Abstract
By using SOL–GEL Technique, novel nanocomposites made of alumina/hydroxyapatite/graphene were deposited on Ti-6Al-4V Substrates. The wear performances of the deposited coatings and coating thickness were assessed by scanning electron microscopy and EDS. The crystallography and the topography of the coated surface were examined by X-ray Diffraction and Atomic Force Microscope with porosity analysis, whereas incorporation of graphene was verified by Raman spectroscopy. The wear test was conducted using the pin-on-disc, with varying parameters exhibiting superior wear resistance and coefficient of friction and wear mechanism maps were constructed. The hardness of coated surface is increased by 70% approximately which subsequently increased the wear performance of the coated Ti-6Al-4V.
Similar content being viewed by others
References
Kao WH, Su YL, Horng JH, Huang HC, Yang SE (2015) Improved tribological, electrochemical and biocompatibility properties of Ti6Al4V alloy by gas-nitriding and Ti-C: H coating. Surf Coat Technol 283:70–79
Ching HA, Choudhury D, Nine MJ, Abu Osman NA (2014) Effects of surface coating on reducing friction and wear of orthopaedic implants. Scie Technol Adv Mater 15(1):014402
Kang CW, Fang FZ (2018) State of the art of bioimplants manufacturing: part II. Adv Manuf 6(2):137–154
Zeng Y, Pei X, Yang S, Qin H, Cai H, Hu S et al (2015) Graphene oxide/hydroxyapatite composite coatings fabricated by electrochemical deposition. Surf Coat Technol 286:72–79
Kasar AK, Menezes PL (2018) Synthesis and recent advances in tribological applications of graphene. Int J Adv Manuf Technol 97(9–12):3999–4019
Kattimani VS, Kondaka S, Lingamaneni KP (2016) Hydroxyapatite—past, present, and future in bone regeneration. Bone Tissue Regen Insights. https://doi.org/10.4137/BTRI.S36138
Gao C, Feng P, Peng S, Shuai C (2017) Carbon nanotubes, graphene and boron nitride nanotubes reinforced bioactive ceramics for bone repair. Acta Biomaterialia Actbio S1742–7061(17):30302–30311
Yang K, Rong J, Liu C, Zhao H, Tao S, Ding C (2016) Study on erosion-wear behavior and mechanism of plasma-sprayed alumina-based coatings by a novel slurry injection method. Tribol Int 93:29–35
Palanivelu R, Kumar AR (2014) Scratch and wear behaviour of plasma sprayed nano ceramics bilayer Al2O3–13 wt%TiO2/hydroxyapatite coated on medical grade titanium substrates in SBF environment. Appl Surf Sci 315(1):372–379
Catauro M, Bollino F, Papale F, Giovanardi R, Veronesi P (2014) Corrosion behavior and mechanical properties of bioactive sol–gel coatings on titanium implants. Mater Sci Eng, C 43:375–382
Gómez-Gómez A, Nistal A, García E, Osendi MI, Belmonte M, Miranzo P (2016) The decisive role played by graphene nanoplatelets on improving the tribological performance of Y2O3–Al2O3–SiO2 glass coatings. Mater Des 112:449–455
Ren J, Zhao D, Qi F, Liu W, Chen Y (2020) Heat and hydrothermal treatments on the microstructure evolution and mechanical properties of plasma sprayed hydroxyapatite coatings reinforced with graphene nanoplatelets. J Mech Behav Biomed Mater 101:103418
Fardi SR, Khorsand H, Askarnia R, Pardehkhorram R, Adabifiroozjaei E (2020) Improvement of biomedical functionality of titanium by ultrasound-assisted electrophoretic deposition of hydroxyapatite-graphene oxide nanocomposites. Ceram Int 46:18297–18307
Jankovic A, Erakovic S, Mitric M, Mišković-stankovic V (2014) Bioactive hydroxyapatite/graphene composite coating and its corrosion stability in simulated body fluid. J Alloys Compd 12–14:11000
El-Aziz KA, Saber D, Sallam HEDM (2015) Wear and corrosion behavior of Al–Si matrix composite reinforced with alumina. J Bio- Tribo-Corros 1(1):1–10
Sarbishei S, Faghihi Sani MA, Mohammadi MR (2016) Effects of alumina nanoparticles concentration on microstructure and corrosion behavior of coatings formed on titanium substrate via PEO process. Ceram Int 42(7):8789–8797
Jafari S, Atabaki MM, Idris J (2012) Comparative study on bioactive coating of Ti-6al-4v alloy and 316 L stainless steel. Metall Mater Eng 18(2):145–158
Zhang Y, Lu J, Yang S (2012) Preparation of hydroxyapatite ceramic through centrifugal casting process using ultra-fine spherical particles as precursor and its decomposition at high temperatures. J Adv Ceram 1(1):60–65
Ayu HM, Izman S, Daud R, Krishnamurithy G, Shah A, Tomadi SH, Salwani MS (2017) Surface modification on CoCrMo alloy to improve the adhesion strength of hydroxyapatite coating. Proc Eng 184:399–408
Peng Y, Yi Y, Li L, Yi J, Nie J, Bao C (2016) Iron-based soft magnetic composites with Al2O3 insulation coating produced using sol–gel method. Mater Des 109:390–395
Zeng Y, Pei X, Yang S, Qin H, Cai H (2015) Graphene oxide/hydroxyapatite composite coatings fabricated by electrochemical deposition. Surf Coat Technol S0257–S8972(15):30444–30448
Munir K, Wen C, Li Y (2020) Graphene nanoplatelets-reinforced magnesium metal matrix nanocomposites with superior mechanical and corrosion performance for biomedical applications. J Magnes Alloys 8(1):269–290
Malhotra R, Han YM, Morin JLP, Luong-Van EK, Chew RJJ, Castro Neto AH et al (2020) Inhibiting corrosion of biomedical-grade Ti-6Al-4V alloys with graphene nanocoating. J Dent Res 99(3):285–292
Khorrami SA, Ahmad MB, Lotfi R, Shameli K, Sedaghat S, Shabanzadeh P, Baghchesara MA (2012) Preparation of γ-Al2O3 nanocrystallites by sol-gel auto combustion process and production of Al-Al2O3 aluminum matrix composites. Digest J Nanomater Biostruct 7(3):871–876
Souza JCM, Barbosa SL, Ariza EA, Henriques M, Teughels W, Ponthiaux P, Rocha LA (2015) How do titanium and Ti6Al4V corrode in fluoridated medium as found in the oral cavity ? An in vitro study. Mater Sci Eng, C 47:384–393
Domínguez-Trujillo C, Peón E, Chicardi E, Pérez H, Rodríguez-Ortiz JA, Pavón JJ et al (2018) Sol–gel deposition of hydroxyapatite coatings on porous titanium for biomedical applications. Surf Coat Technol 333:158–162
Selvam M, Sakthipandi K, Suriyaprabha R, Saminathan K, Rajendran V (2013) Synthesis and characterization of electrochemically-reduced graphene. Bull Mater Sci 36(7):1315–1321
Erakovi S, Park SJ, Rhee KY (2015) Graphene-based antibacterial composite coatings electrodeposited on titanium for biomedical applications. Prog Org Coat 83:1–10
Murugan N, Murugan C, Sundramoorthy AK (2018) In vitro and in vivo characterization of mineralized hydroxyapatite/polycaprolactone-graphene oxide based bioactive multifunctional coating on Ti alloy for bone implant applications. Arab J Chem 11:959–969
Straffelini G (2015) Wear mechanisms, vol 11. Springer, Cham, pp 85–113
Kovalchenko A, Ajayi O, Erdemir A, Fenske G, Etsion I (2004) The effect of laser texturing of steel surfaces and speed-load parameters on the transition of lubrication regime from boundary to hydrodynamic. Tribol Trans 47(2):299–307
Rasool G, Stack MM (2014) Wear maps for TiC composite based coatings deposited on 303 stainless steel. Tribol Int 74:93–102
Kataria S, Kumar N, Dash S, Tyagi AK (2010) Tribological and deformation behaviour of titanium coating under different sliding contact conditions. Wear 269(11–12):797–803. https://doi.org/10.1016/j.wear.2010.08.007
Rasool G, Mridha S, Stack MM (2015) Mapping wears mechanisms of TiC/Ti composite coatings. Wear 328–329:498–508
Santecchia E, Hamouda AMS, Musharavati F, Zalnezhad E, Cabibbo M, Spigarelli S (2015) Wear resistance investigation of titanium nitride-based coatings. Ceram Int 41(9):10349–10379
Martini C, Ceschini L, Casadei B, Boromei I, Guion JB (2011) Dry sliding behaviour of hydrogenated amorphous carbon (a-C:H) coatings on Ti-6Al-4V. Wear 271(9–10):2025–2036
Elaiyarasan U, Satheeshkumar V, Senthilkumar C (2019) A study on wear behaviour of electrical discharge-coated magnesium alloy. J Bio- Tribo-Corros 5(1):30
Li L, Feng J, Liang C, An J (2018) Dry sliding wear behavior and mild-severe wear transition of Mg97Zn1Y2 alloy at elevated temperatures. Materials 11(9):1735
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Shanmugapriya, P., Srinivasan, V., Karthikeyan, B. et al. Wear Study on SOL–GEL-Coated Ti-6Al-4V Alloy. J Bio Tribo Corros 6, 129 (2020). https://doi.org/10.1007/s40735-020-00423-1
Received:
Revised:
Accepted:
Published:
DOI: https://doi.org/10.1007/s40735-020-00423-1