Abstract
This research paper proposes a novel robotic gripper that combines rigid and soft components. The challenge of developing robotic grippers that can safely handle a wide variety of objects and remain stable, especially under harsh vibration, is addressed. The gripper uses a main rigid structure for maintaining the stiffness of the robot hand and soft pads under air pressurization for handling the softly and flexibly the objects. The proposed design capitalizes on the advantages of both rigid and soft grippers, by using rigid clamps to achieve robust gripping movements. Simultaneously, exploiting the soft pads’ deformation to generate gripping force, this integration not only has high reliability but also guarantees safety in gripping objects. The novel concept, design, and fabrication of the gripper are introduced. Then, the gripper’s ability was validated through mathematical modeling, analysis, and experiments. In particular, the geometrical kinematics of the rigid mechanism and deformation of the soft element is mathematical modeled and numerical simulation. Subsequently, the effective gripping size and contact force are analyzed. Experiments are conducted to verify the accuracy of the mathematical model and simulations, as well as to assess the capabilities of the proposed gripper design. The gripping experiment validates that the gripper can securely grasp a diverse range of objects while ensuring stability during subsequent movements, even under intense high-frequency vibration conditions. This gripper design can be applied for handling a wide range of objects with varying sizes, masses, fragility, and placement positions, specially when the gripping process necessitates both safe interaction and high reliability.
Similar content being viewed by others
Notes
References
Mohammed MQ, Kwek LC, Chua SC, Al-Dhaqm A, Nahavandi S et al (2022) Review of learning-based robotic manipulation in cluttered environments. Sensors 22:7938. https://doi.org/10.3390/s22207938
My CA et al (2019) Novel robot arm design and implementation for hot forging press automation. Int J Prod Res 57(14):4579–4593
Zhang L, Qian J, Tao S, Feijuan W, Chunping L (2020) A systematic review and meta-analysis of robotic gripper. IOP Conf Ser Mater Sci Eng 782:042055
Blanes C, Martín M, Coral O, Ángel V (2011) Review technologies for robot grippers in pick and place operations for fresh fruits and vegetables. Span J Agric Res 9:1130–1141
Roa MA, Suarez R (2015) Grasp quality measures: review and performance. Auton Robot 38:65–88
Spiers AJ, Liarokapis MV, Calli B, Dollar AM (2016) Single grasp object classification and feature extraction with simple robot hands and tactile sensors. IEEE Trans Haptics 9(2):207–220
My CA, Parnichkun M (2015) Kinematics performance and structural analysis for the design of a serial-parallel manipulator transferring a billet for a hot extrusion forging process. Int J Adv Rob Syst 12(12):186
My CA, Hoan VM (2019) Kinematic and dynamic analysis of a serial manipulator with local closed loop mechanisms. Vietnam J Mech 41(2):141–155
Faris O, Alyammahi H, Suthar B, Muthusamy R, Shah UH, Hussain I, Gan D, Seneviratne L, Zweiri Y (2023) Design and experimental evaluation of a sensorized parallel gripper with optical mirroring mechanism. Mechatronics 90:102955
Serkan M, Günter B, Johannes LJ (2023) A method to estimate the remaining useful lifetime of a two-jaw parallel gripper based on experimental failure threshold data. Proc Comput Sci 217:1599–1608. https://doi.org/10.1016/j.procs.2022.12.360
Chunhui Z, Xiao-J W, Zhengjie Z (2023) Modeling and experimental design of a generalized gripper. Mech Mach Theory 181:105205. https://doi.org/10.1016/j.mechmachtheory.2022.105205
Wolniakowski A, Miatliuk K, Gosiewski Z et al (2017) Task and context sensitive gripper design learning using dynamic grasp simulation. J Intell Robot Syst 87:15–42. https://doi.org/10.1007/s10846-017-0492-y
Tsourveloudis NC, Kolluru R, Valavanis KP et al (2000) Suction control of a robotic gripper: a neuro-fuzzy approach. J Intell Rob Syst 27:215–235. https://doi.org/10.1023/A:1008182619159
Abu-Zitar R, Al-Fahed Nuseirat AM (2001) A theoretical approach of an intelligent robot gripper to grasp polygon shaped objects. J Intell Rob Syst 31:397–422. https://doi.org/10.1023/A:1012094400369
Zhang Q, Shen D, Tian M et al (2022) Model-based force control of a tendon-sheath actuated slender gripper without output feedback. J Intell Rob Syst 106:79. https://doi.org/10.1007/s10846-022-01785-z
Ho V, Hirai S (2017) Design and analysis of a soft-fingered hand with contact feedback. IEEE Robot Autom Lett 2(2):491–498. https://doi.org/10.1109/LRA.2016.2645120
Chiwon L, Myungjoon K, Yoon JK, Nhayoung H, Seungwan R, Kim HJ, Kim S (2017) Soft robot review. Int J Control Autom Syst 15(1):1–13. https://doi.org/10.1007/s12555-016-0462-3
Hong KY, Hui YN, Yeow C-H (2016) High-force soft print-able pneumatics for soft robotic applications. Soft Rob 3(3):144–158. https://doi.org/10.1089/soro.2016.0030
Stuart H, Wang S, Khatib O, Cutkosky MR (2017) The ocean one hands: an adaptive design for robust marine manipulation. Int J Robot Res 36(2):150–166. https://doi.org/10.1177/0278364917694723
Tongil P, Keehoon K, Oh S-R, Youngsu C (2020) Electrohydraulic actuator for a soft gripper. Soft Rob. https://doi.org/10.1089/soro.2019.0009
Li H, Yao J, Wei C, Zhou P, Xu Y, Zhao Y (2021) An untethered soft robotic gripper with high payload-to-weight ratio. Mech Mach Theory 158:104226. https://doi.org/10.1016/j.mechmachtheory.2020.104226
Li H, Zhou P, Zhang S, Yao J, Zhao Y (2022) A high-load bioinspired soft gripper with force booster fingers. Mech Mach Theory 177:105048
Ye Y, Cheng P, Yan B et al (2022) Design of a novel soft pneumatic gripper with variable gripping size and mode. J Intell Rob Syst 106:5
Park W, Seo S, Bae J (2018) Development of a hybrid gripper with soft material and rigid structures. In: 2018 IEEE/RSJ International Conference on Intelligent Robots and Systems
Park Wookeun et al (2020) A sensorized hybrid gripper to evaluate a grasping quality based on a largest minimum wrench. IEEE Robot Autom Lett 5(2):3243–3250
Zhu Wenpei et al (2022) A soft-rigid hybrid gripper with lateral compliance and dexterous in-hand manipulation. IEEE/ASME Trans Mechatron 28:104
Białek M, Jȩdryczka C, Milecki A (2021) Investigation of thermoplastic polyurethane finger cushion with magnetorheological fluid for soft-rigid gripper. Energies 14(20):6541
Nishimura T, Mizushima K, Suzuki Y, Tsuji T, Watanabe T (2017) Variable-grasping-mode underactuated soft gripper with environmental contact-based operation. IEEE Robot Autom Lett 2(2):1164–71
Wang Z, Kanegae R, Hirai S (2021) Circular shell gripper for handling food products. Soft Rob 8(5):542–54
Dang H-M, Vo C-T, Nguyen V-D, Nguyen H-N, Tran A-V, Phung V-B (2021) A method for determining parameters of hyperelastic materials and its application in simulation of pneumatic soft actuator. Int J Comput Mater Sci Eng. https://doi.org/10.1142/S2047684121500172
Hiep XT, Van AH, Koji S (2018) Computational model for tactile sensing system with wrinkle’s morphological change. Adv Robot 32(21):1135–1150. https://doi.org/10.1080/01691864.2018.1525322
Hiep XT, Van AH, Koji S (2019) Theoretical foundation for design of friction-tunable soft finger with wrinkle’s morphology. IEEE Robot Autom Lett 4(4):4027–4034. https://doi.org/10.1109/LRA.2019.2926960
Funding
This research is funded by Le Quy Don Technical University Research Fund under the Grant Number 2022.QHT.04.
Author information
Authors and Affiliations
Contributions
Hiep Xuan Trinh conceived, designed, modeled, conducted the experiments and wrote the manuscript. Hoang-Hai Nguyen and Trung-Dung Pham designed, fabricated, and refined the manuscript. Chu Anh My refined the manuscript.
Corresponding author
Ethics declarations
Conflict of interest
The authors declare no conflict of interest.
Additional information
Technical Editor: Rogério Sales Gonçalves.
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Trinh, H.X., Nguyen, HH., Pham, TD. et al. A novel rigid-soft gripper for safe and reliable object handling. J Braz. Soc. Mech. Sci. Eng. 46, 176 (2024). https://doi.org/10.1007/s40430-024-04757-6
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s40430-024-04757-6