Abstract
Colloidal gels are widely applied in industry due to their rheological character—no flow takes place below the yield stress. Such property enables gels to maintain uniform distribution in practical formulations; otherwise, solid components may quickly sediment without the support of gel matrix. Compared with pure gels of sticky colloids, therefore, the composites of gel and non-sticky inclusions are more commonly encountered in reality. Through numerical simulations, we investigate the gelation process in such binary composites. We find that the non-sticky particles not only confine gelation in the form of an effective volume fraction, but also introduce another lengthscale that competes with the size of growing clusters in gel. The ratio of two key lengthscales in general controls the two effects. Using different gel models, we verify such a scenario within a wide range of parameter space, suggesting a potential universality in all classes of colloidal composites.
Similar content being viewed by others
INTRODUCTION
Sticky colloidal particles diffuse and aggregate into clusters until forming a ramified, space-spanning network, i.e., colloidal gel1,2. Due to the load-bearing structure, colloidal gels behave as soft solids with finite yield stress beyond which flow occurs3,4. This rheological signature enables gels to be widely applied in industry, ranging from foodstuffs and personal care products to pharmaceutics and biotechnology5,6,7. Through experiments and simulations, particulate gels of monodisperse attractive (i.e., single-component) colloids have been extensively studied in various aspects (e.g., structure2, dynamics5, and rheology8), while theories have been proposed to approach a priori prediction (such as ref. 9). By contrast, realistic gel-like materials, which usually contain multiple components, remain less probed. This is partially due to the lack of proper model systems in experiments, while the intrinsic complication of polydispersity also limits the progress in fundamental understanding. While recent attention on composite systems increases10,11,12,13,14,15, most studies still remain on the phenomenological level of ac hoc models.
Among the diverse array of multi-component systems, the combination of gel matrix and solid fillers is prototypical in practical applications. For example, polymeric nanocomposites have remarkable mechanical properties and are ubiquitous in sensors, civil engineering, and microbial applications16. Progress has been made in understanding such composites, which, in the absence of strong filler–matrix interactions, can be described by conventional continuum mechanics17. Because of a large gap between the constituent sizes, empirical approaches (such as Krieger–Dougherty law) have been found to describe the basic behavior by assuming a continuum background18,19.
However, the continuum assumption no longer holds if the characteristic sizes of each component are comparable20. This is the case when replacing the polymer matrix in polymeric nanocomposites with a colloidal gel network, where the typical lengthscales are all micron-sized. The interplay between these lengthscales generates novelty. Though not yet fully understood, such biphasic mixtures receive increasing attention21,22, and recent work reports a unique flow-switched bistability23, which has never been observed in regular gels. These observations suggest the essential role of filler (or inclusion17) particles. While researchers have recently focused on the gelled state of these composites17,24, the inclusion effect on gelation dynamics is still unclear.
Using numerical simulations, we aim to shed light on the understanding of colloidal gelation with non-sticky particle fillers. The system we investigate is composed of sticky colloids, which can form a percolating gel network on their own, and non-sticky (NS) particles, which are hard spheres. As the latter stick neither to the gel colloids nor to themselves, they do not participate in gelation directly. Then the intuitive assumption seems to view NS particles as confinement to the gel part by compressing the available volume. Through extensive exploration of the parameter space, we show that the interplay between comparable lengthscales also plays a vital role and, in some cases, dominates over the confining effect and greatly impedes the gelation process. The ratio of two key lengthscales, i.e., the characteristic size of gel and the NS-particle spacing, offers a robust measure for such interplay, which controls the cluster growth during gelation. We verify this scenario over a wide range of compositions and particle sizes in different types of colloidal gel.
RESULTS
Colloidal gelation
A variety of attractions lead to colloidal gelation in nature, such as van der Waals forces, depletion forces, and hydrophobic interactions25. In this work, we investigate gelation under strong attractions (Uatt ≫ kBT) within a wide range of volume fractions (0.03 ≤ ϕ ≤ 0.3). We consider two representative contact models. The first model refers to typical attractions which drive particles to aggregate with only radial forces, as shown in Fig. 1a (blue). Such conservative attractions are characterized by pairwise potentials and mostly apply to smooth particles2 without tangential constraints, i.e., particles in contact can freely slide and rotate. By contrast, the second model constrains tangential pairwise motions (sliding, rolling, and twisting) with the presence of attraction, Fig. 1a (red). As suggested in ref. 26, we term the first contact as attraction (att) and the second model with tangential constraints as adhesion (adh).
The difference in contact interactions leads to different micromechanics, such as bending rigidity27 and isostaticity28. Based on the Maxwell criteria29, mechanical stability for frictionless particles in 3D requires an average contact number N ≥ Nc = 6. Following30, we consider the isostaticity condition as microstructural information in attractive and adhesive systems and determine gelation accordingly. In particular, we extract particles with N ≥ Nc and check their connectivity (see the “Methods” section), Fig. 1b. The gelation point determined by this method has been verified, in both experiments31 and simulations24, to agree well with that from macroscopic rheology. Therefore, we apply this gelation criterion throughout this work, with \({N}_{{{{{{{{\rm{c}}}}}}}}}^{{{{{{{{\rm{att}}}}}}}}}=6\) for attractive gels and \({N}_{{{{{{{{\rm{c}}}}}}}}}^{{{{{{{{\rm{adh}}}}}}}}}=2\) for adhesive gels28.
Our simulations start from a random, homogeneous configuration and evolve following Langevin dynamics for up to 104 times of Brownian time τB ≡ πηd3/2kBT (where η refers to fluid viscosity and d to colloid diameter). More simulation details can be found in the Methods section. For both gels, the time required for gelation tg decreases with the volume fraction ϕ in a power-law manner, Fig. 1c. Fitting of attractive gel data (blue) gives an exponent of −3.7, while that of adhesive gels (red) exhibits a lower exponent −2.1. Detailed fitting results are as follows:
At the same volume fraction ϕ, it takes adhesive colloids less time to gel than the attractive ones. The exponents roughly agree with the values in other literature32,33,34, justifying our gel simulations as well as the gelation criterion we used.
To capture the structural evolution during gelation, we measure the static structure factor S(q) for both attractive (ϕ = 0.1) and adhesive (ϕ = 0.05) gels, Fig. 1d. S(q) is originally flat due to the homogeneous randomization for the initial configuration. As time increases (indicated by arrows in Fig. 1d), a peak at intermediate wavenumber q appears, grows, and shifts to a lower q. Thus, a characteristic lengthscale ξ ≡ 2π/q0 (where q0 refers to the peak wavenumber) increases during gelation, plausibly representing the cluster growth. Note that the low-q peak is absent at ϕ = 0.5 (Supplementary Note 1), indicating a homogeneous attractive glass (AG) state. The gel-to-glass transition explains the slight deviation from the power-law scaling of tg, Fig. 1c (blue).
While the two systems exhibit similar S(q) evolutions, the fractal dimensions df inside clusters, which can be estimated from the slope of \(S(q) \sim {q}^{-{d}_{{{{{{{{\rm{f}}}}}}}}}}\), are different35. According to Fig. 1d (top), the clusters in attractive gel are rather compact (df ≈ 3) at short range, suggesting gelation via the typical arrested-phase-separation route2,25. As q decreases, the fractal dimension df drops to 2 (consistent with the value reported in ref. 7), indicating a relatively open structure at larger lengthscales. We attribute this to the emergent bending rigidity of bigger building blocks, e.g., tetrahedrons composed of attractive particles.
By contrast, the gel network in the adhesive gel is more open and ramified with a lower fractal dimension df ≈ 1.8, as expected by diffusion-limited cluster–cluster aggregation (DLCA)25. Since the clusters in adhesive gels are looser than those in attractive gels, it is easier for adhesive colloids to percolate at the same volume fraction ϕ, i.e., lower gelation time tg. The above results show that the two models we used lead to two different types of colloidal gels.
Gelation with NS particles
In the presence of NS particles, sticky colloids can still diffuse and aggregate into a percolating gel network, such as Fig. 2a. Analogous to colloidal gels where ϕ directly controls gelation, the gelation in binary systems depends on the volume fractions of gel colloids ϕg and NS particles ϕNS. Since NS particles do not directly participate in the formation of gel network, we expect them to geometrically confine gelation and compress the free volume Vfree for sticky colloids. The reduction in Vfree then leads to an effective increase in the colloidal volume fraction. If simply consider Vfree by subtracting the NS particle volume VNS from the total volume Vtot, we can then define an effective volume fraction ϕeff for gel colloids as below:
Though the definition above neglects the exclusion shell around NS particles36, it has been verified to well capture the gelation diagram with varying attractions24. This is probably because as clusters grow and become increasingly large and porous, the cluster–NS interpenetration37 invalidates the application of exclusion shell.
We first focus on the case of large NS particles with dNS = 8d, where dNS and d refer to the sizes of NS particles and gel colloids, respectively. According to Fig. 1b and Eq. (3), the addition of NS particles is expected to decrease the gelation time tg. For both models at high ϕg (ϕg ≥ 0.15 for attractive systems and ϕg ≥ 0.07 for adhesive systems), tg decreases with the volume fraction of NS-particles ϕNS monotonically, Fig. 2b. Plotting tg versus ϕeff collapses these high-ϕg data on a master curve, Fig. 2c, which converges with the gel data we have shown in Fig. 1c. In this way, regardless of contact models, the effective volume fraction ϕeff seems to well characterize the gelation time tg of sticky-NS composites.
At low ϕg, nevertheless, the decrease in tg becomes progressively slow as ϕNS increases. In particular, for attractive systems at ϕg = 0.07, the gelation time tg even increases with the addition of NS particles at high ϕNS and becomes higher than that of the pure gel, Fig. 2b (top). This conflicts with our expectation of increasing ϕeff. Furthermore, plotting tg versus ϕeff shows deviation from the master curve, Fig. 2c. While the data collapse at high ϕg justifies the definition of ϕeff, this inconsistency indicates another physics, manifesting at low ϕg, that delays the gelation with NS particles.
Lengthscale interplay and diagrams
As previously mentioned, one notable feature of gel–particle composites is the comparable lengthscales. Here we identify two key lengthscales from each constituent and attribute the abnormal deviation from ϕeff prediction (Fig. 2c) to their interplay. The first lengthscale is the characteristic size ξ of the gel structure derived from structure factor S(q), which evolves over time (Fig. 1c). Since our focus is the gelation time tg, we measure the structure factor S(q) at t = tg (Supplementary Note 2) and extract a time-independent lengthscale \({\xi }_{{{{{{{{\rm{g}}}}}}}}}\equiv \xi ({t}_{{{{{{{{\rm{g}}}}}}}}})\). Such lengthscale in general represents the correlation length at gelation point, Fig. 3a (inset).
For both attractive and adhesive gels, ξg decreases with volume fraction ϕ, Fig. 3a. Namely, the more concentrated a system is, the smaller clusters it requires to assemble into a percolating network. This is consistent with the gelation at the DLCA limit38. Power-law fittings on the two sets of data give similar exponents, while the lengthscale in adhesive gels \({\xi }_{{{{{{{{\rm{g}}}}}}}}}^{{{{{{{{\rm{adh}}}}}}}}}\) is slightly lower than that in attractive gels \({\xi }_{{{{{{{{\rm{g}}}}}}}}}^{{{{{{{{\rm{att}}}}}}}}}\) at the same ϕ. Fitting results are as below:
Note that the above ξg refers to the lengthscale in pure colloidal gels and ϕ to the colloid volume fraction. In binary systems, the large NS particles can easily distort the large-scale structure so that the colloid–colloid structure factor S(q) barely exhibits a resolvable peak at low q (Supplementary Fig. 3a). We, therefore, assume that the ϕeff scenario also applies to the ξg scaling, by simply replacing ϕ with ϕeff in Eqs. (4) and (5). That is, we use ξg in an equivalent pure gel as a proxy for that in a binary composite. By comparing the void distribution39 in pure gels and composites, we justify such assumption in Supplementary Note 3.
Apart from geometric confinement, NS particles also generate a flexible porous medium40, in which colloids diffuse and aggregate into a gel network. Such medium is in general characterized by the pore size20. Here we use the spacing between NS particles δ to represent the porosity, Fig. 3b (inset). In particular, we simulate a collection of only NS particles at different volume fractions ϕNS and measure the average interstice δ from Voronoi cell volume (the Methods section). In the unit of dNS, the average spacing δ, diverging at ϕNS = 0, decreases with ϕNS as shown in Fig. 3b. Though we measure δ in pure NS-particles systems, such quantity in binary mixtures remains almost unchanged at the same ϕNS (see gray and black scatters in Fig. 3b). Moreover, as gelation proceeds, δ barely varies over time (Supplementary Fig. 5). Thus, δ is time-independent and scales with NS particles’ absolute, rather than relative, volume fraction.
Given other parameters in a binary system fixed, both ξg and δ can be a priori determined by ϕeff and ϕNS, respectively. Then their ratio γ ≡ ξg/δ varies as a function of ϕg, ϕNS, and dNS/d. Since the ξg-scaling is different in the attractive and adhesive gels, as shown in Eqs. (4) and (5), the lengthscale ratio γ also depends on the specific contact model.
We find that the tg deviation from the master curve (Fig. 2c) correlates with γ. To quantify the degree of deviation, we use the distance between the average of measured tg and the predicted \({t}_{{{{{{\rm{g}}}}}}}^{{{{{{\rm{fit}}}}}}}\) from power-law fitting, defined as follows:
where \({t}_{{{{{{\rm{g}}}}}}}^{{{{{{\rm{fit}}}}}}}\) refers to the gelation time calculated by Eq. (1) or (2) but using ϕeff instead of ϕ. With all the data shown in Fig. 2c, we map out the ϕg–ϕNS diagrams for both gel models at dNS = 8d, Fig. 3c. The quantified deviation dev[tg] is represented by the colormap.
For attractive systems, while most data show small dev[tg], we observe two regions that present visible deviations in the diagram, Fig. 3c (left). At high ϕg and ϕNS, the effective volume fraction ϕeff is so high that the system falls in the AG regime with ϕeff > 0.4 (gray). This is consistent with the deviation at high ϕeff in Fig. 2c, where the measured tg falls below the power-law fitting (blue dashed line).
Significant deviation also occurs at low ϕg and high ϕNS (upper left corner of the diagram). By drawing the iso-γ lines, we find that higher γ leads to more prominent deviation dev[tg]. Namely, when the characteristic size in gel ξg far exceeds the spacing δ between NS particles, gelation is greatly hindered by their interplay, which dominates over the effect of ϕeff.
We use the same method to calculate the ratio γ as well as the deviation dev[tg] in adhesive systems and find that this scenario appears to still work, Fig. 3c (right). As the lengthscale ratio γ increases, the deviation becomes significant at low ϕg and high ϕNS. For both systems, visually, the iso-γ line of γ = 2 demarcates the regions with low and high deviations. This result supports our argument that, as an important factor, the lengthscale interplay primarily affects the gelation process in binary systems at high γ.
The role of lengthscale ratio γ is further verified by varying dNS from d to 12d in both gel models, Fig. 3d, e. At the same composition, the lengthscale ratio γ decreases with the NS particle size dNS. For larger NS particles of dNS = 12d, therefore, most data points fall on the master curve when plotting tg versus ϕeff (Supplementary Fig. 6), and tg deviation is greatly suppressed due to the small γ. As dNS decreases, deviation becomes increasingly significant. When the colloids and NS particles have comparable sizes (i.e., dNS = d), almost all data points deviate from the master curve (Supplementary Fig. 6). Raw data of diagrams in Fig. 3d, e can be found in Supplementary Note 5.
Remarkably, the iso-γ line at γ = 2 demarcates the low- and high-deviation regions in all cases, Fig. 3c–e. The positive correlation between deviation and lengthscale ratio γ is obvious when plotting all the data together, Fig. 3f.
Regardless of the interaction (attractive or adhesive), composition (ϕg and ϕNS), and particle size ratio dNS/d, the lengthscale ratio γ, as well as the effective volume fraction ϕeff, seems to characterize the gelation process in binary mixtures well.
Growth of the largest cluster
The deviation from ϕeff scenario indicates an additional hindering effect at high γ. Such hindering results from the frustration of cluster growth. In particular, we examine the evolutions of particle fraction in the largest cluster Nlc/N. For each contact model, we compare systems with different compositions and dNS but the same ϕeff (ϕeff = 0.2 for attraction and ϕeff = 0.1 for adhesion), Fig. 4. The value of lengthscale ratio γ is represented by the color. Compared with the pure gel at ϕ = ϕeff (black), binary systems with small γ exhibit similar growth, while those with large γ show a delayed increase in Nlc/N. Interestingly, the cluster morphology appears to be barely affected by NS particles regardless of γ (Supplementary Note 6). These results explicitly show how the lengthscale interplay, represented by the unified parameter γ, affects colloidal gelation with NS particles.
Behavior of NS particles
While colloids aggregate into a porous network as gelation proceeds, the dynamics of NS particles varies from system to system. At dilute ϕg and small dNS, we expect NS particles to be able to diffuse even upon gelation since the pore size of the gel matrix is much larger than the NS particles. As the size of pores shrinks, the NS diffusion starts to be confined until finally ‘locked’ in the matrix cage as soon as a gel network is formed.
To probe the effect of ϕg, ϕNS, and dNS on NS dynamics, we measure the mean squared displacement (MSD) in various composite samples. For ease of comparison between colloids and NS, we normalize MSD by diffusion coefficient Ddiff for each species of the particles. We find that increasing ϕg and dNS both lead to the dynamical arrest of NS, which seems to occur simultaneously with that of colloids, Fig. 5a (left and middle). This may correspond to the case where NS size exceeds the pore size of the gel matrix, which decreases with ϕg as in Supplementary Fig. 4. We also notice that increasing ϕNS slows down the NS dynamics, Fig. 5a (right), probably due to the increasingly crowding surroundings41.
Through radial distribution function (RDF), we also study the configuration of NS particles in binary composites. Without loss of generality, we use a specific composition of ϕg = 0.1 and ϕNS = 0.3 with four different dNS. While a small peak appears at the second-nearest neighbor for small dNS = d and 3d, such subtle spatial correlation does not present for larger dNS, Fig. 5b. We do not identify any sign of crystallization for all cases, and there is little variation in RDF before and after gelation. These results imply that the depletion effect42,43 (and the consequent Casimir-like attraction44) between NS particles is neglectable.
DISCUSSION
To better illustrate the effect of NS particles, here we consider two limits, Fig. 6. For infinitely-large NS particles (dNS → ∞), the colloids behave as a continuum which is geometrically confined between solid-wall boundaries, i.e., the surfaces of NS particles. Within the colloidal phase, the real volume fraction is ϕeff rather than ϕg, and the diffusion, as well as aggregation, is purely mediated by the background solvent of viscosity ηf. As the gelation time is proportional to the Brownian time τB, we expect the scaling to be \({t}_{{{{{{{{\rm{g}}}}}}}}} \sim {\eta }_{{{{{{{{\rm{f}}}}}}}}}{({\phi }_{{{{{{{{\rm{eff}}}}}}}}})}^{\alpha }\), where α refers to an interaction-dependent exponent.
At another limit with dNS → 0, the NS particles form a continuum background in which sticky colloids are distributed, Fig. 6 (right). In such a case, confinement for colloids is absent so that the gelation time scales with the absolute volume fraction ϕg rather than the effective one ϕeff. The continuum background is essentially a hard-sphere suspension, whose viscosity ηNS increases with the volume fraction of NS particles45. Though such suspension is not a simple Newtonian fluid of viscosity ηNS in general, we may expect so because the situation is close to equilibrium46. In this sense, the gelation time then has the form \({t}_{{{{{{{{\rm{g}}}}}}}}} \sim {\eta }_{{{{{{{{\rm{NS}}}}}}}}}{({\phi }_{{{{{{{{\rm{g}}}}}}}}})}^{\alpha }\). For the smallest dNS = d we investigate, the background viscosity ηNS increases with ϕNS roughly in a Krieger–Dougherty manner47 (Supplementary Note 7).
The above arguments can be generalized by using an effective background viscosity ηeff and an effective colloidal volume fraction \({\phi }_{{{{{{{{\rm{eff}}}}}}}}}^{{{{{{{{\rm{g}}}}}}}}}\) (differing from ϕeff in Eq. (3)) as follows:
The values of ηeff and \({\phi }_{{{{{{{{\rm{eff}}}}}}}}}^{{{{{{{{\rm{g}}}}}}}}}\) at the two limits are shown in Fig. 6. The collapsed gelation time tg in systems of dNS = 12d validates ϕeff at large NS particles. For binary systems with dNS = d and the same ϕg = 0.1, the identical structure factor S(q) (Supplementary Fig. 3) and void distribution (Supplementary Fig. 4) suggest that the effective volume fraction \({\phi }_{{{{{{{{\rm{eff}}}}}}}}}^{{{{{{{{\rm{g}}}}}}}}}\) reduces to ϕg at small dNS. Though this conflicts with the previous assumption (ξg–ϕeff scaling), using ϕg instead of ϕeff seems to make little difference in the iso-γ line (Supplementary Note 3).
As dNS decreases from infinity to zero, therefore, we expect transitions in both ηeff (from ηf to ηNS) and \({\phi }_{{{{{{{{\rm{eff}}}}}}}}}^{{{{{{{{\rm{g}}}}}}}}}\) (from ϕeff to ϕg). At intermediate dNS, the interpenetration between NS particles and ramified clusters, which weakens the confinement effect and thereby decreases the effective volume fraction \({\phi }_{{{{{{{{\rm{eff}}}}}}}}}^{{{{{{{{\rm{g}}}}}}}}}\), becomes possible. Meanwhile, the further aggregation of colloidal clusters with size comparable to the NS spacing (γ\(\sim\)1) requires the rearrangement of NS particles, which turns on the transition in background viscosity from ηf to ηNS. In particular, pinning NS particles during gelation leads to diverging gelation time tg beyond γ = 2 (Supplementary Note 8). In this way, the tg deviation occurs as a result of both the decrease in effective volume fraction \({\phi }_{{{{{{{{\rm{eff}}}}}}}}}^{{{{{{{{\rm{g}}}}}}}}}\) and the increase of background viscosity ηeff.
While the above discussion merely considers dNS, the lengthscale ratio γ, including ϕg, ϕNS, and dNS, offers a generic, unified measure in all binary composites. The lengthscale competition then essentially represents a mechanism transition between the two limit cases as shown in Fig. 6. While using global quantities in the expression of γ, we note that local details may also play a secondary role. For example, the lengthscale ratio γ assumes uniform sizes for clusters and NS spacing, which, in practice, both have size distributions (Supplementary Note 4) and irregular morphologies (such as porosity and tortuosity40,48). Meanwhile, as binary systems involve different interactions, the coupling of localized glassy dynamics may also interfere with the formation of gel network49. These factors, as well as the others not listed, may more or less affect the gelation process and cannot be fully captured by a sole quantity γ. This is consistent with the scattering of data points in Fig. 3f.
In summary, we use Langevin dynamics simulations to investigate colloidal gelation with non-sticky particulate fillers. Through extensive exploration in the parameter space, we find that the interplay between two lengthscales (ξg and δ), represented by their ratio γ, matters in composite gelation. At γ < 2, the NS particles act as geometric confinement and effectively increase the colloidal concentration in the form of ϕeff. As γ increases, gelation is progressively hindered as a result of both the decrease in effective concentration and the increasingly-viscous background. Our results not only shed light on industrial formulation and processing, but also open up a new scheme for the tunability in practical gel materials. Though precise prediction is still challenging due to the missing of microscopic details, we successfully capture the generic importance of lengthscale competition in multi-component systems. Our finding will inspire the fundamental understanding and may lead to the efficient development of colloidal composite materials.
METHODS
Simulations
We perform Langevin dynamics simulations on LAMMPS50. Under thermostat at kBT, our system contains two species of spherical particles which differ in size and interaction. The first species consists of sticky particles with an average diameter d (bidispersed with 0.87d and 1.13d to prevent crystallization), while the second species consists of elastic spheres of diameter dNS. To ensure that both colloids and NS particles are diffusive within the relevant time range for the gelation process (≳0.1τB), we set the particle mass proportional to the particle size with the constant damping time m/3πηd ≪ τB (see Supplementary Note 9 for the details). The NS–NS and NS–g interactions are simple elastic repulsions when overlapped, modeled by a modified Hertzian model with a high modulus Ed3 ≫ kBT. To capture the interaction between sticky colloids, we use the Derjaguin–Muller–Toporov (DMT) contact model51 with a sufficiently strong attraction Uatt = 20kBT. With the same modulus E, the overlap caused by cohesion is small (≈0.01d) at force balance, ensuring short-range attraction. Tangential constraints on sliding, rolling, and twisting (Fig. 1a) are all modeled in a modified Coulomb manner with the same spring constant and friction coefficient μ. Respectively, we set μ = 0 for attraction without constraints and μ = 1 for adhesion with constraints on all three motions.
Our simulation occurs in a cubic box of side length L = 50d with periodic boundaries, which is sufficiently large for bulk condition (Supplementary Fig. 10). In the absence of colloid–colloid attraction, an initial configuration is generated through multiple relaxations. We first randomize NS particles and wait for them to relax for 100τB, and then relax randomly-distributed, non-attractive colloids with pinned NS particles for another 100τB. Upon equilibrium, we unpin NS particles and allow the bulk system to relax shortly for 10τB. The initial state generated by such a pre-relaxing protocol exhibits no overlapping and no visible aggregation caused by depletion forces. We find little dependence on the pre-relaxing duration (Supplementary Fig. 11), suggesting the robustness of our results.
Starting from a homogeneous random configuration, each system evolves up to 104τB. We run each simulation for at least three times, with the data points and error bars shown in this work representing the average and standard deviation, respectively. Visualization and part of data analysis are carried out using OVITO52.
Determining gelation time
A robust criterion for gelation is crucial to accurately determine the gelation time tg. The experimental convention views the liquid-to-solid transition, typically characterized by oscillatory rheology53, as the gelation point. Inspired by the Maxwell criteria for stability29, recent work, including both simulation24 and experiment31, correlates the evolution of clusters of isostatic particles (contact number N ≥ Nc) with colloidal gelation and confirms the validity of such structural indicator by comparison with macroscopic rheology.
In this work, we define the gelation time tg as the time required for the isostaticity percolation. As Fig. 1b shows, we first extract all isostatic particles with N ≥ Nc (Table. 1 in ref. 28) and then examine their connectivity. Gelation is determined if there exist clusters percolating through periodic boundaries in all three directions (x, y, and z). Recent work correlates rigidity percolation with gelation boundary54. For adhesive systems, our method (isostatic percolation with \({N}_{{{{{{{{\rm{c}}}}}}}}}^{{{{{{{{\rm{adh}}}}}}}}}=2\)) gives the same result as rigidity percolation, since each pair constitutes a minimal rigid cluster. Yet this may not hold for attractive contacts with no tangential constraints, where 3D rigidity analysis is challenging31 (and beyond the scope of this work). Therefore, we consistently apply the isostaticity method for attractive systems with \({N}_{{{{{{{{\rm{c}}}}}}}}}^{{{{{{{{\rm{att}}}}}}}}}=6\).
Voronoi analysis and NS-particle spacing
To measure the average spacing between NS particles δ, we perform simulations of only NS particles at different volume fractions ϕNS. Upon Brownian relaxation, Voronoi analysis is performed, and the spacing between each pair of particles δi is estimated as follows:
where Vcell, i refers to the volume of the Voronoi cell of the i-th particle. Here we assume isotropic distribution and regard each Voronoi polyhedron as an equivalent sphere. Then the average spacing δ = 〈δi〉. The distribution of δi can be found in Supplementary Fig. 5.
Data availability
The data generated in this study are provided in the Supplementary Information/Source Data file. Source data are provided with this paper.
Code availability
The codes of the computer simulations are available from the corresponding authors upon reasonable request.
References
Lekkerkerker, H. N. W., Poon, W. C.-K., Pusey, P. N., Stroobants, A. & Warren, P. B. Phase behaviour of colloid + polymer mixtures. Europhys. Lett. 20, 559 (1992).
Poon, W. C. K., Pirie, A. D. & Pusey, P. N. Gelation in colloid-polymer mixtures. Faraday Discuss. 101, 65–76 (1995).
Bonn, D. & Denn, M. M. Yield stress fluids slowly yield to analysis. Science 324, 1401–1402 (2009).
Bonn, D., Denn, M. M., Berthier, L., Divoux, T. & Manneville, S. Yield stress materials in soft condensed matter. Rev. Mod. Phys. 89, 035005 (2017).
Joshi, Y. M. Dynamics of colloidal glasses and gels. Annu. Rev. Chem. Biomol. Eng. 5, 181–202 (2014).
Harich, R. et al. Gravitational collapse of depletion-induced colloidal gels. Soft Matter 12, 4300–4308 (2016).
Rouwhorst, J., Ness, C., Stoyanov, S., Zaccone, A. & Schall, P. Nonequilibrium continuous phase transition in colloidal gelation with short-range attraction. Nat. Commun. 11, 3558 (2020).
Laurati, M., Egelhaaf, S. U. & Petekidis, G. Nonlinear rheology of colloidal gels with intermediate volume fraction. J. Rheol. 55, 673–706 (2011).
Cates, M. E., Fuchs, M., Kroy, K., Poon, W. C. K. & Puertas, A. M. Theory and simulation of gelation, arrest and yielding in attracting colloids. J. Phys. Condens. Matter 16, S4861 (2004).
Ferreiro-Córdova, C., Del Gado, E., Foffi, G. & Bouzid, M. Multi-component colloidal gels: interplay between structure and mechanical properties. Soft Matter 16, 4414–4421 (2020).
Jia, D., Hollingsworth, J. V., Zhou, Z., Cheng, H. & Han, C. C. Coupling of gelation and glass transition in a biphasic colloidal mixture-from gel-to-defective gel-to-glass. Soft Matter 11, 8818–8826 (2015).
Daneshfar, Z., Goharpey, F. & Foudazi, R. Depletion-induced interaction in concentrated bimodal suspensions of nanosilica in poly(ethylene glycol). Rheol. Acta 58, 97–107 (2019).
Sikorski, M., Sandy, A. R. & Narayanan, S. Depletion-induced structure and dynamics in bimodal colloidal suspensions. Phys. Rev. Lett. 106, 188301 (2011).
Chang, C. & Powell, R. L. Effect of particle size distributions on the rheology of concentrated bimodal suspensions. J. Rheol. 38, 85–98 (1994).
Jamali, S., Yamanoi, M. & Maia, J. Bridging the gap between microstructure and macroscopic behavior of monodisperse and bimodal colloidal suspensions. Soft Matter 9, 1506–1515 (2013).
Muhammed Shameem, M., Sasikanth, S., Annamalai, R. & Ganapathi Raman, R. A brief review on polymer nanocomposites and its applications. Mater. Today: Proc. 45, 2536–2539 (2021).
Ferreiro-Córdova, C. et al. Stiffening colloidal gels by solid inclusions. Soft Matter 18, 2842–2850 (2022).
Mahaut, F., Chateau, X., Coussot, P. & Ovarlez, G. Yield stress and elastic modulus of suspensions of noncolloidal particles in yield stress fluids. J. Rheol. 52, 287–313 (2008).
Vu, T.-S., Ovarlez, G. & Chateau, X. Macroscopic behavior of bidisperse suspensions of noncolloidal particles in yield stress fluids. J. Rheol. 54, 815–833 (2010).
Sorichetti, V., Hugouvieux, V. & Kob, W. Structure and dynamics of a polymer-nanoparticle composite: effect of nanoparticle size and volume fraction. Macromolecules 51, 5375–5391 (2018).
Mohraz, A., Weeks, E. R. & Lewis, J. A. Structure and dynamics of biphasic colloidal mixtures. Phys. Rev. E 77, 060403 (2008).
Harden, J. L. et al. Enhanced gel formation in binary mixtures of nanocolloids with short-range attraction. J. Chem. Phys. 148, 044902 (2018).
Jiang, Y., Makino, S., Royer, J. R. & Poon, W. C. K. Flow-switched bistability in a colloidal gel with non-brownian grains. Phys. Rev. Lett. 128, 248002 (2022).
Li, Y., Royer, J. R., Sun, J. & Ness, C. Impact of granular inclusions on the phase behavior of colloidal gels. Soft Matter 19, 1342–1347 (2023).
Zaccarelli, E. Colloidal gels: equilibrium and non-equilibrium routes. J. Phys. Condens. Matter 19, 323101 (2007).
Richards, J. A. et al. The role of friction in the yielding of adhesive non-Brownian suspensions. J. Rheol. 64, 405–412 (2020).
Pantina, J. P. & Furst, E. M. Elasticity and critical bending moment of model colloidal aggregates. Phys. Rev. Lett. 94, 138301 (2005).
Santos, A. P. et al. Granular packings with sliding, rolling, and twisting friction. Phys. Rev. E 102, 032903 (2020).
Maxwell, J. C. On the calculation of the equilibrium and stiffness of frames. Lond. Edinb. Dublin Philos. Mag. 27, 294–299 (1864).
Liu, W., Jin, Y., Chen, S., Makse, H. A. & Li, S. Equation of state for random sphere packings with arbitrary adhesion and friction. Soft Matter 13, 421–427 (2017).
Tsurusawa, H., Leocmach, M., Russo, J. & Tanaka, H. Direct link between mechanical stability in gels and percolation of isostatic particles. Sci. Adv. 5, eaav6090 (2019).
Zaccone, A., Crassous, J. J. & Ballauff, M. Colloidal gelation with variable attraction energy. J. Chem. Phys. 138, 104908 (2013).
Trompette, J. & Meireles, M. Ion-specific effect on the gelation kinetics of concentrated colloidal silica suspensions. J. Colloid Interface Sci. 263, 522–527 (2003).
Innocenzi, P. Measuring the Sol-to-Gel Transition, 51–61 (Springer International Publishing, 2016).
Lattuada, M., Wu, H., Hasmy, A. & Morbidelli, M. Estimation of fractal dimension in colloidal gels. Langmuir 19, 6312–6316 (2003).
Oversteegen, S. M. & Roth, R. General methods for free-volume theory. J. Chem. Phys. 122, 214502 (2005).
Dagès, N. et al. Interpenetration of fractal clusters drives elasticity in colloidal gels formed upon flow cessation. Soft Matter 18, 6645–6659 (2022).
Poon, W. & Haw, M. Mesoscopic structure formation in colloidal aggregation and gelation. Adv. Colloid Interface Sci. 73, 71–126 (1997).
Koumakis, N. et al. Tuning colloidal gels by shear. Soft Matter 11, 4640–4648 (2015).
Peppin, S. S. L. Theory of tracer diffusion in concentrated hard-sphere suspensions. J. Fluid Mech. 870, 1105–1126 (2019).
Brady, J. F. The long-time self-diffusivity in concentrated colloidal dispersions. J. Fluid Mech. 272, 109–134 (1994).
Royall, C. P., Louis, A. A. & Tanaka, H. Measuring colloidal interactions with confocal microscopy. J. Chem. Phys. 127, 044507 (2007).
Roth, R., Evans, R. & Dietrich, S. Depletion potential in hard-sphere mixtures: Theory and applications. Phys. Rev. E 62, 5360–5377 (2000).
Gnan, N., Zaccarelli, E. & Sciortino, F. Casimir-like forces at the percolation transition. Nat. Commun. 5, 3267 (2014).
Mewis, J. & Wagner, N. J. Colloidal Suspension Rheology. Cambridge Series in Chemical Engineering (Cambridge University Press, 2011).
Mari, R., Seto, R., Morris, J. F. & Denn, M. M. Shear thickening, frictionless and frictional rheologies in non-brownian suspensions. J. Rheol. 58, 1693–1724 (2014).
Krieger, I. M. & Dougherty, T. J. A mechanism for non newtonian flow in suspensions of rigid spheres. Trans. Soc. Rheol. 3, 137–152 (1959).
Gelb, L. D., Graham, A. L., Mertz, A. M. & Koenig, P. H. On the permeability of colloidal gels. Phys. Fluids 31, 021210 (2019).
Pham, K. N. et al. Multiple glassy states in a simple model system. Science 296, 104–106 (2002).
Thompson, A. P. et al. Lammps - a flexible simulation tool for particle-based materials modeling at the atomic, meso, and continuum scales. Comput. Phys. Commun. 271, 108171 (2022).
Derjaguin, B., Muller, V. & Toporov, Y. Effect of contact deformations on the adhesion of particles. J. Colloid Interface Sci. 53, 314–326 (1975).
Stukowski, A. Visualization and analysis of atomistic simulation data with ovito-the open visualization tool. Model. Simul. Mater. Sci. Eng. 18, 015012 (2009).
Ishida, H. & Agag, T. Handbook of Benzoxazine Resins (Elsevier, 2011).
Zhang, S. et al. Correlated rigidity percolation and colloidal gels. Phys. Rev. Lett. 123, 058001 (2019).
Acknowledgements
R.S. acknowledge funding from Wenzhou Institute, University of Chinese Academy of Sciences (WIUCASQD2020002) and National Natural Science Foundation of China (12174390, 12150610463). Y.J. acknowledge funding from China Postdoctoral Science Foundation (2022M723114). We thank PostDoctoral Association (PDA) and Journal Club (JC) in Wenzhou Institute for fruitful discussions.
Author information
Authors and Affiliations
Contributions
Y.J. conceived the research and carried out the simulation. Y.J. and R.S. analyzed the data and wrote the manuscript.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing interests.
Peer review
Peer review information
Nature Communications thanks Mehdi Bouzid, Mathieu Leocmach and the other, anonymous, reviewer for their contribution to the peer review of this work. A peer review file is available.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Source data
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Jiang, Y., Seto, R. Colloidal gelation with non-sticky particles. Nat Commun 14, 2773 (2023). https://doi.org/10.1038/s41467-023-38461-1
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-023-38461-1
- Springer Nature Limited
This article is cited by
-
Origins of complexity in the rheology of Soft Earth suspensions
Nature Communications (2024)
-
Fractional rheology of colloidal hydrogels with cellulose nanofibers
Cellulose (2024)