Abstract
Semiconductor heterostructures have enabled a great variety of applications ranging from GHz electronics to photonic quantum devices. While nonlinearities play a central role for cutting-edge functionality, they require strong field amplitudes owing to the weak light-matter coupling of electronic resonances of naturally occurring materials. Here, we ultrastrongly couple intersubband transitions of semiconductor quantum wells to the photonic mode of a metallic cavity in order to custom-tailor the population and polarization dynamics of intersubband cavity polaritons in the saturation regime. Two-dimensional THz spectroscopy reveals strong subcycle nonlinearities including six-wave mixing and a collapse of light-matter coupling within 900 fs. This collapse bleaches the absorption, at a peak intensity one order of magnitude lower than previous all-integrated approaches and well achievable by state-of-the-art QCLs, as demonstrated by a saturation of the structure under cw-excitation. We complement our data by a quantitative theory. Our results highlight a path towards passively mode-locked QCLs based on polaritonic saturable absorbers in a monolithic single-chip design.
Similar content being viewed by others
Introduction
Semiconductor lasers represent a revolutionary milestone in the development of coherent light sources. Laser diodes are compact, energy-efficient and cost-effective devices with extraordinary design flexibility, which has led to countless applications ranging from data storage to ultrafast solid-state lasers1,2,3. While their lasing process exploits interband transitions of electrons, quantum cascade lasers4,5 (QCLs) are based on intersubband (ISB) transitions in electrically biased semiconductor multi-quantum well (MQW) structures and extend the emission spectrum towards the mid-infrared and THz spectral regions. Employing sophisticated band structure engineering, their centre wavelength can be tailored with great flexibility while enabling output powers of several watts6, as well as large gain bandwidths facilitating frequency comb operation7,8,9,10,11 and operation up to room-temperature by intra-cavity difference-frequency mixing12,13.
Whereas commercial QCLs available today operate in continuous-wave (cw) mode, there has been a strong demand for QCLs generating few or even single-cycle pulses. Such inexpensive, compact, and highly stable devices could replace complex and expensive table-top laser sources and boost exciting applications ranging from rapid gas sensing via ultrafast communications6 to fundamental research investigating low-energy elementary excitations in condensed matter, including superconducting currents14, magnons15 or Dirac currents16, on subcycle time scales. Promising recent demonstrations of short-pulse generation in THz QCLs exploit active mode locking by direct phase synchronization17 or by radio frequency modulation of the bias voltage18,19,20,21,22, which has enabled record-short pulse durations of 4 ps21. Generating single-cycle pulses, however, requires passive mode locking facilitated by saturable absorber (SA) structures with short response times and low saturation thresholds.
While semiconductor-based SA materials are wide-spread in the near-infrared spectral range23, only a limited number of concepts exists in the THz domain. Recent demonstrations based on n-doped semiconductors24, superconducting metamaterials25 or graphene26,27 have pioneered this field, yet without achieving simultaneously low saturation intensities and design flexibility regarding the operation wavelength and bandwidth. ISB transitions are promising candidates, enabling straightforward tunability and monolithic integration into the QCL cavity. Still, they suffer from relatively high saturation intensities28. A much more powerful solution is provided by ultrastrong coupling of such ISB transitions to the near field of metallic resonators. The field enhancement resulting from the small mode volume of the cavity significantly enhances the optical absorption as compared to the bare electronic transition, where the same value of absorption could only be achieved by an increase of the electron density. Thus, ultrastrong coupling allows reducing the required density of electrons, in turn drastically lowering the threshold of saturation and modifying its dynamics. In this regime of light–matter interaction, the resonator and matter mode periodically exchange energy at a rate known as the vacuum Rabi frequency, ΩR, leading to the formation of new eigenmodes called ISB cavity polaritons29,30,31 with a spectral separation of 2ΩR. Strong excitation reduces the oscillator strength of the ISB transition and ultimately leads to a collapse of ΩR, which may completely bleach the absorption at the resonance frequencies of the polaritons, in equilibrium32,33,34. Owing to the structural similarity of this design and a QCL cavity, a waveguide-type version of this SA could even be integrated into the laser structure and potentially be fabricated in the same epitaxial process (see Fig. 1c). However, it is yet to be determined whether the saturation intensity can be reduced to the level of state-of-the-art QCLs, and whether the onset as well as the decay of saturation are sufficiently fast to allow for few-cycle operation and efficient suppression of cw modes.
In this work, we characterize the coherent ultrafast dynamics of a THz polaritonic SA and reveal a reduction of the saturation threshold by a factor of 9.5 as compared to the bare electronic transition. This significant reduction in saturation intensity is due to the ultrastrong light–matter coupling and, consequently, allows for a 10 times lower electron density than in the weakly coupled case while still maintaining the same strong absorption. We first demonstrate the saturation of the polaritonic system at cw intensities accessible by a THz QCL. Moreover, two-dimensional phase and amplitude-resolved THz strong-field spectroscopy reveals nonlinearities up to six-wave mixing and a dynamical collapse of light–matter coupling, on time scales appropriate for single-cycle operation of a QCL.
Results
Design and properties of ISB polaritonic absorbers
We prepare a MQW structure consisting of 35 GaAs quantum wells (QWs) of a thickness of 36 nm and a nominal doping concentration of 5.0 × 1010 cm−2 charge carriers, per QW. The QWs are separated by Al0.15Ga0.85As barriers of a thickness of 20 nm. Schrödinger–Poisson calculations predict a dipole moment of μ12 = 3.8 nm × e (e is the elementary charge) and an ISB transition frequency of 2.7 THz, which is in good agreement with the value of νISB = 2.66 THz (Fig. 1a, blue curve) obtained by transmission measurements (Fig. 1a, inset; see also “Methods” section). The cavity consists of a planar gold back surface below the MQW stack and a gold grating structure with a period of 16 µm processed on top (see also Supplementary Fig. 3). A rigorous coupled wave analysis (RCWA) (Fig. 1b) shows that the fundamental cavity mode at a frequency of ν0 = 2.64 THz couples to the ISB transition, leading to the formation of two distinct polariton states. Reflection spectra of the coupled structure obtained by Fourier transform infrared spectroscopy at a temperature of 10 K reveal the lower (LP) and upper (UP) polariton resonances at frequencies of νLP = 2.52 THz, and νUP = 2.85 THz, respectively (Fig. 1a, red curve), corresponding to a normalized coupling strength of 2ΩR/ω0 = 0.12. The data also allow extracting an effective carrier density of 1.0 × 1010 cm−2. In contrast, in a room-temperature reference measurement, the thermal population of the second subband state drastically reduces the ISB oscillator strength, leading to a single resonance at the frequency of the fundamental cavity mode (Fig. 1a, black curve). This collapse of the coupling strength should also occur at low temperatures by a strong population of the second subband by THz excitation. FDFD simulations of the ultrastrongly coupled system yield the precise field distribution inside the microcavity, which exhibits regions where the z-component of the electric field is enhanced by more than one order of magnitude with respect to the incident electric field (see Fig. 1d). Factoring in the cavity quality factor of 6.7 as well as the oscillator strength and charge carrier concentration of the electronic system, we expect that a fluence of ∼10 W cm−2 should realize this situation and lead to a saturation of the polariton resonances32,33,34 (Fig. 1d, e, and see “Methods” section).
Saturation of ISB polaritons under intense THz-excitation
We test this idea by probing the reflectivity while exciting the structure with an intense cw THz beam from a QCL under normal incidence, polarized in the x–z-plane. The pump frequency of 2.75 THz is tuned slightly below νUP. This frequency is chosen to account for the red shift expected by saturation and should lead to the lowest saturation intensity. The resulting spectra are plotted in Fig. 2a for various pump intensities, Ip, along with a reference spectrum without excitation (black curve). Whereas for low Ip (blue curves), the spectral response is only slightly modified, increasing intensities (purple curves) lead to a saturation and a reduction of the polariton splitting, resulting from bleaching of the ISB transition. Eventually, for Ip = 11 W cm−2 (red curve), ΩR is strongly reduced and the polariton resonances partially merge, as expected from the simulation results of Fig. 1e. While a pump-induced reduction of the absorption at the UP resonance already demonstrates the saturation effect required for power modulation in a QCL, the ultrafast polariton dynamics relevant for femtosecond operation remain inaccessible in this cw setting.
Therefore, we proceed by measuring the response to intense single-cycle THz pulses with a variable peak electric field of up to 55 kV cm−1 generated by optical rectification of near-infrared laser pulses in a lithium niobate crystal (see “Methods” section). The pulses, polarized in the x–z-plane, are reflected off the structure under an angle of incidence of 10° and the emitted radiation is detected by electro-optic sampling with subcycle resolution. Figure 2b shows the trailing oscillations of the emitted THz field after the main pulse, whereby the polariton resonances manifest as a pronounced beating feature. Increasing the THz peak field, the beating frequency is slowed down and eventually disappears, resulting in an exponentially decaying monochromatic transient response. The corresponding spectra (Fig. 2c) reveal a progressive reduction of ΩR with increasing pump intensity up to a full collapse of light–matter coupling, and a corresponding increase of the reflectivity of the LP resonance (Fig. 2d), observable even in this scenario of a single pulse acting both as the pump and the probe of the polarization response.
Comparing both scenarios, cw pumping continuously excites carriers slower than the dephasing rate. This condition leads to an incoherent population, bleaching of the transition, and a collapse of ΩR. In contrast, strong THz pulses may collapse ΩR on a time scale comparable to the cycle duration of light while preserving the ISB coherence, as shown below. This setting opens up the possibility of energy-conserving pulse shaping, where absorption and subsequent coherent reemission are used to further shorten ultrashort pulses of light35. As these coherent dynamics suppress excitation-induced dephasing (EID), a tentatively lower linewidth is obtained as compared to the cw case.
Our semiclassical theory implements excitations of the cavity in the bosonic limit; the dynamics of the electronic excitation are treated by the optical Bloch equations, taking into account the microscopically inhomogeneous near-field profile of our cavity. Light–matter interaction is accounted for including anti-resonant interaction terms beyond the rotating-wave approximation, and the dynamics are solved for the experimental THz waveform (see “Methods” section). Furthermore, we implement EID by a population-dependent polarization decay time T2, which we retrieve directly from the linewidth of the experimental spectra. The calculation (Fig. 2e) reproduces the experimental spectra and suggests that the inversion of the ISB population and the corresponding collapse of ΩR occur within <1 ps, as inferred from the calculated rise time of the population (not shown). To experimentally access these subcycle nonlinearities we track the coherent and incoherent polarization dynamics directly by a full two-dimensional (2D), field-sensitive THz-spectroscopy.
2D THz spectroscopy of ISB polaritons
To this end, two phase-locked, collinearly propagating THz pulses (labelled A and B), which are polarized in the x–z-plane, are delayed by a variable time τ and focused onto the structure. The reflected waveform \({\mathcal{E}}\)AB is detected by electro-optic sampling (Fig. 3a). We modulate both beams independently of each other and subtract their individual fields \({\mathcal{E}}\)A and \({\mathcal{E}}\)B from \({\mathcal{E}}\)AB, which allows us to extract the emitted field \({\mathcal{E}}\)NL resulting from nonlinear multi-photon interaction processes. By varying τ, we control the corresponding phases of the individual pulses. Figure 3b shows \({\mathcal{E}}\)NL as a function of t and τ, for a THz peak intensity of 7 W cm−2. Fronts of constant phase of pulse A appear as vertical lines, while those of pulse B are slanted by 45°, since its field crests are located at constant values of t–τ. Within the temporal overlap region of the polarization induced by the pulses (simultaneously t > 0 ps and t + τ > 0 ps), \({\mathcal{E}}\)NL is coherently modulated along both temporal axes, whereby \({\mathcal{E}}\)NL is strongest for a temporal coincidence of both pulses, at τ = 0. Here, an interference pattern around t ≈ 4 ps attests to a beating of the nonlinear polarizations of the two polariton resonances.
More quantitatively, we disentangle the nonlinear response into its contributions by a two-dimensional Fourier transform, and plot the spectral amplitude \(\tilde{\mathcal{E}}_{{\mathrm{NL}}}\) as a function of the frequencies νt and ντ associated with t and τ, respectively (Fig. 3c). The spectra reveal five groups of nonlinear processes including pump–probe (PP) interactions resulting from incoherent saturation of the ISB transition, as well as four-wave (4WM) and six-wave mixing (6WM) contributions associated with nonlinear polarization dynamics, where each group features distinct narrowband signatures of both polariton branches (see “Methods” section for the polarization underlying different nonlinearities). We again support this analysis by our microscopic theory, on a quantitative level (Fig. 3d).
Next, we extract the dynamics of the PP signal near ντ = 0 THz by bandpass filtering of the corresponding spectral range and back-transformation into the time domain, which reveals the decay as a function of τ for a fixed delay time t = 1.66 ps (Fig. 3e, red curve). Initially, the amplitude follows the temporal shape of the incident pulses, thus including a rapid initial increase and subsequent decay. The slight delay of the maximum at Δτ = 0.5 ps is associated with the time required to transfer energy from the cavity to the electronic excitation. From τ = 2.5 ps onward, pulse A interacts with the residual polarization induced by pulse B and thus directly monitors the population dynamics. Owing to the periodic energy exchange between cavity and electronic system, the net decay rate alternates between the faster decay of the cavity (black arrow), and the slower decay of the electronic excitation. Fitting the data in this delay range with an exponential function, we find an averaged characteristic population decay time of T1 = 3.3 ps.
This dynamics is well confirmed by our simulations (Fig. 3f). The modulus of the cavity field (red curve) rises steeply upon excitation by the external THz pulse before the energy is almost completely transferred to the two-level system, within a time delay set by half of the vacuum Rabi cycle. The strong PP signal emerges in lock with the population dynamics. Fitting the steep rise of the population for t < 0 ps with the time-integral of a Gaussian envelope function, we extract a FWHM of the excitation time of only 900 fs (broken curve in Fig. 3f). For the weak external driving shown here, the energy contained in the ISB system is subsequently fed back into the cavity while the population rapidly decreases, manifesting in the slight modulation of the PP signal for τ > 0 seen in Fig. 3e. In case of a strong excitation, however, population inversion is reached and the strong coupling breaks down, leading to a saturated absorption (see Supplementary Fig. 2). These ultrafast response and recovery dynamics are ideally suited for pulsed few-cycle operation of a QCL with pulse durations as short as two picoseconds, only limited by the excitation time of the SA. We note that the achievable pulse duration may be yet shorter, as even a partial saturation may provide the required preference of the pulsed operation over the cw mode.
Saturation intensity of ISB polaritons
Beyond these favourable ultrafast characteristics, the ultrastrong light–matter coupling of our polaritonic system promises significantly reduced saturation intensities as compared to the bare electronic transition28. From a systematic variation of the incident THz field amplitude, we find that the amplitudes of the PP (Fig. 4a, red curve) and 4WM signals (Fig. 4b, red curve) initially increase with increasing pump intensity until both reach a distinct maximum at an intensity of 10 W cm−2. A further increase of the pump intensity saturates the ISB transition, which reduces the strength of light–matter coupling and leads to a reduction of the nonlinear signal. In comparison, the nonlinearities of the bare ISB transition28 show qualitatively similar behaviour (Fig. 4a, b, blue curves), yet for a tenfold increase of the intensity. This significant scaling advantage of our polaritonic approach allows saturation intensities well achievable in state-of-the-art QCLs, as demonstrated by our findings in the cw experiments. Moreover, the saturation intensity under pulsed excitation, corresponding to a fluence of 0.1 nJ cm−2, is several orders of magnitude lower than in previous demonstrations, where up to several tens of µJ cm−2 were required24,25, and comparable to graphene-based approaches26,27. Our structure’s non-saturable losses of only 15% are significantly lower than previously reported values ranging between 40% (ref. 25) and 85% (ref. 24), while the reflectivity doubles under saturation, representing a high energy efficiency relevant for low-power devices.
Discussion
In conclusion, we have introduced an ultrafast SA implemented by THz ISB polaritons in a semiconductor structure suitable as a monolithically integrated intra-cavity element of a THz QCL. Strong-field excitation by single-cycle THz waveforms has unveiled coherent nonlinear dynamics including up to six-wave mixing processes, which lead to a transient collapse of light–matter coupling on subcycle time scales. The resulting strong modulation of the optical response within a single cycle of the carrier wave and the recovery time as short as 3.3 ps open the door to passive, self-starting mode-locking of QCLs emitting few-cycle THz pulses. Increasing the light–matter coupling even further by improving the field confinement or increasing the dipole moment of the ISB transition may enable even faster saturation dynamics and larger vacuum Rabi splitting, increasing the operational bandwidth and response times towards single-cycle operation at high repetition rates. Moreover, the large degree of coherence offers the prospect for energy-conserving, lossless pulse shaping. Specifically, four-wave and six-wave-mixing nonlinearities discovered here, may lead to drastic efficiency improvements over designs relying solely on incoherent absorption. Our concept provides quantitative design guidelines for a new generation of compact, cost-effective, electrically driven sources of intense THz pulses for a broad range of applications in ultrafast sciences, data storage, high-speed communication and spectroscopy.
Methods
Device fabrication
The polaritonic absorbers were fabricated by evaporating a gold layer of a thickness of 500 nm onto the QW sample, and an n++-GaAs substrate, both of a thickness of 500 µm. In a next step, the two parts were joined by thermo-compressive Au–Au wafer bonding. Subsequently, the substrate of the QW sample was etched down to a thickness of 2.03 μm, first via mechanical polishing and then by wet-chemical etching, until the etch-stop layer composed of Al0.5Ga0.5As was reached. The latter was then selectively removed in a second wet-etching chemical process. A one-dimensional photonic structure based on a supercell scheme including a number of NBragg identical gold stripes (periodicity, 16 µm) was fabricated on the top surface of the MQW stack using a two-step optical lithographic process, followed by thermal evaporation of a Cr/Au layer (thicknesses, 10 nm/100 nm) and lift-off. Finally, the processed samples were mounted on a copper sub-mount for reflection/transmission measurements at cryogenic temperatures.
Fourier-transform infrared (FTIR) spectroscopy
The polaritonic samples were characterized by FTIR spectroscopy employing an evacuated spectrometer (Bruker, Vertex 80), a broadband globar source, and a silicon bolometer. Multi-pass transmission experiments (Fig. 1a, inset) were performed for the bare MQW sample after lapping its front and back facets at an angle of 45°. Reflectance measurements were carried out for an angle of incidence of 10° for various temperatures of the heat sink ranging from room temperature (RT) down to 6 K. The small angle of 10° minimizes frequency shifts of the resonator, compared to the resonance at normal incidence. For sufficiently low temperatures, the upper photonic mode strongly couples with the ISB transition, leading to the formation of the lower and upper polariton modes with a frequency splitting of 0.34 THz. Pump–probe experiments were performed by exciting the structure with the cw QCL (see Supplementary Fig. 5 for emission spectra) operating at a frequency of 2.75 THz, under normal incidence, while probing the reflectivity under an angle of 10°. The entire measurement setup was housed in an evacuated chamber.
Calculation of steady-state saturation
We quantitatively calculate the saturation threshold for cw excitation using a frequency-dependent rate-equation model. The rate of absorption takes the form
where n2 is the charge density in the second subband, τISB is the ISB relaxation time, I is the incident intensity, and R is the reflectance, which depends on the frequency ω and the difference of the populations of the first and second subbands, Δn = n1 − n2. The conservation of charge carriers, n1 + n2 = n(0), where n(0) is the chemical doping density, allows us to solve Eq. (1) for n2, leading to the density of excited carriers as a function of intensity, Δn(I) as shown in Fig. 1e. Moreover, we apply a coupled-mode theory to calculate the reflectivity spectra, taking into account the reduction of the coupling strength ΩR as a result of the saturation of the ISB transition, leading to
where the coupling strength ΩR is
Here, \({\it{\epsilon }}_w\) is the permittivity of the quantum well material, m* is the effective mass of the conduction band electron, LMQW is the thickness of the MQW stack, and ξ represents the field overlap factor, i.e. the overlap of light and matter modes, calculated via the RCWA method. γc and \(\gamma _{{\mathrm{ISB}}} = {\textstyle{1 \over {\tau _{{\mathrm{ISB}}}}}}\) denote the damping constants of the cavity and the ISB system, respectively.
In Eq. (2), ω−ω0 is the detuning of the photon energy from the cavity resonance. The analytic expression of Eq. (2), plugged into Eq. (1), justifies the saturation behaviour observed in Fig. 1e. Indeed, when a narrow-band excitation at a frequency ω0 is considered, the function R(Δn, ω = ω0) has to be employed. This function is not monotonic with respect to ΩR (and, consequently to Δn), hence triggering the observed sharp saturation.
2D THz spectroscopy
Carrier-envelope-phase-stable, single-cycle THz pulses (Supplementary Fig. 1) are generated by optical rectification of near-infrared pulses of a duration of 260 fs from an Yb:KGW amplifier in a cryogenically cooled (77 K) lithium niobate crystal in a tilted pulse-front scheme36. We use a Michelson interferometer with a silicon beamsplitter to separate the generated THz pulses into two identical pulses, delayed with respect to each other by a variable delay time τ. After reflection from the sample, the total THz electric field is detected by electro-optic sampling in a GaP crystal of a thickness of 1 mm with a small portion of the near-infrared light used as a gate pulse.
The origin of the nonlinear pump–probe and four-wave mixing signals from the sample can be understood in terms of third-order nonlinear polarizations. For example, the pump–probe signals at ντ = 0 THz originate from polarization components
whereby ν represents the absorption of a photon, while −ν represents the emission of a photon into the respective field component. In this particular case, one photon is absorbed from field A while for field B, one photon is absorbed and a second one is emitted, such that the process is incoherent with respect to the phase of field B and called a pump–probe process. In contrast, a coherent four-wave mixing nonlinearity as
preserves the phases of both fields, A and B. In conclusion, pump–probe processes are a measure of the incoherent population of the ISB system, while four-wave mixing processes represent the coherent nonlinear polarization. Moreover, a convenient graphical representation is obtained when the 2D frequency plots of Fig. 3c, d (see also Supplementary Fig. 4) are traversed along a path of wave vectors, called a Liouville path. Each vector represents one photon of the incident fields contributing to the above third-order nonlinear polarization37. Correspondingly, each location (νt, ντ) in 2D frequency space can be reached by an integer linear combination of the wave vectors kA = (νISB, 0) and kB = (νISB, −νISB) with non-zero coefficients. For example, the signals at kPP1 = (νISB, 0) and kPP2 = (νISB, −νISB) are represented by Liouville paths kPP1 = kA + kB − kB and kPP2 = kA − kA + kB, respectively. As in these cases, the phase of either pulse B (for kPP1) or pulse A (for kPP2) cancels, the processes describe pump–probe interactions. In contrast, the coherent four-wave mixing signals at k4WM1 = (νISB, νISB) and k4WM2 = (νISB, −2νISB) can be expanded as k4WM1 = kA + kA − kB and k4WM2 = kB + kB − kA, conserving the phases of both fields.
Microscopic calculation of polaritonic dynamics
We model the dynamic response of our structure under intense THz excitation by a semiclassical theory of ultrastrong light–matter interaction. The Hamiltonian reads38
Here, \(\hat H_{{\mathrm{ISB}}} = \hbar \omega _{{\mathrm{ISB}}}\hat b^\dagger \hat b\), and \(\hat H_{{\mathrm{cav}}} = \hbar \omega _{{\mathrm{cav}}}\hat a^\dagger \hat a\) account for the ISB polarization field and the cavity field, respectively. \(\hat b\) and \(\hat a\) denote the corresponding annihilation operators. Light–matter interaction is implemented including anti-resonant interaction terms, leading to \(\hat H_{{\mathrm{int}}} = \hbar {{\mathrm{\Omega} }_{\mathrm{R}}}( {\hat b + \hat b^\dagger } )\left( {\hat a + \hat a^\dagger } \right) + \hbar D\left( {\hat a + \hat a^\dagger } \right)^2\), where ΩR is the vacuum Rabi frequency. While anti-resonant contributions may be neglected for low coupling strengths 2ΩR/ω0 << 1 and weak excitation, here, we model a situation of 2ΩR/ω0 = 0.12 and strong excitation by single-cycle pulses with peak electric fields of several kV cm−1, which requires these light–matter interaction terms to be included. We note that the diamagnetic shift of the cavity, \(D = {\Omega}_{\mathrm{R}}^2/\omega _0\), is small in our case and could be neglected, in principle. However, since it originates from the same formalism as the anti-resonant light–matter interaction terms and would have to be included for the discussed scenarios of larger coupling strengths, we have kept it in the theory. The excitation of the cavity mode by the external field is contained in \(\hat H_{e{\mathrm{xt}}}\). We calculate the dynamics of the cavity and polarization fields using Heisenberg’s equation of motion in the mean-field limit, where \(\alpha (t) = \langle \hat a(t) \rangle\) and \(\beta (t) = \langle \hat b(t) \rangle\). We obtain the equation of motion for α
where we introduced the phenomenological damping constant γc of the resonator. The driving term \({\mathcal{E}}\)(t) represents the external electric field of the incident THz transient.
The ISB transition is modelled as an ideal two-level system, which can be well described in terms of a density matrix \(\rho = \left( {\begin{array}{*{20}{c}} {\rho _{11}} & {\rho _{12}} \\ {\rho _{21}} & {\rho _{22}} \end{array}} \right)\), where ρ11 (ρ22) is the population of the first (second) subband, and \(\rho _{12} = \rho _{21}^ \ast\) is the ISB polarization. Applying the von Neumann equation we calculate the time derivatives of the individual matrix elements as
These coupled differential equations are solved numerically, where the constants ω0, γISB, γc, and ΩR are determined from the linear characterization of the sample. The reflection spectra in Fig. 2c are then calculated by a superposition of the incident electric field \({\mathcal{E}}\)(t) and the cavity field α(t). The nonlinear response αNL(t, τ) is determined by calculating the response αAB(t, τ) for a driving field \({\mathcal{E}}\)AB(t, τ) = \({\mathcal{E}}\)A(t) + \({\mathcal{E}}\)B(t − τ) and subtracting the individual contributions α(t) and α(t, τ) for driving fields \({\mathcal{E}}\)A(t, τ) = \({\mathcal{E}}\)A(t) and \({\mathcal{E}}\)B(t, τ) = \({\mathcal{E}}\)B(t − t), respectively.
Polariton dynamics in the high-field regime
In contrast to weak excitation of the sample (see Fig. 3f and “Discussion” section), an increase of the electric peak field by a factor of five leads to an almost complete bleaching of the ISB transition, i.e., a population inversion Δn = n2 − n1 ≈ 0. Consequently, the strong light–matter coupling breaks down, which manifests itself in a monotonic decrease of both the cavity field as well as the population, governed by the coupling to the far field (see Supplementary Fig. 2).
Data availability
The data that support the plots within this paper and other findings of this study are available from the corresponding authors upon reasonable request.
References
Hall, R. N., Fenner, G. E., Kingsley, J. D., Soltys, T. J. & Carlson, R. O. Coherent light emission from GaAs junctions. Phys. Rev. Lett. 9, 366–368 (1962).
Amano, H., Sawaki, N., Akasaki, I. & Toyoda, Y. Metalorganic vapor phase epitaxial growth of a high quality GaN film using an AlN buffer layer. Appl. Phys. Lett. 48, 353–355 (1986).
Quarterman, A. H. et al. A passively mode-locked external-cavity semiconductor laser emitting 60-fs pulses. Nat. Photonics 3, 729–731 (2009).
Faist, J. et al. Quantum cascade laser. Science 264, 553–556 (1994).
Köhler, R. et al. Terahertz semiconductor-heterostructure laser. Nature 417, 156–159 (2002).
Vitiello, M. S., Scalari, G., Williams, B. & de Natale, P. Quantum cascade lasers: 20 years of challenges. Opt. Express 23, 5167–5182 (2015).
Burghoff, D. et al. Terahertz laser frequency combs. Nat. Photonics 8, 462–467 (2014).
Garrasi, K. et al. High dynamic range, heterogeneous, terahertz quantum cascade lasers featuring thermally tunable frequency comb operation over a broad current range. ACS Photonics 6, 73–78 (2019).
Rösch, M., Scalari, G., Beck, M. & Faist, J. Octave-spanning semiconductor laser. Nat. Photonics 9, 42–47 (2015).
Consolino, L. et al. Fully phase-stabilized quantum cascade laser frequency comb. Nat. Commun. 10, 2938 (2019).
Kazakov, D. et al. Self-starting harmonic frequency comb generation in a quantum cascade laser. Nat. Photonics 11, 789–792 (2017).
Jung, S. et al. Broadly tunable monolithic room-temperature terahertz quantum cascade laser sources. Nat. Commun. 5, 4267 (2014).
Lu, Q., Wang, F., Wu, D., Slivken, S. & Razeghi, M. Room temperature terahertz semiconductor frequency comb. Nat. Commun. 10, 2403 (2019).
Yang, X. et al. Lightwave-driven gapless superconductivity and forbidden quantum beats by terahertz symmetry breaking. Nat. Photonics 13, 707–713 (2019).
Schlauderer, S. et al. Temporal and spectral fingerprints of ultrafast all-coherent spin switching. Nature 569, 383–387 (2019).
Reimann, J. et al. Subcycle observation of lightwave-driven Dirac currents in a topological surface band. Nature 562, 396–400 (2018).
Maysonnave, J. et al. Mode-locking of a terahertz laser by direct phase synchronization. Opt. Express 20, 20855–20862 (2012).
Barbieri, S. et al. Coherent sampling of active mode-locked terahertz quantum cascade lasers and frequency synthesis. Nat. Photonics 5, 306–313 (2011).
Wang, F. et al. Generating ultrafast pulses of light from quantum cascade lasers. Optica 2, 944–949 (2015).
Revin, D. G., Hemingway, M., Wang, Y., Cockburn, J. W. & Belyanin, A. Active mode locking of quantum cascade lasers in an external ring cavity. Nat. Commun. 7, 11440 (2016).
Wang, F. et al. Short terahertz pulse generation from a dispersion compensated modelocked semiconductor laser. Laser Photonics Rev. 11, 1700013 (2017).
Mottaghizadeh, A. et al. 5-ps-long terahertz pulses from an active-mode-locked quantum cascade laser. Optica 4, 168–171 (2017).
Keller, U. Recent developments in compact ultrafast lasers. Nature 424, 831–838 (2003).
Hoffmann, M. C. & Turchinovich, D. Semiconductor saturable absorbers for ultrafast terahertz signals. Appl. Phys. Lett. 96, 151110 (2010).
Keiser, G. R., Zhang, J., Zhao, X., Zhang, X. & Averitt, R. D. Terahertz saturable absorption in superconducting metamaterials. J. Opt. Soc. Am. B 33, 2649–2655 (2016).
Bianco, F. et al. THz saturable absorption in turbostratic multilayer graphene on silicon carbide. Opt. Express 23, 11632–11640 (2015).
Bianchi, V. et al. Terahertz saturable absorbers from liquid phase exfoliation of graphite. Nat. Commun. 8, 15763 (2017).
Raab, J. et al. Ultrafast two-dimensional field spectroscopy of terahertz intersubband saturable absorbers. Opt. Express 27, 2248–2257 (2019).
Dini, D., Köhler, R., Tredicucci, A., Biasiol, G. & Sorba, L. Microcavity polariton splitting of intersubband transitions. Phys. Rev. Lett. 90, 116401 (2003).
Todorov, Y. et al. Strong light–matter coupling in subwavelength metal-dielectric microcavities at terahertz frequencies. Phys. Rev. Lett. 102, 186402 (2009).
Kockum, A. F., Miranowicz, A., Liberato, S. D., Savasta, S. & Nori, F. Ultrastrong coupling between light and matter. Nat. Rev. Phys. 1, 19–40 (2019).
Houdré, G. et al. Saturation of the strong-coupling regime in a semiconductor microcavity: free-carrier bleaching of cavity polaritons. Phys. Rev. B 52, 7810–7813 (1995).
Zanotto, S. et al. Ultrafast optical bleaching of intersubband cavity polaritons. Phys. Rev. B 86, 201302 (2012).
Zanotto, S., Bianco, F., Sorba, L., Biasiol, G. & Tredicucci, A. Saturation and bistability of defect-mode intersubband polaritons. Phys. Rev. B 91, 85308 (2015).
Kolarczik, M. et al. Quantum coherence induces pulse shape modification in a semiconductor optical amplifier at room temperature. Nat. Commun. 4, 2953 (2013).
Stepanov, A. G., Hebling, J. & Kuhl, J. Efficient generation of subpicosecond terahertz radiation by phase-matched optical rectification using ultrashort laser pulses with tilted pulse fronts. Appl. Phys. Lett. 83, 3000–3002 (2003).
Kuehn, W., Reimann, K., Woerner, M. & Elsaesser, T. Phase-resolved two-dimensional spectroscopy based on collinear n-wave mixing in the ultrafast time domain. J. Chem. Phys. 130, 164503 (2009).
Ciuti, C., Bastard, G. & Carusotto, I. Quantum vacuum properties of the intersubband cavity polariton field. Phys. Rev. B 72, 115303 (2005).
Acknowledgements
The authors acknowledge financial support from the ERC Project 681379 (SPRINT) and the FET open project ULTRAQCL (665158).
Author information
Authors and Affiliations
Contributions
M.S.V., C.L. and R.H. conceived the core idea of the study. L.L., A.G.D. and E.H.L. performed MBE growth of the MQW sample. F.P.M. and M.S.V. designed and implemented the polaritonic structure. M.S.V. fabricated the QCL structure. N.D. performed numerical RCWA and rate-equation simulations. L.K.D. performed FDFD simulations. F.P.M. carried out the cw characterization of the sample, with the scientific support of L.V., J.R., C.L., and R.H. designed the 2D THz setup, J.R. and C.L. carried out the ultrafast experiments and developed the corresponding semi-classical model. R.H. and M.S.V. supervised the study. All authors analysed the data, discussed the results and contributed to the writing of the manuscript.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Peer review information Nature Communications thanks the anonymous reviewers for their contribution to the peer review of this work.
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Raab, J., Mezzapesa, F.P., Viti, L. et al. Ultrafast terahertz saturable absorbers using tailored intersubband polaritons. Nat Commun 11, 4290 (2020). https://doi.org/10.1038/s41467-020-18004-8
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-020-18004-8
- Springer Nature Limited
This article is cited by
-
Front-induced transitions control THz waves
Communications Physics (2021)
-
Field-resolved high-order sub-cycle nonlinearities in a terahertz semiconductor laser
Light: Science & Applications (2021)