Abstract
An automatic crack tracking scheme is developed for measuring the tensile opening (mode I) interlaminar fracture toughness (GIc) of continuous glass fiber-reinforced composite materials. The technique is directly compared to ASTM standard D5528, which contains a manual procedure to obtain G Ic values from crack length data using a double cantilever beam (DCB) specimen. In this study, a custom computer program with edge detection software rapidly, automatically, and accurately tracks the crack front in translucent DCB specimens by optically monitoring dissimilarities between delaminated and intact portions of the sample. The program combines mechanical testing, image processing, and data collection subroutines into a single interface. The technique is compatible with sample geometries and fabrication processes described in ASTM D5528, and it requires only the addition of a charge-coupled device (CCD) and light source. Compared with the manual techniques outlined in the ASTM standard, the introduced method provides enhanced resolution and reduced workload to determine crack length and resulting G Ic of continuous glass fiber-reinforced composite DCB samples.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
De Moura, M.F.S.F., Campilho, R.D.S.G., Amaro, A.M., and Reis, P.N.B., “Interlaminar and Intralaminar Fracture Characterization of Composites Under Mode I Loading,” Composite Structures 92(1):144–149 (2010).
Kim, J., and Sham, M., “Impact and Delamination Failure of Woven-Fabric Composites,” Composites Science and Technology 60:745–761 (2000).
Senthil, K., Arockiarajan, A., Palaninathan, R., Santhosh, B., and Usha, K., “Defects in Composite Structures: Its Effects and Prediction Methods - a Comprehensive Review,” Composite Structures 106:139–149 (2013).
Hashemi, S., Kinloch, A., and William, J., “Corrections Needed in Double-Cantilever Beam Tests for Assessing the Interlaminar Failure of Fibre-Composites,” Journal of Materials Science Letters 2:125–129 (1989).
Davidson, B.D., “An Analytical Investigation of Delamination Front Curvature in Double Cantilever Beam Specimens,” Journal of Composite Materials 24(11):1124–1137 (1990).
ASTM International. ASTM D5528: Standard Test Methods for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites (2007).
Thesken, J.C., “A Delamination Gage for Carbon Fiber Composites,” Experimental Mechanics 36(4):388–398 (1996).
Yarlagadda, S., Abuobaid, A., Yoon, M. K., Hager, N., and Domszy, R. “An Automated Technique for Measuring Crack Propagation during Mode I DCB Testing,” 2004 SEM X International Congress & Exposition on Experimental & Applied Mechanics (2004), URL http://www.sem.org/proceedings/ConferencePapers-Paper.cfm?ConfPapersPaperID=24880 [accessed 9 September 2011].
Yoon, H.J., Song, K.Y., Kim, J.S., Shin, K.B., and Kim, S.C., “Crack Propagation Monitoring of DCB Composite Specimens Using Distributed Optical Fiber Sensor,” Materials Science Forum 654–656:2592–2595 (2010).
Jarimopas, B., and Jaisin, N., “An Experimental Machine Vision System for Sorting Sweet Tamarind,” Journal of Food Engineering 89(3):291–297 (2008).
Sun, T.-H., Tseng, C.-C., and Chen, M.-S., “Electric Contacts Inspection Using Machine Vision,” Image and Vision Computing 28(6):890–901 (2010).
Kim, B.Y., Member, S., Haas, C.T., and Member, R.G., “Path Planning For Machine Vision Assisted, Teleoperated Pavement Crack Sealer,” Journal of Transportation Engineering 124:137–143 (1998).
Gao, H.L., Shen, S.S., and Yun, Y., “Fatigue Crack Length Real Time Measurement Method Based on Camera Automatically Tracking and Positioning,” Applied Mechanics and Materials 130–134:3111–3118 (2011).
Song, K.Y., Petrou, M., and Kittler, J., “Texture Crack Detection,” Machine Vision and Applications 8(1):63–75 (1995).
Pappada, S., Rametta, R., Largo, A., and Maffezzoli, A., “Low-Velocity Impact Response in Composite Plates Embedding Shape Memory Alloy Wires,” Polymer Composites 33(5):655–664 (2012).
Robinson, P., and Song, D.Q., “A Modified DCB Specimen for Mode I Testing of Multidirectional Laminates,” Journal of Composite Materials 26(11):1554–1577 (1992).
De Morais, A., de Moura, M., Gonc¸alves, J.P., and Camanho, P., “Analysis of crack propagation in double cantilever beam tests of multidirectional laminates,” Mechanics of Materials 35(7):641–652 (2003).
Sebaey, T.A., Blanco, N., Lopes, C.S., and Costa, J., “Numerical Investigation to Prevent Crack Jumping in Double Cantilever Beam Tests of Multidirectional Composite Laminates,” Composites Science and Technology 71(13):1587–1592 (2011).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Krull, B., Patrick, J., Hart, K. et al. Automatic Optical Crack Tracking for Double Cantilever Beam Specimens. Exp Tech 40, 937–945 (2016). https://doi.org/10.1007/s40799-016-0094-9
Published:
Issue Date:
DOI: https://doi.org/10.1007/s40799-016-0094-9