Abstract
The western United States is one of Earth’s most tectonically active regions, characterized by extensive crustal deformation through intraplate earthquakes and geodetic motion. Such intracontinental deformation is usually ascribed to plate boundary forces, lithospheric body forces, and/or viscous drag from mantle flow. However, their relative importance in driving crustal deformation remains controversial due to inconsistent assumptions on crustal and mantle structures in prior estimations. Here, we utilize a fully dynamic three-dimensional modeling framework with data assimilation to simultaneously compute lithospheric and convective mantle dynamics within the western United States. This approach allows for quantitative estimations of crustal deformation while accounting for the realistic three-dimensional lithospheric structure. Our results show the critical role of the complex lithospheric structure in governing intraplate deformation. Particularly, the interaction between the asthenospheric flow and lithospheric thickness step along the eastern boundary of the Basin and Range represents a key driving mechanism for localized crustal deformation and seismicity.
Similar content being viewed by others
Introduction
The driving mechanism behind intraplate deformation remains a fundamental scientific question. One example is the western United States (WUS), which displays a broad and complex crustal deformation pattern (Fig. 1). Since the mid-Cenozoic, much of the WUS has been experiencing long-lasting crustal extension, with well-documented geological and geophysical evidence1. However, the forces driving the extensional tectonics remain debated, with proposed mechanisms broadly falling into three categories: long-range plate boundary forces2,3,4, lithospheric body forces resulting from lateral gradients of gravitational potential energy (GPE)2,3,4,5,6,7,8, and basal tractions exerted by the underlying mantle flow5,7,9,10,11,12,13. Many researchers realized that a single mechanism is insufficient to explain the observed crustal deformation1,2,3,4,5,7,9,10,11,14, but the relative importance of different mechanisms is still controversial. One key outstanding question is how the three-dimensional (3D) lithospheric structure, a feature usually simplified in previous studies, is linked to the proposed driving forces.
a Seismicity and geodetically measured crustal motion overlying the LAB depth (“Methods” section). Red dots indicate earthquake locations from 1980 to 2020, with the radius showing magnitudes (from USGS). Yellow arrows indicate crustal motion relative to the stable North American plate (in the NAM14 reference frame16) determined with GPS measurements (from GAGE/UNAVCO89). b Slab surface36,37 (the colored contours indicate depths), observed focal mechanism solutions23,24, and geophysically estimated maximum horizontal compression (SHmax) directions26 overlying the LAB depth. Black lines in both panels indicate major tectonic provinces in the WUS. The dashed lines within the Basin and Range divide it into the northern, central, and southern segments, following ref. 90. PNW Pacific Northwest, GV Great Valley, SRP Snake River Plain, B&R Basin and Range, RM Rocky Mountain, WP Wyoming Plateau, CP Colorado Plateau, RGR Rio Grande Rift.
Contemporary intraplate deformation in the WUS is evident through the observed crustal motion deviating from rigid plate rotation and widespread intraplate earthquakes. In the WUS, Global Positioning System (GPS) measurements revealed a clockwise rotation pattern15 in lateral crustal motion relative to the stable North American plate16 (Fig. 1a). Generally, the Basin and Range (B&R) is continuously extending in the northwest direction17,18, while the Great Valley (GV) and Colorado Plateau (CP) remain relatively undeformed17,18,19,20. Notably, the crustal motion within the southern B&R is lower than that further north21. From the northwestern B&R to the Pacific Northwest (PNW), the crustal motion transitions from northwest to northeast15,22. This change in the surface motion was primarily attributed to the changing driving force, transitioning from right-lateral shear along the Pacific-North American plate boundary to northeastern push from subduction of the Juan de Fuca (JdF) plate15. While this interpretation aligns with observed surface kinematics, the broader deformation over the entire WUS may also reflect other driving forces, such as those from lateral gradients of lithospheric GPE and active mantle flow, whose exact roles remain unclear.
The seismicity in the WUS correlates with the geodetically measured crustal motion (Fig. 1a) and can be categorized into four main belts/regions: the San Andreas Fault (SAF), Walker Lane (WL), Intermountain Seismic Belt (ISB), and PNW. Recent geophysical studies revealed that the widespread seismicity in the WUS is strongly associated with the spatially varying crustal stress state23,24,25,26 (Fig. 1b). The relatively undeformed GV is bounded by the SAF and WL with prominent seismicity, characterized mainly by strike-slip faulting (Fig. 1b). The remarkable ISB, a north-south-trending seismic belt stretching from the southern CP to the northern Rocky Mountain (RM)27,28, coincides with the eastern boundary of B&R as well as the transition from thin to thick North American lithosphere (Fig. 1a). Most earthquakes in the ISB show normal faulting with E-W extension along the eastern boundary of B&R and the tectonic parabola surrounding the Yellowstone hot spot track, but the crustal stress transitions to a more compressional state in the northern RM with earthquakes exhibiting strike-slip to thrust faulting (Fig. 1b). Seismicity in the PNW is spatially distributed, mainly in the back-arc region, which corresponds to the diffuse crustal motion in this area.
The debated mechanisms for WUS crustal deformation could be boiled down to the often simplified and yet uncertain lithospheric and convective mantle structures adopted in different studies and the associated fine-scale dynamics2,3,4,5,6,7,8,9,10,11,12,13,14,29,30,31,32,33,34,35,36,37. Particularly, the lithosphere–asthenosphere interaction below this region remains contentious. Previous studies generally assumed a flat lithosphere–asthenosphere boundary (LAB) for the continental plate at 100 km or deeper2,3,4,5,6,7,9,10,11,13. Under this assumption, the convective mantle and lithospheric dynamics were often computed separately and connected through one-way coupling that only allowed the convecting mantle to exert horizontal shear (i.e., viscous drag) along the flat LAB4,6,7,11,12. This horizontal shear was usually estimated from mantle convection models that only considered long-wavelength deep density anomalies4,6,7,11,12. Consequently, this approach may not adequately resolve the fine-scale interaction between the convective mantle and the lithosphere due to the lack of spatially varying lithospheric thickness and associated mantle deformation35,36,37. Indeed, the assumed flat LAB contradicts recent global38,39 and regional40,41,42 studies showing significant lateral variations in lithospheric thickness.
In addition, the importance of 3D lithospheric effective viscosity structure, which impacts stress transmission and crustal deformation, has been previously undervalued. Earlier studies either assumed mechanically strong continental plates with uniform strength9,11,12,13 or focused solely on lateral variations in bulk lithospheric effective viscosity2,3,4,5,7,10,11,12. In the latter scenario, lithospheric dynamics was frequently modeled under the thin-shell approximation, treating the lithosphere as a thin two-dimensional (2D) layer with constant thickness and vertically uniform properties. This method usually estimated lateral viscosity variations from geodetically or geologically determined deformation fields2,3,5,7,10. However, recent studies highlighted the crucial need for independently determined 3D lithospheric effective viscosity structures to accurately model crustal deformation31. Hence, a more sophisticated modeling approach beyond the thin-shell approximation is essential to fully capture the detailed 3D lithospheric dynamics.
Here, we present a set of data-orientated 3D dynamic models with detailed lithospheric and convective mantle processes computed within a unified physical framework. The best-fitting fully dynamic model well reproduces the observed surface topography (Supplementary Fig. 1), directional pattern of crustal stress field25,26 (Supplementary Fig. 2), surface deformation rates43 (Supplementary Fig. 3), and GPS-measured differential crustal motion. Utilizing the best-fitting model, we provide quantitative analyses on crustal deformation in the tectonically active WUS and the role of the realistic 3D lithosphere.
Results and discussion
Construction of the fully dynamic 3D model
We model the lithosphere and convective mantle as an incompressible viscous fluid in spherical geometry (“Methods” section). The numerical model covers a region spanning 60° × 100° × 2890 km in latitude × longitude × radius, with the finest resolution (~7 km) inside the lithosphere and asthenosphere within the WUS. The model’s high resolution allows us to faithfully simulate the fine-scale 3D dynamics in the WUS, especially the previously unexplored lithosphere–asthenosphere interaction arising from the spatially varying lithospheric thickness and shallow mantle flow. Unlike most previous studies that employed one-way coupling, our model incorporates natural coupling between the convecting mantle and lithosphere by simultaneously including the realistic lithospheric and convecting mantle structures (Fig. 2). Furthermore, the data-oriented nature of our geodynamic modeling approach allows us to test models with different lithospheric and convecting mantle structures to isolate their respective effects on crustal deformation. In this study, we construct ten different models (Table 1) to fully explore the driving mechanism for WUS intracontinental deformation.
a–c Cross-sections showing the thermal structure (adapted from refs. 36,37) beneath the North American plate at different latitudes. d–f Cross-sections showing the effective viscosity structure within the WUS at different latitudes. g Map views of the 3D effective viscosity structure within the WUS. The arrows in (a)–(f) show the mantle flow relative to the stable North American plate. The black contours in (d)–(f) are isotherms at every 100 °C. In (g), the magenta dashed lines mark the location of LAB at 75 km, approximating the transition from thin to thick lithosphere in LTM1, and the white dashed lines show the locations of cross-sections (a)–(f).
In our model (“Methods” section), the present-day mantle structure is adopted from a time-dependent mantle flow model using the hybrid geodynamic modeling approach44, which combines the forward45 and adjoint46 data-assimilation algorithms. The present-day 3D JdF slab structure was reproduced by the high-resolution forward approach45, and other mantle structures, including the subducted Farallon slab, lithospheric drips, and hot-mantle anomalies, were derived from recent high-resolution seismic tomography42,47 via the adjoint method46. This time dependence matches several independent geophysical and geological observations within the WUS. For example, the evolving mantle thermal state reproduced the late-Cenozoic volcanic history36 and topographic changes48. The associated mantle flow and density anomalies also matched the SKS splitting measurements37 and free-air gravity anomaly48.
The density and viscosity structures of the continental lithosphere, characterized by strong lateral variations in thickness, play a critical role in truthfully modeling lithospheric deformation2,3,4,6,7,14,31. We employ a hybrid approach that merges LITHO 1.038 and a recent regional body-wave tomography model42 to construct our lithospheric thickness model (“Methods” section, LTM1), which effectively captures the first-order lithospheric thickness change along the eastern boundary of B&R (Fig. 1). Using the seismically detected Moho depth49 and LAB depth38,42, we deduce the lithospheric density structure by matching surface topography (“Methods” section). Additionally, we construct a 3D lithospheric effective viscosity structure based on recent seismic attenuation studies50,51 (“Methods” section, Fig. 2g). This approach allows us to independently calculate the fine-scale lithospheric deformation by avoiding direct reliance on GPS measurements.
Lithosphere–asthenosphere interaction beneath the WUS
Our fully dynamic 3D model well captures the fine-scale interaction between the lithosphere and convecting mantle beneath the WUS. The dominantly eastward upper-mantle flow in the region is mainly driven by the sinking Farallon slab currently located beneath the central and eastern US36,37 (Fig. 2a–f). Locally, the flow is diverted by the subducting JdF slab and the thick cratonic lithosphere on the east (Fig. 3a). Below the region with a thin lithosphere, the predicted mantle flow pattern independently matches the recent observation of asthenospheric azimuthal anisotropy52 (Fig. 3a). The modeled highly segmented JdF slab, consistent with seismic tomography53, allows hot asthenospheric material to flow through the central slab tear and around its edges to beneath the northern B&R and southern SRP36,37, respectively. Further inland, the eastward flow is bisected by the thick CP lithosphere, where the southern branch of hot mantle flows around the CP into the Rio Grande Rift (RGR), and other hot material flows northeastward until blocked by the thick cratonic lithosphere east of the B&R. This peculiar flow pattern is vividly tracking the azimuthal anisotropy below the thin WUS lithosphere, with an average angular misfit of 37.5° between the directions of flow and anisotropy (“Methods” section). In the cratonic region, our model predicts little internal deformation within the lithospheric mantle. This implies that there is no active shearing within the lithosphere to generate prominent azimuthal anisotropy. Therefore, we interpret the sudden change of anisotropy orientation across the eastern boundary of B&R as reflecting a contrast between active asthenospheric deformation on the west and frozen-in fabric in the cratonic lithospheric mantle to the east.
a Predicted horizontal mantle flow with a lateral varying lithosphere thickness (LTM1) at 150 km depth relative to the stable North American plate and observed azimuthal seismic anisotropy52 (yellow bars show the fast-propagating direction of shear waves) at 100 km overlying the LAB depth. b Comparison of predicted horizontal mantle flow at 150 km between the model with a lateral varying lithosphere thickness (LTM1) and the model with a constant lithosphere thickness (LTM2). In both panels, the colored contours indicate the upper surface of the JdF slab36,37 at different depths, and the dashed black boxes represent a slab tear, which allows hot asthenospheric material to flow through. The green dashed line in (b) marks the location of LAB at 75 km, approximating the lithospheric thickness step in LTM1.
To illustrate the importance of lateral variations in lithospheric thickness on WUS mantle dynamics, we analyze the asthenospheric flow using different lithospheric thickness models (Fig. 3b). The predicted asthenospheric flow exhibits near-identical patterns with a laterally varying (LTM1; red arrows in Fig. 3b) and a constant (LTM2; light-blue arrows in Fig. 3b) lithospheric thickness beneath the region with a thin lithosphere. However, the fast horizontal flow with LTM2 continues to go eastward beneath the intermountain west, while the flow in the model with LTM1 largely stops here (Fig. 3b). Notably, the fast eastward mantle flow predicted with LTM2 is nearly orthogonal to the observed azimuthal anisotropy beneath the intermountain west, resulting in a large average angular misfit of 49.7°. Although seismic anisotropy does not uniquely reveal the pattern of mantle flow, it could help eliminate certain scenarios. For example, the flow predicted with LTM2 (Fig. 3b) suggests strong E-W azimuthal anisotropy east of the B&R, opposite to observation (Fig. 3a). In contrast, the flow with LTM1 implies little deformation in this region, not violating the anisotropy constraint that could reflect fossil fabric instead.
Complex lithospheric structure controls WUS crustal deformation
The E-W contrast in WUS lithospheric thickness (Fig. 1) implies a complex 3D effective viscosity and density structure. In the thin lithosphere region on the west, both the crust and lithospheric mantle are rheologically weak (Fig. 2d–g) and actively deforming (Fig. 1a). In contrast, the cratonic lithosphere east of B&R is much thicker and less tectonically active; this thick root blocks and diverts shallow asthenospheric flow (Fig. 3a). Besides, recent studies demonstrated that the thick cratonic lithospheric mantle is denser than the ambient asthenosphere and modulates the crustal stress and surface topography14,54,55,56. Despite these findings, the role of 3D lithospheric structure in modulating crustal deformation remains largely unexplored.
To quantitatively assess the impact of 3D lithospheric structure on crustal deformation, we conduct three simulations (M1-M3) using different lithospheric structures with increasing complexity. The crustal deformation rate (i.e., the second invariant of strain rate tensor) and seismicity are expected to be correlated57,58,59. Therefore, we compare the predicted crustal deformation rate to observed seismicity, while employing a seismicity prediction power analysis (“Methods” section) to quantify the match between model prediction and observation, with a higher value representing a better match. To compare with the GPS measurements, we calculate the vectorial mismatch between the predicted surface motion and a smoothed version of GPS-determined surface motion (“Methods” section).
The model with the simplest lithospheric structure (M1), consisting of a laterally uniform crust and lithospheric mantle, predicts a diffusive deformation pattern without clear localization of strain rate (Fig. 4a). The seismicity prediction power of M1 is 34.33%. Most modeled deformation is concentrated along the plate boundary (i.e., the SAF). The predicted crustal motion, whose magnitude decays inland (Fig. 4d), is dominated by the plate boundary effect (Supplementary Fig. 4a–c). The predicted surface motion deviates from observation by an average residual of 4.01 mm/yr.
Predicted depth-averaged crustal deformation rate (the second invariant of strain rate tensor) in the uppermost 30 km with a a uniform lithosphere, M1, b a lithosphere of constant thickness but varying Moho depth, M2, c a heterogeneous lithosphere as geophysically inferred, M3. Comparisons between the GPS-measured surface motion and predicted surface motion from d M1, e M2, and f M3. Black dots in (a)–(c) indicate earthquake locations from 1980 to 2020. The thick red lines outline the WL and ISB in (a)–(c). In (d)–(f), the black bars represent the smoothed GPS measurements, and the magenta bars represent the predictions.
In the second model (M2, Fig. 4b, e), we further consider the lateral gradients of crustal GPE, another primary driving force for intraplate deformation3,8,60. We approximate this GPE using laterally varying Moho depth60 and a constant crustal density at 2850 kg/km3, except for the SRP, whose density is assumed to be 2950 kg/m3 due to its enrichment in basaltic composition61,62. Other model properties in M2 are the same as in M1. The resulting crustal deformation rate is slightly elevated in regions with thick crust, such as the CP and Wyoming Plateau (WP), due to locally elevated GPE (Fig. 4b). Additionally, the high GPE in the intermountain west drives westward crustal motion in the WUS (cf. Fig. 4d, e). M2 has a seismicity prediction power of 35.50% and an average residual in crustal motion of 4.44 mm/yr, both similar to M1. Clearly, neither M1 nor M2 reproduces the observed seismicity distribution with localized strain accumulation and crustal motion. These tests call for a heterogeneous lithosphere, likely with laterally varying thickness and 3D variations in density and effective viscosity structures14,31,54,55,56, to fully reproduce the observed crustal deformation field.
By incorporating the geophysically inferred lithospheric structure (Figs. 1 and 2), the resulting crustal deformation pattern correlates much better with the observed seismicity distribution (M3, Fig. 4c) and crustal motion (Fig. 4f), with the seismicity prediction power dramatically increasing to 96.37% and the average crustal motion residual dropping to 1.78 mm/yr. In particular, the WL and ISB display very high deformation rates, consistent with their intense seismicity. In contrast, the GV and CP have low deformation rates, also agreeing with seismicity and geodetic measurements17,18,19,20. The high deformation rate in the PNW extends far inland to the western SRP, supported by the distributed seismicity in this region. In addition, the observed rotational crustal motion pattern in the WUS is well reproduced in this model (Fig. 4f). Therefore, the heterogeneous lithosphere is important for forming the observed crustal deformation pattern.
Estimations of different driving forces and associated deformation
The estimations of proposed driving forces, namely plate boundary forces, lithospheric body forces, and basal tractions, depend on the adopted lithospheric structures. In our model, the plate boundary effect is defined as forces exerted on the continental plate by the moving oceanic plates with no contribution from the underlying mantle flow. Traditionally, basal tractions were defined as the horizontal shear exerted by mantle flow along a flat LAB4,6,7,11,12. However, in reality, the LAB exhibits undulations (Fig. 1) and dynamically interacts with the convecting mantle (Fig. 3a), resulting in complex surface tractions comprising both shear and normal forces4. Thus, in our model, we define basal tractions as the total surface forces along the undulating LAB, originating from the underlying mantle flow.
The conventional estimation of lithospheric body forces relied on computing lateral gradients of lithospheric GPE, assuming lithospheric isostasy with surface topography fully supported by lithospheric density anomalies above a presumed LAB depth of 100 km2,3,7. However, this assumed global compensation depth might not be appropriate, as the convective mantle also contributes to surface topography via radial stress along the LAB (i.e., dynamic topography). Furthermore, recent seismic studies revealed strong lateral gradients in LAB depth38,39,40,41,42, particularly in regions like the CP and WP (Fig. 1), where the lithosphere exceeds 100 km in thickness. Consequently, the traditional calculation of lithospheric GPE is physically inaccurate. In our fully dynamic 3D model, lithospheric body forces refer to those originating from lithospheric density anomalies down to the undulating LAB. Unlike previous studies that take surface topography as an input for lithospheric GPE calculation2,3,5,7,8,9,10,11,12, we use it as an independent observation to validate our lithospheric density structure (“Methods” section).
We construct seven additional geodynamic models (M4–M10, illustrated later) with different lithospheric and convective mantle structures (Table 1) to fully explore the impact of the heterogeneous lithosphere on crustal deformation and to quantitatively analyze the different driving forces. In all models, plate motion63 is prescribed in the ocean basins, stable central-eastern US and Canada, as velocity boundary conditions (“Methods” section). Hence, the predicted deformation rate and surface motion include the plate boundary effect in all models.
Mantle convection influences lithospheric deformation through two mechanisms: the plate boundary effect, reflecting the integrated effect of global mantle flow, and basal tractions, arising from mantle flow right beneath the plate. To evaluate how a heterogeneous lithosphere impacts the contribution of mantle convection to crustal deformation, we perform six simulations and analyze the resulting crustal deformation patterns (Fig. 5 and Supplementary Fig. 5). In the models solely considering the plate boundary effect (M4, M7, and M8), we exclude all density anomalies in the convective mantle and continental lithosphere (Fig. 5a, d, Supplementary Fig. 5a, b, e, f). To further consider basal tractions, we utilize three models (M5, M9, and M10), each incorporating different lithospheric structures and all density anomalies in the convecting mantle (Fig. 5b, e, Supplementary Fig. 5c, d, g, h). The crustal stress shown in Fig. 5b reflects the difference between M5 and M4, which have the same lithospheric structure but different convective mantle structures, thereby highlighting the contribution of basal tractions to crustal stress.
Predicted crustal deformation rate and crustal stress in the uppermost 30 km from a M4 with LTM1, a 3D lithospheric effective viscosity structure, and a none convective mantle, b M5 with a lithosphere the same as M4 and all density anomalies in the convective mantle, c M6 with LTM1, a 3D lithospheric effective viscosity structure, all density anomalies in the lithosphere, and a none convective mantle. Comparisons between the GPS-measured surface motion and predicted surface motion from d M4, e M5, and f M6. In (a)–(c), the bars show the directions and magnitudes of horizontal principal stresses, with red representing compression and green representing extension. In (a)–(c), the orange dashed line marks the location of LAB at 75 km, approximating the lithospheric thickness step in LTM1. In (d)–(f), the black bars represent the smoothed GPS measurements, and the magenta bars represent the predictions.
We first estimate the crustal stress and deformation resulting from the plate boundary effect by constructing M4, which assimilates a geophysically inferred heterogeneous lithosphere consisting of LTM1 and 3D variations in effective viscosity. Compared to the models considering the plate boundary effect but having a constant lithospheric thickness (M7 and M8, Supplementary Fig. 5a, b), M4 has a larger seismicity prediction power (89.88%). Notably, along the lithospheric thickness step (the orange dashed line in Fig. 5a), the predicted crustal deformation is localized on the thin and weak side, with little crustal deformation in the interior of CP and WP (cf. Fig. 5a, Supplementary Fig. 5a, b). This finding highlights the importance of the lithospheric thickness step in generating localized crustal deformation. East of the lithospheric thickness step, the thick and strong lithospheric keel penetrates deeper into the asthenosphere, thereby enhancing the coupling between the thick lithosphere and the underlying static mantle. This locally enhanced coupling slows the northwestward motion of the thick lithospheric root (cf. Fig. 5d, Supplementary Fig. 5e, f, magenta arrows), effectively counteracting the shearing from the Pacific plate. As a result, the average residual reduces to 1.93 mm/yr.
In model M5, which further incorporates basal tractions, the predicted crustal deformation exhibits clearly localized high deformation rates in some intraplate regions, such as in the WL and ISB (Fig. 5b), with a seismicity prediction power of 96.62%. The inclusion of shallow hot anomalies (between the LAB and 100 km depth) that are not considered in cases incorporating basal tractions but having a flat LAB at 100 km (M9 and M10) leads to a reduction in asthenospheric effective viscosity (Fig. 2g). Consequently, the coupling between the lithosphere and convective mantle is locally weakened, resulting in a reduction in deformation rate in the interior of northern and southern B&R (cf. Fig. 5b, Supplementary Fig. 5c, d). In contrast, along the lithospheric thickness step (the orange dashed line in Fig. 5b), the crustal deformation rate is largely unchanged (cf. Fig. 5b and Supplementary Fig. 5d), indicating the interaction between the mantle flow and thick lithospheric keel generates localized crustal deformation along the step that counteracts the decoupling effect. Compared to the case without the density-driven mantle flow (M4, Fig. 5a), it shows that the interaction between the active mantle flow and thick lithospheric root locally increases the crustal deformation rate, like in the northern RM and along the eastern boundary of northern B&R (cf. Fig. 5a, b). The eastward mantle flow also pushes the lithospheric root eastwards, reducing westward motion in the southern CP and central and southern B&R (cf. Fig. 5e, Supplementary Fig. 5g, h).
To estimate crustal stress and deformation due to the lithospheric body forces over the WUS, we construct a model (M6) that incorporates a heterogeneous lithosphere with 3D viscosity and density variations. In this model, all density anomalies in the convective mantle are removed. The crustal stress shown in Fig. 5c is the difference between M6 and M4, representing the crustal stress solely due to the lithospheric body forces. The lithospheric body forces, arising from lateral gradients of lithospheric GPE, elevate the crustal deformation rate over the whole WUS (cf. Fig. 5a, c). While our estimated crustal stress due to the lithospheric body forces is generally consistent with previous studies2,3,4,7,8,9, it is noteworthy that the underlying physics differs. We emphasize that a continental lithosphere with a laterally varying thickness and a denser-than-asthenosphere lithospheric mantle is critical in calculating and understanding the lithospheric GPE14,56. Additionally, the high GPE east of the B&R drives the WUS to move to the northwest, particularly in the B&R, SRP, and PNW (cf. Fig. 5d, f).
Mechanism for localized intraplate deformation
While the 3D crustal effective viscosity structure influences the crustal deformation rate (“Methods” section), the primary driving force for the localized crustal deformation along the lithospheric thickness step is the locally enhanced interaction between the lithosphere and asthenosphere (Figs. 5 and 6). This enhanced lithosphere–asthenosphere interaction ultimately affects the crustal effective viscosity structure, particularly the intraplate crustal weak zone (Fig. 2g), which cannot be fully explained by other mechanisms (“Methods” section). Our model demonstrates that beneath regions with a thin lithosphere, the mantle flow does not generate significant shear on the horizontal plane (Fig. 6a–c) due to the low asthenospheric effective viscosity (Fig. 2g), which is consistent with previous studies6,7. However, our model reveals a strong eastward normal traction (i.e., pressure drag) on N-S trending vertical planes beneath the region with a thin lithosphere (Fig. 6e, f), which is not previously captured. This increased eastward normal traction is due to the thick lithospheric keel blocking the landward mantle flow (M3, Figs. 3 and 6), as it leads to large positive dynamic pressure in the convecting mantle beneath the thin lithosphere region. This pressure drag (~20 MPa), which is part of basal tractions, pushes the lithospheric keel eastwards and increases the horizontal shear in regions with a thick lithosphere, such as the CP, WP, and northern RM (cf. Fig. 6a–c). Furthermore, this pressure drag drives localized lithospheric deformation along the lithospheric thickness step at the eastern boundary of B&R (Fig. 5a, b), representing a key mechanism for the ISB (Figs. 1a and 4).
a–c Tractions on horizontal planes. d–f Tractions on N-S trending vertical planes. In all panels, the background color shows the radial component of the traction vector, with red representing upward traction and blue representing downward traction. The vectors show the horizontal component. The magenta dashed line marks the location of LAB at 75 km, approximating the lithospheric thickness step in LTM1.
Recent seismological studies41 revealed fine-scale lithospheric thinning beneath the eastern boundary of northern B&R, a factor that is not included in our lithospheric thickness model. This observed lithospheric thinning may lead to further localization of lithospheric deformation by reducing the bulk lithospheric strength, similar to the effect of a localized crustal weak zone. The shallow LAB observed beneath the eastern boundary of northern B&R appears anti-correlated with the crustal thickness, suggesting its formation as a result of recent tectonic activities41. Therefore, we propose that the localized interaction between hot asthenospheric flow and lithospheric thickness step, starting around 12 Ma36, plays an important role in generating locally thinned lithosphere.
Revised role of different forces in driving WUS crustal deformation
The importance of variable lithospheric properties (Figs. 3–6) requires a reconsideration of previously proposed driving forces (plate boundary forces, lithospheric body forces, and basal tractions) for WUS crustal deformation. In many previous studies, the estimations of driving forces were influenced by the simplified lithospheric structures adopted2,3,5,6,7,10,11,12. We have shown that the lithospheric thickness step creates a strong pressure drag (Fig. 6) that causes localized intraplate deformation (Figs. 4 and 5), a factor that has been previously neglected. Additionally, the presence of a dense and thick cratonic root alters the estimation of lithospheric GPE, which calls for a reevaluation of its contribution to crustal deformation. Our best-fitting model (M3) not only successfully reproduces the observed crustal deformation (Fig. 4c, f), but also predicts a crustal stress field consistent with high-quality earthquake focal mechanism solutions23,24 and recent geophysical estimations of the horizontal maximum compression directions (SHmax) and Aφ parameter25,26 (Fig. 7). Based on the best-fitting model, we further evaluate the relative importance of plate boundary forces (Fig. 5a), basal tractions (Fig. 5b), and lithospheric body forces (Fig. 5c) by calculating the ratios of their magnitudes (i.e., the second invariant of stress tensor; Fig. 8).
a Predicted crustal stress and observed focal mechanism solutions23,24 overlying the predicted depth-averaged crustal deformation rate. b Predicted maximum horizontal compression directions (SHmax) overlying the predicted second invariant of crustal stress tensor (Ttotal), with the bars showing the predicted SHmax directions and color showing angular misfit to the geophysical estimations25. c Geophysical estimations of Aφ parameter25 (dots) overlying the predicted Aφ parameter. The shaded regions with blue outlines represent cold materials, including subducting slab, slab curtain, lithospheric drips, and continental lithosphere, at 100 km (with the outline representing a temperature 10 °C cooler than the ambient mantle).
The second invariant of the crustal stress tensor caused by a plate boundary forces (TPBF), b basal tractions (TBT), and c lithospheric body forces (TLBF). Ratios of driving forces with d TLBF/TBT, e TPBF/TBT, and f TPBF/TLBF. In (d)–(f), red indicates the greater importance of the force in the denominator, white denotes that the two forces are comparable, and blue shows the force in the numerator is more important.
The observed focal mechanism solutions23,24, geophysically estimated SHmax directions25,26, and Aφ parameter25,26 show strong spatial variations over the WUS that cannot be fully explained by one single driving force9,14,25,26. In the southwest coastal region, the plate boundary effect dominates the crustal motion and stress field (Figs. 4f, 5a, d, 7a and 8e, f). Along the SAF, the Pacific plate exerts right-lateral shearing forces, driving strike-slip faulting (Figs. 5a and 7a, c) and northwestward crustal motion (Fig. 5d). The PNW and northern SRP are complex regions with observed crustal stress generally in N-S compression23,24,25,26 (Fig. 1b), which was largely attributed to the plate boundary forces from the shearing along the SAF and subduction of the JdF plate15,25,64. In our best-fitting model, all three driving mechanisms contribute large stresses in the PNW (Fig. 5a–c). The crustal stress generated by GPE gradients and basal tractions is generally in the same direction with opposite signs in this region. Combined with the plate boundary forces exerted by the JdF plate and Pacific plate, the PNW and northern SRP experiences strong N-S to NW-SE compression (~20–40 MPa), with crustal stress state in the thrust faulting regime (Fig. 7c). Overall, the basal tractions play the most important role in deforming the PNW and northern SRP (Fig. 8d–f). Further inland, in the central and southern B&R, the westward extension (Fig. 7a, c) is predominantly driven by the plate boundary force originating from the Pacific-North American boundary with strong E-W extension and weak N-S compression (Fig. 5a). Furthermore, the N-S extensional stress due to basal tractions (Fig. 5b) and E-W extensional stress from the gradients of lithospheric GPE (Fig. 5c) collectively modify the crustal stress field into purely E-W extension, aligning with the focal mechanism solutions and geophysical estimations of SHmax directions and Aφ parameter (Fig. 7). In the northern B&R, extensional crustal stresses due to plate boundary forces and GPE gradients generally have comparable magnitudes (Fig. 8f). In the northwestern B&R, the crustal stress field shows a combined effect of all three driving forces with comparable magnitudes (Fig. 8d–f). Further north, the E-W compression in the northern RM is predominantly from basal tractions (Fig. 8d, e), which are locally enhanced by the strong and neutrally buoyant slab curtain65. Noteworthy, along the eastern boundary of B&R and the tectonic parabola surrounding the Yellowstone hot spot track, where the ISB is located, the GPE-induced extensional stress dominates the crustal stress field and drives normal to strike-slip faulting (Figs. 7a and c, 8d, f), in line with the focal mechanism solutions23,24. Overall, in the WUS, the plate boundary effect controls the coastal region and the central-southern B&R, while lithospheric body forces dominate the northern B&R, and basal tractions resulting from mantle flow play an important role in deforming the northern WUS (Figs. 8 and 9).
The thin black lines indicate the major tectonic provinces on the surface. The dashed black ellipse outlines the lithospheric thickness step, where the convecting mantle applies pressure drag to the North American lithosphere. BT basal tractions, LBF lithospheric body forces, PBF plate boundary forces, NAm North American plate, JdF Juan de Fuca plate.
Our systematic analysis demonstrates the crucial role of a 3D heterogeneous lithosphere fully coupled with the underlying convecting mantle in accurately reproducing observed crustal deformation. In particular, the lateral variation in lithospheric thickness significantly influences the contribution of mantle convection to crustal deformation, as well as the estimation and understanding of lithospheric body forces (Figs. 5, 9, and Supplementary Fig. 5). The GPS-measured lateral surface deformation in the WUS reflects a combined effect of plate boundary forces, lithospheric body forces, and basal tractions. Among all driving forces, only basal tractions drive eastward differential motion over the WUS, a crucial factor in reproducing the observed surface deformation (Figs. 4f and 5d–f). This finding highlights the importance of shallow mantle flow interacting with a lithosphere that has laterally varying thickness (Figs. 3 and 4), as is often neglected in previous studies. Furthermore, the heterogeneous lithospheric structure plays a critical role in generating the observed crustal deformation within the WUS. Particularly, the lithospheric thickness step along the eastern boundary of B&R is essential in generating localized intraplate deformation, which leads to the formation of the enigmatic ISB (Figs. 1 and 6).
Methods
Data-oriented geodynamic modeling approach
To construct a self-consistent, fully dynamic model with coupled lithosphere and convective mantle, we generally follow the modeling approach described in Cao and Liu14. The lithosphere and mantle are modeled as an incompressible viscous fluid in spherical geometry under the Boussinesq approximation. We use a user-modified version of CitcomS with tracers14,66,67 to solve the momentum equation.
The high-resolution 3D models cover a region of 60° × 100° × 2890 km in latitude × longitude × radius, with the finest resolution (~7 km) inside the lithosphere and asthenosphere within the WUS. This model domain is sufficiently larger than the conterminous US. It contains the surrounding ocean basins and parts of Canada and Mexico, allowing natural modeling of the detailed 3D lithospheric and mantle dynamics, including the fine-scale lithosphere–asthenosphere interaction that was not captured in previous studies.
A hybrid velocity boundary condition is used on the top of the model to incorporate far-field forces and truthfully simulate intracontinental deformation. Plate motion63 is prescribed in the ocean basins surrounding the conterminous US, the stable central and eastern US (east of 110°E), and part of Canada (north of 55°N), while the actively deforming WUS and Mexico are set to have free-slip boundary condition. All other boundaries have a free-slip velocity boundary condition. Each model is an individual simulation with different lithospheric and mantle structures, as listed in Table 1.
Lithospheric and convective mantle structures
The convective mantle structure is adopted from a time-dependent mantle flow model using the hybrid geodynamic modeling approach44. This time-dependent convecting mantle structure matches multiple geophysical and geological observations36,37,48. Most features in the convecting mantle, including the subducted Farallon slab, lithospheric drips, and hot asthenospheric material, were derived from high-resolution seismic tomography models42,47 using the adjoint assimilation scheme46. Features near the subduction zone, including the subducting Juan de Fuca slab and mantle wedge, were generated by a forward sequential assimilation scheme45. The convecting mantle has a temperature- and depth-dependent effective viscosity structure, the same as Zhou et al.36,37.
The lithosphere structure in our model is inferred from recent seismic studies38,42,49,50,51,68,69,70. The initial lithospheric thickness model has a Moho depth model from CRUST 1.049 and a hybrid LAB depth model14 derived from LITHO 1.038 and a body-wave tomography model42. Since LITHO 1.038 does not capture the abrupt lithospheric thickness change along the eastern boundary of the B&R, which is better imaged in the recent regional body-wave seismic tomography42, we redefine this part of the LAB depth based on the body-wave seismic tomography model. In practice, we assume the continuous fast anomalies down to 250 km from the seismic tomography model represent the continental lithosphere. We also adopt an MLD in the thick cratonic lithospheric mantle at 120 km, based on recent seismic studies68,69,70. Seismic studies revealed that the MLD marks the boundary between two layers with different seismic properties68,69,70, also indicating changes in their physical properties. Besides, recent geophysical and geodynamic studies showed that the continental lithospheric mantle has a layered density structure14,54,55,56,71,72,73. Therefore, we assume the MLD also marks an interface for lithospheric mantle densities.
The initial lithospheric density structure has three layers. In the crust, we assume a constant density of 2850 kg/m3, except for the SRP. In the SRP, its lower-than-ambient elevation was attributed to its basalt-rich crust61,62, so we adopt a crustal density of the SRP at 2950 kg/m3, which is the same as that in Zhou and Liu48. The density of the lithospheric mantle is elusive, and the proposed density ranges from neutrally buoyant74,75,76 to denser than ambient asthenospheric material14,54,55,56,71,72,73,77. In our lithosphere model, the density structure of the lithospheric mantle has two layers separated by the seismically observed MLD68,69,70. The densities of these two layers were adjusted to reproduce the continental-scale surface topography contrast between the WUS and the central and eastern US, as well as between the Pacific Ocean and the WUS14. The resultant best-fitting lithospheric mantle density structure has an upper layer with a density of 3355 kg/m3 over the whole conterminous US and a lower layer with a density of 3375 kg/m3 in the central US and 3385 kg/m3 in the eastern US, respectively. This lithospheric mantle density structure is consistent with recent geophysical estimations56,72,73, which showed the cratonic lithospheric mantle is overall ~1% denser than ambient asthenosphere (3340 kg/m3).
To capture the fine-scale lithospheric GPE variations, we fix the density for each layer and region, then adjust the LAB and Moho depth to reproduce the surface topography within the WUS. This process involves two steps: (1) calculate the initial topography difference between the observation and prediction, then adjust the LAB depth to accommodate the initial topography difference with constraints detailed in Cao and Liu14; (2) calculate the residual topography difference between the observation and new prediction from step 1, then adjust the Moho depth to accommodate the residual topography difference. In each step, we first conduct a simulation with the unmodified Moho and LAB depth to predict the surface topography. In the simulation, all density anomalies in the convecting mantle are included, so dynamic topography is naturally included in the prediction. This modeling approach does not rely on the assumption of isostasy. The resulting Moho depth is generally consistent with the recent seismically determined Moho depth in the WUS49,78 (Supplementary Fig. 6).
The 3D effective lithospheric viscosity structure is critical in modeling lithospheric dynamics3,4,6,7,14,31. In our lithosphere model, we use a modified version of the 3D effective lithospheric viscosity structure from Cao and Liu14. The continental-scale lithospheric viscosity structure was determined by a parameter search14. In the parameter search, the effective viscosity of the WUS, central US, and eastern US were independently varied. The best-fitting lithospheric effective viscosity structure minimized the angular misfit of maximum horizontal compression (SHmax) directions to the observation25,26 over the conterminous US.
We further infer the fine-scale lithospheric effective viscosity structure in the WUS based on recent seismic attenuation studies50,51. Seismic attenuation represents anelastic properties of rocks79,80 and could be linked to the steady state viscosity by linear viscoelasticity theory. The same set of state variables controls both effective viscosity and seismic attenuation81,82. Generally, the seismic attenuation map determines the spatial pattern of effective viscosity but leaves the absolute value undetermined. Therefore, it is possible to infer the effective viscosity structure from seismic attenuation follows the same procedure as in Liu and Hasterok31. Since the seismic attenuation in the lithospheric mantle beneath the conterminous US shows regional-scale variations51, largely consistent with the effective viscosity variations in Cao and Liu14, we keep the effective viscosity in the lithospheric mantle unchanged. The fine-scale 3D crustal viscosity structure is converted from a recent crustal seismic attenuation study50. The crustal seismic attenuation shows the integrated effect through the whole crust. Practically, to construct the 3D effective viscosity structure, we first assume a linear crustal geotherm with lateral varying crustal thickness within the WUS. Then, we determine the temperature-dependent effective viscosity as a reference viscosity structure. Finally, we use the crustal attenuation map to introduce lateral variations at all depths, assuming seismic attenuation is evenly distributed in the radial direction. The whole process could be described by the following equations:
where η is the effective viscosity, β is a coefficient controlling the magnitude of lateral variations, \({\eta }_{0}\) is the reference viscosity, \({E}_{c}\) is the non-dimensional activation energy, T is the non-dimensional temperature, \({T}_{0}\) is the surface temperature, \({T}_{c}\) is the characteristic crustal temperature, Q is the crustal attenuation, \({Q}_{0}\) is the reference crustal attenuation, a and c are numerical coefficients. \({T}_{c}\), \({\eta }_{0}\), and \({Q}_{0}\) are fixed in our parameter search. An extensive parameter search is performed to find the best-fitting conversion coefficients that minimize the averaged angular misfit to the observed SHmax directions25,26 (Supplementary Fig. 7). Through the test, we find the best-fitting coefficients are a = 10, Ec = 3, and c = 3.
We want to emphasize that this approach only approximates the real 3D effective viscosity structure. A better way is to use the 3D magnetotelluric (MT) data inferred effective viscosity structure, which is critical in understanding lithospheric dynamics31,83,84. However, due to currently limited MT data coverage, it does not allow a survey covering the whole conterminous US. In the WUS, our effective viscosity model captures the main features revealed by a most recent MT survey85.
Calculating crustal stress and deformation
Our numerical models output the full stress tensor and the second invariant of the strain rate tensor on every computing node. We radially integrate the full stress tensor and the second invariant of the strain rate tensor down to 30 km (10 km for Supplementary Fig. 3). Subsequently, we calculate the depth-averaged horizontal principal stress and the crustal deformation rate (i.e., the second invariant of the strain rate tensor).
The predicted surface motion is output in a lower mantle fixed frame. We take the direct output and remove the North American plate motion63 relative to the fixed lower mantle to get the relative crustal motion.
Evaluating predicted mantle flow against seismic observation
Our convecting mantle structure is adopted from a time-dependent mantle flow model44, which matches multiple geophysical and geological observations36,37,46. After incorporating a geophysically constrained lithosphere with lateral varying thickness, we further evaluate the predicted mantle flow by comparing the active mantle flow to the recent observation of depth-dependent seismic azimuthal anisotropy52, which is not included in our previous studies. We define the active mantle flow as the asthenospheric material having a velocity larger than 0.01 cm/yr in the North American plate fixed reference frame16. Subsequently, we calculate the angular misfit between the predicted active mantle flow field and observed seismic azimuthal anisotropy52.
Seismic prediction power analysis
We perform a seismic prediction power analysis to compare the predicted crustal deformation rate field and observed seismicity. First, we calculate the normalized deformation rate field, which keeps the spatial pattern, by normalizing the prediction with the maximum predicted value within the WUS. Then, we sample the normalized crustal deformation rate at 26,577 earthquake epicenters during 1980–2020 (Fig. 1a). The quantitative relation between crustal deformation rate and seismicity remains unknown. Nevertheless, recent geodetic studies showed that more than 90% of seismicity happened in areas with geodetically measured crustal strain rate between 2 × 10−9 to 2 × 10−7 yr−1(ref. 59). Therefore, we assume the model successfully predicts an earthquake if the normalized crustal deformation rate is larger than 0.01, within two orders of magnitude from the maximum, at the epicenter. Finally, we calculate the success percentage to quantify the match between the predicted crustal deformation rate field and observed seismicity.
Evaluating predicted crustal stress and surface motion
To quantify the math between the predicted crustal stress field and the observed crustal stress patterns, we calculate the SHmax directions and compare them to the observation25,26 following the same method as Cao and Liu14. We also calculate the Aφ parameter flowing ref. 86 to determine the faulting regime predicted by the model. Since the Aφ parameter is less well-constrained than SHmax directions26, we only qualitatively compare the prediction and observation (Fig. 7c).
The predicted crustal motion is compared to a smoothed version of GPS measurements (spline interpolated from the raw data) on a 0.5° × 0.5° grid over the WUS (black arrows in Figs. 4d–f and 5d–f). The residual velocity, the vectorial difference between the prediction and observation, is calculated on each node, and its average magnitude and average angular misfit are used to quantify the match between the prediction and observation.
Effects of 3D crustal effective viscosity structure
We perform four additional models (M7–M10) with different lithospheric and convective mantle structures to quantify how the 3D crustal effective viscosity structure affects the contribution of mantle convection to crustal deformation. With a uniform lithosphere (M7), consisting of LTM2 and constant lithospheric effective viscosity, the predicted crustal deformation shows diffusive patterns and decay monotonically with the distance away from the plate boundaries (Supplementary Fig. 5a), leading to a seismicity prediction power of 73.10%. Within the regions far from the plate boundaries, such as the northern RM and WP, negligible deformation occurs. Besides, the predicted surface motion shows significant northwestward motion in the southwestern US and northward to northeastward motion in the PNW (Supplementary Fig. 5e), with a large average angular misfit (46.7°) and a significant average residual (4.50 mm/yr). The predicted clockwise rotation generally reflects the strong coupling with the fast-moving Pacific plate and the subducting JdF plate. Most of this clockwise motion is solid-body rotation, which does not involve internal deformation of the plate (cf. Supplementary Fig. 5a, e).
With the inclusion of basal tractions (M9), the predicted crustal deformation still maintains a smooth spatial pattern (Supplementary Fig. 5c). The seismicity prediction power increases to 78.11%. The subducting JdF slab locally enhances basal tractions along the western boundary of SRP, resulting in localized increments in crustal deformation (cf. Supplementary Fig. 5a, c). Overall, the active mantle flow drags the WUS eastwards and induces eastward surface motion, particularly in the PNW, SRP, and RM (cf. Supplementary Fig. 5e, g, magenta arrows). The active mantle flow reduces the angular misfit between predicted and observed surface motion to 34.8°, while the average residual remains similar (4.13 mm/yr in M9).
Subsequently, we introduce a 3D crustal effective viscosity structure into the model and assess its impact on the plate boundary effect (M8). The inclusion of this structure notably alters the predicted crustal deformation field in regions away from plate boundaries (cf. Supplementary Fig. 5a, b), increasing the seismicity prediction power to 88.89%. The predicted crustal deformation shows a more localized pattern with high deformation rates in the WL and at the edge of CP (Supplementary Fig. 5b). Importantly, the 3D crustal effective viscosity structure significantly reduces the coupling between the North American plate and the fast-moving Pacific plate, as evidenced by the reduced clockwise rotation in the predicted surface motion (Supplementary Fig. 5f). This decoupling effect reduces the average residual to 2.53 mm/yr, while the average angular misfit (43.4°) remains similar to M7.
When further adding basal tractions (M10) to M8, the predicted crustal deformation field notably changes in the interior of WUS, particularly in the SRP and northern RM (cf. Supplementary Fig. 5b, d). The increased crustal deformation rate in the interior of WUS corresponds to a seismicity prediction power of 96.94%. The predicted crustal motion generally exhibits more eastward motion compared to M8 (cf. Supplementary Fig. 5f, h, magenta arrows) due to the eastward drag exerted by the mantle flow, with a similar average residual (2.53 mm/yr) and a reduced average angular misfit (34.0°). When compared to M9, the inclusion of the 3D crustal structure (M10) significantly reduces the magnitude of surface velocity residual while leaving the average angular misfit unchanged.
Effects of lithosphere–asthenosphere interaction on crustal rheology
One notable rheological feature in the geophysically inferred 3D lithospheric effective viscosity structure is a long crustal weak zone along the lithospheric thickness step (Fig. 2g). This weak zone is important in reproducing the fast-deforming ISB (Fig. 5 and Supplementary Fig. 5). Its effective viscosity is independently inferred and is likely controlled by the long-term thermal, compositional, and mechanical evolution on crustal rheology.
Some studies suggested that this weak zone is a result of local volcanism since the Cenozoic due to the intruding hot material6 or lithospheric delamination87. However, a recent geodynamic simulation indicated that there has been prominent hot asthenospheric material intruding from the oceanic mantle beneath the whole WUS since ~12 Ma36. This broad intrusion would have heated up the WUS lithosphere uniformly rather than generating localized weak zones. While the elevated lithospheric GPE resulting from high plateaus may assist the crustal deformation and weakening around the CP6,8, the reconstructed high Nevadaplano2 is much broader than the narrow weak zone. This situation is similar to the current WUS, where lithospheric GPE gradients drive broad crustal deformation7,9 (cf. Fig. 5a, c). Therefore, we propose that the long-term strain localization caused by lithosphere–asthenosphere interaction along the lithospheric thickness step represents a more plausible mechanism for the formation of localized intraplate weak zones and the subsequent development of intraplate seismic belts.
Formation of the lithospheric thickness step
The formation of the lithospheric thickness step likely depends on the contrasting physical properties of the cratonic and non-cratonic lithosphere, as well as the ancient tectonic processes in the WUS, such as lithospheric delamination87 and flat subduction88. Further research involving time-dependent geodynamic simulations that concurrently compute lithospheric and convective mantle dynamics in a unified physical frame is necessary to investigate how the lithospheric thickness step formed and influenced long-term tectonic processes in the WUS.
Data availability
The GPS-measured surface motion used in this study was downloaded from GAGE/UNAVCO’s website (https://www.unavco.org/data/data.html) in January 2020, and this dataset was produced using the methods described in ref. 89. The earthquake information was downloaded from USGS’s database (https://www.usgs.gov/programs/earthquake-hazards/earthquakes). The LITHO 1.0 model is available at https://igppweb.ucsd.edu/~gabi/litho1.0.html, and the CRUST 1.0 model is available at https://igppweb.ucsd.edu/~gabi/crust1.html. The earthquake focal mechanism solutions are available in their original publications, and additional data can be found at https://www.globalcmt.org. All other data used in this study, including asthenospheric seismic anisotropy, seismic tomography models, seismic attenuation data, and geophysical estimations of SHmax, can be accessed from the in-text citations, and additional data can be found at https://ds.iris.edu/ds/products/emc-earthmodels/. The models’ inputs and predictions are available at https://doi.org/10.5281/zenodo.10850263.
Code availability
The computational code CitcomS is freely available at www.geodynamics.org.
References
Sonder, L. J. & Jones, C. H. Western United States extension: How the west was widened. Annu. Rev. Earth Planet. Sci. 27, 417–462 (1999).
Bahadori, A. & Holt, W. E. Geodynamic evolution of southwestern North America since the Late Eocene. Nat. Commun. 10, 5213 (2019).
Flesch, L. M., Holt, W. E., Haines, A. J. & Shen-Tu, B. Dynamics of the Pacific-North American plate boundary in the western United States. Science 287, 834–836 (2000).
Humphreys, E. D. & Coblentz, D. D. North American dynamics and western US tectonics. Rev. Geophys. 45, RG3001 (2007).
Bird, P. Testing hypotheses on plate‐driving mechanisms with global lithosphere models including topography, thermal structure, and faults. J. Geophys. Res. Solid Earth 103, 10115–10129 (1998).
Bahadori, A. et al. Coupled influence of tectonics, climate, and surface processes on landscape evolution in southwestern North America. Nat. Commun. 13, 4437 (2022).
Ghosh, A. & Holt, W. E. Plate motions and stresses from global dynamic models. Science 335, 838–843 (2012).
Jones, C. H., Unruh, J. R. & Sonder, L. J. The role of gravitational potential energy in active deformation in the southwestern United States. Nature 381, 37–41 (1996).
Becker, T. W. et al. Western US intermountain seismicity caused by changes in upper mantle flow. Nature 524, 458–461 (2015).
Liu, Z. & Bird, P. North America plate is driven westward by lower mantle flow. Geophys. Res. Lett. 29, 17–1 (2002).
Lithgow‐Bertelloni, C. & Guynn, J. H. Origin of the lithospheric stress field. J. Geophys. Res. Solid Earth 109, B01408 (2004).
Naliboff, J. B., Conrad, C. P. & Lithgow‐Bertelloni, C. Modification of the lithospheric stress field by lateral variations in plate‐mantle coupling. Geophys. Res. Lett. 36, L22307 (2009).
Steinberger, B., Schmeling, H. & Marquart, G. Large-scale lithospheric stress field and topography induced by global mantle circulation. Earth Planet. Sci. Lett. 186, 75–91 (2001).
Cao, Z. & Liu, L. Origin of three‐dimensional crustal stress over the conterminous United States. J. Geophys. Res. Solid Earth 126, e2021JB022137 (2021).
McCaffrey, R., King, R. W., Payne, S. J. & Lancaster, M. Active tectonics of northwestern US inferred from GPS‐derived surface velocities. J. Geophys. Res. Solid Earth 118, 709–723 (2013).
Altamimi, Z., Rebischung, P., Métivier, L. & Collilieux, X. ITRF2014: a new release of the International Terrestrial Reference Frame modeling nonlinear station motions. J. Geophys. Res. Solid Earth 121, 6109–6131 (2016).
Bennett, R. A., Wernicke, B. P., Niemi, N. A., Friedrich, A. M. & Davis, J. L. Contemporary strain rates in the northern Basin and Range province from GPS data. Tectonics 22, 1008 (2003).
Thatcher, W. et al. Present-day deformation across the Basin and Range province, western United States. Science 283, 1714–1718 (1999).
Argus, D. F. & Gordon, R. G. Present tectonic motion across the Coast Ranges and San Andreas fault system in central California. Geol. Soc. Am. Bull. 113, 1580–1592 (2001).
Dixon, T. H., Miller, M., Farina, F., Wang, H. & Johnson, D. Present‐day motion of the Sierra Nevada block and some tectonic implications for the Basin and Range province, North American Cordillera. Tectonics 19, 1–24 (2000).
Broermann, J., Bennett, R. A., Kreemer, C., Blewitt, G. & Pearthree, P. A. Geodetic extension across the southern Basin and Range and Colorado Plateau. J. Geophys. Res. Solid Earth 126, e2020JB021355 (2021).
Hammond, W. C. & Thatcher, W. Northwest Basin and Range tectonic deformation observed with the Global Positioning System, 1999–2003. J. Geophys. Res. Solid Earth 110, B10405 (2005).
Herrmann, R. B., Benz, H. & Ammon, C. J. Monitoring the earthquake source process in North America. Bull. Seismol. Soc. Am. 101, 2609–2625 (2011).
Ekström, G., Nettles, M. & Dziewoński, A. M. The global CMT project 2004–2010: centroid-moment tensors for 13,017 earthquakes. Phys. Earth Planet. Inter. 200, 1–9 (2012).
Levandowski, W., Herrmann, R. B., Briggs, R., Boyd, O. & Gold, R. An updated stress map of the continental United States reveals heterogeneous intraplate stress. Nat. Geosci. 11, 433–437 (2018).
Lund Snee, J. E. & Zoback, M. D. Multiscale variations of the crustal stress field throughout North America. Nat. Commun. 11, 1951 (2020).
Smith, R. B. & Sbar, M. L. Contemporary tectonics and seismicity of the western United States with emphasis on the Intermountain Seismic Belt. Geol. Soc. Am. Bull. 85, 1205–1218 (1974).
Smith, R. B. & Arabasz, W. J. Seismicity of the intermountain seismic belt. In Neotectonics of North America (eds Burton Slemmons, D., Engdahl, E. R., Zoback, M. D. & Blackwell, D. D.) 185–228 (The Geological Society of America, 1991).
Bird, P. Lateral extrusion of lower crust from under high topography in the isostatic limit. J. Geophys. Res. Solid Earth 96, 10275–10286 (1991).
Liu, L. & Gurnis, M. Dynamic subsidence and uplift of the Colorado Plateau. Geology 38, 663–666 (2010).
Liu, L. & Hasterok, D. High-resolution lithosphere viscosity and dynamics revealed by magnetotelluric imaging. Science 353, 1515–1519 (2016).
Lowry, A. R. & Smith, R. B. Strength and rheology of the western US Cordillera. J. Geophys. Res. Solid Earth 100, 17947–17963 (1995).
Roy, M., Jordan, T. H. & Pederson, J. Colorado Plateau magmatism and uplift by warming of heterogeneous lithosphere. Nature 459, 978–982 (2009).
Van Wijk, J. W. et al. Small-scale convection at the edge of the Colorado Plateau: implications for topography, magmatism, and evolution of Proterozoic lithosphere. Geology 38, 611–614 (2010).
Wang, W. & Becker, T. W. Upper mantle seismic anisotropy as a constraint for mantle flow and continental dynamics of the North American plate. Earth Planet. Sci. Lett. 514, 143–155 (2019).
Zhou, Q., Liu, L. & Hu, J. Western US volcanism due to intruding oceanic mantle driven by ancient Farallon slabs. Nat. Geosci. 11, 70–76 (2018).
Zhou, Q. et al. Western US seismic anisotropy revealing complex mantle dynamics. Earth Planet. Sci. Lett. 500, 156–167 (2018).
Pasyanos, M. E., Masters, T. G., Laske, G. & Ma, Z. LITHO1.0: an updated crust and lithospheric model of the Earth. J. Geophys. Res. Solid Earth 119, 2153–2173 (2014).
Steinberger, B. & Becker, T. W. A comparison of lithospheric thickness models. Tectonophysics 746, 325–338 (2018).
Delph, J. R. et al. The effects of subduction termination on the continental lithosphere: linking volcanism, deformation, surface uplift, and slab tearing in central Anatolia. Geosphere 13, 1788–1805 (2017).
Liu, T. & Shearer, P. M. Complicated lithospheric structure beneath the contiguous US revealed by teleseismic S‐reflections. J. Geophys. Res. Solid Earth 126, e2020JB021624 (2021).
Schmandt, B. & Lin, F. C. P and S wave tomography of the mantle beneath the United States. Geophys. Res. Lett. 41, 6342–6349 (2014).
Kreemer, C., Blewitt, G. & Klein, E. C. A geodetic plate motion and Global Strain Rate Model. Geochem. Geophys. Geosyst. 15, 3849–3889 (2014).
Zhou, Q. & Liu, L. A hybrid approach to data assimilation for reconstructing the evolution of mantle dynamics. Geochem. Geophys. Geosyst. 18, 3854–3868 (2017).
Liu, L. & Stegman, D. R. Segmentation of the Farallon slab. Earth Planet. Sci. Lett. 311, 1–10 (2011).
Liu, L. & Gurnis, M. Simultaneous inversion of mantle properties and initial conditions using an adjoint of mantle convection. J. Geophys. Res. Solid Earth 113, B08405 (2008).
Sigloch, K. Mantle provinces under North America from multifrequency P wave tomography. Geochem. Geophys. Geosyst. 12, Q02W08 (2011).
Zhou, Q. & Liu, L. Topographic evolution of the western United States since the early Miocene. Earth Planet. Sci. Lett. 514, 1–12 (2019).
Laske, G., Masters, G., Ma, Z. & Pasyanos, M. Update on CRUST1. 0—a 1-degree global model of Earth’s crust. Geophys. Res. Abstr. 15, EGU2013–EGU2658 (2013).
Hearn, T. M. Crustal attenuation from USArray ML amplitude tomography. Geophys. J. Int. 224, 199–206 (2021).
Pasyanos, M. E. A lithospheric attenuation model of North America. Bull. Seismol. Soc. Am. 103, 3321–3333 (2013).
Zhu, H., Yang, J. & Li, X. Azimuthal anisotropy of the North American upper mantle based on full waveform inversion. J. Geophys. Res. Solid Earth 125, e2019JB018432 (2020).
Hawley, W. B. & Allen, R. M. The fragmented death of the Farallon plate. Geophys. Res. Lett. 46, 7386–7394 (2019).
Castellanos, J. C. et al. Seismic anisotropy reveals crustal flow driven by mantle vertical loading in the Pacific NW. Sci. Adv. 6, eabb0476 (2020).
Castellanos, J. C., Humphreys, E. & Clayton, R. W. Evidence of Mantle‐based Deformation Across the Western United States. Geophys. Res. Lett. 49, e2021GL094854 (2022).
Wang, Y., Liu, L. & Zhou, Q. Topography and gravity reveal denser cratonic lithospheric mantle than previously thought. Geophys. Res. Lett. 49, e2021GL096844 (2022).
Bird, P. Long‐term fault slip rates, distributed deformation rates, and forecast of seismicity in the western United States from joint fitting of community geologic, geodetic, and stress direction data sets. J. Geophys. Res. Solid Earth 114, B11403 (2009).
Bird, P. & Kreemer, C. Revised tectonic forecast of global shallow seismicity based on version 2.1 of the Global Strain Rate Map. Bull. Seismol. Soc. Am. 105, 152–166 (2015).
Kreemer, C. & Young, Z. M. Crustal strain rates in the western United States and their relationship with earthquake rates. Seismol. Soc. Am. 93, 2990–3008 (2022).
Artyushkov, E. V. Stresses in the lithosphere caused by crustal thickness inhomogeneities. J. Geophys. Res. 78, 7675–7708 (1973).
DeNosaquo, K. R., Smith, R. B. & Lowry, A. R. Density and lithospheric strength models of the Yellowstone–Snake River Plain volcanic system from gravity and heat flow data. J. Volcanol. Geotherm. Res. 188, 108–127 (2009).
McCurry, M. & Rodgers, D. W. Mass transfer along the Yellowstone hotspot track I: petrologic constraints on the volume of mantle-derived magma. J. Volcanol. Geotherm. Res. 188, 86–98 (2009).
Seton, M. et al. Global continental and ocean basin reconstructions since 200 Ma. Earth Sci. Rev. 113, 212–270 (2012).
Zoback, M. D. & Zoback, M. L. Tectonic stress field of North America and relative plate motions. In Neotectonics of North America (eds Burton Slemmons, D., Engdahl, E. R., Zoback, M. D. & Blackwell, D. D.) 339–366 (The Geological Society of America, 1991).
Schmandt, B. & Humphreys, E. Seismically imaged relict slab from the 55 Ma Siletzia accretion to the northwest United States. Geology 39, 175–178 (2011).
Zhong, S., Zuber, M. T., Moresi, L. & Gurnis, M. Role of temperature‐dependent viscosity and surface plates in spherical shell models of mantle convection. J. Geophys. Res. Solid Earth 105, 11063–11082 (2000).
McNamara, A. K. & Zhong, S. Thermochemical structures within a spherical mantle: superplumes or piles? J. Geophys. Res. Solid Earth 109, B07402 (2004).
Hansen, S. M., Dueker, K. & Schmandt, B. Thermal classification of lithospheric discontinuities beneath USArray. Earth Planet. Sci. Lett. 431, 36–47 (2015).
Liu, L. & Gao, S. S. Lithospheric layering beneath the contiguous United States constrained by S-to-P receiver functions. Earth Planet. Sci. Lett. 495, 79–86 (2018).
Yuan, H. & Romanowicz, B. Lithospheric layering in the North American craton. Nature 466, 1063–1068 (2010).
Hu, J. et al. Modification of the Western Gondwana craton by plume–lithosphere interaction. Nat. Geosci. 11, 203–210 (2018).
Wang, Y., Liu, L. & Zhou, Q. Geoid reveals the density structure of cratonic lithosphere. J. Geophys. Res. Solid Earth 127, e2022JB024270 (2022).
Wang, Y. et al. Secular craton evolution due to cyclic deformation of underlying dense mantle lithosphere. Nat. Geosci. 16, 637–645 (2023).
Jordan, T. H. The continental tectosphere. Rev. Geophys. 13, 1–12 (1975).
Jordan, T. H. Composition and development of the continental tectosphere. Nature 274, 544–548 (1978).
Jordan, T. H. Structure and formation of the continental tectosphere. J. Petrol. Special Volume, 11–37 (1988).
Lee, C. T. A., Luffi, P. & Chin, E. J. Building and destroying continental mantle. Annu. Rev. Earth Planet. Sci. 39, 59–90 (2011).
Schmandt, B., Lin, F. C. & Karlstrom, K. E. Distinct crustal isostasy trends east and west of the Rocky Mountain Front. Geophys. Res. Lett. 42, 10290–10298 (2015).
Romanowicz, B. & Mitchell, B. 1.25—deep earth structure: Q of the Earth from crust to core. Treatise Geophys. 1, 789–827 (2015).
Takei, Y. Effects of partial melting on seismic velocity and attenuation: a new insight from experiments. Annu. Rev. Earth Planet. Sci. 45, 447–470 (2017).
Jackson, I., Fitz Gerald, J. D., Faul, U. H. & Tan, B. H. Grain‐size‐sensitive seismic wave attenuation in polycrystalline olivine. J. Geophys. Res. Solid Earth 107, 2360 (2002).
Turcotte, D. L. & Schubert, G. Geodynamics (Cambridge Univ. Press, 2002).
Murphy, B. S., Liu, L. & Egbert, G. D. Insights into intraplate stresses and geomorphology in the southeastern United States. Geophys. Res. Lett. 46, 8711–8720 (2019).
Egbert, G. D. et al. Fluid transport and storage in the Cascadia forearc influenced by overriding plate lithology. Nat. Geosci. 15, 677–682 (2022).
Murphy, B. S., Bedrosian, P. A. & Kelbert, A. Geoelectric constraints on the Precambrian assembly and architecture of southern Laurentia. In Laurentia: Turning Points in the Evolution of a Continent (eds Whitmeyer, S. J., Williams, M. L., Kellett, D. A. & Tikoff, B.) 203–220 (The Geological Society of America, 2023).
Simpson, R. W. Quantifying Anderson’s fault types. J. Geophys. Res. Solid Earth 102, 17909–17919 (1997).
Wells, M. L. & Hoisch, T. D. The role of mantle delamination in widespread Late Cretaceous extension and magmatism in the Cordilleran orogen, western United States. Geol. Soc. Am. Bull. 120, 515–530 (2008).
Liu, L., Spasojevic, S. & Gurnis, M. Reconstructing Farallon plate subduction beneath North America back to the Late Cretaceous. Science 322, 934–938 (2008).
Herring, T. A. et al. Plate Boundary Observatory and related networks: GPS data analysis methods and geodetic products. Rev. Geophys. 54, 759–808 (2016).
Jones, C. H. et al. Variations across and along a major continental rift: an interdisciplinary study of the Basin and Range Province, western USA. Tectonophysics 213, 57–96 (1992).
Acknowledgements
This work is supported by the Strategy Priority Research Program (Category B) of the Chinese Academy of Sciences XDB0710000 and NSFC grant 92355302 to L.L. We acknowledge the use of the Generic Mapping Tool (GMT) for plotting figures. We are grateful to Liang Liu and Yanchong Li for fruitful discussions.
Author information
Authors and Affiliations
Contributions
L.L. initiated and organized the project. Z.C. prepared the code and performed the numerical simulations. All authors contributed to the data analysis and writing the manuscript.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Peer review
Peer review information
Nature Communications thanks Tianze Liu, and Jonathan Delph for their contribution to the peer review of this work. A peer review file is available.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Cao, Z., Liu, L. Western US intraplate deformation controlled by the complex lithospheric structure. Nat Commun 15, 3917 (2024). https://doi.org/10.1038/s41467-024-48223-2
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-024-48223-2
- Springer Nature Limited
This article is cited by
-
Cenozoic India-Asia collision driven by mantle dragging the cratonic root
Nature Communications (2024)