Abstract
A microtube implosion driven by ultraintense laser pulses is used to produce ultrahigh magnetic fields. Due to the laser-produced hot electrons with energies of mega-electron volts, cold ions in the inner wall surface implode towards the central axis. By pre-seeding uniform magnetic fields on the kilotesla order, the Lorenz force induces the Larmor gyromotion of the imploding ions and electrons. Due to the resultant collective motion of relativistic charged particles around the central axis, strong spin current densities of \(\sim\) peta-ampere/\(\hbox {cm}^{2}\) are produced with a few tens of nm size, generating megatesla-order magnetic fields. The underlying physics and important scaling are revealed by particle simulations and a simple analytical model. The concept holds promise to open new frontiers in many branches of fundamental physics and applications in terms of ultrahigh magnetic fields.
Similar content being viewed by others
Introduction
Laboratory generation of strong magnetic fields have been intensively studied1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18, because such fields may realize new experimental tools for fundamental studies and support diverse applications. Examples include plasma and beam physics19,20,21,22,23,24, astro-25, 26 and solar-physics27, 28, atomic and molecular physics29, and materials science30, 31. Magnetic field reconnection27, 28, generation of collisionless shock19, gamma-ray and pair production32,33,34, and fusion application in a strongly magnetized plasma35,36,37,38 are receiving increased attention. Although laser−solid interactions numerically predict magnetic fields \(\lesssim\) a few hundreds kT18, 21, 23, the highest magnetic field experimentally observed to date is on the kilotesla (kT) order12, 15.
(a) Perspective view of a microtube irradiated by ultraintense laser pulses (laser configuration is just schematic). Uniform external magnetic field \(\mathbf{B}_0\) is pre-seeded prior to main laser illumination. (b) Top view of the inner plasma dynamics. Laser-produced hot electrons drive isothermal expansion of the inner-wall plasma into vacuum. (c) Ultrahigh magnetic field \(\mathbf{B}_{\mathrm{c}}\) is generated at the center due to the collectively formed currents by ions and electrons, which are deflected in opposite directions by \(\mathbf{B}_0\).
Temporal evolution of the normalized densities of ions \({\tilde{n}}_{\mathrm{i}}=n_{\mathrm{i}}/n_{{\mathrm{i0}}}\) and electrons \({\tilde{n}}_{{\mathrm{e}}}=n_{{\mathrm{e}}}/n_{\mathrm{e0}}\) under charge neutrality \(n_{\mathrm{e0}}=Z n_{{\mathrm{i0}}}\) with \(Z=6\) (fully ionized carbon plasma). Other fixed parameters are \(R_0=3\,\mu \hbox {m}\), \(n_{{\mathrm{i0}}}=1\times 10^{23}\)\(\hbox {cm}^{-3}\) (i.e., \(2\hbox { g}\,\hbox {cm}^{-3}\)), \(B_0=4\) kT, and \({\mathcal {E}}_{{\mathrm{he.av}}}=5\) MeV. Dashed curves are obtained by the model lines for constant velocities (Fig. 4b) and the density given by Eq. (3). Inset shows a magnified view of the yellow-painted area.
Here we propose a novel concept called a microtube implosion (MTI), which generates megatesla (MT) magnetic fields utilizing a structured target and intense laser pulses. Suppose that a long-stretched cylindrical target contains a coaxial hollow cylindrical space with an inner radius of \(R_0\sim 1-10\,\mu \hbox {m}\) (Fig. 1a). Irradiating the target by ultraintense femtosecond laser pulses with an intensity of \(I_{\mathrm{L}} \sim 10^{19}-10^{22}\)\(\hbox {Wcm}^{-2}\) generates hot electrons with temperatures of \(T_{{\mathrm{e}}}\sim 1-\) a few 10’s mega-electron volts (MeV) according to the ponderomotive scaling39. Note that the ponderomotive scaling does not resemble the true dynamics of electrons on a solid surface with a steep density gradient, where the prerequisites for decoupling the quiver and envelope motion of electrons do not hold. Hot electrons ionize the target material to produce a plasma of atomic mass number A and initial ion density \(n_{{\mathrm{i0}}}\sim 10^{23}\hbox { cm}^{-3}\) to ionization state Z.
The hot electrons are so energetic that some of them exit the target wall and enter the cavity. Therein the electron pressure and the electrostatic force balance with each other to form an electron sheath on the plasma/vacuum interfaces. The surface ions are accelerated inward (implosion, Fig. 1b) through expansion into a vacuum by the sheath electric field40,41,42,43,44. In the ideal situation where a system has a perfect axial symmetry, the temporal evolution of the imploding and exploding plasma should also be axially symmetric. In this configuration, a magnetic field does not evolve. However, if a pre-seeded magnetic field is introduced into the system, an extraordinary magnetic field can be generated at the center with a \(2-3\) orders of magnitude larger magnification factor.
Snapshots taken from the dominant period for the magnetic field generation, \(\tau \approx 80-120\) fs. Fixed parameters are the same as those in Fig. 2. (a) Normalized ion density \({\tilde{n}}_{\mathrm{i}}=n_{\mathrm{i}}/n_{{\mathrm{i0}}}\), (b) normalized electron density \({\tilde{n}}_{{\mathrm{e}}}=n_{{\mathrm{e}}}/n_{\mathrm{e0}}\), (c) azimuthal electron current \(J_{{{\mathrm{e}}}\phi }\), and (d) magnetic field \(B_{\mathrm{z}}\).
Analytical model: (a) Schematic explaining the relation between the key parameters (not to scale). Curve with its coordinate s stands for an ion path, on which the ion implodes at a constant speed as a function of \(\xi\). In most practical cases, \(R_{\mathrm{H}} (\mathrm{nm}) \ll R_0 (\mu {\mathrm{m}}) \ll R_{\mathrm{L}} (\mathrm{mm})\). (b) Radius-time diagram of \(\xi\)-contour lines under the same parameters as in Figs. 2 and 3. Temporal evolution of the density profile shown in Fig. 2 is directly obtained from this diagram coupled with Eq. (3). The time lag of 12 fs between \(\tau =0\) and \(t=0\) is fixed such that the timing of the cavity collapse coincide for both the simulation and the model.
A uniform magnetic field \({{{\varvec{B}}}}_0\) on the kT order, which is parallel to the cylindrical axis (z-axis), is pre-seeded by an external laser-plasma device such as a capacitor coil4, 12,13,14. Using a ns-long laser, such a seed field quickly rises on the sub-ns time scale and diffuses into the MTI target nearly simultaneously, and then slowly decays on time scales \(\gtrsim\) 10 ns, which are characterized by impedance of the capacitor-coil. Thus, the lifetime of such a pre-seeded magnetic field \(\gtrsim 10\) ns is much longer than the characteristic time scale of MTI \(\sim\) 100 fs. During the implosion, the Lorenz force deflects ions and electrons clockwise and anticlockwise, respectively, gaining azimuthal momentum, as depicted in Fig. 1c. The ion trajectories draw circles with Larmor radii \(\sim 0.1-1\) mm for typical laser and target parameters in MTI. In particular, the envelope of the ion paths forms a nanometer-scale hole at the center (hereafter called the “Larmor hole”). Since electrons are negatively charged, the resultant direction of the electron current \({{\varvec{J}}}_{{{\mathrm{e}}}\phi }\) is anticlockwise, which is the same as that of the ion current \({{\varvec{J}}}_{{\mathrm{i}}\phi }\). Then ultraintense spin currents on the order of \(10^{15}\)\(\hbox {A\,cm}^{-2}\) run around the Larmor hole. Consequently, the currents from the ions and electrons work together to generate MT-order magnetic field \({{\varvec{B}}}_{\mathrm{c}}\) at the center.
Compared with other conventional approaches, the most innovative point of the current concept lies in the geometrically unique plasma flow. A cylindrically converging flow composed of relativistic electrons and ions, which are infinitesimally twisted by the pre-seeded magnetic field in opposite directions, can effectively produce ultrahigh spin currents and consequently, ultrahigh magnetic fields. In addition, the current geometry may be better suited for many practical purposes.
For over 50 years, researchers have strived to realize high magnetic fields. Many approaches have been employed, including high explosives1, 2, electromagnetic implosions3, 7, high-power lasers10, 11, and Z pinches5, 6. The principal physical mechanism of these works is based on magnetic flux compression (MFC) using hollow cylindrical structures and pre-seeded magnetic fields. The present scheme also uses a similar physical configuration. However, MTI differs from MFC because the ultrahigh magnetic fields in MTI are generated by the spin currents induced by collective Larmor gyromotions.
Maximum magnetic field as a function of coupling parameter \(\Psi\) [Eq. (8)], where \({\tilde{n}}_{23}=n_{\mathrm{i0}}/10^{23}\hbox {cm}^{-3}\), \({\tilde{R}}_3=R_0/3\mu {\mathrm{m}}\), and \(\tilde{{\mathcal {E}}}_{6}={\mathcal {E}}_{{\mathrm{he.av}}}/6\)MeV denote normalized values for the initial ion density, inner radius of the microtube, and average electron energy, respectively. \(Z=6\) and \(A=12\) are fixed assuming a fully ionized carbon plasma. Solid circles are EPOCH results, which are linked by the dashed curves to smoothly guide the readers’ eye.
Electron energy spectrum and magnetic field growth in laser-driven targets (\(\lambda _{\mathrm{L}}= 0.8\,\mu \hbox {m}\), \(I_{\mathrm{L}}= 10^{21}\) W/\(\hbox {cm}^2\), \(\tau _{\mathrm{L}}=100\) fs). (a) Blue-line: Laser-produced electron energy spectrum under \(B_0 = 6\) kT, normalized such that \(\int (\mathrm{d}N/\mathrm{d}{{\mathcal {E}}})\mathrm{d}{{\mathcal {E}}} = 1\). Grey dotted line: M-J fit to the spectrum using the ponderomotive temperature \(T_{\mathrm{p}} \equiv (1 + a^2_0)^{1/2}m_{{\mathrm{e}}}c^2 \approx 11\) MeV, where \(a_0 \equiv |e|E_0/m_{{\mathrm{e}}}c\omega\) for a laser with maximum electric field amplitude \(E_0\) and frequency \(\omega\). Green dash-dotted line: M-J fit to the mid-energy part of the spectrum, provided for comparison. (b) Maximum magnetic field and radius at which the field falls to half its maximum value \((r_{1/2})\), obtained by azimuthally averaging the magnetic field; \(t_0\) is the time when the peaks of the laser pulses reach either \(x = 0\) or \(y = 0\).
Detailed temporal evolution of the magnetic field \(B_{{\mathrm{z}}}\) and the normalized ion density \(n_{\mathrm{i}}/n_{{\mathrm{i0}}}\) of laser-driven MTI. Summary plots are given in Fig. 6. (a,b) results with \(B_0=6\) kT. (c,d) results with \(B_0=0\). (a,c) Magnetic field in the microtube. (b,d) Density of carbon ions during the implosion. The black solid and grey dashed contours indicate \(B = 6\) kT and \(B = 0\), respectively. The first time snapshot (\(t=t_0+30\) fs) corresponds to a moment immediately before the cavity collapse.
Results
Two-dimensional particle simulation
To demonstrate the expected behavior of MTI, we perform 2D (x, y) PIC simulations using the open-source fully relativistic code EPOCH45. In this first part of EPOCH simulations (v.4.10.17), we employ rather simple and ideal physical conditions to effectively extract the salient features of the underlying MTI physics. First, the simulation uses the periodic boundary conditions for particles and fields, where the hollow cylindrical volume is placed at the middle of the square computational domain. This configuration simulates collective targets with multiple equally spaced microtubes inside a heated material. We set 100 particles/cell for carbon ions and 200 particles/cell for electrons. The lengths for the unit cell size and full span of each side of the square domain are 6.25 nm and 10 \(\upmu \hbox {m}\), respectively. Therefore, the whole computational domain size is \(1600\times 1600\)\(\hbox {mesh}^2\). The initial inner radius of the microtube is \(R_0 = 3\)\(\upmu \hbox {m}\).
Second, since hot-electron average energy \({\mathcal {E}}_{{\mathrm{he.av}}}\) spans the relativistic regime for the parameters of interest, we use the Maxwell–Jüttner (M–J) distribution46 rather than the Maxwell–Boltzmann (M–B) distribution for the non-relativistic regime. The M–J distribution defines the hot electron population in terms of the Lorenz factor \(\gamma\) as \(f(\gamma )=\frac{\gamma ^2 \beta }{\Theta K_2(1/\Theta )}\exp (-\frac{\gamma }{\Theta })\), where \(\beta =v/c =\sqrt{1-1/\gamma ^2}\) and \(\Theta =T_{{\mathrm{e}}}/m_{{\mathrm{e}}}c^2\) with \(T_{{\mathrm{e}}}\), \(m_{{\mathrm{e}}}\), and c being the electron temperature, the electron rest mass, and the speed of light, respectively; \(K_2\) is the modified Bessel function of the second kind. The relation between \({\mathcal {E}}_{{\mathrm{he.av}}}\) and \(T_{{\mathrm{e}}}\) significantly differs between the two distributions. That is, \({\mathcal {E}}_{\mathrm{he.av}}=\frac{3}{2} T_{{\mathrm{e}}}\) for the M–B distribution (\({\mathcal {E}}_{{\mathrm{he.av}}}\ll m_{{\mathrm{e}}}c^2\)) while \({\mathcal {E}}_{\mathrm{he.av}}\simeq 3T_{{\mathrm{e}}}-m_{{\mathrm{e}}}c^2\) for the M–J distribution (\({\mathcal {E}}_{{\mathrm{he.av}}}\gg m_{{\mathrm{e}}}c^2\)).
It should be noted that on such an ultrashort timescale as femtoseconds, there is insufficient time for electrons to be thermalized47, 48. In this sense, employing the M–J distribution, which is characterized by a specific temperature, may not be legitimate. However, high-energy-tail electrons, whose population decreases exponentially with energy, predominantly influence the energy transport and thus the dynamics of the overall system44. In fact, both the M–J and M–B distributions have such an exponential dependence in their functional forms. For this reason, employing the M–J distribution is an acceptable choice. Actually, simulations have confirmed that the same value of \({\mathcal {E}}_{{\mathrm{he.av}}}\) yields a similar result for the implosion dynamics and the generation of the magnetic field for both energy distributions. Therefore, \({\mathcal {E}}_{{\mathrm{he.av}}}\) rather than \(T_{{\mathrm{e}}}\) is employed below as a principal parameter. Note that we later provide another set of simulation results as a proof-of-principle, using more practical conditions that take the laser−matter interactions into account, where the electron population is not approximated by the M–J distribution.
Figure 2 shows the temporal evolution of the normalized densities of ions, \({\tilde{n}}_{\mathrm{i}}=n_{\mathrm{i}}/n_{{\mathrm{i0}}}\), and electrons, \({\tilde{n}}_{{\mathrm{e}}}=n_{{\mathrm{e}}}/n_{\mathrm{e0}}\), under \(n_{\mathrm{e0}}=Z n_{{\mathrm{i0}}}\) for a fully ionized carbon plasma with \(A=12\) and \(Z=6\). The solid and dashed curves indicate the EPOCH results and the model prediction, respectively. The model is described later. Initially, the inside of the tube is empty, and the remaining volume is filled with uniform ions with \(T_{\mathrm{i}}=10\) eV and \(n_{{\mathrm{i0}}}=1\times 10^{23}\)\(\hbox {cm}^{-3}\) and uniform electrons with \({\mathcal {E}}_{{\mathrm{he.av}}}=5\) MeV. The pre-seeded magnetic field \(B_0=4\) kT is distributed uniformly over the entire computational domain.
After launching the plasma expansion into a vacuum at \(\tau =0\), the implosion phase is observed for a period, \(\tau \lesssim 70\) fs (Fig. 2). The implosion velocity of the innermost ions remains nearly constant at \(v_{\mathrm{i}}\simeq 6\times 10^9\) cm/s before the cavity collapse. Macroscopically, ions and electrons in the imploding plasma layer move together and maintain charge neutrality. The electron sheath thickness at the plasma/vacuum interface is roughly equal to the local electron Debye length \(\lambda _{\mathrm{De}}=(T_{{\mathrm{e}}}/4\pi n_{{\mathrm{e}}} e^2)^{1/2}\sim 150\) nm, where e denotes the elementary charge, \(T_{{\mathrm{e}}}\approx 1.8\) MeV (\({\mathcal {E}}_{{\mathrm{he.av}}} = 5\) MeV with the M–J distribution), and \(n_{{\mathrm{e}}}\approx 6\times 10^{21}\)\(\hbox {cm}^{-3}\) (Fig. 2).
Upon cavity collapse, the head group of imploding ions passes the target center at the Larmor hole radius \(r=R_{\mathrm{H}}\) and expands outward. The mean-free-path of ion-ion collisions is roughly given by \(\ell _{\mathrm{ii}}\sim T_{{\mathrm{e}}}^2/4\pi n_{\mathrm{i}} Z^2 e^4\), which amounts to \(\sim\) 4 cm \(\gg R_0\) under \(T_{{\mathrm{e}}}=2\) MeV, \(Z=6\), and \(n_{\mathrm{i}}=10^{23}\)\(\hbox {cm}^{-3}\). Hence, these ions collisionlessly intersect other ions, which are still imploding toward the center. Meanwhile, the central density increases to the same order as its initial value due to the geometrical accumulation effect (Fig. 2, inset). The Larmor hole radius, \(R_{\mathrm{H}}\approx 20\) nm, indicated at the top of the inset corresponds to the analytical prediction at \(\tau =90\) fs (Eq. 5). The Larmor hole is also seen in the simulation result as the one-humped structure, but the simulated one grows more quickly than the model and expands outward. This is attributed to the fact that a highly compressed ion sphere is created at the center and the strong electrostatic field radially pushes the ions outward.
Figure 3 shows snapshots taken from the dominant period of the magnetic field generation, \(\tau \approx 80-120\) fs: (a) the normalized ion density \({\tilde{n}}_{\mathrm{i}}=n_{\mathrm{i}}/n_{{\mathrm{i0}}}\), (b) the normalized electron density \({\tilde{n}}_{{\mathrm{e}}}=n_{{\mathrm{e}}}/n_{\mathrm{e0}}\), (c) the azimuthal electron current \(J_{\mathrm{e\phi }}\), and (d) the magnetic field \(B_{{\mathrm{z}}}\). Comparing Fig. 3a and b provides insight on how the core plasma develops. The one-humped structure forms in the central region and oscillates at the ion-plasma frequency \(\omega _{\mathrm{pi}}=(4\pi n_{\mathrm{i}}Z^2e^2/m_{\mathrm{i}})^{1/2}\) to emit compression waves outward at sound speed \(c_{\mathrm{s}}=(Z T_{{\mathrm{e}}}/m_{\mathrm{i}})^{1/2}\). Applying the numbers used in Fig. 3 (i.e., \(n_{\mathrm{i}}=1\times 10^{23}\)\(\hbox {cm}^{-3}\) and \(T_{\mathrm{e}}=1.8\) MeV) yields \(c_{\mathrm{s}}\simeq 9\times 10^8\) cm/s and the cycle \(\tau _{\mathrm{cyc}}=2\pi /\omega _{\mathrm{pi}}\simeq 9\) fs (\(\nu \equiv \tau ^{-1}_{\mathrm{cyc}}\simeq 110\) THz), which agree well with the simulation result.
According to Ampere’s law, \(c\nabla \times {{\varvec{B}}}=4\pi {{\varvec{J}}}+\dot{{\varvec{E}}}\), the azimuthal current distribution, \(J_\phi =J_{{{\mathrm{e}}}\phi }+J_{{\mathrm{i}}\phi }\), directly contributes to the magnetic field \(B_{\mathrm{c}}\) generated at the center. The azimuthal electron current density \(J_{{{\mathrm{e}}}\phi }\) dynamically evolves around the center over the distance approximately equal to the local Debye length \(\lambda _{{\mathrm{De}}}\sim 100-150\) nm (Fig. 3c). According to Faraday’s law, \(c\nabla \times {{\varvec{E}}}=-\dot{{\varvec{B}}}\), when \(B_{\mathrm{c}}\) reaches its peak, the displacement current (\(\propto \partial E_\phi /\partial t\)) becomes substantially small. Then, \(B_{\mathrm{c}}\) is given as the sum, \(B_{\mathrm{c}}=B_{\mathrm{ce}}+B_{\mathrm{ci}}\), where \(B_{\mathrm{ce}}=(4\pi /c)\int ^\infty _0 J_{{{\mathrm{e}}}\phi }\mathrm{d}r\) and \(B_{\mathrm{ci}}=(4\pi /c)\int ^\infty _0 J_{{\mathrm{i}}\phi } \mathrm{d}r\) are the contributions from electrons and ions, respectively. Due to the high mobility of electrons, the effect of electron currents on the magnetic field generation dominates over that of ion currents. MTI simulations indicate that \(B_{\mathrm{ce}}/B_{\mathrm{ci}}\sim 3-4\) or equivalently \(B_{\mathrm{c}}/B_{\mathrm{ci}}\sim 4-5\) is kept nearly constant. For example, \(B_{\mathrm{c}}\simeq 0.95\) MT and \(B_{\mathrm{ce}}\simeq 0.71\) MT are derived at \(\tau =105\) fs from Fig. 3c,d, which correspond to \(B_{\mathrm{c}}\simeq 4 B_{\mathrm{ci}}\).
Model
Here, we describe the ion dynamics in terms of a semi-analytical model and demonstrate that it forms the basis of the whole system. The time origin matters when comparing the model to the simulation results. To avoid confusion, hereafter, we employ the time variable, t, instead of \(\tau\) used for the simulation. Suppose that a planar plasma is held at rest in a half-infinitely stretched region \(-\infty <x\le 0\) for \(t\le 0\), which is composed of uniform cold ions and hot electrons with densities \(n_{\mathrm{i}}\) and \(n_{{\mathrm{e}}}\), respectively. We postulate that the plasma is charge neutral, i.e., \(Zn_{\mathrm{i}}=n_{{\mathrm{e}}}\). In addition, hot electron temperature \(T_{{\mathrm{e}}}\) is assumed to be constant both spatially and temporally due to the high conductivity. Once the boundary between the vacuum and plasma is set free at \(t=0\), the plasma begins to expand into the vacuum. The ion motion is governed by the following hydrodynamic system describing the mass and momentum conservation as
where \(n_{\mathrm{i}}(x, t)\) and \(v_{\mathrm{i}}(x, t)\) are the number density and the velocity of the ions, respectively. Grevich et al.49 found a self-similar solution to the above system, where the physical quantities are expressed in terms of a single dimensionless coordinate defined by \(\xi = x/c_{\mathrm{s}}t \,(\ge -1)\) in the forms of \(n_{\mathrm{i}}=n_{{\mathrm{i0}}} {\mathrm{e}}^{-\xi -1}\) and \(v_{\mathrm{i}}= (\xi +1)c_{\mathrm{s}}\). Under the self-similar solution, the plasma expands to the right supersonically for \(x>0\) or \(\xi >0\), while the rarefaction wave propagates to the left at the sound speed \(c_{\mathrm{s}}\), corresponding to the path, \(\xi =-1\).
The two physical ingredients, collisionless ions and isothermal electrons, provide insight to harness Grevich’s self-similar solution as a useful approximation and to describe the kinetic behavior of the ions. To accomplish this, a geometrical modification needs to be added to the self-similar solution. The resultant system behaves such that individual fluid elements can penetrate each other in cylindrically converging and diverging processes.
Suppose that an ion with mass \(m_{\mathrm{i}}\) and ionization state Z is moving at a constant speed \(v_{\mathrm{i}}\) on the xy-plane in a uniform magnetic field \({{\varvec{B}}}_0\), which is parallel to the z-axis. The ion draws a circular orbit with a Larmor radius \(R_{\mathrm{L}}=m_{\mathrm{i}}v_{\mathrm{i}}c/ZeB_0\), where \(B_0=|{{{\varvec{B}}}}_0|\). If the position and velocity of the ion are specified at \(t=0\) to be \((x,y)=(R_0,0)\) and \(({\dot{x}},{\dot{y}})=(-v_{\mathrm{i}},0)\), respectively, the ion moves on the circle, \((x-R_0)^2+(y-R_{\mathrm{L}})^2=R_{\mathrm{L}}^2\).
Here, it is useful to introduce cylindrical coordinates, \(r=\sqrt{x^2+y^2}\) and \(\phi =\tan ^{-1}(y/x)\). The ion path s along its Larmor circle is measured with the distance from the initial point \((x,y)=(R_0,0)\) or with the polar angle \(\theta =\sin ^{-1}[(R_0-x)/R_{\mathrm{L}}]\) pivoting around the guiding center \((x,y)=(R_0, R_{\mathrm{L}})\), as illustrated in Fig. 4a. It should be noted that Fig. 4a is not to scale. The dimensionless coordinate of the self-similar solution is then redefined in terms of s and \(\theta\) as \(\xi =s/c_{\mathrm{s}}t= R_{\mathrm{L}}\theta /c_{\mathrm{s}}t\). Note that \(v_{\mathrm{i}}\) and \(R_{\mathrm{L}}\) are functions of \(\xi\). Consequently, Grevich’s self-similar solution for a planar system is reformed for a cylindrical system as
where \(v_{\mathrm{ir}}\) and \(v_{{\mathrm{i}}\phi }\) denote the radial and azimuthal component of the ion velocity, respectively. The reformed set, Eqs. (3) and (4), rigidly satisfies the mass conservation law for a cylindrical geometry such that the factor \(R_0/r\) in Eq. (3) explains the geometrical accumulation effect. The minus and plus signs of the double sign in Eq. (4) correspond to the converging and diverging phases, respectively. The relation between \(v_{\mathrm{ir}}\) and \(v_{{\mathrm{i}}\phi }\) can be understood by considering the simplified physical picture of a single fast ion approaching the center along a straight line, \(y=R_{\mathrm{H}}\), with a constant speed \(v_0\) at \(r=\infty\), i.e., \((v_{\mathrm{ir}}, v_{{\mathrm{i}}\phi })=(-v_0, 0)\). The ion passes the origin \((x, y)=(0, 0)\) at the shortest distance \(r=R_{\mathrm{H}}\), when the velocities replace each other, i.e., \((v_{\mathrm{ir}}, v_{{\mathrm{i}}\phi })=(0, v_0)\). Therefore, the higher the implosion velocity of an ion, the higher the current and resultant magnetic fields around the center, i.e., \(B_{\mathrm{z}}\propto J_{{\mathrm{i}}\phi }=Zev_0 R_{\mathrm{H}}/r\).
Although Grevich’s solution gives a simple physical picture of plasma expansion into a vacuum, it lacks important information such as the location of ion front \(x_{\mathrm{f}}\). In fact, Grevich’s solution gives an infinite propagation speed of the ion front, i.e., \({\dot{x}}_{\mathrm{f}}\rightarrow \infty\) as \(\xi \rightarrow \infty\). Assuming that the plasma expands adiabatically, a reasonable approximation for the dimensionless coordinate of the ion front \(\xi _{\mathrm{f}}\) is obtained such that the plasma front expands at the speed \({\dot{x}}_{\mathrm{f}}=2(\gamma -1)^{-1}c_{\mathrm{s}}\)50, where \(\gamma\) denotes the adiabatic index. Meanwhile, the self-similar solution based on the isothermal assumption gives the speed of a fluid element at \(\xi =\xi _{\mathrm{f}}\) as \({\dot{x}}_{{\mathrm{f}}}=(\xi _{\mathrm{f}}+1)c_{\mathrm{s}}\). Equating the two speeds gives \(\xi _{\mathrm{f}}=(3-\gamma )/(\gamma -1)\). In particular, the adiabatic index for the relativistic electrons is \(\gamma =4/3\)50, yielding \(\xi _{\mathrm{f}}=5\). This result well explains \(\xi _{\mathrm{f}}\simeq 5.5\) obtained from the simulation (Figs. 2 and 4b).
Figure 4b shows the \(r-t\) diagram obtained from the reformed self-similar system, under the conditions in Figs. 2 and 3, where the curves correspond to different values of \(\xi\). The time origin of the model corresponding to \(\tau =12\) fs is chosen such that the cavity-collapse timings coincide with each other on the horizontal axes. This can be confirmed by the red dashed curve, which shows the trajectory of the innermost ions at an early stage of implosion according to the EPOCH simulation (Fig. 2). Combining the curves in Fig. 4b and the density profile given by Eq. (3) leads to the dashed curves in Fig. 2 as the model predictions.
The Larmor hole radius \(R_{\mathrm{H}}\) is obtained from the geometrical consideration under \(R_{\mathrm{H}}\ll R_0\ll R_{\mathrm{L}}\) to be \(R_{\mathrm{H}}\simeq R_0^2/2R_{\mathrm{L}}\), which is explicitly rewritten as
where \(\xi _{\mathrm{c}}(t)=R_0/c_{\mathrm{s}}t\) corresponds to the ions passing by the target center at time t. The azimuthal ion current, \(J_{{\mathrm{i}}\phi }=Zen_{\mathrm{i}} v_{{\mathrm{i}}\phi }\), is then given with the help of Eqs. (3) and (4) by
The spatial profile of the ion current has a maximum \(J_{\mathrm{H}}(t)\) at the Larmor hole rim \(r=R_{\mathrm{H}}\) to spatially decay at the rate \(r^{-2}\) for \(r\ge R_{\mathrm{H}}\).
In Eq. (7), the factor \(R_0/R_{\mathrm{H}}\) explains the cylindrical accumulation effect. Consequently, the ion current contribution to the central magnetic field follows \(B_{{\mathrm{ci}}}(t)=(4\pi /c) \int ^\infty _{R_{\mathrm{H}}} J_{{\mathrm{i}}\phi }(r,t) \mathrm{d}r = (4\pi /c) R_{\mathrm{H}} J_{\mathrm{H}}(t)\). The space-integrated quantity \(B_{\mathrm{ci}}(t)\) is independent of \(R_{\mathrm{H}}\) itself. With time t, the numerical factor, \((\xi _{\mathrm{c}}+1){\mathrm{e}}^{-\xi _{\mathrm{c}}-1}\), in Eq. (7) monotonically increases, and \(\xi _{{\mathrm{c}}}(t)\) decreases from its initial value \(\xi _{\mathrm{c}}(\tau =70\) fs) \(=\xi _{\mathrm{f}}=5.5\). Although the factor asymptotically approaches its maximum, \({\mathrm{e}}^{-1}=0.37\), with \(t\rightarrow \infty\) or \(\xi _{\mathrm{c}}\rightarrow 0\), a cut-off value of \(\xi _{\mathrm{c}}\) exists for the physical reason described below.
According to the EPOCH simulations, after the cavity collapse at \(\tau =\tau _{\mathrm{c}}(\simeq 70\) fs), the magnetic field grows at the center for a period of \(4-6\) ion-oscillations, i.e., \(\Delta \tau \sim (4-6) \times \tau _{\mathrm{cyc}} \sim 40 - 60\) fs with the cycle \(\tau _{\mathrm{cyc}}=2\pi /\omega _{\mathrm{pi}}\approx\) 10 fs for the case in Figs. 2 and 3. This corresponds to \(\tau \sim 110-130\) fs or \(\xi _{\mathrm{c}}\sim\) 3 (Fig. 4b). After the duration \(\Delta \tau\), the core periodically emits outgoing density waves at a frequency \(\omega _{\mathrm{pi}}\). These waves carry a portion of the central plasma energy, as seen in the double-humped structure of the ion density profile for \(\tau =110-115\) fs in Fig. 3a. In fact, \(B_{\mathrm{c}}(t)\) begins to decay coherently with the first emission of the density wave (Fig. 3a,d). Since the model does not consider this emission process, we estimate the maximum magnetic field by limiting the growth at the peak time \(\tau _{\mathrm{peak}}=\tau _{\mathrm{c}}+\Delta \tau\). This corresponds to \(\xi _{\mathrm{c}}\sim 3\). Recalling the observed constancy, \(B_{\mathrm{c}}\simeq 4B_{\mathrm{ci}}\), leads to its maximum value \(B_{\mathrm{c.max}}\) as
Thus, \(B_{\mathrm{c.max}}\) is proportional to the total ion flux emitted from the inner surface of the microtube, i.e., \(B_{\mathrm{c.max}}\propto Zn_{{\mathrm{i0}}}c_{\mathrm{s}}R_0\) (recall \(c_{\mathrm{s}}\propto \sqrt{Z T_{\mathrm{e}}/A}\)).
Figure 5 shows the results of about three dozen EPOCH simulations (solid circles) for \(B_{\mathrm{c.max}}\) as a function of \(\Psi\) defined in Eq. (8). The straight black line denotes the model prediction. Each simulation result corresponds to a subset with the key parameters, \((B_0, n_{{\mathrm{i0}}}, R_0, {\mathcal {E}}_{{\mathrm{he.av}}})\). Their composition is chosen rather randomly over the ranges, \(B_0=1-10\) kT, \(n_{{\mathrm{i0}}}= 5\times 10^{22}-2\times 10^{23}\)\(\hbox {cm}^{-3}\), \(R_0=1-3\,\mu \hbox {m}\), and \({\mathcal {E}}_{{\mathrm{he.av}}}=5-15\) MeV, while \(A=12\) and \(Z=6\) are fixed. Despite the random choices, the overall simulation results are smoothly linked in a systematic manner by the dashed curves parameterized by \(B_0\). This demonstrates the physical significance of the parameter \(\Psi\) as an essential measure of the magnetic-field generation in the present scheme.
There is a threshold relation between \(B_0\) and \(\Psi\) such that the simulation results and the model line agree well. For example, for \(B_0\gtrsim 6\) kT and \(\Psi \lesssim 2.5\), the model well reproduces the overall behavior of the simulation results. The physical reason why these curves overlap with the model line is as follows. Although the individual trajectories of charged particles are deformed to radially shift outward due to higher \(B_0\) and smaller Larmor radius \(R_{\mathrm{L}}\) (Fig. 4a), the integrated currents and consequently the magnetic field, \(\int J_{{\mathrm{i}}\phi }\mathrm{d}r \propto \int J_{\mathrm{e\phi }}\mathrm{d}r \propto B_{{\mathrm{c}}}\), are unchanged.
With \(B_0=4\) kT, the difference between the simulation and the model begins to increase for \(\Psi \gtrsim 1.6\). Moreover, for \(B_0<3\) kT, the behaviors of the simulation results are unpredictable by the model. In particular, with \(B_0=\) 2 kT, the temporal evolution of the system becomes unstable. Although it initially behaves in the reverse polarity regime (\(B_{\mathrm{c.max}}<0\)), it eventually turns into the forward polarity regime (\(B_{\mathrm{c.max}}>0\)). This phenomenon is labeled as “polarity switching” in Fig. 5. The polarity switching suddenly occurs on the timescale of several femtoseconds, when the electron current distribution surrounding the target center evolves very quickly in a complex manner. One of the potential causes for this phenomenon seems to be the existence of an electron-rich space at the center, which is omitted in the model assuming that \(R_{\mathrm{H}}\) is so large (Eq. 5) that electrons are evacuated from the Larmor hole.
Practical simulation with laser-plasma interaction
In this section, we perform proof-of-principle EPOCH simulations to demonstrate that strong magnetic fields can still be produced, when the uniform hot electron population previously assumed by the M–J distribution is replaced with a realistic laser-plasma interaction45. These simulations reproduce salient features of the MTI process described in the previous sections. Note that although the EPOCH code used here is somewhat customized with the same core modules as recent releases, the results provided below should be reproducible using the latest release.
We consider an isolated target, which consists of an initially cold, fully ionized charge-neutral carbon-electron plasma with an initial ion density \(n_{{\mathrm{i0}}}=3\times 10^{22}\)\(\hbox {cm}^{-3}\) and electron density \(n_{\mathrm{e0}}=6 n_{{\mathrm{i0}}}\). We have reduced the target density by a factor of \(\sim 3\) relative to the case given in Figs. 2 and 3 to mitigate the computational cost associated with PIC simulations of the laser−plasma interaction. The target’s outer cross-section is a square with 12-\(\upmu \hbox {m}\)-long sides. The inner radius of the microtube is \(R_0=3\, \upmu \hbox {m}\). This target is irradiated on each of the four outer sides by a large-spot (spatially plane wave) laser pulse with a wavelength of \(\lambda _{\mathrm{L}}=0.8 \,\upmu \hbox {m}\), a total duration (\(\sin ^2\) temporal shape in |E|) of \(\tau _{\mathrm{L}}=100\) fs, and a peak intensity of \(I_{\mathrm{L}}=10^{21}\) W/\(\hbox {cm}^{2}\). The pulses are co-timed such that the peaks of all four pulses interact with the target surface simultaneously. The plasma is modeled with a resolution of 100 cells/\(\upmu \hbox {m}\) and 200 particles/cell for carbon ions and 400 particles/cell for electrons, using the cubic B-spline particle shape included in EPOCH. The full size of the simulation box is 22 \(\upmu \hbox {m }\times \ 22\ \upmu \hbox {m}\).
In practical laser-driven configurations, the laser-plasma interaction causes the hot electron population driving the implosion to depart from the conditions of spatial uniformity and temperature isotropy, which are assumed in the derivation of the maximum magnetic field given in Eq. (8). The energetic electron spectrum has multiple energy components and differs from a single-temperature M-J distribution (Fig. 6a). Despite this departure from the conditions assumed in the previous sections, we still observe strong magnetic field generation with similar features to the single-temperature case. Due to the spatial non-uniformities, strong magnetic fields with spatially varying signs can be generated in small regions of the implosion volume even without the presence of any seed magnetic field. However, the addition of a seed magnetic field (\(B_0=6\) kT) increases both the maximum amplitude of the magnetic field produced and the spatial volume over which it maintains the same sign (Fig. 6b).
Figure 7 shows the detailed temporal evolution of the physical quantities, which are summarized in Fig. 6b. The magnetic field generation in the laser-driven case occurs in two stages, where the majority of the magnetic field generation occurs during the first stage. During the implosion, substantial anisotropy in the ion current crossing through the center of the microtube generates a strong magnetic field around the center (\(r<0.3\,\mu \hbox {m}\), Stage 1 in Fig. 7a,c). In the simulations, the magnitude of this magnetic field increases by a factor of \(\gtrsim 2\) upon applying \(B_0=6\) kT through the MTI process (Fig. 7a). Later, this central magnetic field is further amplified by electrons undergoing \(E\times B\)-directed motion as the central ion population explodes outward (Stage 2 in Fig. 7a,c). Unlike Stage 1, which occurs over approximately 30 fs and agrees well with the MTI process described earlier, Stage 2 can persist for well over 100 fs. Figure 7 does not capture the end of this stage due to the computational cost of these simulations. However, simulations performed with plastic targets suggest the magnetic field can be slowly amplified over hundreds of femtoseconds. In the presence of the 6-kT seed, the first stage, which includes the MTI amplification process, generates a \(\sim 100\) kT magnetic field over \(r\lesssim 0.3\,\upmu \hbox {m}\) in approximately 20 fs, while the second stage amplifies this magnetic field to \(\sim 120\) kT over approximately 50 fs and increases the size of the central spot to a radius of \(\sim 0.5\,\upmu \hbox {m}\).
Discussion
We here briefly discuss laser requirements for MTI. To achieve MT-order magnetic fields experimentally, a rough estimate assuming a pulse duration of \(\sim 30\) fs suggests that a laser system with a pulse energy of \(0.1 - 1\) kJ and a total power of \(10-100\) PW is required. Such high-power laser performance is accessible by today’s laser technology51, 52. Meanwhile, fundamental studies, including proof-of-principle experiments, should be feasible using substantially smaller laser systems. Unlike for ultrathin targets with nm-scale thicknesses, MTI targets are significantly less sensitive to laser contrast due to the micron-thick wall, while beam co-timing should be within 10 − 20 fs for implosions with a timescale of \(\sim 100\) fs.
Detecting MT-order magnetic fields inside a plasma presents a challenge for conventional techniques that rely on charged particle sources. In anticipation of achieving ultrahigh magnetic fields, there have been efforts to develop other techniques to infer the existence of strong B-fields inside a dense plasma in use of, for example, an XFEL photon beam with Faraday rotation effect17, 20, 24 and spin-polarized neutrons53.
We roughly estimate the minimum number of beams \(n_{\mathrm{B}}\) from a uniformity point of view. For simplicity our discussion here is limited to the cross-sectional dimensions. Nonuniformity of the imploding ion front is directly influenced by that of hot electron density, which comprises the local electron sheath (Fig. 1b). Hot electrons produced on the laser-irradiated surface go back and forth between the target surface and the cavity wall with an in-between distance \(\Delta R=R_1-R_0\), where \(R_1\) is the initial target radius. This hot electron transport is regarded as a kind of random-walk diffusion process. The nonuniformity on the outer surface should diminish on the cavity wall via this diffusion process along the lateral direction. As is well documented, the diffusion distance is given by \(L_{\mathrm{d}} \sim \sqrt{N}\Delta R\), where \(N\sim c\Delta t/\Delta R\) stands for the reflection number between the two surfaces during the implosion time \(\Delta t\). Consequently, \(n_{\mathrm{B}}\gtrsim 2\pi R_0/2L_{\mathrm{d}}\sim 2\) (i.e., two-sided illumination) when employing for example \(R_0=3\,\mu \hbox {m}\), \(\Delta R=2\,\mu \hbox {m}\), and \(\Delta t\sim 50\) fs (Fig. 2). It should be noted that controlling both the temporal and spacial profiles of the incident laser pulses also plays a crucial role to improve the implosion uniformity54, 55.
In summary, we propose a novel concept called MTI, which produces MT-order magnetic fields using intense laser pulses. Key physical elements of MTI are imploding ion fluxes with quasi-relativistic speeds and the resultant ultrahigh spin currents running around the nanometer-scale Larmor hole at the center. The spin currents are due to the collective motion of the imploding ions and the accompanying relativistic electrons. The pre-seeded magnetic field \(B_0\) significantly influences the magnetism of the plasma. For example, the forward (reverse) polarity appears in the domain of higher (lower) \(B_0\). Polarity switching is an extraordinary phenomenon, which requires further investigation. The scaling law for the maximum magnetic field \(B_{\mathrm{c.max}}\) is obtained as a function of \(B_0\) and the total ion flux emitted from the inner surface of microtube \(\Psi\). With the realistic laser-plasma interaction taken into account, strong magnetic field generation has been demonstrated as a proof-of-principle of MTI.
References
Sakharov, A. D. et al. Magnetic cumulation. Sov. Phys. Dokl. 165, 65 (1965).
Fowler, C. M., Garn, W. B. & Caird, R. S. Production of very high magnetic fields by implosion. J. Appl. Phys. 31, 588 (1960).
Cnare, E. C. Magnetic flux compression by magnetically imploded metallic foils. J. Appl. Phys. 37, 3812 (1966).
Daido, H. et al. Generation of a strong magnetic field by an intense CO2 laser pulse. Phys. Rev. Lett. 56, 846 (1986).
Felber, F. S. et al. Compression of ultrahigh magnetic fields in a gas-puff Z pinch. Phys. Fluids 31, 2053 (1988).
Velikovich, A. L., Gol’berg, S. M., Liberman, M. A. & Felber, F. S. Hydrodynamics of compression of a plasma with a frozen-in magnetic field by a thin cylindrical wall. Sov. Phys. JETP 61, 261 (1985).
Miura, N. et al. Recent advances in megagauss physics. Physica B 216, 153 (1996).
Pegoraro, F. et al. Magnetic fields from high-intensity laser pulses in plasmas. Plasma Phys. Control. Fusion 39, B261 (1997).
Courtois, C. et al. Creation of a uniform high magnetic-field strength environment for laser-driven experiments. J. Appl. Phys. 98, 054913 (2005).
Gotchev, O. V. et al. Laser-driven magnetic-flux compression in high-energy-density plasmas. Phys. Rev. Lett. 103, 215004 (2009).
Knauer, J. P. et al. Compressing magnetic fields with high-energy lasers. Phys. Plasmas 17, 056318 (2010).
Fujioka, S. et al. Kilotesla magnetic field due to a capacitor-coil target driven by high power laser. Sci. Rep. 3, 1170 (2013).
Santos, J. J. et al. Laser-driven platform for generation and characterization of strong quasi-static magnetic fields. New. J. Phys. 17, 083051 (2015).
Tikhonchuk, V. T. et al. Quasi-stationary magnetic fields generation with a laser-driven capacitor-coil assembly. Phys. Rev. E 96, 023202 (2017).
Nakamura, D. et al. Record indoor magnetic field of 1200 T generated by electromagnetic flux-compression. Rev. Sci. Instrum. 89, 095106 (2018).
Lécz, Z. & Andreev, A. Laser-induced extreme magnetic field in nanorod targets. New J. Phys. 20, 033010 (2018).
Wang, T., Toncian, T., Wei, M. S. & Arefiev, A. V. Structured targets for detection of Megatesla-level magnetic fields through Faraday rotation of XFEL beams. Phys. Plasmas 26, 013105 (2019).
Park, J. et al. Ion acceleration in laser generated megatesla magnetic vortex. Phys. Plasmas 26, 103108 (2019).
Sagdeev, R.Z. Cooperative phenomena and shock waves in collisionless plasmas. Rev. Plasma Phys. 4, 23 (Consultants Bureau, New York, 1966).
Arefiev, A. V., Toncian, T. & Fiksel, G. Enhanced proton acceleration in an applied longitudinal magnetic field. New J. Phys. 18, 105011 (2016).
Stark, D. J., Toncian, T. & Arefiev, A. V. Enhanced multi-MeV photon emission by a laser-driven electron beam in a self-generated magnetic field. Phys. Rev. Lett. 116, 185003 (2016).
Bailly-Grandvaux, M. et al. Guiding of relativistic electron beams in dense matter by laser-driven magnetostatic fields. Nat. Comm. 9, 102 (2018).
Nakatsutsumi, M. et al. Self-generated surface magnetic fields inhibit laser-driven sheath acceleration of high-energy protons. Nat. Commun. 9, 280 (2018).
Weng, S. et al. Extreme case of Faraday effect: Magnetic splitting of ultrashort laser pulses in plasmas. Optica 4, 1086 (2017).
Santangelo, A. et al. The first X-ray spectrum with four cyclotron harmonic features. Astro. Phys. J. Lett. 523, L85 (1999).
Gourgouliatos, K. & Cumming, A. Hall effect in neutron star crusts: Evolution, endpoint and dependence on initial conditions. MNRAS 438, 1618 (2014).
Kopp, R. A. & Pneuman, G. W. Magnetic reconnection in the corona and the loop prominence phenomenon. Solar Phys. 50, 85 (1976).
Masuda, S. et al. A loop-top hard x-ray source in a compact solar flare as evidence for magnetic reconnection. Nature 371, 495 (1994).
Gilch, P. et al. Magnetic field effect on picosecond electron transfer. Science 281, 982 (1998).
Lai, D. Matter in strong magnetic fields. Rev. Mod. Phys. 73, 629 (2001).
Herlach, F. & Miura, N. (eds) High Magnetic Fields: Science and Technology (World Scientific Pub Co Inc, Singapore, 2003).
Ribeyre, X. et al. Pair creation in collision of \(\gamma\)-ray beams produced with high-intensity lasers. Phys. Rev. E 93, 013201 (2016).
Jansen, O. et al. Leveraging extreme laser-driven magnetic fields for gamma-ray generation and pair production. Plasma Phys. Control. Fusion 60, 054006 (2018).
Koga, J. K., Murakami, M., Areviev, A. V. & Nakamiya, Y. Probing and possible application of the QED vacuum with micro-bubble implosions induced by ultra-intense laser pulses. Matter Radiat. Extremes 4, 034401 (2019).
Slutz, S. A. et al. High-gain magnetized inertial fusion. Phys. Rev. Lett. 108, 025003 (2012).
Wang, W. M., Gibbon, P., Sheng, Z. M. & Li, Y. T. Magnetically assisted fast ignition. Phys. Rev. Lett. 114, 015001 (2015).
Honrubia, J., Morace, A. & Murakami, M. On intense proton beam generation and transport in hollow cones. Matter Radiat. Extremes 2, 28 (2017).
Santos, J. J. et al. Laser-driven strong magnetstatic fields with applications to charged beam transport and magnetized high-density physics. Phys. Plasmas 25, 056705 (2018).
Wilks, S. C. et al. Energetic proton generation in ultra-intense laser-solid interactions. Phys. Plasmas 8, 542 (2001).
Norreys, P. A. et al. Observation of a highly directional \(\gamma\)-ray beam from ultrashort, ultraintense laser pulse interactions with solids. Phys. Plasmas 6, 2150 (1999).
Wilks, S. C., Kruer, W. L., Tabak, M. & Langdon, A. B. Absorption of ultra-intense laser pulses. Phys. Rev. Lett. 69, 1383 (1992).
Mora, P. Plasma expansion into a vacuum. Phys. Rev. Lett. 90, 185002 (2003).
Fuchs, J. et al. Laser-driven proton scaling laws and new paths towards energy increase. Nat. Phys. 2, 48 (2006).
Murakami, M. & Basko, M. M. Self-similar expansion of finite-size non-quasi-neutral plasmas into vacuum: Relation to the problem of ion acceleration. Phys. Plasmas 13, 012105 (2006).
Arber, T. D. et al. Contemporary particle-in-cell approach to laser-plasma modeling. Plasma Phys. Control. Fusion 57, 113001 (2015).
Jüttner, F. Das Maxwellsche Gesetz der Geschwindigkeitsverteilung in der Relativtheorie. Ann. Phys. 339, 856–882 (1911).
Bezzerides, B., Gitomer, S. J. & Forslund, D. W. Randomness, Maxwellian distributions, and resonance absorption. Phys. Rev. Lett. 44, 651 (1980).
Kluge, T., Bussmann, M., Schramm, U. & Cowan, T. E. Simple scaling equations for electron spectra, currents, and bulk heating in ultra-intense short-pulse laser-solid interaction. Phys. Plasmas 25, 073106 (2018).
Grevich, A. V., Pariskaya, L. V. & Pitaevskii, L. P. Self-similar motion of rarefied plasma. Sov. Phys. JETP 22, 449 (1966).
Landau, L.D. & Lifshitz, E.M. Course in Thoretical Physics, Vol. 6: Fluid Mechanics (Pergamon Press, Oxford, 1959).
Shen, B. et al. Exploring vacuum birefringence based on a 100 PW laser and an X-ray free electron laser beam. Plasma Phys. Control. Fusion 60, 044002 (2018).
Danson, C.N. et al. Petawatt and exawatt class lasers worldwide. High Power Laser Sci. Eng. 7, 03000e54 (2019).
Kardjilov, N. et al. Imaging with polarized neutrons. J. Imaging 4, 23 (2018).
Murakami, M. Analysis of radiation symmetrization in hohlraum targets. Nucl. Fusion 32, 1715 (1992).
Murakami, M. & Nishi, D. Optimization of laser illumination configuration for directly driven inertial confinement fusion. Matter Radiat. Extremes 2, 55 (2017).
John, T. et al. XSEDE: Accelerating scientific discovery. Comput. Sci. Eng. 16, 62 (2014).
Chourasia, A. et al. Proceedings of the Practice and Experience in Advanced Research Computing 2017 on Sustainability, Success and Impact, PEARC17 (New York, NY, USA) 69:1 (ACM, 2017).
Acknowledgements
M.M. was supported by the Japan Society for the Promotion of Science (JSPS). J.J.H. was supported by the EUROfusion grant ENR-IFE19.CCFE-01-T001-D001 and the research grant RTI2018-098801-B-I00 of the Spanish Ministry for Research. J.J.H. thankfully acknowledges the computer resources at MareNostrum and the technical support provided by the Barcelona HPC of the Spanish Supercomputing Network and the CeSViMa HPC of the UPM. The work by S.V.B. was supported by the project High Field Initiative (No. CZ.02.1.01/0.0/ 0.0/15_003/0000449) from the European Regional Development Fund. The work by K.W. and A.V.A was supported by the DOE Office of Science under Grant No. DE-SC0018312 and used HPC resources of the Texas Advanced Computing Center (TACC) at the University of Texas at Austin and the Extreme Science and Engineering Discovery Environment (XSEDE)56, which is supported by National Science Foundation grant number ACI-1548562. Data collaboration was supported by the SeedMe2 project57 (http://dibbs.seedme.org).
Author information
Authors and Affiliations
Contributions
M.M. conceived the study. Designing and performing the PIC simulations are contributed by J.J.H. on Figs. 2, 3, and 5, and by K.W. and A.V.A on Figs. 6 and 7. M.M. and S.V.B. developed the analytical model. M.M. wrote the paper. All authors reviewed the whole work, and approved the manuscript.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Publisher's note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Murakami, M., Honrubia, J.J., Weichman, K. et al. Generation of megatesla magnetic fields by intense-laser-driven microtube implosions. Sci Rep 10, 16653 (2020). https://doi.org/10.1038/s41598-020-73581-4
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41598-020-73581-4
- Springer Nature Limited
This article is cited by
-
Generation of intense magnetic wakes by relativistic laser pulses in plasma
Scientific Reports (2023)
-
Nanowire implosion under laser amplified spontaneous emission pedestal irradiation
Scientific Reports (2023)
-
Generation, measurement, and modeling of strong magnetic fields generated by laser-driven micro coils
Reviews of Modern Plasma Physics (2023)
-
Laser cluster interaction in ambient magnetic fields for accelerating electrons in two stages without external injection
Scientific Reports (2022)
-
Magnetic field amplification driven by the gyro motion of charged particles
Scientific Reports (2021)