Abstract
Purification of ethylene (C2H4) as the most extensive and output chemical, from complex multi-components is of great significance but highly challenging. Herein we demonstrate that precise pore structure tuning by controlling the network hydrogen bonds in two highly-related porous coordination networks can shift the efficient C2H4 separation function from C2H2/C2H4/C2H6 ternary mixture to CO2/C2H2/C2H4/C2H6 quaternary mixture system. Single-crystal X-ray diffraction revealed that the different amino groups on the triazolate ligands resulted in the change of the hydrogen bonding in the host network, which led to changes in the pore shape and pore chemistry. Gas adsorption isotherms, adsorption kinetics and gas-loaded crystal structure analysis indicated that the coordination network Zn-fa-atz (2) weakened the affinity for three C2 hydrocarbons synchronously including C2H4 but enhanced the CO2 adsorption due to the optimized CO2-host interaction and the faster CO2 diffusion, leading to effective C2H4 production from the CO2/C2H2/C2H4/C2H6 mixture in one step based on the experimental and simulated breakthrough data. Moreover, it can be shaped into spherical pellets with maintained porosity and separation performance.
Similar content being viewed by others
Introduction
Separation of valuable components for multicomponent mixtures in one step without preconcentration is one of the most challenging tasks in separation science. In the process of C2H4 production, the product compositions of the thermal decomposition are complicated, and the conversion of dehydrogenation is only ca. 50%–60%1. Therefore, the resulting C2H4 usually contains a variety of impurities, among which carbon dioxide (CO2), acetylene (C2H2) and ethane (C2H6) are the most difficult ones to separate because of very similar physical and chemical properties with C2H42,3. To obtain polymer-grade C2H4 (>99.9%), multi-step processes are needed to remove the impurities, including chemical absorption, catalytic hydrogenation, cryogenic distillation, etc4. The stepwise purification processes result in huge equipment costs and energy consumption5.
Using recyclable physisorbents, the adsorptive separation can be a promising approach for high-purity C2H4 thanks to the simple operation processes and lower energy requirements6,7,8,9,10. Metal–organic frameworks (MOFs), or porous coordination polymers (PCPs)/metal–organic materials (MOMs), with tunable pore structures11,12,13,14,15, have shown great potential for binary C2 hydrocarbons separation, such as C2H2/C2H416,17,18,19,20,21,22,23, C2H4/C2H624,25,26,27,28,29,30,31, and C2H2/CO232,33,34,35,36. Compared with the multi-step separation process, purification of C2H4 in one-step from complex systems is more valuable in terms of energy utilization and chemical process. However, limited by the physicochemical properties of four gas molecules (kinetic diameter: CO2 ≈ C2H2 < C2H4 < C2H6; quadruple moment: C2H2 > CO2 > C2H4 > C2H6)37,38,39, it is extremely difficult to separate C2H4 from the quaternary CO2/C2H2/C2H4/C2H6 in one step. Although a few of studies have achieved the one-step preparation of C2H4 from the ternary C2H2/C2H4/C2H640,41,42,43,44,45,46,47,48 or more difficult four-component separation2,49,50, the understanding of such a complex systems and the corresponding principle of structural design are far from sufficiency51.
Herein, we show that unlocking the framework hydrogen bonding can affect the pore size/shape and pore chemistry, and weaken the affinity to C2 hydrocarbons, especially C2H4 (Fig. 1). The fine turning of pore structure shifts the multi-component gas separation function, enabling one-step production of high-purity C2H4 in the quaternary CO2/C2H2/C2H4/C2H6.
Results
Structure and adsorption properties of Zn-fa-datz (1)
[Zn2(fa)(datz)2] (Zn-fa-datz (1), H2fa = fumaric acid, Hdatz = 1H-1,2,4-triazole-3,5-diamino) was initially selected52, because of its high stability in moisture conditions (Supplementary Fig. 5), ultramicroporous nature and polar pore surface without open-metal coordination sites, based on our previously raised general rule51. Zn-fa-datz (1) is a pillared-layer coordination network with pcu topology (Supplementary Fig. 1). Each Zn2+ ion is saturated by three N atoms from three datz– ligands and one O atom from a fa2– ligand, forming a 3D pillar-layered network with accessible 1D ultramicroporous channels (Fig. 2a and Supplementary Fig. 2). The purity and porosity were confirmed by powder X-ray diffraction (PXRD) pattern and 195 K CO2 adsorption isotherm, respectively (Fig. 3a, Supplementary Fig. 3 and Supplementary Table 1). Note that, because N2 diffuses extremely slowly in Zn-fa-datz (1) (Supplementary Fig. 4), 195 K CO2 adsorption isotherm was conducted for the study of the porosity. As we expected, Zn-fa-datz (1) features stronger affinity for C2H2 (34.7 kJ mol–1) and C2H6 (39.4 kJ mol–1) than C2H4 (33.6 kJ mol–1) at the low loading (Fig. 3d, Supplementary Figs. 6–9 and Supplementary Table 2). The equimolar C2H2/C2H4/C2H6 mixture breakthrough experiment shows that C2H4 eluted preferentially with high purity (99.9%) from three gases in the fixed-bed adsorber (Fig. 5a), thus further demonstrating that Zn-fa-datz (1) can achieve one-step purification of C2H4 in the ternary C2 hydrocarbon mixture. However, due to the lower CO2 affinity (24.0 kJ mol–1) than for C2H4 (33.6 kJ mol–1) (Fig. 3c, d and Supplementary Table 2), Zn-fa-datz (1) failed to produce C2H4 in one-step from the equimolar CO2/C2H2/C2H4/C2H6 quaternary mixture (Fig. 5b).
Regarding the thermodynamic aspect, the adsorption affinity for C2H4 should be the lowest among the four adsorbates in order to achieve one-step purification of C2H4 from the CO2/C2H2/C2H4/C2H6 quaternary mixture49. For Zn-fa-datz (1), the narrow cavity ensures that the larger C2H6 molecule (kinetic diameter = 4.44 Å) can fully contact the pore surface and achieve a higher interaction than the smaller C2H4 (kinetic diameter = 4.16 Å). Nevertheless, it also causes C2H4 to bind slightly more strongly to the network than the smaller CO2 (kinetic diameter = 3.30 Å)53. We speculated that by fine tuning the pore structure to achieve a more optimized CO2 adsorption environment, it is possible to reverse the adsorption affinity of C2H4 and CO2 without affecting the adsorption sequence of C2H2/C2H4/C2H6. After carefully analyzing the Zn-fa-datz (1) network, it can be observed that the pore wall of 1D channel is constituted by fa2– ligands and both two amino groups of datz– ligands through four tight hydrogen-bonding interactions (O-H···N = 1.95–2.12 Å, ∠O-H···N = 138.8–170.4°) (Fig. 2d and Supplementary Fig. 12). The hydrogen bonds restrict the swing of ligands and determine the arrangement of adsorption sites and size/shape of the channel. Hence, we predict that precise pore structure control could be achieved by regulating the hydrogen bonds via different amino side groups (i.e., replacing the diamino datz– with unilateral-amino 3-amino-1,2,4-triazolate, atz–).
Synthesis and characterization of Zn-fa-atz (2)
Solvothermal reaction of Zn(NO3)2·6H2O with H2fa and Hatz in a DMF/MeOH/water mixed solvent gave a pillared-layer coordination network with 1D channels, [Zn2(fa)(atz)2] (Zn-fa-atz (2)) (Fig. 2b). Single-crystal structure analysis at 298 K revealed that Zn-fa-atz (2) crystallizes in the orthorhombic Pbca space group (Supplementary Table 3), isoreticular with previous Zn-fa-datz (1). Both Zn2+ ions in Zn-fa-atz (2) exhibit tetrahedral coordination. Each Zn2+ ion is coordinated with three N atoms from three atz–, and one O atom from fa2– (Supplementary Fig. 13). Similar to Zn-fa-datz (1), Zn-fa-atz (2) also exhibits pcu topology, which is constructed by the Zn-atz layer based on the dinuclear [Zn2(atz)2] unit and the fa2– pillar, but there is an obvious slip between the pillar and the layer (Supplementary Figs. 1–2). The porosity of Zn-fa-atz (2) was calculated to be 46.3% (by PLATON54) which is larger than that of Zn-fa-datz (1) (38.9%) (Supplementary Table 1). Furthermore, due to the reduction of amino groups, there are fewer hydrogen bonds on the pore walls than Zn-fa-datz (1). For Zn-fa-atz (2), only one side of atz– ligands are tied to fa2– ligands through two O-H···N hydrogen bonding interactions (O-H···N = 2.12–2.47 Å, ∠O-H···N = 135.6–170.4°) (Fig. 2h and Supplementary Fig. 12). But in Zn-fa-datz (1), both sides of datz– ligand can connect with fa2– ligands by four hydrogen bonds. When the diagonals between four adjacent O atoms from different fa2– ligands were used to compare the pore sizes of the two structures (minus the van der Waals radius of O atom of 1.52 Å) (Supplementary Fig. 2)55, it can be seen that the difference in aperture between Zn-fa-atz (2) (5.5 × 4.9 Å) and Zn-fa-datz (1) (5.4 × 4.6 Å) is very small. In fact, debonding the hydrogen bonds causes the rotation of the five-member ring of atz– ligand, resulting in different dihedral angles between atz–/datz– and Zn-atz/datz layers (Fig. 2c, g). Therefore, the greater difference between the Zn-fa-atz (2) and Zn-fa-datz (1) is reflected in the size/shape of the pore and the local pore chemistry.
Thermogravimetry and PXRD data showed that Zn-fa-atz (2) can be fully exchanged with MeOH (Supplementary Figs. 3 and 6). The 195 K CO2 adsorption isotherm for Zn-fa-atz (2) shows a quasi-type-I characteristic. The pore volume was calculated to be 0.285 cm3 g–1 and 0.283 cm3 g–1 using the CO2 and N2 uptake measured at P/P0 = 0.96 and 0.95, respectively, which is comparable with the value calculated from single-crystal diffraction data at 195 K (0.319 cm3 g–1) (Fig. 3a, Supplementary Fig. 14 and Supplementary Table 1). Besides, it is worth to mention that Zn-fa-atz (2) can remain the crystalline and porosity after treated with water or exposed to moisture (ca. 35% RH) (Supplementary Fig. 15). The pore size distribution analysis based on the Horvath-Kawazoe model also reveals that the 1D channels of Zn-fa-atz (2) (6.3 Å) comparable with that of Zn-fa-datz (1) (6.1 Å), which is consistent with single-crystal analysis.
Adsorption and separation performances of Zn-fa-atz (2)
Single-component adsorption isotherms for CO2, C2H2, C2H4, and C2H6 in Zn-fa-atz (2) were measured at 273 K and 298 K (Fig. 3b and Supplementary Fig. 7). At low pressure and 298 K, similar with Zn-fa-datz (1), Zn-fa-atz (2) shows higher uptake for C2H6 and C2H2 than C2H4, indicating the selective adsorption of both adsorbates over C2H4. However, the CO2 uptake for Zn-fa-atz (2) is higher than that for C2H4, while the opposite was observed for Zn-fa-datz (1). At 298 K, the adsorption amount sequences of Zn-fa-atz (2) at 14 kPa, 25 kPa and 33 kPa are followed as C2H6 > C2H2 > CO2 > C2H4, C2H2 ≈ CO2 > C2H6 > C2H4, and CO2 ≈ C2H2 > C2H6 > C2H4, respectively (Supplementary Fig. 16). For Zn-fa-atz (2), the trend in the adsorption enthalpy (Qst) at the low loading is as the following: C2H6 (35.9 kJ mol–1) > C2H2 (30.6 kJ mol–1) > CO2 (30.2 kJ mol–1) > C2H4 (29.3 kJ mol–1) (Fig. 3d, Supplementary Figs. 7–9 and Supplementary Table 2), while the Qst order of Zn-fa-datz (1) is following as C2H6 (39.4 kJ mol–1) > C2H2 (34.7 kJ mol–1) > C2H4 (33.6 kJ mol–1) > CO2 (24.0 kJ mol–1). Interestingly, when compared with Zn-fa-datz (1), the C2H2/C2H4/C2H6 Qst for Zn-fa-atz (2) decreased synchronously and maintained the same sequence, while the CO2 Qst showed a significant increase—that is, Zn-fa-atz (2) reversed the C2H4/CO2 adsorption selectivity (Fig. 3c, Supplementary Figs. 10–11 and Supplementary Table 2). Although each of the ideal adsorbed solution theory (IAST) selectivity of the three gases to C2H4 are not very high (CO2/C2H4 = 1.4, C2H2/C2H4 = 1.5, C2H6/C2H4 = 1.4) (Supplementary Table 2), it is rare to achieve the preferential adsorption of CO2/C2H2/C2H6 over C2H4 at the same time, especially for components with the very close physicochemical properties. The IAST selectivities of Zn-fa-datz (1) and Zn-fa-atz (2) were compared with the best-performing sorbents in the C2H2/C2H4/C2H6 three-component system, and C2H2/C2H4/C2H6/CO2 four-component system (Supplementary Table 4). Both Zn-fa-datz (1) and Zn-fa-atz (2) show moderate selectivity for C2H2/C2H4, C2H6/C2H4 and CO2/C2H4. In fact, it is very difficult to maintain the lowest selectivity for C2H4 among the four gas components, because the physicochemical properties of the four gases are too similar. In general, for ultramicropores without specific binding sites (e.g., open-metal sites), the adsorption affinity mainly comes from the combination of various weak interactions (e.g., van der Waals forces and hydrogen bonding) between the guest molecule and the network in multiple orientations. Consequently, even a slight change in the pore size/shape and local pore chemistry can significantly affect the affinity. In case of Zn-fa-datz (1) and Zn-fa-atz (2), based on the SCXRD analysis, different amino groups not only change the local chemical environment of the pore, but also affect hydrogen bonds in the framework which further leads to the change in the size/shape of the channel (the spatial arrangement of the adsorption sites) (Fig. 2 and Supplementary Figs. 2 and 12).
Host-guest structure studies
To further understand the role of pore structure tuning, the host–guest structures of Zn-fa-datz (1) and Zn-fa-atz (2) were studied by the PXRD analyses and corresponding refinements (Fig. 4, Supplementary Figs. 17–20 and Supplementary Table 5). The eight studied hos–guest systems showed that all the gas molecules preferentially localized within the pockets enclosed by four triazolate moieties and four fa2– ligands. For C2H2/C2H4/C2H6, the host–guest interactions are mainly contributed by weak O/N···H–C hydrogen bonding interactions from multiple orientations. C2H2, C2H4, and C2H6 are all confined in the relatively spacious positions in the cavities of Zn-fa-datz (1) and Zn-fa-atz (2), but the molecular orientations change due to the difference in pore shape and pore chemistry. As shown in Fig. 4 and Supplementary Table 5, most measured O/N···H–C distances in Zn-fa-atz (2) are slightly longer than that in Zn-fa-datz (1), which is consistent with the synchronous decrease of the Qst for the three C2 hydrocarbons in Zn-fa-atz (2). For CO2 in Zn-fa-atz (2) (Fig. 4), the optimal position has changed when compared with that in Zn-fa-datz (1), and the O atom from the framework can contact closely with the C atom in CO2, yielding a relative strong interaction (C···O = 3.231 Å) that cannot be observed in Zn-fa-datz (1), resulting in higher CO2 Qst than that of Zn-fa-datz (1).
Dynamic breakthrough experiments of Zn-fa-atz (2) and Zn-fa-atz (2)/PES composite beads
To evaluate the gas separation performance, breakthrough experiments were performed with Zn-fa-atz (2). At 298 K and ambient pressure, C2H2/C2H4/C2H6/He and equimolar CO2/C2H2/C2H4/C2H6 mixtures were passed through the column packed with Zn-fa-atz (2) powder (Fig. 5). The outlet gases were monitored by the online gas chromatography. As shown in Fig. 5c, d, C2H4 breaks through first from the column at 15 min g–1 and 19 min g–1, respectively, which is consistent with the adsorption isotherms. Before the impurities flowed out, the purity of C2H4 at the outlet reached that of polymer grade (>99.9%) (Supplementary Fig. 21), demonstrating that Zn-fa-atz (2) achieved the one-step purification of C2H4 from both the C2H2/C2H4/C2H6/He and CO2/C2H2/C2H4/C2H6 mixtures. It is worth mentioning that the different gas elution orders of three- and four-component separation are related to the order of adsorption capacity of each gas at different partial pressures (Supplementary Table 6). In contrast, Zn-fa-datz (1) can only realize one-step C2H4 production from ternary C2H2/C2H4/C2H6 mixture. To test the recycling performance of Zn-fa-atz (2), three cycles of breakthrough and following desorption experiments were conducted (Supplementary Figs. 22–23). There was no significant change in the C2H4 retention time and the separation performance, revealing the favorable recyclability and facile regeneration of Zn-fa-atz (2). Moreover, the highly consistent breakthrough data from three different batches of samples also fully verified the reproducibility of the samples and experiments (Supplementary Fig. 24). The simulated breakthrough curves were conducted to further validate the feasibility of Zn-fa-atz (2) for the separation performance (Supplementary Fig. 25), which is highly consistent with our experimental results. However, when Zn-fa-atz (2) was exposed to wet quaternary mixtures (ca. 36% RH), the breakthrough curves showed that Zn-fa-atz (2) can maintain the elution sequence, but the retention times and the shape of the breakthrough curves have changed significantly, indicating the competitive adsorption of water with the other four gases (Supplementary Fig. 26).
To verify the competitive adsorption during the breakthrough experiments, we calculated the actual uptakes of Zn-fa-datz (1) and Zn-fa-atz (2) for the four gases using the reported method (Supplementary Figs. 27–28 and Supplementary Tables 7–8)56,57,58. The results show that the actual selectivities are little different from that of IAST selectivities. For Zn-fa-atz (2), the adsorption amount order of each gas is followed as CO2 > C2H2 > C 2H6 > C2H4, being similar with the isotherms, but the selectivity changed in CO2/C2H4 (Sbreakthrough = 2.17 > SIAST = 1.4). For Zn-fa-datz (1), the adsorption amount order for each gas is followed as C2H2 > C2H6 > CO2 > C2H4, which is inconsistent with that of the isotherms (C2H2 > C2H6 > C2H4 > CO2), and the selectivity of CO2/C2H4 also changed (Sbreakthrough = 1.27 > SIAST = 0.8). Obviously, both Zn-fa-atz (2) and Zn-fa-datz (1) have different degrees of increase in the adsorption of CO2 in the breakthrough experiments. Therefore, the diffusion coefficients of the four gases through the adsorption kinetic profiles at 298 K (Supplementary Fig. 29) were calculated. The results showed that the diffusion of CO2 (0.3874) was significantly higher than that of C2H4 (0.1191), C2H2 (0.0820), and C2H6 (0.0478), indicating CO2 diffused much faster than other three gases during the breakthrough experiments. Therefore, the larger uptakes of CO2 are the result of the synergistic effect of adsorption thermodynamics and kinetics.
In addition, for practical industrial applications, the Zn-fa-atz (2) crystals were shaped into spherical pellets, with addition of organic polymer binder. In presence of 20 wt% of poly-ether sulfone (PES) as the binder, the Zn-fa-atz (2)/PES composite beads with a diameter of ca. 2.5 mm were successfully fabricated via the phase inversion method (Supplementary Fig. 30). The scanning electron microscope (SEM) images show Zn-fa-atz (2) crystals (ca. 500 nm) are well embedded within the inner polymer matrix (Supplementary Fig. 30b, c). The CO2 adsorption isotherm at 195 K of Zn-fa-atz (2)/PES also shows a quasi-type-I characteristic, indicating the microporosity of the beads (Supplementary Figs. 30d, e and 31). The pore volume was calculated to be 0.265 cm3 g–1 at P/P0 = 0.96 (7% lower than that of pure Zn-fa-atz (2) crystal sample), suggesting that Zn-fa-atz (2)/PES retains most of the porosity. Further, the kinetic adsorption profiles for C2H6 were measured at 298 K and 1 atm. The diffusional rate constants (k)59 for C2H6 in Zn-fa-atz (2)/PES was calculated to be 1.1437, which is within the vicinity of that for the Zn-fa-atz (2) powder (k = 1.2706), meaning that compositing has little effect on the gas diffusion (Supplementary Fig. 32). The equimolar CO2/C2H2/C2H4/C2H6 mixture breakthrough experiment was further tested with Zn-fa-atz (2)/PES beads-packed column at room temperature. As shown in Supplementary Fig. 30f, C2H4 breakthrough first at 18 min g–1, following by C2H6, CO2, and C2H2, indicating the effective one-step C2H4 production ability from quaternary mixture after shaping Zn-fa-atz (2) into PES-based spherical pellets.
Discussion
In conclusion, fine-tuning pore size/shape and local pore chemistry by regulating the network hydrogen bonding interactions in two related coordination networks can precisely control the adsorption selectivity of C2H4 in the complex separation systems. The reported ultramicroporous adsorbent, Zn-fa-atz (2), can achieve the effective one-step purification of C2H4 from CO2/C2H2/C2H4/C2H6 quaternary mixture. Design principle presented here could be helpful to advance the new-generation physisorbent synthesis and application for more complex industry-related separation system.
Methods
Synthesis of Zn-fa-datz (1)
According to the reported procedures with a little modification52. Zn(NO3)2•6H2O (1.0 mmol, 0.298 g), fumaric acid (H2fa, 0.5 mmol, 0.058 g), 1H-1,2,4-triazole-3,5-diamino (Hdatz, 1.0 mmol, 0.099 g) were dissolved in 10 mL DMF/MeOH/H2O mixed solution (4:4:2, v/v/v). After 30 min of sonication treatment, the resulting solution was sealed in a 25 mL Teflon-lined stainless-steel autoclave and heated at 130 °C under autogenous pressure for 72 h. After slowly cooling down to room temperature, the colorless crystals of Zn-fa-datz (1) were washed with DMF/MeOH (1:1, v/v) mixed solution for three times, and dried at room temperature (yield = 48% based on Zn). The obtained sample was exchanged with fresh MeOH three times daily for three days.
Synthesis of Zn-fa-atz (2)
Zn(NO3)2·6H2O (1.0 mmol, 0.298 g), fumaric acid (H2fa, 0.5 mmol, 0.058 g), 3-amino-1,2,4-triazole (Hatz, 1.0 mmol, 0.084 g) were dissolved in 10 mL DMF/MeOH/H2O mixed solution (4:4:2, v/v/v). After 30 min of sonication, the resulting solution was sealed in a 25 mL Teflon-lined stainless-steel autoclave and heated at 130 °C under autogenous pressure for 72 h. After slowly cooling down to room temperature, the colourless crystals of Zn-fa-atz (2) were washed with fresh DMF/MeOH (1:1, v/v) mixed solution for three times, and dried at room temperature (yield = 52% based on Zn). The obtained sample was exchanged with fresh MeOH three times daily for three days.
Gas adsorption measurements
The thermodynamic adsorption isotherms for CO2, C2H2, C2H4, and C2H6 were conducted on 3FLEX (Micromertics). Before the N2 (77 K)/CO2 (195 K) adsorption measurement, Zn-fa-atz (2) powder, Zn-fa-datz (1) powder and Zn-fa-atz (2)/PES beads (~100 mg) were evacuated under a dynamic vacuum at 75 °C for 4 h to remove the guest molecules.
Dynamic breakthrough experiments
Before breakthrough experiments, the samples were packed in a column and activated in-situ by heating at 75 °C for 20 h in a He flow with rate of 20 mL/min, and then cooled to room temperature. Then the gas flow is switched to the desired gas mixture (v(He)/v(C2H2)/v(C2H4)/v(C2H6) = 58:14:14:14, v(CO2)/v(C2H2)/v(C2H4)/v(C2H6) = 25:25:25:25). The dynamic breakthrough data were recorded on a homemade apparatus at room temperature and 1 atm. The gas stream concentration at column outlet was continuously detected by using a chromatographic analyzer (TCD-Thermal Conductivity Detector, detection limit 0.1 ppm). After equilibrium, desorption curves of Zn-fa-atz (2) in Supplementary Fig. 23 was collected under a He flow of 20 mL/min at 70 °C.
Reporting summary
Further information on research design is available in the Nature Portfolio Reporting Summary linked to this article.
Data availability
For full characterization data including detailed sorption and breakthrough experiments data see the Supplementary Methods 3 and 5. All data supporting the finding of this study are available within this article and its Supplementary Information. Crystallographic data for Zn-fa-atz (2) reported in this article have been deposited at the Cambridge Crystallographic Data Centre, under deposition numbers CCDC 2176255-2176256. Copies of the data can be obtained free of charge via https://www.ccdc.cam.ac.uk/structures/. Source data of the PXRD patterns, TGA curves, sorption tests; gas adsorption enthalpies and selectivities, Rietveld refinement of powder X-ray diffraction tests and breakthrough tests that support the findings of this study are provided as a Source Data file (ref. 60. Rong, Y. (2023): Source data of Zn-fa-datz (1) and Zn-fa-atz (2) that support the findings of this study.xlsx. Data sets. figshare https://doi.org/10.6084/m9.figshare.24864540). Source data are provided with this paper.
References
Yang, Y. et al. Ethylene/ethane separation in a stable hydrogen-bonded organic framework through a gating mechanism. Nat. Chem. 13, 933–939 (2021).
Chen, K. et al. Synergistic sorbent separation for one-step ethylene purification from a four-component mixture. Science 366, 241–246 (2019).
Bao, Z. et al. Potential of microporous metal–organic frameworks for separation of hydrocarbon mixtures. Energy Environ. Sci. 9, 3612–3641 (2016).
Ren, T., Patel, M. & Blok, K. Olefins from conventional and heavy feedstocks: energy use in steam cracking and alternative processes. Energy 31, 425–451 (2006).
Angelini, P. et al. Materials for Separation Technologies: Energy and Emission Reduction Opportunities. (Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States), 2005).
Li, J., Kuppler, R. J. & Zhou, H. Selective gas adsorption and separation in metal–organic frameworks. Chem. Soc. Rev. 38, 1477–1504 (2009).
Zhou, H. & Kitagawa, S. Metal-organic frameworks (MOFs). Chem. Soc. Rev. 43, 5415–5418 (2014).
Li, H. et al. Porous metal-organic frameworks for gas storage and separation: Status and challenges. EnergyChem 1, 100006 (2019).
Zhou, D. et al. Adsorptive separation of carbon dioxide: from conventional porous materials to metal–organic frameworks. EnergyChem 1, 100016 (2019).
Wang, H., Liu, Y. & Li, J. Designer metal–organic frameworks for size‐exclusion‐based hydrocarbon separations: progress and challenges. Adv. Mater. 32, 2002603 (2020).
Kitagawa, S., Kitaura, R. & Noro, S. I. Functional porous coordination polymers. Angew. Chem. Int. Ed. 43, 2334–2375 (2004).
Perry, J. J. IV, Perman, J. A. & Zaworotko, M. J. Design and synthesis of metal–organic frameworks using metal–organic polyhedra as supermolecular building blocks. Chem. Soc. Rev. 38, 1400–1417 (2009).
Krause, S. et al. A pressure-amplifying framework material with negative gas adsorption transitions. Nature 532, 348–352 (2016).
Zhou, D. & Zhang, J. On the role of flexibility for adsorptive separation. Acc. Chem. Res. 55, 2966–2977 (2022).
Zhou, M., El-Sayed, E. S. M., Ju, Z., Wang, W. & Yuan, D. The synthesis and applications of chiral pyrrolidine functionalized metal–organic frameworks and covalent-organic frameworks. Inorg. Chem. Front. 7, 1319–1333 (2020).
Cui, X. et al. Pore chemistry and size control in hybrid porous materials for acetylene capture from ethylene. Science 353, 141–144 (2016).
Li, B. et al. An ideal molecular sieve for acetylene removal from ethylene with record selectivity and productivity. Adv. Mater. 29, 1704210 (2017).
Zhang, Y. et al. Rational design of microporous MOFs with anionic boron cluster functionality and cooperative dihydrogen binding sites for highly selective capture of acetylene. Angew. Chem. Int. Ed. 59, 17664–17669 (2020).
Zhang, Z. et al. Efficient trapping of trace acetylene from ethylene in an ultramicroporous metal–organic framework: synergistic effect of high‐density open metal and electronegative sites. Angew. Chem. Int. Ed. 59, 18927–18932 (2020).
Dong, Q. et al. Shape- and size-dependent kinetic ethylene sieving from a ternary mixture by a trap-and-flow channel crystal. Adv. Funct. Mater. 32, 2203745 (2022).
Xue, Y. et al. Precise pore space partitions combined with high-density hydrogen-bonding acceptors within metal–organic frameworks for highly efficient acetylene storage and separation. Angew. Chem. Int. Ed. 60, 10122–10128 (2021).
Wang, J. et al. De-linker-enabled exceptional volumetric acetylene storage capacity and benchmark C2H2/C2H4 and C2H2/CO2 separations in metal-organic frameworks. Angew. Chem. Int. Ed. https://doi.org/10.1002/anie.202217839 (2023).
Shen, J. et al. Simultaneous interlayer and intralayer space control in two-dimensional metal−organic frameworks for acetylene/ethylene separation. Nat. Commun. 11, 6259 (2020).
Bloch, E. D. et al. Hydrocarbon separations in a metal-organic framework with open iron (II) coordination sites. Science 335, 1606–1610 (2012).
Liao, P., Zhang, W., Zhang, J. & Chen, X. Efficient purification of ethene by an ethane-trapping metal-organic framework. Nat. Commun. 6, 8697 (2015).
Li, L. et al. Ethane/ethylene separation in a metal-organic framework with iron-peroxo sites. Science 362, 443–446 (2018).
Lin, R. et al. Molecular sieving of ethylene from ethane using a rigid metal–organic framework. Nat. Mater. 17, 1128–1133 (2018).
Gu, C. et al. Design and control of gas diffusion process in a nanoporous soft crystal. Science 363, 387–391 (2019).
Li, Y. et al. Ultrahigh-uptake capacity-enabled gas separation and fruit preservation by a new single-walled nickel–organic framework. Adv. Sci. 8, 2003141 (2021).
Wang, G. et al. Boosting ethane/ethylene separation by mofs through the amino-functionalization of pores. Angew. Chem. Int. Ed. 61, e202213015 (2022).
Geng, S. et al. Scalable room-temperature synthesis of highly robust ethane-selective metal–organic Frameworks for Efficient Ethylene Purification. J. Am. Chem. Soc. 143, 8654–8660 (2021).
Zhang, J. & Chen, X. Optimized acetylene/carbon dioxide sorption in a dynamic porous crystal. J. Am. Chem. Soc. 131, 5516–5521 (2009).
Zhang, L. et al. Benchmark C2H2/CO2 separation in an ultra-microporous metal-organic framework via Copper(I)-alkynyl chemistry. Angew. Chem. Int. Ed. 60, 15995–16002 (2021).
Li, H. et al. An unprecedented pillar-cage fluorinated hybrid porous framework with highly efficient acetylene storage and separation. Angew. Chem. Int. Ed. 60, 7547–7552 (2021).
Di, Z. et al. Cage-like porous materials with simultaneous high C2H2 storage and excellent C2H2/CO2 separation performance. Angew. Chem. Int. Ed. 60, 10828–10832 (2021).
Yang, L. et al. Adsorption site selective occupation strategy within a metal–organic framework for highly efficient sieving acetylene from carbon dioxide. Angew. Chem. Int. Ed. 133, 4620–4624 (2021).
Reid, C. R. & Thomas, K. M. Adsorption kinetics and size exclusion properties of probe molecules for the selective porosity in a carbon molecular sieve used for air separation. J. Phys. Chem. B 105, 10619–10629 (2001).
Sircar, S. Basic research needs for design of adsorptive gas separation processes. Ind. Eng. Chem. Res. 45, 5435–5448 (2006).
Eguchi, R., Uchida, S. & Mizuno, N. Inverse and High CO2/C2H2 sorption selectivity in flexible organic–inorganic ionic crystals. Angew. Chem. Int. Ed. 51, 1635–1639 (2012).
Hao, H. et al. Simultaneous trapping of C2H2 and C2H6 from a ternary mixture of C2H2/C2H4/C2H6 in a robust metal-organic framework for the purification of C2H4. Angew. Chem. Int. Ed. 130, 16299–16303 (2018).
Wang, Y. et al. One-step ethylene purification from an acetylene/ethylene/ethane ternary mixture by cyclopentadiene cobalt-functionalized metal-organic frameworks. Angew. Chem. Int. Ed. 60, 11350–11358 (2021).
Wang, G. et al. One-step C2H4 purification from ternary C2H6/C2H4/C2H2 mixtures by a robust metal-organic framework with customized pore environment. Angew. Chem. Int. Ed. 61, https://doi.org/10.1002/anie.202205427 (2022).
Gu, X. et al. Immobilization of lewis basic sites into a stable ethane-selective MOF enabling one-step separation of ethylene from a ternary mixture. J. Am. Chem. Soc. 144, 2614–2623 (2022).
Yang, S. et al. Efficient purification of ethylene from C2 hydrocarbons with an C2H6/C2H2-selective metal-organic framework. ACS Appl. Mater. Interfaces 13, 962–969 (2021).
Jiang, Z. et al. An aromatic-rich cage-based MOF with inorganic chloride ions decorating the pore surface displaying the preferential adsorption of C2H2 and C2H6 over C2H4. Inorg. Chem. Front. 8, 1243–1252 (2021).
Fan, L. et al. Rational construction and performance regulation of an In(III)–tetraisophthalate framework for one-step adsorption-phase purification of C2H4 from C2 hydrocarbons. Inorg. Chem. 60, 10819–10829 (2021).
Xu, Z. et al. A robust Th-azole framework for highly efficient purification of C2H4 from a C2H4/C2H2/C2H6 mixture. Nat. Commun. 11, 3163 (2020).
Zhang, P. et al. Synergistic binding sites in a hybrid ultramicroporous material for one-step ethylene purification from ternary C(2) hydrocarbon mixtures. Sci. Adv. 8, https://doi.org/10.1126/sciadv.abn9231 (2022)
Cao, J. et al. One-step ethylene production from a four-component gas mixture by a single physisorbent. Nat. Commun. 12, 6507 (2021).
Laha, S. et al. Tailoring Robust Al-MOF for Trapping C2H6 and C2H2 towards Efficient C2H4 purification from quaternary mixtures. Chem. Sci. 13, 7172–7180 (2022).
Zhang, T. et al. General pore features for one-step C2H4 production from a C2 hydrocarbon mixture. Chem. Commun. 58, 4954–4957 (2022).
Xing, G., Liu, Q., Zhang, Y., Zhang, S. & Dong, Y. Microporous Zinc (II) metal‐organic framework with 6‐Connected pcu topology: synthesis, structure, and gas adsorption properties. Z. Anorg. Allg. Chem. 641, 1556–1559 (2015).
Mukherjee, S., Sensharma, D., Chen, K. & Zaworotko, M. Crystal engineering of porous coordination networks to enable separation of C2 hydrocarbons. Chem. Commun. 56, 10419–10441 (2020).
Spek, A. L. Single-crystal structure validation with the program PLATON. J. Appl. Crystallogr. 36, 7–13 (2003).
Bondi, A. Van der Waals volumes and radii. J. Phys. Chem. 68, 441–451 (1964).
Wang, Y. et al. Selective aerobic oxidation of a metal-organic framework boosts thermodynamic and kinetic propylene/propane selectivity. Angew. Chem. Int. Ed. 58, 7692–7696 (2019).
Zhang, X. W. et al. Tuning the gating energy barrier of metal-organic framework for molecular sieving. Chem 7, 1006–1019 (2021).
Ye, Z. M. et al. A hydrogen-bonded yet hydrophobic porous molecular crystal for molecular-sieving-like separation of butane and isobutane. Angew. Chem. Int. Ed. 59, 23322–23328 (2020).
Fletcher, A. J. et al. Adsorption dynamics of gases and vapors on the nanoporous metal organic framework material Ni2(4,4’-bipyridine)3(NO3)4: guest modification of host sorption behavior. J. Am. Chem. Soc. 123, 10001–10011 (2001).
Yang, R. et al. Source data of Zn-fa-datz (1) and Zn-fa-atz (2) that support the findings of this study. Data sets. figshare https://doi.org/10.6084/m9.figshare.24864540 (2023).
Dubbeldam, D., Calero, S. & Vlugt, T. J. iRASPA: GPU-accelerated visualization software for materials scientists. Mol. Simulat. 44, 653–676 (2018).
Acknowledgements
We appreciate the financial support from the National Natural Science Foundation of China (22071195, K.-J. C., 22101231, Y.W.), the Youth Innovation Team of Shaanxi Universities and China Postdoctoral Science Foundation (No. 2022M712585, T.Z.). We are also thankful for the help from Prof. Dr. Bao-Yong Zhu, Prof. Dr. Hui Wang and Mr. You Wang. T.P. and K.A.F. acknowledge the use of services provided by Research Computing at the University of South Florida.
Author information
Authors and Affiliations
Contributions
K.-J.C. designed the project. R.Y., Y.W., J-W.C., T.G., X.-O.X. and Q.-H.Y. synthesized the compounds, J.-W.C., X.J., R.Y., Y.W. and T.G. collected all adsorption data. T.P. and K.A.F. participated in the separation mechanism discussion. R.Y., Y.W. and J-W.C. collected the experimental breakthrough data. R.K. carried out the breakthrough simulation. H.C. and L.Li participated in the breakthrough simulation discussion. Y.W. and T.G. collected the SEM data. R.Y. and Y.W. analyzed the adsorption data and experimental breakthrough data. Y.W., B.-K.L. and T.Z. analyzed the single crystal data, Y.W. and Z.-M.Y. collected and analyzed the powder refinement data. Y.W., R.Y. and K.-J.C. wrote the paper, and all authors contributed to revise the manuscript.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Peer review
Peer review information
Nature Communications thanks Ho Bum Park, and the other, anonymous, reviewer(s) for their contribution to the peer review of this work. A peer review file is available.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Source data
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Yang, R., Wang, Y., Cao, JW. et al. Hydrogen bond unlocking-driven pore structure control for shifting multi-component gas separation function. Nat Commun 15, 804 (2024). https://doi.org/10.1038/s41467-024-45081-w
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-024-45081-w
- Springer Nature Limited