Abstract
The purpose of this work is to offer a comprehensive analysis of the buckling and strength of shell structures in accordance with several strength theories at once. Linear-elastic thin-walled orthotropic cylindrical panels are considered taking into account geometric nonlinearity and transverse shear. The applicability of seven strength criteria was analyzed: the maximum stress criterion, Mises–Hill criterion, Fisher criterion, Gol’denblat–Kopnov criterion, Liu–Huang–Stout criterion, Tsai–Wu criterion, and Hoffman criterion. The calculations were based on the characteristics of T-10/UPE22-27 glass-fiber-reinforced plastic. Simultaneously with the strength of the structure, its buckling was analyzed. The value of the critical load has been obtained. The analysis of the development of areas of non-fulfillment of strength conditions was conducted. The proposed method allows obtaining the most complete information about the process of deformation of the structure. The use of several strength criteria makes it possible to verify the obtained load values. The study of areas of non-fulfillment of the strength conditions allows in future to make a decision on strengthening the structure with stiffeners.
Similar content being viewed by others
References
Abramovich H, Zarutskii VA (2008) Stability and vibrations of nonclosed circular cylindrical shells reinforced with discrete longitudinal ribs. Int Appl Mech 44:16–22
Alijani F, Aghdam MM, Abouhamze M (2008) Application of the extended Kantorovich method to the bending of clamped cylindrical panels. European Journal of Mechanics—A/Solids 27:378–388
Ashok RB, Srinivasa CV, Suresh YJ, Prema Kumar WP (2015) Buckling behaviour of cylindrical panels. Nonlinear Eng 4:67–75
Luo K, Liu C, Tian Q, Hu H (2016) An efficient model reduction method for buckling analyses of thin shells based on IGA. Comput Methods Appl Mech Eng 309:243–268
Shariati M, Sedighi M, Saemi J, Eipakchi HR, Allahbakhsh HR (2010) Experimental study on ultimate strength of CK20 steel cylindrical panels subjected to compressive axial load. Arch Civil Mech Eng 10:117–130
Tornabene F, Brischetto S, Fantuzzi N, Viola E (2015) Numerical and exact models for free vibration analysis of cylindrical and spherical shell panels. Compos B Eng 81:231–250
Yiotis AJ, Katsikadelis JT (2015) Buckling of cylindrical shell panels: a MAEM solution. Arch Appl Mech 85:1545–1557
Zhou Y, Stanciulescu I, Eason T, Spottswood M (2015) Nonlinear elastic buckling and postbuckling analysis of cylindrical panels. Finite Elem Anal Des 96:41–50
Liew KM, Lee YY, Ng TY, Zhao X (2007) Dynamic stability analysis of composite laminated cylindrical panels via the mesh-free kp-Ritz method. Int J Mech Sci 49:1156–1165
Patel SN, Datta PK, Sheikh AH (2006) Buckling and dynamic instability analysis of stiffened shell panels. Thin Walled Struct 44:321–333
Fazilati J, Ovesy HR (2012) Finite strip dynamic instability analysis of perforated cylindrical shell panels. Compos Struct 94:1259–1264
Feng K, Xu J (2017) Buckling analysis of composite cylindrical shell panels by using legendre polynomials hierarchical finite-strip method. J Eng Mech 143:04016121
Less H, Abramovich H (2012) Dynamic buckling of a laminated composite stringer-stiffened cylindrical panel. Compos B Eng 43:2348–2358
Ganeeva MS, Sachenkova GV (1974) Large deflections and rigidity of a long cylindrical orthotropic glass-plastic panel subjected to intermittent-uniform loads. Polym Mech 8:724–730
Ye J, Soldatos KP (1994) Three-dimensional stress analysis of orthotropic and cross-ply laminated hollow cylinders and cylindrical panels. Comput Methods Appl Mech Eng 117:331–351
Kosytsyn S, Akulich V (2022) Influence of stage-by-stage construction of a cylindrical shell on stress-strain states of an existing nearby shell in a soil body. Int J Comput Civ Struct Eng 18:112–120
Jebur A, Hassoun E, Abrahem H, Khayrullin FS, Sakhbiev OM (2020) Shell stress analysis using a variational method based on three-dimensional functions with finite carriers. J Appl Eng Sci 18:110–113
Yasunaga J, Uematsu Y (2020) Dynamic buckling of cylindrical storage tanks under fluctuating wind loading. Thin Walled Struct 150:106677
Kayumov RA, Tazyukov BF, Muhamedova IZ (2016) Nonlinear problems of stability cylindrical panels with imperfection. IOP Conf Ser Mater Sci Eng 158:012051
Leonenko DV, Starovoitov EI (2016) Vibrations of cylindrical sandwich shells with elastic core under local loads. Int Appl Mech 52:359–367
Biswal M, Sahu SK, Asha AV (2016) Vibration of composite cylindrical shallow shells subjected to hygrothermal loading-experimental and numerical results. Compos B Eng 98:108–119
Waqas HM, Shi D, Khan SZ, Helal M, Fathallah E (2022) Analytical modeling of cross-ply cylindrical composite submersible shell with elastic buckling using first order shear deformation theory. Front Mater 9:1004752
Liu J, Yu B, Zhou Y, Zhang Y, Duan M (2021) The buckling of spherical-cylindrical composite shells by external pressure. Compos Struct 265:113773
Rafiee M, Hejazi M, Amoushahi H (2021) Buckling response of composite cylindrical shells with various stiffener layouts under uniaxial compressive loading. Structures 33:4514–4537
Bakulin VN, Danilkin EV, Nedbai AYA (2018) Dynamic stability of a cylindrical shell stiffened with a cylinder and longitudinal diaphragms at external pressure. J Eng Phys Thermophys 91:537–543
Karpov VV (2018) Models of the shells having ribs, reinforcement plates and cutouts. Int J Solids Struct 146:117–135
Keshav V, Patel SN, Kumar R, Watts G (2022) Effect of cutout on the stability and failure of laminated composite cylindrical panels subjected to in-plane pulse loads. Int J Struct Stab Dyn 22:2250087
Ghasemi AR, Tabatabaeian A, Hajmohammad MH, Tornabene F (2021) Multi-step buckling optimization analysis of stiffened and unstiffened polymer matrix composite shells: a new experimentally validated method. Compos Struct 273:114280
Li S, Sitnikova E, Liang Y, Kaddour A-S (2017) The Tsai-Wu failure criterion rationalised in the context of UD composites. Compos A Appl Sci Manuf 102:207–217
Sengupta J, Ghosh A, Chakravorty D (2015) Progressive failure analysis of laminated composite cylindrical shell roofs. J Fail Anal Prev 15:390–400
Ellul B, Camilleri D, Betts JC (2014) A progressive failure analysis applied to fiber-reinforced composite plates subject to out-of-plane bending. Mech Compos Mater 49:605–620
Osswald PV, Osswald TA (2018) A strength tensor based failure criterion with stress interactions. Polym Compos 39:2826–2834
Galicki J, Czech M (2013) A new approach to formulate the general strength theories for anisotropic discontinuous materials. Part A: the experimental base for a new approach to formulate the general strength theories for anisotropic materials on the basis of wood. Appl Math Model 37:815–827
Maksimović K, Maksimović M, Vasović-Maksimović I, Rašuo B, Maksimović S (2020) Postbuckling and failure analysis of layered composite panels. FME Transactions 48:447–453
Li J, Liu C, Hu H, Zhang S (2021) Analysis of elasto-plastic thin-shell structures using layered plastic modeling and absolute nodal coordinate formulation. Nonlinear Dyn 105:2899–2920
Abrosimov NA, Novosel’tseva NA (2017) Computer modeling of the dynamic strength of metal-plastic cylindrical shells under explosive loading. Mech Comp Mater 53:139–148
Zhang X, Li Z, Wang P, Pan G (2022) Experimental and numerical analyses on buckling and strength failure of composite cylindrical shells under hydrostatic pressure. Ocean Eng 249:110871
Semenov A (2023) Method of strength analysis for doubly-curved stiffened orthotropic shells by various strength theories. FME Trans 51:211–220
Fisher L (1960) How to predict structural behavior of R.P. Laminates Mod Plast 37:122–209
Gol’denblat II, Kopnov VA (1968) Criteria for Strength and Plasticity of Structural Materials. Mashinostroenie, Moscow
Liu C, Huang Y, Stout MG (1997) On the asymmetric yield surface of plastically orthotropic materials: a phenomenological study. Acta Mater 45:2397–2406
Tsai SW, Wu EM (1971) A general theory of strength for anisotropic materials. J Compos Mater 5:58–80
Hoffman O (1967) The brittle strength of orthotropic materials. J Compos Mater 1:200–206
Semenov AA, Leonov SS (2019) the continuous method of solution continuation with respect to the best parameter in the calculation of shell structures. Uchenye Zapiski Kazanskogo Universiteta Seriya Fiziko-Matematicheskie Nauki 161:230–249
Tyshkevich VN (2011) The choice of criteria for the strength of pipes made of reinforced plastics. Izv VSTU, 76–79
Zaitsev GP, Tyshkevich VN (1993) Optimal design of curved cross-ply glass-plastic pipes. Mech Compos Mater 28:323–327
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The author declare no conflict of interest.
Additional information
Technical Editor: Marcelo Areias Trindade.
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Semenov, A. Strength and buckling analysis for cylindrical shell panels by various strength theories. J Braz. Soc. Mech. Sci. Eng. 46, 58 (2024). https://doi.org/10.1007/s40430-023-04644-6
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s40430-023-04644-6