Abstract
Relatively low reactivity hinders using chlorodifluoromethane (ClCF2H) for general difluoromethylation with organic molecules, despite its availability as an inexpensive industrial chemical. To date, transformations of ClCF2H are very limited and most of them involve difluorocarbene intermediate. Here, we describe a strategy for difluoromethylation of aromatics through nickel-catalyzed cross-coupling of ClCF2H with readily accessible (hetero)aryl chlorides. The reaction proceeds under mild reaction conditions with high efficiency and features synthetic simplicity without preformation of arylmetals and broad substrate scope, including a variety of heteroaromatics and commercially available pharmaceuticals. The reliable practicability and scalability of the current nickel-catalyzed process has also been demonstrated by several 10-g scale reactions without loss of reaction efficiency. Preliminary mechanistic studies reveal that the reaction starts from the oxidative addition of aryl chlorides to Ni(0) and a difluoromethyl radical is involved in the reaction, providing a route for applications of ClCF2H in organic synthesis and related chemistry.
Similar content being viewed by others
Introduction
Difluoromethylation of organic molecules using chlorodifluoromethane (ClCF2H), an inexpensive industrial raw material used for production of fluorinated polymers1, represents a cost-efficient and straightforward route to the synthesis of paramount important fluorinated compounds2,3,4,5,6,7,8,9,10,11,12. Its activation and transformation, however, is still of great challenge, due to the strong C–Cl bonding in this gaseous compound. Thus far, most transformation paths of ClCF2H involve the difluorocarbene intermediate. The difluorocarbene species formed through pyrolysis at high temperature or through dehydrochlorination under strong basic conditions has very limited synthetic applications: the former is only applied to produce tetrafluoroethylene (TFE) and related fluorinated polymers (e.g., Teflon)1, and the latter is used to prepare heteroatom-substituted difluoromethylated compounds13,14,15,16. Very recently, we have developed a palladium-catalyzed difluoromethylation of arylborons with ClCF2H, also via a difluorocarbene pathway (Fig. 1a)17. This study has also demonstrated that the activation of ClCF2H by transition metal can be conducted under mild reaction conditions and thus has wide application potential.
For both the practical application and the fundamental research, replacing the palladium catalyst by a first-row-based transition metal catalyst would pave a new and more cost-efficient way for applications of ClCF2H in organic synthesis and medicinal chemistry. Instead of ClCF2H activation, only rare examples of nickel catalyzed difluoroalkylation have been reported for the cross-coupling of difluoroalkyl chloride (ClCF2CO2Et) with nucleophilic arylboronic acids, in which the C–Cl bond is activated by an ester group (CO2Et) adjacent to the difluorocarbon18,19,20. As an inert substrate, the direct cleavage of C–Cl bond in ClCF2H remains a great challenge. Herein, we report a nickel-catalyzed reductive cross-coupling between ClCF2H and aryl chlorides21,22,23,24,25,26,27, representing an alternative strategy for the fluoroalkylation reactions. The reaction proceeds under mild reaction conditions with high efficiency and enables difluoromethylation of a variety of inexpensive and readily accessible aryl chlorides, including heteroaromatics and commercially available pharmaceuticals. The reaction can also extend to aryl bromides. In contrast to the difluorocarbene intermediate involved in the previous palladium-catalyzed process, the current Ni-catalyzed difluoromethylations undergoes a difluoromethyl radical pathway through the direct cleavage of C–Cl bond in ClCF2H.
Results
Optimization of the Ni-catalyzed cross-coupling
We began our studies on nickel-catalyzed reductive cross-coupling between ClCF2H and aryl chlorides (Fig. 1b). The use of aryl chlorides is because of their cheapness, ready availability, and more importantly, we proposed a direct transformation that can avoid the need for preformed arylmetals, such as arylborons and arylzincs. A suitable nickel catalytic system is the key to realize this synthesis route. To date, however, such a nickel catalyzed reductive cross-coupling between organohalides and fluoroalkylated electrophiles has not been reported and remains a challenge, because of the difficulties in selectively controlling the catalytic cycle to suppress the side reactions, such as the formation of hydrodehalogenated and dimerized fluorinated by-products. Although important progresses have been achieved in nickel-catalyzed reductive cross-coupling between aryl halides and unactivated alkyl halides28,29, specific challenges still exist in similar reactions of inert aryl chlorides without substitution by electron-withdrawing groups30, which is subject to the coupling reaction in the current study.
Accordingly, 1-(tert-butyl)-4-chlorobenzene 2a was chosen as the model substrate for this nickel-catalyzed difluoromethylation reaction (Table 1). Without additives, either no reaction or low yields of difluoromethylated arene 3a were observed in most of the experiments. The addition of MgCl231 (1.5 equiv.) benefited the reaction with 16% yield of 3a obtained when the reaction was carried out with NiCl2·DME (10 mol%, DME, dimethoxyethane), bpy L1 (10 mol%, bpy, 2,2′-bipyridine) and Zn (2.0 equiv.) in DMA (dimethylacetamide) at 80 °C (entry 1). But other additives, such as HCl, TMSCl (trimethyl chlorosilane), or DIBAL-H (diisobutyl aluminum hydride) showed no reactivities (Supplementary Table 13). Encouraged by this result, a survey of the reaction parameters, such as ligands, nickel sources, and solvents, was conducted. Unfortunately, no significant improvement of the reaction efficiency was observed (entries 2–4 and Supplementary Tables 1–2). Since a more electron-rich nickel center can benefit the oxidative addition to C–Cl bond, the combination of two electron rich ligands L4 and DMAP (4-dimethylaminopyridine)32,33 provided 3a in 46% yield (entry 5). Other pyridine-based ligands were also examined, but were inferior to DMAP (entries 6–8). Decreasing the reaction temperature to 60 °C with 10 mol% of NiCl2 could improve the yield of 3a to 59% (entry 9). Further optimization of the reaction conditions (Supplementary Tables 4–12) revealed that the addition of 3 Å molecular sieves (MS) in conjunction with NiCl2 (15 mol%) and L4 (10 mol%) could afford 3a in 79% yield (entry 10). In parallel, NiBr2 as an alternative catalyst under the same reaction conditions could also lead to 3a in a comparable yield (entry 11). It should be mentioned that the use of 10 mol% of NiCl2 and 10 mol% of L4 with 3 Å MS could also lead to 3a in a comparable yield (76%) sometimes. But in most of the cases, we obtained the yields of 3a in a range of 46% to 76%. We supposed that the use of excessive NiCl2 vs L4 was probably because a comproportionation occurred between [NiII] and in situ generated [Ni0]. Switching Zn with organic reductant tetrakis(dimethylamino)ethylene (TDAE) led to no 3a (Supplementary Table 14). The absence of nickel or L4 failed to provide 3a either (entries 12 and 13). Thus, these findings demonstrate that Ni/L4 and Zn play an essential role in promotion of the reaction.
Scope of the Ni-catalyzed cross-coupling
With the viable reaction conditions in hand, a variety of aryl chlorides were examined (Table 2). For the electron-neutral aryl chlorides, the use of 10 mol% of NiCl2 and L4 in a low amount as 5 mol% still provided corresponding difluoromethylated arenes in high yields (2b–2d, 2x, and 2y). Although the ortho substituted substrates, such as ortho methyl, fluoride, vinyl and ester substituted phenyl chlorides furnished the difluoromethylated products in lower yields (2e–2g and 2n), they are still synthetically useful for medicinal chemistry to access otherwise unavailable compounds. Aryl chlorides bearing electron-donating substituents were also amenable to the reaction, leading to 3h–3k in moderate to good yields (2h–2k), in which methoxyl group at meta position provided higher yield than that at para position (2i and 2h). Thus, the current nickel-catalyzed process shows the much larger substrate scope than the previous nickel-catalyzed reductive cross-coupling, where the electron-rich and -neutral aryl chlorides have no reaction or only lead to poor yields30. Electron-deficient aryl chlorides were also competent coupling partners, highlighting the generality of this approach (2l–2r). The reaction exhibited good tolerance to functional groups including base or nucleophile-sensitive moieties, such as alkoxycarbonyl and enolizable ketone, and other groups such as vinyl, methylsulfonyl, nitrile, and substituted piperazine (2g, 2l–2t). Remarkably, alcohol and arylboronate did not interfere with the reaction efficiency, and led to compounds 2u–2w in good yields, featuring the advantages of this approach. Furthermore, the reaction can also extend to aryl bromides, both electron-rich and electron-deficient aryl bromides were suitable substrates (2c′, 2i′, and 2l′).
Synthesis of fluorinated heteroaromatic compounds is highly relevant to medicinal chemistry. To our delight, heteroaryl chlorides were also amenable to the current nickel-catalyzed reductive cross-coupling (Table 2). Pyridine-, quinoline-, and benzooxazole-containing substrates all underwent the reaction smoothly, leading to corresponding difluoromethylated heteroarenes in moderate to good yields (4a-4i).
We also examined this protocol for direct difluoromethylation of aryl chloride containing pharmaceuticals, since difluoromethyl group is considered as a bioisostere of hydroxyl and thio groups, and also as a lipophilic hydrogen bond donor34,35 (Table 3). Commercially available drugs such as fenofibrate, clofibrate, chlorodiphenhydramine and sibutramine underwent the current nickel-catalyzed process smoothly and afforded corresponding difluoromethylated products in good yields (6a–6d). The good tolerance of trialkyl amines of this coupling provides a useful route for the modulation of biologically active molecules. N-Heterocycles containing drugs were also viable in the reaction. For instance, clomipramine and buclizine furnished the desired products in good yields (6e and 6f). Although lorcaserin bearing a free amine afforded low yield, the protected N-Boc-lorcaserin led to difluoromethylated arene efficiently (6g). Furthermore, N-heteroaryl containing drug loratadine was also applicable to the cross-coupling and provided 7h in 82% yield (6h). Most importantly, the acetyl protected empagliflozin, a drug used for the treatment of type II diabetes could also provide difluoromethylated product (6i). Although only 25% yield of 7i was obtained, this strategy can trade off the yield for fast synthesis of various interesting new biologically active molecules in the late stage without the need for multi-step parallel synthesis. The rebamipide derivative with unprotected amide bond was also a competent coupling partner (6j). This finding encouraged us to highlight the utility of this protocol further. As shown in 6k, the direct difluoromethylation of protic groups containing drug tolvaptan without protection of hydroxyl and amide bond produced corresponding difluoromethylated product in a yield as high as 92%. Thus, this protocol provides a synthetic simplicity route for the applications in drug discovery and development. Most remarkably, decreasing the loading amount of ClCF2H to 2 equiv. still provided difluoromethylated arenes with high efficiency as demonstrated by the synthesis of compounds 2a, 2h, 2l, 4f (Table 2), and 6k (Table 3), thus demonstrating the advantages of this approach.
To demonstrate the scalability of the current nickel-catalyzed process, several 10-g scale reactions of aryl chlorides were conducted. As shown in Fig. 2a, reaction of ClCF2H with 11.3 g of 4-chloro-1,1′-biphenyl 2c proceeded smoothly under standard reaction conditions, providing 3c in 80% yield. The electron-deficient aryl chloride 2l (11.1g) was also applicable to the reaction and afforded 3l even in a higher yield (74%) (Fig. 2b). Notably, substrate bearing a hydroxyl group (2v) could also furnish its corresponding difluoromethylated product 3v in a much higher yield (90%) (Fig. 2c). Most remarkably, even 10-g scale late stage difluoromethylation of pharmaceutical tolvaptan 6k, a high yield (91%) was still obtained (Fig. 2d). It is also worthy to note that decreasing the loading amount of ClCF2H to 2 equiv. could also lead to difluoromethylated arene without loss of reaction efficiency as shown by 10-g scale reaction of 2v (Fig. 2c), thus demonstrating the good scalability and reliability of this reaction. In light of the wide existence of aryl chloride structural motif in pharmaceuticals and biologically active molecules, this approach would be useful in medicinal chemistry.
Discussion
In the mechanism study of this reaction, we conducted several experiments. Firstly, to rule out the possible generation of difluoromethyl zinc species10,11 in situ between ClCF2H and Zn, we performed control experiments. No difluoromethyl zinc species were observed in the reaction of ClCF2H with Zn in DMA at 60 °C, or even treatment of ClCF2H under standard reaction conditions in the absence of aryl chlorides (Fig. 3a, b). Instead, only starting material ClCF2H was observed after the reaction. We also prepared difluoromethyl zinc species (A1 and A2) by reaction of BrCF2H with Zn in DMA at 60 °C (Supplementary Methods)36; however, no desired product 3c was obtained when these difluoromethyl zinc species were treated with aryl chloride 2c under standard reaction conditions (Fig. 3c). Thus, these results exclude the pathway that the formation of difluoromethylated arenes is derived from the cross-coupling between difluoromethyl zinc species and aryl chlorides. On the basis of the previous reports28,29, we suggest that a nickel-based, reductive cross-coupling catalytic cycle is involved in the reaction.
Secondly, to identify the initiation of current reaction from aryl chloride or ClCF2H, we prepared aryl nickel complex [p-tBu-PhNi(ditBuBpy)Cl] (B1)37 and difluoromethyl nickel complex [HCF2Ni(ditBuBpy)HCF2CO2] (C1)38,39. The structure of C1 was confirmed by X-ray crystallographic analysis (Fig. 4d). To the best of our knowledge, the preparation of difluoromethyl nickel(II) complex has not been reported so far. The use of 4,4′-ditBu-Bpy (L2) instead of 4,4′-diNH2-Bpy (L4) is because of the difficulties in isolation of [Ar-Ni(L4)-Cl] and [CF2H-Ni(L4)-HCF2CO2]. In addition, L2 could also promote the reaction under standard reaction conditions and provided 3a in 39% yield (Fig. 4b). A 15% yield of 3a was provided when B1 was treated with ClCF2H under standard reaction conditions (Fig. 4a). Complex B1 could also serve as a precatalyst and provided 3a in 43% yield, which is comparable with the yield obtained by using NiCl2/ditBuBpy catalytic system (Fig. 4b). However, no 3a was obtained by reaction of difluoromethyl nickel complex C1 with aryl chloride 2a (Fig. 4c), demonstrating that the current reaction is initiated from aryl chloride and the possibility that the reaction starts from the oxidative addition of ClCF2H to Ni(0) is unlikely.
Mechanistic studies. a Reaction of nickel complex B1 with ClCF2H. b B1 or NiCl2/ditBuBpy catalyzed reaction of 2a with ClCF2H. c Reaction of C1 with 2a. d X-ray crystal structure of C1. e Experiments to trap the difluoromethyl radical by reaction of 2c and 8 with ClCF2H. f Reaction of B1 and 8 with ClCF2H. g Reaction of 2a and 8 with C1
We also performed control experiments to gain some mechanistic insights into the reaction further (Fig. 4a). The omission of Zn led to 3a in only 4% yield, implying that an active, low-valent nickel species is needed to promote the catalytic cycle by reduction of Ar-NiII (B1) with Zn. Inspired by the previous report, in which a reduction of Ar-NiII to Ar-NiI by reducing metals was proposed in the nickel-catalyzed coupling of aryl chlorides40, we envisioned that similar pathway may be involved in the reaction. Furthermore, a lower yield (11%) of 3a was provided without MgCl2 (Fig. 4a), indicating that the presence of MgCl2 in current nickel-catalyzed process is probably to facilitate the reduction of nickel(II) complex by Zn to generate active nickel species. However, the exact role of MgCl2 remains elusive. On the other hand, the omission of Zn/MgCl2 could provide 3a in 12% yield (Fig. 4a), suggesting that intermediate B1 reduction is not needed without MgCl2.
Thirdly, to probe whether a difluoromethyl radical existed in the reaction, several radical trapping experiments were conducted. Radical inhibition experiments showed that the reaction could be readily inhibited by addition of electron transfer scavenger 1,4-dinitrobenzene22 or a radical scavenger 2,2,6,6-tetramethyl-1-piperidinyloxy (TEMPO) (Supplementary Table 16). In addition, radical clock experiment showed that a ring-expanded product 9 was formed in 18% yield when ClCF2H was treated with α-cyclopropylstyrene 8 in the presence of aryl chloride 2c under standard reaction conditions (Fig. 4e). However, when a radical scavenger TEMPO was added to the reaction, the reaction was totally inhibited without observation of compounds 9 and 3c (Supplementary Methods). Compound 9 could also be obtained by a stoichiometric reaction of nickel complex B1 with ClCF2H and 8 under standard reaction conditions (Fig. 4f). But difluoromethyl nickel complex C1 failed to provide compound 9 (Fig. 4g), thus ruling out the possible formation of compound 9 from C1 through the Ni-concerted insertion mechanism (Supplementary Fig. 142b). Furthermore, the possibility of formation of compound 9 from aryldifluoromethyl nickel complex Ar-[Ni]-CF2H generated in situ between B1 and ClCF2H is also unlikely, as no ring-opening product 10 was observed by treatment of B1 with ClCF2H and 8 (Fig. 4f and Supplementary Fig. 142c). Therefore, these results suggest that the formation of 9 via a radical pathway (Supplementary Fig. 142a) is reasonable and a difluoromethyl radical species is involved in current catalytic cycle.
Finally, to establish the role of DMAP in the reaction, we prepared nickel complexes [NiCl2(ditBuBpy)] (D1) and [NiCl2(DMAP)4] (D2)27. Both of them could serve as precatalysts and provided 3a in comparable yields (Fig. 5a, b). However, D1 provided 3a in a lower yield (16%) without DMAP (Fig. 5a) and no 3a was observed by using D2 in the absence of ditBuBpy (Fig. 5b). Additionally, a DMAP coordinated nickel complex B2 was observed by reaction of B1 with DMAP, which could also produce 3a in a 15% yield (Fig. 5c). But only 6% yield of 3a was obtained without DMAP (Fig. 5d). These results demonstrate that DMAP can function as a co-ligand to coordinate to the nickel center and thus facilitate the catalytic cycle.
We also performed a Hammett-type analysis of the reaction (Supplementary Fig. 137 and 138). Plots of log(krel) versus σ and σ(−) were linear with moderate quality (R2 ∼ 0.93), and the slope (ρ) was between 1.9 and 2.030,41,42. The ρ values are smaller than those reports on stoichiometric studies of the oxidative addition of aryl halides to Ni (4.4–8.8)43,44, indicating that the oxidative addition of aryl chlorides to Ni(0) is not rate-determining step45. On the basis of these results and previous reports28,29, we propose that the reaction starts from aryl chloride via a radical-cage-rebound process29 (Fig. 6a). An oxidative addition of aryl chloride to Ni(0) initiates the reaction. Subsequently, the resulting nickel(II) complex [Ar-NiII-Cl] (B) is reduced by Zn to generate [Ar-NiI] (E). E undergoes the second oxidative addition with ClCF2H to produce [Ar-NiIII-CF2H] (F) through a cage rebound process, in which a difluoromethyl radical ·CF2H is produced via a single-electron-transfer pathway, subsequently, the resulting ·CF2H rapidly recombines with [Ar-NiII-Cl] to give F. Finally, F undergoes reductive elimination to deliver difluoromethylated arenes and [NiI]. [NiI] is further reduced by Zn to regenerate [Ni0]. Alternatively, a radical chain mechanism28,46 is also possible (Fig. 6b) as the intermediate B1 could also lead to difluoromethylated product without reduction by Zn (Fig. 4a). In this pathway, the ·CF2H generated by reaction of [NiI] with ClCF2H diffuses to the solution to combine with [Ar-NiII-Cl] B to produce F, which undergoes reductive elimination to give difluoromethylated product. Finally, the resulting [NiII] is reduced by Zn to regenerate [Ni0] (Supplementary Fig. 144).
In conclusion, we have developed a practical nickel-catalyzed difluoromethylation of (hetero)aryl chlorides and bromides with abundant and inexpensive ClCF2H, representing a new strategy for fluoroalkylation reactions. The reaction proceeds under mild reaction conditions and can efficiently access a wide range of difluoromethylated (hetero)aromatics, including pharmaceuticals. Comparing to the previous difluoromethylation methods3,4,5,6,7,8,9,10,11,12,17, the current nickel-catalyzed process features several advantages, inexpensive ClCF2H and low-cost nickel catalyst; more accessible and cheaper aryl chlorides as well as no need for preformed arylmetals; broad substrate scope including a variety of heteroaromatics and pharmaceuticals; synthetic simplicity and convenience without prefunctionalization of drugs and biologically active molecules. Particularly, the ability of direct modulation of pharmaceuticals by using ClCF2H provides good opportunities to discover new medicinal agents. The additives MgCl2 and DMAP are critical to the reaction efficiency and DMAP can serve as a co-ligand to facilitate the catalytic cycle. Preliminary mechanistic studies reveal that the reaction starts from the oxidative addition of aryl halides to Ni(0) and a difluoromethyl radical is involved in the reaction, which is in contrast to the previous difluorocarbene pathway, thus paving a new way for applications of ClCF2H in organic synthesis and related chemistry.
Methods
General procedure for the nickel catalyzed cross-coupling
To a 25 mL of Schlenk tube were added aryl chloride 2, 4, or 6 (0.2 mmol, 1.0 equiv.), NiCl2 (10 mol%), L4 (5 mol%), zinc dust (3.0 equiv.), MgCl2 (4.0 equiv.), 3 Å MS (100 mg) and DMAP (20 mol%). The mixture was evacuated and backfilled with argon for three times, DMA (2 mL) and ClCF2H 1 (2.6 M in DMA, 1.3 mmol, 6.5 equiv.) were then added. The Schlenk tube was screw capped and put into a preheated oil bath (60 °C). After stirring for 20 h, the reaction mixture was cooled to room temperature and diluted with ethyl acetate (2 mL). The yield was determined by 19F NMR using fluorobenzene as an internal standard before working up. Then the reaction mixture was filtered with a pad of cellite. The filtrate was washed with brine, extracted with EtOAc for three times. Then the organic layer was dried over Na2SO4 and concentrated. The residue was purified with silica gel chromatography to give product 3, 5, or 7. Isolated yield is based on the average of two runs under identical conditions.
Data availability
The authors declare that all the data supporting the findings of this study are available within the paper and its supplementary information files. CCDC 1572871 contains the supplementary crystallographic data for C1. These data can be obtained free of charge from the Cambridge Crystallographic Data Centre via www.ccdc.cam.ac.uk/data_request/cif.
References
Hudlicky, M. & Pavlath, A. E. Chemistry of Organic Fluorine Compounds II. (American Chemical Society, Washington, DC, 1995).
Wang, J. et al. Fluorine in pharmaceutical industry: fluorine-containing drugs introduced to the market in the last decade (2001-2011). Chem. Rev. 114, 2432–2506 (2014).
Fujikawa, K., Fujioka, Y., Kobayashi, A. & Amii, H. A new method for aromatic difluoromethylation: copper-catalyzed cross-coupling and decarboxylation sequence from aryl iodides. Org. Lett. 13, 5560–5563 (2011).
Fier, P. S. & Hartwig, J. F. Copper-mediated difluoromethylation of aryl and vinyl iodides. J. Am. Chem. Soc. 134, 5524–5527 (2012).
Prakash, G. K. et al. Copper-mediated difluoromethylation of (hetero)aryl iodides and beta-styryl halides with tributyl(difluoromethyl)stannane. Angew. Chem. Int. Ed. 51, 12090–12094 (2012).
Matheis, C., Jouvin, K. & Goossen, L. J. Sandmeyer difluoromethylation of (hetero-)arenediazonium salts. Org. Lett. 16, 5984–5987 (2014).
Fujiwara, Y. et al. A new reagent for direct difluoromethylation. J. Am. Chem. Soc. 134, 1494–1497 (2012).
Gu, Y., Leng, X. & Shen, Q. Cooperative dual palladium/silver catalyst for direct difluoromethylation of aryl bromides and iodides. Nat. Commun. 5, 5405–5412 (2014).
Feng, Z., Min, Q. Q. & Zhang, X. Access to difluoromethylated arenes by Pd-catalyzed reaction of arylboronic acids with bromodifluoroacetate. Org. Lett. 18, 44–47 (2016).
Xu, L. & Vicic, D. A. Direct difluoromethylation of aryl halides via base metal catalysis at room temperature. J. Am. Chem. Soc. 138, 2536–2539 (2016).
Serizawa, H., Ishii, K., Aikawa, K. & Mikami, K. Copper-catalyzed difluoromethylation of aryl iodides with (difluoromethyl)zinc reagent. Org. Lett. 18, 3686–3689 (2016).
Miao, W. et al. Iron-catalyzed difluoromethylation of arylzincs with difluoromethyl 2-pyridyl sulfone. J. Am. Chem. Soc. 140, 880–883 (2018).
Hine, J. & Porter, J. J. Methylene derivatives as intermediates in polar reactions. VIII. Difluoromethylene in the reaction of chlorodifluoromethane with sodium methoxide. J. Am. Chem. Soc. 79, 5493–5496 (1957).
Miller, T. G. & Thanassi, J. W. The preparation of aryl difluoromethyl ethers. J. Org. Chem. 25, 2009–2012 (1960).
Moore, G. G. I. Fluoroalkanesulfonyl chlorides. J. Org. Chem. 44, 1708–1711 (1979).
Nawrot, E. & Jonczyk, A. Difluoromethyltrialkylammonium salts--their expeditious synthesis from chlorodifluoromethane and tertiary amines in the presence of concentrated aqueous sodium hydroxide. The catalytic process. J. Org. Chem. 72, 10258–10260 (2007).
Feng, Z., Min, Q. Q., Fu, X. P., An, L. & Zhang, X. Chlorodifluoromethane-triggered formation of difluoromethylated arenes catalysed by palladium. Nat. Chem. 9, 918–923 (2017).
Xiao, Y. L., Guo, W. H., He, G. Z., Pan, Q. & Zhang, X. Nickel-catalyzed cross-coupling of functionalized difluoromethyl bromides and chlorides with aryl boronic acids: a general method for difluoroalkylated arenes. Angew. Chem. Int. Ed. 53, 9909–9913 (2014).
Gu, J. W., Min, Q. Q., Yu, L. C. & Zhang, X. Tandem difluoroalkylation-arylation of enamides catalyzed by nickel. Angew. Chem. Int. Ed. 55, 12270–12274 (2016).
Shi, S. L. & Buchwald, S. L. Palladium-catalyzed intramolecular C-H difluoroalkylation: synthesis of substituted 3,3-difluoro-2-oxindoles. Angew. Chem. Int. Ed. 54, 1646–1650 (2015).
Zhou, Q.-L. & Huang, Y.-Z. Direct fluoroalkylation of aromatic compounds catalyzed by tetrakis(triphenylphosphine)nickel. J. Fluor. Chem. 43, 385–392 (1989).
Huang, X.-T. & Chen, Q.-Y. Nickel(0)-catalyzed fluoroalkylation of alkenes, alkynes, and aromatics with perfluoroalkyl chlorides. J. Org. Chem. 66, 4651–4656 (2001).
Schwaebe, M. K., McCarthy, J. R. & Whitten, J. P. Nickel(0)-catalyzed coupling of vinylzirconiums to α-bromo-α,α-difluoro esters. Convenient generation of a functionalized allyldifluoro moiety. Tetrahedron Lett. 41, 791–794 (2000).
Liang, Y. & Fu, G. C. Catalytic asymmetric synthesis of tertiary alkyl fluorides: Negishi cross-couplings of racemic alpha,alpha-dihaloketones. J. Am. Chem. Soc. 136, 5520–5524 (2014).
Liang, Y. & Fu, G. C. Catalytic asymmetric synthesis of tertiary alkyl fluorides: Negishi cross-couplings of racemic alpha,alpha-dihaloketones. J. Am. Chem. Soc. 136, 5520–5524 (2014).
Jiang, X., Sakthivel, S., Kulbitski, K., Nisnevich, G. & Gandelman, M. Efficient synthesis of secondary alkyl fluorides via Suzuki cross-coupling reaction of 1-halo-1-fluoroalkanes. J. Am. Chem. Soc. 136, 9548–9551 (2014).
Xiao, Y. L., Min, Q. Q., Xu, C., Wang, R. W. & Zhang, X. Nickel-catalyzed difluoroalkylation of (hetero)arylborons with unactivated 1-bromo-1,1-difluoroalkanes. Angew. Chem. Int. Ed. 55, 5837–5841 (2016).
Weix, D. J. Methods and mechanisms for cross-electrophile coupling of Csp(2) halides with alkyl electrophiles. Acc. Chem. Res. 48, 1767–1775 (2015).
Gu, J., Wang, X., Xue, W. & Gong, H. Nickel-catalyzed reductive coupling of alkyl halides with other electrophiles: concept and mechanistic considerations. Org. Chem. Front. 2, 1411–1421 (2015).
Everson, D. A., Jones, B. A. & Weix, D. J. Replacing conventional carbon nucleophiles with electrophiles: nickel-catalyzed reductive alkylation of aryl bromides and chlorides. J. Am. Chem. Soc. 134, 6146–6159 (2012).
Yin, H., Zhao, C., You, H., Lin, K. & Gong, H. Mild ketone formation via Ni-catalyzed reductive coupling of unactivated alkyl halides with acid anhydrides. Chem. Commun. 48, 7034–7036 (2012).
An, L., Xiao, Y. L., Min, Q. Q. & Zhang, X. Facile access to fluoromethylated arenes by nickel-catalyzed cross-coupling between arylboronic acids and fluoromethyl bromide. Angew. Chem. Int. Ed. 54, 9079–9083 (2015).
Wang, X., Wang, S., Xue, W. & Gong, H. Nickel-catalyzed reductive coupling of aryl bromides with tertiary alkyl halides. J. Am. Chem. Soc. 137, 11562–11565 (2015).
Meanwell, N. A. Synopsis of some recent tactical application of bioisosteres in drug design. J. Med. Chem. 54, 2529–2591 (2011).
Erickson, J. A. & McLoughlin, J. I. Hydrogen bond donor properties of the difluoromethyl group. J. Org. Chem. 60, 1626–1631 (1995).
Burton, D. J. & Hartgraves, G. A. The preparation of HCF2CdX and HCF2ZnX via direct insertion into the carbon halogen bond of CF2HY (Y=Br, I). J. Fluor. Chem. 128, 1198–1215 (2007).
Shields, B. J. & Doyle, A. G. Direct C(sp3)-H Cross coupling enabled by catalytic generation of chlorine radicals. J. Am. Chem. Soc. 138, 12719–12722 (2016).
Maleckis, A. & Sanford, M. S. Synthesis of fluoroalkyl palladium and nickel complexes via decarbonylation of acylmetal species. Organometallics 33, 3831–3839 (2014).
Bour, J. R., Camasso, N. M. & Sanford, M. S. Oxidation of Ni(II) to Ni(IV) with aryl electrophiles enables Ni-mediated aryl-CF3 coupling. J. Am. Chem. Soc. 137, 8034–8037 (2015).
Colon, I. & Kelsey, D. R. Coupling of aryl chlorides by nickel and reducing metals. J. Org. Chem. 51, 2627–2637 (1986).
Cassar, L. & Foà, M. Nickel-catalyzed carbonylation of aromatic halides at atmospheric pressure of carbon monoxide. J. Organomet. Chem. 51, 381–393 (1973).
Saito, S., Oh-tani, S. & Miyaura, N. Synthesis of biaryls via a nickel(0)-catalyzed cross-coupling reaction of chloroarenes with arylboronic acids. J. Org. Chem. 62, 8024–8030 (1997).
Foà, M. & Cassar, L. Oxidative addition of aryl halides to tris(triphenylphosphine)nickel(0). J. Chem. Soc. Dalton Trans. 2572–2576 (1975).
Tsou, T. T. & Kochi, J. K. Mechanism of oxidative addition. Reaction of nickel(0) complexes with aromatic halides. J. Am. Chem. Soc. 101, 6319–6332 (1979).
Weissman, H. & Milstein, D. Highly active PdII cyclometallated imine catalyst for the Suzuki reaction. Chem. Commun. 1901–1902 (1999).
Ren, Q., Jiang, F. & Gong, H. DFT study of the single electron transfer mechanisms in Ni-catalyzed reductive cross-coupling of aryl bromide and alkyl bromide. J. Organomet. Chem. 770, 130–135 (2014).
Acknowledgements
Financial support for this work was provided by the National Natural Science Foundation of China (21425208, 21672238, 21421002, and 21332010), the National Basic Research Program of China (973 Program) (No. 2015CB931900), the Strategic Priority Research Program of the Chinese Academy of Sciences (No. XDB20000000), and SIOC.
Author information
Authors and Affiliations
Contributions
C.X. and W.-H.G. contributed equally to this work. X.Z., C.X., and W.-H.G. conceived and designed the experiments. C.X. and W.-H.G. performed the experiments. C.X. conducted all the mechanism studies. X.H. and X.-Y.Z. prepared some starting materials. Y.-L.G. conducted MS analysis of nickel complexes. C.X. and W.-H.G. analyzed the data. X.Z. wrote the paper. All authors discussed the results and commented on the manuscript.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Additional information
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Xu, C., Guo, WH., He, X. et al. Difluoromethylation of (hetero)aryl chlorides with chlorodifluoromethane catalyzed by nickel. Nat Commun 9, 1170 (2018). https://doi.org/10.1038/s41467-018-03532-1
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-018-03532-1
- Springer Nature Limited
This article is cited by
-
General radical difluoromethylation using difluoroacetic anhydride via photoredox catalysis
Science China Chemistry (2024)
-
Switching from 2-pyridination to difluoromethylation: ligand-enabled nickel-catalyzed reductive difluoromethylation of aryl iodides with difluoromethyl 2-pyridyl sulfone
Science China Chemistry (2023)
-
Nickel-catalyzed alkyl-arylation of 3,3,3-trifluoropropene
Communications Chemistry (2022)
-
Synthesis of aryldifluoromethyl aryl ethers via nickel-catalyzed suzuki cross-coupling between aryloxydifluoromethyl bromides and boronic acids
Communications Chemistry (2022)
-
Enantioselective nickel-catalyzed dicarbofunctionalization of 3,3,3-trifluoropropene
Nature Communications (2022)