Topological states emerge at the boundary of solids as a consequence of the nontrivial topology of the bulk. Recently, theory predicts a topological edge state on single layer transition metal dichalcogenides with 1T’ structure. However, its existence still lacks experimental proof. Here, we report the direct observations of the topological states at the step edge of WTe2 by spectroscopic-imaging scanning tunneling microscopy. A one-dimensional electronic state residing at the step edge of WTe2 is observed, which exhibits remarkable robustness against edge imperfections. First principles calculations rigorously verify the edge state has a topological origin, and its topological nature is unaffected by the presence of the substrate. Our study supports the existence of topological edge states in 1T’-WTe2, which may envision in-depth study of its topological physics and device applications.
Similar content being viewed by others
Introduction
In the two-dimensional (2D) topological insulators (TIs)1, 2, the nontrivial edge state (ES) supports quantum spin Hall (QSH) effect, where the electrons at the edge of the system possess different spins when propagating along opposite directions. This enables the topological ES immune to scattering from non-magnetic impurities as protected by the time-reversal symmetry. Since the early proposal of QSH effect in graphene with spin-orbit coupling3 (SOC), a number of 2D TI systems that are more readily examined by experiments are predicted4. However, only a few of them are confirmed experimentally, including quantum well structures of HgTe5 and InAs6, thin layers of Bi7, Bismuthene8 and FeSe9, as well as the step edges of bulk ZrTe5 10, 11, Bi12, Bi14Rh3I9 13, and (Pb,Sn)Se14.
Recently, a family of 2D TI based on single-layer transition metal dichalcogenides (TMDs) with 1T’ structure is predicted theoretically15. Combining the capability of van der Waals (vdW) stacking, the TMD QSH insulators provide the advantage of multiple edge conduction channels, which is highly desirable for practical device applications. This stimulates intensive research interests in identifying the topological phases in single layer TMDs, especially how to tune the crystal structure into the 1T’ phase16,17,18. Recent experimental achievements have made it possible to grow 1T’-MoTe2 single layers by chemical vapor deposition19 or molecular-beam epitaxy20. Moreover, ultra-thin21 and even single layer22 1T’-WTe2 devices are successfully fabricated with mechanical exfoliation method. Tantalizing evidence of a positive QSH gap and edge conduction signatures are observed with transport measurements21, 22. Particularly, the edge conduction in monolayer WTe2 show several features of topological character, such as suppression with in-plane magnetic field and absence in bilayer systems22. However, the measured conductance does not reach quantum conductance, leaving its assignment as topological origin not conclusive.
WTe2 has the 1T’ structure in its natural ground state and exhibits the largest SOC strength among TMDs. These properties render it the most promising candidate to search for the predicted QSH state15. Moreover, WTe2 is predicted to possess nontrivial topological phases in its bulk as type-II Weyl fermions23. Step edges of the bulk WTe2 offer the interfaces between the WTe2 layer and the vacuum, which are distinct in electronic topology. In this regard, compared with the monolayer WTe2 that is challenging to fabricate, the bulk step edges may be an appealing alternative to examine the potentially hosted topological ES.
For this, we study the electronic states of step edges of WTe2 with spectroscopic imaging scanning tunneling microscopy, which is a powerful probe sensitive to the local density of state (LDOS) with high energy and high spatial resolution. We show the emergence of topological ES residing at step edges of WTe2, which exhibits robustness against edge irregularities. Their topological nature is substantiated by theoretical calculations. Our study paves the way for incorporating bulk properties to the topological ES and developing topological device applications.
Results
Step edge and two surfaces of WTe2
WTe2 has a layered structure with vdW bonding between the layers. Its 1T’ structure originates from a lateral distortion of W atoms towards the b direction of the 1T structure. This creates zigzag chains along the a direction with neighboring chains having different heights (Fig. 1a and Supplementary Fig. 1a). The distortion directions of the adjacent WTe2 layers are opposite. Thus, the top and bottom surfaces are of different type. After cleaving, both surfaces can sometimes co-exist that are separated with single-layer high step edges. Figure 1c shows a STM image of such surfaces with a step. Its zoomed-in image clearly resolves (Fig. 1b) the atomic resolution of the Te atoms of the WTe2 (001) surface, which exhibits alternating bright- and dark-chain structures. Standing wave patterns in the vicinity of the step edges and defects seen in Fig. 1c propagate along the chain direction, reflecting the anisotropic character of the band structure in WTe2. The step height is measured as ~ 0.72 nm, i.e. single layer high WTe2, demonstrating the upper and lower terraces are two different surfaces. Such assignment is augmented by the appearance of defects, which mark the type of surfaces via symmetry. Figure 1d, e show two identical kinds of defects at both surfaces. They point to opposite directions, clearly revealing the two surfaces are different.
Spectra of ES
To unravel its electronic structure, we acquire tunneling spectra (Fig. 2a), which is proportional to the LDOS, along a line perpendicularly across the step edge in the a-direction (Fig. 1c, black line and Fig. 2b). It is seen that the spectra at the inner terraces are spatially homogenous and are identical on both surfaces. Upon approaching the step edge, the tunneling conductance enhances drastically than that of the inner terrace between ~ 50 meV and ~ 130 meV. This indicates the existence of prominent ES. To inspect more details, we extract the spectra obtained at the step edge (Fig. 2c, red line) and at the inner terrace (Fig. 2c, black line). Evidently, the tunneling conductance of the inner terrace has finite value for all energies, consistent with WTe2 being a semi-metal. Its spectroscopic shape is captured nicely with our calculated density of states with density functional theory (Fig. 2d and Supplementary Fig. 1). For the spectroscopy at the step edge, there appear two peaks at ~ 60 meV and 200 meV, respectively. The detailed shape of the ES varies at different locations of the step edge (Supplementary Fig. 2). This implies the atomic geometry of the step edge is not uniform, as is also observed in the topological ES of many other 2D TI systems9,10,11, 13. During cleaving, step edges are formed by breaking the atomic bonds between the WTe2 layers. The resulted edge geometry can exhibit complications such as different atom terminations, local relaxations and reconstructions, etc.
Spatial distribution of topological ES
Next, we did real space spectroscopic mapping to a straight step (Fig. 2e) along the a-direction to clarify the nature of the ES. Remarkably, the ES intensity enhances between ~ 50 meV and 120 meV, and gradually depresses outside the energy window. (Spectroscopic mappings at representative energies are shown in Fig. 2f). The ES is localized precisely along the step edge, revealing its origin and also confirming it is a 1D state. A conductance profile across the ES shows it has a lateral spatial extension of ~ 2.5 nm (Fig. 2g). This is of similar size as the topological ES observed in other systems7,8,9,10,11.
More importantly, scrutiny on an irregular shaped step edge (Fig. 3a) indicates the robustness of the ES. Remarkably, the conductance intensity of the ES exhibits the identical energy dependence (Fig. 3b) and the equal lateral spatial distribution (Fig. 3c) as the straight edge in Fig. 2e. It is noted that the spectroscopic shape of the ES varies at different locations of the irregular step edge (Fig. 3d), resulting in conductance fluctuations of the ES intensity. Nevertheless, the inspected locations entirely exhibit the ES prominently. We have also examined the spectroscopy of defect states and excluded the possibility of the observed ES is defect-induced (Supplementary Note 3).
Discussion
The trivial and nontrivial ES are from very different origins. The trivial ES comes from the termination of atomic lattices, such as that of 2H-MoS2 24. Its spectroscopic feature is closely associated with the specific step direction, and can be scattered by defects. In contrast, the nontrivial ES originates from the nontrivial topology of the bulk and is irrelevant to the detailed shape of the step edges. The ES observed here not only shows robustness to the irregular shape of the step edges, but also exhibits the same energy dependence of conductance intensity and the equal lateral width along the different edge directions (Fig. 2, Fig. 3 and Supplementary Fig. 3). These phenomena can hardly be possible for trivial ES, but are much more likely related to the topological origin of the ES.
A more rigorous evidence of their topological nature is theoretical calculations, which have demonstrated fabulous success in identifying the topological phase of matter. To this end, we perform density-functional calculations. We start with a freestanding monolayer 1T’-WTe2 ribbon by using the tight-binding model constructed from the bulk electronic structure. Its edges are terminated equivalently on both sides (Fig. 4a, inset), where no edge potential and structure relaxation are accounted. The ribbon width is chosen over the infinite limit to exclude hybridizations between the two edges. Both a n-field approach25, 26 and a hybrid Wannier charge center27 (Wilson loop28) method confirm the existence of topological ES (Fig. 4a, b and Supplementary Note 4). As a consequence of the nontrivial topology of the bulk, the existence of the topological ES should be irrelevant to the specific edge geometry. Indeed, our calculation confirms its existence at both b-edge (Supplementary Fig. 5) and differently terminated a-edges (Supplementary Fig. 6) without coexisting trivial ESs. Therefore, this supports the topological nature of the experimentally observed ESs. It is found that the detailed spectroscopic features of the ES alter with different edge terminations (Supplementary Note 5), recalling the experimental observations. (Supplementary Fig. 2).
We then take the edge potential and structure relaxation into account, and calculate a 1T’-WTe2 monolayer ribbon of 62 Å wide with the same edge termination as in Fig. 4a directly with ab initio calculation. We fix the shape of the slab and allow the internal coordinates of every atom to relax. Then, the bulk electronic structure and the ESs are calculated for this relaxed structure. As seen in Fig. 4c, the topological ES are clearly present with an increased energy separation compared with Fig. 4a. This calculated result is qualitatively consistent with ref. 15, despite the details of the band features are different owing to the different edge geometry and exchange potential.
To further evaluate the substrate effect, we consider a monolayer 1T’-WTe2 ribbon of 30 Å width placed on another layer of it with ab initio calculation. After full relaxation, we observe small displacements of the atoms along the edge and a further separation of the edge layer from the substrate. Despite of the presence of the substrate and the induced geometrical relaxation, the ES on the step edge shown in Fig. 4d not only qualitatively but also quantitatively resembles that of the freestanding monolayer edge (Fig. 4c). Furthermore, the charge distribution of the ES locates on the edge of the upper terrace, which substantiates their origin from the edge (Fig. 4e, f) and agrees with the experimental findings in Fig. 2f. This indicates the interlayer coupling does not alter the topological property of the ES owing to the weak coupling nature of the vdW stacking. This may have implications to other layer-stacked topological materials, which promises an abundance of unexplored experimental possibilities. Moreover, bulk WTe2 is predicted to be a type-II Weyl semimetal, which features four small sections of disconnected topological surface Fermi arcs at its (001) surface23. The topological surface Fermi arcs are distinct from the topological ES at the step edge in momentum space, preserving the 1D nature of the topological ES11.
Our study thus not only provides an experimental proof to the topological ES in monolayer WTe2 albeit indirectly, but also expands the accessible scope of such nontrivial states to bulk samples. This is of particular importance for situations where bulk properties are desirably introduced into the system. For instance, bulk WTe2 show superconducting phase transition under pressure29, 30. We have examined theoretically that the topological ES is preserved in the pressure regime where superconductivity of bulk WTe2 coexists (Supplementary Note 6). This renders the step edge of WTe2 a promising system for realizing topological superconductivity9. We envision that multiple conduction channels can be created for device applications by forming step edge arrays through the technologically compatible lithographic patterning technique, which is however hardly feasible for the monolayer, or further growth of nanostripes on WTe2 substrate.
After completion of this manuscript, we became aware of two related works31, 32. Both works report the observation of topological ESs of single layer 1T’-WTe2 grown with molecular beam epitaxy. The conductance of the observed topological ESs also indicates obvious variations as our studies.
Methods
Sample preparations and STM experiments
The experiments were performed with a custom-made Unisoku STM (1300) at 4.4 K33. WTe2 crystals grown by a solid-state reaction were cleaved in situ under ultrahigh vacuum conditions at ~ 77 K. After cleaving, the crystals were transferred quickly to the low temperature STM for subsequent measurements. An electro-chemically etched W wire was used as the STM tip. Prior to measurements, the tip was characterized on a Ag(111) crystal that had been cleaned by several cycles of Ar ion sputtering and annealing. The tunneling spectra were obtained by lock-in detection of the tunneling current with a modulation voltage at 983 Hz feeding into the sample bias.
First principles calculations
The WTe2 monolayer was calculated with density functional theory. The projector-augmented-wave34, 35 method implemented in the Vienna Ab Initio Simulation Package36, 37 was employed with an energy cutoff of 500 eV. The generalized gradient approximation potential38 was used in all calculations. The topological ES was calculated by applying the iterative Green’s function approach39 based on the maximally localized Wannier functions40 obtained through the VASP2WANNIER9041 interfaces in a non-self-consistent calculation with 9 × 9 × 1 k-mesh.
Data availability
The data that support the findings of this study are available from the corresponding authors on reasonable request.
References
Hasan, M. Z. & Kane, C. L. Topological insulators. Rev. Mod. Phys. 82, 3045–3067 (2010).
Qi, X. L. & Zhang, S. C. Topological insulators and superconductors. Rev. Mod. Phys. 83, 105–1110 (2010).
Kane, C. L. & Mele, E. J. Quantum spin Hall effect in graphene. Phys. Rev. Lett. 95, 226801 (2005).
Ren, Y. F., Qiao, Z. H. & Niu, Q. Topological phases in two-dimensional materials: a review. Rep. Prog. Phys. 79, 066501 (2016).
König, M. et al. Quantum spin Hall insulator state in HgTe quantum wells. Science 318, 766–770 (2007).
Knez, I., Du, R. R. & Sullivan, G. Evidence for helical edge modes in inverted InAs/GaSb quantum wells. Phys. Rev. Lett. 107, 136603 (2011).
Yang, F. et al. Spatial and energy distribution of topological edge states in single Bi(111) bilayer. Phys. Rev. Lett. 109, 016801 (2012).
Reis, F. et al. Bismuthene on a SiC substrate: A candidate for a high-temperature quantum spin Hall material. Science 357, 287–290 (2016).
Wang, Z. F. et al. Topological edge states in a high-temperature superconductor FeSe/SrTiO3(001) film. Nat. Mater. 15, 968–973 (2016).
Li, X. B. et al. Experimental observation of topological edge states at the surface step edge of the topological insulator ZrTe5. Phys. Rev. Lett. 116, 176803 (2016).
Wu, R. et al. Evidence for topological edge states in a large energy gap near the step edges on the surface of ZrTe5. Phys. Rev. X 6, 021017 (2016).
Drozdov, I. K. et al. One-dimensional topological edge states of bismuth bilayers. Nat. Phys. 10, 664–669 (2014).
Pauly, C. et al. Subnanometre-wide electron channels protected by topology. Nat. Phys. 11, 338–343 (2015).
Sessi, P. et al. Robust spin-polarized midgap states at step edges of topological crystalline insulators. Science 354, 1269–1273 (2016).
Qian, X. F., Liu, J. W., Fu, L. & Li, J. Quantum spin Hall effect in two-dimensional transition metal dichalcogenides. Science 346, 1344–1347 (2014).
Zhang, C. X. et al. Charge mediated reversible metal–insulator transition in monolayer MoTe2 and WxMo1–xTe2 alloy. ACS Nano 10, 7370–7375 (2016).
Keum, D. H. et al. Bandgap opening in few-layered monoclinic MoTe2. Nat. Phys. 11, 482–486 (2015).
Lin, Y.-C., Dumcenco, D. O., Huang, Y.-S. & Suenaga, K. Atomic mechanism of the semiconducting-to-metallic phase transition in single-layered MoS2. Nat. Nanotech 9, 391–396 (2014).
Naylor, C. H. et al. Monolayer single-crystal 1T’-MoTe2 grown by chemical vapor deposition exhibits weak antilocalization effect. Nano. Lett. 16, 4297–4304 (2016).
Chen, J. et al. Quantum effects and phase tuning in epitaxial hexagonal and monoclinic MoTe2 monolayers. ACS Nano 11, 3282–3288 (2017).
Zheng, F. P. et al. On the quantum spin Hall gap of monolayer 1T’-WTe2. Adv. Mater. 28, 4845–4851 (2016).
Fei, Z. Y. et al. Edge conduction in monolayer WTe2. Nat. Phys. 13, 677–682 (2017).
Soluyanov, A. A. et al. Type-II Weyl semimetals. Nature 527, 495–498 (2015).
Bollinger, M. V. et al. One-dimensional metallic edge states in MoS2. Phys. Rev. Lett. 87, 196803 (2001).
Fu, L. & Kane, C. L. Time reversal polarization and a Z2 adiabatic spin pump. Phys. Rev. B 74, 195312 (2006).
Fukui, T. & Hatsugai, Y. Quantum spin Hall effect in three dimensional materials: lattice computation of Z2 topological invariants and its application to Bi and Sb. J. Phys. Soc. Jpn. 76, 053702 (2007).
Soluyanov, A. A. & Vanderbilt, D. Computing topological invariants without inversion symmetry. Phys. Rev. B 83, 235401 (2011).
Yu, R., Qi, X. L., Bernevig, A., Fang, Z. & Dai, X. Equivalent expression of Z2 topological invariant for band insulators using the non-Abelian Berry connection. Phys. Rev. B 84, 075119 (2011).
Kang, D. F. et al. Superconductivity emerging from a suppressed large magnetoresistant state in tungsten ditellurid. Nat. Commun. 6, 7804 (2015).
Pan, X. C. et al. Pressure-driven dome-shaped superconductivity and electronic structural evolution in tungsten ditelluride. Nat. Commun 6, 7805 (2015).
Tang, S. et al. Realization of Quantum Spin Hall State in Monolayer 1T’-WTe2. Nat. Phys. 13, 683–687 (2017).
Jia, Z. Y. et al. Direct visualization of 2D topological insulator in single-layer 1T’-WTe2. Phys. Rev. B 96, 041108(R) (2017).
Fu, Y. S. et al. Observation of Zeeman effect in topological surface state with distinct material dependence. Nat. Commun. 7, 10829 (2016).
Bloechl, P. E. Projector augmented-wave method. Phys. Rev. B 50, 17953 (1994).
Kresse, G. & Joubert, D. From ultrasoft pseudopotentials to the projector augmented wave method. Phys. Rev. B 59, 1758 (1999).
Kresse, G. & Hafner, J. Ab initio molecular dynamics for liquid metals. Phys. Rev. B 47, 558 (1993).
Kresse, G. & Furthmller, J. Efficiency of ab-initio total energy calculations for metals and semiconductors using a plane-wave basis set. Comput. Mat. Sci. 6, 15 (1996).
Perdew, J. P., Burke, K. & Ernzerhof, M. Generalized gradient approximation made simple. Phys. Rev. Lett. 77, 3865 (1996).
Sancho, M. P. L., Sancho, J. M. L. & Rubio, J. Highly convergent schemes for the calculation of bulk and surface Green functions. J. Phys. F: Met. Phys. 15, 851 (1985).
Mostofi, A. A. et al. wannier90: a tool for obtaining maximally-localised Wannier functions. Comput. Phys. Comm 178, 685 (2008).
Franchini, C. et al. Maximally localized Wannier functions in LaMnO3 within PBE+U, hybrid functionals and partially self-consistent GW: an efficient route to construct ab initio tight-binding parameters for eg perovskites. J. Phys. Condens. Matter 24, 235602 (2012).
Acknowledgements
The authors thank G. Xu, T. Hanaguri, S.-Q. Shen, Z.-W. Zhu, and X. Liu for helpful discussions. This work is funded by the National Key Research and Development Program of China (Grant No. 2017YFA0403501, 2016YFA0401003, 2016YFA0300604), the National Science Foundation of China (Grants No. 11474112, No. 11522431, No. 11474330). G. Li acknowledges the starting grant of ShanghaiTech University.
Author information
Authors and Affiliations
Contributions
L.P. and Y.Y. carried out the experiments with the help of X.Y. and J.-J.X. G.L. did the theoretical calculations. Y.-G.S. and C.-J.Y. grew the WTe2 single crystal. Y.-S.F. supervised the project. Y.-S.F. and G.L. designed the experiment, analyzed the data and wrote the manuscript.
Corresponding authors
Ethics declarations
Competing interests
The authors declare no competing financial interests.
Additional information
Publisher's note: Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Electronic supplementary material
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Peng, L., Yuan, Y., Li, G. et al. Observation of topological states residing at step edges of WTe2 . Nat Commun 8, 659 (2017). https://doi.org/10.1038/s41467-017-00745-8
Received:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41467-017-00745-8
- Springer Nature Limited
This article is cited by
-
A hybrid topological quantum state in an elemental solid
Nature (2024)
-
Boundary modes of a charge density wave state in a topological material
Nature Physics (2024)
-
Investigation of the room-temperature photoelectron spectroscopy of type-II Weyl semimetal candidate WTe2
Tungsten (2023)
-
Electric field-assisted patterning of few-layer MoTe2 by scanning probe lithography
Journal of the Korean Physical Society (2023)
-
Topological current divider in a Chern insulator junction
Nature Communications (2022)