Abstract
Perovskite materials, especially metal halide perovskites, exhibit excellent properties, such as large optical coefficients, high carrier mobilities, long carrier lifetimes, tunable resistivities, large X-ray attenuation coefficients, and simple processing techniques. In recent decades, perovskites have attracted significant attention in the photoelectric field due to their versatile utility in solar cells, light-emitting diodes, photodetectors, X/γ-ray detectors, and lasing. However, the wide applicability of perovskites highly depends on the quality of perovskite crystals and films. Thus far, several perovskite growth technologies and methods have emerged. Therefore, this review classified and summarized the main methods that have been employed to achieve perovskite growth in recent years, including the solution temperature-lowering (STL) method, inverse temperature crystallization (ITC), anti-solvent vapor-assisted crystallization (AVC), spin coating, and chemical vapor deposition (CVD). Through analysis and summary, it has been determined that the STL, ITC, and AVC methods are mainly used to grow high-quality perovskite single crystals. While the spin-coating method has a significant advantage in the preparation of perovskite films, the CVD method is propitious in the fabrication of a variety of morphologies of micro/nano perovskite materials. We hope that this review can be a comprehensive reference for scientific researchers to prepare perovskite-related materials.
摘要
钙钛矿材料尤其是金属卤化物钙钛矿具有优异的性能, 如较大的光系数、较高的载流子迁移率、较长的载流子寿命、可调谐的电阻率、较大的X射线衰减系数和简单的处理工艺等. 这些优点使得钙钛矿材料在光电领域, 如太阳能电池、发光二极管、光电探测器、X/γ;射线探测器和激光等研究领域引起了广泛关注. 钙钛矿材料的广泛应用依赖于高质量的钙钛矿晶体或薄膜. 截至目前, 已经涌现出众多的钙钛矿生长技术和方法. 本综述分类总结了近年来用于钙钛矿材料生长的主要方法和手段, 包括溶液降温法、逆温结晶法、反溶剂法、旋涂法和化学气相沉积法等. 通过总结与分析, 发现溶液降温法、逆温结晶法、反溶剂法主要用于生长高质量的钙钛矿单晶, 旋涂法在制备钙钛矿薄膜方面具有较大优势, 而化学气相沉积法则在制备多种形貌的微纳钙钛矿材料方面占据优势. 本综述可为科研人员在钙钛矿材料生长方面提供可参考的依据和具体参数.
Article PDF
Similar content being viewed by others
References
Liu Y, Yang Z, Liu SF. Recent progress in single-crystalline perovskite research including crystal preparation, property evaluation, and applications. Adv Sci, 2018, 5: 1700471
Møller CK. Crystal structure and photoconductivity of cæsium plumbohalides. Nature, 1958, 182: 1436
Haque MA, Sheikh AD, Guan X, et al. Metal oxides as efficient charge transporters in perovskite solar cells. Adv Energy Mater, 2017, 7: 1602803
Liu Z, Mi Y, Guan X, et al. Morphology-tailored halide perovskite platelets and wires: from synthesis, properties to optoelectronic devices. Adv Opt Mater, 2018, 6: 1800413
Weber D. CH3NH3PbX3, ein Pb(II)-system mit kubischer perowskitstruktur/CH3NH3PbX3, a Pb(II)-system with cubic perovskite structure. Z für Naturforschung B, 1978, 33: 1443–1445
Weber D. CH3NH3SnBrxI3−x (x=0−3), ein Sn(II)-system mit kubischer perowskitstruktur/CH3NH3SnBrxI3−x (x=0−3), a Sn(II)-system with cubic perovskite structure. Z für Naturforschung B, 1978, 33: 862–865
Kojima A, Teshima K, Shirai Y, et al. Organometal halide perovskites as visible-light sensitizers for photovoltaic cells. J Am Chem Soc, 2009, 131: 6050–6051
Dong R, Fang Y, Chae J, et al. High-gain and low-driving-voltage photodetectors based on organolead triiodide perovskites. Adv Mater, 2015, 27: 1912–1918
Zhang X, Sun C, Zhang Y, et al. Bright perovskite nanocrystal films for efficient light-emitting devices. J Phys Chem Lett, 2016, 7: 4602–4610
Stranks SD, Eperon GE, Grancini G, et al. Electron-hole diffusion lengths exceeding 1 micrometer in an organometal trihalide perovskite absorber. Science, 2013, 342: 341–344
Wehrenfennig C, Eperon GE, Johnston MB, et al. High charge carrier mobilities and lifetimes in organolead trihalide perovskites. Adv Mater, 2014, 26: 1584–1589
Jeon NJ, Noh JH, Yang WS, et al. Compositional engineering of perovskite materials for high-performance solar cells. Nature, 2015, 517: 476–480
Park NG. Perovskite solar cells: an emerging photovoltaic technology. Mater Today, 2015, 18: 65–72
Liu Y, Yang Z, Cui D, et al. Two-inch-sized perovskite CH3NH3PbX3 (X=Cl, Br, I) crystals: growth and characterization. Adv Mater, 2015, 27: 5176–5183
Liu D, Wang Q, Traverse CJ, et al. Impact of ultrathin C60 on perovskite photovoltaic devices. ACS Nano, 2018, 12: 876–883
Sutherland BR, Sargent EH. Perovskite photonic sources. Nat Photon, 2016, 10: 295–302
Zhang Y, Liu Y, Li Y, et al. Perovskite CH3NH3Pb(BrxI1−x)3 single crystals with controlled composition for fine-tuned bandgap towards optimized optoelectronic applications. J Mater Chem C, 2016, 4: 9172–9178
Murali B, Saidaminov MI, Abdelhady AL, et al. Robust and air-stable sandwiched organo-lead halide perovskites for photodetector applications. J Mater Chem C, 2016, 4: 2545–2552
Li Y, Shi Z, Lei L, et al. Highly stable perovskite photodetector based on vapor-processed micrometer-scale CsPbBr3 microplatelets. Chem Mater, 2018, 30: 6744–6755
Tiep NH, Ku Z, Fan HJ. Recent advances in improving the stability of perovskite solar cells. Adv Energy Mater, 2016, 6: 1501420
Liang J, Wang C, Wang Y, et al. All-inorganic perovskite solar cells. J Am Chem Soc, 2016, 138: 15829–15832
Chen Q, Zhou H, Fang Y, et al. The optoelectronic role of chlorine in CH3NH3PbI3(Cl)-based perovskite solar cells. Nat Commun, 2015, 6: 7269
Jiang Q, Zhang L, Wang H, et al. Enhanced electron extraction using SnO2 for high-efficiency planar-structure HC(NH2)2PbI3-based perovskite solar cells. Nat Energy, 2017, 2: 16177
Gao F, Zhao Y, Zhang X, et al. Recent progresses on defect passivation toward efficient perovskite solar cells. Adv Energy Mater, 2020, 10: 1902650
Wang P, Zhang X, Zhou Y, et al. Solvent-controlled growth of inorganic perovskite films in dry environment for efficient and stable solar cells. Nat Commun, 2018, 9: 2225
Zhou H, Chen Q, Li G, et al. Interface engineering of highly efficient perovskite solar cells. Science, 2014, 345: 542–546
You J, Hong Z, Yang YM, et al. Low-temperature solution-processed perovskite solar cells with high efficiency and flexibility. ACS Nano, 2014, 8: 1674–1680
Guo Y, Yin X, Liu J, et al. Highly efficient CsPbIBr2 perovskite solar cells with efficiency over 9.8% fabricated using a preheating-assisted spin-coating method. J Mater Chem A, 2019, 7: 19008–19016
Li M, Wei Q, Muduli SK, et al. Enhanced exciton and photon confinement in ruddlesden-popper perovskite microplatelets for highly stable low-threshold polarized lasing. Adv Mater, 2018, 30: 1707235
Zhou H, Yuan S, Wang X, et al. Vapor growth and tunable lasing of band gap engineered cesium lead halide perovskite micro/nanorods with triangular cross section. ACS Nano, 2016, 11: 1189–1195
Zhang Q, Ha ST, Liu X, et al. Room-temperature near-infrared high-q perovskite whispering-gallery planar nanolasers. Nano Lett, 2014, 14: 5995–6001
Zhang Q, Su R, Liu X, et al. High-quality whispering-gallery-mode lasing from cesium lead halide perovskite nanoplatelets. Adv Funct Mater, 2016, 26: 6238–6245
Chen J, Du W, Shi J, et al. Perovskite quantum dot lasers. InfoMat, 2020, 2: 170–183
Ling Y, Tian Y, Wang X, et al. Enhanced optical and electrical properties of polymer-assisted all-inorganic perovskites for light-emitting diodes. Adv Mater, 2016, 28: 8983–8989
Yantara N, Bhaumik S, Yan F, et al. Inorganic halide perovskites for efficient light-emitting diodes. J Phys Chem Lett, 2015, 6: 4360–4364
Li G, Rivarola FWR, Davis NJLK, et al. Highly efficient perovskite nanocrystal light-emitting diodes enabled by a universal cross-linking method. Adv Mater, 2016, 28: 3528–3534
Jin X, Zhang X, Fang H, et al. Facile assembly of high-quality organic-inorganic hybrid perovskite quantum dot thin films for bright light-emitting diodes. Adv Funct Mater, 2018, 28: 1705189
Wei Q, Li M, Zhang Z, et al. Efficient recycling of trapped energies for dual-emission in mn-doped perovskite nanocrystals. Nano Energy, 2018, 51: 704–710
Cao Y, Wang N, Tian H, et al. Perovskite light-emitting diodes based on spontaneously formed submicrometre-scale structures. Nature, 2018, 562: 249–253
Wang J, Wang N, Jin Y, et al. Interfacial control toward efficient and low-voltage perovskite light-emitting diodes. Adv Mater, 2015, 27: 2311–2316
Wang N, Cheng L, Ge R, et al. Perovskite light-emitting diodes based on solution-processed self-organized multiple quantum wells. Nat Photon, 2016, 10: 699–704
Lai ML, Tay TYS, Sadhanala A, et al. Tunable near-infrared luminescence in tin halide perovskite devices. J Phys Chem Lett, 2016, 7: 2653–2658
Swarnkar A, Chulliyil R, Ravi VK, et al. Colloidal CsPbBr3 perovskite nanocrystals: luminescence beyond traditional quantum dots. Angew Chem Int Ed, 2015, 54: 15424–15428
Pan W, Wu H, Luo J, et al. Cs2AgBiBr6 single-crystal X-ray detectors with a low detection limit. Nat Photon, 2017, 11: 726–732
Saidaminov MI, Haque MA, Savoie M, et al. Perovskite photodetectors operating in both narrowband and broadband regimes. Adv Mater, 2016, 28: 8144–8149
Sun Z, Aigouy L, Chen Z. Plasmonic-enhanced perovskite-graphene hybrid photodetectors. Nanoscale, 2016, 8: 7377–7383
Lu J, Sheng X, Tong G, et al. Ultrafast solar-blind ultraviolet detection by inorganic perovskite CsPbX3 quantum dots radial junction architecture. Adv Mater, 2017, 29: 1700400
Tong G, Geng X, Yu Y, et al. Rapid, stable and self-powered perovskite detectors via a fast chemical vapor deposition process. RSC Adv, 2017, 7: 18224–18230
Li Y, Shi Z, Lei L, et al. Controllable vapor-phase growth of inorganic perovskite microwire networks for high-efficiency and temperature-stable photodetectors. ACS Photonics, 2018, 5: 2524–2532
Ding J, Fang H, Lian Z, et al. A self-powered photodetector based on a CH3NH3PbI3 single crystal with asymmetric electrodes. CrystEngComm, 2016, 18: 4405–4411
Gao L, Zeng K, Guo J, et al. Passivated single-crystalline CH3NH3PbI3 nanowire photodetector with high detectivity and polarization sensitivity. Nano Lett, 2016, 16: 7446–7454
Deng H, Dong D, Qiao K, et al. Growth, patterning and alignment of organolead iodide perovskite nanowires for optoelectronic devices. Nanoscale, 2015, 7: 4163–4170
Li J, Yuan S, Tang G, et al. High-performance, self-powered photodetectors based on perovskite and graphene. ACS Appl Mater Interfaces, 2017, 9: 42779–42787
Liu Y, Zhang Y, Yang Z, et al. Thinness- and shape-controlled growth for ultrathin single-crystalline perovskite wafers for mass production of superior photoelectronic devices. Adv Mater, 2016, 28: 9204–9209
Liu Y, Sun J, Yang Z, et al. 20-mm-large single-crystalline formamidinium-perovskite wafer for mass production of integrated photodetectors. Adv Opt Mater, 2016, 4: 1829–1837
Deng H, Yang X, Dong D, et al. Flexible and semitransparent organolead triiodide perovskite network photodetector arrays with high stability. Nano Lett, 2015, 15: 7963–7969
Chen Q, Wu J, Ou X, et al. All-inorganic perovskite nanocrystal scintillators. Nature, 2018, 561: 88–93
Luo Q, Ma H, Zhang Y, et al. Cross-stacked superaligned carbon nanotube electrodes for efficient hole conductor-free perovskite solar cells. J Mater Chem A, 2016, 4: 5569–5577
Liu T, Wang C, Hou J, et al. Enhanced electron collection in perovskite solar cells employing thermoelectric NaCo2O4/TiO2 coaxial nanofibers. Small, 2016, 12: 5146–5152
Luo Q, Zhang Y, Liu C, et al. Iodide-reduced graphene oxide with dopant-free spiro-ometad for ambient stable and high-efficiency perovskite solar cells. J Mater Chem A, 2015, 3: 15996–16004
Chen Q, Zhou H, Hong Z, et al. Planar heterojunction perovskite solar cells via vapor-assisted solution process. J Am Chem Soc, 2013, 136: 622–625
Liu M, Johnston MB, Snaith HJ. Efficient planar heterojunction perovskite solar cells by vapour deposition. Nature, 2013, 501: 395–398
Burschka J, Pellet N, Moon SJ, et al. Sequential deposition as a route to high-performance perovskite-sensitized solar cells. Nature, 2013, 499: 316–319
Dang Y, Liu Y, Sun Y, et al. Bulk crystal growth of hybrid perovskite material CH3NH3PbI3. CrystEngComm, 2015, 17: 665–670
Lian Z, Yan Q, Gao T, et al. Perovskite CH3NH3PbI3(Cl) single crystals: rapid solution growth, unparalleled crystalline quality, and low trap density toward 108 cm−3. J Am Chem Soc, 2016, 138: 9409–9412
Ling Y, Tan L, Wang X, et al. Composite perovskites of cesium lead bromide for optimized photoluminescence. J Phys Chem Lett, 2017, 8: 3266–3271
Rakita Y, Kedem N, Gupta S, et al. Low-temperature solution-grown CsPbBr3 single crystals and their characterization. Cryst Growth Des, 2016, 16: 5717–5725
Saidaminov MI, Haque MA, Almutlaq J, et al. Inorganic lead halide perovskite single crystals: phase-selective low-temperature growth, carrier transport properties, and self-powered photodetection. Adv Opt Mater, 2017, 5: 1600704
Cho H, Jeong SH, Park MH, et al. Overcoming the electroluminescence efficiency limitations of perovskite light-emitting diodes. Science, 2015, 350: 1222–1225
Li C, Han C, Zhang Y, et al. Enhanced photoresponse of self-powered perovskite photodetector based on ZnO nanoparticles decorated CsPbBr3 films. Sol Energy Mater Sol Cells, 2017, 172: 341–346
Liu X, Tan X, Liu Z, et al. Boosting the efficiency of carbon-based planar CsPbBr3 perovskite solar cells by a modified multistep spin-coating technique and interface engineering. Nano Energy, 2019, 56: 184–195
Wang Q, Zheng X, Deng Y, et al. Stabilizing the α-phase of CsPbI3 perovskite by sulfobetaine zwitterions in one-step spin-coating films. Joule, 2017, 1: 371–382
Zhang Q, Zhu W, Chen D, et al. Light processing enables efficient carbon-based, all-inorganic planar CsPbIBr2 solar cells with high photovoltages. ACS Appl Mater Interfaces, 2019, 11: 2997–3005
Du W, Zhang S, Shi J, et al. Strong exciton-photon coupling and lasing behavior in all-inorganic CsPbBr3 micro/nanowire Fabry-Pérot cavity. ACS Photonics, 2018, 5: 2051–2059
Gao Y, Zhao L, Shang Q, et al. Ultrathin CsPbX3 nanowire arrays with strong emission anisotropy. Adv Mater, 2018, 30: 1801805
Liu Z, Li Y, Guan X, et al. One-step vapor-phase synthesis and quantum-confined exciton in single-crystal platelets of hybrid halide perovskites. J Phys Chem Lett, 2019, 10: 2363–2371
Niu L, Zeng Q, Shi J, et al. Controlled growth and reliable thickness-dependent properties of organic-inorganic perovskite platelet crystal. Adv Funct Mater, 2016, 26: 5263–5270
Ng A, Ren Z, Shen Q, et al. Crystal engineering for low defect density and high efficiency hybrid chemical vapor deposition grown perovskite solar cells. ACS Appl Mater Interfaces, 2016, 8: 32805–32814
Ding J, Yan Q. Progress in organic-inorganic hybrid halide perovskite single crystal: growth techniques and applications. Sci China Mater, 2017, 60: 1063–1078
Wang Y, Chang S, Chen X, et al. Rapid growth of halide perovskite single crystals: from methods to optimization control. Chin J Chem, 2019, 37: 616–629
Fu Y, Rea MT, Chen J, et al. Selective stabilization and photophysical properties of metastable perovskite polymorphs of CsPbI3 in thin films. Chem Mater, 2017, 29: 8385–8394
Zeng J, Zhou H, Liu R, et al. Combination of solution-phase process and halide exchange for all-inorganic, highly stable CsPbBr3 perovskite nanowire photodetector. Sci China Mater, 2019, 62: 65–73
Chen J, Fu Y, Samad L, et al. Vapor-phase epitaxial growth of aligned nanowire networks of cesium lead halide perovskites (CsPbX3, X=Cl, Br, I). Nano Lett, 2016, 17: 460–466
Chen J, Morrow DJ, Fu Y, et al. Single-crystal thin films of cesium lead bromide perovskite epitaxially grown on metal oxide perovskite (SrTiO3). J Am Chem Soc, 2017, 139: 13525–13532
Mi Y, Liu Z, Shang Q, et al. Fabry-Pérot oscillation and room temperature lasing in perovskite cube-corner pyramid cavities. Small, 2018, 14: 1703136
Zhang Y, Liu Y, Yang Z, et al. High-quality perovskite MAPbI3 single crystals for broad-spectrum and rapid response integrate photodetector. J Energy Chem, 2018, 27: 722–727
Liu X, Liu Y, Gao F, et al. Photoinduced surface voltage mapping study for large perovskite single crystals. Appl Phys Lett, 2016, 108: 181604
Dang Y, Ju D, Wang L, et al. Recent progress in the synthesis of hybrid halide perovskite single crystals. CrystEngComm, 2016, 18: 4476–4484
Li S, Zhang C, Song JJ, et al. Metal halide perovskite single crystals: from growth process to application. Crystals, 2018, 8: 220
Babu R, Giribabu L, Singh SP. Recent advances in halide-based perovskite crystals and their optoelectronic applications. Cryst Growth Des, 2018, 18: 2645–2664
Saidaminov MI, Abdelhady AL, Murali B, et al. High-quality bulk hybrid perovskite single crystals within minutes by inverse temperature crystallization. Nat Commun, 2015, 6: 7586
Eperon GE, Burlakov VM, Docampo P, et al. Morphological control for high performance, solution-processed planar heterojunction perovskite solar cells. Adv Funct Mater, 2014, 24: 151–157
Im JH, Jang IH, Pellet N, et al. Growth of CH3NH3PbI3 cuboids with controlled size for high-efficiency perovskite solar cells. Nat Nanotech, 2014, 9: 927–932
Tavakoli MM, Gu L, Gao Y, et al. Fabrication of efficient planar perovskite solar cells using a one-step chemical vapor deposition method. Sci Rep, 2015, 5: 14083
Wang B, Chen T. Exceptionally stable CH3NH3PbI3 films in moderate humid environmental condition. Adv Sci, 2016, 3: 1500262
Peng Y, Jing G, Cui T. A hybrid physical-chemical deposition process at ultra-low temperatures for high-performance perovskite solar cells. J Mater Chem A, 2015, 3: 12436–12442
Luo P, Liu Z, Xia W, et al. Chlorine-conducted defect repairment and seed crystal-mediated vapor growth process for controllable preparation of efficient and stable perovskite solar cells. J Mater Chem A, 2015, 3: 22949–22959
Luo P, Liu Z, Xia W, et al. A simple in situ tubular chemical vapor deposition processing of large-scale efficient perovskite solar cells and the research on their novel roll-over phenomenon in J-V curves. J Mater Chem A, 2015, 3: 12443–12451
Leyden MR, Ono LK, Raga SR, et al. High performance perovskite solar cells by hybrid chemical vapor deposition. J Mater Chem A, 2014, 2: 18742–18745
Leyden MR, Lee MV, Raga SR, et al. Large formamidinium lead trihalide perovskite solar cells using chemical vapor deposition with high reproducibility and tunable chlorine concentrations. J Mater Chem A, 2015, 3: 16097–16103
Luo P, Liu Z, Xia W, et al. Uniform, stable, and efficient planar-heterojunction perovskite solar cells by facile low-pressure chemical vapor deposition under fully open-air conditions. ACS Appl Mater Interfaces, 2015, 7: 2708–2714
Leyden MR, Jiang Y, Qi Y. Chemical vapor deposition grown formamidinium perovskite solar modules with high steady state power and thermal stability. J Mater Chem A, 2016, 4: 13125–13132
Dong Q, Fang Y, Shao Y, et al. Electron-hole diffusion lengths >175 µm in solution-grown CH3NH3PbI3 single crystals. Science, 2015, 347: 967–970
Zhang H, Liu X, Dong J, et al. Centimeter-sized inorganic lead halide perovskite CsPbBr3 crystals grown by an improved solution method. Cryst Growth Des, 2017, 17: 6426–6431
Saidaminov MI, Abdelhady AL, Maculan G, et al. Retrograde solubility of formamidinium and methylammonium lead halide perovskites enabling rapid single crystal growth. Chem Commun, 2015, 51: 17658–17661
Shi D, Adinolfi V, Comin R, et al. Low trap-state density and long carrier diffusion in organolead trihalide perovskite single crystals. Science, 2015, 347: 519–522
Mitzi DB, Feild CA, Schlesinger Z, et al. Transport, optical, and magnetic properties of the conducting halide perovskite CH3NH3SnI3. J Solid State Chem, 1995, 114: 159–163
Lian Z, Yan Q, Lv Q, et al. High-performance planar-type photodetector on (100) facet of MAPbI3 single crystal. Sci Rep, 2015, 5: 16563
Chae J, Dong Q, Huang J, et al. Chloride incorporation process in CH3NH3PbI3−xClx perovskites via nanoscale bandgap maps. Nano Lett, 2015, 15: 8114–8121
Su J, Chen DP, Lin CT. Growth of large CH3NH3PbX3 (X=I, Br) single crystals in solution. J Cryst Growth, 2015, 422: 75–79
Xu Z, Li H, Zhao H, et al. Optimizing optoelectronic performances by controlling halide compositions of MAPb(ClxI1−x)3 single crystals. CrystEngComm, 2019, 21: 4169–4174
Dang Y, Zhong C, Zhang G, et al. Crystallographic investigations into properties of acentric hybrid perovskite single crystals NH(CH3)3SnX3 (X=Cl, Br). Chem Mater, 2016, 28: 6968–6974
Han Q, Bae SH, Sun P, et al. Single crystal formamidinium lead iodide (FAPbI3): insight into the structural, optical, and electrical properties. Adv Mater, 2016, 28: 2253–2258
Huang Y, Li L, Liu Z, et al. The intrinsic properties of FA(1−x)MAxPbI3 perovskite single crystals. J Mater Chem A, 2017, 5: 8537–8544
Dang Y, Zhou Y, Liu X, et al. Formation of hybrid perovskite tin iodide single crystals by top-seeded solution growth. Angew Chem Int Ed, 2016, 55: 3447–3450
Dirin DN, Cherniukh I, Yakunin S, et al. Solution-grown CsPbBr3 perovskite single crystals for photon detection. Chem Mater, 2016, 28: 8470–8474
Liu Y, Ren X, Zhang J, et al. 120 mm single-crystalline perovskite and wafers: towards viable applications. Sci China Chem, 2017, 60: 1367–1376
Yang Y, Yan Y, Yang M, et al. Low surface recombination velocity in solution-grown CH3NH3PbBr3 perovskite single crystal. Nat Commun, 2015, 6: 7961
Fang HH, Adjokatse S, Wei H, et al. Ultrahigh sensitivity of methylammonium lead tribromide perovskite single crystals to environmental gases. Sci Adv, 2016, 2: e1600534
Liao Q, Hu K, Zhang H, et al. Perovskite microdisk microlasers self-assembled from solution. Adv Mater, 2015, 27: 3405–3410
Chen F, Xu C, Xu Q, et al. Structure evolution of CH3NH3PbBr3 single crystal grown in N,N-dimethylformamide solution. Cryst Growth Des, 2018, 18: 3132–3137
Zhou H, Nie Z, Yin J, et al. Antisolvent diffusion-induced growth, equilibrium behaviours in aqueous solution and optical properties of CH3NH3PbI3 single crystals for photovoltaic applications. RSC Adv, 2015, 5: 85344–85349
Grancini G, D’Innocenzo V, Dohner ER, et al. CH3NH3PbI3 perovskite single crystals: surface photophysics and their interaction with the environment. Chem Sci, 2015, 6: 7305–7310
Wehrenfennig C, Liu M, Snaith HJ, et al. Charge-carrier dynamics in vapour-deposited films of the organolead halide perovskite CH3NH3PbI3−xClx. Energy Environ Sci, 2014, 7: 2269–2275
Tidhar Y, Edri E, Weissman H, et al. Crystallization of methyl ammonium lead halide perovskites: implications for photovoltaic applications. J Am Chem Soc, 2014, 136: 13249–13256
Saidaminov MI, Adinolfi V, Comin R, et al. Planar-integrated single-crystalline perovskite photodetectors. Nat Commun, 2015, 6: 8724
Ding J, Du S, Zuo Z, et al. High detectivity and rapid response in perovskite CsPbBr3 single-crystal photodetector. J Phys Chem C, 2017, 121: 4917–4923
Dursun I, De Bastiani M, Turedi B, et al. CsPb2Br5 single crystals: synthesis and characterization. ChemSusChem, 2017, 10: 3746–3749
Peng W, Wang L, Murali B, et al. Solution-grown monocrystalline hybrid perovskite films for hole-transporter-free solar cells. Adv Mater, 2016, 28: 3383–3390
Yang Z, Xu Q, Wang X, et al. Large and ultrastable all-inorganic CsPbBr3 monocrystalline films: low-temperature growth and application for high-performance photodetectors. Adv Mater, 2018, 30: 1802110
Yang Z, Lu J, ZhuGe M, et al. Controllable growth of aligned monocrystalline CsPbBr3 microwire arrays for piezoelectric-induced dynamic modulation of single-mode lasing. Adv Mater, 2019, 31: 1900647
Pascoe AR, Gu Q, Rothmann MU, et al. Directing nucleation and growth kinetics in solution-processed hybrid perovskite thin-films. Sci China Mater, 2017, 60: 617–628
Zhou Y, Game OS, Pang S, et al. Microstructures of organometal trihalide perovskites for solar cells: their evolution from solutions and characterization. J Phys Chem Lett, 2015, 6: 4827–4839
LaMer VK, Dinegar RH. Theory, production and mechanism of formation of monodispersed hydrosols. J Am Chem Soc, 1950, 72: 4847–4854
Cao G, Wang Y. Nanostructures and Nanomaterials: Synthesis, Properties and Applications. 2nd Edition. London: Imperial College Press, 2004
Huang F, Li M, Siffalovic P, et al. From scalable solution fabrication of perovskite films towards commercialization of solar cells. Energy Environ Sci, 2019, 12: 518–549
Lu J, Chen SC, Zheng Q. Defect passivation of CsPbIBr2 perovskites for high-performance solar cells with large open-circuit voltage of 1.28 V. ACS Appl Energy Mater, 2018, 1: 5872–5878
Liang J, Zhao P, Wang C, et al. CsPb0.9Sn0.1IBr2 based all-inorganic perovskite solar cells with exceptional efficiency and stability. J Am Chem Soc, 2017, 139: 14009–14012
Gao LL, Liang LS, Song XX, et al. Preparation of flexible perovskite solar cells by a gas pump drying method on a plastic substrate. J Mater Chem A, 2016, 4: 3704–3710
Li X, Bi D, Yi C, et al. A vacuum flash-assisted solution process for high-efficiency large-area perovskite solar cells. Science, 2016, 353: 58–62
Xu Y, Zhu L, Shi J, et al. Efficient hybrid mesoscopic solar cells with morphology-controlled CH3NH3PbI3−xClx derived from two-step spin coating method. ACS Appl Mater Interfaces, 2015, 7: 2242–2248
Yang WS, Park BW, Jung EH, et al. Iodide management in formamidinium-lead-halide-based perovskite layers for efficient solar cells. Science, 2017, 356: 1376–1379
Kim YH, Cho H, Heo JH, et al. Multicolored organic/inorganic hybrid perovskite light-emitting diodes. Adv Mater, 2015, 27: 1248–1254
Tan ZK, Moghaddam RS, Lai ML, et al. Bright light-emitting diodes based on organometal halide perovskite. Nat Nanotech, 2014, 9: 687–692
Longo G, Pertegás A, Martínez-Sarti L, et al. Highly luminescent perovskite-aluminum oxide composites. J Mater Chem C, 2015, 3: 11286–11289
Chen B, Bai Y, Yu Z, et al. Efficient semitransparent perovskite solar cells for 23.0%-efficiency perovskite/silicon four-terminal tandem cells. Adv Energy Mater, 2016, 6: 1601128
Wang N, Cheng L, Si J, et al. Morphology control of perovskite light-emitting diodes by using amino acid self-assembled monolayers. Appl Phys Lett, 2016, 108: 141102
Zhang X, Wang W, Xu B, et al. Thin film perovskite light-emitting diode based on CsPbBr3 powders and interfacial engineering. Nano Energy, 2017, 37: 40–45
Zhu W, Zhang Q, Chen D, et al. Intermolecular exchange boosts efficiency of air-stable, carbon-based all-inorganic planar CsPbIBr2 perovskite solar cells to over 9%. Adv Energy Mater, 2018, 8: 1802080
Rao H, Ye S, Gu F, et al. Morphology controlling of all-inorganic perovskite at low temperature for efficient rigid and flexible solar cells. Adv Energy Mater, 2018, 8: 1800758
Jeon NJ, Noh JH, Kim YC, et al. Solvent engineering for high-performance inorganic-organic hybrid perovskite solar cells. Nat Mater, 2014, 13: 897–903
Lou YH, Li M, Wang ZK. Seed-mediated superior organometal halide films by GeO2 nano-particles for high performance perovskite solar cells. Appl Phys Lett, 2016, 108: 053301
Xiao Z, Bi C, Shao Y, et al. Efficient, high yield perovskite photovoltaic devices grown by interdiffusion of solution-processed precursor stacking layers. Energy Environ Sci, 2014, 7: 2619–2623
Hwang K, Jung YS, Heo YJ, et al. Toward large scale roll-to-roll production of fully printed perovskite solar cells. Adv Mater, 2015, 27: 1241–1247
Mitzi DB, Prikas MT, Chondroudis K. Thin film deposition of organic-inorganic hybrid materials using a single source thermal ablation technique. Chem Mater, 1999, 11: 542–544
Huo C, Liu X, Song X, et al. Field-effect transistors based on vander-Waals-grown and dry-transferred all-inorganic perovskite ultrathin platelets. J Phys Chem Lett, 2017, 8: 4785–4792
Du W, Zhang S, Wu Z, et al. Unveiling lasing mechanism in CsPbBr3 microsphere cavities. Nanoscale, 2019, 11: 3145–3153
Wang Y, Sun X, Chen Z, et al. High-temperature ionic epitaxy of halide perovskite thin film and the hidden carrier dynamics. Adv Mater, 2017, 29: 1702643
Leyden MR, Meng L, Jiang Y, et al. Methylammonium lead bromide perovskite light-emitting diodes by chemical vapor deposition. J Phys Chem Lett, 2017, 8: 3193–3198
Sanders S, Stümmler D, Pfeiffer P, et al. Chemical vapor deposition of organic-inorganic bismuth-based perovskite films for solar cell application. Sci Rep, 2019, 9: 9774
Li G, Che T, Ji X, et al. Record-low-threshold lasers based on atomically smooth triangular nanoplatelet perovskite. Adv Funct Mater, 2019, 29: 1805553
Wu Z, Chen J, Mi Y, et al. All-inorganic CsPbBr3 nanowire based plasmonic lasers. Adv Opt Mater, 2018, 6: 1800674
Liu X, Niu L, Wu C, et al. Periodic organic-inorganic halide perovskite microplatelet arrays on silicon substrates for room-temperature lasing. Adv Sci, 2016, 3: 1600137
Xing J, Liu XF, Zhang Q, et al. Vapor phase synthesis of organometal halide perovskite nanowires for tunable room-temperature nanolasers. Nano Lett, 2015, 15: 4571–4577
Acknowledgements
This work was supported by the Ministry of Science and Technology (2016YFA0200700 and 2017YFA0205004), the National Natural Science Foundation of China (21673054, 11874130, 61307120, 61704038 and 11474187) and the Open Research Fund Program of the State Key Laboratory of Low-Dimensional Quantum Physics (KF201902).
Author information
Authors and Affiliations
Contributions
Wang S mainly drafted the manuscript, while Yang F, Cao Q, Zhong Y, Wang A, and Du W assisted Wang S to complete the literature research, draw up the tables, and discuss the ideas of the article. Liu X led the project.
Corresponding author
Additional information
Conflict of interest
The authors declare that they have no conflict of interests.
Shaoli Wang received her MSc degree from Beijing University of Technology in 2011, and PhD degree from the Institute of Chemistry, Chinese Academy of Sciences in 2014. Then she joined the Experiment Center of Forestry in North China, Chinese Academy of Forestry and engaged in material-related scientific research. At the end of August 2019, she joined the research group of Xinfeng Liu at the National Center for Nanoscience and Technology (NCNST) to study the new nano materials.
Xinfeng Liu is a professor at the NCNST, China. He received his PhD in 2011 at NCNST. Then he joined the School of Physical and Mathematical Sciences of Nanyang Technological University, Singapore, as a postdoctoral fellow. He joined the “100-Talents” Program of the Chinese Academy of Sciences in 2015 and became a professor of NCNST since then. His research group mainly focuses on light-matter interaction and ultrafast spectroscopy at micro-to-nanometer scale.
Rights and permissions
About this article
Cite this article
Wang, S., Yang, F., Zhu, J. et al. Growth of metal halide perovskite materials. Sci. China Mater. 63, 1438–1463 (2020). https://doi.org/10.1007/s40843-020-1300-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40843-020-1300-2