Skip to main content
Log in

Adding alum through electrocoagulation with rotating anodes for treating dyes from wastewaters

  • Technical paper
  • Published:
Innovative Infrastructure Solutions Aims and scope Submit manuscript

Abstract

Dyes from textile wastewater were treated via electrocoagulation (EC) with alum addition. The effects of various operational parameters on the removal efficiency of contaminants in terms of color and chemical oxygen demand (COD) were examined. These parameters included the rotational speed of the anode, current intensity, contact time, initial concentration of dyes, and the amount of added alum (20 mg/L). Moreover, the EC of textile wastewater samples without alum added and with alum added was compared in terms of the pH value, conductivity, and amount of sludge produced. The results indicated that the optimum conditions for treating textile wastewater samples are current intensity: 0.4 A, rotational speed: 20 r.p.m, contact time: 5 min, and amount of alum (concentration: 20 mg/L) added: 5 mL. Under these conditions, the removal efficiency of dye reached 90%, the COD decreased from 240 to 41 mg/L, and the final pH of the wastewater was 7.29. These COD values indicated that the wastewater can be directly discharged into the water bodies, in accordance with Egyptian law. During the EC method, the addition of alum in very limited amounts has improved the conductivity as well as the efficiency of removing the contaminants; however, it reduced the final pH. Moreover, the addition of alum has also reduced the period of treatment to a quarter of the required time, hence saving more electrical energy. In this regard, the regression analysis was employed to develop a prediction model for the dye removal. The determination coefficient of the Excel model was (R2 = 0.908) and a determination coefficient was given by the ANN model as follows: (R2 = 0.928).

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10

Similar content being viewed by others

References

  1. Arulmathi P, Jeyaprabha C, Sivasankar P, Rajkumar V (2019) Treatment of Textile Wastewater by Coagulation-Flocculation Process Using Gossypium herbaceum and Polyaniline Coagulants. Clean: Soil, Air, Water 47:1800464

    Google Scholar 

  2. Choudhary A (2017) Performance Evaluation of Non Rotating and Rotating Anode Reactor in Electro Coagulation Process. IOP Conf Ser Mater Sci Eng 225(1):21–31

    Google Scholar 

  3. Elabbas S, Ouazzani N, Mandi L, Berrekhis F, Perdicakis M, Pontvianne S, Leclerc JP (2016) Treatment of highly concentrated tannery wastewater using electrocoagulation: influence of the quality of aluminium used for the electrode. J Hazard Mater 319:69–77

    Article  Google Scholar 

  4. Fajardo AS, Martins RC, Silva DR, Martínez-Huitle CA, Quinta-Ferreira RM (2017) Dye wastewaters treatment using batch and recirculation flow electrocoagulation systems. J Electroanal Chem 801:30–37

    Article  Google Scholar 

  5. Fajardo AS, Rodrigues RF, Martins RC, Castro LM, Quinta-Ferreira RM (2015) Phenolic wastewaters treatment by electrocoagulation process using Zn anode. Chem Eng J 275:331–341

    Article  Google Scholar 

  6. Freitas TK, Oliveira VM, De Souza TF, Geraldino HC, Almeida VC, Fávaro SL, Garcia JC (2015) Optimization of coagulation-flocculation process for treatment of industrial textile wastewater using okra (A. esculentus) mucilage as natural coagulant. Ind Crops Prod 76:538–544

    Article  Google Scholar 

  7. Gadekar MR, Ahammed MM (2020) Use of water treatment residuals for colour removal from real textile dye wastewater. Appl Water Sci 10:160

    Article  Google Scholar 

  8. Huseyin s, (2005) Decolorization and detoxification of textile wastewater ozonation and coagulation processes. Dyes Pigm 64:217–222

    Article  Google Scholar 

  9. Khorram AG, Fallah N (2018) Treatment of textile dyeing factory wastewater by electrocoagulation with low sludge settling time: Optimization of operating parameters by RSM. J Environ Chem Eng 6(1):635–642

    Article  Google Scholar 

  10. Kim TH, Park C, Shin EB, Kim S (2002) Decolorization of disperse and reactive dyes by continuous electrocoagulation process. Desalination 150(2):165–175

    Article  Google Scholar 

  11. Kobya M, Demirbas E (2015) Evaluations of operating parameters on treatment of can manufacturing wastewater by electrocoagulation. J Water Process Eng 8:64–74

    Article  Google Scholar 

  12. Kobya M, Gengec E, Demirbas E (2016) Operating parameters and costs assessments of a real dyehouse wastewater effluent treated by a continuous electrocoagulation process. Chem Eng Process 101:87–100

    Article  Google Scholar 

  13. Naje AS, Chelliapan S, Zakaria Z, Ajeel MA, Sopian K, Hasan HA (2016) Electrocoagulation by solar energy feed for textile wastewater treatment including mechanism and hydrogen production using a novel reactor design with a rotating anode. RSC Adv 6(12):10192–10204

    Article  Google Scholar 

  14. Nandi BK, Patel S (2017) Effects of operational parameters on the removal of brilliant green dye from aqueous solutions by electrocoagulation. Arab J Chem 10:S2961–S2968

    Article  Google Scholar 

  15. Palahouane B, Drouiche N, Aoudj S, Bensadok K (2015) Cost-effective electrocoagulation process for the remediation of fluoride from pretreated photovoltaic wastewater. J Ind Eng Chem 22:127–131

    Article  Google Scholar 

  16. Paz A, Carballo J, Pérez MJ, Domínguez JM (2017) Biological treatment of model dyes and textile wastewaters. Chemosphere 181:168–217

    Article  Google Scholar 

  17. Radwan M, Gar Alalm M, Eletriby H (2018) Optimization and modeling of electro-Fenton process for treatment of phenolic wastewater using nickel and sacrificial stainless steel anodes. J Water Process Eng 22(2018):155–162. https://doi.org/10.1016/j.jwpe.2018.02.003

    Article  Google Scholar 

  18. Saxena S, Raja AS (2014) Natural dyes: sources, chemistry, application and sustainability issues. Roadmap to sustainable textiles and clothing. Springer, Singapore, pp 37–80

    Chapter  Google Scholar 

  19. Song Z, Williams CJ, Edyvean RGJ (2003) Treatment of tannery wastewater by chemical coagulation. J Desalin 164:249–259

    Article  Google Scholar 

  20. Tak BY, Tak BS, Kim YJ, Park YJ, Yoon YH, Min GH (2015) Optimization of color and COD removal from livestock wastewater by electrocoagulation process: application of Box-Behnken design (BBD). J Ind Eng Chem 28:307–315

    Article  Google Scholar 

  21. Yang T, Qiao B, Li GC, Yang QY (2015) Improving performance of dynamic membrane assisted by electrocoagulation for treatment of oily wastewater: effect of electrolytic conditions. Desalination 363:134–143

    Article  Google Scholar 

  22. Yuksel E, Gurbulak E, Eyvaz M (2011) Decolorization of a reactive dye solution and treatment of a textile wastewater by electrocoagulation and chemical coagulation: techno-economic comparison. Environ Progress Sustain Energy 31(4):524–535

    Article  Google Scholar 

Download references

Acknowledgements

The authors have already used a small portion of the literature for this manuscript to publish a manuscript at the 25th International Conference on Engineering, Computational and Experimental Sciences. The authors would like to thank El Nasr Co. For Spinning, Weaving & Pigment (Mahalla) because it allowed us to take samples of textile wastewater.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Karim Taha.

Ethics declarations

Conflict of interest

The authors declare that there is no conflict of interest.

Electronic supplementary material

Below is the link to the electronic supplementary material.

Supplementary file1 (DOCX 292 kb)

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Taha, K., Elsheikh, M.A., Saleh, H. et al. Adding alum through electrocoagulation with rotating anodes for treating dyes from wastewaters. Innov. Infrastruct. Solut. 6, 17 (2021). https://doi.org/10.1007/s41062-020-00376-x

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1007/s41062-020-00376-x

Keywords

Navigation