Abstract
Fiber-reinforced polymers (FRPs) are being widely used in the structural engineering because of their superior performance over conventional materials such as higher tensile strength, high corrosion resistance, electromagnetic resistance, good durability and light weight. The literature is deficient in the nonlinear finite element analysis (NLFEA) and theoretical predictions of FRP-confined concrete columns. The aim of the present work is to explore the structural performance of steel-tube FRP confined concrete (STC) columns under axial concentric loading. A NLFEA model of STC columns was simulated using ABAQUS which was then, calibrated for different material and geometric models of concrete, steel tube and FRP material using the experimental results from literature. The predictions of proposed NLFEA model were in close agreement with the previous experimental measurements. An extensive parametric study was performed to examine the effects of various parameters of STC columns. Furthermore, a large database of axial strength of 543 confined concrete compression members was developed from the previous researches to propose an empirical model that predicts the ultimate axial strength of STC columns accurately.
Similar content being viewed by others
References
Alfarah B, López-Almansa F, Oller S (2017) New methodology for calculating damage variables evolution in plastic damage model for RC structures. J Eng Struct 132:70–86. https://doi.org/10.1016/j.engstruct.2016.11.022
An LH, Fehling E (2016) Finite element analysis of circular steel tube confined UHPC stub columns. In: Proceedings of 1st international conference on UHPC materials and structures (UHPC 2016-China), Changsha, China, October 27–30, 2016, published by RILEM (105)
An LH, Fehling E (2017a) Analysis of circular steel tube confined UHPC stub columns. Steel Compos Struct Int J Technol 23(6):669–682
An LH, Fehling E (2017b) Numerical study of circular steel tube confined concrete (STCC) stub columns with various concrete strengths. J Constr Steel Res 136:238–255. https://doi.org/10.1016/j.jcsr.2017.05.020
An LH, Fehling E, Ismail M (2016) Numerical modelling of circular concrete filled steel tube stub columns. In: Proceedings of HiperMat 2016 4th international symposium on ultra-high-performance concrete and high-performance construction materials, Kassel, March 9–11
An LH, Ekkehard F, Binglin L, Duc-Kien T, An-Chau NV (2019) Experimental study on structural performance of UHPC and UHPFRC columns confined with steel tube. Eng Struct 187:457–477. https://doi.org/10.1016/j.engstruct.2019.02.063
Anderson TL (1995) Fracture mechanics: fundamentals and applications. CRC Press, New York
ASCE (1982) Task committee on finite element analysis of reinforced concrete structures. State-of-the-art report on finite element analysis of reinforced concrete, American Society of Civil Engineers
Ashraf M, Gardner L, Nethercot DA (2006) Finite element modelling of structural stainless-steel cross-sections. Thin Walled Struct 44(10):1048–1062. https://doi.org/10.1016/j.tws.2006.10.010
Barbero E, Cosso F, Roman R, Weadon T (2013) Determination of material parameters for Abaqus progressive damage analysis of E-glass epoxy laminates. Compos B Eng 46:211–220. https://doi.org/10.1016/j.compositesb.2012.09.069
British Standards Institution (2004) Design of concrete structures—part 1-1: general rules and rules for buildings. Eurocode 2
Buchanan C, Gardner L, Liew A (2016) The continuous strength method for the design of circular hollow sections. J Constr Steel Res 118:207–216. https://doi.org/10.1016/j.jcsr.2015.11.006
Chang X, Ru ZL, Zhou W, Zhang YB (2013) Study on concrete-filled stainless steel–carbon steel tubular (CFSCT) stub columns under compression. Thin Walled Struct 63:125–133. https://doi.org/10.1016/j.tws.2012.10.002
Chau V, An N, Le H, Thai D-K (2019) Numerical simulation and analytical assessment of STCC columns filled with UHPC and UHPFRC. Struct Eng Mech 70(1):013–31
Diaz Valdes S, Soutis C (2000) Health monitoring of composites using Lamb waves generated by piezoelectric devices. Plast Rubber Compos 29(9):496–502. https://doi.org/10.1179/146580100101541328
Dı́az Valdés SH, Soutis C (2002) Real-time nondestructive evaluation of fiber composite laminates using low-frequency Lamb waves. J Acoust Soc Am 111(5):2026–2033. https://doi.org/10.1121/1.1466870
Ding FX, Liu J, Liu XM, Yu ZW, Li DW (2015) Mechanical behavior of circular and square concrete filled steel tube stub columns under local compression. Thin Walled Struct 94:155–166. https://doi.org/10.1016/j.tws.2015.04.020
Ellobody E (2013) A consistent nonlinear approach for analysing steel, cold-formed steel, stainless steel and composite columns at ambient and fire conditions. Thin Walled Struct 68:1–17. https://doi.org/10.1016/j.tws.2013.02.016
Ellobody E, Young B, Lam D (2006) Behaviour of normal and high strength concrete-filled compact steel tube circular stub columns. J Constr Steel Res 62(7):706–715. https://doi.org/10.1016/j.jcsr.2005.11.002
Fam A, Qie FS, Rizkalla S (2004) Concrete-filled steel tubes subjected to axial compression and lateral cyclic loads. J Struct Eng 130(4):631–640. https://doi.org/10.1061/(asce)0733-9445(2004)130:4(631)
Gardner L, Cruise RB, Sok CP, Krishnan K, Dos Santos JM (1900) Life-cycle costing of metallic structures. ICE, New York
Genikomsou AS, Maria Anna P (2015) Finite element analysis of punching shear of concrete slabs using damaged plasticity model in ABAQUS. Eng Struct 98:38–48. https://doi.org/10.1016/j.engstruct.2015.04.016
Hadi MN, Khan QS, Sheikh MN (2016) Axial and flexural behavior of unreinforced and FRP bar reinforced circular concrete filled FRP tube columns. Constr Build Mater 122:43–53. https://doi.org/10.1016/j.conbuildmat.2016.06.044
Han LH, Li W, Bjorhovde R (2014) Developments and advanced applications of concrete-filled steel tubular (CFST) structures: Members. J Constr Steel Res 100:211–228. https://doi.org/10.1016/j.jcsr.2014.04.016
Hany NF, Hantouche EG, Harajli MH (2016) Finite element modeling of FRP-confined concrete using modified concrete damaged plasticity. Eng Struct 125:1–14. https://doi.org/10.1016/j.engstruct.2016.06.047
Hashin Z (1980) Failure criteria for unidirectional fiber composites. J Appl Mech 47(2):329–334. https://doi.org/10.1115/1.3157744
Hashin Z, Rotem A (1973) A fatigue failure criterion for fiber reinforced materials. J Compos Mater 7(4):448–464. https://doi.org/10.1177/002199837300700404
Hassanein M (2010) Numerical modelling of concrete-filled lean duplex slender stainless-steel tubular stub columns. J Constr Steel Res 66(8–9):1057–1068. https://doi.org/10.1016/j.jcsr.2010.03.008
Hassanein M, Kharoob O, Liang Q (2013) Behaviour of circular concrete-filled lean duplex stainless steel–carbon steel tubular short columns. Eng Struct 56:83–94. https://doi.org/10.1016/j.engstruct.2013.04.016
Hoang AL, Fehlinga E (2017) Numerical analysis of circular steel tube confined UHPC stub columns. Comput Concr 19(3):263–273. https://doi.org/10.12989/cac.2017.19.3.263
Hoang AL, Fehling E, Thai DK, Nguyen CV (2019) Evaluation of axial strength in circular STCC columns using UHPC and UHPFRC. J Constr Steel Res 153:533–549
Hu HT, Huang CS, Wu MH, Wu YM (2003) Nonlinear analysis of axially loaded concrete-filled tube columns with confinement effect. J Struct Eng 129(10):1322–1329. https://doi.org/10.1061/(asce)0733-9445(2003)129:10(1322)
Hu B, Wang JG, Li GQ (2011) Numerical simulation and strength models of FRP-wrapped reinforced concrete columns under eccentric loading. Constr Build Mater 25(5):2751–2763. https://doi.org/10.1016/j.conbuildmat.2010.12.036
Huang L, Zhang S, Yu T, Wang Z (2018) Compressive behaviour of large rupture strain FRP-confined concrete-encased steel columns. Constr Build Mater 183:513–522. https://doi.org/10.1016/j.conbuildmat.2018.06.074
Jiang T, Teng J (2007) Analysis-oriented stress–strain models for FRP—confined concrete. Eng Struct 29(11):2968–2986. https://doi.org/10.1016/j.engstruct.2007.01.010
Kachlakev DI, Miller TH, Potisuk T, Yim SC, Chansawat K (2001) Finite element modeling of reinforced concrete structures strengthened with FRP laminates, Oregon. Department of Transportation. Research Group, New York
Karabinis A, Rousakis T (2002) Concrete confined by FRP material: a plasticity approach. Eng Struct 24(7):923–932. https://doi.org/10.1016/s0141-0296(02)00011-1
Lam D, Gardner L (2008) Structural design of stainless-steel concrete filled columns. J Constr Steel Res 64(11):1275–1282. https://doi.org/10.1016/j.jcsr.2008.04.012
Lam L, Teng J (2003) Design-oriented stress–strain model for FRP-confined concrete. Constr Build Mater 17(6–7):471–489
Le AH, Ekkehard F, Thai DK, Nguyen CV (2018) Simplified stress–strain model for circular steel tube confined UHPC and UHPFRC columns. Steel Compos Struct 29(1):125–138
Lee J, Fenves GL (1998) A plastic-damage concrete model for earthquake analysis of dams. Earthq Eng Struct Dyn 27(9):937–956. https://doi.org/10.1002/eqe.2317
Liew JR, Xiong D (2009) Effect of preload on the axial capacity of concrete-filled composite columns. J Constr Steel Res 65(3):709–722. https://doi.org/10.1016/j.jcsr.2008.03.023
Lim JC, Karakus M, Ozbakkaloglu T (2016) Evaluation of ultimate conditions of FRP-confined concrete columns using genetic programming. Comput Struct 162:28–37. https://doi.org/10.1016/j.compstruc.2015.09.005
Liu J, Zhou X (2010) Behavior and strength of tubed RC stub columns under axial compression. J Constr Steel Res 66(1):28–36. https://doi.org/10.1016/j.jcsr.2009.08.006
Liu JP, Xu TX, Wang YH, Guo Y (2018) Axial behaviour of circular steel tubed concrete stub columns confined by CFRP materials. Constr Build Mater 168:221–231. https://doi.org/10.1016/j.conbuildmat.2018.02.131
Majewski S (2003) The mechanics of structural concrete in terms of elasto-plasticity. Publishing House of Silesian University of Technology, Gliwice
Mander JB, Priestley MJ, Park R (1988) Theoretical stress–strain model for confined concrete. J Struct Eng 114(8):1804–1826
Matthews FL, Davies G, Hitchings D, Soutis C (2000) Finite element modelling of composite materials and structures. Elsevier, Berlin
Matthys S, Toutanji H, Audenaert K, Taerwe L (2005) Axial load behavior of large-scale columns confined with fiber-reinforced polymer composites. ACI Struct J 102(2):258. https://doi.org/10.14359/14277
Mazzucco G, Salomoni VA, Majorana CE, Pellegrino C, Ceccato C (2016) Numerical investigation of concrete columns with external FRP jackets subjected to axial loads. Constr Build Mater 111:590–599. https://doi.org/10.1016/j.conbuildmat.2016.02.050
Miyauchi K (1997) Estimation of strengthening effects with carbon fiber sheet for concrete column. In: Proceedings of the 3rd international symposium on non-metallic (FRP) reinforcement for concrete structures. Japan Concrete Institute
Najafgholipour MA, Dehghan SM, Dooshabi A, Niroomandi A (2017) Finite element analysis of reinforced concrete beam–column connections with governing joint shear failure mode. Latin Am J Solids Struct 14(7):1200–1225. https://doi.org/10.1590/1679-78253682
Nayal R, Rasheed HA (2006) Tension stiffening model for concrete beams reinforced with steel and FRP bars. J Mater Civ Eng 18(6):831–841. https://doi.org/10.1061/(asce)0899-1561(2006)18:6(831)
O'Shea MD, Bridge RQ (2000) Design of circular thin-walled concrete filled steel tubes. J Struct Eng 126(11):1295–1303
Patel VI, Hassanein MF, Thai HT, Al Abadi H, Paton-Cole V (2017) Behaviour of axially loaded circular concrete-filled bimetallic stainless-carbon steel tubular short columns. Eng Struct 147:583–597. https://doi.org/10.1016/j.engstruct.2017.05.064
Patel VI, Liang QQ, Hadi MN (2014) Nonlinear analysis of axially loaded circular concrete-filled stainless steel tubular short columns. J Constr Steel Res 101:9–18. https://doi.org/10.1016/j.jcsr.2014.04.036
Perea T, Leon RT, Hajjar JF, Denavit MD (2014) Full-scale tests of slender concrete-filled tubes: Interaction behavior. J Struct Eng 140(9):04014054. https://doi.org/10.1061/(asce)st.1943-541x.0000949
Piscesa B, Attard MM, Samani AK (2017) Three-dimensional finite element analysis of circular reinforced concrete column confined with FRP using plasticity model. J Proc Eng 171:847–856. https://doi.org/10.1016/j.proeng.2017.01.377
Rasmussen KJ, Burns T, Bezkorovainy P, Bambach MR (2003) Numerical modelling of stainless steel plates in compression. J Constr Steel Res 59(11):1345–1362. https://doi.org/10.1016/s0143-974x(03)00086-5
Raza A, Khan QUZ (2020) Experimental and numerical behavior of hybrid fiber reinforced concrete compression members under concentric loading. SN Appl Sci. https://doi.org/10.1007/s42452-020-2461-5
Raza A, Khan QUZ, Ahmad A (2019) Numerical investigation of load-carrying capacity of GFRP-reinforced rectangular concrete members using CDP model in ABAQUS. Adv Civ Eng 2019:21. https://doi.org/10.1155/2019/1745341
Raza A, Shah SAR, Khan AR, Aslam MA, Khan TA, Arshad K, Hussan S, Sultan A, Shahzadi G, Waseem M (2020) Sustainable FRP-confined symmetric concrete structures: an application experimental and numerical validation process for reference data. Appl Sci 10(1):333. https://doi.org/10.3390/app10010333
Richart FE, Brandtzaeg A, Brown RL (1928) A study of the failure of concrete under combined compressive stresses. University of Illinois at Urbana Champaign, College of Engineering, New York
Rousakis TC, Karabinis AI, Kiousis PD, Tepfers R (2008) Analytical modelling of plastic behaviour of uniformly FRP confined concrete members. Compos B Eng 39(7–8):1104–1113. https://doi.org/10.1016/j.compositesb.2008.05.001
Saafi M, Toutanji HA, Li Z (1999) Behavior of concrete columns confined with fiber reinforced polymer tubes. ACI Mater J 96(4):500–509. https://doi.org/10.14359/652
Sadeghian P, Fam A (2015) Improved design-oriented confinement models for FRP-wrapped concrete cylinders based on statistical analyses. Eng Struct 87:162–182. https://doi.org/10.1016/j.engstruct.2015.01.024
Sharif AM, Al-Mekhlafi GM, Al-Osta MA (2019) Structural performance of CFRP-strengthened concrete-filled stainless-steel tubular short columns. Eng Struct 183:94–109. https://doi.org/10.1016/j.engstruct.2019.01.011
Shi Y, Swait T, Soutis C (2012) Modelling damage evolution in composite laminates subjected to low velocity impact. J Compos Struct 94(9):2902–2913. https://doi.org/10.1016/j.compstruct.2012.03.039
Tam VW, Wang ZB, Tao Z (2014) Behaviour of recycled aggregate concrete filled stainless steel stub columns. Mater Struct 47(1–2):293–310. https://doi.org/10.1617/s11527-013-0061-1
Tao Z, Uy B, Liao FY, Han LH (2011) Nonlinear analysis of concrete-filled square stainless-steel stub columns under axial compression. J Constr Steel Res 67(11):1719–1732
Tao Z, Wang ZB, Yu Q (2013) Finite element modelling of concrete-filled steel stub columns under axial compression. J Constr Steel Res 89:121–131. https://doi.org/10.1016/j.jcsr.2013.07.001
Teng J, Jiang T, Lam L, Luo Y (2009) Refinement of a design-oriented stress–strain model for FRP-confined concrete. J Compos Constr 13(4):269–278. https://doi.org/10.1061/(asce)cc.1943-5614.0000012
Teng J, Xiao Q, Yu T, Lam L (2015) Three-dimensional finite element analysis of reinforced concrete columns with FRP and/or steel confinement. Eng Struct 97:15–28. https://doi.org/10.1016/j.engstruct.2015.03.030
Theofanous M, Chan TM, Gardner L (2009) Structural response of stainless steel oval hollow section compression members. Eng Struct 31(4):922–934. https://doi.org/10.1016/j.engstruct.2008.12.002
Toutanji HA (1999) Stress–strain characteristics of concrete columns externally confined with advanced fiber composite sheets. ACI Mater J 96(3):397–404. https://doi.org/10.14359/639
Van Den Einde L, Zhao L, Seible F (2003) Use of FRP composites in civil structural applications. J Constr Build Mater 17(6–7):389–403
Voyiadjis GZ, Taqieddin ZN (2009) Elastic plastic and damage model for concrete materials: part I—theoretical formulation. Int J Struct Changes Solids 1(1):31–59
Wahalathantri BL, Thambiratnam DP, Chan THT, Fawzia S (2011) A material model for flexural crack simulation in reinforced concrete elements using ABAQUS. In: Proceedings of the first international conference on engineering, designing and developing the built environment for sustainable wellbeing. Queensland University of Technology
Wang YB, Liew JR (2016) Constitutive model for confined ultra-high strength concrete in steel tube. Constr Build Mater 126:812–822. https://doi.org/10.1016/j.conbuildmat.2016.09.079
Wu JY, Li J, Faria R (2006) An energy release rate-based plastic-damage model for concrete. Int J Solids Struct 43(3–4):583–612. https://doi.org/10.1016/j.ijsolstr.2005.05.038
Xiao Y (2004) Applications of FRP composites in concrete columns. Adv Struct Eng 7(4):335–343. https://doi.org/10.1260/1369433041653552
Xiong MX, Xiong DX, Liew JR (2017) Axial performance of short concrete filled steel tubes with high-and ultra-high-strength materials. Eng Struct 136:494–510. https://doi.org/10.1016/j.engstruct.2017.01.037
Youssf O, ElGawady MA, Mills JE, Ma X (2014) Finite element modelling and dilation of FRP-confined concrete columns. Eng Struct 79:70–85. https://doi.org/10.1016/j.engstruct.2014.07.045
Yu T, Teng J, Wong Y, Dong S (2010a) Finite element modeling of confined concrete-I: Drucker-Prager type plasticity model. Eng Struct 32(3):665–679. https://doi.org/10.1016/j.engstruct.2009.11.014
Yu T, Teng JG, Wong YL, Dong SL (2010b) Finite element modeling of confined concrete-II: plastic-damage model. Eng Struct 32(3):680–691. https://doi.org/10.1016/j.engstruct.2009.11.013
Zhao O, Afshan S, Gardner L (2017) Structural response and continuous strength method design of slender stainless-steel cross-sections. Eng Struct 140:14–25. https://doi.org/10.1016/j.engstruct.2017.02.044
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare no conflict of interest.
Rights and permissions
About this article
Cite this article
Raza, A., Ali, B. & Rehman, A. Structural Performance of Steel-Tube Concrete Columns Confined with CFRPs: Numerical and Theoretical Study. Iran J Sci Technol Trans Civ Eng 45, 1575–1592 (2021). https://doi.org/10.1007/s40996-020-00492-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40996-020-00492-9