Abstract
Topological protection ensures stability of information and particle transport against perturbations. We explore experimentally and computationally the topologically protected transport of magnetic colloids above spatially inhomogeneous magnetic patterns, revealing that transport complexity can be encoded in both the driving loop and the pattern. Complex patterns support intricate transport modes when the microparticles are subjected to simple time-periodic loops of a uniform magnetic field. We design a pattern featuring a topological defect that functions as an attractor or a repeller of microparticles, as well as a pattern that directs microparticles along a prescribed complex trajectory. Using simple patterns and complex loops, we simultaneously and independently control the motion of several identical microparticles differing only in their positions above the pattern. Combining complex patterns and complex loops we transport microparticles from unknown locations to predefined positions and then force them to follow arbitrarily complex trajectories concurrently. Our findings pave the way for new avenues in transport control and dynamic self-assembly in colloidal science.
Similar content being viewed by others
Introduction
The transport of microscopic colloidal particles suspended in fluids is relevant for a wide range of physical and biological phenomena including sedimentation1, drug delivery2,3,4, self-assembly5,6,7, microfluidic devices8,9,10,11,12,13, and active systems14,15,16. External fields are often used to control the motion of colloidal particles17,18,19. These include spatially uniform fields such as gravitational20, electric21, and magnetic22,23,24 fields, as well as spatially inhomogeneous fields such as the manipulation of colloidal particles with optical tweezers25. Directed colloidal transport can be achieved via Brownian motors26,27,28 that combine non-equilibrium fluctuations with spatially inhomogeneous energy landscapes29,30,31.
Usually, the colloidal particles are transported along the same direction but the simultaneous transport of different particles across different directions is useful and even a requisite in systems of various length scales. For example, the transport of cargo on traffic networks requires organizing various subtasks simultaneously32. Sorting of microparticles driven on periodic lattices is possible because the particles travel along different directions depending on, e.g. their size33,34,35,36. In biology, the metabolism and structural diversity of the cell demand the regulation of a vast array of molecular traffic across intracellular and extracellular membranes.
In previous work, we have shown that robust, multidirectional, and simultaneous control of colloidal particles that differ in, e.g. their magnetic properties can be achieved with topological protection37,38. As illustrated in Fig. 1a, paramagnetic particles are placed above a periodic magnetic pattern made of regions of positive and negative magnetizations normal to the pattern. A uniform external magnetic field of varying orientation drives the motion. The particles are transported following the minima of the periodic magnetic potential which results from the interplay between the complex but static field of the pattern and the simple but time-dependent uniform external field. The orientation of the magnetic field varies in time-performing loops. Hence, after one loop the orientation returns to its initial value. Loops that wind around specific orientations induce the transport of the colloidal particles by one unit cell of the magnetic pattern. During the loop, minima of the magnetic potential cross from one unit cell to the adjacent. Once the loop ends, the particle is in a position equivalent to the initial one but in a different unit cell. The motion is topologically protected in the sense that the precise shape of the loop is irrelevant. Only the set of winding numbers of the modulation loop around the specific orientations (the topological invariant) determines the transport direction. The motion is therefore robust against perturbations.
The specific orientations of the external field that are relevant to control the motion depend on both the symmetry of the pattern37 (e.g. square vs. hexagonal) and the particle properties. Hence, particles with different properties, e.g. paramagnetic and diamagnetic particles above hexagonal magnetic patterns39 as well as micro-rods of different lengths38, can be transported in different directions independently and simultaneously using periodic patterns. However, the use of periodic patterns imposes several limitations on the transport. All particles that belong to the same topological class (e.g. identical paramagnetic particles or rods of the same length) are transported along the same direction, independently of their absolute position above the pattern as schematically represented in Fig. 1a. In addition, the location of the particles above the pattern is unknown a priori and it must be determined externally via, e.g. direct visualization via microscopy.
These limitations are overcome here using inhomogeneous (non-periodic) patterns. We make either the symmetry, Fig. 1b, or the global orientation, Fig. 1c, of the magnetic pattern dependent on the absolute position above the pattern. As a result, the specific orientations of the external field that control the motion depend also on the space coordinate. The direction of the transport can then be locally controlled by the modulation loop of the external field and also via the local symmetry of the inhomogeneous magnetic pattern. We can imprint the complexity of the transport mainly to the pattern, and then use simple loops to generate complex transport as illustrated in Fig. 1b. Following this idea we create non-periodic patterns that transport the particles to a desired position by just repeating simple modulation loops. We also create patterns in which the colloidal particles follow arbitrarily complex trajectories driven by a simple time-periodic modulation loop. Additionally, we create simple patterns and encode the complexity of the transport in the modulation loops as sketched in Fig. 1c. This allows us to simultaneously and independently control the transport of identical colloidal particles located at different positions above the pattern. We design for example a complex modulation loop that controls the transport of 18 identical colloidal particles individually and simultaneously. Beyond its fundamental interest, our work opens a new route to control the transport in colloidal systems with potential applications in reconfigurable self-assembly40,41,42,43.
Results
The plane in which the particles move (action space) splits into allowed and forbidden regions. In the allowed (forbidden) regions the stationary points of the magnetic potential are minima (saddle points). The boundaries between allowed and forbidden regions in action space are the fences. The position of the fences in control space \({{{{{{{\mathcal{C}}}}}}}}\) (a sphere that represents all possible orientations of the external field) depends on the symmetry of the pattern and it determines the loops that induce colloidal transport (see Fig. 1). An extended summary of the transport in periodic patterns37 is provided in Supplementary Note 1 and Supplementary Figs. 1 and 2.
Here we focus on transport in inhomogeneous patterns. Sophisticated transport modes can be achieved by adding complexity to either the patterns, the loops, or to both of them. We see examples of each type in the following sections. Details about the experiments and computer simulations are given in the “Methods” section.
Complex patterns and simple loops
There is a full family of periodic hexagonal patterns characterized by the value of the symmetry phase ϕ (see the “Methods” section) and illustrative examples in Fig. 1b. We render the symmetry phase a continuous function of the position, which creates an inhomogeneous symmetry phase modulated pattern such as the example in Fig. 1b. For slow enough spatial changes of the symmetry phase, the cells of the modulated pattern deviate only weakly from the Wigner–Seitz cells of corresponding periodic patterns with fixed values of the symmetry phase. Hence, knowing how to control the transport in periodic patterns is enough to control the transport in inhomogeneous situations.
We focus first on complex inhomogeneous patterns designed to achieve locally different transport for a single specific task. Most of the complexity of the transport is embedded in the pattern and therefore the modulation loops of the external field are simple.
Topological defect in the symmetry phase
We show in Fig. 2 a symmetry phase modulated hexagonal pattern. The details to generate the pattern are given in the “Methods” section. Each time we wind around the center of the pattern we go through the full family of hexagonal patterns exactly once (including the inverse patterns with opposite magnetization) and return to the initial symmetry phase. This introduces a topological defect at the center of the pattern where the symmetry phase is not well defined.
The symmetry phase is constant along radial directions and the modulation is weak everywhere except near the defect. To illustrate this, we have dissected the pattern into hexagonal cells in Fig. 2a. We also show enlarged Wigner Seitz cells of periodic patterns with a symmetry phase corresponding to that of the radial ray of the inhomogeneous pattern. The Wigner Seitz cells of the periodic patterns resemble closely the cells of the inhomogeneous pattern, even in the proximity of the central defect. It is therefore expected that the transport in the inhomogeneous pattern can be understood in terms of the transport in periodic patterns.
The location of the fences in the control space varies substantially as we wind around the defect in the action space. (See the stereographic projections of control space for selected values of the symmetry phase in Fig. 2a and Supplementary Fig. 1.) Hence, it is possible to transport the microparticles into different directions depending on the sector of the pattern. In particular, we can construct modulation loops that use the central defect of the pattern as either an attractor or a repeller of colloidal particles.
A stereographic projection of the modulation loop that attracts the particles towards the defect is shown in Fig. 2a next to each enlarged Wigner–Seitz cell. The loop is made of two subloops. Only one of the subloops is active (green) for each value of the symmetry phase ϕ. The subloop is active in the sense that it induces net transport for those particles located in sectors of the pattern with that value of ϕ. The other subloop is inactive (red) in the sense that after one complete subloop, the particle returns to its position and hence there is no net transport. Using two subloops we control simultaneously the transport direction in sectors of the pattern with opposite magnetization (different values of the symmetry phase). Note for example how the active subloop in regions with C6 symmetry (ϕ = 0) becomes the inactive subloop in those regions with an inverse pattern \(\overline{\,{{\mbox{C}}}\,{}_{6}{{\mbox{}}}}\) (ϕ = ± π/3) and vice versa (see Fig. 2a). To induce transport a subloop must wind around at least three bifurcation points of the fences in control space \({{{{{{{\mathcal{C}}}}}}}}\), as explained in the Supplementary Note 1. Recall that control space is simply the surface of a sphere in which each point corresponds to one orientation of the external magnetic field. The bifurcation points are the points in which two segments of the fences meet in \({{{{{{{\mathcal{C}}}}}}}}\), see examples in Supplementary Fig. 2.
The complete attractor loop, made of two subloops, induces four different transport directions (along ±a1 and along ±a3) depending on the value of the symmetry phase (see Fig. 2a). Here, ai, i = 1, 2, 3 are three lattice vectors of the periodic hexagonal pattern (see Fig. 2 and the “Methods” section). The transition between the different transport directions, e.g. from +a3 to −a1, occurs at specific values of the symmetry phase that can be adjusted with the loop. See the transition lines (dashed-black lines) in Fig. 2a.
By controlling the location of the transition lines we fix whether the defect acts as an attractor or a repeller of particles (see Fig. 2b). In both cases, the particles wind clockwise around the defect. Instead of changing the position of the transition lines, we could also control whether the defect attracts or repels microparticles by reversing the direction of the transport. However, this requires a complete redesign of the modulation loop. Simply reversing the direction of the modulation loop does not reverse in general the transport direction in the whole pattern due to the occurrence of non-time reversal ratchets in hexagonal patterns37,39.
In Fig. 3a, b we show the trajectories of a colloidal particle located above the defect pattern according to Brownian dynamics simulations. The particle is randomly initialized above the pattern and then subjected to several repetitions of the attractor loop shown in Fig. 2. We also show the trajectory followed by the particle under the repetition of the repeller loop, depicted in Fig. 3c. The repeller and the attractor loops have similar shapes since they differ only in the values of ϕ at which the transport direction changes. The corresponding experimental trajectories are shown in Fig. 3d. In the experiments, there are several colloidal particles that are initially located above the pattern in random positions. If the attractor loop is repeated enough times, one colloidal particle will have reached the defect with almost certainty. Once a particle reaches the defect it stays there. In the experiments, further colloidal particles that try to enter the defect are repelled by the particle already occupying the center via dipolar repulsion. We can thus use the attractor loop to initialize one microparticle in the defect center. Whereas the location prior to the action of the attractor loop was unknown, it is known after the repeated application of the loop. The topological initialization is robust to thermal fluctuations. Brownian dynamics simulations of colloidal particles at higher temperatures still initialize the location of the defect. We briefly discuss the effect of finite temperature in the “Methods” section and Supplementary Fig. 4.
Encoding complex trajectories in the pattern
Patterns with spatial modulation of the symmetry phase can be used to encode arbitrarily complex particle trajectories. The patterns are designed to induce the desired trajectory when the particles are subjected to the repetition of a simple modulation loop of the orientation of the external field. The modulation loop transports particles along all possible directions in hexagonal patterns, i.e. along ±ai with i = 1, 2, 3, but in a way that only one direction is active for a given value of the symmetry phase. For example, particles on top of regions with C6 symmetry are transported towards −a3. The transport direction changes at specific values of the symmetry phase determined by the modulation loop. In Fig. 4a we show the modulation loop together with the representative fences and the resulting transport direction for each value of the symmetry phase.
The detailed procedure to generate the patterns is described in the “Methods” section and Supplementary Fig. 3. In essence, we first draw the trajectories that the particles should follow by hand. Then, at each position along the trajectory, we encode the transport direction using the value of the symmetry phase. Finally, the value of the symmetry phase at each point in the complete pattern is calculated as a spatially resolved weighted average of the symmetry phase along the trajectory. As a result, the symmetry phase varies smoothly across the pattern except for the occurrence of string-like topological defects in the symmetry phase.
Figure 4b shows a symmetry phase modulated pattern together with the corresponding simulated particle trajectories. The value of the symmetry phase is color-coded (see color bar). The pattern is designed to transport the particles along one stable trajectory that forms a closed loop resembling the letter “B”. In Fig. 4b we have highlighted the stable trajectory with a thick green line. Most particles above the pattern either enter the stable trajectory or leave the pattern. Occasionally one particle gets stuck in specific regions of the pattern. This can potentially be avoided by the introduction of random fluctuations in the modulation loop. In the presence of strong Brownian motion, the stable trajectories broaden to a width of a few unit cells, and additional stable trajectories might occur.
Corresponding experimental trajectories are shown in Fig. 4c. Even though the agreement is not perfect, the experimental trajectories follow closely the prescribed letter “B”, demonstrating, therefore, the potential of the method. Small variations in the position of the fences due to the imperfections of the pattern are likely the reason behind the deviations shown in the experiments. Fine-tuning the modulation loop and the height of the particles above the pattern would likely improve the results.
Simple patterns and complex loops
We follow now the opposite approach by encoding the complexity in the modulation loop. We create simple inhomogeneous patterns by concatenating large patches of periodic square patterns. The patches differ in the global orientation of the lattice vectors given by a global phase ψ (see the “Methods” section). Each (simple) patch allows for a rich variety of transport tasks. The task in each patch can be controlled individually and simultaneously using rather complex modulation loops in control space.
The fences of the C4 square pattern are four equidistant points on the equator (see Supplementary Note 1). The four fence points in \({{{{{{{\mathcal{C}}}}}}}}\) correspond to external fields pointing along the positive and negative directions of the lattice vectors37,44, i.e. along ±a1 and ±a2. Therefore, rotating the lattice vectors also rotates the position of the fences in control space. Thus, it is possible to construct loops that wind around different fences in \({{{{{{{\mathcal{C}}}}}}}}\), and hence induce different transport directions, depending on the orientation of the pattern ψ. An illustration is shown in Fig. 5a.
Since the fences are points in \({{{{{{{\mathcal{C}}}}}}}}\) it is in principle possible to concatenate an arbitrarily large number of patches with different orientations and control the motion in each of them independently. In practice, limiting factors might appear due to e.g. imperfections in the patterns that effectively make the fences in \({{{{{{{\mathcal{C}}}}}}}}\) extended regions, the angular resolution with which the orientation of the external field can be controlled, and the presence of Brownian motion. Due to the limiting factors, two patterns can be resolved independently if they are rotated by an angle of at least Δψ. Hence, the maximum number of patches that can be controlled independently is (π/2)/Δψ since after a rotation of π/2 a C4 pattern repeats itself (and so do the fences).
With a resolution Δψ = 5° it is then possible to control the motion in up to 18 patches independently. As an example we program a single loop in \({{{{{{{\mathcal{C}}}}}}}}\) that writes the first eighteen letters of the alphabet simultaneously, (see Fig. 5b and Supplementary Movie 3). Note that the letters are rotated by an angle ψ. For simplicity, we have designed an algorithm to write custom trajectories in a square pattern with global orientation ψ = 0. Next, we apply a global rotation to the modulation loop to control the transport in patterns with a generic orientation ψ. As a result, the trajectories are also rotated.
The loop that writes the first 18 letters of the alphabet contains 2086 simple commands. Each command is a small closed subloop that either transports a particle in one unit cell along the four possible directions of the square lattice or leaves the particle in the same position, similar to the loops in Fig. 5a. Even though an angular resolution of Δψ = 5° is achievable experimentally, the number of commands required by the complete loop exceeds our current experimental capabilities. Nevertheless, we show in Fig. 5c, the experimental trajectories of a simplified loop that writes low-resolution versions of the first four letters of the alphabet. The loop is made of 96 simple commands. The agreement with computer simulations is essentially perfect, as we demonstrate in a one-to-one comparison in Supplementary Movie 4.
The simultaneous control of the transport in several patches of rotated square patterns is particularly simple due to the simplicity of the fences in \({{{{{{{\mathcal{C}}}}}}}}\). However, the same ideas apply to patterns with other symmetry classes.
Here, we have initialized the particles in the desired positions within their respective patches. As we discuss now, it is possible to automatize this process by combining the patches with complex patterns.
Complex patterns and complex loops
Complete control over the colloidal transport is achieved by combining complex patterns and complex loops. In Fig. 6 we combine three C4 patches that differ in their global orientation ψ and three hexagonal patterns with a topological defect in the symmetry phase. The transition between both patterns occurs smoothly within a region of length equivalent to approximately five unit cells of the square patterns.
We first make use of the patterns with a topological defect to move randomly placed particles toward the defects. We simply repeat the attractor modulation loop shown in Fig. 2 several times such that the particles move and stay at the defects, see the blue trajectories of the particles in Fig. 6. Once this initialization stage is finished we know the precise position of the particles and can control them independently. Using two simple loops we transport the particles downwards from the defects to the square patches. We use one loop to move the particles in the defect pattern (orange trajectories) and another loop to move the particles in the transition region and the square patches (green trajectories). Then, a relatively complex loop controls the motion of the three particles independently. Each particle follows a complex trajectory drawing either a square, a triangle, or a cross depending on the value of the global orientation ψ (red trajectories). Experimentally we tested each part of the loop separately, as shown in the insets of Fig. 6. Again, the agreement between simulations and experiments is excellent. The small errors that occur in the experimental trajectories, likely due to imperfections in the pattern, do not affect the global shape of the trajectories. A movie of the whole process is shown in Supplementary Movie 5.
Discussion
We have shown that the combination of a complex static magnetic field with a simple time-dependent uniform external field of varying orientation allows us to control the motion of several identical microparticles independently and simultaneously. The transport complexity can be broken down to a finite set of special orientations of the external field. A modulation loop that winds around one of those orientations induces transport along a known direction in a known region of the pattern. The motion is topologically protected since only the winding numbers of the modulation loop around the special orientations (topological invariant) are important. Hence, it is relatively simple to generate loops and patterns that induce arbitrarily complex trajectories. Our ideas might be transferable to other systems in which the transport is also based on topological protection. These include, solitons45, nano-machines46,47, sound waves48,49, photons50,51, and quantum mechanical excitations52.
The complexity of the transport is encoded in the magnetic potential which varies in space and in time via the magnetic patterns and the modulation loops, respectively. An alternative approach that encodes the transport in the particle shape has appeared recently53. There, Sobolev et al. find the shape of the rigid body that traces the desired trajectory when rolling down a slope. We have restricted our study to identical isotropic paramagnetic particles. However, as discussed in the “Introduction” section, colloidal particles with different characteristics (e.g. diamagnetic and paramagnetic particles or particles with different shapes) might belong to different topological classes. The fences of particles belonging to different topological classes are located in different regions in \({{{{{{{\mathcal{C}}}}}}}}\). Above non-periodic patterns, the control space of particles belonging to different topological classes will also depend on the space coordinate. A precise control over the transport depending not only on the position but also on the particle characteristics is then possible. Therefore, beyond offering the possibility to control the transport of identical microparticles simultaneously, our work also opens a new route towards dynamical self-assembly in colloidal science. As an example, we have created a colloidal rod factory54 in which identical isotropic particles are transported toward a reaction site in which they self-assemble. Only when they reach the desired aspect ratio, do the rods leave the polymerization site following the desired trajectory. The use of patchy colloids55,56,57,58 with, e.g. hybridization of complementary DNA strands59,60,61 and other shape-anisotropic particles62,63 would offer more versatility to create complex functional structures.
We have considered transport above patterns made of identical patches rotated with respect to each other. It is also possible to combine patches of patterns with different symmetries provided that their respective fences do not overlap in control space. Moreover, a combination of both, i.e. a pattern made of patches with different symmetries, e.g. C4 and C6, that in addition are rotated with respect to each other would substantially increase the number of tasks that can be done simultaneously since their respective fences in control space do not overlap.
In the experiments, the Brownian motion of the colloidal particles is negligible but it might play a role in other systems with smaller colloids and/or at higher temperatures. Since the transport is topologically protected, it is robust against perturbations such as the presence of Brownian motion44. If we make Brownian motion more prominent (e.g. by increasing the temperature or reducing the particle size) the particles start to deviate from the expected trajectories but overall the transport is robust. An example of Brownian dynamics simulations at different temperatures is shown in Supplementary Fig. 4. The topological protection will disappear due to Brownian motion at sufficiently high temperatures and for small enough particles. A possible solution would then be to increase the magnitude of either the pattern field or the external magnetic field such that the magnetic forces dominate again the transport.
Our systems are very dilute and therefore direct interparticle interactions and hydrodynamic interactions do not play any role. However, it would be interesting to look at the effect of both superadiabatic forces64 and long-range hydrodynamic interactions65 in denser systems.
Methods
System setup and computer simulations
Identical paramagnetic colloidal particles immersed in a solvent are located above a magnetic pattern and are restricted to move in a plane parallel to the pattern (xy-plane), which we call action space \({{{{{{{\mathcal{A}}}}}}}}\) (Fig. 1a). The pattern contains regions of positive, \(+{m}_{{}_{{{{{{{{\rm{p}}}}}}}}}}\), and negative, \(-{m}_{{}_{{{{{{{{\rm{p}}}}}}}}}}\), uniform magnetization along the z-direction (normal to the pattern). The width of the domain walls between oppositely magnetized regions is negligible. The particles are driven by a time- and space-dependent external magnetic potential \({V}_{{{{{{{{{\rm{mag}}}}}}}}}}({{{{{{{{\bf{r}}}}}}}}}_{{{{{{{{\mathcal{A}}}}}}}}},t)\). The potential is generated by the static but space-dependent magnetic field of the pattern \({{{{{{{{\bf{H}}}}}}}}}_{{{{{{{{\rm{p}}}}}}}}}({{{{{{{{\bf{r}}}}}}}}}_{{{{{{{{\mathcal{A}}}}}}}}})\) and a time-dependent but spatially homogeneous external magnetic field Hext(t). Here \({{{{{{{{\bf{r}}}}}}}}}_{{{{{{{{\mathcal{A}}}}}}}}}\) is the space coordinate in action space and t denotes the time. The magnitude of the external field (constant) is much larger than that of the pattern field, i.e. \({H}_{{{{{{{{{\rm{ext}}}}}}}}}}\,\gg \,{H}_{{{{{{{{{\rm{p}}}}}}}}}}({{{{{{{{\bf{r}}}}}}}}}_{{{{{{{{\mathcal{A}}}}}}}}})\) for any position in \({{{{{{{\mathcal{A}}}}}}}}\). Hence, the magnetic potential, which is proportional to the square of the total magnetic field \({V}_{{{{{{{{{\rm{mag}}}}}}}}}}\propto -({{{{{{{{\bf{H}}}}}}}}}_{{{{{{{{\rm{ext}}}}}}}}}+{{{{{{{{\bf{H}}}}}}}}}_{{{{{{{{\rm{p}}}}}}}}})\cdot ({{{{{{{{\bf{H}}}}}}}}}_{{{{{{{{\rm{ext}}}}}}}}}+{{{{{{{{\bf{H}}}}}}}}}_{{{{{{{{\rm{p}}}}}}}}})\), is dominated by the coupling between the external and the pattern fields:
Here μ0 is the vacuum permeability, χ is the magnetic susceptibility of the colloidal particle, and v0 is the particle volume37. We have omitted the term proportional to Hext ⋅ Hext in \({V}_{{}_{{{{{{{{\rm{mag}}}}}}}}}}\) since it is just a constant and therefore it does not affect the motion.
In the overdamped limit, the equation of motion of one particle reads
where γ is the friction coefficient against the implicit solvent, the overdot denotes time derivative, \({\nabla }_{{{{{{{{\mathcal{A}}}}}}}}}\) is the derivative with respect to \({{{{{{{{\bf{r}}}}}}}}}_{{{{{{{{\mathcal{A}}}}}}}}}\), and η is a delta-correlated Gaussian random force with zero mean that models the effect of the collisions between the molecules of the solvent and the colloidal particle (Brownian motion). We define our energy scale ε as the absolute value of the average external energy that a particle would have when the external magnetic field points normal to the pattern. Hence, absolute temperature T is given in reduced units kBT/ε where kB is the Boltzmann’s constant. We use the magnitude of a lattice vector of the periodic pattern a as the length scale. The timescale is hence given by τ = γa2/ε. We use adaptive Brownian dynamics66 to efficiently integrate the equation of motion. In the experiments, the magnetic forces strongly dominate over the random forces. Hence, random forces do not play any role. We use Brownian dynamics simulations due to the overdamped character of the motion in the viscous aqueous solvent. The code to simulate the colloidal motion and to generate the modulation loops is available via Zenodo67.
As the external magnetic field is homogeneous in space, it can be solely described by its orientation. The set of all possible orientations of Hext forms a spherical surface that we call control space \({{{{{{{\mathcal{C}}}}}}}}\). A point in \({{{{{{{\mathcal{C}}}}}}}}\) indicates an orientation of Hext. We drive the colloidal motion by performing closed loops of the orientation of Hext in \({{{{{{{\mathcal{C}}}}}}}}\). Loops that wind around specific points in \({{{{{{{\mathcal{C}}}}}}}}\) induce colloidal motion. That is, once the loop returns to its initial position, the colloidal particle has moved to a different unit cell of the pattern. The transport is topologically protected since the precise form of the loop is irrelevant. Only the winding numbers of the loop around the specific points in \({{{{{{{\mathcal{C}}}}}}}}\) (which are the topological invariants) determine the transport.
Experiments
The magnetic films with the desired patterns imprinted are thin Co/Au multilayers with perpendicular magnetic anisotropy68 lithographically patterned via a home-built69 keV-He-ion bombardment70. Further details about the fabrication process can be found in refs. 37,71,72,73. The patterns have lattice vectors of magnitude 14 μm if not stated otherwise.
To reduce the influence of lateral magnetic field fluctuations due to the fabrication procedure (which increases near the substrate) we coat the magnetic pattern with a photo-resist film (thickness 1.6 μm). The coating layer serves other two purposes: it protects the patterns and it acts as a spacer between the colloidal particles and the pattern (see Fig. 1), in order to secure the condition ∣Hext∣ ≫ ∣Hp∣. We then place paramagnetic colloids of diameter 2.8 μm immersed in deionized water on top of the pattern. The microparticles sediment and are suspended roughly the Debye length above the negatively charged coating layer on the pattern. The motion above the pattern is effectively two-dimensional.
The uniform external magnetic field is generated with three coils arranged around the pattern and controlled with a computer. The magnitude of the external field is approximately 4 × 103 A/m. Standard reflection microscopy techniques are used to visualize both the colloids and the pattern.
Square and hexagonal periodic patterns
Consider magnetic periodic N-fold symmetric patterns with either N = 2 (square patterns) or N = 3 (hexagonal patterns). Examples of both types are shown in Supplementary Fig. 1. In the limit of an infinitely thin pattern located at z = 0, the magnetization is
with δ(⋅) the Dirac distribution, \({\hat{{{{{{{{\bf{e}}}}}}}}}}_{z}\) the unit vector normal to the pattern, r⊥ = (x, y), and
where mp is the saturation magnetization of the domains. The wave vectors qi in the square patterns are
with magnitude q0 = 2π/a and a being the magnitude of a lattice vector, which in square patterns can be defined with the wave vectors being the reciprocal lattice vectors. That is, ai ⋅ qj = 2πδij (see Supplementary Fig. 1b). The global phase ψ sets the orientation of the lattice vectors with respect to a fixed laboratory frame.
In the hexagonal patterns, the wave vectors are
with magnitude \({q}_{0}=4\pi /(a\sqrt{3})\). Here, the three wave vectors can be related to three (linearly dependent) lattice vectors via qi ⋅ aj = 2πδij for i = 1, 2 and a3 ⋅ q3 = 0 (see Supplementary Fig. 1b).
In both square and hexagonal patterns, the wave vectors point into the N different symmetry directions. The translational vector b in Eq. (4) plays a relevant role only in inhomogeneous patterns. In periodic patterns, we usually set b = 0.
In square patterns, the symmetry phase ϕ in the magnetization (see Eq. (4)), simply causes a trivial shift of all Wigner–Seitz cells with respect to the origin of the pattern. Hence, for simplicity, we set it to zero. In hexagonal patterns however, the symmetry phase ϕ has a non-trivial effect since it determines the point symmetry of the pattern (see Supplementary Fig. 1c), and therefore the modulation loops required to transport the colloidal particles37. The Wigner–Seitz cell of a hexagonal pattern contains in general three symmetry points with C3 symmetry (rotation through an angle 2π/3 about the symmetry axis). For special values of the symmetry phase, one of the three-fold symmetric points acquires a higher symmetry; either six-fold hexagonal C6 symmetry (for ϕ = 0 and ϕ = ± π/3) or S6 symmetry, i.e. a C6 followed by a perpendicular reflection (for ϕ = ± π/6).
Finally, the parameter m0 in Eq. (4), which is actually a function of the symmetry phase ϕ, alters the area ratio between up-magnetized and down-magnetized domains. Following Loehr et al.37, we use here \({m}_{0}(\phi )=\frac{1}{2}\cos (3\phi ){\delta }_{N,3}\) (therefore in square patterns m0 = 0) to ensure that the average magnetization in hexagonal patterns is very small, i.e.
Magnetic field of the pattern
To numerically compute the magnetic field of the pattern, Hp(r), at the desired position in action space we first discretize the pattern in a square grid with resolution 0.03a and compute the magnetization at the grid points via Eq. (4). Next, we compute the magnetic field at the grid points by convolution of the magnetization with the Green’s-function of the system:
Here r⊥ = (x, y) is the position coordinate in a plane parallel to the pattern. We calculate the magnetic field at an elevation above the pattern z = 0.5a, which is comparable to the experimental value. As usual, we perform the convolution in Fourier space.
To calculate the magnetic field at a generic, off-grid, position we simply interpolate the magnetic field using bicubic splines.
Pattern with a topological defect
For the pattern with a topological defect shown in Fig. 2, the symmetry phase varies with the position r⊥ as
and the global orientational phase is set to ψ = 0 in Eq. (6). For our choice of wave vectors (see Eq. (6) and Supplementary Fig. 1b), the symmetry phase modulation is simply \(\phi ({{{{{{{{\bf{r}}}}}}}}}_{\perp })=\left(\pi /2-\arctan (x,y)\right)/3\). Here \(\arctan (y,x)\) returns the four-quadrant inverse tangent of y/x. The symmetry phase varies therefore between ϕ = −π/3 and π/3 as we wind once around the origin. The topological charge of the defect located at the center of the pattern (r⊥ = 0) is q = Δϕ/(2π/p) = 1. Here Δϕ = 2π/3 is the angle that the director rotates if we wind once counter-clockwise around the defect, and p = 3 is the p-atic symmetry of the director field74. (The symmetry phase can be described with a 3-atic director field for which the local orientations are defined modulo π/3.) Varying the symmetry phase between −π/3 and π/3 also introduces a shift of the unit cell, cf. the unit cells for ϕ = π/3 and −π/3 in Supplementary Fig. 1c. To rectify this shift and avoid therefore discontinuities in the magnetization of the pattern, we need to use a local shift vector in Eq. (4) given by
The shift vector can be understood as a Burgers vector since it corrects for the spatial distortion of the pattern around the defect.
Symmetry phase modulated patterns
To encode in the pattern the desired particle trajectories, we use the drawing software Krita75. We prescribe the stable trajectory on a square image with a side-length of 1000 pixels. In Krita, we draw the desired trajectory with a brush (thickness 1 pixel) that encodes the drawing direction in the hue of the colored pixels. The drawing direction directly translates into the transport direction that the particles will follow above the pattern. This procedure results in an image that is essentially empty except for the trajectory lines. We then map from hue to the symmetry phase ϕ. An example of the pattern at this stage is shown in Supplementary Fig. 3a. The mapping from hue to ϕ is simply a linear transformation.
Next, we give a value to the symmetry phase everywhere in the pattern. To calculate the phase at a generic position r⊥ = (x, y) we average over all the prescribed phases along the trajectories. Each phase along the trajectory is weighted with a weight function proportional to \(1/{r}_{{\rm {d}}}^{2}\), with rd the distance between r⊥ and a point on the trajectory. Special care needs to be taken due to the periodicity of the symmetry phase76. We first transform the phases along the trajectories into unit vectors, next we average the vectors, and then transform back the averaged vector into a value of the symmetry phase. An illustration of the pattern after this stage is shown in Supplementary Fig. 3b. Finally, we use the value of the symmetry phase in the whole pattern to calculate the magnetization via Eq. (4) (see Supplementary Fig. 3c).
Data availability
The code to simulate the system and to generate the modulation loops is available at Zenodo67. All other data supporting the findings are available from the corresponding author upon request.
Code availability
A code to perform the adaptive Brownian Dynamics simulations of the colloidal particles as well as to generate the modulation loops is available at Zenodo67.
References
Royall, C. P., Dzubiella, J., Schmidt, M. & van Blaaderen, A. Nonequilibrium sedimentation of colloids on the particle scale. Phys. Rev. Lett. 98, 188304 (2007).
Yang, L. & Alexandridis, P. Physicochemical aspects of drug delivery and release from polymer-based colloids. Curr. Opin. Colloid Interface Sci. 5, 132–143 (2000).
Boyd, B. J. Past and future evolution in colloidal drug delivery systems. Expert Opin. Drug Deliv. 5, 69–85 (2007).
Beija, M., Salvayre, R., de Viguerie, N. L. & Marty, J.-D. Colloidal systems for drug delivery: from design to therapy. Trends Biotechnol. 30, 485–496 (2012).
McGorty, R., Fung, J., Kaz, D. & Manoharan, V. N. Colloidal self-assembly at an interface. Mater. Today 13, 34–42 (2010).
Mallory, S. A., Valeriani, C. & Cacciuto, A. An active approach to colloidal self-assembly. Annu. Rev. Phys. Chem. 69, 59–79 (2018).
Dijkstra, M. & Luijten, E. From predictive modelling to machine learning and reverse engineering of colloidal self-assembly. Nat. Mater. 20, 762–773 (2021).
Terray, A., Oakey, J. & Marr, D. W. M. Microfluidic control using colloidal devices. Science 296, 1841–1844 (2002).
Holzinger, D., Lengemann, D., Göllner, F., Engel, D. & Ehresmann, A. Controlled movement of superparamagnetic bead rows for microfluid mixing. Appl. Phys. Lett. 100, 153504 (2012).
Lim, B. et al. Magnetophoretic circuits for digital control of single particles and cells. Nat. Commun. 5, 3846 (2014).
Wang, L. & Wang, J. Self-assembly of colloids based on microfluidics. Nanoscale 11, 16708–16722 (2019).
Shin, S. Diffusiophoretic separation of colloids in microfluidic flows. Phys. Fluids 32, 101302 (2020).
Abedini-Nassab, R., Sadeghidelouei, N. & Shields IV, C. W. Magnetophoretic circuits: a review of device designs and implementation for precise single-cell manipulation. Anal. Chim. Acta 1272, 341425 (2023).
Koumakis, N., Maggi, C. & Leonardo, R. D. Directed transport of active particles over asymmetric energy barriers. Soft Matter 10, 5695–5701 (2014).
Schakenraad, K. et al. Topotaxis of active Brownian particles. Phys. Rev. E 101, 032602 (2020).
Martinez, R., Alarcon, F., Aragones, J. L. & Valeriani, C. Trapping flocking particles with asymmetric obstacles. Soft Matter 16, 4739–4745 (2020).
Löwen, H. Colloidal soft matter under external control. J. Phys.: Condens. Matter 13, R415–R432 (2001).
Erbe, A., Zientara, M., Baraban, L., Kreidler, C. & Leiderer, P. Various driving mechanisms for generating motion of colloidal particles. J. Phys.: Condens. Matter 20, 404215 (2008).
Reichhardt, C. & Reichhardt, C. J. O. Depinning and nonequilibrium dynamic phases of particle assemblies driven over random and ordered substrates: a review. Rep. Prog. Phys. 80, 026501 (2016).
Köppl, M., Henseler, P., Erbe, A., Nielaba, P. & Leiderer, P. Layer reduction in driven 2D-colloidal systems through microchannels. Phys. Rev. Lett. 97, 208302 (2006).
Vissers, T. et al. Lane formation in driven mixtures of oppositely charged colloids. Soft Matter 7, 2352–2356 (2011).
Li, P., Kilinc, D., Ran, Y.-F. & Lee, G. U. Flow enhanced non-linear magnetophoretic separation of beads based on magnetic susceptibility. Lab Chip 13, 4400–4408 (2013).
Holzinger, D., Koch, I., Burgard, S. & Ehresmann, A. Directed magnetic particle transport above artificial magnetic domains due to dynamic magnetic potential energy landscape transformation. ACS Nano 9, 7323–7331 (2015).
Tierno, P., Golestanian, R., Pagonabarraga, I. & Sagués, F. Controlled swimming in confined fluids of magnetically actuated colloidal rotors. Phys. Rev. Lett. 101, 218304 (2008).
Ashkin, A., Dziedzic, J. M., Bjorkholm, J. E. & Chu, S. Observation of a single-beam gradient force optical trap for dielectric particles. Opt. Lett. 11, 288–290 (1986).
Magnasco, M. O. Forced thermal ratchets. Phys. Rev. Lett. 71, 1477–1481 (1993).
Faucheux, L. P., Bourdieu, L. S., Kaplan, P. D. & Libchaber, A. J. Optical thermal ratchet. Phys. Rev. Lett. 74, 1504–1507 (1995).
Hänggi, P. & Marchesoni, F. Artificial Brownian motors: controlling transport on the nanoscale. Rev. Mod. Phys. 81, 387–442 (2009).
Matthias, S. & Müller, F. Asymmetric pores in a silicon membrane acting as massively parallel Brownian ratchets. Nature 424, 53–57 (2003).
Lee, S.-H., Ladavac, K., Polin, M. & Grier, D. G. Observation of flux reversal in a symmetric optical thermal ratchet. Phys. Rev. Lett. 94, 110601 (2005).
Skaug, M. J., Schwemmer, C., Fringes, S., Rawlings, C. D. & Knoll, A. W. Nanofluidic rocking Brownian motors. Science 359, 1505–1508 (2018).
Anderluh, A., Hemmelmayr, V. C. & Nolz, P. C. Synchronizing vans and cargo bikes in a city distribution network. Cent. Eur. J. Oper. Res. 25, 345–376 (2016).
Korda, P. T., Taylor, M. B. & Grier, D. G. Kinetically locked-in colloidal transport in an array of optical tweezers. Phys. Rev. Lett. 89, 128301 (2002).
MacDonald, M. P., Spalding, G. C. & Dholakia, K. Microfluidic sorting in an optical lattice. Nature 426, 421–424 (2003).
Ladavac, K., Kasza, K. & Grier, D. G. Sorting mesoscopic objects with periodic potential landscapes: optical fractionation. Phys. Rev. E 70, 010901 (2004).
Lacasta, A. M., Sancho, J. M., Romero, A. H. & Lindenberg, K. Sorting on periodic surfaces. Phys. Rev. Lett. 94, 160601 (2005).
Loehr, J. et al. Lattice symmetries and the topologically protected transport of colloidal particles. Soft Matter 13, 5044–5075 (2017).
Mirzaee-Kakhki, M. et al. Simultaneous polydirectional transport of colloidal bipeds. Nat. Commun. 11, 4670 (2020).
Loehr, J., Loenne, M., Ernst, A., de las Heras, D. & Fischer, T. M. Topological protection of multiparticle dissipative transport. Nat. Commun. 7, 11745 (2016).
Phillips, C. L. et al. Digital colloids: reconfigurable clusters as high information density elements. Soft Matter 10, 7468–7479 (2014).
Chakraborty, I. et al. Self-assembly dynamics of reconfigurable colloidal molecules. ACS Nano 16, 2471–2480 (2022).
Solomon, M. J. Tools and functions of reconfigurable colloidal assembly. Langmuir 34, 11205–11219 (2018).
Hendley, R. S., Zhang, L. & Bevan, M. A. Multistate dynamic pathways for anisotropic colloidal assembly and reconfiguration. ACS Nano 17, 20512–20524 (2023).
de las Heras, D., Loehr, J., Loenne, M. & Fischer, T. M. Topologically protected colloidal transport above a square magnetic lattice. New. J. Phys. 18, 105009 (2016).
ge Chen, B. G., Upadhyaya, N. & Vitelli, V. Nonlinear conduction via solitons in a topological mechanical insulator. Proc. Natl. Acad. Sci. USA 111, 13004–13009 (2014).
Porto, M., Urbakh, M. & Klafter, J. Atomic scale engines: cars and wheels. Phys. Rev. Lett. 84, 6058–6061 (2000).
Popov, V. L. Nanomachines: methods to induce a directed motion at nanoscale. Phys. Rev. E 68, 026608 (2003).
Nash, L. M. et al. Topological mechanics of gyroscopic metamaterials. Proc. Natl. Acad. Sci. USA 112, 14495–14500 (2015).
Yang, Z. et al. Topological acoustics. Phys. Rev. Lett. 114, 114301 (2015).
Mittal, S. et al. Topologically robust transport of photons in a synthetic gauge field. Phys. Rev. Lett. 113, 087403 (2014).
Ningyuan, J., Owens, C., Sommer, A., Schuster, D. & Simon, J. Time- and site-resolved dynamics in a topological circuit. Phys. Rev. X 5, 021031 (2015).
Hasan, M. Z. & Kane, C. L. Colloquium: topological insulators. Rev. Mod. Phys. 82, 3045–3067 (2010).
Sobolev, Y. I. et al. Solid-body trajectoids shaped to roll along desired pathways. Nature 620, 310–315 (2023).
Elschner, J. et al. Topologically controlled synthesis of active colloidal bipeds (2023) (in preparation).
Michele, C. D., Gabrielli, S., Tartaglia, P. & Sciortino, F. Dynamics in the presence of attractive patchy interactions. J. Phys. Chem. B 110, 8064–8079 (2006).
Bianchi, E., Blaak, R. & Likos, C. N. Patchy colloids: state of the art and perspectives. Phys. Chem. Chem. Phys. 13, 6397–6410 (2011).
Yi, G.-R., Pine, D. J. & Sacanna, S. Recent progress on patchy colloids and their self-assembly. J. Phys.: Condens. Matter 25, 193101 (2013).
Kim, Y.-J., Moon, J.-B., Hwang, H., Kim, Y. S. & Yi, G.-R. Advances in colloidal building blocks: toward patchy colloidal clusters. Adv. Mater. 35, 2203045 (2022).
Geerts, N. & Eiser, E. DNA-functionalized colloids: physical properties and applications. Soft Matter 6, 4647–4660 (2010).
Michele, L. D. et al. Multistep kinetic self-assembly of DNA-coated colloids. Nat. Commun. 4, 2007 (2013).
Shelke, Y. et al. Flexible colloidal molecules with directional bonds and controlled flexibility. ACS Nano 17, 12234–12246 (2023).
Hernandez, C. J. & Mason, T. G. Colloidal alphabet soup: monodisperse dispersions of shape-designed LithoParticles. J. Phys. Chem. C 111, 4477–4480 (2007).
Sacanna, S., Pine, D. J. & Yi, G.-R. Engineering shape: the novel geometries of colloidal self-assembly. Soft Matter 9, 8096–8106 (2013).
de las Heras, D., Zimmermann, T., Sammüller, F., Hermann, S. & Schmidt, M. Perspective: how to overcome dynamical density functional theory. J. Phys.: Condens. Matter 35, 271501 (2023).
Leyva, S. G., Stoop, R. L., Pagonabarraga, I. & Tierno, P. Hydrodynamic synchronization and clustering in ratcheting colloidal matter. Sci. Adv. 8, eabo4546 (2022).
Sammüller, F. & Schmidt, M. Adaptive Brownian dynamics. J. Chem. Phys. 155, 134107 (2021).
Stuhlmüller, N. C. X. Drawing with colloids. Zenodo https://doi.org/10.5281/zenodo.8413928 (2023).
Kuświk, P. et al. Colloidal domain lithography in multilayers with perpendicular anisotropy: an experimental study and micromagnetic simulations. Nanotechnology 23, 475303 (2012).
Lengemann, D., Engel, D. & Ehresmann, A. Plasma ion source for in situ ion bombardment in a soft x-ray magnetic scattering diffractometer. Rev. Sci. Instrum. 83, 053303 (2012).
Chappert, C. et al. Planar patterned magnetic media obtained by ion irradiation. Science 280, 1919–1922 (1998).
Urbaniak, M. et al. Domain-wall movement control in Co/Au multilayers by he+-ion-bombardment-induced lateral coercivity gradients. Phys. Rev. Lett. 105, 067202 (2010).
Kuświk, P. et al. Colloidal domain lithography for regularly arranged artificial magnetic out-of-plane monodomains in Au/Co/Au layers. Nanotechnology 22, 095302 (2011).
Jarosz, A., Holzinger, D., Urbaniak, M., Ehresmann, A. & Stobiecki, F. Manipulation of superparamagnetic beads on patterned Au/Co/Au multilayers with perpendicular magnetic anisotropy. J. Appl. Phys. 120, 084506 (2016).
Bowick, M. J. & Giomi, L. Two-dimensional matter: order, curvature and defects. Adv. Phys. 58, 449–563 (2009).
Krita (Krita foundation, accessed June 2023) https://krita.org/.
Olson, E. On computing the average orientation of vectors and lines. In 2011 IEEE International Conference on Robotics and Automation, 3869–3874 (IEEE, Shanghai, China, 2011). https://doi.org/10.1109/ICRA.2011.5979562.
Acknowledgements
We thank Adrian Ernst for helping us to transfer the loops from the simulations to the experiment. We acknowledge funding by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) under project numbers 440764520 (T.M.F. and D.d.l.H.) and 531559581 (D.d.l.H. and T.M.F.).
Funding
Open Access funding enabled and organized by Projekt DEAL.
Author information
Authors and Affiliations
Contributions
N.C.X.S. designed the modulation loops and performed the computer simulations. F.F. performed the experiments. N.C.X.S., F.F., T.M.F., and D.d.l.H. conceptualized the research. P.K., F.S., and M.U. produced the magnetic film. S.A. and Ar.E. performed the fabrication of the micromagnetic domain patterns within the magnetic thin film. N.C.X.S., T.M.F., and D.d.l.H. designed the patterns and wrote the manuscript. All authors contributed to the different revision stages of the manuscript.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Peer review
Peer review information
Nature Communications thanks Pietro Tierno and the other anonymous reviewer(s) for their contribution to the peer review of this work. A peer review file is available.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Stuhlmüller, N.C.X., Farrokhzad, F., Kuświk, P. et al. Simultaneous and independent topological control of identical microparticles in non-periodic energy landscapes. Nat Commun 14, 7517 (2023). https://doi.org/10.1038/s41467-023-43390-0
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-023-43390-0
- Springer Nature Limited