Abstract
In this paper, a combined shielding structure for the oil tank of an OSFSZ-250000KVA/220 kV transformer is proposed and optimized to reduce the magnetic flux leakage and the stray losses. Firstly, the shielding effects of the transverse and longitudinal shielding structures are studied based on three-dimensional frequency-domain nonlinear finite element method. Secondly, the combined shielding structure is proposed with copper shielding introduced at both ends of the transverse magnetic shielding to effectively reduce the magnetic flux leakage of the oil tank. Therefore, the eddy current loss in the oil tank can be significantly reduced. Finally, Taguchi method is used to optimize the structural parameters of the combination shielding to reduce both the oil tank eddy current losses and the shielding costs. The study in this paper can provide guidance for the design of large capacity power transformers, and has important engineering significance.
Similar content being viewed by others
References
Al-Abadi A, Gamil A, Schatzl F (2019) Optimum shielding design for losses and noise reduction in power transformers. In: 2019 6th international advanced research workshop on transformers (ARWtr), 2019, pp 25–30
Wu Y, Liu L, Shi C, Ma K, Li Y, Mu H (2019) Research on measurement technology of transformer no-load loss based on internet of things. In: 2019 IEEE 8th international conference on advanced power system automation and protection (APAP), 2019, pp 150–153
Ahn HM, Lee BJ, Hahn SC (2011) An efficient investigation of coupled electromagnetic-thermal-fuild numerical for temperature rise prediction of power transformer. In: 2011 international conference on electrical machines and systems (ICEMS), 2011, pp. 1-4
Zhang T, Cai JD (2008) Study on life prediction method of oil immersed power transformer. In: 2008 annual report conference on electrical insulation and dielectric phenomena, 2008, pp 486–489
Guo J, Zhang Z, Gao W, Hu H, Wang D, Mao Y (2019) Overheating risk warning model based on thermal circuit model and load forecasting for distribution transformers. In: 2019 IEEE sustainable power and energy conference (iSPEC), 2019, pp 2891–2895
Song Z, Gong K, Mou K, Zhu Y, Xiang B, Zhou C (2011)The simulation of stray losses in a power transformer based on FEM. In: 2011 international conference on electrical and control engineering, 2011, pp 4199-4201
Li LN, Fu WN, Ho SL, Niu SX, Li Y (2014) Numerical analysis and optimization of lobe-type magnetic shielding in a 334 MVA single-phase auto-transformer. IEEE Trans Magn 50(11):8500504
Marketos F, Marnay D, Ngnegueu T (2012) Experimental and numerical investigation of flux density distribution in the individual packets of a 100 kVA transformer core. IEEE Trans Magn 48(4):1677–1680
Zhao X, Cao Y, Cheng Z, Forghani B, Liu L, Wang J (2020) Experimental and numerical study on stray loss in laminated magnetic shielding under 3-D AC–DC hybrid excitations for HVDC transformers. IEEE Access 8:144432–144441
Dasara S, Mishra VP (2017) Shielding measures of power transformer to mitigate stray loss and hot spot through coupled 3D FEA. High Volt 2(4):267–273
Chen YB, Yang JY, Yu HN, Tang RY (1994) Study on eddy current losses and shielding measures in large power transformers. IEEE Trans Magn 30(5):3068–3071
Olivares JC, Liu YL, Canedo JM, Escarela-Perez R, Driesen J, Moreno P (2003) Reducing losses in distribution transformers. IEEE Trans Power Deliv 18(3):821–826
Moghaddami M, Sarwat A, Leon FD (2017) Reduction of stray loss in power transformers using horizontal magnetic wall shunts. IEEE Trans Magn53(2) Art. no. 8100607
Zhang L, Shuai Y, Chen R, Zhang Z, Zhang S (2018) Optimization and analysis on the key insulation structure of 500kV radial split transformer. In: 2018 12th international conference on the properties and applications of dielectric materials (ICPADM 2018), 2018, pp 844–847
Wang T, Yuan W, Fu D, Yuan J (2020) Improvement of magnetic shielding for transformers based on the magnetic flux characteristics at shielding ends. IEEE Trans Magn 56(1) Art. no. 7501804
Sarshenas M, Firouzeh ZH (2015) A robust hybrid taguchi-gradient optimization method for the calculation of analytical green’s functions of microstrip structures. IEEE Antennas Wirel Propag Lett 14:1366–1368
Yuan J, Xue H, Li J, Cao L, Jia Y (2020) The application of Taguchi method in electromagnetic shielding simulation. In: 2020 21st international conference on electronic packaging technology (IC EPT 2020), 2020, pp 1–3
Acknowledgements
This work was supported by the National Natural Science Foundation of China under Grant 52107007, and by the Natural Science Foundation of Tianjin under Grant 18JCQNJC70500 and 19JCQNJC03600.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Li, L., Hu, S., Zhao, Y. et al. Design Optimization of a Combined Shielding Structure for a High Impedance Auto-Transformer. J. Electr. Eng. Technol. 18, 3569–3580 (2023). https://doi.org/10.1007/s42835-023-01422-1
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s42835-023-01422-1