Skip to main content
Log in

Experimental Investigation of the Effects of FRP Bar Fiber Type and Surface Characteristics on the Performance of Reinforced Concrete Beams

  • Research Paper
  • Published:
Iranian Journal of Science and Technology, Transactions of Civil Engineering Aims and scope Submit manuscript

Abstract

In this study, experimental investigations were conducted on rectangular cross-section beams to determine the effects of FRP (fiber-reinforced polymer) bars with different fiber and surface characteristics on the flexural performance of reinforced concrete beams. Taking the steel-reinforced beam as a reference, FRP bars were used in the same ratio and spacing in the FRP-reinforced beams. The beams were reinforced with steel rebar and aramid, basalt, glass, carbon FRP bars with sand-coated and ribbed surface characteristics. The effects of FRP bars and bar surfaces on the flexural strengths of the beams and their failure modes were examined through four-point flexural tests. According to the results obtained from the experimental study, the flexural strength of the FRP-reinforced beams nearly has matched that of the steel-reinforced beams. It has been observed that some FRP-reinforced beams with different fiber types and bar surface characteristics showed higher strengths than steel-reinforced beams. While all of the steel-reinforced beams failed only by flexure, the failure modes of the FRP-reinforced beams varied. The fiber type and bar surface characteristics have also influenced the failure modes of the beams.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 17
Fig. 18

Similar content being viewed by others

References

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Şeymanur Arslan.

Rights and permissions

Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Aydın, F., Aydın, E., Saribiyik, A. et al. Experimental Investigation of the Effects of FRP Bar Fiber Type and Surface Characteristics on the Performance of Reinforced Concrete Beams. Iran J Sci Technol Trans Civ Eng (2023). https://doi.org/10.1007/s40996-023-01301-9

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1007/s40996-023-01301-9

Keywords

Navigation