Skip to main content
Log in

Unravelling the convoluted and dynamic interphasial mechanisms on Li metal anodes

  • Letter
  • Published:

From Nature Nanotechnology

View current issue Submit your manuscript

Abstract

Accurate understanding of the chemistry of solid-electrolyte interphase (SEI) is key to developing new electrolytes for high-energy batteries using lithium metal (Li0) anodes1. SEI is generally believed to be formed by the reactions between Li0 and electrolyte2,3. However, our new study shows this is not the whole story. Through synchrotron-based X-ray diffraction and pair distribution function analysis, we reveal a much more convoluted formation mechanism of SEI, which receives considerable contributions from electrolyte, cathode, moisture and native surface species on Li0, with highly dynamic nature during cycling. Using isotope labelling, we traced the origin of LiH to electrolyte solvent, moisture and a new source: the native surface species (LiOH) on pristine Li0. When lithium accessibility is very limited as in the case of anode-free cells, LiOH develops into plate-shaped large crystals during cycling. Alternatively, when the lithium source is abundant, as in the case of Li||NMC811 cells, LiOH reacts with Li0 to form LiH and Li2O. While the desired anion-derived LiF-rich SEI is typically found in the concentrated electrolytes or their derivatives, we found it can also be formed in low-concentration electrolyte via the crosstalk effect, emphasizing the importance of formation cycle protocol and opening up opportunities for low-cost electrolyte development.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1: Characterization method illustration and its advantages.
Fig. 2: Investigation of hydrogen source for LiH.
Fig. 3: Cathode to anode crosstalk and formation cycle protocol optimization.
Fig. 4: Evolution pathways of LiOH.

Similar content being viewed by others

Data availability

The data that support the findings of this study are available within the paper and its Supplementary Information. Any other data are available from the corresponding author on request.

References

  1. Cao, X., Jia, H., Xu, W. & Zhang, J.-G. Review—localized high-concentration electrolytes for lithium batteries. J. Electrochem. Soc. 168, 010522 (2021).

    Article  CAS  Google Scholar 

  2. Shadike, Z. et al. Engineering and characterization of interphases for lithium metal anode. Chem. Sci. 13, 1547–1568 (2022).

    Article  CAS  Google Scholar 

  3. Wu, H., Jia, H., Wang, C., Zhang, J. G. & Xu, W. Recent progress in understanding solid electrolyte interphase on lithium metal anodes. Adv. Energy Mater. 11, 2003092 (2021).

    Article  CAS  Google Scholar 

  4. Xu, W. et al. Lithium metal anodes for rechargeable batteries. Energy Environ. Sci. 7, 513–537 (2014).

    Article  CAS  Google Scholar 

  5. Niu, C. et al. Balancing interfacial reactions to achieve long cycle life in high-energy lithium metal batteries. Nat. Energy 6, 723–732 (2021).

    Article  CAS  Google Scholar 

  6. Niu, C. et al. High-energy lithium metal pouch cells with limited anode swelling and long stable cycles. Nat. Energy 4, 551–559 (2019).

    Article  CAS  Google Scholar 

  7. Li, Y. et al. Atomic structure of sensitive battery materials and interfaces revealed by cryo–electron microscopy. Science 358, 506 (2017).

    Article  CAS  Google Scholar 

  8. Wang, X. et al. New insights on the structure of electrochemically deposited lithium metal and its solid electrolyte interphases via cryogenic TEM. Nano Lett. 17, 7606–7612 (2017).

    Article  CAS  Google Scholar 

  9. Fang, C. et al. Quantifying inactive lithium in lithium metal batteries. Nature 572, 511–515 (2019).

    Article  CAS  Google Scholar 

  10. Zachman, M. J., Tu, Z., Choudhury, S., Archer, L. A. & Kourkoutis, L. F. Cryo-STEM mapping of solid-liquid interfaces and dendrites in lithium-metal batteries. Nature 560, 345–349 (2018).

    Article  CAS  Google Scholar 

  11. Shadike, Z. et al. Identification of LiH and nanocrystalline LiF in the solid-electrolyte interphase of lithium metal anodes. Nat. Nanotechnol. 16, 549–554 (2021).

    Article  CAS  Google Scholar 

  12. Xu, G. et al. The formation/decomposition equilibrium of LiH and its contribution on anode failure in practical lithium metal batteries. Angew. Chem. Int. Ed. 60, 7770–7776 (2021).

    Article  CAS  Google Scholar 

  13. Xiang, Y. et al. Quantitatively analyzing the failure processes of rechargeable Li metal batteries. Sci. Adv. 7, eabj3423 (2021).

    Article  CAS  Google Scholar 

  14. Wang, C., Meng, Y. S. & Xu, K. Perspective—fluorinating interphases. J. Electrochem. Soc. 166, A5184–A5186 (2019).

    Article  CAS  Google Scholar 

  15. Fan, X. et al. Fluorinated solid electrolyte interphase enables highly reversible solid-state Li metal battery. Sci. Adv. 4, eaau9245 (2018).

    Article  CAS  Google Scholar 

  16. Suo, L. et al. Fluorine-donating electrolytes enable highly reversible 5-V-class Li metal batteries. Proc. Natl Acad. Sci. USA 115, 1156–1161 (2018).

    Article  CAS  Google Scholar 

  17. Busche, M. R. et al. Dynamic formation of a solid-liquid electrolyte interphase and its consequences for hybrid-battery concepts. Nat. Chem. 8, 426–434 (2016).

    Article  CAS  Google Scholar 

  18. Lang, S.-Y. et al. Tunable structure and dynamics of solid electrolyte interphase at lithium metal anode. Nano Energy 75, 104967 (2020).

    Article  CAS  Google Scholar 

  19. Liu, F. et al. Dynamic spatial progression of isolated lithium during battery operations. Nature 600, 659–663 (2021).

    Article  CAS  Google Scholar 

  20. Becking, J. et al. Lithium-metal foil surface modification: an effective method to improve the cycling performance of lithium-metal batteries. Adv. Mater. Interfaces 4, 1700166 (2017).

    Article  Google Scholar 

  21. Leung, K. DFT modelling of explicit solid-solid interfaces in batteries: methods and challenges. Phys. Chem. Chem. Phys. 22, 10412–10425 (2020).

    Article  CAS  Google Scholar 

  22. Yamada, Y., Wang, J., Ko, S., Watanabe, E. & Yamada, A. Advances and issues in developing salt-concentrated battery electrolytes. Nat. Energy 4, 269–280 (2019).

    Article  CAS  Google Scholar 

  23. Yu, Z. et al. Molecular design for electrolyte solvents enabling energy-dense and long-cycling lithium metal batteries. Nat. Energy 5, 526–533 (2020).

    Article  CAS  Google Scholar 

  24. Rietveld, H. A profile refinement method for nuclear and magnetic structures. J. Appl. Crystallogr. 2, 65–71 (1969).

    Article  CAS  Google Scholar 

  25. Coelho, A. A. TOPASandTOPAS-Academic: an optimization program integrating computer algebra and crystallographic objects written in C++. J. Appl. Crystallogr. 51, 210–218 (2018).

    Article  CAS  Google Scholar 

  26. Zhang, X.-Q. et al. Regulating anions in the solvation sheath of lithium ions for stable lithium metal batteries. ACS Energy Lett. 4, 411–416 (2019).

    Article  CAS  Google Scholar 

  27. Verma, P., Maire, P. & Novák, P. A review of the features and analyses of the solid electrolyte interphase in Li-ion batteries. Electrochim. Acta 55, 6332–6341 (2010).

    Article  CAS  Google Scholar 

  28. Hu, Y. Y. et al. Origin of additional capacities in metal oxide lithium-ion battery electrodes. Nat. Mater. 12, 1130–1136 (2013).

    Article  CAS  Google Scholar 

  29. Li, Z. et al. Understanding the electrochemical formation and decomposition of Li2O2 and LiOH with operando X-ray diffraction. Chem. Mater. 29, 1577–1586 (2017).

    Article  CAS  Google Scholar 

  30. Joo, S., Shim, H.-W., Choi, J.-J., Lee, C.-G. & Kim, D.-G. A method of synthesizing lithium hydroxide nanoparticles using lithium sulfate from spent batteries by 2-step precipitation method. Korean J. Met. Mater. 58, 286–291 (2020).

    Article  CAS  Google Scholar 

  31. Lorger, S., Narita, K., Usiskin, R. & Maier, J. Enhanced ion transport in Li2O and Li2S films. Chem. Commun. 57, 6503–6506 (2021).

    Article  CAS  Google Scholar 

Download references

Acknowledgements

S.T., A.C., P.K., X.-Q.Y. and E.H. at BNL are supported by the Assistant Secretary for Energy Efficiency and Renewable Energy (EERE), Vehicle Technology Office (VTO) of the US Department of Energy (DOE) through the Advanced Battery Materials Research (BMR) Program, including Battery500 Consortium under contract no. DE-SC0012704. This research used 28-ID-2 and 7-BM beamlines of the National Synchrotron Light Source II, US DOE Office of Science User Facilities operated for the DOE Office of Science by BNL under contract no. DE-SC0012704. DFT computational work used the resources of the Center for Functional Nanomaterials, a US DOE Office of Science User Facility at BNL, under contract no. DE-SC0012704. J-M.K., J.X., J.L. and X.C. at Pacific Northwest National Laboratory (PNNL) also thank support from EERE and VTO of the US DOE through the BMR program including Battery500 Consortium. The XPS were conducted in the William R. Wiley Environmental Molecular Sciences Laboratory (EMSL), a national scientific user facility sponsored by DOE’s Office of Biological and Environmental Research and located at PNNL. PNNL is operated by Battelle for US DOE under contract DE-AC05-76RL01830. The electrodes used in this study were produced at the US DOE’s CAMP (Cell Analysis, Modelling and Prototyping) Facility, Argonne National Laboratory. The CAMP Facility is fully supported by VTO, EERE of US DOE. K.X. thanks the financial aid from Joint Center of Energy Storage Research, an Energy Hub funded by US DOE, Office of Basic Energy Science.

Author information

Authors and Affiliations

Authors

Contributions

S.T., X.C. and E.H. conceived the idea and designed the experiments. B.J.P. provided NMC811 electrodes. S.T. and J.-M.K. carried out electrochemical measurements and prepared interphase samples. S.G. and H.Z. carried out the synchrotron experiments. J.-M.K., N.R., S.S. and X.C. performed the XPS measurements. X.W. did the DFT calculation. S.T., A.C., P.K. and E.H. analysed the XRD and PDF results. S.T., K.X. and E.H. wrote the manuscript with input from all the authors.

Corresponding authors

Correspondence to Xia Cao or Enyuan Hu.

Ethics declarations

Competing interests

The authors declare no competing interests.

Peer review

Peer review information

Nature Nanotechnology thanks Yong Yang, Xiqian Yu and Guanglei Cui for their contribution to the peer review of this work.

Additional information

Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Supplementary information

Supplementary Information

Supplementary Figs. 1–14, Tables 1 and 2 and Note.

Rights and permissions

Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Tan, S., Kim, JM., Corrao, A. et al. Unravelling the convoluted and dynamic interphasial mechanisms on Li metal anodes. Nat. Nanotechnol. 18, 243–249 (2023). https://doi.org/10.1038/s41565-022-01273-3

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1038/s41565-022-01273-3

  • Springer Nature Limited

This article is cited by

Navigation