Abstract
Composite materials and especially polymer composites are widely used in daily life and different industries due to their vastly different properties and design flexibility. It is known that the properties of the composites are strongly related to the properties of its constituents. However, it has been reported in many studies, experimentally and by simulations, that the characteristics of the composites do not follow the rule of mixing. It means that in addition to properties of the constituents, there are other parameters affecting the final physicochemical properties of composites. The interfacial interactions between fillers and host is one of the factors which can strongly affect the properties of the composite. In this review, we summarized the type of interactions between the constituents, their improvement techniques, interaction measurement methods, and the effects of interfacial interactions on thermal, mechanical, and electrical properties of composites.
Similar content being viewed by others
References
Henry A (2013) Thermal transport in polymers. Annu Rev Heat Transfer 17:485–520
Alexandre M, Dubois P (2000) Polymer-layered silicate nanocomposites: preparation, properties and uses of a new class of materials. Mater Sci Eng R 28(1):1–63
Zhu J, Wilkie CA (2000) Thermal and fire studies on polystyrene–clay nanocomposites. Polym Int 49(10):1158–1163
Gilman JW (1999) Flammability and thermal stability studies of polymer layered-silicate (clay) nanocomposites. Appl Clay Sci 15(1):31–49
Heinrich G, Klüppel M, Vilgis TA (2002) Reinforcement of elastomers. Curr Opin Solid State Mater Sci 6(3):195–203
Huang H, Liu C, Wu Y, Fan S (2005) Aligned carbon nanotube composite films for thermal management. Adv Mater 17(13):1652–1656
Biercuk M, Llaguno MC, Radosavljevic M, Hyun J, Johnson AT, Fischer JE (2002) Carbon nanotube composites for thermal management. Appl Phys Lett 80(15):2767–2769
Choi E, Brooks J, Eaton D, Al-Haik M, Hussaini M, Garmestani H, Li D, Dahmen K (2003) Enhancement of thermal and electrical properties of carbon nanotube polymer composites by magnetic field processing. J Appl Phys 94(9):6034–6039
Diani J, Fayolle B, Gilormini P (2009) A review on the Mullins effect. Eur Polym J 45(3):601–612
Mai Y-W, Yu Z-Z (2006) Polymer nanocomposites. Woodhead Publishing, Cambridge
Kropka JM, Putz KW, Pryamitsyn V, Ganesan V, Green PF (2007) Origin of dynamical properties in PMMA–C60 nanocomposites. Macromolecules 40(15):5424–5432
Sichel EK (1982) Carbon black-polymer composites: the physics of electrically conducting composites. Marcel Dekker Inc, New York
Hamed GR (2000) Reinforcement of rubber. Rubber Chem Technol 73(3):524–533
Adhikari B, Ghosh AK, Maiti S (2000) Developments in carbon black for rubber reinforcement. J Polym Mater 17(2):101–125
Hamed G (2007) Rubber reinforcement and its classification. Rubber Chem Technol 80(3):533–544
Rahmat M, Hubert P (2011) Carbon nanotube–polymer interactions in nanocomposites: a review. Compos Sci Technol 72(1):72–84
Tang LG, Kardos JL (1997) A review of methods for improving the interfacial adhesion between carbon fiber and polymer matrix. Polym Compos 18(1):100–113
Chen L, Zheng K, Tian X, Hu K, Wang R, Liu C, Li Y, Cui P (2009) Double glass transitions and interfacial immobilized layer in in-situ-synthesized poly (vinyl alcohol)/silica nanocomposites. Macromolecules 43(2):1076–1082
Chen M, Qu H, Zhu J, Luo Z, Khasanov A, Kucknoor AS, Haldolaarachchige N, Young DP, Wei S, Guo Z (2012) Magnetic electrospun fluorescent polyvinylpyrrolidone nanocomposite fibers. Polymer 53(20):4501–4511
Robertson CG, Roland C (2008) Glass transition and interfacial segmental dynamics in polymer-particle composites. Rubber Chem Technol 81(3):506–522
Jouault N, Vallat P, Dalmas F, Said S, Jestin J, Boué F (2009) Well-dispersed fractal aggregates as filler in polymer–silica nanocomposites: long-range effects in rheology. Macromolecules 42(6):2031–2040
Rittigstein P, Priestley RD, Broadbelt LJ, Torkelson JM (2007) Model polymer nanocomposites provide an understanding of confinement effects in real nanocomposites. Nat Mater 6(4):278–282
Qian D (2003) Load transfer mechanism in carbon nanotube ropes. Compos Sci Technol 63(11):1561–1569
Yu M-F, Yakobson BI, Ruoff RS (2000) Controlled sliding and pullout of nested shells in individual multiwalled carbon nanotubes. J Phys Chem B 104(37):8764–8767
Qian D, Dickey EC, Andrews R, Rantell T (2000) Load transfer and deformation mechanisms in carbon nanotube-polystyrene composites. Appl Phys Lett 76(20):2868–2870
Jang BZ (1994) Advanced polymer composites: principles and applications. ASM International, Materials Park, OH 44073-0002, USA, 1994 305
Thostenson ET, Chou T-W (2002) Aligned multi-walled carbon nanotube-reinforced composites: processing and mechanical characterization. J Phys D Appl Phys 35(16):L77
Crosby AJ, Lee JY (2007) Polymer nanocomposites: the “nano” effect on mechanical properties. Polym Rev 47(2):217–229
Cadek M, Coleman J, Ryan K, Nicolosi V, Bister G, Fonseca A, Nagy J, Szostak K, Beguin F, Blau W (2004) Reinforcement of polymers with carbon nanotubes: the role of nanotube surface area. Nano Lett 4(2):353–356
Yang X, Tu Y, Li L, Shang S, X-m T (2010) Well-dispersed chitosan/graphene oxide nanocomposites. ACS Appl Mater Interfaces 2(6):1707–1713
Tsutsumi N, Takeuchi N, Kiyotsukuri T (1991) Measurement of thermal diffusivity of filler-polymide composites by flash radiometry. J. Polym. Sci., Part B: Polym Phys. 29(9):1085–1093
Wu H, Drzal LT (2013) High thermally conductive graphite nanoplatelet/polyetherimide composite by precoating: effect of percolation and particle size. Polym Compos 34(12):2148–2153
Zhou W, Qi S, Tu C, Zhao H, Wang C, Kou J (2007) Effect of the particle size of Al2O3 on the properties of filled heat-conductive silicone rubber. J Appl Polym Sci 104(2):1312–1318
Li T-L, Hsu SL-C (2010) Enhanced thermal conductivity of polyimide films via a hybrid of micro-and nano-sized boron nitride. J Phys Chem B 114(20):6825–6829
Kemaloglu S, Ozkoc G, Aytac A (2010) Thermally conductive boron nitride/SEBS/EVA ternary composites: “processing and characterization”. Polym Compos 31(8):1398–1408
Fu J, Shi L, Zhang D, Zhong Q, Chen Y (2010) Effect of nanoparticles on the performance of thermally conductive epoxy adhesives. Polym Eng Sci 50(9):1809–1819
Pashayi K, Fard HR, Lai F, Iruvanti S, Plawsky J, Borca-Tasciuc T (2012) High thermal conductivity epoxy-silver composites based on self-constructed nanostructured metallic networks. J Appl Phys 111(10):104310
Chen H, Ginzburg VV, Yang J, Yang Y, Liu W, Huang Y, Du L, Chen B (2016) Thermal conductivity of polymer-based composites: fundamentals and applications. Prog Polym Sci 59:41–85
Radford K (1971) The mechanical properties of an epoxy resin with a second phase dispersion. J Mater Sci 6(10):1286–1291
Spanoudakis J, Young R (1984) Crack propagation in a glass particle-filled epoxy resin. J Mater Sci 19(2):473–486
Ji XL, Jing JK, Jiang W, Jiang BZ (2002) Tensile modulus of polymer nanocomposites. Polym Eng Sci 42(5):983–993
Mishra S, Sonawane S, Singh R (2005) Studies on characterization of nano CaCO3 prepared by the in situ deposition technique and its application in PP-nano CaCO3 composites. J Polym Sci Part B Polym Phys 43(1):107–113
Douce J, Boilot J-P, Biteau J, Scodellaro L, Jimenez A (2004) Effect of filler size and surface condition of nano-sized silica particles in polysiloxane coatings. Thin Solid Films 466(1):114–122
Fu S-Y, Feng X-Q, Lauke B, Mai Y-W (2008) Effects of particle size, particle/matrix interface adhesion and particle loading on mechanical properties of particulate–polymer composites. Composites Part B 39(6):933–961
Liao K, Li S (2001) Interfacial characteristics of a carbon nanotube–polystyrene composite system. Appl Phys Lett 79(25):4225–4227
Suhr J, Koratkar N, Keblinski P, Ajayan P (2005) Viscoelasticity in carbon nanotube composites. Nat Mater 4(2):134–137
Du M, Guo B, Lei Y, Liu M, Jia D (2008) Carboxylated butadiene–styrene rubber/halloysite nanotube nanocomposites: interfacial interaction and performance. Polymer 49(22):4871–4876
Lordi V, Yao N (2000) Molecular mechanics of binding in carbon-nanotube–polymer composites. J Mater Res 15(12):2770–2779
Liu W, Wang Y, Wang P, Li Y, Jiang Q, Hu X, Wei Y, Qiu Y, Shahabadi SIS, Lu X (2017) A biomimetic approach to improve the dispersibility, interfacial interactions and toughening effects of carbon nanofibers in epoxy composites. Composites Part B 113:197–205
Mu M, Winey KI (2007) Improved load transfer in nanotube/polymer composites with increased polymer molecular weight. J Phys Chem C 111(48):17923–17927
Gao J, Loi MA, de Carvalho EJF, dos Santos MC (2011) Selective wrapping and supramolecular structures of polyfluorene–carbon nanotube hybrids. ACS Nano 5(5):3993–3999
Nish A, Hwang J-Y, Doig J, Nicholas RJ (2007) Highly selective dispersion of single-walled carbon nanotubes using aromatic polymers. Nat Nanotechnol 2(10):640–646
Hersam MC (2008) Progress towards monodisperse single-walled carbon nanotubes. Nat Nanotechnol 3(7):387–394
Hirsch A (2002) Functionalization of single-walled carbon nanotubes. Angew Chem Int Ed 41(11):1853–1859
McCarthy B, Coleman J, Czerw R, Dalton A, In Het Panhuis M, Maiti A, Drury A, Bernier P, Nagy J, Lahr B (2002) A microscopic and spectroscopic study of interactions between carbon nanotubes and a conjugated polymer. J Phys Chem B 106(9):2210–2216
Zheng M, Jagota A, Semke ED, Diner BA, Mclean RS, Lustig SR, Richardson RE, Tassi NG (2003) DNA-assisted dispersion and separation of carbon nanotubes. Nat Mater 2(5):338–342
Tallury SS, Pasquinelli MA (2010) Molecular dynamics simulations of polymers with stiff backbones interacting with single-walled carbon nanotubes. J Phys Chem B 114(29):9349–9355
Sánchez-Pomales G, Pagán-Miranda C, Santiago-Rodríguez L, Cabrera CR (2010) DNA-wrapped carbon nanotubes: from synthesis to applications. Carbon nanotubes. InTech Education and Publishing, Vukovar, 721–748
Zheng M, Jagota A, Strano MS, Santos AP, Barone P, Chou SG, Diner BA, Dresselhaus MS, Mclean RS, Onoa GB (2003) Structure-based carbon nanotube sorting by sequence-dependent DNA assembly. Science 302(5650):1545–1548
Kusner I, Srebnik S (2006) Conformational behavior of semi-flexible polymers confined to a cylindrical surface. Chem Phys Lett 430(1):84–88
Xie Y, Soh A (2005) Investigation of non-covalent association of single-walled carbon nanotube with amylose by molecular dynamics simulation. Mater Lett 59(8):971–975
Gao H, Kong Y (2004) Simulation of DNA-nanotube interactions. Annu Rev Mater Res 34:123–150
Ma Y, Ali SR, Dodoo AS, He H (2006) Enhanced sensitivity for biosensors: multiple functions of DNA-wrapped single-walled carbon nanotubes in self-doped polyaniline nanocomposites. J Phys Chem B 110(33):16359–16365
Ning N, Fu S, Zhang W, Chen F, Wang K, Deng H, Zhang Q, Fu Q (2012) Realizing the enhancement of interfacial interaction in semicrystalline polymer/filler composites via interfacial crystallization. Prog Polym Sci 37(10):1425–1455
Shaffer MS, Fan X, Windle A (1998) Dispersion and packing of carbon nanotubes. Carbon 36(11):1603–1612
Hamon MA, Chen J, Hu H, Chen Y, Itkis ME, Rao AM, Eklund PC, Haddon RC (1999) Dissolution of single-walled carbon nanotubes. Adv Mater 11(10):834–840
Bahr JL, Tour JM (2002) Covalent chemistry of single-wall carbon nanotubes. J Mater Chem 12(7):1952–1958
Zhu J, Kim J, Peng H, Margrave JL, Khabashesku VN, Barrera EV (2003) Improving the dispersion and integration of single-walled carbon nanotubes in epoxy composites through functionalization. Nano Lett 3(8):1107–1113
Georgakilas V, Kordatos K, Prato M, Guldi DM, Holzinger M, Hirsch A (2002) Organic functionalization of carbon nanotubes. JACS 124(5):760–761
Eitan A, Jiang K, Dukes D, Andrews R, Schadler LS (2003) Surface modification of multiwalled carbon nanotubes: toward the tailoring of the Interface in polymer composites. Chem Mater 15(16):3198–3201
Ramanathan T, Abdala A, Stankovich S, Dikin D, Herrera-Alonso M, Piner R, Adamson D, Schniepp H, Chen X, Ruoff R (2008) Functionalized graphene sheets for polymer nanocomposites. Nat Nanotechnol 3(6):327–331
Varol HS, Sánchez MA, Lu H, Baio JE, Malm C, Encinas N, Mermet-Guyennet MR, Martzel N, Bonn D, Bonn M (2015) Multiscale effects of interfacial polymer confinement in silica nanocomposites. Macromolecules 48(21):7929–7937
Roy N, Sengupta R, Bhowmick AK (2012) Modifications of carbon for polymer composites and nanocomposites. Prog Polym Sci 37(6):781–819
Velasco-Santos C, Martínez-Hernández AL, Fisher FT, Ruoff R, Castaño VM (2003) Improvement of thermal and mechanical properties of carbon nanotube composites through chemical functionalization. Chem Mater 15(23):4470–4475
Koval’chuk AA, Shevchenko VG, Shchegolikhin AN, Nedorezova PM, Klyamkina AN, Aladyshev AM (2008) Effect of carbon nanotube functionalization on the structural and mechanical properties of polypropylene/MWCNT composites. Macromolecules 41(20):7536–7542
Wang X, Kalali EN, Wang D-Y (2015) An in situ polymerization approach for functionalized MoS2/nylon-6 nanocomposites with enhanced mechanical properties and thermal stability. J Mater Chem A 3(47):24112–24120
Zhu J, Peng H, Rodriguez-Macias F, Margrave JL, Khabashesku VN, Imam AM, Lozano K, Barrera EV (2004) Reinforcing epoxy polymer composites through covalent integration of functionalized nanotubes. Adv Funct Mater 14(7):643–648
Moniruzzaman M, Du F, Romero N, Winey KI (2006) Increased flexural modulus and strength in SWNT/epoxy composites by a new fabrication method. Polymer 47(1):293–298
Salavagione HJ, Martínez G (2011) Importance of covalent linkages in the preparation of effective reduced graphene oxide–poly (vinyl chloride) nanocomposites. Macromolecules 44(8):2685–2692
Yuan J-M, Fan Z-F, Chen X-H, Chen X-H, Wu Z-J, He L-P (2009) Preparation of polystyrene–multiwalled carbon nanotube composites with individual-dispersed nanotubes and strong interfacial adhesion. Polymer 50(14):3285–3291
Choi WS, Ryu SH (2010) Enhancement of dispersion of carbon nanotube and physical properties of poly (styrene-co-acrylonitrile)/multiwalled carbon nanotube nanocomposite via surface initiated ATRP. Appl Polym Sci 116(5):2930–2936
Yang B-X, Shi J-H, Pramoda K, Goh SH (2008) Enhancement of the mechanical properties of polypropylene using polypropylene-grafted multiwalled carbon nanotubes. Compos Sci Technol 68(12):2490–2497
Karthikeyan A, Coulombe S, Kietzig A (2017) Wetting behavior of multi-walled carbon nanotube nanofluids. Nanotechnology 28(10):105706
Nuriel S, Liu L, Barber A, Wagner H (2005) Direct measurement of multiwall nanotube surface tension. Chem Phys Lett 404(4):263–266
Tran MQ, Cabral JT, Shaffer MS, Bismarck A (2008) Direct measurement of the wetting behavior of individual carbon nanotubes by polymer melts: the key to carbon nanotube–polymer composites. Nano Lett 8(9):2744–2750
Dujardin E, Ebbesen TW, Krishnan A, Treacy MM (1998) Wetting of single shell carbon nanotubes. Adv Mater 10(17):1472–1475
Young T (1805) An essay on the cohesion of fluids. Philos Trans R Soc London 95:65–87
Zisman WA (1964) Relation of the equilibrium contact angle to liquid and solid constitution. Adv Chem Ser. 43:1–51
Decco O, Zuchuat J, Farkas N (2017) Improvement of Cr-Co-Mo membrane surface used as barrier for bone regeneration through UV photofunctionalization: an in vitro study. Materials 10(7):825
Yuan Y, Lee TR (2013) Contact angle and wetting properties. In: Surface science techniques. Springer, Berlin Heidelberg, 3–34
Qian H, Bismarck A, Greenhalgh ES, Shaffer MS (2010) Carbon nanotube grafted silica fibres: characterising the interface at the single fibre level. Compos Sci Technol 70(2):393–399
Caroll B (1986) Equilibrium conformation of liquid drops on thin cylinders under forces of capillarity. Langmuir 12:248–250
Neimark AV (1999) Thermodynamic equilibrium and stability of liquid films and droplets on fibers. J Adhes Sci Technol 13(10):1137–1154
Qian H, Bismarck A, Greenhalgh ES, Shaffer MS (2010) Carbon nanotube grafted carbon fibres: a study of wetting and fibre fragmentation. Composites Part A 41(9):1107–1114
Hoecker F, Karger-Kocsis J (1996) Surface energetics of carbon fibers and its effects on the mechanical performance of CF/EP composites. J Appl Polym Sci 59(1):139–153
Ghenaim A, Elachari A, Louati M, Caze C (2000) Surface energy analysis of polyester fibers modified by graft fluorination. J Appl Polym Sci 75(1):10–15
Nishijima H, Kamo S, Akita S, Nakayama Y, Hohmura KI, Yoshimura SH, Takeyasu K (1999) Carbon-nanotube tips for scanning probe microscopy: preparation by a controlled process and observation of deoxyribonucleic acid. Appl Phys Lett 74(26):4061–4063
Barber AH, Cohen SR, Wagner HD (2004) Static and dynamic wetting measurements of single carbon nanotubes. Phys Rev Lett 92(18):186103
Barber AH, Cohen SR, Wagner HD (2005) External and internal wetting of carbon nanotubes with organic liquids. Phys. Rev. B 71(11):115443
Hiura H, Ebbesen T, Tanigaki K, Takahashi H (1993) Raman studies of carbon nanotubes. Chem Phys Lett 202(6):509–512
Martínez-Rubí Y, Guan J, Lin S, Scriver C, Sturgeon RE, Simard B (2007) Rapid and controllable covalent functionalization of single-walled carbon nanotubes at room temperature. Chem Commun 48:5146–5148
Nii H, Sumiyama Y, Nakagawa H, Kunishige A (2008) Influence of diameter on the Raman spectra of multi-walled carbon nanotubes. Appl Phys Express 1(6):064005
Hulman M, Pfeiffer R, Kuzmany H (2004) Raman spectroscopy of small-diameter nanotubes. New J Phys 6(1):1
Lefrant S, Buisson J, Schreiber J, Chauvet O, Baibarac M, Baltog I (2004) Raman studies of carbon nanotubes and polymer nanotube composites. Mol Cryst Liq Cryst 415(1):125–132
Schadler L, Giannaris S, Ajayan P (1998) Load transfer in carbon nanotube epoxy composites. Appl Phys Lett 73(26):3842–3844
Rasheed A, Chae HG, Kumar S, Dadmun MD (2006) Polymer nanotube nanocomposites: correlating intermolecular interaction to ultimate properties. Polymer 47(13):4734–4741
Baibarac M, Baltog I, Lefrant S (2009) Raman spectroscopic evidence for interfacial interactions in poly (bithiophene)/single-walled carbon nanotube composites. Carbon 47(5):1389–1398
Ashino M, Schwarz A, Behnke T, Wiesendanger R (2004) Atomic-resolution dynamic force microscopy and spectroscopy of a single-walled carbon nanotube: characterization of interatomic van der Waals forces. Phys Rev Lett 93(13):136101
Bernard C, Marsaudon S, Boisgard R, Aimé J-P (2007) Competition of elastic and adhesive properties of carbon nanotubes anchored to atomic force microscopy tips. Nanotechnology 19(3):035709
Li X, Chen W, Zhan Q, Dai L, Sowards L, Pender M, Naik RR (2006) Direct measurements of interactions between polypeptides and carbon nanotubes. Phys Chem B 110(25):12621
Barber AH, Cohen SR, Wagner HD (2003) Measurement of carbon nanotube–polymer interfacial strength. Appl Phys Lett 82(23):4140–4142
Strus M, Zalamea L, Raman A, Pipes R, Nguyen C, Stach E (2008) Peeling force spectroscopy: exposing the adhesive nanomechanics of one-dimensional nanostructures. Nano Lett 8(2):544–550
Wang W, Ciselli P, Kuznetsov E, Peijs T, Barber A (2008) Effective reinforcement in carbon nanotube–polymer composites. Philos Trans R Soc London Ser A 366(1870):1613–1626
Barber AH, Cohen SR, Kenig S, Wagner HD (2004) Interfacial fracture energy measurements for multi-walled carbon nanotubes pulled from a polymer matrix. Compos Sci Technol 64(15):2283–2289
Barber A, Cohen S, Wagner H (2004) Stepped polymer morphology induced by a carbon nanotube tip. Nano Lett 4(8):1439–1443
Strus MC, Cano CI, Pipes RB, Nguyen CV, Raman A (2009) Interfacial energy between carbon nanotubes and polymers measured from nanoscale peel tests in the atomic force microscope. Compos Sci Technol 69(10):1580–1586
Poggi MA, Bottomley LA, Lillehei PT (2004) Measuring the adhesion forces between alkanethiol-modified AFM cantilevers and single walled carbon nanotubes. Nano Lett 4(1):61–64
Poggi MA, Lillehei PT, Bottomley LA (2005) Chemical force microscopy on single-walled carbon nanotube paper. Chem Mater 17(17):4289–4295
Friddle RW, Lemieux MC, Cicero G, Artyukhin AB, Tsukruk VV, Grossman JC, Galli G, Noy A (2007) Single functional group interactions with individual carbon nanotubes. Nat Nanotechnol 2(11):692–697
Rahmat M, Hubert P (2010) Interaction stress measurement using atomic force microscopy: a stepwise discretization method. J Phys Chem C 114(35):15029–15035
Rahmat M, Das K, Hubert P (2011) Interaction stresses in carbon nanotube-polymer nanocomposites. ACS Appl Mater Interfaces 3(9):3425–3431
Rahmat M, Ghiasi H, Hubert P (2012) An interaction stress analysis of nanoscale elastic asperity contacts. Nano 4(1):157–166
Tjong SC (2006) Structural and mechanical properties of polymer nanocomposites. Mater Sci Eng R 53(3):73–197
Bartczak Z, Argon A, Cohen R, Weinberg M (1999) Toughness mechanism in semi-crystalline polymer blends: II. High-density polyethylene toughened with calcium carbonate filler particles. Polymer 40(9):2347–2365
Misra R, Nerikar P, Bertrand K, Murphy D (2004) Some aspects of surface deformation and fracture of 5–20% calcium carbonate-reinforced polyethylene composites. Mater Sci Eng A 384(1):284–298
Zhu J, Wei S, Alexander MJ, Cocke D, Ho TC, Guo Z (2010) Electrical conductivity manipulation and switching phenomena of poly(p-phenylenebenzobisthiazole) thin film by doping process. J Mater Chem 20:568–574
Calvert P (1999) Nanotube composites: a recipe for strength. Nature 399(6733):210–211
Gojny F, Wichmann M, Köpke U, Fiedler B, Schulte K (2004) Carbon nanotube-reinforced epoxy-composites: enhanced stiffness and fracture toughness at low nanotube content. Compos Sci Technol 64(15):2363–2371
Sahoo NG, Rana S, Cho JW, Li L, Chan SH (2010) Polymer nanocomposites based on functionalized carbon nanotubes. Prog Polym Sci 35(7):837–867
Ou Y, Yang F, Yu ZZ (1998) A new conception on the toughness of nylon 6/silica nanocomposite prepared via in situ polymerization. J. Polym. Sci., Part B: Polym Phys 36(5):789–795
Gong T, Liu M-Q, Liu H, Peng S-P, Li T, Bao R-Y, Yang W, Xie B-H, Yang M-B, Guo Z (2017) Selective distribution and migration of carbon nanotubes enhanced electrical and mechanical performances in polyolefin elastomers. Polymer 110:1–11
Shofner ML, Khabashesku VN, Barrera EV (2006) Processing and mechanical properties of fluorinated single-wall carbon nanotube–polyethylene composites. Chem Mater 18(4):906–913
Blake R, Coleman JN, Byrne MT, McCarthy JE, Perova TS, Blau WJ, Fonseca A, Nagy JB, Gun'ko YK (2006) Reinforcement of poly (vinyl chloride) and polystyrene using chlorinated polypropylene grafted carbon nanotubes. J Mater Chem 16(43):4206–4213
Xiao K, Zhang L, Zarudi I (2007) Mechanical and rheological properties of carbon nanotube-reinforced polyethylene composites. Compos Sci Technol 67(2):177–182
Yang BX, Pramoda KP, Xu GQ, Goh SH (2007) Mechanical reinforcement of polyethylene using polyethylene-grafted multiwalled carbon nanotubes. Adv Funct Mater 17(13):2062–2069
Lee J-Y, Zhang Q, Emrick T, Crosby AJ (2006) Nanoparticle alignment and repulsion during failure of glassy polymer nanocomposites. Macromolecules 39(21):7392–7396
Hsiao C-C, Lin TS, Cheng LY, Ma C-CM, Yang AC-M (2005) The nanomechanical properties of polystyrene thin films embedded with surface-grafted multiwalled carbon nanotubes. Macromolecules 38(11):4811–4818
Stafford CM, Guo S, Harrison C, Chiang MY (2005) Combinatorial and high-throughput measurements of the modulus of thin polymer films. Rev Sci Instrum 76(6):062207
Stafford CM, Harrison C, Beers KL, Karim A, Amis EJ, VanLandingham MR, Kim H-C, Volksen W, Miller RD, Simonyi EE (2004) A buckling-based metrology for measuring the elastic moduli of polymeric thin films. Nat Mater 3(8):545–550
Stafford CM, Vogt BD, Harrison C, Julthongpiput D, Huang R (2006) Elastic moduli of ultrathin amorphous polymer films. Macromolecules 39(15):5095–5099
Dekkers M, Heikens D (1983) The effect of interfacial adhesion on the tensile behavior of polystyrene–glass–bead composites. J Appl Polym Sci 28(12):3809–3815
Fu S-Y, Lauke B (1998) Characterization of tensile behaviour of hybrid short glass fibre/calcite particle/ABS composites. Composites Part A 29(5):575–583
Zhu ZK, Yang Y, Yin J, Qi ZN (1999) Preparation and properties of organosoluble polyimide/silica hybrid materials by sol–gel process. J Appl Polym Sci 73(14):2977–2984
Zhu J, Mu L, Chen L, Shi Y, Wang H, Feng X, Lu X (2014) Interface-strengthened polyimide/carbon nanofibers nanocomposites with superior mechanical and tribological properties. Macromol Chem Phys 215(14):1407–1414
Q-l X, X-g T (2015) Atomistic modeling of mechanical characteristics of CNT-polyethylene with interfacial covalent interaction. J Nanomater 237520:1–9
Ramanathan T, Liu H, Brinson L (2005) Functionalized SWNT/polymer nanocomposites for dramatic property improvement. J. Polym Sci Part B Polym Phys. 43(17):2269–2279
Zhang J, Jia Z, Jia D, Zhang D, Zhang A (2014) Chemical functionalization for improving dispersion and interfacial bonding of halloysite nanotubes in epoxy nanocomposites. High Perform Polym 26(7):734–743
Thio Y, Argon A, Cohen R (2004) Role of interfacial adhesion strength on toughening polypropylene with rigid particles. Polymer 45(10):3139–3147
Wu CL, Zhang MQ, Rong MZ, Friedrich K (2005) Silica nanoparticles filled polypropylene: effects of particle surface treatment, matrix ductility and particle species on mechanical performance of the composites. Compos Sci Technol 65(3):635–645
Frankland S, Caglar A, Brenner D, Griebel M (2002) Molecular simulation of the influence of chemical cross-links on the shear strength of carbon nanotube–polymer interfaces. J Phys Chem B 106(12):3046–3048
Gao J, Itkis ME, Yu A, Bekyarova E, Zhao B, Haddon RC (2005) Continuous spinning of a single-walled carbon nanotube–nylon composite fiber. JACS 127(11):3847–3854
An L, Pan Y, Shen X, Lu H, Yang Y (2008) Rod-like attapulgite/polyimide nanocomposites with simultaneously improved strength, toughness, thermal stability and related mechanisms. J Mater Chem 18(41):4928–4941
Safaei M, Sheidaei A, Baniassadi M, Ahzi S, Mosavi Mashhadi M, Pourboghrat F (2015) An interfacial debonding-induced damage model for graphite nanoplatelet polymer composites. Omput. Mater Sci 96:191–199
Chen M, Lu Z (2015) A comparative study of the load transfer mechanisms of the carbon nanotube reinforced polymer composites with interfacial crystallization. Composites Part B 79:114–123
Liff SM, Kumar N, McKinley GH (2007) High-performance elastomeric nanocomposites via solvent-exchange processing. Nat Mater 6(1):76–83
Wang K, Chen L, Wu J, Toh ML, He C, Yee AF (2005) Epoxy nanocomposites with highly exfoliated clay: mechanical properties and fracture mechanisms. Macromolecules 38(3):788–800
Friedrich K, Fakirov S, Zhang Z (2005) Polymer composites: from nano-to macro-scale. Springer Science & Business Media, New York
Michler GH, Balta-Calleja FJ (2016) Mechanical properties of polymers based on nanostructure and morphology, vol 71. CRC Press, Florida
Moloney A, Kausch H, Kaiser T, Beer H (1987) Parameters determining the strength and toughness of particulate filled epoxide resins. J Mater Sci 22(2):381–393
Ash BJ, Siegel RW, Schadler LS (2004) Mechanical behavior of alumina/poly (methyl methacrylate) nanocomposites. Macromolecules 37(4):1358–1369
Johnsen B, Kinloch A, Mohammed R, Taylor A, Sprenger S (2007) Toughening mechanisms of nanoparticle-modified epoxy polymers. Polymer 48(2):530–541
Sakai M, Miyajima T, Inagaki M (1991) Fracture toughness and fiber bridging of carbon fiber reinforced carbon composites. Compos Sci Technol 40(3):231–250
Boo W, Sun L, Liu J, Clearfield A, Sue H-J, Mullins M, Pham H (2007) Morphology and mechanical behavior of exfoliated epoxy/α-zirconium phosphate nanocomposites. Compos Sci Technol 67(2):262–269
Moloney A, Kausch H, Stieger H (1984) The fracture of particulate-filled epoxide resins. J Mater Sci 19(4):1125–1130
Liu T, Tjiu WC, Tong Y, He C, Goh SS, Chung TS (2004) Morphology and fracture behavior of intercalated epoxy/clay nanocomposites. J Appl Polym Sci 94(3):1236–1244
Zuiderduin W, Huetink J, Gaymans R (2006) Rigid particle toughening of aliphatic polyketone. Polymer 47(16):5880–5887
Zuiderduin W, Westzaan C, Huetink J, Gaymans R (2003) Toughening of polypropylene with calcium carbonate particles. Polymer 44(1):261–275
Levita G, Marchetti A, Lazzeri A (1989) Fracture of ultrafine calcium carbonate/polypropylene composites. Polym Compos 10(1):39–43
Fiedler B, Gojny FH, Wichmann MH, Nolte MC, Schulte K (2006) Fundamental aspects of nano-reinforced composites. Compos Sci Technol 66(16):3115–3125
Gojny FH, Wichmann MH, Fiedler B, Schulte K (2005) Influence of different carbon nanotubes on the mechanical properties of epoxy matrix composites—a comparative study. Compos Sci Technol 65(15):2300–2313
Cao L, Liu X, Na H, Wu Y, Zheng W, Zhu J (2013) How a bio-based epoxy monomer enhanced the properties of diglycidyl ether of bisphenol A (DGEBA)/graphene composites. J Mater Chem A 1(16):5081–5088
Sahoo NG, Cheng HKF, Cai J, Li L, Chan SH, Zhao J, Yu S (2009) Improvement of mechanical and thermal properties of carbon nanotube composites through nanotube functionalization and processing methods. Mater Chem Phys 117(1):313–320
Chang C-M, Liu Y-L (2010) Functionalization of multi-walled carbon nanotubes with non-reactive polymers through an ozone-mediated process for the preparation of a wide range of high performance polymer/carbon nanotube composites. Carbon 48(4):1289–1297
Shim HC, Kwak YK, Han C-S, Kim S (2009) Enhancement of adhesion between carbon nanotubes and polymer substrates using microwave irradiation. Scr Mater 61(1):32–35
Buffa F, Abraham GA, Grady BP, Resasco D (2007) Effect of nanotube functionalization on the properties of single-walled carbon nanotube/polyurethane composites. J Polym Sci Part B Polym Phys. 45(4):490–501
Blake R, Gun'ko YK, Coleman J, Cadek M, Fonseca A, Nagy JB, Blau WJ (2004) A generic organometallic approach toward ultra-strong carbon nanotube polymer composites. JACS 126(33):10226–10227
Xie L, Xu F, Qiu F, Lu H, Yang Y (2007) Single-walled carbon nanotubes functionalized with high bonding density of polymer layers and enhanced mechanical properties of composites. Macromolecules 40(9):3296–3305
Wang F, Drzal LT, Qin Y, Huang Z (2015) Mechanical properties and thermal conductivity of graphene nanoplatelet/epoxy composites. J Mater Sci 50(3):1082–1093
Wan Y-J, Tang L-C, Gong L-X, Yan D, Li Y-B, Wu L-B, Jiang J-X, Lai G-Q (2014) Grafting of epoxy chains onto graphene oxide for epoxy composites with improved mechanical and thermal properties. Carbon 69:467–480
Ash BJ, Siegel RW, Schadler LS (2004) Glass-transition temperature behavior of alumina/PMMA nanocomposites. J Polym Sci Part B Polym Phys. 42(23):4371–4383
Alcoutlabi M, McKenna GB (2005) Effects of confinement on material behaviour at the nanometre size scale. J Phys Condens Matter 17(15):R461
Napolitano S, Glynos E, Tito NB (2017) Glass transition of polymers in bulk, confined geometries, and near interfaces. Rep Prog Phys 80(3):036602
Fragiadakis D, Pissis P, Bokobza L (2005) Glass transition and molecular dynamics in poly (dimethylsiloxane)/silica nanocomposites. Polymer 46(16):6001–6008
Bogoslovov R, Roland C, Ellis A, Randall A, Robertson C, Co A, Leal GL, Colby RH, Giacomin AJ (2008) Effect of silica nanoparticles on the local segmental dynamics in polyvinylacetate. AIP Conf Proc 1:1315–1317
Legrand A, Lecomte N, Vidal A, Haidar B, Papirer E (1992) Application of NMR spectroscopy to the characterization of elastomer/filler interactions. J Appl Polym Sci 46(12):2223–2232
Garcia-Fuentes M, Torres D, Martín-Pastor M, Alonso MJ (2004) Application of NMR spectroscopy to the characterization of PEG-stabilized lipid nanoparticles. Langmuir 20(20):8839–8845
Dybowski C, Vaughan R (1975) Motional phenomena and multiple pulse nuclear magnetic resonance. Nonisotropic motion in natural rubber. Macromolecules 8(1):50–54
Schaefer J, Chin SH, Weissman S (1972) Magic-angle carbon-13 nuclear magnetic resonance spectra of filled rubber. Macromolecules 5(6):798–801
Dutta N, Choudhury NR, Haidar B, Vidal A, Donnet J, Delmotte L, Chezeau J (1994) High resolution solid-state NMR investigation of the filler-rubber interaction: 1. High speed 1H magic-angle spinning NMR spectroscopy in carbon black filled styrene-butadiene rubber. Polymer 35(20):4293–4299
Litvinov V, Steeman P (1999) EPDM–carbon black interactions and the reinforcement mechanisms, as studied by low-resolution 1H NMR. Macromolecules 32(25):8476–8490
Kenny J, McBrierty V, Rigbi Z, Douglass D (1991) Carbon black filled natural rubber. I, structural investigations. Macromolecules 24(2):436–443
O'brien J, Cashell E, Wardell G, McBrierty V (1976) An NMR investigation of the interaction between carbon black and cis-polybutadiene. Macromolecules 9(4):653–660
Arrighi V, Higgins J, Burgess A, Floudas G (1998) Local dynamics of poly (dimethyl siloxane) in the presence of reinforcing filler particles. Polymer 39(25):6369–6376
Nakatani A, Ivkov R, Papanek P, Yang H, Gerspacher M (2000) Inelastic neutron scattering from filled elastomers. Rubber Chem Technol 73(5):847–863
Tsagaropoulos G, Eisenberg A (1995) Dynamic mechanical study of the factors affecting the two glass transition behavior of filled polymers. Similarities and differences with random ionomers. Macromolecules 28(18):6067–6077
Tsagaropoulos G, Eisenburg A (1995) Direct observation of two glass transitions in silica-filled polymers. Implications to the morphology of random ionomers. Macromolecules 28(1):396–398
Berriot J, Montes H, Lequeux F, Long D, Sotta P (2002) Evidence for the shift of the glass transition near the particles in silica-filled elastomers. Macromolecules 35(26):9756–9762
Gauthier C, Reynaud E, Vassoille R, Ladouce-Stelandre L (2004) Analysis of the non-linear viscoelastic behaviour of silica filled styrene butadiene rubber. Polymer 45(8):2761–2771
Arrighi V, McEwen I, Qian H, Prieto MS (2003) The glass transition and interfacial layer in styrene-butadiene rubber containing silica nanofiller. Polymer 44(20):6259–6266
González-Irún Rodríguez J, Carreira P, García-Diez A, Hui D, Artiaga R, Liz-Marzán L (2007) Nanofiller effect on the glass transition of a polyurethane. J Therm Anal Calorim 87(1):45–47
López-Martínez EI, Márquez-Lucero A, Hernández-Escobar CA, Flores-Gallardo SG, Ibarra-Gómez R, Yacamán MJ, Zaragoza-Contreras EA (2007) Incorporation of silver/carbon nanoparticles into poly (methyl methacrylate) via in situ miniemulsion polymerization and its influence on the glass-transition temperature. J Polym Sci Part B Polym Phys. 45(5):511–518
Bansal A, Yang H, Li C, Benicewicz BC, Kumar SK, Schadler LS (2006) Controlling the thermomechanical properties of polymer nanocomposites by tailoring the polymer–particle interface. J Polym Sci Part B Polym Phys. 44(20):2944–2950
Kraus G, Gruver J (1970) Thermal expansion, free volume, and molecular mobility in a carbon black-filled elastomer. J Polym Sci Part B Polym Phys. 8(4):571–581
Rittigstein P, Torkelson JM (2006) Polymer–nanoparticle interfacial interactions in polymer nanocomposites: Confinement effects on glass transition temperature and suppression of physical aging. J Polym Sci Part B Polym Phys. 44(20):2935–2943
Ou YC, Yu ZZ, Vidal A, Donnet J (1996) Effects of alkylation of silicas on interfacial interaction and molecular motions between silicas and rubbers. J Appl Polym Sci 59(8):1321–1328
Tian X, Zhang X, Liu W, Zheng J, Ruan C, Cui P (2006) Preparation and properties of poly (ethylene terephthalate)/silica nanocomposites. J Macromol Sci Part B Phys 45(4):507–513
Huang X, Brittain WJ (2001) Synthesis and characterization of PMMA nanocomposites by suspension and emulsion polymerization. Macromolecules 34(10):3255–3260
Mackay ME, Dao TT, Tuteja A, Ho DL, Van Horn B, Kim H-C, Hawker CJ (2003) Nanoscale effects leading to non-Einstein-like decrease in viscosity. Nat Mater 2(11):762–766
Hu L, Jiang P, Zhang P, Bian G, Sheng S, Huang M, Bao Y, Xia J (2016) Amine-graphene oxide/waterborne polyurethane nanocomposites: effects of different amine modifiers on physical properties. J Mater Sci 51(18):8296–8309
Chang JH, Mun MK, Kim JC (2007) Synthesis and characterization of poly (butylene terephthalate)/mica nanocomposite fibers via in situ interlayer polymerization. J Appl Polym Sci 106(2):1248–1255
Xu W, Zhou Z, Ge M, Pan W-P (2004) Polyvinyl chloride/montmorillonite nanocomposites. J Therm Anal Calorim 78(1):91–99
Huskić M, Žigon M (2007) PMMA/MMT nanocomposites prepared by one-step in situ intercalative solution polymerization. Eur Polym J 43(12):4891–4897
Shi X, Gan Z (2007) Preparation and characterization of poly (propylene carbonate)/montmorillonite nanocomposites by solution intercalation. Eur Polym J 43(12):4852–4858
Sun Y, Luo Y, Jia D (2008) Preparation and properties of natural rubber nanocomposites with solid-state organomodified montmorillonite. J Appl Polym Sci 107(5):2786–2792
Uthirakumar P, Nahm KS, Hahn YB, Lee Y-S (2004) Preparation of polystyrene/montmorillonite nanocomposites using a new radical initiator-montmorillonite hybrid via in situ intercalative polymerization. Eur Polym J 40(11):2437–2444
Song SH, Park KH, Kim BH, Choi YW, Jun GH, Lee DJ, Kong BS, Paik KW, Jeon S (2013) Enhanced thermal conductivity of epoxy–graphene composites by using non-oxidized graphene flakes with non-covalent functionalization. Adv Mater 25(5):732–737
Pham JQ, Mitchell CA, Bahr JL, Tour JM, Krishanamoorti R, Green PF (2003) Glass transition of polymer/single-walled carbon nanotube composite films. J Polym Sci Part B Polym Phys. 41(24):3339–3345
Bohning M, Goering H, Hao N, Mach R, Oleszak F, Schonhals A (2003) Molecular mobility and gas transport properties of polycarbonate-based nanocomposites. Rev Adv Mater Sci 5(3):155–159
Yuen S-M, Ma C-CM, Lin Y-Y, Kuan H-C (2007) Preparation, morphology and properties of acid and amine modified multiwalled carbon nanotube/polyimide composite. Compos Sci Technol 67(11):2564–2573
He L, Wang H, Xia G, Sun J, Song R (2014) Chitosan/graphene oxide nanocomposite films with enhanced interfacial interaction and their electrochemical applications. Appl Surf Sci 314:510–515
Hatui G, Bhattacharya P, Sahoo S, Dhibar S, Das CK (2014) Combined effect of expanded graphite and multiwall carbon nanotubes on the thermo mechanical, morphological as well as electrical conductivity of in situ bulk polymerized polystyrene composites. Composites Part A 56:181–191
Salavagione HJ, Gomez MA, Martínez G (2009) Polymeric modification of graphene through esterification of graphite oxide and poly (vinyl alcohol). Macromolecules 42(17):6331–6334
Bansal A, Yang H, Li C, Cho K, Benicewicz BC, Kumar SK, Schadler LS (2005) Quantitative equivalence between polymer nanocomposites and thin polymer films. Nat Mater 4(9):693–698
Pandey JK, Reddy KR, Kumar AP, Singh R (2005) An overview on the degradability of polymer nanocomposites. Polym Degrad Stab 88(2):234–250
Blumstein A (1965) Polymerization of adsorbed monolayers. II. Thermal degradation of the inserted polymer. J Polym Sci Part A Polym Chem 3(7):2665–2672
Pielichowski K, Leszczynska A (2006) Polyoxymethylene-based nanocomposites with montmorillonite: an introductory study. Polimery 51(2):143–149
Cao Y, Lai Z, Feng J, Wu P (2011) Graphene oxide sheets covalently functionalized with block copolymers via click chemistry as reinforcing fillers. J Mater Chem 21(25):9271–9278
Park S-J, Seo D-I, Lee J-R (2002) Surface modification of montmorillonite on surface acid–base characteristics of clay and thermal stability of epoxy/clay nanocomposites. J Colloid Interface Sci 251(1):160–165
Kashiwagi T, Grulke E, Hilding J, Groth K, Harris R, Butler K, Shields J, Kharchenko S, Douglas J (2004) Thermal and flammability properties of polypropylene/carbon nanotube nanocomposites. Polymer 45(12):4227–4239
Kashiwagi T, Du F, Winey KI, Groth KM, Shields JR, Bellayer SP, Kim H, Douglas JF (2005) Flammability properties of polymer nanocomposites with single-walled carbon nanotubes: effects of nanotube dispersion and concentration. Polymer 46(2):471–481
Kashiwagi T, Du F, Douglas JF, Winey KI, Harris RH, Shields JR (2005) Nanoparticle networks reduce the flammability of polymer nanocomposites. Nat Mater 4(12):928–933
Yadav SK, Cho JW (2013) Functionalized graphene nanoplatelets for enhanced mechanical and thermal properties of polyurethane nanocomposites. Appl Surf Sci 266:360–367
Zhu J, Uhl FM, Morgan AB, Wilkie CA (2001) Studies on the mechanism by which the formation of nanocomposites enhances thermal stability. Chem Mater 13(12):4649–4654
Liu N, Luo F, Wu H, Liu Y, Zhang C, Chen J (2008) One-step ionic-liquid-assisted electrochemical synthesis of ionic-liquid-functionalized graphene sheets directly from graphite. Adv Funct Mater 18(10):1518–1525
Kim H, Abdala AA, Macosko CW (2010) Graphene/polymer nanocomposites. Macromolecules 43(16):6515–6530
Pettersson S, Mahan G (1990) Theory of the thermal boundary resistance between dissimilar lattices. Phys Rev B 42(12):7386
He H, Fu R, Shen Y, Han Y, Song X (2007) Preparation and properties of Si3N4/PS composites used for electronic packaging. Compos Sci Technol 67(11):2493–2499
Norris PM, Le NQ, Baker CH (2013) Tuning phonon transport: from interfaces to nanostructures. J Heat Transfer 135(6):061604
Wang Z, Carter JA, Lagutchev A, Koh YK, Seong N-H, Cahill DG, Dlott DD (2007) Ultrafast flash thermal conductance of molecular chains. Science 317(5839):787–790
Nan C-W, Liu G, Lin Y, Li M (2004) Interface effect on thermal conductivity of carbon nanotube composites. Appl Phys Lett 85(16):3549–3551
Hall DE, Moreland JC (2001) Fundamentals of rolling resistance. Rubber Chem Technol 74(3):525–539
Cahill DG, Ford WK, Goodson KE, Mahan GD, Majumdar A, Maris HJ, Merlin R, Phillpot SR (2003) Nanoscale thermal transport. J Appl Phys 93(2):793–818
Kapitza P (1941) The study of heat transfer in helium II. Phys Rev 60(4):354
Swartz ET, Pohl RO (1989) Thermal boundary resistance. Rev Mod Phys 61(3):605
Kochetov R, Korobko A, Andritsch T, Morshuis P, Picken S, Smit J (2011) Modelling of the thermal conductivity in polymer nanocomposites and the impact of the interface between filler and matrix. J Phys D Appl Phys 44(39):395401
Costescu R, Cahill D, Fabreguette F, Sechrist Z, George S (2004) Ultra-low thermal conductivity in W/Al2O3 nanolaminates. Science 303(5660):989–990
Park JG, Cheng Q, Lu J, Bao J, Li S, Tian Y, Liang Z, Zhang C, Wang B (2012) Thermal conductivity of MWCNT/epoxy composites: the effects of length, alignment and functionalization. Carbon 50(6):2083–2090
Li J, Ma PC, Chow WS, To CK, Tang BZ, Kim JK (2007) Correlations between percolation threshold, dispersion state, and aspect ratio of carbon nanotubes. Adv Funct Mater 17(16):3207–3215
Deng F, Zheng Q-S, Wang L-F, Nan C-W (2007) Effects of anisotropy, aspect ratio, and nonstraightness of carbon nanotubes on thermal conductivity of carbon nanotube composites. Appl Phys Lett 90(2):021914
Veca LM, Meziani MJ, Wang W, Wang X, Lu F, Zhang P, Lin Y, Fee R, Connell JW, Sun YP (2009) Carbon nanosheets for polymeric nanocomposites with high thermal conductivity. Adv Mater 21(20):2088–2092
Burger N, Laachachi A, Ferriol M, Lutz M, Toniazzo V, Ruch D (2016) Review of thermal conductivity in composites: mechanisms, parameters and theory. Prog Polym Sci 61:1–28
Smith DK, Pantoya ML (2015) Effect of nanofiller shape on effective thermal conductivity of fluoropolymer composites. Compos Sci Technol 118:251–256
Chen L, Sun Y-Y, Xu H-F, He S-J, Wei G-S, Du X-Z, Lin J (2016) Analytic modeling for the anisotropic thermal conductivity of polymer composites containing aligned hexagonal boron nitride. Compos Sci Technol 122:42–49
Prasher R, Evans W, Meakin P, Fish J, Phelan P, Keblinski P (2006) Effect of aggregation on thermal conduction in colloidal nanofluids. Appl Phys Lett 89(14):143119
Tanimoto M, Yamagata T, Miyata K, Ando S (2013) Anisotropic thermal diffusivity of hexagonal boron nitride-filled polyimide films: effects of filler particle size, aggregation, orientation, and polymer chain rigidity. ACS Appl Mater Interfaces 5(10):4374–4382
Evans W, Prasher R, Fish J, Meakin P, Phelan P, Keblinski P (2008) Effect of aggregation and interfacial thermal resistance on thermal conductivity of nanocomposites and colloidal nanofluids. Int J Heat Mass Transf 51(5):1431–1438
Hsieh W-P, Lyons AS, Pop E, Keblinski P, Cahill DG (2011) Pressure tuning of the thermal conductance of weak interfaces. Phys Rev B 84(18):184107
Hopkins PE, Phinney LM, Serrano JR, Beechem TE (2010) Effects of surface roughness and oxide layer on the thermal boundary conductance at aluminum/silicon interfaces. In: 2010 14th International Heat Transfer Conference. American Society of Mechanical Engineers, 313–319
Persson B, Volokitin A, Ueba H (2011) Phononic heat transfer across an interface: thermal boundary resistance. J Phys Condens Matter 23(4):045009
Chu K, W-s L, Dong H (2013) Role of graphene waviness on the thermal conductivity of graphene. Physical review B composites. Appl Phys A Mater Sci Process 111(1):221–225
Losego MD, Grady ME, Sottos NR, Cahill DG, Braun PV (2012) Effects of chemical bonding on heat transport across interfaces. Nat Mater 11(6):502–506
Hu L, Zhang L, Hu M, Wang J-S, Li B, Keblinski P (2010) Phonon interference at self-assembled monolayer interfaces: molecular dynamics simulations. Phys Rev B 81(23):235427
Hu M, Keblinski P, Schelling PK (2009) Kapitza conductance of silicon–amorphous polyethylene interfaces by molecular dynamics simulations. Phys Rev B 79(10):104305
Hopkins PE, Baraket M, Barnat EV, Beechem TE, Kearney SP, Duda JC, Robinson JT, Walton SG (2012) Manipulating thermal conductance at metal–graphene contacts via chemical functionalization. Nano Lett 12(2):590–595
O’Brien PJ, Shenogin S, Liu J, Chow PK, Laurencin D, Mutin PH, Yamaguchi M, Keblinski P, Ramanath G (2013) Bonding-induced thermal conductance enhancement at inorganic heterointerfaces using nanomolecular monolayers. Nat Mater 12(2):118–122
Hung M-T, Choi O, Ju YS, Hahn H (2006) Heat conduction in graphite-nanoplatelet-reinforced polymer nanocomposites. Appl Phys Lett 89(2):023117
Hopkins PE, Norris PM (2007) Effects of joint vibrational states on thermal boundary conductance. Nanoscale Microscale Thermophys Eng 11(3–4):247–257
Huxtable ST, Cahill DG, Shenogin S, Xue L, Ozisik R, Barone P, Usrey M, Strano MS, Siddons G, Shim M (2003) Interfacial heat flow in carbon nanotube suspensions. Nat Mater 2(11):731–734
Zhou Y, Zhang X, Hu M (2016) An excellent candidate for largely reducing interfacial thermal resistance: a nano-confined mass graded interface. Nano 8(4):1994–2002
Wang Z, Mu H, Liang J, Tang D (2013) Thermal boundary resistance and temperature dependent phonon conduction in CNT array multilayer structure. Int J Therm Sci 74:53–62
Nakayama T (1985) New channels of energy transfer across a solid-liquid He interface. J Phys C Solid State Phys 18(22):L667
Shenogina N, Shenogin S, Xue L, Keblinski P (2005) On the lack of thermal percolation in carbon nanotube composites. Appl Phys Lett 87(13):133106
Chen RJ, Zhang Y, Wang D, Dai H (2001) Noncovalent sidewall functionalization of single-walled carbon nanotubes for protein immobilization. JACS 123(16):3838–3839
Simmons TJ, Bult J, Hashim DP, Linhardt RJ, Ajayan PM (2009) Noncovalent functionalization as an alternative to oxidative acid treatment of single wall carbon nanotubes with applications for polymer composites. ACS Nano 3(4):865–870
Teng C-C, Ma C-CM LC-H, Yang S-Y, Lee S-H, Hsiao M-C, Yen M-Y, Chiou K-C, Lee T-M (2011) Thermal conductivity and structure of non-covalent functionalized graphene/epoxy composites. Carbon 49(15):5107–5116
Yang S-Y, Lin W-N, Huang Y-L, Tien H-W, Wang J-Y, Ma C-CM, Li S-M, Wang Y-S (2011) Synergetic effects of graphene platelets and carbon nanotubes on the mechanical and thermal properties of epoxy composites. Carbon 49(3):793–803
Kong J, C-y Z, Cheng X (2013) Novel Cu–Cr alloy matrix CNT composites with enhanced thermal conductivity. Appl Phys A Mater Sci Process 112(3):631–636
Shenogin S, Xue L, Ozisik R, Keblinski P, Cahill DG (2004) Role of thermal boundary resistance on the heat flow in carbon-nanotube composites. J Appl Phys 95(12):8136–8144
Yang K, Gu M (2009) The effects of triethylenetetramine grafting of multi-walled carbon nanotubes on its dispersion, filler-matrix interfacial interaction and the thermal properties of epoxy nanocomposites. Polym Eng Sci 49(11):2158–2167
Huang X, Iizuka T, Jiang P, Ohki Y, Tanaka T (2012) Role of interface on the thermal conductivity of highly filled dielectric epoxy/AlN composites. J Phys Chem C 116(25):13629–13639
Khare KS, Khabaz F, Khare R (2014) Effect of carbon nanotube functionalization on mechanical and thermal properties of cross-linked epoxy–carbon nanotube nanocomposites: role of strengthening the interfacial interactions. ACS Appl Mater Interfaces 6(9):6098–6110
Shenogin S, Bodapati A, Xue L, Ozisik R, Keblinski P (2004) Effect of chemical functionalization on thermal transport of carbon nanotube composites. Appl Phys Lett 85(12):2229–2231
W-b Z, Xu X-l, Yang J-h, Huang T, Zhang N, Wang Y, Z-w Z (2015) High thermal conductivity of poly (vinylidene fluoride)/carbon nanotubes nanocomposites achieved by adding polyvinylpyrrolidone. Compos Sci Technol 106:1–8
Lee H-J, Han S-W, Kwon Y-D, Tan L-S, Baek J-B (2008) Functionalization of multi-walled carbon nanotubes with various 4-substituted benzoic acids in mild polyphosphoric acid/phosphorous pentoxide. Carbon 46(14):1850–1859
Zhou Y, Wang L, Zhang H, Bai Y, Niu Y, Wang H (2012) Enhanced high thermal conductivity and low permittivity of polyimide based composites by core-shell Ag@ SiO2 nanoparticle fillers. Appl Phys Lett 101(1):012903
Huang L, Zhu P, Li G, Lu DD, Sun R, Wong C (2014) Core–shell SiO 2@ RGO hybrids for epoxy composites with low percolation threshold and enhanced thermo-mechanical properties. J Mater Chem A 2(43):18246–18255
Kim KT, Dao TD, Jeong HM, Anjanapura RV, Aminabhavi TM (2015) Graphene coated with alumina and its utilization as a thermal conductivity enhancer for alumina sphere/thermoplastic polyurethane composite. Mater Chem Phys 153:291–300
Gulotty R, Castellino M, Jagdale P, Tagliaferro A, Balandin AA (2013) Effects of functionalization on thermal properties of single-wall and multi-wall carbon nanotube–polymer nanocomposites. ACS Nano 7(6):5114–5121
Kim G-H, Lee D, Shanker A, Shao L, Kwon MS, Gidley D, Kim J, Pipe KP (2015) High thermal conductivity in amorphous polymer blends by engineered interchain interactions. Nat Mater 14(3):295
Mu L, Li Y, Mehra N, Ji T, Zhu J (2017) Expedited phonon transfer in interfacially constrained polymer chain along self-organized amino acid crystals. ACS Appl Mater Interfaces 9(13):12138–12145
Mu L, Ji T, Chen L, Mehra N, Shi Y, Zhu J (2016) Paving the thermal highway with self-organized nanocrystals in transparent polymer composites. ACS Appl Mater Interfaces 8(42):29080–29087
Mu L, He J, Li Y, Ji T, Mehra N, Shi Y, Zhu J (2017) The molecular origin of efficient phonon transfer in modulated polymer blends: effect of hydrogen bonding on polymer coil size and assembled microstructure. J Phys Chem C 121(26):14204–14212
Mehra N, Mu L, Ji T, Li Y, Zhu J (2017) Moisture driven thermal conduction in polymer and polymer blends. Compos Sci Technol 151:115–123
Mehra N, Mu L, Zhu J (2017) Developing heat conduction pathways through short polymer chains in a hydrogen bonded polymer system. Compos Sci Technol 148:97–105
Yu W, Fu J, Chen L, Zong P, Yin J, Shang D, Lu Q, Chen H, Shi L (2016) Enhanced thermal conductive property of epoxy composites by low mass fraction of organic–inorganic multilayer covalently grafted carbon nanotubes. Compos Sci Technol 125:90–99
Yan H, Tang Y, Su J, Yang X (2014) Enhanced thermal–mechanical properties of polymer composites with hybrid boron nitride nanofillers. Appl Phys A Mater Sci Process 114(2):331–337
Kim G, Ryu SH, Lee J-T, Seong K-H, Lee JE, Yoon P-J, Kim B-S, Hussain M, Choa Y-H (2013) Enhancement of thermal conductive pathway of boron nitride coated polymethylsilsesquioxane composite. J Nanosci Nanotechnol 13(11):7695–7700
Wong C, Bollampally RS (1999) Comparative study of thermally conductive fillers for use in liquid encapsulants for electronic packaging. IEEE Trans Adv Packag 22(1):54–59
Qian R, Yu J, Wu C, Zhai X, Jiang P (2013) Alumina-coated graphene sheet hybrids for electrically insulating polymer composites with high thermal conductivity. RSC Adv 3(38):17373–17379
Sun R, Yao H, Zhang H-B, Li Y, Mai Y-W, Yu Z-Z (2016) Decoration of defect-free graphene nanoplatelets with alumina for thermally conductive and electrically insulating epoxy composites. Compos Sci Technol 137:16–23
Gu J, Xie C, Li H, Dang J, Geng W, Zhang Q (2014) Thermal percolation behavior of graphene nanoplatelets/polyphenylene sulfide thermal conductivity composites. Polym Compos 35(6):1087–1092
Dai W, Yu J, Liu Z, Wang Y, Song Y, Lyu J, Bai H, Nishimura K, Jiang N (2015) Enhanced thermal conductivity and retained electrical insulation for polyimide composites with SiC nanowires grown on graphene hybrid fillers. Composites Part A 76:73–81
Chen J, Chen X, Meng F, Li D, Tian X, Wang Z, Zhou Z (2017) Super-high thermal conductivity of polyamide-6/graphene-graphene oxide composites through in situ polymerization. High Perform Polym 29(5):585–594
Zong P, Fu J, Chen L, Yin J, Dong X, Yuan S, Shi L, Deng W (2016) Effect of aminopropylisobutyl polyhedral oligomeric silsesquioxane functionalized graphene on the thermal conductivity and electrical insulation properties of epoxy composites. RSC Adv 6(13):10498–10506
Ma W-S, Wu L, Yang F, Wang S-F (2014) Non-covalently modified reduced graphene oxide/polyurethane nanocomposites with good mechanical and thermal properties. J Mater Sci 49(2):562–571
Cho E-C, Huang J-H, Li C-P, Chang-Jian C-W, Lee K-C, Hsiao Y-S, Huang J-H (2016) Graphene-based thermoplastic composites and their application for LED thermal management. Carbon 102:66–73
Gojny FH, Wichmann MH, Fiedler B, Kinloch IA, Bauhofer W, Windle AH, Schulte K (2006) Evaluation and identification of electrical and thermal conduction mechanisms in carbon nanotube/epoxy composites. Polymer 47(6):2036–2045
Lee SH, Cho E, Jeon SH, Youn JR (2007) Rheological and electrical properties of polypropylene composites containing functionalized multi-walled carbon nanotubes and compatibilizers. Carbon 45(14):2810–2822
Kuilla T, Bhadra S, Yao D, Kim NH, Bose S, Lee JH (2010) Recent advances in graphene based polymer composites. Prog Polym Sci 35(11):1350–1375
Zhu J, Chen M, He Q, Shao L, Wei S, Guo Z (2013) An overview of the engineered graphene nanostructures and nanocomposites. RSC Adv 3(45):22790–22824
Zhu J, Wei S, Ryu J, Sun L, Luo Z, Guo Z (2010) Magnetic epoxy resin nanocomposites reinforced with core-shell structured Fe@FeO nanoparticles: fabrication and property analysis. ACS Appl Mater Interfaces 2(7):2100–2107
Moniruzzaman M, Winey KI (2006) Polymer nanocomposites containing carbon nanotubes. Macromolecules 39(16):5194–5205
Zhu J, Wei S, Ryu J, Budhathoki M, Liang G, Guo Z (2010) In situ stabilized carbon nanofiber (CNF) reinforced epoxy nanocomposites. J Mater Chem 20:4937–4948
Zhu J, Wei S, Yadav A, Guo Z (2010) Rheological behaviors and electrical conductivity of epoxy resin nanocomposites suspended with in-situ stabilized carbon nanofibers. Polymer 51(12):2643–2651
Zhu J, Wei S, Li Y, Sun L, Haldolaarachchige N, Young DP, Southworth C, Khasanov A, Luo Z, Guo Z (2011) Surfactant-free synthesized magnetic polypropylene nanocomposites: rheological, electrical, magnetic, and thermal properties. Macromolecules 44(11):4382–4391
Hu N, Fukunaga H, Atobe S, Liu Y, Li J (2011) Piezoresistive strain sensors made from carbon nanotubes based polymer nanocomposites. Sensors 11(11):10691–10723
Stankovich S, Dikin DA, Dommett GH, Kohlhaas KM, Zimney EJ, Stach EA, Piner RD, Nguyen ST, Ruoff RS (2006) Graphene-based composite materials. Nature 442(7100):282–286
Bryning MB, Islam MF, Kikkawa JM, Yodh AG (2005) Very low conductivity threshold in bulk isotropic single-walled carbon nanotube–epoxy composites. Adv Mater 17(9):1186–1191
Mamunya YP, Davydenko V, Pissis P, Lebedev E (2002) Electrical and thermal conductivity of polymers filled with metal powders. Eur Polym J 38(9):1887–1897
Song YS, Youn JR (2005) Influence of dispersion states of carbon nanotubes on physical properties of epoxy nanocomposites. Carbon 43(7):1378–1385
Barrau S, Demont P, Perez E, Peigney A, Laurent C, Lacabanne C (2003) Effect of palmitic acid on the electrical conductivity of carbon nanotubes–epoxy resin composites. Macromolecules 36(26):9678–9680
Sandler J, Kirk J, Kinloch I, Shaffer M, Windle A (2003) Ultra-low electrical percolation threshold in carbon-nanotube-epoxy composites. Polymer 44(19):5893–5899
Du F, Fischer JE, Winey KI (2005) Effect of nanotube alignment on percolation conductivity in carbon nanotube/polymer composites. Phys Rev B 72(12):121404
Sandler J, Kirk J, Kinloch I, Shaffer M, Windle A (2003) Ultra-low electrical percolation threshold in carbon-nanotube-epoxy composites. Polymer 44(19):5893–5899
Yu A, Ramesh P, Sun X, Bekyarova E, Itkis ME, Haddon RC (2008) Enhanced thermal conductivity in a hybrid graphite nanoplatelet–carbon nanotube filler for epoxy composites. Adv Mater 20(24):4740–4744
Sadasivuni KK, Ponnamma D, Kim J, Thomas S (2015) Graphene-based polymer nanocomposites in electronics. Springer International Publishing, New York
Stankovich S, Piner RD, Nguyen ST, Ruoff RS (2006) Synthesis and exfoliation of isocyanate-treated graphene oxide nanoplatelets. Carbon 44(15):3342–3347
Ramasubramaniam R, Chen J, Liu H (2003) Homogeneous carbon nanotube/polymer composites for electrical applications. Appl Phys Lett 83(14):2928–2930
Ma L-F, Bao R-Y, Dou R, Zheng S-D, Liu Z-Y, Zhang R-Y, Yang M-B, Yang W (2016) Conductive thermoplastic vulcanizates (TPVs) based on polypropylene (PP)/ethylene-propylene-diene rubber (EPDM) blend: from strain sensor to highly stretchable conductor. Compos Sci Technol 128:176–184
Du F-P, Tang H, Huang D-Y (2013) Thermal conductivity of epoxy resin reinforced with magnesium oxide coated multiwalled carbon nanotubes. Int J Polym Sci 541823:1–5
Karim MR, Lee CJ, Chowdhury AS, Nahar N, Lee MS (2007) Radiolytic synthesis of conducting polypyrrole/carbon nanotube composites. Mater Lett 61(8):1688–1692
Dang ZM, Wang L, Yin Y, Zhang Q, Lei QQ (2007) Giant dielectric permittivities in functionalized carbon-nanotube/electroactive-polymer nanocomposites. Adv Mater 19(6):852–857
Kwon JY, Kim HD (2005) Preparation and properties of acid-treated multiwalled carbon nanotube/waterborne polyurethane nanocomposites. J Appl Polym Sci 96(2):595–604
Kim H-S, Park BH, Yoon J-S, Jin H-J (2007) Nylon 610/functionalized multiwalled carbon nanotubes composites by in situ interfacial polymerization. Mater Lett 61(11):2251–2254
Karim MR, Lee CJ, Lee MS (2006) Synthesis and characterization of conducting polythiophene/carbon nanotubes composites. J Polym Sci Part A Polym Chem. 44(18):5283–5290
Kuila BK, Malik S, Batabyal SK, Nandi AK (2007) In-situ synthesis of soluble poly (3-hexylthiophene)/multiwalled carbon nanotube composite: morphology, structure, and conductivity. Macromolecules 40(2):278–287
Long Y, Chen Z, Zhang X, Zhang J, Liu Z (2004) Synthesis and electrical properties of carbon nanotube polyaniline composites. Ppl Phys Lett 85(10):1796–1798
Chen J, Ramasubramaniam R, Xue C, Liu H (2006) A versatile, molecular engineering approach to simultaneously enhanced, multifunctional carbon-nanotube–polymer composites. Adv Funct Mater 16(1):114–119
Kim KH, Jo WH (2009) A strategy for enhancement of mechanical and electrical properties of polycarbonate/multi-walled carbon nanotube composites. Carbon 47(4):1126–1134
Acknowledgements
Acknowledgement is made to the donors of the American Chemical Society Petroleum Research Fund (#55570-DNI10) and NSF (CBET-1603264).
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest statement
The authors declare that they have no conflict of interest.
Rights and permissions
About this article
Cite this article
Kashfipour, M.A., Mehra, N. & Zhu, J. A review on the role of interface in mechanical, thermal, and electrical properties of polymer composites. Adv Compos Hybrid Mater 1, 415–439 (2018). https://doi.org/10.1007/s42114-018-0022-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s42114-018-0022-9