Abstract
Phototriggered click and clip reactions can endow chemical processes with high spatiotemporal resolution and sustainability, but are challenging with a limited scope. Herein we report photoswitchable reversible covalent conjugate addition-elimination reactions toward light-addressed modular covalent connection and disconnection. By coupling between photochromic dithienylethene switch and Michael acceptors, the reactivity of Michael reactions was tuned through closed-ring and open-ring forms of dithienylethene, allowing switching on and off dynamic exchange of a wide scope of thiol and amine nucleophiles. The breaking of antiaromaticity in transition states and enol intermediates of addition-elimination reactions provides the driving force for photoinduced change in kinetic barriers. To showcase the versatile application, light-mediated modification of solid surfaces, regulation of amphiphilic assemblies, and creation/degradation of covalent polymers on demand were achieved. The manipulation of dynamic click/clip reactions with light should set the stage for future endeavors, including responsive assemblies, biological delivery, and intelligent materials.
Similar content being viewed by others
Introduction
Through reversible formation, breakage, and exchange of covalent bonds dynamic covalent chemistry (DCC) has the advantage of adaptivity, self-correction, and degradability, with broad utility in the creation of functional molecules, assemblies, and materials1,2,3,4,5. Click chemistry allows modular covalent connection and has become one powerful tool in chemical, biological, and materials sciences6,7,8,9,10. To the contrary, clip (or declick) reactions focus on efficient bond cleavage11,12. Covalent connection and disconnection via DCC contributes to the development of both click and clip chemistry in a reversible and recyclable manner13,14,15,16. Light can serve as a clean stimulus for actively regulating chemical processes with high spatiotemporal resolution, giving access to high energy species and attracting extensive attention17,18,19,20. Photoswitches can bidirectionally shift between a thermodynamically stable state and a kinetically trapped metastable state in response to light and represent an idea way for driving DCC21,22,23. By coupling between a photoswitch and a dynamic covalent reaction (DCR) light-gated reactivity provides a layer of control unattainable in thermal reactions and further offers the dual benefits of light-mediated bond making and breaking. Through masking/unmasking reactive olefin and carbonyl functional groups with diarylethene, photoswitchable Diels–Alder reactions24,25,26 and imine condensation/hydrolysis27 were realized, respectively. Moreover, azobenzene and acylhydrazone attached boronic acids enabled tuning the equilibria and kinetics of cyclic boronic ester exchange by utilizing light-modulated intramolecular hydrogen bonding28,29. Recently, we reported remote control over dynamic C-N, C-O, and C-S bonds for switchable stability/degradability in covalent architectures via photoinduced ring-chain tautomerism and dual reactivity based DCC30. Despite significant advances, photoswitchable DCC remains challenging with limited scope.
Michael-type reactions are one class of the most explored among an expanding toolbox of DCRs and reversible click reactions (Fig. 1A)31,32,33,34. The synthetic accessibility and structural diversity of mono- and di-activated Michael acceptors, including α,β-unsaturated carbonyls and associated scaffolds (a of Fig. 1A), offer ample means for manipulating thermodynamic and kinetic features of conjugate additions. The introduction of a leaving group (XR3, X = O, S, NR) at β position further allows the realization of dynamic conjugate addition-elimination reactions toward the exchange of nucleophiles (b of Fig. 1A), thus providing opportunities for bond click and clip35,36,37,38. Dynamic conjugate additions were employed for the identification of protein inhibitors39,40,41 and the assembly of nanoparticles42,43. Moreover, Michael reactions afford a versatile avenue for the construction of covalent organic frameworks44,45,46 and adaptable polymer networks47,48,49,50,51. In addition, the creation of degradable covalent polymers was achieved by taking advantage of addition-elimination reactions of 1,3-dicarbonyl derived conjugate acceptors52,53,54. Light-induced thiol-ene click chemistry is complementary with Michael reactions, albeit through photoinitiated radical mechanism55,56. Photoswitchable dynamic conjugate addition-elimination reactions are rare, to the best of our knowledge. The efficient control of diverse DCRs with light would be advantageous to obtain new structures and functions.
Taking into consideration of the reaction mechanism (Fig. 1A), we were wondering the possibility of stabilizing/destabilizing Michael adduct intermediate (i.e., enol)57,58 with light for accelerating/decelerating the reaction. Toward this end, the conjugate acceptor of 4-cyclopentene-1,3-diketone derivative was fused with dithienylethene (DTE)23 on the ethene bridge (Fig. 1B). Cyclic 1,3-diketone scaffolds play a notable role in organic synthesis, medicinal chemistry, and optoelectronic materials59,60,61. We postulated that the rearrangement of π systems of DTE unit would induce a change in the reactivity of the Michael acceptor. Upon bidirectional photoswitching for photocyclization/photocycloreversion of DTE the open-ring and closed-ring forms would afford Michael adduct intermediates with 4π and 14π electrons, respectively. The varying antiaromatic character of these enol species and associated transition states would in turn influence the kinetic barriers of addition-elimination reactions, hence turning off/on the reactivity and achieving photoswitchable exchange of nucleophiles for covalent bond formation and scission. In the current work, we report light-induced dynamic conjugate addition-elimination reactions along with associated mechanistic insights. The application in the regulation of molecular assemblies and covalent polymers was further demonstrated, enriching the toolbox of reversible click/clip chemistry and paving the way for future studies.
Results and discussion
Design and synthesis
To realized the concept, a conjugate acceptor, namely 2-(ethoxymethylene)−4-cyclopentene-1,3-diketone (1), was chosen as the reactive motif with photoswitchble DTE unit attached at 4,5-position (Fig. 2A). The conjugate addition of mononucleophiles, such as thiols and amines, would lead to the formation of tetrahedral intermediate thioacetals and hemiaminal ethers, respectively. The subsequent departure of alcohols would give enol thioethers (2) and enamines (3), with each again as a new conjugate acceptor susceptible to Michael/retro-Michael reactions for the exchange of nucleophiles. In short, we sought a versatile platform wherein dynamic conjugate addition-elimination reactions would be dictated by light in conjunction with varying reactivity and departing ability of diverse nucleophiles.
DTE modified cyclopentene-1,3-diketone was constructed through Wittig–Horner reaction of 2,3-dithienylmaleic anhydride and phosphorus ylide followed by the rearrangement (Supplementary Figs. 1 and 2). The condensation reaction between 1,3-diketone and triethyl orthoformate afforded the desired conjugate acceptor (o-1, Supplementary Fig. 3). Upon electrocyclic ring-closure at 313 nm for 1.5 h, c-1 was obtained in high yield (95%) in the photostationary state (Fig. 2B). The irradiation at 650 nm (2 h) gave o-1 again, accomplishing bidirectional photoswitching. Furthermore, multiple cycles of photoswitching were realized, exhibiting great reversibility and fatigue-resistance (Supplementary Fig. 29). The measurement of absorbance spectra validated photochromic behaviors, as evidenced by yellow and green color for o-1 and c-1 (Fig. 2B and Supplementary Figs. 30 and 31).
Light-controlled exchange of alcohol/thiol nucleophiles
With the strategy in place, the kinetics of conjugate addition-elimination reactions was tracked. To contrast the reactivity directly, the individual reactions of o−1 and c−1 with nucleophiles were run. For example, the equilibrium of the reaction of c-1 with 1-propanol was reached after 60 h, but o-1 remained nearly unchanged after 3 weeks (Supplementary Figs. 32–34, entry 1 of Table 1). Similarly, the reaction of o-1 with 1-propanethiol (3.0 equiv.) in CD3CN proceeded pretty slowly, affording a yield of 38% for enol thioether o-2 after 35 days (Fig. 3A). In contrast, it took 12 h for the reaction of c-1 with 1-propanethiol for complete formation of c-2 (Supplementary Figs. 35–38, entry 2 of Table 1). A mixture of o-1 and thiol was also monitored under 313 nm illumination, faster than the reaction of c-1 in the dark (Supplementary Figs. 39 and 40). To showcase the generality, a wide range of thiols, including aromatic thiols, was tested (Supplementary Figs. 42–53, entries 3-6 of Table 1). The reaction of c−1 with p-toluenethiol gave desired c-2 (95%), while o−1 remained virtually intact after 1 week (Supplementary Figs. 42–44). Analogous results were obtained with sterically bulky 2-propanethiol and t-butanethiol, turning on and off their reactions with c−1 and o-1, respectively (Supplementary Figs. 45–50). The successful covalent bonding of thiol containing amino acid (i.e., cysteine) with c-1 was realized quantitatively (3 min) in aqueous media, further broadening the scope (Supplementary Figs. 51–53, entry 6 of Table 1). Moreover, photocycloreversion of c-2 under 650 nm light afforded o-2, and bidirectional photoswitching between o-2 and c-2 for multiple cycles was successful with high efficiency and fatigue-resistance (Supplementary Fig. 41). Despite the sluggishness of the direct conversion from o-1 to o-2, o-2 was facilely obtained through a detour of reactive c-1 and then c-2.
Having realized successful incorporation of thiols, the exchange of thiols was then studied. c-2 incorporating 1-propanethiol was created followed by the addition of benzylthiol (Supplementary Figs. 54–56, entry 7 of Table 1). After reaching equilibrium readily after 2 h benzylthiol derived product accumulated, with a decrease in the amount of original c-2 from 1-propanethiol. However, the corresponding thiol exchange with open-ring form o-2 was kinetically disfavored. Such a difference between o-2 and c-2 for thiol exchange is consistent with the trend of reactions of o-1 and c-1 with thiols.
Light-controlled exchange of amine nucleophiles
Encouraged by photocontrolled modulation of reactivity toward thiols, reactions with amines were next examined (Supplementary Figs. 57–104, entries 8-23). A mixture of 1 and 1-butylamine (1.5 equiv.) gave enamine 3 within 3 min in 1H NMR analysis irrespective of electrocyclic open-ring (o−1) and closed-ring (c−1) forms (Supplementary Figs. 57–59, entry 8 of Table 1). The successful creation of o-3 was further validated by its crystal structure (Supplementary Fig. 28). DTE unit adopts an antiparallel conformation, and an exocyclic enamine resides in cyclic 1,3-diketone motif, which is stabilized via intramolecular NH…O hydrogen bonding (2.20 Å). Analogous results were found with isobutylamine (Supplementary Figs. 60–62, entry 9 of Table 1). To probe the discrimination between o−1 and c−1 the kinetics was monitored by absorbance spectra in dilute solution. The reaction of c-1 (25 μM) with 1-butylamine occurred immediately (within 30 s) once mixed together, while it took 13 min for the corresponding reaction of o-1 to complete, indicating improved reactivity for closed-ring form (Fig. 3B and Supplementary Figs. 63 and 64).
Gratifyingly, the reactions of o-1 and c-1 with aniline (1.5 equiv.) required 26 h and 3 min to complete, respectively (Fig. 3C and Supplementary Figs. 65–67, entry 10 of Table 1). Through tracking the kinetics of o-1 and c-1 via 1H NMR and UV-vis spectra (Supplementary Fig. 68), the rate enhancement was estimated be over 104. The significantly enhanced reactivity of c-1 over o-1 further enabled its rapid and quantitative reactions with p-anisidine and p-trifluromethylaniline (Supplementary Figs. 69–74, entries 11 and 12 of Table 1). Moreover, the scission of C-S bond was switched off and on with the reactions of o−2 and c-2 with aniline, respectively (Supplementary Figs. 80–82, entry 15 of Table 1). Photoswitchable formation of 3 incorporating lysine was realized with cysteine derived 2 via amine/thiol exchange, and again strong acceleration was found with closed-ring form (Supplementary Figs. 83–85, entry 16 of Table 1).
The differentiation between o−1 and c-1 for sterically congested secondary amines was also feasible, further showcasing the power of the current system (Supplementary Figs. 86–92, entries 17 and 18 of Table 1). While the reaction of c-1 and diisopropylamine (1.5 equiv.) led to quantitative formation of enamine c-3 after 3 min, the corresponding reaction of o-1 gave a yield of 80% (o-3) after 7 days (Fig. 3D and Supplementary Figs. 86–89). In addition, the reactions of o−2 and c-2 with secondary amines, such as diisopropylamine, for amine/thiol exchange were studied, kinetically favoring the latter (Supplementary Figs. 93–96, entries 19-20 of Table 1). In spite of electrocyclic ring-opening of c-3 to form o-3, attempts to convert o-3 back to c-3 failed. This is likely due to photoinduced electron transfer (PET) imparted by nitrogen lone pair, resulting in the deactivation of excited state of o-362.
To explore photoinduced scission of C-N bonds amine/amine exchange was next investigated. The individual solutions of o-3 and c-3 incorporating isobutylamine created in situ were mixed with 1-butylamine and then tracked. The scrambling of amines was detected with c-3 reaching equilibrium after 4 days, while o-3 remained poorly reactive after 40 days (Supplementary Figs. 97, 98, entry 21 of Table 1). Furthermore, amine exchange took place within 3 min for the reaction of piperidine or aniline derived c-3 with 1-butylamine, incorporating 1-butylamine quantitatively and matching the higher nucleophilicity of aliphatic primary amines. In contrast, the displacement of amines was again kinetically suppressed with corresponding o-3 (Supplementary Figs. 99–104, entries 22 and 23 of Table 1). As a result, the extent of acceleration for dynamic exchange reactions and the selectivity toward different types of nucleophiles can be regulated by light, enabling phototriggered covalent connection and disconnection.
Mechanistic insights
To determine the activation energies of the addition-elimination reactions experimentally, the kinetics of c-1/o-1 with 1-propanthiol (10 equiv.) was studied at different temperatures (Fig. 4A). By fitting the experimental data with a pesudo-first order kinetics equation, the rate constants kc/o were obtained and then plotted in an Arrhenius plot (Supplementary Figs. 105 and 106), giving the activation energies of 17.46 kcal mol−1 for o-2 and 12.15 kcal mol−1 for c-2 (Fig. 4B), respectively. Furthermore, the rate constants of reactions of c-1/o-1 with aniline at room temperature were measured, modulating the rate over 4 orders of magnitude (Supplementary Fig. 107).
To probe the mechanism of light-activated DCRs, density functional theory (DFT) calculations were further employed to identify potential intermediates and transition states (TSs). Taking o-1 as an example, a concerted mechanism for nucleophilic attack of 1-propanethiol and proton transfer was found via a six-membered ring TS (o-TS1, Fig. 4C and Supplementary Fig. 108), resulting in thioacetal (o-4) with a cyclic enol structure. The elimination of ethanol also proceeds through a six-membered ring TS (o-TS2) to afford enol thioether product o-2. Upon photocyclization of o-1 to create c-1 the energy is significantly raised. Similar to o-1, the combination of c-1 and 1-propanethiol gives thioacetal (c-4) via a six-membered ring TS (c-TS1), as also the case for subsequent departure of ethanol (c-TS2) to furnish c-2 (Fig. 4C and Supplementary Fig. 108). The kinetic barriers (ΔG≠) for addition and elimination sequences were compared, and the reaction of higher energy metastable form (i.e., c-1) is significantly kinetically favored over the thermodynamic stable form (o-1) by around 5.7 kcal mol−1 (Fig. 4C), largely matching the difference in measured reaction barriers (5.3 kcal mol−1).
The photoinduced activation is attributed to the loss of the antiaromatic feature for the stabilization of transition states (c-TS1 and c-TS2) as well as the enol intermediate (c-4) in their corresponding closed-ring forms (Fig. 4D and Supplementary Fig. 108). The calculation of nucleus-independent chemical shift (NICS) values63, an index for quantifying aromaticity/antiaromaticity, confirmed the rationalization. o-4 afforded a NICS(1)zz value of 17.53 ppm, falling in line with its antiaromatic character. In contrast, a NICS(1)zz value of -0.25 ppm was found for c-4. Such a sharp decrease in NICS(1)zz echoes a loss of antiaromaticity in the enol form (c-4) upon photocyclization. Moreover, a similar trend was obtained with o-TS1/c-TS1 and o-TS2/c-TS2. Light-induced breaking of antiaromaticity plays a stabilizing role in c-TS1 (−0.59 ppm) and c-TS2 (0.75 ppm) as compared to o-TS1 (11.16 ppm) and o-TS2 (11.39 ppm). Analogous findings were found for the reaction of 1 with 1-butylamine, with a significantly lower barrier for c-1 than o-1 (Supplementary Fig. 109).
Regulation of molecular assemblies
Having achieved photoswitchable conjugate addition-elimination reactions, we next set to show the application potential in the control of molecular assemblies. First, photoaddressed modification of solid surfaces was explored, as surfaces exhibiting switchable wettability and functionality could generate interest in many aspects, such as microfluidic chips and lithography64,65,66. Toward this end, glass slides with porous silica coating were modified with 3-mercaptopropyltriethoxysilane to introduce thiol groups (Fig. 5A). By immersing the glass into a solution of c-1, c-2 was readily grated onto the surface via the formation of C-S bond, with the static water contact angle changing from 68.2° to 93.2°. In sharp contrast, the slide upon exposure with o-1 remained nearly intact, as evidenced by the maintenance of the contact angle (68.5°). Moreover, the treatment of modified coating (c-2) with aniline solution led to the cleavage of C-S bond via amine/thiol exchange, thereby recovering the original state (contact angle from 93.2° to 70.5°). However, upon irradiation with 650 nm light to afford o-2 (88.5°) the immobilization of attachment was apparent after the treatment with aniline (contact angle 87.7°), as the dynamic exchange reaction was turned off. In essence, photoswitchable modification of solid surfaces was achieved by utilizing active and inactive forms of conjugate acceptors for reversible click/clip reactions.
To further showcase the spatial resolution of light, light-induced modification of patterning was performed. The light yellow color of letters “UCAS” was written on a piece of filter paper with the solution of o-1 (Fig. 5B). After illumination at 313 nm with “AS” masked in the dark, the color of “UC” turned blackish green due to the appearance of c-1. Since the exchange rate between c-1/o-1 and thiols was different, letters “UC” selectively changed to green under 1-propanethiol vapor, with “AS” remaining intact. Upon irradiation at 313 nm and retreatment with 1-propanethiol vapor, “AS” was also written in the form c-2. The golden color of “UC” was finally obtained on purpose after illumination at 650 nm while “AS” was shielded from light. Photoswitchable reactivity thereby allowed the realization of the color-changing pattern with spatial resolution.
Light-controlled amphiphilic assemblies were next studied to demonstrate the versatility. An amphiphile (c-2) was synthesized in situ from c-1 and a thiol containing a hydrophilic oligo(ethylene glycol) chain (5), with DTE serving as the hydrophobic portion (Fig. 5C and Supplementary Figs. 110–114). Transmission electron microscopy (TEM) revealed the formation of spherical assemblies, with a diameter around 200 nm. The size was also confirmed by scanning electron microscopy (SEMs) experiments (Supplementary Fig. 117). The morphology was maintained upon illumination at 650 nm to convert c-2 to o-2. The addition of aniline into c-2 triggered the decomposition of amphiphiles as a result of C-S bond breaking, and the formation of large aggregates was observed. When the exchange was suppressed with o-2 the disassociation was accordingly turned off (Supplementary Figs. 115 and 116).
Finally, the regulation of polymers was explored by taking advantage of photoswitchable DCC. The creation of degradable, recyclable polymers is attracting significant attention toward the goal of improved sustainability67,68,69. A bifunctional Michael acceptor (6, Fig. 6A and Supplementary Figs. 4–7) was synthesized and characterized. Upon irradiation of o-6 and tetra-functional thiol crosslinker (7) at 313 nm for 2 h, polymerization occurred, creating c-8 (Fig. 6A and Supplementary Fig. 118). However, no apparent reaction between o-6 and 7 was found after 7 days (Supplementary Fig. 119). Photocycloreversion of c-8 at 650 nm afforded o-8, and bidirectional switching between o-8 and c-8 was feasible (Supplementary Fig. 120). Amine/thiol exchange with aniline enabled the destruction of polymer network (c-8) and dissolution after 48 h, confirmed by the observation of aniline derived c-9 (Fig. 6B). In contrast, the solid-like material of locked o-8 was maintained and became swollen after two days. Oscillatory rheology (Fig. 6C), NMR analysis (Supplementary Figs. 124 and 125), GPC results (Supplementary Fig. 126), and mass spectra (Supplementary Fig. 127) validated controlled degradation of polymers. For example, the elastic solid feature was evident for o-8 with or without aniline, possessing a larger storage modulus (G’) than the loss modulus (G”). Differently, upon treatment of c-8 with aniline G’ was overtaken by G”, echoing the disassembly of polymers (Fig. 6C). The degradation of polymers was further attained with piperidine and diisopropylamine (Supplementary Figs. 128 and 129). As a result, through connecting/disconnecting photoswitchable dynamic covalent linkages light-mediated on-demand construction/degradation of covalent polymers was realized.
In this work, we have developed a versatile platform for light-controlled dynamic covalent conjugate addition-elimination reactions. Photoswitching between open-ring and closed-ring forms of dithienylethene enables the regulation of the reactivity of coupled Michael acceptors, toggling off and on the dynamic exchange of a broad range of thiol and amine nucleophiles for covalent connection and disconnection. Mechanistic studies revealed that the variation of antiaromaticity in the transition states and enol intermediates of conjugate addition-elimination plays a critical role in photoactivated dynamic covalent reactions. To show the potential the utility in different operating environments was demonstrated with photoaddressed modification of surfaces, regulation of amphiphilic assemblies, and creation/degradation of covalent polymers. Due to the mild reaction conditions and readily available reagents the current platform makes a valuable addition to light-mediated click and clip chemistry. The toolbox for spatiotemporal manipulation of dynamic covalent bonds should provide opportunities for many aspects, such as molecular assemblies, targeted delivery, intelligent materials, and sustainable chemistry.
Methods
General
1H NMR and 13C NMR spectra were recorded on a 400 MHz Bruker Biospin avance III spectrometer. Deuterated reagents for characterization and in situ reactions were purchased from Sigma-Aldrich Chemical Co. and Cambridge Isotope Laboratories, Inc. (purity ≥99.9%). All other reagents were obtained from commercial sources and were used without further purification, unless indicated otherwise. The chemical shifts (δ) for 1H NMR spectra, given in ppm, are referenced to the residual proton signal of the deuterated solvent. Mass spectra were recorded on a Bruker IMPACT-II or ThermoScientific LCQ Fleet spectrometer. Crystallographic data was collected on a Mercury single crystal diffractometer at room temperature. The structures were solved with direct methods by using OlexSys or SHELXS-97 and refined with the full-matrix least-squares technique based on F2 by using the OlexSys or SHELXL-97. The UV-Vis spectra were recorded on a Perkin-Elmer Lambda 365 spectrometer. TEM images were obtained on a Tecnai F20 Field Emission transmission electron microscope. SEM images were obtained on a SU-8010 Field Emission scanning electron microscope. The UV and visible light irradiation experiments were carried out on a CEL − HXF 300 xenon lamp with bandpass filters at 313 ± 10 nm (2.6 W) and 650 ± 10 nm (16.6 W), respectively.
Dynamic covalent reactions
Dynamic covalent reactions (DCRs) were performed in situ in CD3CN at room temperature without isolation and purification. To a stirred solution of Michael acceptor ( ~ 5 mM, 1.0 equiv.) in CD3CN (0.5 mL), was added one mononucleophile (RSH (3.0 equiv.), RNH2 (1.5 equiv.), or R1R2NH (1.5 equiv.)). The reaction was tracked and characterized by 1H NMR and ESI mass spectral analysis. See specific conditions in figure captions of the main text or supplementary information if necessary.
Surface experiments
Glass slides were cleaned for 12 h (each side) in a Piranha solution (15 mL 30 wt% H2O2 and 35 mL conc. sulfuric acid). The glass slides were rinsed with water and then sonicated in deionized water for 2 min (repeated 2 times). Glass slides were then placed in a vacuum oven for 12 h at 120 °C to fully dry. Dry glass slides were submerged in 10 v/v% solution of 3-(mercaptopropyl)trimethoxysilane (MTS) in dry toluene (~20 h). The slides were then rinsed with toluene and sonicated in toluene for 2 min (repeated 2 times). The slides were placed in a 120 °C vacuum oven for 1 h to anneal. The slides were then rinsed with toluene and deionized water to remove any additional MTS. Contact angle of ultrapure water: 68° ± 1.
To examine surface functionalization by using the reaction of 1 with attached thiol, static contact angle analysis was performed following the procedure. MTS -functionalized slides were subjected to six conditions: a) submerge the slide in acetonitrile as a control for 12 h; b) submerge the slide in a solution of o-1 in acetonitrile (20 mM) for 12 h; c) submerge the slide in a solution of c-1 in acetonitrile (20 mM) for 12 h; d) reaction-modified slide in the step c was placed under 650 nm light for 2 h; e) reaction-modified slide in the step c was submerged in a solution of aniline in acetonitrile (100 mM for 30 min; f) reaction-modified slide in the step d was submerged in a solution of aniline in acetonitrile (100 mM) for 30 min. Each slide was washed with acetonitrile and allowed to dry before analysis. Based on the contact angle analysis, the contact angle of the thiol-modified glass slide did not change after steps a and b, while the contact angle of the glass slide increased after steps c and d. After step e the thiol surface was restored. On the contrary, the surface contact angle remained unchanged after step f. Therefore, light-controlled modification of the solid surface was achieved.
Light-controlled amphiphilic assemblies
The hydrophilic chain 2,5,8,11-tetraoxatridecane-13-thiol (PEGSH, 5) was prepared according to the literature70. The creation of the amphiphiles was carried out according to the following general procedure. To a solution of o-1 (1.24 mg, 0.0025 mmol) or c-1 (1.24 mg, 0.0025 mmol) in CD3CN (0.5 mL) was added PEGSH (3 equiv.). The reaction was run for 12 h and monitored by 1H NMR. Compound c-1 completely converted to c-2 (PEGSH) at the end of the reaction, while o-1 did not. Distilled water (5 mL) was slowly dropped into a CD3CN solution of c-2 (PEGSH) in a glass vial followed by sonication. The mixture was diluted 20 times with a solution of distilled water and MeCN (9:1) and used for SEM and TEM imaging. The solution of o-2 (PEGSH) was created by irradiation of c-2 (PEGSH) at 650 nm for 2 h. The assemblies of o-2 (PEGSH) and other control samples were prepared according to general procedure.
Light-controlled regulation of polymers
Polymer 8 was prepared and characterized in detail. o-6 (6 mg) and 4-arm poly(ethylene glycol) thiol (≥ 95.0%, Mn ca. 5000 Da) (37.5 mg) were dissolved in CHCl3:CH3CN (1:5, 0.5 mL) and then illuminated under UV light (313 nm, 2 h) to afford polymer c-8 (Mn = 107364, Mw = 208,222, PDI = 1.94). c-8 was switched to the insoluble polymer o-8 after illumination under visible light (650 nm, 5 h). The solution was transferred to a mold with a diameter of 20 mm and a thickness of 2 mm and dried for 4 h, and the residue was then swollen in water to remove the residual reagent and dried until a constant weight for storage.
Fourier transform infrared (FTIR) spectra were recorded at room temperature on a Bruker VERTEX70 spectrometer equipped with an attenuated total reflectance (ATR) accessory for direct measurement on starting materials and polymers. Sampling was carried out over 4000–400 cm−1. Gel permeation chromatography (GPC) was run on a Waters 1515 or 1525 high performance liquid chromatography instrument equipped with a 2414 refractive index detector and a set of Styragel mixed-C columns. The oven temperature was set at 40 °C. DMF was used as a mobile phase, and the flow rate was 1.0 mL/min. Thermogravimetric analysis (TGA) was obtained on a Netzsch TG 209 F1 S4Libra® at a heating rate of 10 °C/min under nitrogen atmosphere. Differential scanning calorimetry (DSC) analyses were performed on a Netzsch DSC 214 Polyma under nitrogen atmosphere at a heating rate of 5 °C/min with an empty aluminum pan as a reference. Tensile tests were conducted on a Shimadzu AG-X Plus 100KN instrument. For tensile tests samples with dimensions of 20 × 3 × 2 mm were used. The rheological properties of c-8 and o-8 were evaluated by an Anton paar rheometer (MCR302). Briefly, the storage modulus (G′) and loss modulus (G″) were measured with the angular frequency from 0.1 to 100 rad/s. All measurements were conducted under constant humidity (60%) and temperature (25 °C).
Computations
Density functional theory (DFT) calculations were performed by using Gaussian 09 packages. The method and basis set of M06-2X-D3/def2-SVPP with an ultrafine integration grid were employed for the optimization and frequency analysis. The polarizable continuum model (PCM) was included for acetonitrile. By frequency analysis the number of imaginary frequencies for minima and transition state is 0 and 1, respectively. Single point energy calculations were further performed on the pre-optimized geometries at M06-2X-D3/def2-TZVPP level. The nucleus-independent chemical shift (NICS) calculation was conducted at M06-2X/def2-TZVPP level.
Data availability
The data supporting the findings of this study are provided in the Supplementary Information. The X-ray crystallographic coordinates for structures reported in this study have been deposited at The Cambridge Crystallographic Data Centre (CCDC) under deposition number 2179459 for o-3. These data can be obtained free of charge from The Cambridge Crystallographic Data Centre at www.ccdc.cam.ac.uk/data_request/cif. Molecular coordinates of calculated structures and crystal structure of o-3 are provided as files Supplementary Data 1 and Supplementary Data 2, respectively. All other data are available from the authors on request.
References
Rowan, S. J., Cantrill, S. J., Cousins, G. R., Sanders, J. K. & Stoddart, J. F. Dynamic covalent chemistry. Angew. Chem. Int. Ed. 41, 898–952 (2002).
Jin, Y., Yu, C., Denman, R. J. & Zhang, W. Recent advances in dynamic covalent chemistry. Chem. Soc. Rev. 42, 6634–6654 (2013).
Lehn, J.-M. Perspectives in chemistry-aspects of adaptive chemistry and materials. Angew. Chem. Int. Ed. 54, 3276–3289 (2015).
Li, J., Nowak, P. & Otto, S. Dynamic combinatorial libraries: from exploring molecular recognition to systems chemistry. J. Am. Chem. Soc. 135, 9222–9239 (2013).
Wilson, A., Gasparini, G. & Matile, S. Functional systems with orthogonal dynamic covalent bonds. Chem. Soc. Rev. 43, 1948–1962 (2014).
Kolb, H. C., Finn, M. G. & Sharpless, K. B. Click chemistry: diverse chemical function from a few good reactions. Angew. Chem. Int. Ed. 40, 2004–2021 (2001).
Thirumurugan, P., Matosiuk, D. & Jozwiak, K. Click chemistry for drug development and diverse chemical-biology applications. Chem. Rev. 113, 4905–4979 (2013).
Xi, W. X., Scott, T. F., Kloxin, C. J. & Bowman, C. N. Click chemistry in materials science. Adv. Funct. Mater. 24, 2572–2590 (2014).
Barrow, A. S. et al. The growing applications of SuFEx click chemistry. Chem. Soc. Rev. 48, 4731–4758 (2019).
Kumar, G. S. & Lin, Q. Light-triggered click chemistry. Chem. Rev. 121, 6991–7031 (2021).
Shieh, P., Hill, M. R., Zhang, W., Kristufek, S. L. & Johnson, J. A. Clip chemistry: diverse (bio)(macro)molecular and material function through breaking covalent bonds. Chem. Rev. 121, 7059–7121 (2021).
Yang, Y. et al. Clip-off chemistry: synthesis by programmed disassembly of reticular materials. Angew. Chem. Int. Ed. 61, e202111228 (2022).
Billiet, S. et al. Triazolinediones enable ultrafast and reversible click chemistry for the design of dynamic polymer systems. Nat. Chem. 6, 815–821 (2014).
Collins, J., Xiao, Z. Y., Mullner, M. & Connal, L. A. The emergence of oxime click chemistry and its utility in polymer science. Polym. Chem. 7, 3812–3826 (2016).
Golovanov, I. S. et al. Exploiting coupling of boronic acids with triols for a pH-dependent “click-declick” chemistry. J. Org. Chem. 83, 9756–9773 (2018).
Chao, Y. et al. Sulfur-phenolate exchange: SuFEx-derived dynamic covalent reactions and degradation of SuFEx polymers. Angew. Chem. Int. Ed. 61, e202207456 (2022).
Aubert, S., Bezagu, M., Spivey, A. C. & Arseniyadis, S. Spatial and temporal control of chemical processes. Nat. Rev. Chem. 3, 706–722 (2019).
Ankenbruck, N., Courtney, T., Naro, Y. & Deiters, A. Optochemical control of biological processes in cells and animals. Angew. Chem. Int. Ed. 57, 2768–2798 (2018).
Klan, P. et al. Photoremovable protecting groups in chemistry and biology: reaction mechanisms and efficacy. Chem. Rev. 113, 119–191 (2013).
Lu, P. et al. Wavelength-selective light-matter interactions in polymer science. Matter 4, 2172–2229 (2021).
Frisch, H., Marschner, D. E., Goldmann, A. S. & Barner-Kowollik, C. Wavelength-gated dynamic covalent chemistry. Angew. Chem. Int. Ed. 57, 2036–2045 (2018).
Kathan, M. & Hecht, S. Photoswitchable molecules as key ingredients to drive systems away from the global thermodynamic minimum. Chem. Soc. Rev. 46, 5536–5550 (2017).
Irie, M., Fukaminato, T., Matsuda, K. & Kobatake, S. Photochromism of diarylethene molecules and crystals: memories, switches, and actuators. Chem. Rev. 114, 12174–12277 (2014).
Asadirad, A. M., Boutault, S., Erno, Z. & Branda, N. R. Controlling a polymer adhesive using light and a molecular switch. J. Am. Chem. Soc. 136, 3024–3027 (2014).
Lemieux, V., Gauthier, S. & Branda, N. R. Selective and sequential photorelease using molecular switches. Angew. Chem. Int. Ed. 45, 6820–6824 (2006).
Fuhrmann, A. et al. Conditional repair by locally switching the thermal healing capability of dynamic covalent polymers with light. Nat. Commun. 7, 13623 (2016).
Kathan, M. et al. Light-driven molecular trap enables bidirectional manipulation of dynamic covalent systems. Nat. Chem. 10, 1031–1036 (2018).
Accardo, J. V., McClure, E. R., Mosquera, M. A. & Kalow, J. A. Using visible light to tune boronic acid–ester equilibria. J. Am. Chem. Soc. 142, 19969–19979 (2020).
Barsoum, D. N., Kirinda, V. C., Kang, B. & Kalow, J. A. Remote-controlled exchange rates by photoswitchable internal catalysis of dynamic covalent bonds. J. Am. Chem. Soc. 144, 10168–10173 (2022).
Hai, Y. et al. Light-induced formation/scission of C-N, C-O, and C-S bonds enables switchable stability/degradability in covalent systems. J. Am. Chem. Soc. 143, 20368–20376 (2021).
Michael, A. Ueber die addition von natriumacetessig‐ und natriummalonsurethern zu den aethern ungesttigter suren. J. Peakt. Chem. 35, 349–356 (1886).
Worch, J. C., Stubbs, C. J., Price, M. J. & Dove, A. P. Click Nucleophilic conjugate additions to activated alkynes: exploring thiol-yne, amino-yne, and hydroxyl-yne reactions from (bio)organic to polymer chemistry. Chem. Rev. 121, 6744–6776 (2021).
Shi, B. & Greaney, M. F. Reversible michael addition of thiols as a new tool for dynamic combinatorial chemistry. Chem. Commun. 886–888 (2005).
Zhang, B. et al. Probing the mechanism of thermally driven thiol-Michael dynamic covalent chemistry. Org. Biomol. Chem. 16, 2725–2734 (2018).
Diehl, K. L. et al. Click and chemically triggered declick reactions through reversible amine and thiol coupling via a conjugate acceptor. Nat. Chem. 8, 968–973 (2016).
Zhuang, J. et al. A programmable chemical switch based on triggerable michael acceptors. Chem. Sci. 11, 2103–2111 (2020).
Joshi, G. & Anslyn, E. V. Dynamic thiol exchange with β-sulfido-α,β-unsaturated carbonyl compounds and dithianes. Org. Lett. 14, 4714–4717 (2012).
Reddi, R. N. et al. Tunable methacrylamides for covalent ligand directed release chemistry. J. Am. Chem. Soc. 143, 4979–4992 (2021).
Lee, C. U. & Grossmann, T. N. Reversible covalent inhibition of a protein target. Angew. Chem. Int. Ed. 51, 8699–8700 (2012).
Krishnan, S. et al. Design of reversible, cysteine-targeted Michael acceptors guided by kinetic and computational analysis. J. Am. Chem. Soc. 136, 12624–12630 (2014).
Abdeldayem, A., Raouf, Y. S., Constantinescu, S. N., Moriggl, R. & Gunning, P. T. Advances in covalent kinase inhibitors. Chem. Soc. Rev. 49, 2617–2687 (2020).
Arslan, M. et al. Bioinspired anchorable thiol-reactive oolymers: synthesis and applications toward surface functionalization of magnetic nanoparticles. Macromolecules 47, 5124–5134 (2014).
Alkan, B., Daglar, O., Aydogan Temel, B., Durmaz, H. & Temel, G. Rapid synthesis of polyester based single-chain polymeric nanoparticles via an intra-molecular aza-Michael addition reaction. Polym. Chem. 13, 2442–2449 (2022).
Rao, M. R., Fang, Y., De Feyter, S. & Perepichka, D. F. Conjugated covalent organic frameworks via Michael addition-elimination. J. Am. Chem. Soc. 139, 2421–2427 (2017).
Sun, Q. et al. Postsynthetically Modified covalent organic frameworks for efficient and effective mercury removal. J. Am. Chem. Soc. 139, 2786–2793 (2017).
Xu, S. et al. Combination of knoevenagel polycondensation and water-assisted dynamic michael-addition-elimination for the synthesis of vinylene-Linked 2D covalent organic frameworks. Angew. Chem. Int. Ed. 61, e202202492 (2022).
Zhang, B. et al. Dynamic thiol-michael chemistry for thermoresponsive rehealable and malleable networks. Macromolecules 49, 6871–6878 (2016).
FitzSimons, T. M., Oentoro, F., Shanbhag, T. V., Anslyn, E. V. & Rosales, A. M. Preferential control of forward reaction kinetics in hydrogels crosslinked with reversible conjugate additions. Macromolecules 53, 3738–3746 (2020).
Xiang, L., Liu, X., He, Y. & Zhang, K. Eye-readable dynamic covalent click reaction and its application in polymer synthesis. Macromolecules 53, 5434–5444 (2020).
Van Herck, N. et al. Covalent adaptable networks with tunable exchange rates based on reversible thiol-yne cross-linking. Angew. Chem. Int. Ed. 59, 3609–3617 (2020).
Herbert, K. M. et al. Controlling the morphology of dynamic thia-michael networks to target pressure-sensitive and hot melt adhesives. ACS Appl. Mater. Interfaces 13, 27471–27480 (2021).
Christensen, P. R., Scheuermann, A. M., Loeffler, K. E. & Helms, B. A. Closed-loop recycling of plastics enabled by dynamic covalent diketoenamine bonds. Nat. Chem. 11, 442–448 (2019).
Feng, X., Wu, T., Sun, X. & Qian, X. “Indanonalkene” photoluminescence platform: application in real-time tracking the synthesis, remodeling, and degradation of soft materials. J. Am. Chem. Soc. 143, 21622–21629 (2021).
Ishibashi, J. S. & Kalow, J. A. Vitrimeric silicone elastomers enabled by dynamic meldrum’s acid-derived cross-links. ACS Macro Lett. 7, 482–486 (2018).
Fairbanks, B. D. et al. Photoclick chemistry: a bright idea. Chem. Rev. 121, 6915–6990 (2021).
Lowe, A. B. Thiol-ene “click” reactions and recent applications in polymer and materials synthesis: a first update. Polym. Chem. 5, 4820–4870 (2014).
Mather, B. D., Viswanathan, K., Miller, K. M. & Long, T. E. Michael addition reactions in macromolecular design for emerging technologies. Prog. Polym. Sci. 31, 487–531 (2006).
Nising, C. F. & Brase, S. Recent developments in the field of oxa-michael reactions. Chem. Soc. Rev. 41, 988–999 (2012).
Liu, M. et al. AoiQ catalyzes geminal dichlorination of 1,3-diketone natural products. J. Am. Chem. Soc. 143, 7267–7271 (2021).
Shen, S. et al. Solution-processable organic molecule photovoltaic materials with bithienyl-benzodithiophene central unit and indenedione end groups. Chem. Mater. 25, 2274–2281 (2013).
Saha, R. et al. Unusual behavior of donor-acceptor stenhouse adducts in confined space of a water-soluble PdII8 molecular vessel. J. Am. Chem. Soc. 141, 8638–8645 (2019).
Perrier, A., Maurel, F. & Jacquemin, D. Single molecule multiphotochromism with diarylethenes. Acc. Chem. Res. 45, 1173–1182 (2012).
Gershoni-Poranne, R. & Stanger, A. Magnetic criteria of aromaticity. Chem. Soc. Rev. 44, 6597–6615 (2015).
Liu, J., Butt, H.-J. & Wu, S. Reconfigurable surfaces based on photocontrolled dynamic bonds. Adv. Funct. Mater. 30, 1907605 (2019).
Li, L., Feng, W., Welle, A. & Levkin, P. A. UV-induced disulfide formation and reduction for dynamic photopatterning. Angew. Chem. Int. Ed. 55, 13765–13769 (2016).
Mueller, P. et al. Molecular switch for sub-diffraction laser lithography by photoenol intermediate-state cis-trans isomerization. ACS Nano 11, 6396–6403 (2017).
Zheng, N., Xu, Y., Zhao, Q. & Xie, T. Dynamic covalent polymer networks: a Molecular platform for designing functions beyond chemical recycling and self-healing. Chem. Rev. 121, 1716–1745 (2021).
Coates, G. W. & Getzler, Y. D. Chemical recycling to monomer for an ideal, circular polymer economy. Nat. Rev. Mater. 5, 501–516 (2020).
Helms, B. A. & Russell, T. P. Reaction: polymer chemistries enabling cradle-to-cradle life cycles for plastics. Chem 1, 816–818 (2016).
Yang, H. et al. A modular synthetic route involving N-aryl−2-nitrosoaniline intermediates leads to a new series of 3-substituted halogenated phenazine antibacterial agents. J. Med. Chem. 64, 7275–7295 (2021).
Acknowledgements
We thank the National Natural Science Foundation of China (92156010, L.Y.; 22071247, L.Y.; 22101283, H.Z.; 22101284, H.Y.), the Strategic Priority Research Program (XDB20000000, L.Y.), the Key Research Program of Frontier Sciences (QYZDB-SSW-SLH030, L.Y.) of the Chinese Academy of Sciences, Natural Science Foundation of Fujian Province (2020J06035, L.Y.), and Fujian Science & Technology Innovation Laboratory for Optoelectronic Information of China (2021ZR112, L.Y.) for funding.
Author information
Authors and Affiliations
Contributions
L.Y. conceived of the idea and directed the research. H.L. designed the protocols, performed the experiments, and analyzed the data. H.Y. conducted density functional theory calculations. M.Z. and Z.L. participated in organic synthesis. H.Z. contributed to polymer characterization. L.Y. wrote the manuscript. All authors discussed the results and revised the manuscript.
Corresponding author
Ethics declarations
Competing interests
A patent application (China Patent Application 2022109484438) was filed by L.Y., H.L., H.Y., M.Z., and H.Z. of Fujian Institute of the Research on the Structure of Matter on photoswitchable compounds and associated reactivity described in this work. L.Y., H.L., H.Y., M.Z., and H.Z. declare no other competing interests. Z.L. declares no competing interest.
Peer review
Peer review information
Nature Communications thanks the anonymous reviewers for their contribution to the peer review of this work. A peer review file is available.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Lu, H., Ye, H., Zhang, M. et al. Photoswitchable dynamic conjugate addition-elimination reactions as a tool for light-mediated click and clip chemistry. Nat Commun 14, 4015 (2023). https://doi.org/10.1038/s41467-023-39669-x
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-023-39669-x
- Springer Nature Limited
This article is cited by
-
An electrochemically responsive B–O dynamic bond to switch photoluminescence of boron-nitrogen-doped polyaromatics
Nature Communications (2024)