Abstract
The prediction accuracy of existing models of the rolling force of a thick plate is always very low. To address this problem, a high-precision genetic algorithm–backpropagation network (GA–BP) model of deformation resistance was built, and its integration with the traditional fitted model was further established. Then, a novel rolling force model was obtained by embedding the integration model of deformation resistance in the original model of rolling force. According to this research idea, the industrial data are normalized at first. On this basis, the interactions among the process parameters were disclosed through the variance analysis, and then described by various virtual factors. These factors are set as part of input parameters. Then, the optimal structure of the GA–BP model of deformation resistance was determined and an integration model of deformation resistance was built. Finally, a novel rolling force model is obtained by substituting the traditional fitted deformation resistance into the Sims model with the integration model of the deformation resistance. The results proves that the introduction of virtual factors can increase the hit rate of ± 5% from 75.8% to 78% and can reduce the root mean square error from 4.72% to 4.48%. Besides, it is found that the mean relative error of the traditional fitted deformation resistance is 0.142, while that of the modified deformation resistance is only 0.03. In addition, the mean relative error in the original rolling force model is 0.145, while that of the present model is only 0.03.
Similar content being viewed by others
References
W.H. Yu, B.B. Zhou, J.J. Su, H.T. Li, J.P. Hu, J. Chen, China Metallurgy 22 (2012) No. 11, 21–25.
J. Liang, Y. Feng, J. Yin, D. Cang, H. Li, Adv. Mater. Res. 652–654 (2013) 2043–2047.
C.S. Wang, H.X. Wang, J.B. Li, J. Zhang, Adv. Mater. Res. 314–316 (2011) 409–414.
B.M. Wei, J.X. Wang, X.Y. Cui, Z.H. Bai, Journal of Plasticity Engineering 29 (2022) No. 1, 162–166.
Y. Saito, ISIJ Int. 27 (1987) 419–424.
J. Li, H. Yu, X.D. Cheng, L. Peng, Q.N. Shi, W.B. Ren, Rare Met. Mater. Eng. 45 (2016) 393–398.
W.G. Li, L. Feng, S.D. Wang, B.Q. Yan, Iron and Steel 52 (2017) No. 6, 61–66+93.
X.Q. Xie, W.G. Li, W.P. Fu, S.L. Wan, Metallurgical Industry Automation 43 (2019) No. 2, 29–34+41.
Y. Saito, T. Enami, T. Tanaka, ISIJ Int. 25 (1985) 1146–1155.
J.S. Wang, Z.Y. Jiang, A.K. Tieu, X.H. Liu, G.D. Wang, J. Mater. Process. Technol. 162–163 (2005) 585-590.
J.S. Son, D.M. Lee, I.S. Kim, S.G. Choi, J. Mater. Process. Technol. 164–165(2005) 1612–1617.
M. Bagheripoor, H. Bisadi, Appl. Math. Model. 37 (2013) 4593–4607.
L.Y. Fu, H.J. Li, Q.X. Huang, Journal of Taiyuan University of Science and Technology 4 (2013) No. 3, 199–202.
Y. Chen, F. Chen, L. Peng, C. He, C. Li, in: 2020 7th International Forum on Electrical Engineering and Automation, IFEEA, Hefei, China, 2020, pp. 966–971.
Y. Ren, N. Su, J. Yang, X. Gao, H. Wang, M. Yue, D. Lv, in: 2021 33rd Chinese Control and Decision Conference, CCDC, Kunming, China, 2021, pp. 624–629.
S. Shen, D. Guye, X. Ma, S. Yue, N. Armanfard, Mach. Learn. Appl. 7 (2022) 100245.
X. Tang, Z. Wang, L. Deng, X. Wang, J. Long, X. Jiang, J. Jin, J. Xia, Materials 15 (2022) 7019.
D.X. Hou, W.S. Gang, X. Wei, C.L. Tang, Journal of Shanghai Jiaotong University 45(2011) 924–928.
J.M. Yang, F.Y. Ma, H.J. Che, W.H. Wang, Y. Chen, Acta Metrolog. Sin. 34 (2013) No. 6, 532–536.
J.Y. Liu, X.X. Liu, B.T. Le, Complexity 2019 (2019) 3476521.
L. Chen, W. Sun, A. He, T. Yuan, J. Shi, Y. Qiang, Metals 12 (2022) 924.
S.H. Zhang, L.Z. Che, X.Y. Liu, Math. Problems Eng. 2021 (2021) 2500636.
X.R. Jiang, S.H. Zhang, C.J. Wang, Y.X. Li, W.H. Tian, Journal of Harbin Institute of Technology 52 (2020) No. 1, 41–48.
Y.K. Sun, Model and control of hot and cold strip mill, Metallurgical Industry Press, Beijing, China, 2010.
W. Ma, W.G. Li, Y.T. Zhao, B.K. Yan, J. Iron Steel Res. 31 (2019) 805–815.
Y. Wang, S.L. Sui, Mathematical statistics and MATLAB data analysis, Tsinghua University Press, Beijing, China, 2014.
S.S. Mao, Y.M. Chen, X.L. Pu, Probability theory and mathematical statistics tutorial, Higher Education Press, Beijing, China, 2019.
Y. Ji, S. Liu, M. Zhou, Z. Zhao, X. Guo, L. Qi, Inf. Sci. 589 (2022) 360–375.
Z.M. Deng, Research on forecasting for quantity of commodity barcodes registration based on ARIMA and network, South China University of Technology, Guangzhou, Guangdong, 2016.
D.Q. Gao, Chinese Journal of Computers 21 (1998) 80–86.
L.M. Zhang, Models and applications of artificial networks, Fudan University Press, Shanghai, China, 1993.
J.M. Hernández-Lobato, R.P. Adams, in: International Conference on Machine Learning, PMLR, 2015, pp. 1861–1869.
J.M. Yang, J.Q. Gu, X.Y. Yan, H.J. Che, Min. Metall. Eng. 35 (2015) 111–115.
C.Q. Zhang, J.G. Zhen, J. Qian, Application Research of Computers 28 (2011) 819–822.
W. Peng, J.G. Ding, D.H. Zhang, D.W. Zhao, J. Braz. Soc. Mech. Sci. Eng. 39 (2017) 5057–5067.
Acknowledgments
The study was funded by the National Natural Science Foundation of China (Grant Nos. 52274388, U1960105 and 52074187), and the authors express gratitude to reviewers for precious suggestions.
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Zhang, Sh., Li, Y., Che, Lz. et al. A new integrated model of deformation resistance and its application in prediction of rolling force of a thick plate. J. Iron Steel Res. Int. 31, 882–893 (2024). https://doi.org/10.1007/s42243-023-01084-3
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s42243-023-01084-3