Abstract
This paper investigates some of the disadvantages of Radio Frequency Micro Electro Mechanical System (RF MEMS) switches, such as high actuation voltage and high switching time. RF MEMS switches are among the most widely used technologies since the past two decades owing to their abundant advantages such as low insertion loss, high isolation loss, low power consumption, and very high Q. In this paper, we focus on reducing the high actuation voltage and high switching time; a novel design of an RF MEMS metal contact switch was proposed and designed using the software Intellisuite 8.7v, and simulations were performed by finite element modeling. Analysis was carried out by the electrostatic actuation method. The actuation voltage depends on the spring constant, area of the actuation electrode, and air gap. From the simulation, we obtained a very low actuation voltage (1.2 V) and low switching time (approximately 7.98 µs).
Similar content being viewed by others
References
R. Raman, T. Shanmuganantham, Conjoined rectangular beam shaped RF micro-electro-mechanical system switch for wireless applications. Int. J. Adv. Microw. Technol. (IJAMT) 1(1), 10–14 (2016)
R. Raman, T. Shanmuganantham, Frequency reconfiguration of microstrip patch antenna with serpentine spring shaped RF MEMS switch. Int. J. Adv. Microw. Technol. (IJAMT) 2(1), 89–92 (2017)
A. Attaran, R. Rashidzadeh, Ultra low actuation voltage RF MEMS switch. Micro Nano Syst. Lett. 3(7) (2015)
R. Raman, T. Shanmuganantham, Design and analysis of RF MEMS switch with uniform folded spring structure for wireless applications. Int. J. Control Theory Appl. (IJCTA) 10(37), 273–280 (2017)
A.S. Khan, T. Shanmuganantham, Arc-shaped cantilever beam RF MEMS switch for low actuation voltage, in IEEE International Conference on Circuits and Systems (2017)
A.S. Khan, T. Shanmuganantham, Simulation and analysis of RF MEMS cantilever switch for low voltage actuation, in IEEE International Conference on Circuits and Systems (2017)
R. Raman, T. Shanmuganantham, Design and modeling of RF MEMS metal contact switch for wireless applications, in International Conference on Control, Instruments, Communication and Computational Technologies (ICCICCT) (2016). https://doi.org/10.1109/ICCICCT.2016.7987957]
G.M. Rebeiz, J.B. Muldavin, RF MEMS switches and switch circuits. IEEE Microw. Mag. (2001). https://doi.org/10.1109/6668.969936
V.K. Varadan, K.J. Vinoy, K.A. Jose, RF MEMS and Their Applications (Wiley, New Jersey, 2003)
G. Rebeiz, RFMEMS Theory Design and Technology (Wiley, New Jersey, 2003)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Khan, A.S., Shanmuganantham, T. Design and Analysis of RF MEMS Cantilever Switches for Parameter Enhancement. Trans. Electr. Electron. Mater. 19, 179–187 (2018). https://doi.org/10.1007/s42341-018-0041-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s42341-018-0041-9