Abstract
Active fluids, like all other fluids, exert mechanical pressure on confining walls. Unlike equilibrium, this pressure is generally not a function of the fluid state in the bulk and displays some peculiar properties. For example, when activity is not uniform, fluid regions with different activity may exert different pressures on the container walls but they can coexist side by side in mechanical equilibrium. Here we show that by spatially modulating bacterial motility with light, we can generate active pressure gradients capable of transporting passive probe particles in controlled directions. Although bacteria swim faster in the brighter side, we find that bacteria in the dark side apply a stronger pressure resulting in a net drift motion that points away from the low activity region. Using a combination of experiments and numerical simulations, we show that this drift originates mainly from an interaction pressure term that builds up due to the compression exerted by a layer of polarized cells surrounding the slow region. In addition to providing new insights into the generalization of pressure for interacting systems with non-uniform activity, our results demonstrate the possibility of exploiting active pressure for the controlled transport of microscopic objects.
Similar content being viewed by others
Introduction
An ideal gas of non interacting self-propelled particles moving in an inertialess microenvironment, will exert a reaction force over a confining boundary that must push on them to overcome self-propulsion and avoid crossing1. This resulting “swim pressure” will depend on the number of particles pushing on a unit surface times the mean force applied by them. The surface density of this layer of polarized particles can be estimated by a simple scaling argument2 that imposes a balance between the rate of particles colliding with a unit surface ~ρv and the rate of particles leaving the surface ~σ/τ where ρ is the bulk number density, v is the self-propulsion speed, σ the surface density and τ the average interaction time between particle and surface. By equating the two rates we get σ ~ ρvτ that, when multiplied by the “swim force”3 f ~ γv (with γ the viscous friction on the particle), finally gives for the pressure P ~ γρv2τ. A more rigorous treatment shows that the previous expression provides an equation of state for the “swim pressure” of spherical particles (no torque interactions) with τ the inverse tumbling rate α1,4,5,6. When repulsive interactions are introduced, the motions of the particles are slowed down by their neighbors, causing a reduction in the “swim pressure”7. At the same time, a second pressure term appears, which is the ordinary interaction pressure of passive systems1,7,8 and that becomes predominant at high densities. Again, if particle reorient freely, the total pressure on the boundary can be expressed by an equation of state depending solely on bulk fluid properties7. These results have been discussed mainly in simulations but only in few experiments with Janus particles confined by acoustic traps or gravity9,10. When active particles are reoriented by walls their mechanical action on confining walls cannot be deduced any longer from a state function depending solely on bulk properties4,11, as also verified experimentally in granular active systems12. Even in those simpler cases when active pressure is a state function, some apparently odd mechanical properties emerge when activity is not spatially homogeneous. In passive fluids, the mechanical equilibrium condition requires that, in the presence of a non-homogeneous temperature, a modulation of density is generated to restore uniform pressure throughout the fluid. For a low density active fluid, instead, when the swimming speed varies in space, the stationary density satisfies \(\rho v\simeq {{{{{{{\rm{const}}}}}}}}\)13,14,15 resulting in a non uniform pressure P ∝ v4. Thus regions with different activities coexist side by side in mechanical equilibrium as long as the product ρv is constant. Although in equilibrium with each other in the bulk, regions with different activities exert different pressures on the walls with the faster region pushing harder4. This remains true even when repulsive interactions between active particles are introduced, although the pressure difference on the two sides can be significantly reduced by the direct pressure term on the slow, more concentrated region16.
Here we show that a stationary active fluid with a space-dependent activity conceals pressure gradients that become manifest when an external object is immersed in the fluid and experiences unbalanced pressures on its surface. By using Escherichia coli cells genetically engineered to swim with a light controllable speed14,17,18 we continuously keep a spherical probe in between a high- and a low-speed regions by projecting dynamic light patterns that follow the probe movements. At high enough densities of bacteria, we find that the probes are pushed stronger by the low-activity side, in contrast to what expected from previous simulations where a higher pressure was found on the wall facing faster bacteria7,16. Although the transport of asymmetrical objects in homogeneous bacterial baths has already been demonstrated19,20,21,22,23, here we show that the requirement of spatial symmetry breaking, which is necessary for rectification, can be transferred from the object to the fluid, enabling the active transport of passive objects with arbitrary shapes. Using a combination of experiments and numerical simulations, we show that the higher pressure pushing the probe from the low activity side is indeed a passive interaction pressure originating from the compression produced on the slow region by a surrounding layer of polarized cells.
Results
Observation of colloidal drift in light-induced activity gradients
Our active fluid consists of a suspension of E. coli bacteria expressing the light driven proton pump proteorhodopsin. In the absence of oxygen, aerobic respiration is blocked and proteorhodopsin can be used to control the proton motive force that drives flagellar motors, so that the bacteria’s speed becomes a function of local green light intensity17. The response of our strain to green light intensity is reported in Supplementary Fig. 1. Using a digital light projector coupled to the microscope objective, we can shape the speed of bacteria with a spatial resolution that matches that of the imaging system14,24. A space-dependent speed gives rise to a density modulation that, in the steady-state, accumulates bacteria in low-speed regions and depletes them from high-speed regions. Static modulations have been used to shape bacterial density with light14,18. Dynamic modulations instead can be used to generate steady fluxes of bacteria25,26 or to trap dense and active clouds of bacteria using an optical feedback loop24. Here we are interested in the mechanical effects of a space modulated activity on suspended passive objects. For simplicity we choose spherical probe particles (polystyrene 5 μm radius) so that any observed rectification must be attributed to a broken spatial symmetry in the bacterial bath. In a series of preliminary experiments, we produced smooth speed gradients on length scales larger than the particle size, but no significant drift was observed, Supplementary Fig. 2. Therefore we decided to expose the particle to a steep activity modulation that is found at the interface between a low speed region (light intensity I− and corresponding mean bacterial speed v−) and a high speed region (I+, v+), Fig. 1a. We project this binary pattern within circular regions of radius R whose centers are continuously updated to follow the position of the probe particles. Outside these modulation disks we set a uniform background of intensity I0 corresponding to a mean speed v0. In this way we can record multiple independent particle trajectories in the same field of view. We image the system in dark field mode so that bacteria appear as white spots over a dark background while the colloidal probes stand out in the image as white saturated circles, Fig. 1b. When modulation circles are projected, bacteria start accumulating in the low speed side producing a brighter half disc on the left side of the probes. This transient dynamics lasts for a few seconds (see Supplementary Fig. 3) during which the probe settles into a final systematic drift to the right. Particle trajectories spanning a total time of 5 min are superimposed in green over the last image frame in Fig. 1b, c (See Supplementary Movie 1). The drift direction is reversed when we switch high- and low-speed regions within the modulation circles. We measured drift speeds of V ≈ 10 μm/min, with light intensities of I+ = 0.9 mW/mm2, I− = 0.1 mW/mm2 and I0 = 0.7 mW/mm2 (v+ = 19 μm/s, v− = 7 μm/s, v0 = 17 μm/s), in a modulation circle of radius R = 40 μm. This drift is about 1% of bacteria speed in the fast side. Contrary to our expectations, however, the movement of the microspheres is directed towards the high-speed side, as if the pressure exerted by the slow bacteria was greater than that of the fast ones. As discussed in the “Introduction”, previous simulation work found a higher “swim pressure” coming from the more active right side, which could be only partially counterbalanced by a direct interaction pressure term if the slow side becomes sufficiently concentrated16.
To get some clues on the physical origin of this drift, we first analyze its dependence on the bulk bacterial concentration. As shown in Fig. 2c, a significant drift is only found for optical density (OD) values above 4 with a best fit line going to zero for a finite OD. This observation suggests that interactions between bacteria play an important role and drift is not simply proportional to density as in the case of non interacting cells. This finding is also confirmed by bacterial dynamics simulations shown in Fig. 2, see also Supplementary Movie 2. Steric interactions between bacteria can be easily turned off in simulations resulting in a strong suppression of drift (that anyways maintains a positive sign). On the other hand, when we consider steric interactions between swimmers, we find a good quantitative agreement with the experimental data Fig. 2c. Although interactions can also be hydrodynamic in principle, we believe that these play a minor role in our experiments and therefore we do not explicitly consider fluid in our simulations. In fact, hydrodynamic interactions in a force-free system occur only through dipole or higher order multipoles, becoming effective only over short distances where steric interactions are the predominant mechanism for alignment27. Finally, in these experiments bacteria are either highly motile and low concentrated or highly concentrated and non-motile, another reason to justify neglecting of hydrodynamic interactions.
Shaping active pressure with light
In passive particle systems, the mechanical pressure acting on a solid wall pW is composed of two contributions: a kinetic (or osmotic) pressure term pT plus a direct (or virial) pressure pD originating from interparticle forces. When activity is introduced pT becomes negligible and it’s replaced by a new term, pS, the swim pressure arising from the propulsion forces of active particles that are in contact with the wall and oriented against it1. Activity also indirectly affects pD by contributing to determine the density correlators that appear in the definition of pD7. In the idealized situation where the reorientation dynamics of active particles is not affected by interactions with wall or other particles, it is found that pS can be expressed as a state function of bulk variables7,8. In both our experiments and simulations, interactions between bacteria and with the probe bead generate external torques that reorient active particles. Nevertheless, we can always calculate pD throughout the simulated system and evaluate pW over the surface of the bead. Figure 3b shows the mechanical pressure pW acting over the contour of the probe bead for three different positions of the bead with respect to the modulation mask. When the bead is fully immersed in the fast half disc, a uniform pressure is measured over the contour with a mean value given by pW = 1.1 in simulation reduced units (see Supplementary Note 2). When the particle is fully embedded in the slow region, still an approximately uniform pressure is found but this time with a much larger mean value of pW = 2.1. Supplementary Movies 2–4 show the dynamics of the simulated particle in the three positions. We can now compare these values of pW with the direct pressure pD evaluated in the neighborhood of the bead. We first calculate full pD maps as reported in Fig. 3a and then extract pD values around a circular contour right outside of the bead’s surface Fig. 3b. When the particle is in the slow region we find that the mechanical pressure pW can be fully explained by the direct pressure term pD. We can empirically define a swim pressure as the difference pS = pW − pD and conclude that it is negligible in the slow region. When an equation of state exists, pS is found to be proportional to the product of the free self-propulsion speed and the actual mean particle speed. Both these speeds are slow in the dark half disc because of the low activity induced by I− and the slowdown caused by the closely packed neighbors. On the contrary, when the bead is in the fast region, pD only accounts for 70% of the mean pW = 1.1 with an extra pressure of 0.3 that can be attributed to pS. In both these situations the net force on the particle and consequently the drift are both very small. Moving the particle right at the edge between the fast and the slow region pW becomes unbalanced and a net force appears causing particle drift. Although pW is found to decrease on both the fast facing half and on the slow one, the pressure on the slow side remains higher and pushes the bead towards the right. Comparison with pD shows that direct pressure is still responsible for all pW on the slow side, while pS = pW − pD remains equal to 0.3 as in the case where the bead is completely immersed in the fast region. It is also interesting to compare this estimated value of pS to the swim pressure \(\gamma \rho {v}_{+}^{2}\tau /2\) of an ideal active gas of run and tumble particles in 2D1. Using simulation parameters (in reduced units as defined in the Supplementary Note 2)γ = 1, v+ = 1, τ = 10 (inverse tumbling rate) and the average value of the particle density in the fast region ρ = 1, we find an ideal swim pressure that is greater than pS by an order of magnitude. This may be due to an effective interaction time τ that is not controlled by the inverse tumbling rate but rather by the typical interaction time with the bead scaling with a/v+ = 2.5. We can speculate that an interaction time that scales as the inverse speed may also be the reason why the swim pressure ~ ρv2τ is practically constant (ρ ∝ 1/v, τ ∝ 1/v) in the absence of interactions (see Fig. 2c) or at low densities such as those obtained in smooth speed gradients (see Supplementary Fig. 1). Experimentally, we can only access the integrated value of pW producing the drift. However, if the above interpretation is correct, we should be able to increase the drift speed if we could increase pD on the slow side leaving pS on the fast side unchanged. It has been pointed out already that, in the absence of particle currents a simple local momentum balance on the active particles must result in16,28:
with m(r) the polarization field as defined in16, γ the viscous drag along the self-propulsion direction and v(r) the speed pattern imposed with light. Eq. (1) states that the swim force density fS(r) = γv(r)m(r) must locally balance the gradient of direct pressure pD. Figure 3a reports the vector field fS(r) superimposed to the direct pressure field. Details on the calculation of fS(r) are given in Supplementary Note 2. It is quite evident that the high pD value in the slow region is maintained by a layer of polarized cells compressing densely packed cells in the dark half disc. When the probe is fully immersed in one of the two half disks and the current is zero we verify quantitatively Eq. (1) as shown in Fig. 4a. This suggests that if we increase the background speed v0, leaving light intensity within the modulation disc unchanged, pD in the slow region must increase resulting in a higher drift speed of the probe bead.
Figure 4b shows that, although the velocity gradient at the interface is kept constant (fixed v− and v+ with v+ ~ 3v−), the drift velocity strongly depends on the background intensity in both experiments (blue circles) and simulations (pink line). It should be noted however, that, although the speeds in the slow and fast half disks remain constant, changing the background speed v0 results in density readjustments as shown in Fig. 4c. Further details of density measurements in the three regions are shown in Supplementary Fig. 4. Ideally, for non-interacting bacteria, density ratios should match speed ratios with the constraint of conserving the total cell number. Specifically, the densities ρ+ and ρ−, when normalized to the background density ρ0, should increase linearly with v0 with slopes given by 1/v+ and 1/v−, respectively, shown as solid lines in Fig. 4c. In the dark region, however, ρ− follows this ideal trend only up to a saturation value that is approximately twice the background density ρ0 and where steric interactions probably prevent further accumulation. Both this saturation of ρ− and the associated slowing down of bacteria in densely packed regions should decrease swim pressure on the slow side7 while a strong direct pressure component builds up due to close packing and produces a faster drift.
Discussion
Our results can be explained by recognizing that activity can generate mechanical pressure on solid walls in two main ways. The first is the “swim pressure” or the direct thrust applied by a layer of active particles that are directly in contact with the wall and having a direction of self-propulsion polarized towards it. The second is through polarized regions in the bulk acting like self-generated body forces that can compress repulsive particles and generate a strong direct pressure term in response3,16. Both of these components can be modulated by shaping motility in space. In particular we find that when a probe particle is placed at the interface between a slow and a fast region, although swim pressure alone should be higher on the fast side, a layer of polarized cells surrounding the slow area generates there a direct pressure component that is strong enough to push the particle towards the fast, higher swim pressure side. Stated this way, the drift should not be strongly influenced by the shape of the modulation boundary and indeed this is confirmed by simulations using a square modulation region with the same area as the disc (see Supplementary Fig. 5). However, changing the area of the modulation region can have strong effects on the drift speed, affecting the density ratios in the three regions with different activities (see Supplementary Fig. 6). With the number of light-activated systems steadily increasing, understanding how a pattern of activity translates into a pressure field may stimulate the development of new transport strategies in closed microfluidic systems where pressure gradients could be generated internally. Future studies may also address the possibility of generating a net torque on anisotropic and achiral objects suspended in bacterial baths with spatially patterned motility.
Methods
Sample preparation
We grow the E. coli strain AB1157 transformed with a plasmid encoding the proteorhodopsin (PR), and depleted of the unc cluster that codes for F1 Fo-ATPase as described in ref. 24. Then, the cells are washed and suspended at the desired concentration in a motility buffer containing 10 mM potassium phosphate (pH 7.0), 0.1 mM EDTA (pH 7.0), 0.002% Tween 20, and lactate 10 mM. The dense suspension of photokinetic bacteria (optical density OD ≈ 15) is mixed with a ratio of 10:1 with sterically stabilized Polystyrene (10 μm PS-PEG microparticles, microParticles GmbH) at concentration 1% solid. The final concentration of particles in the sample is approximately 0.1% solid, and bacteria have an optical density of OD = 13.5. The mixed suspension is then loaded into commercial 3 μL sample chambers with a thickness of 20 μm (Leja, NL). The chamber was previously coated with PLL-PEG (PLL(20)-g[3.5]- PEG(5), SuSoS) using proprietary protocols to decrease the adhesion of the microparticles to the substrate. After cell loading, the chamber is sealed using vaseline to stop airflow. In this way, bacteria stop swimming once dissolved oxygen is exhausted29. In our case, this happened after a few minutes. The filled chamber is then placed under the optical microscope and observed in dark field illumination, focusing on the bottom plane of the chamber where the particles sediment.
Optics
Dark field imaging is performed using a custom inverted optical microscope equipped with a ×4 magnification objective (Nikon; NA = 0.13) and a high-sensitivity CMOS camera (Hamamatsu Orca-Flash 2.8). Patterns of green light (520 nm) are generated using a digital light processing (DLP) projector (Texas Instruments DLP Lightcrafter 4500) coupled to the same microscope objective used for imaging through a dichroic mirror. A more detailed description of the custom setup can be found14. The positions of the modulation disks in the the projected light patterns follow particle centers through an automatic feedback algorithm updated every dt = 0.5 s.
Numerical simulations
In the numerical model, swimmers are rod-shaped run-and-tumble particles of length ℓ and thickness σ. We indicate with v their self-propulsion speed and with α = 1/τ the tumbling rate at which particles undergo random reorientation of swimming direction. Immersed into the active bath there is a colloidal particle of radius a. All interactions between bacteria and between bacteria and the passive colloid are modeled by steric repulsive forces (the details about the numerical implementation can be found in Supplementary Note 2 and in refs. 23, 30, 31). To mimic photokinetic bacteria, we consider a swimming speed that varies in space according to light templates. As in the experimental set-up, in the colloidal particle’s frame, we individuate a circular region of radius R, centered at distance Δ from the center of the colloid. We consider three regions, the background (outside the circle) where particles move at speed v0, and the two semicircular regions of high v+ and low v− speed (see Fig. 1a). Simulations are performed in a square box of side L where periodic boundary conditions are employed. Choosing motility parameters suitable for describing E. coli bacteria, we set α = 0.1 (τ = 10), σ = 1/2 (in unit of v0 = 1 and ℓ = 1).
Data availability
Data supporting the results of this study are available from the corresponding authors upon request.
Code availability
The code used for the simulation is available from the corresponding authors upon request.
References
Takatori, S. C., Yan, W. & Brady, J. F. Swim pressure: stress generation in active matter. Phys. Rev. Lett. 113, 028103 (2014).
Elgeti, J. & Gompper, G. Run-and-tumble dynamics of self-propelled particles in confinement. EPL 109, 58003 (2015).
Yan, W. & Brady, J. F. The swim force as a body force. Soft Matter 11, 6235–6244 (2015).
Solon, A. P. et al. Pressure is not a state function for generic active fluids. Nat. Phys. 11, 673–678 (2015).
Angelani, L. Confined run-and-tumble swimmers in one dimension. J. Phys. A: Math. Theor. 50, 325601 (2017).
Das, S., Gompper, G. & Winkler, R. G. Local stress and pressure in an inhomogeneous system of spherical active brownian particles. Sci. Rep. 9, 1–11 (2019).
Solon, A. P. et al. Pressure and phase equilibria in interacting active brownian spheres. Phys. Rev. Lett. 114, 198301 (2015).
Winkler, R. G., Wysocki, A. & Gompper, G. Virial pressure in systems of spherical active Brownian particles. Soft Matter 11, 6680–6691 (2015).
Takatori, S. C., De Dier, R., Vermant, J. & Brady, J. F. Acoustic trapping of active matter. Nat. Commun. 7, 1–7 (2016).
Ginot, F. et al. Sedimentation of self-propelled janus colloids: polarization and pressure. N. J. Phys. 20, 115001 (2018).
Fily, Y., Kafri, Y., Solon, A. P., Tailleur, J. & Turner, A. Mechanical pressure and momentum conservation in dry active matter. J. Phys. A Math 51, 044003 (2017).
Junot, G., Briand, G., Ledesma-Alonso, R. & Dauchot, O. Active versus passive hard disks against a membrane: mechanical pressure and instability. Phys. Rev. Lett. 119, 028002 (2017).
Schnitzer, M. J. Theory of continuum random walks and application to chemotaxis. Phys. Rev. E 48, 2553 (1993).
Frangipane, G. et al. Dynamic density shaping of photokinetic E. coli. Elife 7, 36608 (2018).
Arlt, J., Martinez, V. A., Dawson, A., Pilizota, T. & Poon, W. C. Dynamics-dependent density distribution in active suspensions. Nat. Commun. 10, 2321 (2019).
Wysocki, A., Dasanna, A. K. & Rieger, H. Interacting particles in an activity landscape. N. J. Phys. 24, 093013 (2022).
Walter, J. M., Greenfield, D., Bustamante, C. & Liphardt, J. Light-powering escherichia coli with proteorhodopsin. Proc. Natl Acad. Sci. USA 104, 2408–2412 (2007).
Arlt, J., Martinez, V. A., Dawson, A., Pilizota, T. & Poon, W. C. Painting with light-powered bacteria. Nat. Commun. 9, 1–7 (2018).
Di Leonardo, R. et al. Bacterial ratchet motors. Proc. Natl Acad. Sci. USA 107, 9541–9545 (2010).
Sokolov, A., Apodaca, M. M., Grzybowski, B. A. & Aranson, I. S. Swimming bacteria power microscopic gears. Proc. Natl Acad. Sci. USA 107, 969–974 (2010).
Angelani, L. & Di Leonardo, R. Geometrically biased random walks in bacteria-driven micro-shuttles. N. J. Phys. 12, 113017 (2010).
Kaiser, A. et al. Transport powered by bacterial turbulence. Phys. Rev. Lett. 112, 158101 (2014).
Angelani, L., Di Leonardo, R. & Ruocco, G. Self-starting micromotors in a bacterial bath. Phys. Rev. Lett. 102, 048104 (2009).
Massana-Cid, H., Maggi, C., Frangipane, G. & Di Leonardo, R. Rectification and confinement of photokinetic bacteria in an optical feedback loop. Nat. Commun. 13, 1–8 (2022).
Maggi, C., Angelani, L., Frangipane, G. & Di Leonardo, R. Currents and flux-inversion in photokinetic active particles. Soft Matter 14, 4958–4962 (2018).
Koumakis, N. et al. Dynamic optical rectification and delivery of active particles. Soft Matter 15, 7026–7032 (2019).
Angelani, L. & Di Leonardo, R. Numerical modeling of bacteria propelled micromotors. Comput. Phys. Commun. 182, 1970–1973 (2011).
Omar, A. K., Wang, Z. G. & Brady, J. F. Microscopic origins of the swim pressure and the anomalous surface tension of active matter. Phys. Rev. E 101, 12604 (2020).
Schwarz-Linek, J. et al. Escherichia coli as a model active colloid: a practical introduction. Colloids Surf. 137, 2–16 (2016).
Paoluzzi, M., Di Leonardo, R. & Angelani, L. Self-sustained density oscillations of swimming bacteria confined in microchambers. Phys. Rev. Lett. 115, 188303 (2015).
Angelani, L., Maggi, C., Bernardini, M., Rizzo, A. & Di Leonardo, R. Effective interactions between colloidal particles suspended in a bath of swimming cells. Phys. Rev. Lett. 107, 138302 (2011).
Acknowledgements
We thank C. Maggi and S. Bianchi for useful discussions. The research leading to these results has received funding from the European Research Council under the ERC Grant Agreement No. 834615 (R.D.L.). L.A. and R.D.L. acknowledge financial support from the Italian Ministry of University and Research (MUR) under the PRIN2020 Grant No. 2020PFCXPE. M.P. has received funding from the European Union’s Horizon 2020 research and innovation program under the MSCA grant agreement No 801370 and by the Secretary of Universities and Research of the Government of Catalonia through Beatriu de Pinós program Grant No. BP 00088 (2018).
Author information
Authors and Affiliations
Contributions
N.P., G.F., and R.D.L. conceived the original idea and designed the experiments. G.F. performed preliminary experiments. N.P. and D.B. performed the experiments. M.P. and L.A. conceived and performed the numerical simulations. N.P., D.B., M.P., and R.D.L. analyzed the data. All the authors discussed the results and contributed to writing the manuscript.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing interests.
Peer review
Peer review information
Nature Communications thanks Félix Ginot, Sho Takatori, and the other anonymous reviewer(s) for their contribution to the peer review of this work. A peer review file is available.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Pellicciotta, N., Paoluzzi, M., Buonomo, D. et al. Colloidal transport by light induced gradients of active pressure. Nat Commun 14, 4191 (2023). https://doi.org/10.1038/s41467-023-39974-5
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-023-39974-5
- Springer Nature Limited