although the presence of the ferroelectricity has been theoretically predicted in halide perovskites3,13, its experimental manifestation is not apparent depending on the experimental details4,14,15, and it has not been accurately revealed until recently even using state-of-the-art methods such as second harmonic generation and piezoresponse force microscopy16,17,18,19,20. The trigonal δ-FAPbI3 is composed of one-dimensional needle-like structures and exhibits a large bandgap (2.43 eV), leading to marginal photoactivity21. At low temperatures (< 130 K), whereas MAPbI3 exhibits an orthorhombic gamma (γ) phase consisting of rotated octahedra (Fig. 1e), the beta phase becomes stable for FAPbI3. β-MAPbI3 has been explored as a promising candidate for harvesting solar energy9; however, the low photoactivity of δ-FAPbI3 has hampered its utilization for the photovoltaic effect. As an alternative, α-FAPbI3, which possesses a desirable bandgap (1.47 eV), has been demonstrated to exhibit a high PCE when its structural stability at room temperature is enhanced by annealing21.
(a) The phase variations of MAPbI3 and FAPbI3 at various temperatures. There are four different phases: (b) the cubic alpha (α) phase, (c) the tetragonal beta (β) phase, (d) the trigonal delta (δ) phase, and (e) the orthorhombic gamma (γ) phase. (b)–(e) Gray and purple spheres indicate lead and iodine atoms, respectively. The methylammonium (MA) or formamidinium (FA) molecular units are represented by orange spheres.
The shift current model, also known as the bulk photovoltaic effect (BPVE), is derived by the intrinsic quantum–mechanical nature of the electronic band structures22,23,24. It is the second-order optical response that has been established through second-order perturbation theory25. When electrons are excited from the valence band to the conduction bands in a non-centrosymmetric material, the charge center of the electrons is also shifted, giving rise to a non-linear current. The charge-shifting mechanism is attributed to the difference in the Berry connection between the valence and conduction bands26, and real-space mapping of the charge variation under excitation is key to fully elucidating the underlying physics. Although halide perovskites have attracted widespread interest as solar energy harvesters and extensive related research has been performed3,27,28,29,30,31, the light–matter interaction mechanism (especially for the shift current mechanism) responsible for the bulk photovoltaic characteristics has not yet been satisfactorily investigated. In particular, a comparison and contrast of electronic properties between MAPbI3 and FAPbI3, which are the most promising candidates among the known halide perovskites, may concretize the search direction for materials that enhance the light-harvesting efficiency PSCs.
In this letter, we investigate the electronic structure and the optoelectronic properties of β-MAPbI3 and α-FAPbI3. In particular, we identify the separate contributions of the Pb–I backbone and molecular-cation effect. As a result of extensive density functional theory (DFT) calculations, we find that, although the ferroelectric polarization sharply depends on the alignment of the molecular cations, the large shift current is mainly determined by the intrinsic band structure of the Pb–I backbone. Specifically, charge-transfer within the backbone from I to Pb atoms produces the large shift current. We also discuss the robust shift current generated irrespective of the variation of the electric polarization in a wide range of frequencies.
Results and discussion
We first investigated the microscopic origin of the electric polarization in β-MAPbI3 and α-FAPbI3 because ferroelectricity is usually considered a key prerequisite for the BPVE. The detailed crystal structures of both cases are summarized in Tables S1 and S2. As depicted in Fig. 2a,b, these photoactive phases comprise an inorganic frame of octahedral PbI3 and organic cations (MA or FA) with the molecular dipole (and also the ferroelectricity) oriented in the z-direction26. The insets of Fig. 2a,b show that the molecule aligned along the z-axis has the yz mirror plane. To visualize the effect of molecular orientation, we rotated the molecule in the xz plane keeping the inorganic frame fixed and calculated the electric polarization using the Berry phase method32,33. The molecular orientation, defined by the tilting angle θ, is depicted in Fig. 2c, and the obtained ferroelectricity with respect to the tilting angle is presented in Fig. 2d,e. The electric polarization shows the cyclic behaviors in its x and z components out of phase by 90°, which implies that the orientation of the molecules is a primary factor influencing the electric polarization in these photovoltaic perovskite materials. As the molecules are rotated in the xz plane, the y-component of the electric polarization remains intact irrespective of the molecular orientation. As naturally inferred from the close correlation between the molecular orientation and the ferroelectricity, the ionic contribution is dominant in the polarization, whereas the compensating electronic part remains marginal [Fig. S1]. As the orientation of cationic molecule dominantly determines the ferroelectricity of the hybrid halide perovskites, it is questionable whether the pure electronic properties, and related optoelectronic characters (for example, the shift current on excitations), are affected by or independent of the ionic ferroelectricity. Note that the known PCEs of β-MAPbI3 and α-FAPbI3 are almost comparable9,10, despite the large difference in their ferroelectricity. Though extensive studies of the PCEs are necessary to understand the effects of various factors (for example, electron/hole recombination process and grain boundary1,34,35) on device characteristics36,37, here we can infer that the effect of the ferroelectricity is not essential for the PCEs of these halide perovskite. Later we show that the shift current, the intrinsic electronic nature, is almost independent of the ionic ferroelectricity.
Crystal structures of (a) β-MAPbI3 and (b) α-FAPbI3 with the molecular dipole aligned along the z-axis. (c) Magnified view of the MA (red circle) and the FA (blue circle) molecular cations in β-MAPbI3 and α-FAPbI3 structures, respectively. The tilt of the MA (or FA) molecular cations from the z-axis is denoted by θ. Electric polarization of (d) β-MAPbI3 and (e) α-FAPbI3 with respect to the tilting angle of the inserted molecules. (a)–(c) Gray spheres, Pb; purple spheres, I; brown spheres, C; light-blue spheres, N; and pink spheres, H.
To elucidate the origin of the large BPVE in β-MAPbI3 and α-FAPbI3, comparable to the well-known perovskite oxides such as PbTiO3 (~ 53 μA/V2) and BaTiO3 (~ 36 μA/V2)38, we calculated the electronic structure and optoelectronic properties of the photoactive phases. As illustrated in Fig. 3a, the valence-band maximum (VBM) and the conduction-band minimum (CBM) of β-MAPbI3 are located near the Γ point in the tetragonal first Brillouin zone [Fig. S2(a)], exhibiting apparent Rashba splittings induced by the z-directional electric polarization. For α-FAPbI3 (Fig. 3b), similar Rashba-split bands appear near the R point [Fig. S2(b)]; however, their splittings are considerably smaller than that of β-MAPbI3, consistent with the diminutive electric polarization. The effect of Rashba splitting on the density of states is summarized in Fig. S3. Even when the ferroelectricity of α-FAPbI3 is adjusted by relocation of the molecule, as shown in Fig. S4, the Rashba splittings still remain smaller than those of β-MAPbI3. Notably, the calculated bandgaps of β-MAPbI3 (0.46 eV) and α-FAPbI3 (0.38 eV), which are consistent with the previous theoretical results39, are much smaller than the experimental values (1.55 eV for β-MAPbI3 and 1.47 eV for α-FAPbI3)13,40, which is ascribed to the well-documented bandgap underestimation of standard DFT. We compared the band dispersions and orbital characters obtained by the PBE potential with those obtained by the HSE functional, and the electronic structures shown in Fig. 3 preserve the qualitative validity other than the inherent underestimation of the quasiparticle excitation energy [Fig. S5].
Band structures of (a) β-MAPbI3 and (b) α-FAPbI3 with z-directional ferroelectricity. Calculated shift-current spectra \({\sigma }^{abb}\) (a and b = x, y, z) for (c) β-MAPbI3 and (d) α-FAPbI3 with respect to the frequency of the applied light. Optical active projected density of states (o-PDOS) of (e) β-MAPbI3 and (f) α-FAPbI3 corresponding to effective visible-light active range [the yellow dots in (a) and (b)]. The insets in (e) and (f) are the real-space representation of the charge density of the initial and the final states. The optical excitations corresponding to the yellow (purple) shift-current range in (c) and (d) are represented by the yellow (purple) dots in (a) and (b), respectively. (a)–(b) The dot size is proportional to the transition rate, and the purple dot size is enlarged five times for clear visualization.
The shift-current spectra of β-MAPbI3 and α-FAPbI3, as computed using second-order-perturbation theory, are presented in Fig. 3c,d with respect to the light frequency. Their shift currents increase with increasing photon energy and then reach maximum values (59 μA/V2 for β-MAPbI3 and 67 μA/V2 for α-FAPbI3) at ~ 2.7 eV. Given the tendency of DFT to underestimate bandgaps, we classified the photon energy into two regimes: the effective visible-light active range [0.5–1.3 eV, corresponding to the yellow area in Fig. 3c,d] and the effective ultraviolet (UV) active range [2.0–3.0 eV, corresponding to the purple area in Fig. 3c,d]. The corresponding energy ranges in the band structures are denoted with the same color scheme (Fig. 3a,b). As expected, the effective visible-light-induced shift current is driven by the excitations among band edges, which include substantial Rashba splittings, whereas the effective UV-light contribution is more widely distributed over the whole Brillouin zone. More detailed momentum-resolved shift currents along the high-symmetry lines are presented in Fig. S6 We note that, when the Pb-I backbone is fixed, the energy difference between the ferroelectric and the antiferroelectric states is 21 meV (Fig. S7), indicating the observed ferroelectricity can be reduced in experiment. Nevertheless, the overall trend of the shift current spectrum is well maintained irrespective of the molecular orientation (Figs. S8 and S9).
We now examine the orbital character of the band-edge states responsible for the shift current in the given ranges, for example the effective visible or UV range, as shown in Fig. 3c,d. Here, we define the optical active projected density of states (o-PDOS) by the orbital-projected DOS (PDOS) weighted by the contributions of each band state to the shift current. Detailed description of the definition of the o-PDOS, in comparison with the PDOS, are summarized in supplementary note 1. The optical active PDOS in the effective visible-light active range, which is denoted by yellow dots in Fig. 3a,b, are presented in Fig. 3e,f. The same PDOS in the effective UV-light active range [indicated by the purple dots in Fig. 3a,b] are shown in Fig. S10. Note that the valence (conduction) bands originate mainly from I (Pb) p-orbitals, which means the charge shift upon excitation is induced by charge transfer from I to Pb atoms. The orbital character of the initial and final states, as represented in real-space charge densities in the inset of Fig. 3e,f, indeed confirms this character. This result indicates that the role of the cationic molecule (MA or FA) is limited to charge donation and that the large photovoltaic charge shift in these perovskite materials occurs through I–Pb charge transfer within the backbone.
To more explicitly demonstrate that the Pb–I octahedra dominate the generation of the shift current, whereas the MA molecules merely donate electrons to the framework, we calculated the shift current of the four-electron-addition β-PbI3 (4e-β-PbI3) and β-PbI3 with Li substituted for MA molecules (β-LiPbI3). In all of these calculations, the Pb-I frame is kept fixed and Li atoms are substituted in the center of the MA (or FA) molecules. The states near the Fermi level of these two test cases (Fig. 4a,b) are similar to those in the case of β-MAPbI3 (Fig. 3a). Surprisingly, the spin-split Rashba bands are maintained even in the absence of the MA molecules, which are the main source of the ferroelectricity. This result indicates that the small I-atom displacement along the z-axis is mainly responsible for the Rashba splittings in the bands near the Fermi level [Fig. S11]. In the absence of the molecular dipole, the ferroelectric polarization is substantially diminished as shown in Fig. 4c, however, these two test cases produce shift-current spectra similar to the spectrum of β-MAPbI3 up to the effective UV active range as shown in Fig. 4d. The deviation of the shift current spectrum of β-LiPbI3 in high energy region is attributed to the presence of the unoccupied Li states above 3 eV. These results clearly imply that the aforementioned shift currents are mainly produced by the inorganic framework (Pb–I octahedra) and that the generated shift current is not proportional to the ferroelectricity. Furthermore, as evidenced by the results for α-FAPbI3, the Rashba bands are not a prerequisite for a large shift current in halide perovskites. We obtained a similar shift-current spectrum even in the absence of the obvious Rashba splitting in α-FAPbI3 [Fig. S12].
(a) Band structures of the beta phase of PbI3 (a) without a cationic molecule but with the corresponding number of added electrons (4 e/cell), referred to as 4e-β-PbI3. (b) The same as shown in (a) but with Li substituted for the MA molecule, referred to as β-LiPbI3. (c) Electric polarization (Ptot), ionic polarization (Pion), and electronic polarization (Pel) of β-MAPbI3, 4e-β-PbI3, and β-LiPbI3. (d) Calculated shift-current spectra for β-MAPbI3, 4e-β-PbI3, and β-LiPbI3.
Conclusion
In summary, we investigated the electronic band structures and optoelectronic properties of β-MAPbI3 and α-FAPbI3 using first-principles methods. We showed that, although the molecular cation is the primary contributor to the ferroelectricity of these halide perovskites, the shift current up to the effective UV active range mostly originates from charge transfer within the Pb–I backbone octahedra. To demonstrate these separate mechanisms, we tested two artificial structures with pure electron doping without a molecular cation and with Li substituted for the cation molecules. We concluded that this ab initio understanding of the sharply distinct roles of the cationic molecules and the backbone inorganic framework can be used as a guiding principle for the future development of related photovoltaic materials.
Method
Our DFT calculations were performed with the projected augmented plane-wave method41,42, as implemented in the Vienna Ab initio Simulation Package (VASP)43. The exchange–correlation potential proposed by Perdew, Burke, and Ernzerhof (PBE) was primarily used44, however, a nonlocal hybrid functional, the Heyd–Scuseria–Ernzerhof (HSE) functional45, was also complementarily used for a cross-check. We used experimentally determined structural parameters for β-MAPbI3 and α-FAPbI3 in our calculations. The energy cutoff for the plane-wave-basis expansion was set to 500 eV. We employed 8 × 8 × 6 k-point grids for β-MAPbI3 and 8 × 8 × 8 k-point grids for α-FAPbI3 to sample the Brillouin zone. The shift current Ja is a second order response and thus can be expressed in terms of two electric field components and material-dependent response function \(({J}_{a}={\sigma }^{abc}{E}_{b}{E}_{c})\). The shift current spectra are expressed by: \({\sigma }^{abc}\left(\omega \right)=\frac{i\pi {e}^{3}}{2{\hslash }^{2}}\int \frac{d\overrightarrow{k}}{8{\pi }^{3}}\sum_{n,m}({r}_{mn}^{b}{r}_{nm;a}^{c}+{r}_{mn}^{c}{r}_{nm;a}^{b})\delta ({\omega }_{mn}-\omega )\) where indices a, b, and c represent Cartesian directions, \({r}_{mn}^{b}\) denotes the velocity matrix elements, and \({r}_{nm;a}^{c}\) denotes the generalized derivatives, which are defined as \({r}_{nm;a}^{c}=\frac{\partial {r}_{nm}^{c}}{\partial {k}_{a}}-i({A}_{mm}^{a}-{A}_{nn}^{a}){r}_{mn}^{c}\) with the Berry connections \({A}_{mm}^{a}\)22,46. The shift-current spectra were calculated from the maximally localized Wannier function using the WANNIER90 package47 with 30 × 30 × 20 k-point grids for β-MAPbI3 and 50 × 50 × 50 k-point grids for α-FAPbI3. We show that the Brillouin zone sampling sizes we adopted in our calculation are large enough to give reliable results (Fig. S13).
Data availability
The data that support the findings of this study are available from the corresponding author upon reasonable request.
References
Stranks, S. D. et al. Electron-hole diffusion lengths exceeding 1 micrometer in an organometal trihalide perovskite absorber. Science 342, 341 (2013).
Im, J., Lee, C., Lee, J., Park, S. & Park, N. 6.5% Efficient perovskite quantum-dot-sensitized solar cell. Nanoscale 3, 4088 (2011).
Frost, J. M. et al. Atomistic origins of high-performance in hybrid halide perovskite solar cells. Nano Lett. 14, 2584 (2014).
Stoumpos, C. C., Malliakas, C. D. & Kanatzidis, M. G. Semiconducting tin and lead iodide perovskites with organic cations: phase transitions, high mobilities, and near-infrared photoluminescent properties. Inorg. Chem. 52, 9019 (2013).
Sun, Z. et al. A photoferroelectric perovskite-type organometallic halide with exceptional anisotropy of bulk photovoltaic effects. Angew. Chem. 55, 6545 (2016).
Kojima, A., Teshima, K., Shirai, Y. & Miyasaka, T. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells. J. Am. Chem. Soc. 131, 6050 (2009).
Lewis, N. S. Toward cost-effective solar energy use. Science 315, 798 (2007).
Burschka, J. et al. Sequential deposition as a route to high-performance perovskite-sensitized solar cells. Nature 499, 316 (2013).
Chen, Z. et al. Single-crystal MAPbI3 perovskite solar cells exceeding 21% power conversion efficiency. ACS Energy Lett. 4, 1258 (2019).
Min, H. et al. Efficient, stable solar cells by using inherent bandgap of α-phase formamidinium lead iodide. Sciecne 366, 749 (2019).
Poglitsch, A. & Weber, D. Dynamic disorder in methyl ammonium trihalogenoplumbates(II) observed by millimeter-wave spectroscopy. J. Chem. Phys. 87, 6373 (1987).
Yamamuro, N. O., Yamamuro, O., Matsuo, T. & Suga, H. p-T phase relations of CH3NH3PbX3 (X = Cl, Br, I) crystals. J. Phys. Chem. Solids 53, 277 (1992).
Fan, Z. et al. Ferroelectricity of CH3NH3PbI3 perovskite. J. Phys. Chem. Lett. 6(7), 1555–1161 (2015).
Unger, E. L. et al. Hysteresis and transient behavior in current-voltage measurements of hybrid-perovskite absorber solar cells. Energy Environ. Sci. 7, 3690 (2014).
Xiao, Z. et al. Giant switchable photovoltaic effect in organometal trihalide peroskite devices. Nat. Mater. 14, 193–198 (2015).
Sharada, G. et al. Is CH3NH3PbI3 polar?. J. Phys. Chem. Lett. 7, 2412–2419 (2016).
Sharada, G. et al. Behavior of methylammonium dipoles in MAPbX3 (X=Br and I). J. Phys. Chem. Lett. 8, 4113–4121 (2017).
Kutes, Y. et al. Direct observation of ferroelectric domains in solution-processed CH3NH3PbI3 perovskite thin films. J. Phys. Chem. Lett. 5, 3335–3339 (2014).
Röhm, H. et al. Ferroelectric domains in methylammonium lead iodide perovskite thin-films. Energy Environ. Sci. 10, 950–955 (2017).
Gomez, A. et al. ferroelectricity-free lead halide perovskites. Energy Environ. Sci. 12, 2537–2547 (2019).
Ma, F. et al. Stable α/δ phase junction of formamidinium lead iodide perovskites for enhanced near-infrared emission. Chem. Sci. 8, 800 (2017).
Kim, B. et al. Releasing the hidden shift current in the TTF-CA organic molecular solid via symmetry lowering. Npj Comput. Mater. 6, 6 (2020).
Liang, Z. T. et al. Shift current bulk photovoltaic effect in polar materials—hybrid and oxide perovskites and beyond. Npj Comput. Mater. 2, 16026 (2016).
Banasree, S., Yang, Z., Rajyavardhan, R. & Jeroen, V. D. B. First-principles calculation of shift current in chalcopyrite semiconductor ZnSnP2. Phys. Rev. Mater. 4, 064602 (2020).
Sipe, J. E. & Shkrebtii, A. I. Second-order optical response in semiconductors. Phys. Rev. B. 61, 5337 (2000).
Kim, K., Morimoto, T. & Nagaosa, N. Shift charge and spin photocurrents in Dirac surface states of topological insulator. Phys. Rev. B 95, 035134 (2017).
Zheng, F. et al. First-principles calculation of the bulk photovoltaic effect in CH3NH3PbI3 and CH3NH3PbI3–xClx. J. Phys. Chem. Lett. 6, 31 (2015).
Hernandez-Haro, N. et al. DFT prediction of band gap in organic-inorganic metal halide perovskites: an exchange-correlation functional benchmark study. Chem. Phys. 516, 225 (2019).
Chen, Q. et al. Under the spotlight: the organic–inorganic hybrid halide perovskite for optoelectronic applications. Nano Today 10, 355 (2015).
Mohebpour, M. A., Saffari, M., Soleimani, H. R. & Tagani, M. B. High performance of mixed halide perovskite solar cells: role of halogen atom and plasmonic nanoparticles on the ideal current density of cell. Physica E 97, 282 (2018).
Ono, L. K., Juarez-Perez, E. J. & Qi, Y. Progress on perovskite materials and solar cells with mixed cations and halide anions. ACS Appl. Mater. Interfaces 9, 30197 (2017).
King-Smith, R. & Vanderbilt, D. Theory of polarization of crystalline solids. Phys. Rev. B 47, 1651 (1993).
Resta, R. Macroscopic polarization in crystalline dielectrics: the geometric phase approach. Rev. Mod. Phys. 66, 899 (1994).
Wang, Q. et al. Scaling behavior of moisture-induced grain degradation in polycrystalline hybrid perovskite thin films. Energy Environ. Sci. 10, 516 (2017).
Tennyson, E. M. et al. Heterogeneity at multiple length scales in halide perovskite semiconductors. Nat. Rev. Mater. 4, 573 (2019).
Wang, Y. et al. Towards printed perovskite solar cells with cuprous oxide hole transporting layers: a theoretical design. Semicond. Sci. Technol. 30, 054004 (2015).
Haider, S. Z., Anwar, H., Jamil, Y. & Shahid, M. A comparative study of interface engineering with different hole transport materials for high-performance perovskite solar cells. J. Phys. Chem. Solids 136, 109147 (2020).
Young, S. M. & Rappe, A. M. First principles calculation of the shift current photovoltaic effect in ferroelectrics. Phys. Rev. Lett. 109, 116601 (2012).
Kim, M. et al. Switchable S = 1/2 and J = 1/2 Rashba bands in ferroelectric halide perovskites. Proc. Natl. Acad. Sci. USA 111(19), 6900–6904 (2014).
Kim, H. et al. Lead iodide perovskite sensitized all-solid-state submicron thin film mesoscopic solar cell with efficiency exceeding 9%. Sci. Rep. 2, 591 (2012).
Bloch, P. E. Projector augmented-wave method. Phys. Rev. B 50, 17953 (1994).
Kresse, G. & Joubert, D. From ultrasoft pseudopotentials to the projector augmented-wave method. Phys. Rev. B 59, 1758 (1999).
Kresse, G. & Hafner, J. Ab initio molecular dynamics for liquid metals. Phys. Rev. B 47, 558 (1993).
Perdew, J. P., Burke, K. & Ernzerhof, M. Generalized gradient approximation made simple. Phys. Rev. Lett. 77, 3865 (1997).
Heyd, J., Scuseria, G. E. & Ernzerhof, M. Hybrid functionals based on a screened Coulomb potential. J. Chem. Phys. 118, 8207 (2003).
Rangel, T. et al. Large bulk photovoltaic effect and spontaneous polarization of single-layer monochalcogenides. Phys. Rev. Lett. 119, 067402 (2017).
Mostofi, A. A. et al. An updated version of wannier90: a tool for obtaining maximally-localised Wannier functions. Comput. Phys. Commun. 185, 2309 (2014).
Acknowledgements
This work was supported by Incheon National University Research Grant in 2019 (2019-0291). This work was supported by the National Research Foundation of Korea (NRF) grant funded by the Korea government (MSIT) (NRF-2019R1A2C2089332).
Author information
Authors and Affiliations
Contributions
B.K. and J.K. performed the calculations and wrote the draft. B.K., J.K. and N.P. discussed the motivation and wrote the manuscript.
Corresponding authors
Ethics declarations
The authors declare no competing interests.
Additional information
Publisher's note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Kim, B., Kim, J. & Park, N. First-principles identification of the charge-shifting mechanism and ferroelectricity in hybrid halide perovskites. Sci Rep 10, 19635 (2020). https://doi.org/10.1038/s41598-020-76742-7
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-020-76742-7
- Springer Nature Limited
This article is cited by
-
Phase transformations and vibrational properties of hybrid organic–inorganic perovskite MAPbI3 bulk at high pressure
Scientific Reports (2023)
-
Giant bulk photovoltaic effect driven by the wall-to-wall charge shift in WS2 nanotubes
Nature Communications (2022)