Abstract
Hybrid magnonic systems are a newcomer for pursuing coherent information processing owing to their rich quantum engineering functionalities. One prototypical example is hybrid magnonics in antiferromagnets with an easy-plane anisotropy that resembles a quantum-mechanically mixed two-level spin system through the coupling of acoustic and optical magnons. Generally, the coupling between these orthogonal modes is forbidden due to their opposite parity. Here we show that the Dzyaloshinskii–Moriya-Interaction (DMI), a chiral antisymmetric interaction that occurs in magnetic systems with low symmetry, can lift this restriction. We report that layered hybrid perovskite antiferromagnets with an interlayer DMI can lead to a strong intrinsic magnon-magnon coupling strength up to 0.24 GHz, which is four times greater than the dissipation rates of the acoustic/optical modes. Our work shows that the DMI in these hybrid antiferromagnets holds promise for leveraging magnon-magnon coupling by harnessing symmetry breaking in a highly tunable, solution-processable layered magnetic platform.
Similar content being viewed by others
Introduction
The Dzyaloshinskii–Moriya interaction (DMI) arises in magnetic materials as a consequence of broken inversion symmetry and spin-orbit coupling (SOC)1,2,3. As a unique rotational sense of spins, the DMI is the essential phenomenon responsible for non-collinear antiferromagnets (AFMs)4 and the formation of chiral spin textures, such as spin spirals5, skyrmions6, and homochiral Néel-type domain walls7 with outstanding potential to store, transport, and process magnetic information8,9. Beyond static magnetization, DMI phenomena has recently moved into the forefront of interest particularly in AFMs due to its ability to also govern and control magnetic dynamics, i.e., collective spin excitations (magnons)10,11. At zero field, AFMs with easy-plane type of magnetic anisotropy exhibit high-frequency optical magnons with even parity (under a twofold rotation) and low-frequency acoustic magnons with odd parity whose frequencies can be tuned by an external field12 (Fig. 1a). The DMI is known to play a critical role of modifying the ellipticity of the precessional motion of the sublattice magnetizations of acoustic magnons, resulting in a dramatic enhancement of the spin injection efficiency via spin-pumping13. However, the correlation between the DMI and the high-frequency optical magnons remains elusive due to uncommon sub-terahertz microwave frequencies required for conventional AFMs14,15,16. Identifying new magnetic materials with the exceptional DMI in a more accessible frequency range empowers investigations of its microscopic origin and enables topological objects with non-trivial static and dynamic spin textures that stimulate fast, low-powered energy-efficient hybrid magnonic applications for coherent information processing17,18.
a Schematic illustration of the acoustic and optical modes in a two-sublattice easy-plane antiferromagnet that are protected from interacting by parity. b A sketch of the inherently low symmetry of the Cu-EA structure due to octahedral tilting and the spin ordering of the layered antiferromagnet and its sublattice structure. c Magnetic properties of Cu-EA at T = 2.5 K. M(H) loops are obtained along all three principal axes of the single crystal up to saturation region. The upper inset shows the spin-flop transition at low field at \(\left|{{{{{{\bf{H}}}}}}}_{{{{{{\bf{ext}}}}}}}\right |=30\,{{{{{\rm{mT}}}}}}\). M vs. T is included in the lower inset to show the onset of magnetic ordering at the transition temperature, T ~ 10 K.
One such material class in this regard is the two-dimensional layered Cu-based magnetic hybrid organic–inorganic perovskites (HOIPs)19,20,21. Cu-based HOIPs consists of corner-sharing halogen, X = (Cl, Br) octahedra with the Cu atom situated at the center22. The strongly connected but tilted inorganic anion layers of corner-sharing CuX42- octahedra allow for a superexchange interaction via the Cu-X-Cu pathway (Figs. 1b, c), exhibiting magnetic ordering and multiferroic properties23,24. The naturally reduced symmetry in layered HOIPs25 provides an ideal platform for a three-site exchange with broken parity of the lattice that manifest the DMI1. Remarkably, the versatility of the organic cations offers a wide range of possibilities for synthetic control, e.g., interlayer spacer distance and inorganic-induced symmetry breaking distortions where a modulation of the weak interlayer AFM interaction or DMI can be achieved utilizing different sizes of organic cations. Incorporation of chiral organic cations will further break the symmetry and enable the chiral-induced-spin-selectivity (CISS) effect for promising spintronic applications26,27,28. The weak, synthetically tunable AFM interaction29 lowers both the frequencies of acoustic and optical magnons down to the easily accessible gigahertz frequency range30, making the study of rich synergistic effects between AFM magnons and the DMI feasible, opening up a broad field of physical phenomena.
Here we demonstrate that the presence of DMI, which acts as a symmetry breaking term in the Hamiltonian, in a layered AFM hybrid Cu-halide single crystal, (CH3CH2NH3)2CuCl4 (Cu-EA), enables hybridization between otherwise separate optical and acoustic modes and mimics a two-state character near the crossing point. In principle, due to symmetry protection, the two orthogonal magnon modes cannot interact and thus are present independently, allowing for a degeneracy to occur31. However, by breaking the symmetry under a twofold rotation induced by the DMI, these two modes couple, lifting the degeneracy and forming new hybrid states. This magnon–magnon coupling is identified by its typical signature which is an anticrossing gap occurring at the acoustic-optical crossing point. This coupling between the optical and acoustic magnons allows for the coherent transfer of spin information between these two quasi-particles32,33,34.
Results
Magnetic properties of Cu-EA, a well-known a-type antiferromagnet29 are obtained by characterizing the magnetic hysteresis loops at T = 2.5 K as shown in Fig. 1c. By applying the magnetic field along the a- and b-axis, the M-H curve roughly saturates near \(2{H}_{E} \sim 150{{{{{\rm{mT}}}}}}\) where \({H}_{E}\) is the interlayer antiferromagnetic exchange field. Along the c-axis, the saturation field is about 300 mT. The difference in the saturation field between the c-axis and the a-b plane represents planar magnetic anisotropy, probably caused by the shape anisotropy of the isolated magnetic CuCl42− layers separated by nonmagnetic (CH3CH2NH3+)2 spacers. At low external field (\({{{{{\rm{|}}}}}}{{{{{{\bf{H}}}}}}}_{{{{{{\bf{ext}}}}}}}{{{{{\rm{|}}}}}}\)~ 30 mT, top inset of Fig. 1c), a clear spin-flop transition at 30 mT is observed when the magnetic field is applied along the a-axis, suggesting a weak uniaxial magnetic anisotropy along this direction. Since the spin-flop transition occurs only at relatively low field, Cu-EA can be treated as an easy-plane antiferromagnet where the c-axis is the hard axis29,35. At high field above the spin-flop transition (\({{{{{\rm{|}}}}}}{{{{{{\bf{H}}}}}}}_{{{{{{\bf{ext}}}}}}}{{{{{\rm{|}}}}}}\) > 30 mT), the M-H curves are nearly identical along both the a- and b-axis. From the M-H curves, it has been calculated29,36 that the planar magnetic anisotropy field (~215 mT) is much larger than the weak uniaxial anisotropy field (~7 mT) which further confirms the dominant easy-plane behavior (see S.I section III). In the bottom inset of Fig. 1c, the magnetization as a function of temperature is recorded, showing the onset of magnetic ordering below T = 10 K.
Presence of the DMI in Cu-EA has been extensively characterized36,37. The Hamiltonian for the DMI can be written as \({{{{{{\mathcal{H}}}}}}}_{{{{{{{\mathrm{DMI}}}}}}}}=-{{{{{\bf{D}}}}}}\cdot ({\hat{{{{{{\bf{m}}}}}}}}_{{{{{{\bf{A}}}}}}}{{{{\times }}}}{\hat{{{{{{\bf{m}}}}}}}}_{{{{{{\bf{B}}}}}}})\) where \({\hat{{{{{{\bf{m}}}}}}}}_{{{{{{\bf{A}}}}}}}\) and \({\hat{{{{{{\bf{m}}}}}}}}_{{{{{{\bf{B}}}}}}}\) are the magnetization unit vectors of each layer, and \({{{{{\bf{D}}}}}}\) is the DMI vector, which prefers orthogonal alignment of each sublattice magnetization, or spin canting1. Because the space group is Pbca38, the DMI vector is constrained to lie along the a-axis that is parallel to the easy axis (S.I. section I). Therefore, at zero field no spin canting will occur, resulting in the absence of weak ferromagnetism (S.I. section II). Only above the spin-flop transition the weak ferromagnetism manifests by which the strength of the DMI vector (\(|{\mu }_{0}{{{{{\bf{D}}}}}}|\) ~ 11 mT) was determined using torque magnetometry and by studying the spin-flop transition36,37.
Frequency-field dependence of the optical and acoustic modes in Cu-EA is studied using magnetic resonance (Fig. 2a). Due to the opposite symmetry of the optical and acoustic modes, two different microwave pumping geometries are applied allowing for their selective excitation. In the transverse pumping geometry (\({H}_{\perp }\)), the microwave magnetic field, hrf should only be able to excite the acoustic mode. In the parallel pumping geometry (\({H}_{\parallel }\)), the in-plane component of hrf has even parity, exciting the optical mode, while the out-of-plane component of hrf can excite the acoustic mode, thus both modes can be observed30. To evaluate the effects of DMI on the magnon–magnon coupling, magnetic resonance is recorded with the field either parallel or perpendicular to \({{{{{\bf{D}}}}}}\), as shown in Fig. 2b. Figure 2c–f shows the measured frequency-field dependence of the antiferromagnetic resonance (AFMR) of Cu-EA in each of the experimental geometries described in Fig. 2a, b. In Fig. 2c, d, a dip in the acoustic mode frequency, as well as a discontinuity in the optical mode frequency is observed at 30 mT, which is an indication of the spin-flop transition39, consistent with the behavior of the MH loops for the magnetic field applied along the a-axis and parallel to the DMI vector. Additionally, the optical mode frequency for all four configurations reaches zero at 150 mT, consistent with the saturation field obtained from magnetometry and the assumption to treat Cu-EA as an easy-plane antiferromagnet. The ambient temperature during these measurements is \(T=2.5{{{{{\rm{K}}}}}}\), far below the transition temperature of 10 K. The temperature dependence of these modes approaching the magnetic transition is shown in S.I. Fig. S10.
a Schematic illustrations of the parallel and transverse pumping geometries for selectively exciting the optical and acoustic modes when the external magnetic field is applied parallel and perpendicular to the microwave RF field, \({{{{{{\bf{h}}}}}}}_{{{{{{\bf{rf}}}}}}}\). b Schematic illustrations of the broken symmetry (\({{{{{{\bf{H}}}}}}}_{{{{{{\bf{ext}}}}}}}\parallel {{{{{\bf{D}}}}}}\)) and symmetric (\({{{{{{\bf{H}}}}}}}_{{{{{{\bf{ext}}}}}}}\perp {{{{{\bf{D}}}}}}\)) pumping configurations when the external magnetic field is applied parallel and perpendicular to the DMI vector of the Cu-EA single crystal. c–f antiferromagnetic resonance spectra collected under the four possible experimental geometries as described in a and b. Insets in c–f show the resonance spectra under an adjusted color scale to elucidate the presence of dark modes at high fields.
Both the acoustic and optical modes of the AFM resonance are clearly resolved in the gigahertz frequency range due to the weak AFM interlayer coupling, similar to that of layered AFM CrCl330. Two features stand out: (i) A nonzero anticrossing gap, \({\triangle f}_{c}={{\min }}({f}_{\uparrow }-{f}_{\downarrow }) \sim 0.48\,{{{{{\rm{GHz}}}}}},\) forms between the two magnon modes, where \({f}_{\uparrow }\) and \({f}_{\downarrow }\) are the resonant frequencies of the upper and lower branches, respectively. A large \(\Delta {f}_{c}\) is observed even though there is no oblique magnetic field applied31 but only when \({{{{{{\bf{H}}}}}}}_{{{{{{\bf{ext}}}}}}}\parallel {{{{{\bf{D}}}}}}\), indicating that the two modes are directly coupled through the DMI; (ii) The optical mode, which decreases in frequency with increasing field below \({{{{{{\bf{|H}}}}}}}_{{{{{{\bf{ext}}}}}}}{{{{{\rm{|}}}}}}=2{H}_{E}\) continues above \(2{H}_{E}\) which is known to be a ‘dark’ mode40 and has even parity. Above \(2{H}_{E}\), this ‘dark’ optical mode increases frequency with increasing field. This mode is only observed when \({{{{{{\bf{H}}}}}}}_{{{{{{\bf{ext}}}}}}}\parallel {{{{{\bf{D}}}}}}\) as shown in the bottom right of Fig. 2c and d, where the color scale has been adjusted to highlight this weak response. It is noteworthy that the dark mode increases intensity in the transverse pumping geometry, indicating that it can interact with the odd parity microwave field. Both the nonzero anticrossing gap \({\triangle f}_{c}\) at 100 mT and the dark mode above \(2{H}_{E}\) are only observed when \({{{{{{\bf{H}}}}}}}_{{{{{{\bf{ext}}}}}}}\parallel {{{{{\bf{D}}}}}}\), confirming that the DMI plays the central role in breaking the symmetry that leads to these effects.
To further analyze the strength of the magnon–magnon coupling, angular-dependent measurements are performed as described in Fig. 3a. Considering that the in-plane uniaxial magnetic anisotropy may also introduce symmetry breaking41, here we aim to increase the coupling further by applying the magnetic field at \(45^\circ\) to the a-axis (S.I Fig. S7). Therefore, the resulting coupling arises from a combination of DMI and magnetic anisotropy. The magnon–magnon coupling strength, \({g}_{c}\) is determined as the half of the gap size between the optical and acoustic mode frequencies at their crossing point42,43,44 (i.e., \(\frac{{g}_{c}}{2{{{{{\rm{\pi }}}}}}}=\left|{\triangle f}_{c}/2\right|\)). We found that the coupling strength in Cu-EA reaches up to 0.27 GHz at T = 2.5 K, while the dissipation rates for the upper (\({\kappa }_{U}/2\pi\)) and lower (\({\kappa }_{L}/2\pi\)) branches given by the half widths at half maximum of the vertical cuts in the spectrum at the crossing point are roughly four times smaller than \({g}_{c}/2\pi\), satisfying the condition for a strong coupling: gc > κu and gc > κl43,45. This coupling strength of 0.27 GHz due to the combination of DMI and magnetic anisotropy is only slightly larger than that due to the DMI alone, which is 0.24 GHz. When the external magnetic field is rotated to a larger out-of-plane (OOP) angle \(\Theta\) (Fig. 3a), a symmetry breaking of the twofold rotation is further introduced in the sublattice magnetizations, enhancing the strength of the magnon–magnon coupling46. The magnitude of \({g}_{c}\) increases whereas \({\kappa }_{u}\) and \({\kappa }_{l}\) are largely independent of Θ, leading to a more pronounced coupling increasing from 0.27 GHz (Θ = 0°) to 0.64 GHz (Θ = 45°), consistent with previous observations indicating tunable magnon–magnon coupling47. We also verify that the anticrossing gap observed at Θ = 0° was not due to unintentional sample misalignment. A large cooperativity \(C={g}^{2}/({\kappa }_{u}{\kappa }_{l})\) is obtained and continuously increased from ~15 at Θ = 0° to ~160 at Θ = 45°, suggesting the coupling extends into the ultrastrong coupling regime which may be useful for simulating exotic quantum magnonics phenomena.
a Enhancement of the anticrossing gap by by rotating the external magnetic field by an oblique angle Θ along the out-of-plane direction at \(45^\circ\) to the in-plane principal a-axis as indicated. b \(\Theta\) dependence of the coupling strength \({g}_{c}\) and the dissipation rates for the upper and lower magnonic branches, \({\kappa }_{U}\) and \({\kappa }_{L}\) derived from the frequency-field dependence of resonance spectra presented in (c). The dotted red line is the fitted curve for the coupling strength following a quadratic behavior. The insets in (c) highlight the resonance spectra under an adjusted color scale, showing the increased DMI-induced nonzero gap, \({f}_{g}\) of the ‘dark’ mode as \(\Theta\) increases.
Remarkably, we notice a unique observation that the ‘dark’ optical mode does not reach zero frequency at |Hext|=2HE. An anomalous gap is formed (denoted by \({f}_{g}\)) although this gap is not related to the magnon coupling between the acoustic and optical modes. This gap size also increases with increasing Θ and reaches 2 GHz at Θ = 45°. As shown in S.I. section III.3, such a gap should not exist if the magnetic moments in adjacent sublattices are parallel at \({{{{{\rm{|}}}}}}{{{{{{\bf{H}}}}}}}_{{{{{{\bf{ext}}}}}}}{{{{{\rm{|}}}}}} > 2{H}_{E}\) and can be attributed to the residual spin canting that arises from the DMI. This residual spin canting at \({{{{{\rm{|}}}}}}{{{{{{\bf{H}}}}}}}_{{{{{{\bf{ext}}}}}}}{{{{{\rm{|}}}}}} > 2{H}_{E}\) is another typical signature of the DMI in Cu-EA which prevents a collinear alignment of the sublattice magnetizations, causing them to cant slightly due to their preferred orthogonal alignment (see discussion in S.I. section II).
Discussion
All the three unique features observed in the AFM resonance of Cu-EA single crystal, i.e., the formation of strong magnon–magnon coupling at Θ = 0°, the presence of even-parity ‘dark’ optical modes under the transverse excitation condition, and the anomalous gap at \(\left|{{{{{{\bf{H}}}}}}}_{{{{{{\bf{ext}}}}}}}\right |=2{H}_{E}\) can be attributed to the DMI in the Cu-EA crystal (S.I. section V). For the key observation about the strong magnon–magnon coupling and nonzero anticrossing gap at Θ = 0°, we performed analytical calculations by employing a set of coupled Landau-Lifshitz48 (LL) equations with a two-sublattice model and the DMI term. The Hamiltonian of the DMI term is written as \({{{{{{\mathcal{H}}}}}}}_{{{{{{{\mathrm{DMI}}}}}}}}=-{{{{{\bf{D}}}}}}\cdot \left({\hat{{{{{{\bf{m}}}}}}}}_{{{{{{\bf{A}}}}}}}\times {\hat{{{{{{\bf{m}}}}}}}}_{{{{{{\bf{B}}}}}}}\right)\) \(={\hat{{{{{{\bf{m}}}}}}}}_{{{{{{\bf{A}}}}}}}\cdot ({D}_{x}\left(\hat{{{{{{\bf{x}}}}}}}\times {\hat{{{{{{\bf{m}}}}}}}}_{{{{{{\bf{B}}}}}}}\right))+{\hat{{{{{{\bf{m}}}}}}}}_{{{{{{\bf{B}}}}}}}\cdot ({-D}_{x}\left(\hat{{{{{{\bf{x}}}}}}}\times {\hat{{{{{{\bf{m}}}}}}}}_{{{{{{\bf{A}}}}}}}\right))\), where \({D}_{x,y,z}\) are the components of the DMI vector that defines the direction of the inversion asymmetric exchange field, \({\hat{m}}_{A(B)}\) is the sublattice magnetic moment located on adjacent atomic sites A(B). The direction of D is determined to be along the a-axis which for mathematical purposes here we define it as the x-direction. When \({{{{{{\bf{H}}}}}}}_{{{{{{\bf{ext}}}}}}}\parallel {{{{{\bf{D}}}}}}\), each sublattice experiences an effective field that is antisymmetric under twofold rotation, allowing interactions between the two modes with opposite parity. By including this effective field into the coupled LL equations, we obtain:
where γ is the gyromagnetic ratio, \({M}_{s}\) is the saturation magnetization of the sublattice, and \({{{{{{\boldsymbol{\tau }}}}}}}_{{{{{{\bf{A}}}}}}}\) and \({{{{{{\boldsymbol{\tau }}}}}}}_{{{{{{\bf{B}}}}}}}\) are the torques induced by the microwave rf field. The terms in parenthesis of Eq. (1) are the effective fields that each sublattice experiences due to the applied external magnetic field; exchange field; anisotropy term; and the DMI. We show (S.I. section III) that these equations can be re-written in the basis \({{{{{\boldsymbol{\delta }}}}}}{{{{{{\bf{m}}}}}}}_{{{{{{\boldsymbol{+}}}}}}}\) (optical) and \({{{{{\boldsymbol{\delta }}}}}}{{{{{{\bf{m}}}}}}}_{{{{{{\boldsymbol{-}}}}}}}\) (acoustic) and in matrix form: \({\omega }^{2}\begin{array}{c}{{{{{\boldsymbol{\delta }}}}}}{{{{{{\bf{m}}}}}}}_{{{{{{\boldsymbol{+}}}}}}}\\ {{{{{\boldsymbol{\delta }}}}}}{{{{{{\bf{m}}}}}}}_{{{{{{\boldsymbol{-}}}}}}}\end{array}=\left[\begin{array}{cc}{\omega }_{O}^{2} & \Delta \\ -\Delta & {\omega }_{A}^{2}\end{array}\right]\begin{array}{c}{{{{{\boldsymbol{\delta }}}}}}{{{{{{\bf{m}}}}}}}_{{{{{{\boldsymbol{+}}}}}}}\\ {{{{{\boldsymbol{\delta }}}}}}{{{{{{\bf{m}}}}}}}_{{{{{{\boldsymbol{-}}}}}}}\end{array}\). If \({D}_{x}\) is nonzero, an off-diagonal term \(\Delta\) appears which represents the strength of the DMI coupling. Here \({\omega }_{O}\) and \({\omega }_{A}\) are the bare optical and acoustic mode frequencies. We found that the experimentally measured coupling strength leads to a \({{\mu }_{0}D}_{x}\) value of 11 mT, consistent with micromagnetic simulations and previously reported experimental values36(S.I. section VI). This mechanism for the magnon–magnon coupling can mediate the conversion of a magnon of one parity to that of the alternate parity, resulting in the coherent transfer of information between these two magnon modes. Since the bare optical and acoustic modes are no longer eigenstates of the Hamiltonian, time dependence of their mutual conversion may exhibit Rabi-like oscillations49. The new eigenstates near the crossing point, thereby, take the form of a linear combination between the two bare modes and represents a newly formed two-state character.
The DMI field also accounts for the presence of optical modes in the transverse pumping configuration and the ‘dark’ optical mode at high fields. The antisymmetric nature of the DMI manifests as an effective microwave field hrf, DMI that has opposite signs as experienced by the different spin sublattices. The application of a spatially uniform microwave field naturally exerts a torque on each sublattice which is in the same direction for the two sublattices and drives their in-phase motion. However, when the DMI manifests, this deflection will result in the effective hrf, DMI in the alternate sublattice which points towards \({D}_{x}(\hat{{{{{{\bf{x}}}}}}}\times {{{{{\boldsymbol{\delta }}}}}}{\hat{{{{{{\bf{m}}}}}}}}_{{{{{{\bf{B}}}}}}})\)for sublattice A and\({-D}_{x}(\hat{{{{{{\bf{x}}}}}}}\times {{{{{\boldsymbol{\delta }}}}}}{\hat{{{{{{\bf{m}}}}}}}}_{{{{{{\bf{A}}}}}}})\) for sublattice B. This effective field hrf, DMI reverses polarity at the same microwave frequency, and acts on opposite directions in each sublattice (S.I. Fig. S8). Due to this antisymmetric nature of the DMI, the torques applied to the sublattices allow for the dark mode to be observed. Even though hrf, DMI\(\perp {{{{{{\bf{H}}}}}}}_{{{{{{\bf{ext}}}}}}}\), its sublattice-dependent direction causes it to be even under twofold rotation and allows it to transfer energy to the optical mode, as also observed in micromagnetic simulations (S.I. section VI).
Our results demonstrate the possibilities of layered 2D HOIP materials for strong and tunable hybrid magnonics by utilizing their low-dimensional magnetic dynamics and chemical versatility. By varying the organic spacer, the low symmetry of layered hybrid structure opens exciting perspectives for studying topological chiral spin textures induced by the DMI along with its tunability, and enables a strongly hybridized magnon state to emerge, resembling the quantum-mechanical coupling phenomena for quantum information science. Our work expands the scope of realizing solution-processed antiferromagnetic phenomena in the electronics-accessible gigahertz frequency range, holding promises for research surrounding synthetic antiferromagnet engineering and materials synthesis in the field of hybrid magnonics.
Methods
Synthesis of EA2CuCl4 single crystals
Cu-EA ((CH3CH2NH3)2CuCl4) single crystal was grown by controlled temperature cooling method. 652.32 mg EACl and 537.8 mg CuCl2 was added into 2 mL dimethylformamide (DMF) and stirred overnight at 100 °C to get completely dissolved. Then the solution was transferred to the oil bath preheated at 100 °C and cooled with the rate of 1 °C/h to room temperature. The precipitated yellow-brown color platelet single crystals were collected by vacuum filtration and further dried in the vacuum oven at 60 °C for 24 h. The crystals used in Fig. 3 were obtained by the following method: Copper(II) chloride dihydrate (CuCl2·2H2O, ≥ 99.95%), Ethylamine solution (EA, 66.0-72.0% in H2O) and hydrochloric acid (HCl, 37%) were all purchased from Sigma–Aldrich. 0.341 g (2 mmol) of CuCl2·2H2O and 333 μL (4 mmol) EA were dissolved in 2 ml of 37% HCl solution by heating to 100 °C under constant magnetic stirring. Then the mixed solution was naturally cooled to room temperature. Finally, the yellow plate-like crystals EA2CuCl4 were obtained and isolated by vacuum filtration.
UV-VIS spectroscopy
The absorption spectra were obtained by optical diffuse reflectance mode in the UH5700 spectrophotometer with a 60 mm diameter integrating sphere. They were measured in the range of 200–1300 nm with 0.5 nm resolution at room temperature. BaSO4 was used as the 100% reflectance background and the crystals were ground into powder and adhered to the barium sulfate background by pressing for measurement.
Powder X-ray diffraction
The powder X-ray diffraction data were collected on the PANalytical X’Pert Pro powder-X-ray diffractometer with a Cu source.
SQUID measurements
A single crystal of Cu-EA was obtained and secured between two small pieces of Kapton (polyamide) tape. These single crystals are relatively flat disks with the c-axis oriented normal to the plane of the crystal. The a-axis was determined by angular-dependent measurements to find the direction of the spin-flop transition. A Magnetic Property Measurement System (MPMS, Quantum Design) was used to measure all magnetic susceptibility data. The sample was secured to a quartz rod using Kapton tape for in-plane (IP) measurements and to the opening of a plastic straw for measurements in which the magnetic field is applied out of plane (OOP). For temperature dependent susceptibility, the magnetic moment was measured in a relatively low magnetic field of 10 mT and under the vibrating sample magnetometer (VSM) mode after cooling in zero field.
Antiferromagnetic resonance measurements
For the antiferromagnetic resonance (AFMR) measurements, the same single crystal of Cu-EA used for SQUID magnetometry was secured with Kapton tape to the waveguide of the commercially available FMR probe designed to be compatible with the Physical Property Measurement System (PPMS, Quantum Design). To reduce data collection times, the FMR spectrometer that was supplied with the probe was not used to supply the microwave power, but was used as a current source for the Helmholtz coil. A Keysight EXG Analog Signal Generator N5173B was used as a microwave power source with an amplitude of −2 dBm and frequencies between 0.8 and 5.5 GHz in 0.1 GHz steps. After passing by the crystal of Cu-EA, the signal was intercepted by a Krytar microwave power detector model 201B and the corresponding voltage was routed to an EG&G 7260 DSP lock in amplifier. The reference signal for the current source driving the Helmholtz coil (490 Hz) was output to the lock in amplifier. For parallel pumping measurements the sample was removed and re-mounted to the section of the waveguide strip running perpendicular to the external magnetic field. For azimuthal angle Φ dependent measurements the sample was removed from the waveguide and manually rotated.
Angular-dependent AFMR measurements
A vector network analyzer (model HP 8720 C) was used to measure the microwave transmission (S21) for the angular-dependent FMR measurements. The Cu-EA sample was fixed to a coplanar waveguide with Kapton tape. The azimuthal angle was determined by angular-dependent measurements along the a-b plane. The out-of-plane tilt angle Θ was varied by rotating the waveguide manually without re-mounting the sample nor changing the in-plane angle Φ. The measurement was done in a cryostat at 2.5 K with the probing RF power set at −10 dBm. The coplanar waveguide provides both parallel and transverse pumping, as shown in Fig. 2a.
Data availability
The source data for the Supplementary Information are available from the corresponding authors upon reasonable request. Source data are provided with this paper.
References
Moriya, T. Anisotropic superexchange interaction and weak ferromagnetism. Phys. Rev. 120, 91–98 (1960).
Avci, C. O., Lambert, C.-H., Sala, G. & Gambardella, P. Chiral coupling between magnetic layers with orthogonal magnetization. Phys. Rev. Lett. 127, 167202 (2021).
Xia, K., Zhang, W., Lu, M. & Zhai, H. Noncollinear interlayer exchange coupling caused by interface spin-orbit interaction. Phys. Rev. B 55, 12561–12565 (1997).
Fernández-Pacheco, A. et al. Symmetry-breaking interlayer Dzyaloshinskii–Moriya interactions in synthetic antiferromagnets. Nat. Mater. 18, 679–684 (2019).
Meijer, M. J. et al. Chiral spin spirals at the surface of the van der Waals ferromagnet Fe3GeTe2. Nano Lett. 20, 8563–8568 (2020).
Fert, A., Reyren, N. & Cros, V. Magnetic skyrmions: advances in physics and potential applications. Nat. Rev. Mater. 2, 1–15 (2017).
Benitez, M. J. et al. Magnetic microscopy and topological stability of homochiral Néel domain walls in a Pt/Co/AlOx trilayer. Nat. Commun. 6, 8957 (2015).
Perez, N. et al. Chiral magnetization textures stabilized by the Dzyaloshinskii-Moriya interaction during spin-orbit torque switching. Appl. Phys. Lett. 104, 092403 (2014).
Lee, O. J. et al. Central role of domain wall depinning for perpendicular magnetization switching driven by spin torque from the spin Hall effect. Phys. Rev. B 89, 024418 (2014).
Zhang, X.-X. et al. Gate-tunable spin waves in antiferromagnetic atomic bilayers. Nat. Mater. 19, 838–842 (2020).
Boventer, I. et al. Room-temperature antiferromagnetic resonance and inverse spin-hall voltage in canted antiferromagnets. Phys. Rev. Lett. 126, 187201 (2021).
Cham, T. M. J. et al. Anisotropic gigahertz antiferromagnetic resonances of the easy-axis van der Waals antiferromagnet CrSBr. Nano Lett. 22, 6716–6723 (2022).
Wang, H. et al. Spin pumping of an easy-plane antiferromagnet enhanced by Dzyaloshinskii–Moriya interaction. Phys. Rev. Lett. 127, 117202 (2021).
Wang, Z. et al. Magnetic field dependence of antiferromagnetic resonance in NiO. Appl. Phys. Lett. 112, 252404 (2018).
Li, J. et al. Spin current from sub-terahertz-generated antiferromagnetic magnons. Nature 578, 70–74 (2020).
Vaidya, P. et al. Subterahertz spin pumping from an insulating antiferromagnet. Science 368, 160–165 (2020).
Zhang, X., Zou, C.-L., Jiang, L. & Tang, H. X. Strongly coupled magnons and cavity microwave photons. Phys. Rev. Lett. 113, 156401 (2014).
Barman, A. et al. The 2021 magnonics roadmap. J. Phys. Condens. Matter 33, 413001 (2021).
Nugroho, A. A. et al. Cross-type orbital ordering in the layered hybrid organic-inorganic compound (C6H5CH2CH2NH3)2CuCl4. Phys. Rev. B 94, 184404 (2016).
Kim, K.-Y. et al. Intrinsic magnetic order of chemically exfoliated 2D Ruddlesden–Popper organic–inorganic halide perovskite ultrathin films. Small 16, 2005445 (2020).
Willett, R. D., Gómez-García, C. J. & Twamley, B. Long-range order in layered perovskite salts—structure and magnetic properties of [(CH3)2CHCH2NH3]2CuX4 (X = Cl, Br). Eur. J. Inorg. Chem. 2012, 3342–3348 (2012).
De Jongh, L. J. & Miedema, A. R. Experiments on simple magnetic model systems. Adv. Phys. 50, 947–1170 (2001).
Ding, J. et al. Electronic and magnetic properties of an organic multiferroic: (C2H5NH3)2CuCl4. J. Magn. Magn. Mater. 346, 91–95 (2013).
Šenjug, P. et al. Magnetic behaviour of (C2H5NH3)2CuCl4 type multiferroic. J. Magn. Magn. Mater. 479, 144–148 (2019).
Park, G., Oh, I.-H., Park, J. M. S., Hahn, S. & Park, S.-H. Magnetic structure of inorganic–organic hybrid (C6H5CH2CH2NH3)2MnCl4 using magnetic space group concept. Symmetry 12, 1980 (2020).
Long, G. et al. Spin control in reduced-dimensional chiral perovskites. Nat. Photonics 12, 528–533 (2018).
Kim, Y.-H. et al. Chiral-induced spin selectivity enables a room-temperature spin light-emitting diode. Science 371, 1129–1133 (2021).
Long, G. et al. Chiral-perovskite optoelectronics. Nat. Rev. Mater. 5, 423–439 (2020).
De Jongh, L. J., Van Amstel, W. D. & Miedema, A. R. Magnetic measurements on (C2H5NH3)2 CuCl4: ferromagnetic layers coupled by a very weak antiferromagnetic interaction. Physica 58, 277–304 (1972).
MacNeill, D. et al. Gigahertz frequency antiferromagnetic resonance and strong magnon-magnon coupling in the layered crystal CrCl3. Phys. Rev. Lett. 123, 047204 (2019).
Li, M., Lu, J. & He, W. Symmetry breaking induced magnon-magnon coupling in synthetic antiferromagnets. Phys. Rev. B 103, 064429 (2021).
Xing, W. et al. Magnon transport in quasi-two-dimensional van der Waals antiferromagnets. Phys. Rev. X 9, 011026 (2019).
Tabuchi, Y. et al. Coherent coupling between a ferromagnetic magnon and a superconducting qubit. Science 349, 405–408 (2015).
Li, Y. et al. Hybrid magnonics: physics, circuits, and applications for coherent information processing. J. Appl. Phys. 128, 130902 (2020).
Yamazaki, H. Interlayer exchange field in (CnH2n+1NH3)2CuCl4 with n=1-6 and (C6H5CmH2mNH3)2CuCl4 with m=1, 2 determined by parallel pumping experiment. J. Phys. Soc. Japan 41, 1911–1917 (1976).
Bloembergen, P., Berkhout, P. J. & Franse, J. J. M. Static magnetic torque measurements on a system of ferromagnetic layers, coupled by feeble antiferromagnetic interactions; weak ferromagnetic behaviour. AIP Conf. Proc. 10, 1598–1602 (1973).
Bogdanov, A. N., Zhuravlev, A. V. & Rößler, U. K. Spin-flop transition in uniaxial antiferromagnets: Magnetic phases, reorientation effects, and multidomain states. Phys. Rev. B 75, 094425 (2007).
Steadman, J. P. & Willett, R. D. The crystal structure of (C2H5NH3)2CuCl4. Inorg. Chim. Acta 4, 367–371 (1970).
Chen, X., Zheng, C., Zhou, S., Liu, Y. & Zhang, Z. Manipulation of time- and frequency-domain dynamics by magnon-magnon coupling in synthetic antiferromagnets. Magnetochemistry 8, 7 (2022).
Dai, C. & Ma, F. Strong magnon–magnon coupling in synthetic antiferromagnets. Appl. Phys. Lett. 118, 112405 (2021).
Hu, B. & He, W. Tunable magnon-magnon coupling mediated by in-plane magnetic anisotropy in synthetic antiferromagnets. J. Magn. Magn. Mater. 565, 170283 (2023).
Sklenar, J. & Zhang, W. Self-hybridization and tunable magnon-magnon coupling in van der Waals synthetic magnets. Phys. Rev. Appl. 15, 044008 (2021).
Liensberger, L. et al. Exchange-enhanced ultrastrong magnon-magnon coupling in a compensated ferrimagnet. Phys. Rev. Lett. 123, 117204 (2019).
Adhikari, K., Choudhury, S., Barman, S., Otani, Y. & Barman, A. Observation of magnon–magnon coupling with high cooperativity in Ni80Fe20 cross-shaped nanoring array. Nanotechnology 32, 395706 (2021).
Chen, J. et al. Strong interlayer magnon-magnon coupling in magnetic metal-insulator hybrid nanostructures. Phys. Rev. Lett. 120, 217202 (2018).
Sud, A. et al. Tunable magnon-magnon coupling in synthetic antiferromagnets. Phys. Rev. B 102, 100403 (2020).
He, W. et al. Anisotropic magnon–magnon coupling in synthetic antiferromagnets. Chin. Phys. Lett. 38, 057502 (2021).
Keffer, F. & Kittel, C. Theory of antiferromagnetic resonance. Phys. Rev. 85, 329–337 (1952).
Harder, M., Yao, B. M., Gui, Y. S. & Hu, C.-M. Coherent and dissipative cavity magnonics. J. Appl. Phys. 129, 201101 (2021).
Acknowledgements
D.S. and M.C.B. are primarily supported through the Center for Hybrid Organic Inorganic Semiconductors for Energy (CHOISE), an Energy Frontier Research Center funded by the Office of Basic Energy Sciences, Office of Science within the U.S. Department of Energy (Sample preparation, characterization, and AFMR measurements). This work was authored in part by the National Renewable Energy Laboratory (NREL), operated by Alliance for Sustainable Energy LLC, for the U.S. Department of Energy (DOE) under contract no. DE-AC36-08GO28308. The views expressed in this article do not necessarily represent the views of the DOE or the U.S. Government. D.S. acknowledges the partial financial support from Department of Energy grant DE-SC0020992 and the National Science Foundation under award DMR-2143642 (Magnetic characterization). H.L. acknowledges start-up funding support from the Hong Kong University of Science and Technology and the Research Grants Council of Hong Kong via the Early Career Scheme (ECS, 26300721) (Sample synthesis). T.W., A.A., and D.S. acknowledges the partial financial support from the National Science Foundation award ECCS-1936527 (Single crystal preparation). W.Z. acknowledges the partial financial support from the National Science Foundation award ECCS-1941426 and the Air Force Office of Scientific Research award AFOSR-FA2386-21-1-4091 (Data analysis). L.L. acknowledges financial support from the National Science Foundation under award DMR-2104912 (Angular-dependent AFMR measurements).
Author information
Authors and Affiliations
Contributions
D.S., M.C.B., and L.L. conceived this study and the experiments. A.C. was responsible for the SQUID magnetometer, AFMR (Fig. 2), and model derivations. Z.W., H.L., T.W., and A.A. provided the single crystals. J.C. was responsible for field angular-dependent AFMR measurements (Fig. 3), and micromagnetic simulations. S.R., J.S., and W.Z. validated the model. A.C. and D.S. wrote the first draft. D.S., M.C.B., and L.L. were responsible for project planning, group managing, and finalizing the manuscript. All authors discussed the results, worked on data analysis and manuscript preparation.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing interests.
Peer review
Peer review information
Nature Communications thanks the anonymous reviewer(s) for their contribution to the peer review of this work.
Additional information
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Source data
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Comstock, A.H., Chou, CT., Wang, Z. et al. Hybrid magnonics in hybrid perovskite antiferromagnets. Nat Commun 14, 1834 (2023). https://doi.org/10.1038/s41467-023-37505-w
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-023-37505-w
- Springer Nature Limited
This article is cited by
-
Chiral multiferroicity in two-dimensional hybrid organic-inorganic perovskites
Nature Communications (2024)
-
Reconfigurable spin current transmission and magnon–magnon coupling in hybrid ferrimagnetic insulators
Nature Communications (2024)