Abstract
Multimode fiber (MMF) lasers are emerging as a remarkable testbed to study nonlinear spatiotemporal physics with potential applications spanning from high energy pulse generation, precision measurement to nonlinear microscopy. The underlying mechanism for the generation of ultrashort pulses, which can be understood as a spatiotempoal dissipative soliton (STDS), in the nonlinear multimode resonators is the spatiotemporal mode-locking (STML) with simultaneous synchronization of temporal and spatial modes. In this review, we first introduce the general principles of STML, with an emphasize on the STML dynamics with large intermode dispersion. Then, we present the recent progress of STML, including measurement techniques for STML, exotic nonlinear dynamics of STDS, and mode field engineering in MMF lasers. We conclude by outlining some perspectives that may advance STML in the near future.
Similar content being viewed by others
Introduction
Solitons are self-sustained particle-like waves that widely exist in nonlinear systems. The inevitable dissipation in real systems leads to the concept of dissipative solitons which rely upon double balance between dispersion and nonlinearity as well as gain and loss (Fig. 1a)1. Optical systems are an excellent testbed to understand soliton dynamics2,3,4,5,6,7,8,9,10,11,12,13,14,15. The formation of temporal dissipative solitons in single-mode fiber (SMF) mode-locked lasers, which lay the foundation of modern ultrafast fiber lasers6, is achieved by synchronization of the longitudinal modes (temporal modes). Simultaneous synchronization of the transverse modes (spatial modes) and the longitudinal modes (temporal modes), i.e., spatiotemporal mode-locking (STML) is receiving growing interests in recent years16,17,18,19,20,21,22,23. Multimode fiber (MMF) lasers constitute a flexible platform to realize STML and spatiotemporal dissipative solitons (STDS, dissipative solitons circulating in nonlinear resonators with dynamics impacted by the spatial dimension).
MMFs were first introduced in 1970s in the very early development of fiber optics. However, they were not widely used for data transmission due to the large intermode dispersion. Recently, they have regained research interests as a possible solution to mode-multiplexed data transmission24,25, as well as a platform for nonlinear optics studies26. Many phenomena including spatiotemporal instability27,28,29, beam self-cleaning30,31,32,33,34,35, conservative multimode solitons36,37,38,39, soliton self-frequency shift40, supercontinuum generation26,35,41,42,43,44, intermode four-wave mixing45,46,47,48, control of nonlinear multimode interactions49 have been demonstrated in MMFs.
MMF lasers can also be used to realize STML and STDSs, which require delicate balance among linear and nonlinear effects, as shown in Fig. 1a. In fact, the feasibility of STML in multi-mode lasers has been proposed as early as the birth of lasers50,51,52. Nevertheless, it is only until 2017 that the first spatiotemporally mode-locked MMF laser was reported16. This work is quite inspiring not only because it confirmed the existence of STML and STDSs in MMF lasers, but also it fueled the study of ultrafast dynamics in dissipative nonlinear multimode systems53.
Subsequent to this milestone, studies on STML have flourished. The advancements include an improved understanding of the STML mechanism18,54, observations of spatiotemporal self-similaritons17, STDS molecules55,56, beam self-cleaning57,58,59 and mode-locking buildup dynamics60,61,62 in MMF lasers, and the realization of all-fiber STML lasers19,63 and mode field engineering in STML MMF lasers64. However, our understanding and control of STDS and STML still significantly fall behind the counterparts in SMF lasers. For example, the large mode area and content should allow the generation of ultrahigh pulse energy in fiber lasers, but the reported STML pulse energy is still lower than large mode area SMF lasers16,65,66 as a reference here. The active mode engineering in MMF lasers to achieve arbitrary mode profiles has not been achieved yet. Optical measurement techniques for spatiotemporal characterization are not very mature and user-friendly, which is also dragging our understanding of STDSs in MMF lasers. With these challenges tackled, MMF lasers can be used in many applications including distance metrology67, laser processing68, nonlinear spectroscopy69, optical tweezing70, and imaging in scattering media71,72.
Therefore, MMF lasers are a frontier for ultrafast optics with both challenges and prospects. More broadly, MMF laser is also a versatile platform to study nonlinear multimode photonics so as to strengthen our ability to manipulate photon behavior in multimode systems with nonlinearity complexity. And there are several review articles on nonlinear multimode photonics53,73,74,75,76; here we focus on STML in MMF lasers. We hope the review can serve as a general introduction of STML progresses and outline some interesting problems to work on in the near future. The review is organized as following. We first introduce the general theory and numerical modeling method of STDS propagation in MMF lasers in Section “Principle of STML”. We also categorized three STML regimes depending on the net intermode dispersion in this section. Section “Nonlinear spatiotemporaldissipative soliton dynamics“ covers the progress of STML including the spatiotemporal measurement techniques, nonlinear dynamics, mode field engineering and possible pathways towards higher pulse energy. Section “Discussions” is devoted to the outlook and conclusion of the review.
Principle of STML
STML MMF lasers are high-dimensional systems. Many complex dynamics can exist in the laser and it is important to draw useful conclusions from rich observations to establish the basic principles for STML and STDSs. We introduce the general principles of STML including its modeling method, mode-locking condition and operation regimes in this section.
Numerical modeling of STML
The STML dynamics in MMF lasers can be modeled by distributed models77 or lumped models16. The (3 + 1) dimensional complex cubic-quintic Ginzburg-Landau equation ((3 + 1)D CGLE) is an example of the distributed model77, where the motion equation of the normalized field envelope ψ(x, y, z, t) is written as,
where the conservative and dissipative terms are listed in the left-hand-side and the right-hand-side of the equation, respectively, and subscripts of ψ represent derivatives. x, y are the transverse coordinates, z is the propagation direction and t is the fast time. D represents the dispersion (positive for anomalous dispersion) and the (x2 + y2)ψ term stands for the refractive index distribution of a graded-index (GRIN) MMF (step-index (STIN) MMF should have a different from); ν and γ are coefficients for the cubic and quintic nonlinearities, respectively. δ, ε, β and μ are the coefficients for linear loss (if negative), nonlinear gain (if positive), spectral filtering and saturation of the nonlinear gain (if negative), respectively. ν, γ, ε and μ are space-related terms. Eq. (1) allows solutions for both stable and pulsating STDSs and can be used to analyze the operation regimes of MMF lasers77.
Equation (1) averages intracavity dynamics within one round trip. In order to study STDS propagation in one round trip, a lumped mode can be used. In this model, STDSs are decomposed into a series of spatial modes and pass discrete cavity components (MMFs, saturable absorber (SA), spectral filter and spatial filter) in sequence, see Fig. 1b. The heart of the model is the generalized multi-mode nonlinear Schrödinger equation (GMMNLSE)41,73,78,79, which was first derived by Poletti and Horak79. In many cases, effects such as self-steepening, Raman scattering and higher-order dispersion can be neglected, while gain/loss must be considered for MMF lasers. Thus, nonlinear propagation in the MMFs of an STML laser can be modeled by an array of GMMNLSEs written as73,80,
where Ap(z, t) is the electric field envelope for mode-p (mode-1 is the fundamental mode and l, m, n stand for mode number too), \({\beta }_{r}^{(p)}(r=0,1,2)\) is the rth order Taylor expansion of the propagation constant for mode-p; g(z) is the saturated gain for the active MMF and is zero for the passive MMFs. To take spectral and spatial dependence of gain into account, signal amplification is computed in the frequency domain as, ∂zA(x, y, z, ω) = g0(ω)Ap(x, y, z, ω)/[2(1 + ∫∣A(x, y, z, t)∣2dt/Isat)], where A(x, y, z, t) = ∑pFp(x, y)Ap(z, t) is the total field of the STDS (not mode-resolved pulse), Fp(x, y) is the transverse mode profile of mode-p and A(x, y, z, ω) is the spectrum of the STDS; g0(ω) and Isat are the small signal gain spectrum and the saturation intensity for the active MMF, respectively16,18. The last term represents the Kerr nonlinearity with n2 being the nonlinear refractive index (n2 = 2.3 × 10−20 m2/W for silica) and \({S}_{plmn}^{K}\) being the inverse of the effective mode area with mode overlap accounted73. The Kerr nonlinearity can bind modal pulses and enable energy exchange among them. To generate 3D ultrashort pulses, a space-dependent and the power-dependent (i.e., SA) is included16,18. Note that SA will change the pulse shape, thus shifting the pulse center position81.
Spatial filtering (or spatial-mode-dependent loss) can also align modal pulse positions for self-consistent propagation16,73. It can be implemented by a pinhole, spatial coupling from free space into fibers or fiber splicing16,18,23. The latter works by offset splicing between identical fibers or splicing between fibers with different core diameters. Such a splicing can not only excite high-order modes but also constitute a spatial filter. This is because many STML lasers used single-mode (or quasi single-mode) gain fibers with a core diameter about 10 μm and passive MMF with a large core diameter (e.g., OM4 or OM1 fibers have core diameters of 50 μm or 62.5 μm, respectively)16,17,22,55,57,81,82,83, and splicing between them causes spatial filtering. Note that the small-mode-area fiber may limit the gain and pulse energy scaling for STML lasers. An n × n matrix M can be used to model the pinhole, fiber splicing or spatial coupling based spatial filters as Aout = MAin, where Ain(Aout) is a n × 1 vector representing the mode-resolved field before (after) coupling. The diagonal elements stand for the intramode loss and the off-diagonal elements of M stand for energy exchange between different modes. Propagation in one round trip completes after passing all the components, and round trip iteration continues till the convergence of an STDS solution.
Both models can be used to analyze STML dynamics, reaching reasonable agreement with measurements; however, the computation complexity is usually high. And quantitative agreement with measurements remains a challenge, considering the difficulty in modeling the high dimensional laser parameters accurately enough.
STDS in MMF lasers
Earlier studies on pulse propagation in single pass MMFs have established the existence of the multimode solitons36,37,38,39. Such multimode solitons are formed when the nonlinearity balances the chromatic dispersion as well as the intermode group velocity dispersion36,37,38 (see also Eq. (2)). They differ from solitons in SMFs as the ultrashort pulses within MMFs are made up of several modal pulses that can have different spectra. STDSs in MMF lasers are also different from light bullets in free space nonlinear systems84,85,86,87, as mode confinement of the MMFs gives limited and discrete spatial modes (i.e., diffraction is naturally counteracted).
The first experimental demonstration of the STDS leveraged the careful designed laser dissipation to realize self-consistent propagation in both time and space domains16 (Fig. 2a). Akin to the all-normal-dispersion SMF lasers where a spectral filter is used to shorten the highly chirped pulses for self-consistent propagation in the time domain88, spatial filter is important to align the modal pulses.
The formation of STDS can be understood by the attractor dissection theory54. This theory is based on the maximum gain (or minimum loss) principle for lasers89 that means an STDS tends to adjust itself to receive higher gain and lower loss. In the attractor dissection theory, different effects and cavity components are simplified as an operator. For example, the nonlinearity can be simplified as an operator to represent the overall Kerr nonlinearity on the intracavity field in one round trip, see Fig. 2b. The other effects including spatiotemporal gain, dispersion, spatiotemporal SA, and spatial and spectral filtering can also be represented by corresponding projection operators. The STDS corresponds to a solution which attains the maximum gain (minimum loss) after many round trip iterations for these operation projections. The path of a laser to reach a steady state can be curved, but the spatiotemporal attractor is usually fixed for a given system. Different operators may have different contribution to the final attracted solution. For example, the MMF laser can be dominated by the spatial filtering effect when having a strong spatial filtering for STML (see the top right panel of Fig. 2b). And the MMF laser may transition from the spatial filter dominated state into a saturable absorber dominated state by adjusting the pinhole size54.
Through the attractor dissection theory, the complex lasing dynamics in a MMF laser can be simplified as an optimization problem to find the highest gain solution. Since the attractor dissection theory only considers the overall effects in the cavity instead of concrete effects by solving the computationally complex GMMNLSE, it reduces the computation complexity greatly. The mode content calculated by this model is in reasonable agreement with the measurements, see the bottom panel of Fig. 2b. Therefore, it can be an efficient theory to understand STML in MMF lasers and paves a way for convenient MMF laser design. However, it is still worth studying concrete roles of different laser cavity components to understand their impact on the STML dynamics in detail. For example, how space-dependent gain saturation and saturable absorption influence the STDS properties. From this perspective, the lumped model introduced in Section. “Numerical modeling of STML” still has its own value.
An interesting question for STDS is how the intermode dispersion is balanced. Different spatial modes propagate with different phase and group velocities in the MMFs. For multimode solitons in a GRIN fiber, weak group velocity difference can be largely balanced by the Kerr effect38,78. For the STDS in GRIN MMFs dominated lasers, the walk-off for mode-resolved pulses (or modal pulses) is relatively small and the Kerr effect can be important to bind them, see body diagrams in Fig. 1b and temporal-domain interpretation in Fig. 1c; and spatial filter also contributes to counteracting weak walk-off in GRIN MMF lasers16,54. When the modal walk-off is large (e.g., in STIN MMF lasers), the Kerr effect cannot bind the modal pulses together and they can walk off strongly. Since walk-off is not balanced by the Kerr nonlinearity, dissipation including SA, spectral and spatial filters should be responsible for compensating the large walk-off (which will be discussed in detail in the next subsection).
STDS under large intermode dispersion
Rare-earth doped GRIN fiber is rare, whereas STIN gain fiber is more commercially mature. Hence, it is a natural question whether STML can be realized in MMF lasers comprising STIN MMFs, which have much larger intermode dispersion than GRIN MMFs. If it is possible, the operation regime of STML can be extended considering the distinct dispersion and nonlinear properties of STIN MMFs, thus richer STDS dynamics can be envisioned. Moreover, the mode area of a STIN MMF tends to be larger than a GRIN MMF, which will lead to higher pulse-energy (Fig. 2c)73. Therefore, there is a strong motivation to investigate STML in MMF lasers comprising STIN MMFs that have larger mode area and intermode dispersion.
Along this line, we demonstrated STML with large intermode dispersion in a MMF laser including a long active STIN MMF18. The STIN MMF introduces large walk-off between spatial modes (for example, ~1 ps/m intermode dispersion between LP01 mode and LP21 mode, versus 0.1 ps/m for typical GRIN MMFs) in the laser. STML can still be observed in the MMF lasers with an STIN gain fiber length up to 0.6 m. The output mode profile can be controlled and a near-LP11-mode output was observed. Besides initializing STML, SA was also found to be important to counteract the large intermode dispersion. Simulations show the relative modal pulse positions between LP01 mode and LP21 mode changed quickly in the STIN gain fiber (Fig. 2d). This walk-off further increased to about 1.5 ps in the passive GRIN MMF. Then, the SA pulls the walk-off back to below 0.5 ps. Finally, the spatial filter resets the pulse position and ensures self-consistent propagation. The role of SA that counteracts walk-off can be understood as following. Taking LP01 mode and LP21 mode for example, before the pulse passing the SA, two modes have different center positions. Space-dependent SA leads to different nonlinear loss for modal pulses and a redistribution of modal energy, shifting the relative position between them (middle panel in Fig. 1c). It should be noted that the walk-off compensation capability of a SA is limited to the pulse width range and worked well for the laser reported in ref. 18. For cavities with larger intermode dispersion, the role of SA is less significant and spatial coupling/filtering plays a more critical role.
By replacing the remaining passive GRIN MMFs with passive STIN MMFs, we have further demonstrated STML in an all STIN MMF laser23. The net intermode dispersion of the all STIN MMF laser (evaluated between the LP01 and the LP11 mode at 1060 nm) is about three times of the above hybrid STIN and GRIN MMF laser18. Experimental and numerical results show that pulses belonging to different modes walk off significantly in the all STIN MMF laser and it is the spatial filtering (implemented by spatial coupling from free space into a MMF; see ‘Spatial coupling’ case in Fig. 1b for illustration) that compensates the large walk-off (Fig. 2e). In short, the all STIN MMF laser can allow a single mother-mode, while the seed for other child-modes for the next round trip comes from the mother-mode (see right panel in Figs. 1c and 2e). Thus, self-consistent propagation can be guaranteed despite the large intermode dispersion. In principle, this mother-child-coupling scheme can enable pulse generation with a single repetition rate in MMF lasers with infinitely large intermode dispersion under an appropriate spatial coupling condition.
Nonlinear spatiotemporal dissipative soliton dynamics
Multimode nonlinear systems allow richer nonlinear interactions than single-mode systems. The additional space dimension inspires new physical pictures and theoretical tools to understand nonlinear dynamics in ultrafast lasers. These nonlinear dynamics can be relatively complicated but is essential to understand ultrashort pulse propagation in high-dimension nonlinear systems and to control STDSs in MMF lasers.
Measurement of spatiotemporal dynamics
For SMF lasers, usually time domain and frequency domain measurements are needed to characterize the mode-locking state. For MMF lasers, the space dimension constitutes a new dimension that needs to be characterized. The early techniques to characterize the STML are spectral filtering and spatial sampling18,55,73. As a signature of STML, the mode profile will change when selecting different portions of the spectrum by spectral filtering, while the spectrum changes when spatially sampling different part of the output beam. These measurements are usually used to validate that the STML state occupies multiple spatial modes16,55,61,81. Nevertheless, they only provide rough estimation of the mode content. More rigorous mode decomposition is needed to understand the mode content quantitatively54,90,91,92,93,94,95,96,97,98,99.
There have been several techniques to deconstruct the multimode optical field and retrieve the mode content90,91,92,93,94,95,96,97,98. One example is the spatially and spectrally (S2) resolved imaging technique, which utilizes propagation in a MMF and intermode dispersion to separate different spatial modes for mode retrieval91. Another technique is the correlation filter method (CFM), see Fig. 3a. To decompose mode-n Un(x, y), the complex fields \({U}_{n}^{* }(x,y),{U}_{1}(x,y)+{U}_{n}(x,y),{U}_{1}(x,y)+i{U}_{n}(x,y)\) are encoded on a spatial light modulator (SLM) in a sequence92,93,100. The corresponding outputs are recorded by a camera and processed to retrieve the power ratio and relative phase of mode-n with respect to mode-1. Other techniques involve measuring the complex amplitude of the multimode field using methods like delay-scanning off-axis digital holography54,94,95,99 (Fig. 3b), as well as the so-called TERMITES101, SEA TADPOLE102 techniques and other variants103. These methods has been successfully used to characterize STDSs from MMF lasers. In particular, delay-scanning off-axis digital holography based mode decomposition has been used to retrieve the mode content and verify the attractor dissection theory54.
However, these methods are relatively complicated. A relatively simple way to decompose modes is to measure the output mode intensity only and decompose the mode by machine learning96,96,97,98. Currently, it can only be used to decompose a relatively small mode number (less than 10 modes)96,96,97,98. More advanced algorithms are needed to implement the mode decomposition for larger mode number cases. All the mentioned methods need a relatively long processing time and not suitable for real-time observation, which is critically important to understand STML dynamics.
3D lightwave dynamics have been measured in real-time by using single-shot imaging techniques such as STRIPED FISH104, STS-CUP105, and CUST106. However, these techniques have a limited number of continuous frames, which hardly measure STDS dynamics over a long time scale. Recently, a beam mapping technique reaching picosecond time resolution was demonstrated to study intrapulse beam self-cleaning dynamics107. However, the mapping relied upon mechanical scanning and is not suitable for real-time observation of non-repetitive events. Speckle-resolved measurements of the multi-mode output can be a relatively simple space-resolved approach to measure non-repetitive STDS dynamics in real-time over a large number of round trips62. The example shown in Fig. 3c used speckle-resolved sampling and dispersive Fourier transform (DFT) technique108 for real-time observation of spectral dynamics for STDSs60,62,109.
However, the SMF-based DFT measurement does not reflect the complete modal components, as the spatial sampling is relatively coarse. Mode-resolved real-time observation of multimode optical fields is still challenging. Here we propose a MMF-based DFT technique for mode-resolved real-time observation of STDS. Mode content can be retained when coupling into the fiber by selecting an appropriate MMF. Since the intermode dispersion is much larger than the chromatic dispersion, MMFs with large intermode dispersion (for example, STIN MMF) can separate spatial modal pulses via intermode dispersion. The output spectrum can be relatively complicated when the MMF is long. Fortunately, neural networks can be used to reconstruct the spectrum110.
In addition to DFT-based real-time spectrum measurement, real-time measurement of the temporal waveforms is also important9,111. Temporal lens, which stretches an ultrashort pulse in the time domain112,113, can enable single-shot measurement of the waveform with femtosecond-level resolution9,111,114,115. This measurement technique can also be used to measure fast-varying temporal dynamics of STDSs in MMF lasers. For example, STDSs under large intermode dispersion and multimode bound states are often not single-peaked, and time lens may be used to measure the formation of these temporal structures.
Another key property of STML lasers that remains to be characterized is the noise performance. High periodicity of the pulse stream (i.e., low timing jitter) is a prerequisite for precise timing and optical frequency comb applications. The ultralow timing jitter of SMF lasers has been used in many applications including optical frequency division for ultralow noise microwave synthesis116,117, timing synchronization and dissemination118 and distance metrology119,120. Whether STML lasers can achieve similar stability remains an open question. Careful measurement of timing jitter in STML using phase noise analyzers as well as the heterodyne121,122 and balanced optical cross-correlator techniques118,123 can reveal the noise property of MMF lasers and pave the way to reduce timing jitter for STDSs. Theoretical work on the noise dynamics is also needed to better understand STML in MMF lasers. By combining the above measurement techniques, we propose a characterization system shown in Fig. 3d, which can enable real-time measurement in the frequency and time domains, as well as static mode decomposition in the space domain and timing jitter analysis.
Spatiotemporal dynamics of STDSs
Using the measurement techniques mentioned above, spatiotemporal dynamics of STDSs can be characterized. Different from conventional solitons (sech-shape), dispersion-managed solitons (Gaussian-shape) and similaritons (parabolic-shape) in SMF lasers, STDS may have structured shapes18,22,99. Unlike SMF lasers, nonlinear intermode interaction leads to energy transfer among spatial modes. Therefore, STDS can have distinct dynamics from the counterpart in SMF lasers. In addition to single-pulse states, multi-pulse states, including harmonic mode-locking and bound states (or STDS molecules)55,56,81 have been observed in MMF lasers. The multi-STDS spatiotemporal characteristics (e.g., pulse separation in a bound state) can be controlled by varying the lasing condition55,56,109,124, see Fig. 4a. Spatially sampled autocorrelation measurements showed that temporal separations of the bound state are the same for pulses spatially sampled at different positions of the output beam, suggesting all the modal pulses are bounded with a uniform pulse separation55 (Fig. 4a).
In SMF lasers, time-varying dissipative soliton dynamics widely exists and helps understand temporal dissipative solitons. For example, mode-locking buildup dynamics125,126, pulsating (breathing) dissipative solitons127,128, soliton explosion129,130 and rogue waves131,132 all add to our understanding of single-mode lasers. Single-shot measurements of these time-varying behaviors have become possible with the use of the DFT and time lens techniques in SMF lasers. Similarly, by employing spatial sampling and the DFT technique, space-resolved STDS dynamics were also measured60,62. During the STML building up, different modes can evolve differently, i.e., reaching the attractor via different routes. Specifically, the evolution patterns during the relaxation oscillation as well as Q-switching states differ from mode to mode. In addition, multiple pulses with different energies can exist in a MMF laser; furthermore, the pulse energy ratio between them can vary for different spatially sampled positions60 (Fig. 4b). Depending on the pump power, reversible Q-switching and STML transition was also observed61. A critical bistability between the multimode Q-switching and STML can also be realized under appropriate cavity spatial coupling and nonlinear polarization rotation states (Fig. 4c). As a possible route towards spatiotemporal chaos, period-doubling bifurcation in STML has also been reported in MMF lasers133. A simple iterative model considering the mode-dependent saturable absorption effect is proposed to understand the role of spatiotemporal SA for the unique spatiotemporal characteristics of period-doubling bifurcation in the MMF laser. Space-dependent STDS explosion has also been observed62, giving new opportunities to understand strange dissipative soliton attractors6 (Fig. 4d).
Mode field engineering
Mode field engineering and wavefront shaping are important to beam self-cleaning33, controlling nonlinear wave interactions49,134 in MMFs. STDSs with engineered mode field may enable many applications including optical storage135, super-resolution imaging136, 3D laser lithography137. These applications can have quite different requirement on the mode profile. Nevertheless, customized mode engineering for STML lasers has not been mature yet.
Since high beam quality is usually needed for applications requiring tightly focused beams (e.g., femtosecond laser processing68, nonlinear spectroscopy69), attaining quasi-fundamental mode in MMF lasers has been a longstanding goal for STML. Beam self-cleaning, that is first observed in single-pass MMFs31, is a promising method to achieve this goal. Several models have been proposed to understand the observed self-cleaning28,31,58,138,139,140. Recently, Rayleigh-Jeans distribution, an analogy to a thermal equilibrium in thermodynamics, was proposed to understand the self-cleaning in GRIN MMFs140. Self-cleaning and a near single-mode output beam have also been reported in STML MMF lasers57, see Fig. 4e. By well designing bandpass filter and fiber length, a low chirp parabolic pulse with near-Gaussian beam quality (M2 ≤ 1.4) was observed in a MMF laser17. This work verifies the possibility to obtain high-power, high-quality beam profile ultrashort pulses from MMF lasers. In addition, Ytterbium absorption, leading to enhanced lose for higher-order modes, could be a possible reason for self-cleaning in active fibers58. It is worth mentioning that combining the gain rate equations with GMMNLSE may contribute to revealing the underlying mechanism.
Another way to control the mode field agilely is to insert an SLM in the laser cavity. For example, an intracavity SLM was used to produce almost single-mode output using the genetic algorithm (but in a continuous wave state)64. Nevertheless, the generation of arbitrary output beam profiles has not been demonstrated yet. Typically, an SLM only encodes the phase of the input. Adding a grating pattern to the phase coding can be used to produce effective amplitude modulation91,141,142. However, this method only works for narrow bandwidth cases, because broadband pulses will experience dispersion induced by the grating pattern, complicating the actual modulation by the SLM. Therefore, it can be challenging to encode both complex phase and amplitude modulation using a phase-only SLM for STML pulses. Moreover, the damage threshold of SLM presents another practical issue. Digital micromirror devices (DMDs) or diffraction optical elements may be used to increase the damage threshold. And a combination of SLM and DMD may enable simultaneous phase and amplitude encoding to control STML in a programmable way. Since spatial control is essential for spatiotemporal focus in scattering media (complex mode will be needed)71,72, such STDSs with programmed beam profile may be used for nonlinear microscopy in scattering samples.
In addition, other optical components like metasurfaces143,144, q-wave plates145 or mode converters146,147 have been integrated into SMF lasers to produce exotic lasing modes. It will be interesting to investigate how these devices can modify the STML dynamics in MMF lasers, which brings new opportunities for transverse mode control and mode engineering148.
Towards higher energy
Modulating a single-mode field outside laser cavities can also produce a mode-engineered field. However, STML offers a potential route towards high pulse energy with engineered beam profile. Nonlinearity is a double-edged sword for pulse energy scaling in fiber lasers. Various nonlinear pulse shaping mechanisms have been developed for SMF lasers149. Conventional soliton fiber lasers typically have pulse energy less than 1 nJ150,151,152; dispersion-managed soliton can be used to increase the pulse energy to above 10 nJ153,154,155,156; self-similar pulse generated in the normal dispersion regime can also generate 10-nJ-level pulses157,158,159; dissipative soliton in the all-normal-dispersion fiber lasers can further increase the energy to several tens of nJ88,160,161,162. Large-mode-area photonic crystal fibers (PCFs) with a low nonlinearity can be used to increase the pulse energy to hundreds of nJ163,164 (but PCFs needs careful maintenance). Recently, PCF-based Mamyshev oscillators have brought the pulse energy in SMF lasers to the μJ regime66.
SMF laser experiments show the accumulated nonlinear phase shift within a laser cavity is usually limited to ~10π165. Given the loose mode confinement and the relatively large mode area of MMFs, which is more robust than large-mode-area PCFs, the single pulse energy in STML can be as high as ~150 nJ16,166. By further increasing mode area of gain fibers and lowering intracavity loss, higher pulse energy could be possible. In addition, the nonlinear pulse shaping toolbox discussed above for SMF lasers has not been fully used for MMF lasers yet. Exciting opportunities should arise by releasing these potentials and μJ-level pulse energy may be available from MMF lasers without external amplification.
Among these possibilities, a promising approach is to bridge Mamyshev oscillators and MMF lasers. It can take advantage of the large mode content and low nonlinearity of MMFs to further enhance the output pulse energy from Mamyshev oscillators. Initial attempt to combine them has led to STML based on Mamyshev regenerators22,83; however, the demonstrated pulse energy is less than 20 nJ in these reports. Higher power may be possible by lowering the cavity loss, e.g., using all-fiber multimode Mamyshev oscillators or using gain fiber with a larger mode volume. Further work is needed to achieve higher pulse energy in MMF Mamyshev oscillators.
As mentioned above, all-fiber designs offer a viable solution to lower losses and increase the output power. Indeed, nonlinear multimode interference (NL-MMI) filter using a SMF-MMF-SMF structure167,168,169 can be used as a spectral and spatial filter for STML in MMF lasers19,63,82,170,171. By precisely tuning the NL-MMI filter, tunable dual-wavelength STML can be realized with two wavelength emissions showing distinct characteristics170. Nearly 500 mW power output with optimally balanced two-color intensities was realized using the NL-MMI for mode-locking in a MMF laser172, which provide a promising synchronous multi-color pulse source for THz-wave generation and Raman scattering spectroscopy173,174. The damage threshold for all-fiber devices needs to be considered for high power applications, but it is promising to realize high power MMF lasers with a compact form factor and high robustness.
Besides beam quality, pulse quality is also important for applications. The envelope of STDSs in MMF lasers may be structured16,18. Similaritons with a parabolic shape and a linear chirp based on pulse propagation in the normal dispersion regime is a feasible approach to obtain high pulse quality175. Such a type of pulse has also been observed in an STML MMF laser with a narrow spectral filter17 (Fig. 4f). Such a combination of good beam quality and pulse quality is compelling and deserves further exploration. Generating energetic STDSs with high pulse quality direct from MMF laser could eliminate the power amplification system and higher intracavity pulse energy can reduce the noise of the pulse stream176. As an aside, continuous wave (CW) emission is observed to coexist with STDSs in MMF lasers16,18, which can be a limiting factor for pulse energy scaling. By increasing the modulation depth of the SA, CW emission can be eliminated83.
Discussions
The presence of the spatial dimension offers great potential to control STDSs. For example, STML lasers emitting in the telecom, visible and mid-infrared bands besides the commonly used 1 micron band can be invaluable for various applications21,177,178. In addition to using other rare-earth-doped MMFs, multi-color emission in STML MMF lasers may be possible by tailoring the intermode phase-matching conditions, as shown in a single-pass MMF (Fig. 5-i)179. Harnessing nonlinear intermode interaction and spectral broadening in MMFs26,27,42,44 to generate ultrabroadband output from STML lasers is another option to cover other emission bands (Fig. 5-ii). The spatial complexity can also be leveraged to generate mode-multiplexed frequency combs from a single MMF laser (Fig. 5-iii). Compared to multi-comb from a single SMF laser cavity180, such multi-comb states can have a larger repetition rate difference (up to 10 kHz may be possible by leveraging multi-mother-modes with a relatively large mode index difference). This large difference is favored for dual- or triple-comb applications, as it can increase the acquisition rates for spectroscopy and ranging181,182. Engineering the mode content of STDSs may enhance the effective gain in the active MMF and boost the pulse energy134 (Fig. 5-iv).
In parallel, STML in coherently pumped passive few-mode fiber cavities has been demonstrated20 (Fig. 5-v). Stokes solitons have also been observed in on-chip silica high-Q microresonators, where the primary and the Stokes pulses occupy different spatial modes183. However, these two pulses are centered at two quite different frequencies (Fig. 5-vi). STDSs sharing a same pump and similar center frequencies remain to be demonstrated in chip-scale microresonators. Different from MMF lasers with active gain, parametric gain in coherently pumped systems can lead to distinct dynamics. Comparing similarities and differences in the two systems may shed new insight into STML.
Mode multiplexing/demultiplexing devices have been widely used in optical communications184,185. Similar devices can also be used in MMF lasers to control spatial modes independently as proposed in ref. 149 (Fig. 5-vii). Such a full control is relatively complicated but is quite promising for agile STDS control, in addition to the potential SLM-based approach discussed in Section “Mode field engineering”. An intermode dispersion management STML cavity has been demonstrated using coupling long-period fiber grating148. Moreover, multicore fiber (MCF) lasers have emerged as a promising candidate for ultrahigh power solid-state lasers186. Mode-locking in them is possible but quite challenging186. Mode-locking dynamics may be impacted by optical coupling between neighboring cores, which differs from spatial mode interaction within one core. Coupling in the space coordinate for MCFs may be controlled by varying the core separations, which may be easier than the above mode-demultiplexing-based STML control. Hence, MCF lasers may be another platform to explore mode-locking dynamics impacted by the space coordinate (Fig. 5-viii).
Intracavity control and advanced measurement techniques (including data-driven and computationally intensive modeling and control techniques187) for multimode optical fields are both highly needed to tailor spatiotemporal pulses from MMF lasers. Their combination can also enable observation of exotic spatiotemporal dynamics (for example the formation of 3D pulses with both the beam profile and the pulse-shape preserved in MMF lasers). The high repetition rates of MMF lasers (thus increasing the single-shot data acquisition rate) and the spatial dimension makes MMF lasers an excellent platform to understand the nonlinear dynamics. These will ultimately add to the fundamentals of laser and light. The engineered output beam may be used to enable novel light-matter interaction experiments.
Such applications would require customized 3D pulses. The customization is a nontrivial and challenging inverse problem for STML lasers complicated by spatial-mode-coupling, nonlinearity, and dissipation in MMF lasers188. On the other hand, engineered beam is not always needed and spatiotemopral coherence can be used as a knob to enable new applications189. The concept of incoherent dissipative solitons has been established in SMF lasers190. With the added spatial dimension, incoherent STDS is also worth investigation. For example, revealing spatial mode interaction and modal energy exchange (resulting in beam profile variation) in soliton explosion and rogue wave states will add to our understanding of STDS. The time-varying beam of incoherent STDSs could be used for speckle-correlation-based imaging191,192 and wavefront shaping193. Low coherence for incoherent STDSs in time, frequency and space domains may also be used in chaotic Lidar194, optical cryptography195 and optical coherence tomography196 where low coherence turns out to be an advantage. Compared to single-mode incoherent dissipative solitons, the added spatial incoherence can offer new opportunities in these scenarios. Hence, spatial mode content and coherence can be engineered towards different objectives. Full spatiotemporal control of STML lasers is not always needed, and some simple yet robust control can be valuable for applications. As an example, a simple fiber shaper has been used for external control of ultrashort pulse mode content and supercontinuum generation in a MMF recently, which proves useful for nonlinear microscopy197.
In summary, we have introduced the fundamentals of STML in MMF lasers in the review. We also summarize the progress of STDS spatiotemporal dynamics and its measurement. As a new type of nonlinear system and ultrafast science testbed, STML fiber lasers have extended the landscape of dissipative soliton physics and are gaining increasing interest. We believe more exotic spatiotemporal phenomena can be observed and harnessed to build better ultrafast lasers with unprecedented spatial complexity. All these developments can help to reveal light behavior and physics in loosely confined waveguides with intermediate nonlinearity. In practice, STDS with engineered spatial mode from MMF laser may be used in micromachining68, nonlinear microscopy71,72,197 and optical tweezing70.
References
Akhmediev, N. & Ankiewicz, A. Dissipative Solitons: from Optics to Biology and Medicine, vol. 751 (Springer Science & Business Media, 2008).
Mollenauer, L. F., Stolen, R. H. & Gordon, J. P. Experimental observation of picosecond pulse narrowing and solitons in optical fibers. Phys. Rev. Lett. 45, 1095–1098 (1980).
Mitschke, F., Mahnke, C. & Hause, A. Soliton content of fiber-optic light pulses. Appl. Sci. 7, 635 (2017).
Kivshar, Y. S. & Agrawal, G. Optical Solitons: from Fibers to Photonic Crystals (Academic press, 2003).
Stegeman, G. I. & Segev, M. Optical spatial solitons and their interactions: universality and diversity. Science 286, 1518–1523 (1999).
Grelu, P. & Akhmediev, N. Dissipative solitons for mode-locked lasers. Nat. Photonics 6, 84–92 (2012).
Purwins, H.-G., Bödeker, H. & Amiranashvili, S. Dissipative solitons. Adv. Phys. 59, 485–701 (2010).
Chen, Z., Segev, M. & Christodoulides, D. N. Optical spatial solitons: historical overview and recent advances. Rep. Prog. Phys. 75, 086401 (2012).
Ryczkowski, P. et al. Real-time full-field characterization of transient dissipative soliton dynamics in a mode-locked laser. Nat. Photonics 12, 221–227 (2018).
Babin, S. A. et al. Multicolour nonlinearly bound chirped dissipative solitons. Nat. Commun. 5, 4653 (2014).
Turitsyn, S. K. et al. Dissipative solitons in fiber lasers. Phys. Uspekhi 59, 642 (2016).
Renninger, W., Chong, A. & Wise, F. Dissipative solitons in normal-dispersion fiber lasers. Phys. Rev. A 77, 023814 (2008).
Bao, C. et al. Observation of Fermi-Pasta-Ulam recurrence induced by breather solitons in an optical microresonator. Phys. Rev. Lett. 117, 163901 (2016).
Kippenberg, T. J., Gaeta, A. L., Lipson, M. & Gorodetsky, M. L. Dissipative kerr solitons in optical microresonators. Science 361, eaan8083 (2018).
Chen, Z. & Segev, M. Highlighting photonics: looking into the next decade. eLight 1, 2 (2021).
Wright, L. G., Christodoulides, D. N. & Wise, F. W. Spatiotemporal mode-locking in multimode fiber lasers. Science 358, 94–97 (2017).
Teğin, U., Kakkava, E., Rahmani, B., Psaltis, D. & Moser, C. Spatiotemporal self-similar fiber laser. Optica. 6, 1412–1415 (2019).
Ding, Y. et al. Spatiotemporal mode-locking in lasers with large modal dispersion. Phys. Rev. Lett. 126, 093901 (2021).
Zhang, H. et al. All-fiber spatiotemporal mode-locking lasers with large modal dispersion. Photonics Res. 10, 483–490 (2022).
Nie, M. et al. Synthesized spatiotemporal mode-locking and photonic flywheel in multimode mesoresonators. Nat. Commun.s 13, 6395 (2022).
Ruan, Q. et al. Visible-wavelength spatiotemporal mode-locked fiber laser delivering 9 ps, 4 nj pulses at 635 nm. Laser Photonics Rev. 2100678 (2022).
Haig, H. et al. Multimode Mamyshev oscillator. Opt. Lett. 47, 46–49 (2022).
Gao, C. et al. All-step-index-fiber spatiotemporally mode-locked laser. Optica 10, 356–363 (2023).
Askarov, D. & Kahn, J. M. Design of transmission fibers and doped fiber amplifiers for mode-division multiplexing. IEEE Photonics Technol. Lett. 24, 1945–1948 (2012).
Antonelli, C., Shtaif, M. & Mecozzi, A. Modeling of nonlinear propagation in space-division multiplexed fiber-optic transmission. J. Lightw. Technol. 34, 36–54 (2015).
Wright, L. G., Christodoulides, D. N. & Wise, F. W. Controllable spatiotemporal nonlinear effects in multimode fibres. Nat. Photonics 9, 306–310 (2015).
Krupa, K. et al. Observation of geometric parametric instability induced by the periodic spatial self-imaging of multimode waves. Phys. Rev. Lett. 116, 183901 (2016).
Wright, L. G. et al. Self-organized instability in graded-index multimode fibres. Nat. Photonics 10, 771–776 (2016).
Teğin, U. & Ortaç, B. Spatiotemporal instability of femtosecond pulses in graded-index multimode fibers. IEEE Photonics Technol. Lett. 29, 2195–2198 (2017).
Liu, Z., Wright, L. G., Christodoulides, D. N. & Wise, F. W. Kerr self-cleaning of femtosecond-pulsed beams in graded-index multimode fiber. Opt. Lett. 41, 3675–3678 (2016).
Krupa, K. et al. Spatial beam self-cleaning in multimode fibres. Nat. Photonics 11, 237–241 (2017).
Guenard, R. et al. Nonlinear beam self-cleaning in a coupled cavity composite laser based on multimode fiber. Opt. Express 25, 22219–22227 (2017).
Deliancourt, E. et al. Wavefront shaping for optimized many-mode kerr beam self-cleaning in graded-index multimode fiber. Opt. Express 27, 17311–17321 (2019).
Deliancourt, E. et al. Kerr beam self-cleaning on the lp 11 mode in graded-index multimode fibers. OSA Contin. 2, 1089–1096 (2019).
Niang, A. et al. Spatial beam self-cleaning and supercontinuum generation with yb-doped multimode graded-index fiber taper based on accelerating self-imaging and dissipative landscape. Opt. Express 27, 24018–24028 (2019).
Hasegawa, A. Self-confinement of multimode optical pulse in a glass fiber. Opt. Lett. 5, 416–417 (1980).
Crosignani, B. & Di Porto, P. Soliton propagation in multimode optical fibers. Opt. Lett. 6, 329–330 (1981).
Renninger, W. H. & Wise, F. W. Optical solitons in graded-index multimode fibres. Nat. Commun. 4, 1719 (2013).
Ahsan, A. S. & Agrawal, G. P. Graded-index solitons in multimode fibers. Opt. Lett. 43, 3345–3348 (2018).
Antikainen, A., Rishøj, L., Tai, B., Ramachandran, S. & Agrawal, G. Fate of a soliton in a high order spatial mode of a multimode fiber. Phys. Rev. Lett. 122, 023901 (2019).
Wright, L. G., Wabnitz, S., Christodoulides, D. N. & Wise, F. W. Ultrabroadband dispersive radiation by spatiotemporal oscillation of multimode waves. Phys. Rev. Lett. 115, 223902 (2015).
Lopez-Galmiche, G. et al. Visible supercontinuum generation in a graded index multimode fiber pumped at 1064 nm. Opt. Lett. 41, 2553–2556 (2016).
Krupa, K. et al. Spatiotemporal characterization of supercontinuum extending from the visible to the mid-infrared in a multimode graded-index optical fiber. Opt. Lett. 41, 5785–5788 (2016).
Eftekhar, M. A. et al. Versatile supercontinuum generation in parabolic multimode optical fibers. Opt. Express 25, 9078–9087 (2017).
Essiambre, R.-J. et al. Experimental investigation of inter-modal four-wave mixing in few-mode fibers. IEEE Photonics Technol. Lett. 25, 539–542 (2013).
Nazemosadat, E., Pourbeyram, H. & Mafi, A. Phase matching for spontaneous frequency conversion via four-wave mixing in graded-index multimode optical fibers. J. Opt. Soc. Am. B 33, 144–150 (2016).
Dupiol, R. et al. Far-detuned cascaded intermodal four-wave mixing in a multimode fiber. Opt. Lett. 42, 1293–1296 (2017).
Bendahmane, A. et al. Seeded intermodal four-wave mixing in a highly multimode fiber. J. Opt. Soc. Am. B 35, 295–301 (2018).
Tzang, O., Caravaca-Aguirre, A. M., Wagner, K. & Piestun, R. Adaptive wavefront shaping for controlling nonlinear multimode interactions in optical fibres. Nat. Photonics 12, 368–374 (2018).
Auston, D. Transverse mode locking. IEEE J. Quantum Electron. 4, 420–422 (1968).
Smith, P. W. Simultaneous phase-locking of longitudinal and transverse laser modes. Appl. Phys. Lett. 13, 235–237 (1968).
Haus, H. Mode-locking of lasers. IEEE J. Sel. Top. Quantum Electron. 6, 1173–1185 (2000).
Wright, L. G., Renninger, W. H., Christodoulides, D. N. & Wise, F. W. Nonlinear multimode photonics: nonlinear optics with many degrees of freedom. Optica 9, 824–841 (2022).
Wright, L. G. et al. Mechanisms of spatiotemporal mode-locking. Nat. Phys. 16, 565–570 (2020).
Qin, H., Xiao, X., Wang, P. & Yang, C. Observation of soliton molecules in a spatiotemporal mode-locked multimode fiber laser. Opt. Lett. 43, 1982–1985 (2018).
Guo, T. et al. All fiber spatiotemporal mode-locked fiber laser at 1.55 μm delivering multimode conventional solitons or bound solitons. Opt. Laser Technol. 152, 108093 (2022).
Tegin, U., Rahmani, B., Kakkava, E., Psaltis, D. & Moser, C. Single-mode output by controlling the spatiotemporal nonlinearities in mode-locked femtosecond multimode fiber lasers. Adv. Photon. 2, 056005 (2020).
Chen, Y.-H., Haig, H., Wu, Y., Ziegler, Z. & Wise, F. Accurate modeling of ultrafast nonlinear pulse propagation in multimode gain fiber. J. Opt. Soc. Am. B 40, 2633–2642 (2023).
Zhang, H. et al. Investigation of high-power spatiotemporal mode-locking with high beam quality. Laser Photonics Rev. 17, 2300017 (2023).
Liu, K. et al. Buildup dynamics of multiple solitons in spatiotemporal mode-locked fiber lasers. Photonics Res. 9, 1898–1906 (2021).
Liu, K., Xiao, X. & Yang, C. Observation of transition between multimode q-switching and spatiotemporal mode locking. Photonics Res. 9, 530–534 (2021).
Guo, Y. et al. Real-time multispeckle spectral-temporal measurement unveils the complexity of spatiotemporal solitons. Nat. Commun. 12, 67 (2021).
Teğin, U., Rahmani, B., Kakkava, E., Psaltis, D. & Moser, C. All-fiber spatiotemporally mode-locked laser with multimode fiber-based filtering. Opt. Express 28, 23433–23438 (2020).
Wei, X., Jing, J. C., Shen, Y. & Wang, L. V. Harnessing a multi-dimensional fibre laser using genetic wavefront shaping. Light Sci. Appl. 9, 1–10 (2020).
Liu, Z., Ziegler, Z. M., Wright, L. G. & Wise, F. W. Megawatt peak power from a Mamyshev oscillator. Optica 4, 649–654 (2017).
Liu, W. et al. Femtosecond Mamyshev oscillator with 10-MW-level peak power. Optica 6, 194–197 (2019).
Na, Y. et al. Massively parallel electro-optic sampling of space-encoded optical pulses for ultrafast multi-dimensional imaging. Light Sci. Appl. 12, 44 (2023).
Sugioka, K. Progress in ultrafast laser processing and future prospects. Nanophotonics 6, 393–413 (2017).
Lomsadze, B. & Cundiff, S. T. Frequency combs enable rapid and high-resolution multidimensional coherent spectroscopy. Science 357, 1389–1391 (2017).
Sokolovskii, G. S. et al. 3d laser nano-printing on fibre paves the way for super-focusing of multimode laser radiation. Sci. Rep. 8, 14618 (2018).
Aulbach, J., Gjonaj, B., Johnson, P. M., Mosk, A. P. & Lagendijk, A. Control of light transmission through opaque scattering media in space and time. Phys. Rev. Lett. 106, 103901 (2011).
Katz, O., Small, E., Bromberg, Y. & Silberberg, Y. Focusing and compression of ultrashort pulses through scattering media. Nat. Photon. 5, 372–377 (2011).
Wright, L. G. et al. Multimode nonlinear fiber optics: massively parallel numerical solver, tutorial, and outlook. IEEE J. Sel. Top. Quantum Electron. 24, 1–16 (2017).
Krupa, K. et al. Multimode nonlinear fiber optics, a spatiotemporal avenue. APL Photonics 4, 110901 (2019).
Kartashov, Y. V., Astrakharchik, G. E., Malomed, B. A. & Torner, L. Frontiers in multidimensional self-trapping of nonlinear fields and matter. Nat. Rev. Phys. 1, 185–197 (2019).
Wright, L. G., Wu, F. O., Christodoulides, D. N. & Wise, F. W. Physics of highly multimode nonlinear optical systems. Nat. Phys. 18, 1018–1030 (2022).
Mayteevarunyoo, T., Malomed, B. A. & Skryabin, D. V. Spatiotemporal dissipative solitons and vortices in a multi-transverse-mode fiber laser. Opt. Express 27, 37364–37373 (2019).
Wright, L. G., Renninger, W. H., Christodoulides, D. N. & Wise, F. W. Spatiotemporal dynamics of multimode optical solitons. Optics Express 23, 3492–3506 (2015).
Poletti, F. & Horak, P. Description of ultrashort pulse propagation in multimode optical fibers. J. Opt. Soci. Am. B 25, 1645–1654 (2008).
Ziegler, Z. Numerical Tools for Optical Pulse Propagation in Multimode Fiber. Ph.D. thesis (Cornell University, 2017).
Ding, Y., Xiao, X., Wang, P. & Yang, C. Multiple-soliton in spatiotemporal mode-locked multimode fiber lasers. Opt. Express 27, 11435–11446 (2019).
Wu, H. et al. Pulses with switchable wavelengths and hysteresis in an all-fiber spatio-temporal mode-locked laser. Appl. Phys. Express 13, 022008 (2020).
Cao, B. et al. Self-starting spatiotemporal mode-locking using Mamyshev regenerators. Opt. Lett. 47, 4584–4587 (2022).
Chiao, R. Y., Garmire, E. & Townes, C. H. Self-trapping of optical beams. Phys. Rev. Lett. 13, 479–482 (1964).
Aitchison, J. S. et al. Experimental observation of spatial soliton interactions. Opt. Lett. 16, 15–17 (1991).
Liu, X., Qian, L. & Wise, F. Generation of optical spatiotemporal solitons. Phys. Rev. Lett. 82, 4631 (1999).
Renninger, W. H. & Wise, F. W. Spatiotemporal soliton laser. Optica 1, 101–104 (2014).
Chong, A., Buckley, J., Renninger, W. & Wise, F. All-normal-dispersion femtosecond fiber laser. Optics Express 14, 10095–10100 (2006).
Haken, H. Laser Light Dynamics, Vol. 2 (North-Holland Amsterdam, 1985).
Pinnell, J. et al. Modal analysis of structured light with spatial light modulators: a practical tutorial. J. Opt. Soc. Am. A 37, C146–C160 (2020).
Nicholson, J., Yablon, A. D., Ramachandran, S. & Ghalmi, S. Spatially and spectrally resolved imaging of modal content in large-mode-area fibers. Opt. Express 16, 7233–7243 (2008).
Kaiser, T., Flamm, D., Schröter, S. & Duparré, M. Complete modal decomposition for optical fibers using cgh-based correlation filters. Opt. Express 17, 9347–9356 (2009).
Ma, Y. et al. Fiber-modes and fiber-anisotropy characterization using low-coherence interferometry. Appl. Phys. B 96, 345–353 (2009).
Zhu, P., Jafari, R., Jones, T. & Trebino, R. Complete measurement of spatiotemporally complex multi-spatial-mode ultrashort pulses from multimode optical fibers using delay-scanned wavelength-multiplexed holography. Opt. Express 25, 24015–24032 (2017).
Shapira, O., Abouraddy, A. F., Joannopoulos, J. D. & Fink, Y. Complete modal decomposition for optical waveguides. Phys. Rev. Lett. 94, 143902 (2005).
An, Y. et al. Deep learning-based real-time mode decomposition for multimode fibers. IEEE J. Sel. Top. Quantum Electron. 26, 1–6 (2020).
Brüning, R., Gelszinnis, P., Schulze, C., Flamm, D. & Duparré, M. Comparative analysis of numerical methods for the mode analysis of laser beams. Appl. Opt. 52, 7769–7777 (2013).
An, Y. et al. Learning to decompose the modes in few-mode fibers with deep convolutional neural network. Opt. Express 27, 10127–10137 (2019).
Wu, Y., Christodoulides, D. N. & Wise, F. W. Multimode nonlinear dynamics in spatiotemporal mode-locked anomalous-dispersion lasers. Opt. Lett. 47, 4439–4442 (2022).
Gervaziev, M. et al. Mode decomposition of multimode optical fiber beams by phase-only spatial light modulator. Laser Phys. Lett. 18, 015101 (2020).
Pariente, G., Gallet, V., Borot, A., Gobert, O. & Quéré, F. Space–time characterization of ultra-intense femtosecond laser beams. Nat. Photonics 10, 547–553 (2016).
Bowlan, P., Gabolde, P. & Trebino, R. Directly measuring the spatio-temporal electric field of focusing ultrashort pulses. Opt. Express 15, 10219–10230 (2007).
Miranda, M. et al. Spatiotemporal characterization of ultrashort laser pulses using spatially resolved fourier transform spectrometry. Opt. Lett. 39, 5142–5145 (2014).
Gabolde, P. & Trebino, R. Single-shot measurement of the full spatio-temporal field of ultrashort pulses with multi-spectral digital holography. Opt. Express 14, 11460–11467 (2006).
Jing, J. C., Wei, X. & Wang, L. V. Spatio-temporal-spectral imaging of non-repeatable dissipative soliton dynamics. Nat. Commun. 11, 2059 (2020).
Lu, Y., Wong, T. T., Chen, F. & Wang, L. Compressed ultrafast spectral-temporal photography. Phys. Rev. Lett. 122, 193904 (2019).
Leventoux, Y. et al. 3d time-domain beam mapping for studying nonlinear dynamics in multimode optical fibers. Opt. Lett. 46, 66–69 (2021).
Goda, K. & Jalali, B. Dispersive fourier transformation for fast continuous single-shot measurements. Nat. Photonics 7, 102–112 (2013).
Guo, Y. et al. Unveiling the complexity of spatiotemporal soliton molecules in real time. Nat. Commun. 14, 2029 (2023).
Liu, Z. et al. All-fiber high-speed image detection enabled by deep learning. Nat. Communications 13, 1433 (2022).
Li, B., Huang, S.-W., Li, Y., Wong, C. W. & Wong, K. K. Panoramic-reconstruction temporal imaging for seamless measurements of slowly-evolved femtosecond pulse dynamics. Nat. Commun. 8, 61 (2017).
Foster, M. A. et al. Silicon-chip-based ultrafast optical oscilloscope. Nature 456, 81–84 (2008).
Salem, R., Foster, M. A. & Gaeta, A. L. Application of space–time duality to ultrahigh-speed optical signal processing. Adv. Opt. Photonics 5, 274–317 (2013).
Suret, P. et al. Single-shot observation of optical rogue waves in integrable turbulence using time microscopy. Nat. Commun. 7, 13136 (2016).
Närhi, M. et al. Real-time measurements of spontaneous breathers and rogue wave events in optical fibre modulation instability. Nat. Commun. 7, 13675 (2016).
Fortier, T. M. et al. Generation of ultrastable microwaves via optical frequency division. Nat. Photonics 5, 425–429 (2011).
Xie, X. et al. Photonic microwave signals with zeptosecond-level absolute timing noise. Nat. Photonics 11, 44–47 (2017).
Xin, M., Şafak, K. & Kärtner, F. X. Ultra-precise timing and synchronization for large-scale scientific instruments. Optica 5, 1564–1578 (2018).
Coddington, I., Swann, W. C., Nenadovic, L. & Newbury, N. R. Rapid and precise absolute distance measurements at long range. Nat. Photonics 3, 351–356 (2009).
Na, Y. et al. Ultrafast, sub-nanometre-precision and multifunctional time-of-flight detection. Nat.e Photonics 14, 355–360 (2020).
Hou, D., Lee, C.-C., Yang, Z. & Schibli, T. Timing jitter characterization of mode-locked lasers with <1 zs/√hz resolution using a simple optical heterodyne technique. Opt. Lett. 40, 2985–2988 (2015).
Kwon, D. et al. Reference-free, high-resolution measurement method of timing jitter spectra of optical frequency combs. Sci. Rep. 7, 1–9 (2017).
Kim, J., Chen, J., Cox, J. & Kärtner, F. X. Attosecond-resolution timing jitter characterization of free-running mode-locked lasers. Opt. Lett. 32, 3519–3521 (2007).
Guo, T. et al. Observation of complex multimode soliton molecules in spatiotemporal mode-locked er-doped fiber laser. Opt. Commun. 524, 128773 (2022).
Herink, G., Jalali, B., Ropers, C. & Solli, D. R. Resolving the build-up of femtosecond mode-locking with single-shot spectroscopy at 90 mhz frame rate. Nat. Photon. 10, 321–326 (2016).
Liu, X. & Cui, Y. Revealing the behavior of soliton buildup in a mode-locked laser. Adv. Photon. 1, 016003 (2019).
Peng, J., Boscolo, S., Zhao, Z. & Zeng, H. Breathing dissipative solitons in mode-locked fiber lasers. Sci. Adv. 5, eaax1110 (2019).
Cao, B. et al. Observation of pulsating dissipative solitons in a Mamyshev oscillator. Phys. Rev.A 106, 023519 (2022).
Cundiff, S. T., Soto-Crespo, J. M. & Akhmediev, N. Experimental evidence for soliton explosions. Phys. Rev. Lett. 88, 073903 (2002).
Runge, A. F., Broderick, N. G. & Erkintalo, M. Observation of soliton explosions in a passively mode-locked fiber laser. Optica 2, 36–39 (2015).
Lecaplain, C., Grelu, P., Soto-Crespo, J. & Akhmediev, N. Dissipative rogue waves generated by chaotic pulse bunching in a mode-locked laser. Phys. Rev. Lett. 108, 233901 (2012).
Klein, A. et al. Ultrafast rogue wave patterns in fiber lasers. Optica 5, 774–778 (2018).
Xiao, X., Ding, Y., Fan, S., Zhang, X. & Yang, C. Spatiotemporal period-doubling bifurcation in mode-locked multimode fiber lasers. ACS Photonics 9, 3974–3980 (2022).
Florentin, R. et al. Shaping the light amplified in a multimode fiber. Light Sci. Appl. 6, e16208–e16208 (2017).
Gu, M., Li, X. & Cao, Y. Optical storage arrays: a perspective for future big data storage. Light Sci. Appl. 3, e177–e177 (2014).
Vicidomini, G., Bianchini, P. & Diaspro, A. Sted super-resolved microscopy. Nat. Methods 15, 173–182 (2018).
Fischer, J. & Wegener, M. Three-dimensional optical laser lithography beyond the diffraction limit. Laser Photonics Rev. 7, 22–44 (2013).
Hansson, T. et al. Nonlinear beam self-imaging and self-focusing dynamics in a grin multimode optical fiber: theory and experiments. Opt. Express 28, 24005–24021 (2020).
Lægsgaard, J. Spatial beam cleanup by pure kerr processes in multimode fibers. Opt. Lett. 43, 2700–2703 (2018).
Pourbeyram, H. et al. Direct observations of thermalization to a rayleigh-jeans distribution in multimode optical fibres. Nat. Phys. 18, 685–690 (2022).
Clark, T. W., Offer, R. F., Franke-Arnold, S., Arnold, A. S. & Radwell, N. Comparison of beam generation techniques using a phase only spatial light modulator. Opt. Express 24, 6249–6264 (2016).
Arrizón, V., Méndez, G. & Sánchez-de La-Llave, D. Accurate encoding of arbitrary complex fields with amplitude-only liquid crystal spatial light modulators. Opt. Express 13, 7913–7927 (2005).
Wang, C. et al. A metasurface-assisted fiber laser enables generation of high-power and high-purity structured beams. In Proc 2020 Asia Communications and Photonics Conference (ACP) and International Conference on Information Photonics and Optical Communications (IPOC), 1–3 (IEEE, 2020).
Jia, W. et al. Intracavity spatiotemporal metasurfaces. Adv. Photonics 5, 026002–026002 (2023).
Huang, K., Zeng, J., Gan, J., Hao, Q. & Zeng, H. Controlled generation of ultrafast vector vortex beams from a mode-locked fiber laser. Opt. Lett. 43, 3933–3936 (2018).
Huang, Y. et al. High-order mode yb-doped fiber lasers based on mode-selective couplers. Opt. Express 26, 19171–19181 (2018).
Wang, T. et al. High-order mode lasing in all-fmf laser cavities. Photonics Res. 7, 42–49 (2019).
Xing, D. et al. Spatiotemporal mode-locked fiber laser based on dual-resonance coupling long-period fiber grating. Opt. Express 31, 7134–7143 (2023).
Fu, W., Wright, L. G., Sidorenko, P., Backus, S. & Wise, F. W. Several new directions for ultrafast fiber lasers. Opt. Express 26, 9432–9463 (2018).
Mollenauer, L. F. & Stolen, R. H. The soliton laser. Opt. Lett. 9, 13–15 (1984).
Hofer, M., Fermann, M. E., Haberl, F., Ober, M. & Schmidt, A. Mode locking with cross-phase and self-phase modulation. Opt. Lett. 16, 502–504 (1991).
Ober, M., Hofer, M. & Fermann, M. E. 42-fs pulse generation from a mode-locked fiber laser started with a moving mirror. Opt. Lett. 18, 367–369 (1993).
Tamura, K., Ippen, E., Haus, H. & Nelson, L. 77-fs pulse generation from a stretched-pulse mode-locked all-fiber ring laser. Opt. Lett. 18, 1080–1082 (1993).
Nelson, L., Fleischer, S., Lenz, G. & Ippen, E. Efficient frequency doubling of a femtosecond fiber laser. Opt. Lett. 21, 1759–1761 (1996).
Ilday, F. Ö., Buckley, J., Lim, H., Wise, F. & Clark, W. Generation of 50-fs, 5-nj pulses at 1.03 μm from a wave-breaking-free fiber laser. Opt. Lett. 28, 1365–1367 (2003).
Buckley, J. R., Wise, F. W., Ilday, F. O. & Sosnowski, T. Femtosecond fiber lasers with pulse energies above 10 nj. Opt. Lett. 30, 1888–1890 (2005).
Ilday, F., Buckley, J., Clark, W. & Wise, F. Self-similar evolution of parabolic pulses in a laser. Phys. Rev. Lett. 92, 213902 (2004).
Renninger, W. H., Chong, A. & Wise, F. W. Self-similar pulse evolution in an all-normal-dispersion laser. Phys. Rev. A 82, 021805 (2010).
Lan, Y. et al. Enhanced spectral breathing for sub-25 fs pulse generation in a yb-fiber laser. Opt. Lett. 38, 1292–1294 (2013).
Tang, D. & Zhao, L. Generation of 47-fs pulses directly from an erbium-doped fiber laser. Opt. Lett. 32, 41–43 (2007).
Chong, A., Renninger, W. H. & Wise, F. W. All-normal-dispersion femtosecond fiber laser with pulse energy above 20nj. Opt. Lett. 32, 2408–2410 (2007).
Liu, W. et al. Generation of megawatt peak-power femtosecond pulses from an excessive-normal-dispersion fiber laser. In Proc CLEO Pacific Rim Conference 2018, W1G.2 (Optica Publishing Group, 2018).
Ortaç, B. et al. High-energy femtosecond yb-doped dispersion compensation free fiber laser. Opt. Express 15, 10725–10732 (2007).
Ortaç, B., Baumgartl, M., Limpert, J. & Tünnermann, A. Approaching microjoule-level pulse energy with mode-locked femtosecond fiber lasers. Opt. Lett. 34, 1585–1587 (2009).
Renninger, W. H. & Wise, F. W. Fundamental limits to mode-locked lasers: toward terawatt peak powers. IEEE J. Sel. Top. Quantum Electron. 21, 63–70 (2014).
Dai, C. et al. Self-cleaning effect in an all-fiber spatiotemporal mode-locked laser based on graded-index multimode fiber. Optik 243, 167487 (2021).
Nazemosadat, E. & Mafi, A. Nonlinear multimodal interference and saturable absorption using a short graded-index multimode optical fiber. J. Opt. Soc. Am. B 30, 1357–1367 (2013).
Chen, G. et al. Generation of coexisting high-energy pulses in a mode-locked all-fiber laser with a nonlinear multimodal interference technique. Photonics Res. 7, 187–192 (2019).
Zhao, K. et al. Free-running dual-comb fiber laser mode-locked by nonlinear multimode interference. Opt. Lett. 44, 4323–4326 (2019).
Long, J.-G. et al. Switchable and spacing tunable dual-wavelength spatiotemporal mode-locked fiber laser. Opt. Lett. 46, 588–591 (2021).
Fu, G. et al. Spatiotemporal analysis of an all-fiber multimode interference-based saturable absorber via a mode-resolved nonlinear schrodinger equation. Opt. Express 30, 39086–39100 (2022).
Wang, Z. et al. High-power synchronous multi-wavelength solitons from a multimode mode-locked fiber laser system. Opt. Lett. 46, 118–121 (2021).
Miyamoto, K., Minamide, H., Fujiwara, M., Hashimoto, H. & Ito, H. Widely tunable terahertz-wave generation using an n-benzyl-2-methyl-4-nitroaniline crystal. Opt. Lett. 33, 252–254 (2008).
Huang, Y. et al. Efficient high-power terahertz beating in a dual-wavelength synchronously mode-locked laser with dual gain media. Opt. Lett. 39, 1477–1480 (2014).
Fermann, M. E., Kruglov, V. I., Thomsen, B. C., Dudley, J. M. & Harvey, J. D. Self-similar propagation and amplification of parabolic pulses in optical fibers. Phys. Rev. Lett. 84, 6010–6013 (2000).
Haus, H. A. & Mecozzi, A. Noise of mode-locked lasers. IEEE J. Quantum Electron. 29, 983–996 (1993).
Li, H. et al. Wavelength-tunable spatiotemporal mode-locked fiber laser. Opt. Laser Technol. 163, 109336 (2023).
Wang, Y., Tang, Y., Yan, S. & Xu, J. High-power mode-locked 2 μm multimode fiber laser. Laser Phys. Lett. 15, 085101 (2018).
Demas, J., Rishøj, L., Liu, X., Prabhakar, G. & Ramachandran, S. Intermodal group-velocity engineering for broadband nonlinear optics. Photonics Res. 7, 1–7 (2019).
Zhao, X., Li, T., Liu, Y., Li, Q. & Zheng, Z. Polarization-multiplexed, dual-comb all-fiber mode-locked laser. Photonics Res. 6, 853–857 (2018).
Coddington, I., Newbury, N. & Swann, W. Dual-comb spectroscopy. Optica 3, 414–426 (2016).
Picqué, N. & Hänsch, T. W. Frequency comb spectroscopy. Nat. Photonics 13, 146–157 (2019).
Yang, Q.-F., Yi, X., Yang, K. Y. & Vahala, K. Stokes solitons in optical microcavities. Nat. Phys. 13, 53–57 (2017).
Richardson, D. J., Fini, J. M. & Nelson, L. E. Space-division multiplexing in optical fibres. Nat. Photonics 7, 354–362 (2013).
Puttnam, B. J., Rademacher, G. & Luís, R. S. Space-division multiplexing for optical fiber communications. Optica 8, 1186–1203 (2021).
Klenke, A., Jauregui, C., Steinkopff, A., Aleshire, C. & Limpert, J. High-power multicore fiber laser systems. Prog. Quantum Electron. 84, 100412 (2022).
Genty, G. et al. Machine learning and applications in ultrafast photonics. Nat. Photonics 15, 91–101 (2021).
Shen, Y. et al. Roadmap on spatiotemporal light fields. J. Opt. 25, 093001 (2023).
Cao, H., Chriki, R., Bittner, S., Friesem, A. A. & Davidson, N. Complex lasers with controllable coherence. Nat. Rev. Phys. 1, 156–168 (2019).
Krupa, K., Nithyanandan, K. & Grelu, P. Vector dynamics of incoherent dissipative optical solitons. Optica 4, 1239–1244 (2017).
Katz, O., Heidmann, P., Fink, M. & Gigan, S. Non-invasive single-shot imaging through scattering layers and around corners via speckle correlations. Nat. Photonics 8, 784–790 (2014).
Li, Y., Xue, Y. & Tian, L. Deep speckle correlation: a deep learning approach toward scalable imaging through scattering media. Optica 5, 1181–1190 (2018).
Nixon, M. et al. Real-time wavefront shaping through scattering media by all-optical feedback. Nat. Photonics 7, 919–924 (2013).
Lin, F.-Y. & Liu, J.-M. Chaotic lidar. IEEE J. Sel. Top. Quantum Electron. 10, 991–997 (2004).
Chen, G., Mao, Y. & Chui, C. K. A symmetric image encryption scheme based on 3d chaotic cat maps. Chaos Solitons Fractals 21, 749–761 (2004).
Moon, S. & Kim, D. Y. Ultra-high-speed optical coherence tomography with a stretched pulse supercontinuum source. Opt. Express 14, 11575–11584 (2006).
Qiu, T. et al. Spatiotemporal control of nonlinear effects in multimode fibers for two-octave high-peak-power femtosecond tunable source. Preprint at https://arxiv.org/abs/2306.05244 (2023).
Acknowledgements
This work is supported by the National Natural Science Foundation of China (NSFC) (61975090, 62175127), by the Tsinghua University Initiative Scientific Research Program (20211080080, 2022108006), and by the Tsinghua-Toyota Joint Research Fund.
Author information
Authors and Affiliations
Corresponding authors
Ethics declarations
Conflict of interest
The authors declare no competing interests.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The images or other third party material in this article are included in the article’s Creative Commons license, unless indicated otherwise in a credit line to the material. If material is not included in the article’s Creative Commons license and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Cao, B., Gao, C., Liu, K. et al. Spatiotemporal mode-locking and dissipative solitons in multimode fiber lasers. Light Sci Appl 12, 260 (2023). https://doi.org/10.1038/s41377-023-01305-0
Received:
Revised:
Accepted:
Published:
DOI: https://doi.org/10.1038/s41377-023-01305-0
- Springer Nature Limited