Abstract
Objective
Circular supply chain management (CSCM) incorporates circular thinking — based on the circular economy paradigm — into supply chain management. In the last 5 years, this emerging research field has developed at a rapid pace and, as a result, has attracted great interest from researchers, policy-makers, and practitioners. As there are few studies on the theoretical conceptualization of the circular supply chain (CSC), especially on its definition, this paper aims to fill this gap and to provide conceptual transparency for the CSC framework. The main research question is “What are the current understandings among scholars of the CSC concept and CSCM framework?”.
Method
To answer this question, a systematic literature review was conducted based on the Web of Science and Scopus databases. This was followed by a bibliometric analysis using VOSviewer and a comprehensive content analysis of the literature.
Results
The bibliometric analysis provided an overview of CSC evolution and identified three temporal, thematic clusters. The content analysis identified 127 articles that explicitly mention the term CSC(M). Of these, seventeen articles provide explicit definitions that were thoroughly analyzed and categorized. Following this, six archetypal elements of the CSC and four propositions on the CSC’s uniqueness were formulated.
Conclusion
The CSC research field is evolving rapidly. Its differentiation from other sustainability-related fields is sometimes not clear, and definitions and conceptualizations vary in detail, scope, and focus.
Contributions
This study contributes to the CSC literature and provides transparency for the conceptualization and understanding of CSC. For both theory and practice, an agenda for future research opportunities is identified, which supports the further development of this research field.
Similar content being viewed by others
Avoid common mistakes on your manuscript.
Introduction
For the last two decades, sustainability has been an emerging topic of interest for science, business, and politics. In particular, the incorporation of sustainability-related topics into supply chain management (SCM) has evolved toward a fast-growing and high-volume research stream [1]. This evolution has led to various supply chain–related sustainability frameworks such as green supply chains, closed-loop supply chains, reverse supply chains, sustainable supply chains (SSC) and — most recently — circular supply chains (CSCs) [2–5]. The latter integrates circular thinking based on the circular economy (CE) framework — concerning issues such as recycling, reuse, and a zero waste ideal — into the management of supply chains [6, 7].
The CE framework is an economic model that is restorative and regenerative by design [8]. By definition, the CE aims to replace the end-of-life concept by slowing, closing, and narrowing material as well as energy loops [9]. Within a CE, waste itself becomes input, and products, components, and materials are kept at their highest utility level [8]. In the last 5 to 10 years, interest in this concept has increased significantly, and scientific research has grown immensely [10]. However, as the CE concept has antecedents in many different historical, economic, and ecological fields [11], its conceptualization is proving difficult, leading to various definitions, scopes, and narratives [10]. According to some scholars, the fact that the CE framework is trending and rapidly growing but at the same time still remains open and more divergent than convergent could lead to a collapse, diffusion, or falling behind of its attributed potential [10, 12, 13]. To elevate the CE to a new (sustainability) paradigm, a unified perspective is needed [14].
Despite the limited conceptual consensus regarding the CE framework, especially its relationship to sustainability itself, the SCM domain adopted a circular philosophy, shifting the focus to the newly emerging research field of circular supply chain management (CSCM) [3, 4]. From a sustainability viewpoint, CE strategies could support efforts to holistically integrate the economic, environmental, and social dimensions along the supply chain [4, 15]. However, the conceptualization of the CSC is still at a nascent and early stage. In particular, clear boundaries between other sustainability-related SCM frameworks remain ambiguous, and therefore, the current knowledge base on CSCs is fragmented [16].
Within the last 5 years, several review papers on the CSCM framework have been published. Table 1 presents an overview of the most important studies and their main topics and research purposes. Furthermore, this table compares and positions the present work in relation to these existing reviews. With the exception of study [7] — which collected understandings of the CSC framework but did not explicitly focus on conceptualization and a concrete definition — none of the studies in the literature review seems to explicitly focus on CSC and CSCM definitions and thus on understanding the CSC as a differentiated concept. Based on the reviewed literature and the findings of this study, it can be concluded that — to the best of the author’s knowledge — no study has comprehensively and systematically investigated CSC definitions despite both the academic and practical relevance for CSC operationalization [10].
To support the conceptualization and understanding of the CSC at this research stage, this review mainly aims to provide transparency for the CSC framework, filling the gap in the literature bridging SCM, sustainability, and CE [17]. After some years of the existence of the term “circular supply chain,” this review concentrates on its conceptualization within the research field by synthesizing the outcomes of previous research papers on the CSC. This paper follows recent calls by [2–4], and [19] to analyze supply chains in light of the CE since there is momentum for progressing the theory, especially in terms of its conceptualization. Consequently, the main research question of this paper is as follows:
-
RQ: What are the current understandings among scholars of the CSC concept and CSCM framework?
To properly address this research question, three sub-questions are formulated that serve as guidance throughout this research paper:
-
RQ1: What are the main research streams and core topics within the research field?
-
RQ2: What are the definitions, conceptualizations, and understandings within the research field?
-
RQ3: What makes the CSC concept unique, and thus, what differentiates it from other concepts?
In response to the research questions, a systematic literature review is conducted by applying the search terms “supply chain,” “circular economy,” and “sustain*” to the two most often used databases, Web of Science (WOS), and Scopus [22]. The main objective of this search is to examine CSC definitions and conceptualizations to provide comprehensive and systematic transparency on the current state of knowledge and understanding of CSCs. Through a systematic literature review as the study’s adopted methodology [23], a thorough and in-depth exploration and analysis is facilitated. After a filtering process, an overall final sample of 127 papers is identified. This sample builds the basis to answer the previously formulated research questions. The literature search was updated (1st of March 2022) and thus reflects the very recent state of the research in the CSCM field.
The remainder of this paper is organized as follows: “Conceptual Background” provides a brief overview of the conceptual background, focusing on the three research streams of SCM, sustainability, and the CE. “Methodology” explains in detail the methodology behind the systematic literature review and explains how the final article sample was compiled. The fourth section contains the results of the systematic literature review and the following discussion on CSC uniqueness. First, a general overview of the literature sample is given before RQ1 is addressed by presenting the bibliometric results from VOSviewer. The qualitative results obtained from the content-based analysis are discussed in the subsequent section and answer to RQ2. RQ3 is addressed in the subsequent section, in which four CSC propositions on its uniqueness are presented. Finally, “Conclusion” summarizes the main theoretical and practical contributions of this research paper, elaborates on some limitations, and suggests future research directions for the CSC research framework.
Conceptual Background
Since the purpose of this literature review is to analyze the understanding and interrelationships of traditional, sustainable, and circular supply chains, it is important to briefly establish the conceptual background of the studied concepts and their terms on which the following review section is based. Therefore, the first part of this section focuses on supply chains and their management; the second part briefly summarizes the evolution of the sustainability influence on the SCM research field; and, finally, the background and different definitions of the CE concept are presented.
Supply Chains and Supply Chain Management
With increased competition in globalized markets, higher customer expectations, and shorter product-life cycles, organizations require the effective management of their processes, information and relationships, which often go beyond their national boundaries [24]. In this competitive environment, management of these multiple relationships across the supply chain is necessary [25].
The terms supply chain and SCM first appeared in the early 1980s in the USA and were coined by practitioners and consultants [26]. Although they gained immense attention in practice, the theory from academia developed only later in the 1980s and early 1990s [27, 28]. Since then, the literature on the SCM framework has grown enormously, and various fields have developed within this research stream, e.g., operations management, purchasing, and supply or organizational theory [29]. While in the beginning, the term supply chain management might have often been misunderstood as only the logistics outside of the company, the conceptualization changed [25]. To stay competitive and successful, supply chain decisions — and therefore SCM — play a significant role in every organization [30].
For successful management, it is important to understand which entities are part of the supply chain. In Handfield and Nichols’ definition, all parties involved in “activities associated with the flow and transformation of goods from raw materials stage (extraction) through to the end user, as well as the associated information flows” [27] belong to a supply chain. Similarly, Chopra and Meindl (2016) define that a “supply chain consists of all parties involved, directly or indirectly, in fulfilling a customer request” [30]. There are a variety of stages that can be involved in a typical supply chain and include suppliers, manufacturers, distributors, retailers and, of course, (end-)consumers [30]. Although the term chain suggests that there are only one-to-one relationships, a supply chain is actually more accurately described as a network since there are multiple businesses, parties, and therefore relationships involved [31].
The actual management of the supply chain aims to efficiently and strategically integrate all upstream and downstream processes, operations, (information) flows, and relationships in a way that adds value for customers and all supply chain stakeholders involved [24, 27, 31].
Supply Chains and Sustainability
In 1987, the World Commission on Environment and Development released the Brundtland Report introducing the concept of sustainable development [32], which was a milestone for future sustainability research. Not only does the UN commission’s definition play a crucial role in sustainability research to this day [6], but it has also led to a remarkable increase in publications dealing with sustainability-related issues [1]. Among the various research areas of SCM that have developed over the 30 years of its existence, SSCM is one of the most dynamic and productive research streams [1].
Within the UN World Commission’s report, sustainable development is defined in an inter- and intragenerational context. Development can only be sustainable if others — within this generation and all future generations to come — are not compromised in their (future) needs [32]. While some criticize the vagueness and room for interpretation left by this definition [9, 33, 34], it should also be acknowledged that this definition is used as a common framework that can be appropriately extended to different contexts and applications.
A comprehensive concept in the context of business sustainability was introduced with John Elkington’s 3P formulation together with the triple bottom line, which he developed shortly thereafter [35, 36]. The 3Ps represent the people, the planet, and the profit for which each business organization should account. Instead of only focusing on the traditional financial (bottom) line, companies need to account for their environmental impacts (the planet’s bottom line) as well as their social impacts (humanity’s bottom line). In the context of business sustainability, the three-pillar perspective or the three-dimensional sustainability approach became synonyms that were widely used in academia and practice [1].
In the SCM framework — due to the research interest and the resulting scores of publications — quite a few definitions of sustainability exist, most of them directly in the context of supply chains. An early literature review on the SSCM framework was conducted by Seuring and Müller in 2008. The researchers considered 191 papers published between 1994 and 2007 and provided a now well-known, widely accepted definition of SSCM. This definition and a few other, illustrative definitions are presented in Table 2.
In the SCM literature, a number of other frameworks — such as green supply chains [39], closed-loop supply chains [40], and social/ethical supply chains [37] — emerged within the sustainability narrative. A lack of conceptualization and especially distinction between these concepts led to the interchangeable and synonymous use of terms in the scientific literature [2]. As SSCs can be perceived as extensions of green, social or closed-loop supply chains [39], and the focus within this review is on three-dimensional sustainability in the context of supply chains, no further input on these terms is provided.
Although these concepts differ in their degree of sustainability orientation integrated in the supply chain, none of them fully and systematically integrate circular principles in the context of a CE ideal [3]. The next section provides an overview of the CE paradigm, its development, definition, and key characteristics.
Circular Economy
The idea of circular flows and systems is not as new as it is perceived to be at the moment. Due to the increasing interest in CE in the last 5 to 10 years, it appears to be a promising and rapidly growing research field [41–43], but the remote origins of the concept actually date back to Boulding in 1966 [44, 45]. Although Boulding did employ the exact term “CE,” he refers to “cyclical ecological systems” without which human survival on earth cannot be sustained in the long run [46].
Building on Boulding’s ideas, an introduction of the CE term is mostly associated with Pearce and Turner in the late 1980s and early 1990s [45, 47]. Based on investigations on the impacts of linear and open-ended systems, they argued that a traditional linear economy must be replaced by a cyclical system in which waste becomes input for the system [45, 47–49].
In regard to the roots of the actual concept of CE and its application in practice, one must consider several related concepts, frameworks, and research streams that are more or less closely associated with the CE such as cradle-to-cradle, industrial ecology, the performance economy, the blue economy, and regenerative design. For further in-depth studies on these schools of thought and their relationship to the CE concept, see, for example, research from Ghisellini, Cialani, Ulgiati [47], Geisendorf, Pietrulla [45], Homrich et al. [41] and Merli, Preziosi, Acampora [42].
As the CE concept has antecedents in many different historical, economic and ecological fields [11], it has proven difficult to obtain a cross-disciplinary understanding, leading to various definitions, scopes, and CE narratives in research and practice [10]. There is agreement among researchers that there is a lack of consensus on the definition of CE, although it is of great importance for both academia and practice [13]. Some studies have been undertaken to gather the most important definitions and conceptualizations to create transparency for this emerging research field; see, e.g., Kirchherr, Reike, Hekkert [10], who collected 114 different definitions of the CE framework.
According to some scholars, the fact that employment of the CE concept is trending and rapidly growing but at the same time remains open and more divergent than convergent could lead to a collapse, diffusion, or falling behind of its attributed potential [10, 12, 13]. To elevate the CE framework to a new (sustainability) paradigm, a unified perspective is needed [14].
Table 3 summarizes some of the most prominent definitions currently being used, drawn from academia, politics, and the UK-based charity the Ellen MacArthur Foundation, a non-governmental flagship organization promoting the CE and its concept. Again, this collection should be understood as a representative presentation of definitions collected based on a literature scan rather than a systematic literature search. Therefore, the chronological collection is not comprehensive but rather illustrative.
Methodology
To answer the established research questions, a systematic literature review was conducted. This research framework was adopted from the literature search process proposed by Tranfield, Denyer, Smart [23]. After finalizing the main research objective of this study — to identify and systematize works addressing the CSC framework and to then gather definitions and conceptualizations on the CSC — three phases of planning, searching, and reporting were followed:
-
Planning: During the planning phase, the basic systematic literature review process was established. This included the definition of the search terms, search field, and time frame as well as language and publication types. As this research aims to capture the current understanding of the CSC framework and thus tries to identify explicit definitions of the CSC(M) term, the search terms “circular,” “supply chain,” and “sustain*” were selected. The scope of the review included (peer-reviewed) journal articles and conference proceedings published in English. The two most commonly used databases, WOS and Scopus, were selected to mitigate the risk of missing important articles for this research [55].
-
Searching: The literature search itself was conducted at the beginning of March 2022 and retrieved 1109 articles in the WOS and 930 articles in the Scopus database. After deleting 575 duplicates, 1464 articles remained for further analysis. To this end, further quality criteria for inclusion and exclusion were defined. Thus, articles had to interpret the CSC framework as a new concept, understand it as a theoretical framework, apply the CSC framework to a real world problem, or conduct case studies on the CSC. Based on these criteria, 1199 articles were excluded based on their title and keywords, leaving 265 articles for further, in-depth text screening. Next, 147 articles were excluded based on their content and lack of CSC focus. Nine hand-selected publications, which were found via the snowballing technique [9], were included based on their content fit to the CSC framework. Thus, 127 articles were identified as the final sample.
-
Reporting: The reporting phase comprised two stages, specifically, descriptive or bibliometric analysis and thematic analysis. In the former stage, two main software packages were used: MS Excel and VOSviewer. VOSviewer is a freely available computer program that can be used for constructing and analyzing bibliometric mapping [56]. This bibliometric analysis aims to answer RQ1, which concerns the general body of knowledge and the current research stream within the field of CSCs. The thematic analysis aims to answer RQ2 and RQ3 and therefore uses a content analysis to systemize and identify definitions and conceptualizations of the CSC framework.
The study selection process as described above is illustrated in Fig. 1 (adopted from Hofmann [57]).
Results and Discussion
Sample Overview
This section presents the first part of the systematic literature review’s obtained results and aims to give a brief overview of the article sample. As explained in detail in “Methodology”, the final sample consists of 127 research articles. Figures 2 and 3 display these 127 articles and their distribution per publication year (time span from 2010 to 2022) and per publication source.
With the exception of the two publications in 2010 — which are extended conference papers — all other reviewed articles were published from 2016 onward. From 2016/2017 to 2018/2019/2020, a noticeable steady increase in publications was recognized. To date, the peak in publications was reached in 2021, with 47 articles addressing the CSC framework overall. As of March 1, 2022, 12 articles have already been published, indicating that the peak from 2021 may be exceeded this year. This development reflects the growing interest in this research field and stresses the need for a systematization and identification of key articles within the field.
Figure 3 presents the distribution of the final sample across the journals in which they were published. Overall, 51 different journals published contributions to the research field. It was found that 35 journals published only one article on this topic. The Journal of Cleaner Production, an international and transdisciplinary journal focusing on sustainability research, tops the list with a 20% share of publications (26). The journals Production Planning & Control (11) and Sustainability (10) rank second and third, respectively. This distribution indicates that the research field itself is represented from a variety of perspectives and angles and thus has a strong interdisciplinarity.
Bibliometric Results
To address RQ1 — concerning the research streams and core topics within the research field — bibliometric analysis was carried out using VOSviewer. The software allows for the identification of the leading publications and connections not only in terms of citations and co-authorship but also in terms of the co-occurrence of (author-provided) keywords. The central feature of the applied software is the creation of network maps based on bibliometric data obtained from search databases [56].
To identify current topics and thematic developments within the CSC research field, the co-occurrences of author keywords were mapped. In addition, a temporal overlay function provided by the software was used to connect the keywords with the dates of their source documents. Both the search results from WOS and Scopus were used as a data basis with the aim of obtaining a comprehensive picture of the CSC research field.
The VOSviewer settings were set to at least 15 co-occurrences per keyword, resulting in 36 mapped keywords overall. To avoid duplications in the visualization, synonymous terms or different variants of keywords were merged using a thesaurus file. The temporal co-occurrence map is depicted in Fig. 4. The most used keywords appear in the largest circles, and the strength of the co-occurrence between two keywords is indicated by the strength of the combining link. Table 4 presents the list of the top 20 keywords, their absolute occurrence, and their link strength.
The most common keywords retrieved were — unsurprisingly, as the map was created based on these search terms — CE, sustainability (and sustainable development), and supply chain (management). Setting aside these keywords, the next most frequently studied topics were industry 4.0; literature review; sustainable development and three different supply chain management frameworks, namely, closed-loop, circular, and sustainable. The only methodological keyword within the top 20 was “literature review” (R5). This underscores the early research stage of the CSC framework and its theoretical and conceptual nature.
As the colors in the map do not represent thematic similarity but, rather, how recently the keywords appeared in the body of literature [58], topics of current interest or so-called hot topics within the field can be identified (Fig. 5). Three main temporal clusters can be identified: starting with an emphasis on environmental issues, the research concentration shifted toward an early circular and more holistic sustainability focus before the CSCM research field emerged as a separate one. While the earliest cluster still features concepts such as green supply chain management — which shows an average publication year of 2016.35 — the second cluster focuses more on R-imperatives such as recycling (R10) or reuse (R18) and sustainability-related concepts. Most recently, new approaches concerning the Fourth Industrial Revolution (I4.0) and other digitally enabled developments, such as the Internet of Things, big data, and blockchain, have arisen in the body of literature. A current application of the circular supply chain research field is the food supply chain (R20; average publication year 2020.76). Publications focus on issues such as waste flows [59], food redistribution [60] and knowledge sharing and the impact of technology [61]. The most recent development within the research field is — also unsurprisingly — the COVID-19 pandemic. With an average publication year of 2021.06 and 19 overall occurrences, the influence of the global pandemic can be recognized within the CSCM research field (see, e.g., [62]).
Qualitative Results
This section explains the results of the second part of the systematic literature review and presents the qualitative results obtained from the content analysis. These thematic results are divided into two parts. The first part reviews the final sample of research articles for explicit definitions on the terms CSC and/or CSCM and gives an answer to RQ2: What are the definitions, conceptualizations, and understandings within the research field? Based on an analysis of those findings, six CSC archetypal elements are proposed that synthesize the framework’s current understanding in the scientific literature. The second part includes a detailed discussion on the CSC framework’s relationships to other, traditional, and sustainability-related, supply chain frameworks and thus answers RQ3: What makes the CSC concept unique, and thus, what differentiates it from other concepts? Four propositions on the CSC are formulated to position this framework in the sustainability management research.
CSC Definitions and Archetypal Characteristics
To provide a valid view of the current understanding of CSCs in the scientific discourse, the final sample was reviewed for explicit definitions of the terms CSC and/or CSCM. Out of the 127 articles from the final sample, 17 mention (explicit) definitions and thus comprise the important partial sample for the thematic analysis. Table 5 depicts these 17 definitions along with details on the article types and their research focus.
Although the majority of the partial sample are systematic or structured literature reviews that analyze the CSC(M), no comprehensive compilation of definitions of the term circular supply chain (management) was found. Although the work of González-Sánchez et al. [7] is the exception as it includes a collection of definitions on the CSC, it also covers other, related supply chain concepts and focuses more on the configurations and enablers of the CSC rather than on the conceptualization behind each definition. Table 5 shows that the conceptualization is wide-ranging, varying in detail, scope, and focus. While some scholars merely describe what makes a supply chain a circular one and what its main characteristics are, others aim at holistically defining the CSC as a novel and, more importantly, distinct framework. Geissdoerfer et al. [18] and González-Sánchez et al. [7] each provide a definition of the term CSC as well as CSCM. Farooque et al. [3] and Vegter, van Hillegersberg, Olthaar [71] define only the term CSCM. However, the definition provided by Farooque et al. provides a comprehensive integrated view with the aim of distinguishing it from other sustainability research frameworks. The remaining definitions focus, with varying degrees of detail, exclusively on the term supply chain.
One of the most important conclusions that can be drawn from this analysis is that it appears that new definitions — and thus new, and possibly different, conceptualizations of the CSC framework — are no longer being introduced to the research field. In fact, out of the 17 definitions found through this systematic search, eleven are from 2017 and 2018. In the last year (2021), only one new definition was added — the one from Vegter et al. [72] that builds on their previous conceptualized definition formulated in a publication from 2020 and is only supplemented by a restorative and regenerative characteristic. The thesis that there is no longer a major accumulation of knowledge is also supported by the fact that the most recent articles from 2021 and 2022 almost all build on existing definitions, which is that presented in Table 5. For example, the definition provided by Batista et al. [2] is cited in recent works such as [73, 74], and [60]. However, the definition and conceptualization of Farooque et al. [3] is by far the most frequently cited and referenced (e.g., [75–79]); this suggests that the definition is the most comprehensive one as it captures the CSC as a differentiated concept.
A detailed analysis of the collected definitions, their further descriptions, and their detailed elaborations led to the extraction of key features. In this research paper, they are referred to as CSC archetypal characteristics. The identification of these characteristics followed the author-centric to concept-centric approach proposed by Webster, Watson [80]. This approach allows a synthetization of the literature by determining and discussing a framework’s key concepts or characteristics. It was further inspired by other sources, e.g., Stock, Boyer [81] and Ahi, Searcy [39]. Thus, it was possible to develop Table 6, which presents the six CSC archetypal characteristics resulting from the content-based literature review. These may be expressed as (1) R-imperatives, (2) restorative and regenerative cycles, (3) sustainability framework, (4) value focus, (5) holistic system-thinking, and (6) paradigm shift. These archetypal characteristics can be understood as distinct and unique features of the CSC concept that provide transparency for the CSC conceptualization. Too often, the term CSC means different things to different researchers and practitioners, and therefore, these characteristics aim to synthesize the various CSC properties. Table 6 presents them and their corresponding descriptions and contributing authors.
These characteristics were extracted to facilitate a clearer understanding of CSCs as a distinct concept within the sustainability management research field. In addition to the compilation of the definitions of the CSC, the identified archetypical characteristics provide a clearer profile of the CSC and thus help distinguish it more clearly from other frameworks such as SSCs and green supply chains. Only in this way will the newly emerging CSC concept have a chance of becoming permanently anchored in the sustainability management research field.
Table 7 shows the characteristics identified for each analyzed article in the partial sample. According to the analysis of these data, it is — again — evident that there is no total consensus between the 17 author groups and each of their CSC conceptualizations. The definition provided by Farooque et al. [3] (no. 12) is the most comprehensive one. While other definitions and research perspectives on CSCs lack some of the extracted archetypal elements, this definition comprehensively incorporates all of the identified main characteristics. Six definitions found within the literature review incorporate only three or less of the archetypal elements, which suggests that they do not provide as holistic or comprehensive an understanding as the others. There is some consensus among the authors regarding the archetypal characteristic restorative and regenerative cycles: 13 out of 17 articles (partially) consider this element, which demonstrates that it can be defined as a key characteristic for the CSC. The least-considered characteristic is paradigm shift: fewer than half of the analyzed contributions mention this element as an important feature of the CSC.
It is possible that the lack of consensus among the authors can be explained by the absence of a holistic view of the supply chain in the CE context. This highlights the research gap that this article attempts to fill and confirms the purpose of this paper to facilitate the understanding of the CSC framework, including the collection of definitions on the concept as well as the clarification and categorization of archetypal characteristics. The latter, in particular, serves as the basis for answering RQ3, specifically, the differentiation of the CSC framework from other research concepts in sustainability management. In the following section, four CSC propositions and their associated categorizations are presented in detail.
CSC Propositions
To answer RQ3 and the issue of what makes the CSC unique, specifically, what distinguishes the CSC concept from other sustainability concepts, this section presents four propositions to provide conceptual transparency for future CSC research. These four propositions are the result of the literature synthesis of the CSC framework and summarize the unique CSC characteristics, which clearly distinguish the CSC framework from related concepts.
Regeneration
As presented in “Conceptual Background” and “Qualitative Results”, the restorative and regenerative cycles constitute a distinctive attribute of the CE ideal. It was explained that there is a clear distinction between restoration and regeneration and their corresponding cycles. According to McDonough, Braungart [97], the planet on which we live has two different metabolisms: the biological (biosphere) and the technical (technosphere) cycle [97]. In the second cycle — the cycle of the industry — the technical nutrients (inorganic or synthesized materials such as metals or plastics) stay in a closed loop by applying restorative processes in such a way that they are returned to a previous, original or improved state [2, 85, 97]. Restoration can be achieved by repairing, refurbishing, remanufacturing, and recycling [83, 98].
While this restorative dimension is one that is commonly known from other sustainability-related concepts within the SCM field (e.g., in green or closed-loop supply chains [99]), it is the regenerative dimension that defines the CE and thus distinguishes the CSC from other frameworks [3, 100]. Although the term regeneration is not easily differentiated from the previous term of restoration [85], the two terms can and should be distinguished based on metabolism cycles: while recovery processes for technical nutrients take place within the technical cycle, regeneration for biological nutrients takes place within the biological cycle. A biological nutrient can be defined as “a material or product that is designed to return to the biological cycle — it is literally consumed by microorganisms in the soil and by other animals” [97]. Such materials are organic and therefore can decompose in the natural environment (e.g., water or soil) and provide food and balance for the ecosystem [97, 101]. Compared to technical materials and products, biological materials have the ability to become nutrients in the soil and other ecosystems in the biosphere, creating natural capital for reuse [102].
Figure 6 illustrates the dimensions of restoration and regeneration with a four-field matrix, with either a low or high expression of the property. Although this separation is quite rigid and simple, it allows for a clear classification that furthers the understanding of the CSC, facilitating its differentiation from other sustainability management frameworks. Traditional — and mostly linear — supply chains typically incorporate only some or no restorative and regenerative flows at all. SSCs and closed- and open-loop supply chains, on the other hand, include restorative flows at their core (e.g., repairing, recycling, remanufacturing). However, CSCs set themselves apart from these frameworks by adding a regenerative dimension to their supply chain activities. Hence, the following proposition is suggested:
-
Proposition 1: Circular supply chains have both restorative and regenerative dimensions.
Open Loops and Cascading Flows
Closely related to the previous dimension of regeneration is the open-loop and cascading dimension that represents a second important pillar, which is thus a distinguishing characteristic of the CSC. Within the well-established closed-loop supply chain, reverse directed recovery flows of material and products (such as reuse, refurbishing, remanufacturing, or recycling) are already a major supply chain activity [86, 103]. The direction of these flows is reversed and therefore in the opposite direction of the original, forwarded flow of materials and products. In addition, these reverse flows remain — as the name already suggests — within the supply chain. More explicitly, reverse flows are beneficial, for example, by returning recovered packaging material to the producer within the supply chain for further value recovery [40].
In a CSC — in addition to the closed-loop recovery flow — there is another type of material flow. This flow is an open-loop, forwarded cascading flow that brings secondary material (such as used goods, parts, components, byproducts, and useful waste) to other organizations outside of the supply chain [2, 3, 83, 86]. These open-loop flows are advantageous because recovered material that cannot be further used within the supply chain substitutes for virgin material in other supply chains, leading to an overall reduction in waste and virgin material use [3, 98]. Furthermore, these open-loops aim toward the zero-waste ideal and can be directed to other supply chains within either the same or other sectors [86].
It can therefore be concluded that the CSC extends the earlier sustainability management research frameworks via an open-loop and cascading flow dimension (see Fig. 7). Hence, the following proposition is suggested:
Proposition 2: In a CSC, closed- and open-loop flows are applied with the goal of reducing waste and virgin material use within as well as across supply chains.
Value Creation Focus
The integration of circular thinking into the production system changes the perspective on values and their potential for the supply chain [83]. The third fundamental proposition of the CSC is therefore one that was already mentioned within the archetypal characteristics of the CSC, specifically, the focus on values. By applying closed-loop as well as open-loop flows within and across the CSC, one major focus is on value creation. In particular, the supply chain is a key force for value creation because circular flows are the core of the CSC [18, 68].
The Ellen MacArthur Foundation developed four key principles of value creation that are fundamental to the CE ideal: the power of the inner circle, the power of circling longer, the power of cascaded use, and the power of pure inputs [8]. The inner circle refers to repairing or maintaining a product rather than remanufacturing or recycling it because more of the original value is preserved. The closer the circle in which a product flows, the more value is maintained [8]. Reike et al. conceptualized the closely connected R-imperatives and their preferred application within the supply chain. The lower the number associated with the imperative, the greater the focus on this imperative should be (e.g., R3 = repair preserves more value than R6 = repurpose where discarded goods or components are adapted for a different use). Longer circles aim at increasing the number of consecutive cycles and/or the time in each cycle. Through reuse or actions that extend product life, the timing of the resource loop is slowed [8, 104]. A cascaded use aims at substituting inflows of virgin materials, which results in a reduction of overall virgin material use [8]. Cascading refers to the above-described forward open-loop flows of secondary materials that connect producers, firms, and organizations across other supply chains [2]. One last key principle is the power of pure inputs. Value creation requires a certain level of purity of material and a certain level of quality of products and components. With nontoxic, easily separable inputs and designs, further potential for value creation is generated [83].
All four principles have one goal that they pursue: to create value whenever and wherever possible. This leads to a reduction or even complete elimination of waste. The conventional linear take-make-waste approach is neither designed nor targeted at value recovery or value creation. While, in SSCs, value creation takes place to some extent (e.g., R-activities such as recycling or reuse) and negative environmental and social impacts of the supply chain are reduced, the linear design is not fundamentally changed, so waste is still produced. A full CSC, on the other hand, focuses on value creation. By comprehensively redesigning the supply chain, the outputs of the production process become nutrients for further value creation rather than waste for disposal.
To distinguish the different supply chain concepts, Fig. 8 illustrates the intensity of value focus and waste elimination focus within different supply chain concepts. CSCs go beyond the boundary of related concepts and have a stronger focus on values and waste elimination [100]. The following proposition on the CSC is made:
-
Proposition 3: In CSCs, value creation and waste elimination are the core focus of all supply chain activities.
Paradigm Shift
As described in the above sections, a transition toward a CE is associated with a major paradigm shift in production philosophy [2, 15, 52, 63]. Since supply chains are the key unit of action for the transition toward an ideal CE, the analysis of the adoption of CE principles into the supply chain is highly relevant.
Figure 9 links and synthesizes several findings and perspectives on the CSC framework, especially in research from Hussain, Malik [15], Geissdoerfer et al. [9], Reike, Vermeulen, Witjes [13], and Loiseau et al. [95]. Within this figure, different supply chain concepts are presented from a paradigm shift-sustainability-ambition perspective. Both perspectives can be synthesized from the previous three key propositions.
Since regeneration, open-loop, and cascading flows as well as a value creation focus are crucial principles of a supply chain in terms of a CE ideal, the supply chain’s organization and production in particular require major changes [7]. Angelis, Howard, Miemczyk [17] find that in the transition from linearity to circularity, major changes in terms of supply chain strategy, structure, flow, focus, scale, and scope are needed. While the authors draw on notions that have already been mentioned (e.g., closed and open material loops, technical and biological cycles), they reason that supply chain relationships and therefore organizations must change when moving toward a CSC (e.g., in terms of ownership or procurement). Hussain, Malik [15] and Geissdoerfer et al. [9] both argue that a radical change is needed, not only in how we produce goods and services but also in how we consume. In a CSC, consumers and especially their consumption behavior play a significant role in supply chain performance because consumers must be more actively integrated to successfully implement CE principles such as reuse and remanufacturing [6].
While in the sections above, linear, sustainable, and CSC were differentiated by various other dimensions, the distinction here is made directly with the sustainability ambition level incorporated in the different supply chain concepts. Although the relationship between CE and sustainability is still under discussion in the scientific community (see, e.g., Geissdoerfer et al. [9] and Korhonen et al. [52], the understanding in this paper follows the conceptualizations of Batista et al. [2], Farooque et al. [3], Hussain, Malik [15] and, most recently, Farooque et al. [100] that CSCs expand and enhance previous supply chain concepts (such as closed- and open-loop supply chains, green supply chains or SSC) in terms of sustainability orientation and sustainability ambition. However, CSCs distinguish themselves from other frameworks only if economic, environmental, and social goals are explicitly incorporated and aligned [18]. Only if the CSC concept strives to balance the sustainability dimensions will they have a transformative impact.
In summary, CSCs need major organizational, structural, and institutional change that is required to meet the challenges of sustainability in production and consumption [95]. Hence, the following and last proposition is suggested:
-
Proposition 4: CSCs require a paradigm shift and have a strong sustainability ambition level.
Conclusion
There is growing interest in the CSC, which is a trending concept in the field of sustainable business management. Within the last 5 years, the number of research articles on supply chains in light of the CE has increased significantly. As is so often the case when a new concept catches on, there is a risk that its meaning will become diffuse and the term itself will be used only as a buzzword. To mitigate that risk, the current paper has explored the CSC as a concept and has aimed to provide transparency for a better and more differentiated understanding of the CSC. Although at least ten CSC review articles have been published thus far, none comprehensively and systematically analyzes CSC conceptualization. The focus of this paper was to gather definitions of the CSC(M) term, synthesizing the existing literature to provide transparency for future research in this field. In the following subsections, theoretical and practical contributions are highlighted, and limitations and possible future research opportunities are presented.
Theoretical Contribution
To date, this is the first attempt to comprehensively collect CSC definitions to further — and more importantly, holistically — conceptualize the framework within the sustainability management research field. A systematic literature review of the current research base revealed that the CSC framework, its current interpretation, and especially its relationship to other sustainability-related management frameworks have not been adequately addressed. This resulted in the following main research question:
-
What are the current understandings among scholars of the CSC concept and CSCM framework?
In response to this research question, a systematic literature review was conducted. The two major databases, WOS and Scopus, were used to search for research articles that consider the CSC as a distinct concept and thus include new definitions, conceptualizations, theoretical, or applied frameworks and case studies on the CSC. Nearly 1500 articles were located and evaluated based on quality and content. After a careful screening process, 127 articles remained for further in-depth analysis.
The findings of this study add to the literature on supply chains in the context of the CE and make three major theoretical contributions. These can be best summarized through the proposed subquestions that were answered throughout the paper:
-
1.
What are the main research streams and core topics within the research field?
The first contribution is the identification of the main research streams and core topics. To identify the direction of development of the CSC research field, VOSviewer software was used to visualize the co-occurrence of author keywords in a temporal overlay. Three thematic clusters were identified: (1) a pure environmental focus, (2) an early circular and holistic sustainability focus, and (3) a more concentrated CE focus as well as a digitalization focus. In particular, the last and thus most recent cluster already incorporates the COVID-19 pandemic, which illustrates the timeliness of the research field. To date, this is the first attempt to identify and visualize the temporal evolution of the still young CSC research field.
-
2.
What are the definitions, conceptualizations, and understandings within the research field?
A second contribution is the systematic and comprehensive collection of CSC definitions and conceptualizations. Out of 127 reviewed articles, seventeen provide a distinct and clear definition of the CSC concept. Although a large number of the articles reviewed are systematic or structured literature reviews, no comprehensive compilation of definitions was found. This highlights a gap that this research paper aims to fill and confirms the purpose of this article in conceptualizing the CSC. Furthermore, the existing conceptualizations were found to be broad and vary in detail, scope, and focus. Thus, a further in-depth analysis of the identified sample led to the identification of six archetypal elements of the CSC: (1) R-imperatives, (2) restoration and regeneration cycles, (3) sustainability frameworks, (4) value focus, (5) holistic systems-thinking, and (6) paradigm shifts. These further add to the CSC literature and contribute to a more transparent understanding.
-
3.
What makes the CSC concept unique, and thus, what differentiates it from other concepts?
Last, a third contribution is the identification of four propositions on the CSC framework that offer novel and important insights into how CSCs differ from traditional (linear) supply chains, open- and closed-loop supply chains, and sustainable supply chains. In doing so, this paper contributes to the literature by providing clear statements on CSC uniqueness, creating much needed transparency for the research field and future research on this topic. The term CSC is multifaceted and means different things to different people. To overcome the framework’s ambiguity, this article has attempted to synthesize the CSC’s core properties: (1) regeneration, (2) open loops and cascading flows, (3) value creation focus, and (4) paradigm shift. These properties set the CSC apart from other sustainability-related supply chain concepts, and therefore, a clear and much-needed differentiation is provided.
Overall, this paper contributes to various calls from the research community to conceptualize the CSC and to identify the current state of the research (e.g., Angelis, Howard, Miemczyk [17] Batista et al. [2] and Farooque et al. [3]).
Practical Contribution
Although the contributions of this paper are primarily theoretical in nature, some practical contributions can be concluded. These can be derived from the core properties of the CSC that were developed in “CSC Propositions”. First, the regenerative aspect — as well as the restorative aspect — cannot be neglected if managers want to change their supply chain activities from predominantly linear to circular processes. Regenerative cycles in which biological materials are recirculated must be designed and implemented efficiently. If supply chains are no longer designed to create waste but to create future input, core supply chain functions must adapt. In practice, this means, in particular, changing and adapting product development that aims from the outset to ensure that products can be easily returned to either the biological or technical cycle. Another important adjustment must be made in procurement, as it is no longer possible to procure products that are not suitable for circulation [100]. Second, as CSCs circulate not only in closed but also open- and forward-directed loops, CSC managers need to collaborate more intensely with other, often cross-sectional, supply chains to succeed in achieving the zero-waste ideal. Long-term circularity collaborations with other industries, businesses, and organizations are needed [78]. Third, in the transition toward a CSC, managers need to focus on implementing a systematic waste hierarchy. The holistic implementation of R-imperatives that cover the entire product lifecycle is key when aiming to close the (linear) supply chain gap. In a CSC, the core supply chain processes are supplemented by additional processes, increasing the complexity of the tasks for managers. In particular, the process “use” and thus the consumer come to the center of attention [71]. Finally, managers of a (soon-to-be) CSC face the consequences of a major paradigm shift if they truly and systematically work toward achieving a full CSC. Many challenges — organizational, governmental, or internal challenges from the supplier or consumer side — will arise during the process of CE implementation [96]. To be successful in the long term, the management of a CSC requires highly qualified and competent CE experts to support a paradigm shift toward circularity. In addition, full commitment from top-level management is needed.
Limitations
The research presented here is not without limitations. The methodology of the literature review was systematic and enabled the identification of important contributions to the CSC research topic. The selection process itself focused on the terms CE and supply chains within titles, abstracts, and keywords and therefore may have been too rigorous, potentially overlooking other important contributions. In addition, the search focused only on the two major databases — WOS and Scopus — disregarding other sources of potential articles. The exclusion of book chapters and proceedings, as well as all non-English language works, also limits a more comprehensive analysis and further contributions to the conceptualization of the CSC term. However, these exclusions were intentional to ensure that the review focuses on academic articles within the CSC research field.
The focus of this paper has been to compile written definitions of the terms CSC and CSCM to understand the concepts and provide transparency so that they can be distinguished from other related frameworks. Nevertheless, a definition is often brief and rather narrow compared to the overall understanding. Thus, this approach may neglect some dimensions of the CSC as they are not present in the (most likely) narrow CSC definition [10]. However, it is still of academic relevance how a concept — in particular a trending one — is understood among scholars in the research field.
Future Research Opportunities
An important finding of this paper is that the CSC framework is only at an early stage of research. The compiled definitions of the term CSC clearly demonstrate this, as they vary widely in scope, depth, and focus. The CSC field is rapidly evolving, so an update of the literature in the field will be needed in the coming years to capture the direction of development.
The CSC framework provides an interesting and promising research topic that aims to replace the end-of-life concept and accelerate the transition from linear to circular production and consumption. As this research article focused on the conceptual CSC understanding, future research opportunities lie in the practical adoption of circular practices in supply chains. Issues of particular importance are summarized in Table 8.
Data Availability
All relevant data and material that was used to conduct this research can be provided upon request.
Code Availability
Not applicable.
References
Martins CL, Pato MV (2019) Supply chain sustainability: a tertiary literature review. J Clean Prod 225:995–1016. https://doi.org/10.1016/j.jclepro.2019.03.250
Batista L, Bourlakis M, Smart P, Maull R (2018) In search of a circular supply chain archetype – a content-analysis-based literature review. Prod Planning Contr 29:438–451. https://doi.org/10.1080/09537287.2017.1343502
Farooque M, Zhang A, Thürer M, Qu T, Huisingh D (2019) Circular supply chain management: a definition and structured literature review. J Clean Prod 228:882–900. https://doi.org/10.1016/j.jclepro.2019.04.303
Lahane S, Kant R, Shankar R (2020) Circular supply chain management: a state-of-art review and future opportunities. J Clean Prod 258:120859. https://doi.org/10.1016/j.jclepro.2020.120859
Sehnem S, Kuzma E, Julkovsky DJ, Frare MB, Vazquez-Brust D (2021) Megatrends in circular economy: avenues for relevant advancements in organizations. Circ.Econ.Sust. https://doi.org/10.1007/s43615-021-00036-x
Taghikhah F, Voinov A, Shukla N (2019) Extending the supply chain to address sustainability. J Clean Prod 229:652–666. https://doi.org/10.1016/j.jclepro.2019.05.051
González-Sánchez R, Settembre-Blundo D, Ferrari AM, García-Muiña FE (2020) Main dimensions in the building of the circular supply chain: a literature review. Sustainability 12:2459. https://doi.org/10.3390/su12062459
Ellen MacArthur Foundation (2015) Towards a circular economy: business rationale for an accelerated transition. https://www.ellenmacarthurfoundation.org/publications/towards-a-circular-economy-business-rationale-for-an-accelerated-transition. Accessed 06.07.20
Geissdoerfer M, Savaget P, Bocken NM, Hultink EJ (2017) The circular economy – a new sustainability paradigm? J Clean Prod 143:757–768. https://doi.org/10.1016/j.jclepro.2016.12.048
Kirchherr J, Reike D, Hekkert M (2017) Conceptualizing the circular economy: an analysis of 114 definitions. Resour Conserv Recycl 127:221–232. https://doi.org/10.1016/j.resconrec.2017.09.005
Murray A, Skene K, Haynes K (2017) The circular economy: an interdisciplinary exploration of the concept and application in a global context. J Bus Ethics 140:369–380. https://doi.org/10.1007/s10551-015-2693-2
Rizos V, Tuokko K, Behrens A (2017) Circular economy: a review of definitions, processes and impacts. CEPS Research Report
Reike D, Vermeulen WJ, Witjes S (2018) The circular economy: new or refurbished as CE 3.0? — exploring controversies in the conceptualization of the circular economy through a focus on history and resource value retention options. Resour Conserv Recycl 135:246–264. https://doi.org/10.1016/j.resconrec.2017.08.027
Prieto-Sandoval V, Jaca C, Ormazabal M (2018) Towards a consensus on the circular economy. J Clean Prod 179:605–615. https://doi.org/10.1016/j.jclepro.2017.12.224
Hussain M, Malik M (2020) Organizational enablers for circular economy in the context of sustainable supply chain management. J Clean Prod 256:120375. https://doi.org/10.1016/j.jclepro.2020.120375
Masi D, Day S, Godsell J (2017) Supply chain configurations in the circular economy: a systematic literature review. Sustainability 9:1602. https://doi.org/10.3390/su9091602
de Angelis R, Howard M, Miemczyk J (2018) Supply chain management and the circular economy: towards the circular supply chain. Prod Planning Contr 29:425–437. https://doi.org/10.1080/09537287.2018.1449244
Geissdoerfer M, Morioka SN, de Carvalho MM, Evans S (2018) Business models and supply chains for the circular economy. J Clean Prod 190:712–721. https://doi.org/10.1016/j.jclepro.2018.04.159
Cerqueira-Streit J, Endo G, Guarnieri P, Batista L (2021) Sustainable supply chain management in the route for a circular economy: an integrative literature review. Logistics 5:81. https://doi.org/10.3390/logistics5040081
Lengyel P, Bai A, Gabnai Z, Mustafa OMA, Balogh P, Péter E, Tóth-Kaszás N, Németh K (2021) Development of the concept of circular supply chain management—a systematic review. Processes 9:1740. https://doi.org/10.3390/pr9101740
Zhang A, Wang JX, Farooque M, Wang Y, Choi T-M (2021) Multi-dimensional circular supply chain management: a comparative review of the state-of-the-art practices and research. Transp Res Part E: Logist Transp Rev 155:102509. https://doi.org/10.1016/j.tre.2021.102509
Terán-Yépez E, Jiménez-Castillo D, Sánchez-Pérez M (2021) International opportunity recognition: a comprehensive bibliometric review. J Int Entrep 19:18–52. https://doi.org/10.1007/s10843-020-00276-2
Tranfield D, Denyer D, Smart P (2003) Towards a methodology for developing evidence-informed management knowledge by means of systematic review. Br J Management 14:207–222. https://doi.org/10.1111/1467-8551.00375
Simchi-Levi D, Kaminsky P, Simchi-Levi E (2011) Designing and managing the supply chain: concepts, strategies, and case studies, 3. ed., internat. student ed., [Nachdr.]. The McGraw-Hill/Irwin series in operations and decision sciences. McGraw-Hill/Irwin, Boston, Mass.
Lambert DM, Cooper MC (2000) Issues in supply chain management. Ind Mark Manage 29:65–83. https://doi.org/10.1016/S0019-8501(99)00113-3
Oliver KR, Webber MD (1992) Supply-chain management. Logistics catches up with the strategy. In: Christopher M (ed) Logistics: The strategic issues. Chapman & Hall, London, pp 63–75
Handfield RB, Nichols EL (1999) Introduction to supply chain management. Prentice-Hall, Upper Saddle River, N.J
Werner H (2017) Supply chain management. Springer Fachmedien Wiesbaden, Wiesbaden
Chen IJ, Paulraj A (2004) Towards a theory of supply chain management: the constructs and measurements. J Oper Manag 22:119–150. https://doi.org/10.1016/j.jom.2003.12.007
Chopra S, Meindl P (2016) Supply chain management: strategy, planning, and operation, Sixth edition, global edition. Always learning. Pearson, Boston, Columbus, Indianapolis, New York, San Francisco, Amsterdam, Cape Town, Dubai, London, Madrid, Milan, Munich, Paris, Montréal, Toronto, Delhi, Mexico City, São Paulo, Sydney, Hong Kong, Seoul, Singapore, Taipai, Tokyo
Lambert DM, Cooper MC, Pagh JD (1998) Supply chain management: implementation issues and research opportunities. IJLM 9:1–20. https://doi.org/10.1108/09574099810805807
WCED (1987) Our common future. http://www.un-documents.net/ocf-02.htm. Accessed 2nd June, 2021
Robinson J (2004) Squaring the circle? Some thoughts on the idea of sustainable development. Ecol Econ 48:369–384. https://doi.org/10.1016/j.ecolecon.2003.10.017
Sauvé S, Bernard S, Sloan P (2016) Environmental sciences, sustainable development and circular economy: alternative concepts for trans-disciplinary research. Environ Dev 17:48–56. https://doi.org/10.1016/j.envdev.2015.09.002
Elkington J (1995) Who needs it?: market implications of sustainable lifestyles. SustainAbility Business Guide. SustainAbility, London
Elkington J (1997) Cannibals with forks: the triple bottom line of 21st century business. Capstone, Oxford
Seuring S, Müller M (2008) From a literature review to a conceptual framework for sustainable supply chain management. J Clean Prod 16:1699–1710. https://doi.org/10.1016/j.jclepro.2008.04.020
Carter CR, Rogers DS (2008) A framework of sustainable supply chain management: moving toward new theory. Int Jnl Phys Dist Log Manage 38:360–387. https://doi.org/10.1108/09600030810882816
Ahi P, Searcy C (2013) A comparative literature analysis of definitions for green and sustainable supply chain management. J Clean Prod 52:329–341. https://doi.org/10.1016/j.jclepro.2013.02.018
Govindan K, Soleimani H, Kannan D (2015) Reverse logistics and closed-loop supply chain: a comprehensive review to explore the future. Eur J Oper Res 240:603–626. https://doi.org/10.1016/j.ejor.2014.07.012
Homrich AS, Galvão G, Abadia LG, Carvalho MM (2018) The circular economy umbrella: trends and gaps on integrating pathways. J Clean Prod 175:525–543. https://doi.org/10.1016/j.jclepro.2017.11.064
Merli R, Preziosi M, Acampora A (2018) How do scholars approach the circular economy? A systematic literature review. J Clean Prod 178:703–722. https://doi.org/10.1016/j.jclepro.2017.12.112
Lieder M, Rashid A (2016) Towards circular economy implementation: a comprehensive review in context of manufacturing industry. J Clean Prod 115:36–51. https://doi.org/10.1016/j.jclepro.2015.12.042
Cardoso JL (2018) The circular economy: historical grounds. In: Delicado A, Domingos N, Sousa L de (eds) Changing societies: legacies and challenges. The diverse worlds of sustainability. Imprensa de Ciências Sociais, pp 115–127
Geisendorf S, Pietrulla F (2018) The circular economy and circular economic concepts-a literature analysis and redefinition. Thunderbird Int Bus Rev 60:771–782. https://doi.org/10.1002/tie.21924
Boulding KE (1966) The economics of the coming spaceship earth. In: Jarrett H (ed) Environmental Quality in a Growing Economy. Johns Hopkins University Press, Baltimore, pp 3–14
Ghisellini P, Cialani C, Ulgiati S (2016) A review on circular economy: the expected transition to a balanced interplay of environmental and economic systems. J Clean Prod 114:11–32. https://doi.org/10.1016/j.jclepro.2015.09.007
Pearce DW, Turner RK, Pearce DW (1990) Economics of natural resources and the environment, 15. print. Pearson Education, Harlow
Su B, Heshmati A, Geng Y, Yu X (2013) A review of the circular economy in China: moving from rhetoric to implementation. J Clean Prod 42:215–227. https://doi.org/10.1016/j.jclepro.2012.11.020
European Commission (2015) Circular Economy Package: questions & answers. https://ec.europa.eu/commission/presscorner/detail/en/MEMO_15_6204. Accessed 06 Jul 2020
European Parliamentary Research Service (2017) Circular economy. https://www.europarl.europa.eu/thinktank/infographics/circulareconomy/public/index.html. Accessed 06 Jul 2020
Korhonen J, Nuur C, Feldmann A, Birkie SE (2018) Circular economy as an essentially contested concept. J Clean Prod 175:544–552. https://doi.org/10.1016/j.jclepro.2017.12.111
Bressanelli G, Perona M, Saccani N (2018) Challenges in supply chain redesign for the circular economy: a literature review and a multiple case study. Int J Prod Res 57:7395–7422. https://doi.org/10.1080/00207543.2018.1542176
Suárez-Eiroa B, Fernández E, Méndez-Martínez G, Soto-Oñate D (2019) Operational principles of circular economy for sustainable development: linking theory and practice. J Clean Prod 214:952–961. https://doi.org/10.1016/j.jclepro.2018.12.271
Piwowar-Sulej K, Krzywonos M, Kwil I (2021) Environmental entrepreneurship – bibliometric and content analysis of the subject literature based on H-Core. J Clean Prod 295:126277. https://doi.org/10.1016/j.jclepro.2021.126277
van Eck NJ, Waltman L (2010) Software survey: VOSviewer, a computer program for bibliometric mapping. Scientometrics 84:523–538. https://doi.org/10.1007/s11192-009-0146-3
Hofmann F (2019) Circular business models: business approach as driver or obstructer of sustainability transitions? J Clean Prod 224:361–374. https://doi.org/10.1016/j.jclepro.2019.03.115
Nimsai S, Yoopetch C, Lai P (2020) Mapping the knowledge base of sustainable supply chain management: a bibliometric literature review. Sustainability 12:7348. https://doi.org/10.3390/su12187348
L Batista M, Dora JA, Garza-Reyes V, Kumar (2021) Improving the sustainability of food supply chains through circular economy practices – a qualitative mapping approach MEQ ahead-of-print. https://doi.org/10.1108/MEQ-09-2020-0211
Sundgren C (2022) Circular supply chain relationships for food redistribution. J Clean Prod 336:130393. https://doi.org/10.1016/j.jclepro.2022.130393
Ersoy P, Börühan G, Kumar S, Mangla JH, Hormazabal Y, Kazancoglu Ç, Lafcı (2022) Impact of information technology and knowledge sharing on circular food supply chains for green business growth. Bus Strat Env. https://doi.org/10.1002/bse.2988
Nandi S, Sarkis J, Hervani AA, Helms MM (2021) Redesigning supply chains using blockchain-enabled circular economy and COVID-19 experiences. Sustain Prod Consumption 27:10–22. https://doi.org/10.1016/j.spc.2020.10.019
Genovese A, Acquaye AA, Figueroa A, Koh SL (2017) Sustainable supply chain management and the transition towards a circular economy: evidence and some applications. Omega 66:344–357. https://doi.org/10.1016/j.omega.2015.05.015
Nasir MHA, Genovese A, Acquaye AA, Koh S, Yamoah F (2017) Comparing linear and circular supply chains: a case study from the construction industry. Int J Prod Econ 183:443–457. https://doi.org/10.1016/j.ijpe.2016.06.008
Leising E, Quist J, Bocken N (2018) Circular economy in the building sector: three cases and a collaboration tool. J Clean Prod 176:976–989. https://doi.org/10.1016/j.jclepro.2017.12.010
Mangla SK, Luthra S, Mishra N, Singh A, Rana NP, Dora M, Dwivedi Y (2018) Barriers to effective circular supply chain management in a developing country context. Prod Plan Contr 29:551–569. https://doi.org/10.1080/09537287.2018.1449265
Mishra JL, Hopkinson PG, Tidridge G (2018) Value creation from circular economy-led closed loop supply chains: a case study of fast-moving consumer goods. Prod Plan Contr 29:509–521. https://doi.org/10.1080/09537287.2018.1449245
Vlajic JV, Mijailovic R, Bogdanova M (2018) Creating loops with value recovery: empirical study of fresh food supply chains. Prod Plan Contr 29:522–538. https://doi.org/10.1080/09537287.2018.1449264
Yang M, Smart P, Kumar M, Jolly M, Evans S (2018) Product-service systems business models for circular supply chains. Prod Plan Contr 29:498–508. https://doi.org/10.1080/09537287.2018.1449247
Jia F, Yin S, Chen L, Chen X (2020) The circular economy in the textile and apparel industry: a systematic literature review. J Clean Prod 259:120728. https://doi.org/10.1016/j.jclepro.2020.120728
Vegter D, van Hillegersberg J, Olthaar M (2020) Supply chains in circular business models: processes and performance objectives. Resour Conserv Recycl 162:105046. https://doi.org/10.1016/j.resconrec.2020.105046
Vegter D, van Hillegersberg J, Olthaar M (2021) Performance measurement systems for circular supply chain management: current state of development. Sustainability 13:12082. https://doi.org/10.3390/su132112082
Amiri M, Hashemi-Tabatabaei M, Ghahremanloo M, Keshavarz-Ghorabaee M, Zavadskas EK, Salimi-Zavieh SG (2022) Evaluating barriers and challenges of circular supply chains using a decision-making model based on rough sets. Int J Environ SciTechnol. https://doi.org/10.1007/s13762-021-03899-7
Lavelli V (2021) Circular food supply chains – impact on value addition and safety. Trends Food Sci Technol 114:323–332. https://doi.org/10.1016/j.tifs.2021.06.008
Saroha M, Garg D, Luthra S (2021) Analyzing the circular supply chain management performance measurement framework: the modified balanced scorecard technique. Int J Syst Assur Eng Manag. https://doi.org/10.1007/s13198-021-01482-4
Walker AM, Vermeulen WJ, Simboli A, Raggi A (2021) Sustainability assessment in circular inter-firm networks: an integrated framework of industrial ecology and circular supply chain management approaches. J Clean Prod 286:125457. https://doi.org/10.1016/j.jclepro.2020.125457
Alonso-Muñoz S, González-Sánchez R, Siligardi C, García-Muiña FE (2021) Building exploitation routines in the circular supply chain to obtain radical innovations. Resources 10:22. https://doi.org/10.3390/resources10030022
Luthra S, Sharma M, Kumar A, Joshi S, Collins E, Mangla S (2022) Overcoming barriers to cross-sector collaboration in circular supply chain management: a multi-method approach. Transp Res Part E: Logist Transp Rev 157:102582. https://doi.org/10.1016/j.tre.2021.102582
Gebhardt M, Spieske A, Birkel H (2022) The future of the circular economy and its effect on supply chain dependencies: empirical evidence from a Delphi study. Transp Res Part E: Logist Transp Rev 157:102570. https://doi.org/10.1016/j.tre.2021.102570
Webster J, Watson RT (2002) Analyzing the past to prepare for the future: writing a literature review. MIS Q 26:8–23
Stock JR, Boyer SL (2009) Developing a consensus definition of supply chain management: a qualitative study. Int Jnl Phys Dist & Log Manage 39:690–711. https://doi.org/10.1108/09600030910996323
Bauwens T, Hekkert M, Kirchherr J (2020) Circular futures: what will they look like? Ecol Econ 175:106703. https://doi.org/10.1016/j.ecolecon.2020.106703
Ellen MacArthur Foundation (2013) Towards the circular economy Vol.1. https://www.ellenmacarthurfoundation.org/publications/towards-the-circular-economy-vol-1-an-economic-and-business-rationale-for-an-accelerated-transition. Accessed 07 Jul 2020
Howard M, Hopkinson P, Miemczyk J (2018) The regenerative supply chain: a framework for developing circular economy indicators. Int J Prod Res 57:7300–7318. https://doi.org/10.1080/00207543.2018.1524166
Morseletto P (2020) Restorative and regenerative: exploring the concepts in the circular economy. J Ind Ecol 24:763–773. https://doi.org/10.1111/jiec.12987
Zhang D, Huang X, Wen Y, Trivedi P, Joghee S (2021) Sustainable circular business model for transparency and uncertainty reduction in supply chain management. JTAER 16:959–975. https://doi.org/10.3390/jtaer16040054
D’Amato D, Droste N, Allen B, Kettunen M, Lähtinen K, Korhonen J, Leskinen P, Matthies BD, Toppinen A (2017) Green, circular, bio economy: a comparative analysis of sustainability avenues. J Clean Prod 168:716–734. https://doi.org/10.1016/j.jclepro.2017.09.053
Korhonen J, Honkasalo A, Seppälä J (2018) Circular economy: the concept and its limitations. Ecol Econ 143:37–46. https://doi.org/10.1016/j.ecolecon.2017.06.041
Schroeder P, Anggraeni K, Weber U (2019) The relevance of circular economy practices to the sustainable development goals. J Ind Ecol 23:77–95. https://doi.org/10.1111/jiec.12732
Richardson J (2008) The business model: an integrative framework for strategy execution. Strat Change 17:133–144. https://doi.org/10.1002/jsc.821
Nußholz J (2017) Circular business models: defining a concept and framing an emerging research field. Sustainability 9:1810. https://doi.org/10.3390/su9101810
Manninen K, Koskela S, Antikainen R, Bocken N, Dahlbo H, Aminoff A (2018) Do circular economy business models capture intended environmental value propositions? J Clean Prod 171:413–422. https://doi.org/10.1016/j.jclepro.2017.10.003
Morseletto P (2020) Targets for a circular economy. Resour Conserv Recycl 153:104553. https://doi.org/10.1016/j.resconrec.2019.104553
Kalmykova Y, Sadagopan M, Rosado L (2018) Circular economy – from review of theories and practices to development of implementation tools. Resour Conserv Recycl 135:190–201. https://doi.org/10.1016/j.resconrec.2017.10.034
Loiseau E, Saikku L, Antikainen R, Droste N, Hansjürgens B, Pitkänen K, Leskinen P, Kuikman P, Thomsen M (2016) Green economy and related concepts: an overview. J Clean Prod 139:361–371. https://doi.org/10.1016/j.jclepro.2016.08.024
Govindan K, Hasanagic M (2018) A systematic review on drivers, barriers, and practices towards circular economy: a supply chain perspective. Int J Prod Res 56:278–311. https://doi.org/10.1080/00207543.2017.1402141
McDonough W, Braungart M (2009) Cradle to cradle: remaking the way we make things. Vintage Books, London
Weetman C (2017) A circular economy handbook for business and supply chains: Repair, remake, redesign, rethink, 1st edn. Kogan Page, London, United Kingdom
Govindan K, Soleimani H (2017) A review of reverse logistics and closed-loop supply chains: a Journal of Cleaner Production focus. J Clean Prod 142:371–384. https://doi.org/10.1016/j.jclepro.2016.03.126
Farooque M, Zhang A, Liu Y, Hartley JL (2022) Circular supply chain management: performance outcomes and the role of eco-industrial parks in China. Transp Res Part E: Logist Transp Rev 157:102596. https://doi.org/10.1016/j.tre.2021.102596
Moreno M, de los Rios C, Rowe Z, Charnley F (2016) A conceptual framework for circular design. Sustainability 8:937. https://doi.org/10.3390/su8090937
Ellen MacArthur Foundation (2017) What is the circular economy? https://www.ellenmacarthurfoundation.org/circular-economy/what-is-the-circular-economy. Accessed 10.07.20
Gaur J, Subramoniam R, Govindan K, Huisingh D (2017) Closed-loop supply chain management: From conceptual to an action oriented framework on core acquisition. J Clean Prod 167:1415–1424. https://doi.org/10.1016/j.jclepro.2016.12.098
Bocken NMP, de Pauw I, Bakker C, van der Grinten B (2016) Product design and business model strategies for a circular economy. J Ind Prod Eng 33:308–320. https://doi.org/10.1080/21681015.2016.1172124
Jain S, Jain NK, Metri B (2018) Strategic framework towards measuring a circular supply chain management. Benchmarking 25:3238–3252. https://doi.org/10.1108/BIJ-11-2017-0304
van Engelenhoven T, Kassahun A, Tekinerdogan B (2021) Circular business processes in the state-of-the-practice: a survey study. Sustainability 13:13307. https://doi.org/10.3390/su132313307
Ribeiro PCC, Carpilovsky LD, Gomes CFS (2021) Circular economy and supply chain management: publications and main themes. In: Tavares Thomé AM, Barbastefano RG, Scavarda LF et al (eds) Industrial Engineering and Operations Management, vol 367. Springer International Publishing, Cham, pp 181–192
Abideen AZ, Pyeman J, Sundram VPK, Tseng M-L, Sorooshian S (2021) Leveraging capabilities of technology into a circular supply chain to build circular business models: a state-of-the-art systematic review. Sustainability 13:8997. https://doi.org/10.3390/su13168997
Tsolakis N, Harrington TS, Srai JS (2021) Digital supply network design: a Circular Economy 4.0 decision-making system for real-world challenges. Prod Plan Contr 1–26. https://doi.org/10.1080/09537287.2021.1980907
Sawe FB, Kumar A, Garza-Reyes JA, Agrawal R (2021) Assessing people-driven factors for circular economy practices in small and medium-sized enterprise supply chains: Business strategies and environmental perspectives. Bus Strat Env 30:2951–2965. https://doi.org/10.1002/bse.2781
Calzolari T, Genovese A, Brint A (2022) Circular economy indicators for supply chains: a systematic literature review. Environ Sustain Ind 13:100160. https://doi.org/10.1016/j.indic.2021.100160
de Oliveira CT, Dantas TET, Soares SR (2021) Nano and micro level circular economy indicators: assisting decision-makers in circularity assessments. Sustain Prod Consumption 26:455–468. https://doi.org/10.1016/j.spc.2020.11.024
Montag L, Klünder T, Steven M (2021) Paving the way for circular supply chains: Conceptualization of a circular supply chain maturity framework. Front Sustain 2. https://doi.org/10.3389/frsus.2021.781978
Bjørnbet MM, Skaar C, Fet AM, Schulte KØ (2021) Circular economy in manufacturing companies: a review of case study literature. J Clean Prod 294:126268. https://doi.org/10.1016/j.jclepro.2021.126268
Calzolari T, Genovese A, Brint A (2021) The adoption of circular economy practices in supply chains – An assessment of European Multi-National Enterprises. J Clean Prod 312:127616. https://doi.org/10.1016/j.jclepro.2021.127616
Mura M, Longo M, Zanni S (2020) Circular economy in Italian SMEs: a multi-method study. J Clean Prod 245:118821. https://doi.org/10.1016/j.jclepro.2019.118821
Funding
Open Access funding enabled and organized by Projekt DEAL.
Author information
Authors and Affiliations
Contributions
LM confirms sole responsibility for the following: study conception and design, data collection, analysis and interpretation of results, and manuscript preparation.
Corresponding author
Ethics declarations
Competing Interests
The author declares no competing interests.
Rights and permissions
Open Access This article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/.
About this article
Cite this article
Montag, L. Circular Economy and Supply Chains: Definitions, Conceptualizations, and Research Agenda of the Circular Supply Chain Framework. Circ.Econ.Sust. 3, 35–75 (2023). https://doi.org/10.1007/s43615-022-00172-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s43615-022-00172-y