Abstract
The development of analytical platforms incorporating Au nanoparticles (NPs) for optical biosensing requires approaches to produce optically responsive and target selective materials. In the present work, fluorescence emission and bioselectivity of Au NPs have been combined by a one-step surface functionalization using fluorescein isothiocyanate (FITC) and biotin. First, colloidal Au NPs (d = 17.7 ± 2.7 nm) exhibiting an absorption maximum (λmax) at 524.5 nm have been surface-modified with the polyelectrolytes (PE) poly(allylamine hydrochloride) (PAH) and poly(sodium styrene sulfonate) (PSS). Two strategies were then assessed for the functionalization of Au NPs: (i) functionalization of PAH with biotin and subsequent coating of the NPs and (ii) surface modification of the NPs with the PE followed by post-functionalization with biotin. The effect of the surface functionalization on the colloidal NPs was monitored by optical absorption and fluorescence emission spectroscopies, dynamic light scattering (DLS), zeta potential measurements and transmission electron microscopy (TEM). Finally, the optical response and specificity of the functionalized NPs towards avidin was evaluated by optical measurements. The results have shown that these hybrid nanostructures have potential to be used in biosensing. In particular, the aggregation of biotinylated Au assemblies associated with the biorecognition of avidin could be assessed by fluorescence emission spectroscopy.
Similar content being viewed by others
Avoid common mistakes on your manuscript.
Introduction
Gold nanoparticles (Au NPs) have been widely studied for diverse bioapplications namely due to their optical properties which are dependent on the morphological characteristics and surrounding medium [1–5]. These properties result from the fact that colloidal Au NPs show a surface plasmon resonance (SPR) absorption band in the visible region whose location and profile depends on particle size and shape, refractive index of the surrounding medium and interparticle neighbouring [4]. Yet, the application of Au NPs in biological systems requires further surface modification to achieve stability in aqueous medium and the ability to interact with the surroundings, thus enabling the detection of target bioanalytes. Indeed, functionalized Au NPs can be used as a platform for bioanalytes-receptor interactions which can be detected by optical means as a result of changes of interparticles distance (e.g. aggregation) [6, 7]. Examples of the use of this property include the recognition of a specific DNA strand [8, 9] as well as protein-ligand systems such as (strept)avidin-biotin [10, 11].
There are several methods to synthesize Au NPs which can result in different sizes and shapes of NPs [6]. A popular method is the citrate method reported by Turkevich et al. [12] which yields nanospheres with diameters between ~10 and 50 nm stabilized by citrate anions. These Au NPs can be further functionalized in order to ensure adequate stabilization in other media. For instance, Au NPs can be modified using Lewis bases, thiols [13–15], and DMAP (4-(dimethylamino)pyridine) which provide an organic coat at the surface [16]. In fact, the surface chemistry of NPs is an area of major interest due to the possibility of controlling the shell composition, charge, thickness, and the ability for surface functionalization using diverse strategies that include attachment of antibodies, fluorophores, and polymers. As a consequence, these functionalized Au NPs have found wide interest in areas such as pharmaceutics, biomedicine, photonics, and new optical materials [17–22].
Another way to obtain stable colloids is by coating the NPs via electrostatic assembly of polyelectrolytes following the layer-by-layer (LbL) deposition method [14, 23–25]. This type of coating not only stabilizes the nanoparticles, but also provides a path to modify the surface with molecules of interest in bioapplications [26–28]. It is a very simple, easy, and versatile method, however, to yield stable coated nanoparticles an efficient separation of nanoparticles after the coating must be ensured [17, 24, 27, 29]. This is not straightforward especially when multifunctional systems are involved.
Another effect associated with the use of colloidal Au NPs that can be exploited in optical biosensing results from the fluorescence emission quenching of a neighbouring fluorophore. This effect occurs when the emission spectrum of a fluorescent species (donor) overlaps the SPR band of Au NPs (acceptor). In close proximity, the donor molecules transfer energy to the acceptor particle resulting in fluorescence quenching. This has been described as the result of a combination of two effects: FRET (fluorescence resonance energy transfer) and NSET (nanoparticle surface energy transfer), the latter occurring for distances nearly twice as those observed for FRET [30–34]. Schneider et al. [35] have shown the dependence of the distance between Au NPs and two fluorophores (fluorescein isothiocyanate—FITC and Lissamine Rhodamine—LISS) on the quenching effect. The study of this effect allows monitoring the binding and unbinding states of the analyte because they are associated to changes in fluorescence intensity [36–39]. In turn, Aslan et al. [40, 41] have investigated the fluorescence quenching effect using biotinylated Au NPs and anti-biotin labelled with the fluorophore Alexa™ 488. These authors have observed that after addition of biotinylated Au NPs to an anti-biotin solution, there was a strong decrease of the fluorophore emission intensity, which increased again upon further addition of free biotin.
The present work focuses on the surface modification and functionalization of Au NPs using polyelectrolytes and the electrostatic self-assembly method to confer fluorescence and biospecificity to the resulting colloids. As such, a variety of procedures have been investigated that combine the use of an organic dye (FITC) and a specific bioanalyte (biotin). The ensuing functionalized Au/PE assemblies were used in biosensing experiments to explore their optical properties as quencher when aggregation of Au NPs was induced.
Materials and methods
Chemicals
Hydrogen tetrachloroaurate (III) trihydrate, 99.9 + % (HAuCl4.3H2O), sodium citrate tribasic dehydrate, ≥ 99 % (Na3C6H5O7.2H2O), biotin, ≥ 99 %, avidin from egg white ≥ 98 %, fluorescein isothiocyanate isomer I (FITC), N-(3-dimethylaminopropyl)-N′-ethyl-carboiimide (EDC), poly(allylamine hydrochloride) MW 15,000 (PAH), and poly(styrenesulfonic acid sodium salt) MW 17,000 (PSS) were purchased from Sigma-Aldrich. Potassium hydroxide (pellets) was purchased from LabChem. Dimethyl sulfoxide (DMSO), >99.7 %, was purchased from SdS Carlo Erba. Ultrapure water purified using a Station 8000/Station 9000 purification unit was used throughout the work.
Instrumentation
The UV/VIS spectra of the colloids were recorded using quartz cells and a Jasco V-560 UV/VIS spectrometer, using water as the reference. The fluorescence spectra of the colloids were recorded using quartz cells and a FluoroMax-3 Horiba Jobin Yvon spectrometer. Transmission electron microscopy (TEM) images were obtained using a Hitachi H-9000 microscope operated at 300 kV. The samples were prepared by placing a drop of diluted colloidal solutions on a copper grid coated with an amorphous carbon film and left to evaporate. The zeta potential and dynamic light scattering (DLS) measurements were carried out using a ZetaSizer Nano ZS Model Zen 3500 from Malvern. For DLS measurements, one drop of the colloidal solution was diluted in circa 1 mL of water. For the zeta potential measurements, the colloids were analysed as prepared (the pH of the colloids varied between 5.5 and 6.5, room temperature). Centrifugation was performed in a Force 1618 Microcentrifuge at room temperature.
Synthesis of Au NPs
Ten milliliter of sodium citrate solution (38.8 mM) were added to 100 mL of HAuCl4.3H2O solution (1 mM) previously brought to 90 °C and under vigorous stirring. After 1 h, heating was switched off and stirring was kept overnight. The concentration of the gold nanoparticle stock solution obtained was estimated according to the method published by Schneider et al. [35] to be around 12 nmol/L in particles. This solution was centrifuged in 1.5 mL Eppendorfs for 1.5 h at 14,000 rpm (15,996 g) before use. The supernatant was removed from each tube and replaced by ultrapure water using a volume twice that of the initial.
In order to prepare the poly(allylamine hydrochloride) polyelectrolyte modified with fluorescein (PAHF), PAH (208.6 mg) was dissolved in 20 mL of water and aqueous KOH solution (3 M) was added dropwise to the stirred solution until pH 9.4. Next, fluorescein isothiocyanate (8.4 mg) was added, and the solution was stirred overnight under exclusion of light. Under the same conditions, the mixture was dialysed (Spectra/Por® Dialysis Membrane MWCO 6–8 kDa from SpectrumLabs.com) using DMSO in water (~0.1 %V/V) to remove unreacted fluorophore. During this process, the dialysate was monitored by optical spectroscopy.
Biotinylated PAH (PAHB) and PAHF (PAHFB) polyelectrolytes were prepared by adding 2 mL of biotin solution (1 mg/mL) and 2 mL of EDC solution (2 mg/mL) to 20 mL of a PAH solution (5 mg/mL, pH = 5.5) or PAHF (~5 mg/mL, pH = 5.5). The solutions were mixed and stirred for 1 h at room temperature. These solutions were not dialyzed and were used to modify Au NPs.
Preparation of Au/PE hybrid nanostructures
In this work, Au/PE hybrid nanostructures with a distinct number of layers (n = 0 or 2) have been prepared: Au0PAH (with a single PE layer) and Au2PAH (with one intermediary bi-layer of PAH/PSS and a third outermost layer of PE), as illustrated in Fig. 1.
Typically, 60 mL of the Au NPs colloid was added dropwise, under vigorous stirring, to 60 mL of a solution of PAH (5 mg/mL) and stirred for 2 h, at room temperature. The mixture was centrifuged for 60 min at 14,000 rpm (15,996 g). The supernatant was removed and the precipitate re-dispersed in water. This step was repeated once again and the re-dispersed volume after the second centrifugation was adjusted in order to obtain a final volume of 60 mL to yield a NPs colloid designated as Au0PAH. Then, these NPs were added dropwise, under vigorous stirring, to 60 mL of a solution of PSS (6.25 mg/mL) and stirred for 2 h at room temperature. The mixture was centrifuged for 60 min at 14,000 rpm (15,996 g). The supernatant was removed and the precipitate re-dispersed in water. This centrifugation process was repeated and the re-dispersed volume after this second centrifugation was adjusted in order to obtain a final volume of 60 mL. At the end of this second surface modification, the hybrid nanostructures Au/PAH/PSS named as Au2 NPs have been obtained (Fig. 1b). Finally, the outermost layer (Fig. 1c) was deposited following the same procedure and using two biotinylation strategies.
Biotinylation—strategy 1
The biotinylation of the surface-modified Au NPs was first explored following a procedure similar to the preparation of Au0 and Au2 NPs. The modified polyelectrolytes—PAHF, PAHB or PAHFB have been used in this strategy using 10 mL of colloid. The scheme illustrating this surface modification is shown in Fig. 1c.
A posteriori biotinylation—strategy 2
A second strategy for the biotinylation of the Au NPs was also investigated following the path also illustrated in Fig. 1c. In this procedure, 1 mL of biotin (1 mg/mL) and 1 mL of EDC (2 mg/mL) were added to the colloids AunPAH or AunPAHF (10 mL). The mixtures were stirred for 1 h and then centrifuged (60 min, 14,000 rpm–15,996 g) to remove the unreacted biotin. The supernatant was removed and replaced by water (final volume = 10 mL). The resulting nanostructures were named AunPAH+B and AunPAHF+B, respectively. The “+” means that biotinylation was carried out a posteriori, thus yielding samples distinct from those obtained in strategy 1.
Optical response of Au/PE assemblies to avidin
In order to evaluate the potential use of the biotinylated hybrid Au/PE nanostructures in optical biosensing, the optical behavior of the respective colloids was studied in the presence of avidin. In this case, the samples AunPAH and AunPAHF were used as blanks regarding the response to avidin. One hundred microliter of an avidin solution (0.4 mg/mL) was added to 1 mL of the colloidal solution diluted twofold. One week later, optical measurements have also been performed in order to evaluate the stability of the colloids. Parallel to this, as it was thought that the amount of avidin added could be too small to trigger a specific response, the theoretical quantity of avidin to interact with all the biotin in the system was added to each colloid. The spectra were recorded immediately upon addition of the avidin and 2 h later. For adequate evaluation of the optical response of the colloids in the presence of avidin, data were compiled as described below.
The original colloidal Au NPs presented a SPR band at around 525 nm. The intensity of this band decreased, and light absorption between 600 and 750 nm became noticeable due to particle aggregation. In a first approximation, by assuming that these differences in terms of band intensity are mainly due to an aggregation process and by not taking into account band broadening, we have defined a semi-quantitative parameter indicative of aggregation extension due to the presence of avidin:
where A SPR (colloid + avidin): absorbance at the SPR wavelength for a colloid in the presence of avidin, A 650 (colloid + avidin): absorbance at 650 nm for a colloid in the presence of avidin, A SPR (colloid): absorbance at the SPR wavelength for the initial colloid and A 650 (colloid): absorbance at 650 nm for the initial colloid.
For the FITC functionalized Au colloids, attempts have been made to correlate fluorescence measurements with aggregation effects due to the presence of avidin. Hence, the ratio between the fluorescence intensity (at 517 nm) of the Au colloid in the presence of avidin and that of the initial Au colloid, I 517(avidin)/I 517(colloid), was calculated for the experimental conditions indicated in the respective graphs.
Results and discussion
The preparation of stable Au hydrosols that allows their efficient separation and manipulation without compromising their optical properties is not an easy task. This is particularly more complex for systems envisaging multifunctionality that associate other properties to the plasmonic behaviour of Au colloids, as recently reviewed [27]. As such, a systematic strategy was followed in the present work in order to investigate the following aspects: (i) number of polyelectrolyte (PE) layers; (ii) strategy to functionalize the outermost layer of the Au NPs; (iii) adequate optical technique to monitor the biosensing ability of the ensuing functionalized nanostructures. Figure 1 shows the strategy followed in this work towards the biotinylation of Au/PE assemblies.
The colloidal stability of the functionalized Au nanostructures was monitored by UV/VIS spectroscopy (Fig. 2a), and the spectra collected for all the samples have shown the typical SPR band of colloidal Au, peaked at about 525 nm. The small shift of the SPR maximum from 524.5 to 526.5 nm after PE treatment of the Au NPs is attributed to slight changes of the dielectric constant of the particles surrounding medium [29]. Also noticeable is the fact that the Au/PE nanostructures containing PSS exhibit a strong optical absorption in the UV region (peaked at 225 nm) which is due to π-π* electronic transitions of the benzene ring in the polyelectrolyte [29]. The zeta potential measurements (Fig. 2b) performed on colloidal Au treated with oppositely charged polyelectrolytes agree with the results obtained by UV/VIS spectroscopy. Whilst, the starting Au NPs show a negative ζ potential ( −55 mV) due to the citrate anions adsorbed at their surfaces, upon surface modification with the cationic polyelectrolyte PAH it changes to +62 mV, at the same pH value. Conversely, the treatment of the resulting colloids with the anionic polyelectrolyte PSS led to a negative value of zeta potential ( −84 mV), and finally, the deposition of the third layer of PAH confers the colloidal particles a highly positive surface charge (+73 mV), that renders colloidal stability to the Au/PE dispersed in water.
The morphologies of the Au/PE particles during the functionalization process were probed by TEM, and a systematic analysis of a number of TEM images has shown Au/PE core/shell structures whose cores have an average diameter of 17.7 ± 2.7 nm that did not change significantly after PE treatment. On the other hand, as illustrated in Fig. 3, the TEM images suggest an increase of the shell thickness from Au0PAH to Au2PAH in line with the increase in the number of PE layers deposited onto the Au cores. From these results, the PE shell thickness was estimated to be about 2–4 nm, which is close to the value reported previously of 1.5 nm thickness for PAH/PSS bi-layers coating colloidal Au NPs [35]. Figure 3 also shows a set of three Au NPs wrapped by PAH layers, but it must be emphasised that this type of clustered structures was not predominant in the several samples analysed. Instead, the surface-modified Au samples appeared mainly as discrete particles coated with PE.
The biotinylation of the Au/PE nanostructures was monitored by optical absorption and fluorescence emission measurements for the diverse strategies employed. In general, the visible spectra have shown that biotinylation did not lead to significant changes of the SPR band for the surface-modified samples, namely by comparison with the starting colloid shown in Fig. 2a. However, an exception was observed for the Au0PAH+B sample, in which the biotinylation of Au0PAH resulted in a colloid whose visible spectrum also shows an absorption band peaked at 650 nm (Fig. 4a). Even though this effect is slightly detected for sample Au0PAHB, it is hardly significant. This new band is probably associated with interparticle plasmon coupling resulting from the loss of colloidal stability during the biotinylation of Au0PAH colloids. Interestingly, the nanostructures having an extra PE bilayer (Au2PAH+B) did not show such optical behaviour upon a similar biotinylation treatment, as illustrated in Fig. 4b. Although there is a slight red shift of the SPR band (Δλ = 2.5 nm) observed in the spectra of the Au2PAH colloid and of the corresponding biotinylated sample (Au2PAH+B), both visible spectra are similar. These results indicate that the intermediate PAH/PSS coating confers more robustness towards a posteriori treatment with biotin (or post-biotinylation), as opposed to what was observed for the biotinylation of the Au0PAH sample, in which the PE monolayer was not capable of preventing the formation of aggregates.
Fluorescent Au/PE assemblies were prepared by labelling the outermost PE layers with a fluorescent organic dye. For that purpose, the PAH chains were first functionalized with FITC to afford PAHF which was then used in the coating of the Au NPs yielding FITC labelled Au0PAHF and Au2PAHF assemblies. Similarly to the FITC non-labelled systems described above, these fluorescent nanostructures were used as starting colloids in biotinylation procedures. As expected, the FITC labelled Au/PE nanostructures showed a broader absorption band that takes into account the contribution of both the SPR band (λmax = 526.5 nm) of the Au NPs and the absorption due to FITC molecules (λmax = 497 nm). The visible spectra of biotinylated FITC labelled assemblies were similar regardless of the biotinylation procedure used (Fig. 5). However, as previously observed for the FITC unlabelled analogues, post-biotinylation of the Au0PAHF nanostructures caused significant changes on the respective visible spectrum, which is ascribed to the loss of colloidal stability during the biotinylation step. However, this was not observed for the Au2PAHF+B assemblies. These results confirm that the presence of an extra PE bilayer leads to more robust colloids, thereby providing enhanced colloidal stability during post-biotinylation (Fig. 5a, c).
The fluorescence emission measurements (Fig. 5b, d) are in agreement with the results discussed above regarding the stability of each colloidal system. The fluorescence emission intensity depends on the biotinylation path followed and on the presence of the extra PE bilayer. Regarding the Au nanostructures with the extra PE bilayer, the presence of biotin has an incremental effect on the fluorescence emission intensity. For Au2PAHFB, the increase of the fluorescence intensity is more pronounced when compared to the sample obtained via post-biotinylation (sample Au2PAHF+B). This is attributed to the fact that in sample Au2PAHFB, the biotinylated polyelectrolyte may adopt a conformation around the Au NP that provides a longer distance between the fluorophore molecules and the metal surface, when compared to the non-biotinylated sample. In this situation, the fluorophore molecules being further away from the Au surfaces limit the FITC fluorescence quenching as a result of the fact that the process of energy transfer from FTIC (the donor) to Au (the acceptor) is dependent on the distance between them [35]. This explanation is in line with the observation that the Au2PAHFB assemblies are more stable with subsequent increase of the FITC fluorescence emission (Fig. 5d). As regards the sample Au2PAHF+B, the increment on the fluorescence intensity was not so pronounced after biotinylation. This may be associated with the reduction of the number of protonated aminic groups available for colloidal electrostatic stabilization. As a result, the colloidal stability of the nanostructures is compromised causing a detrimental effect on the FITC fluorescence emission due to the reduced distance between the fluorophore and the Au surfaces. Note that this explanation is consistent with the visible spectrum of Au NPs modified with a single PE layer shown in Fig. 5a for the same sample. Indeed, the fluorescent intensity for the Au0PAHF+B sample is even smaller than that recorded for the sample without biotin (Au0PAHF) as shown in Fig. 5b. However, when an extra PE bilayer was used, the detrimental effect of the post-biotinylation process was less pronounced.
In order to assess the optical response of the biotinylated Au/PE nanostructures for biosensing, avidin was added to all of the nanostructures prepared including the Au nanostructures without the extra PE bilayer. The nanostructures without biotin were used as blanks regarding the response to avidin under the same experimental conditions. Then the effect of time and analyte concentration was assessed by exposing the samples to solutions of avidin of two distinct concentrations and for different periods of time. All the results have been compiled and plotted in Figs. 6 and 7 as described in the “Materials and methods” section.
As regards the optical response of these assemblies towards the presence of avidin in terms of the absorbance of the SPR band, a general trend towards its reduction is observed as illustrated in Figs. 6 and 7a, c, which suggests that all the nanostructures respond to the presence of avidin, including those without biotin. This is an indication that both specific and non-specific interactions between avidin and the functionalized Au/PE assemblies took place. The reason for non-specific interactions seems to be associated with changes of the surrounding medium that affects colloidal stability which is particularly evident for the non-labelled assemblies submitted to the post-biotinylation method (namely those prepared with only one layer of PAH—see Fig. 6a). Indeed, Qian et al. have reported that non-specific interactions of streptavidin with uncoated Au NPs occurred via uncertain group binding [42]. Therefore, these non-specific interactions may result from deficient surface protection associated with changes of composition of the surrounding medium. In view of the susceptibility of the Au assemblies prepared with only one PE layer (Au0NPs), it is difficult to ascertain the formation of any specific interactions; thus, focus was given to the more robust assemblies prepared using the extra PE bilayer (Au2NPs). As regards the biotinylated Au nanostructures, only the Au2PAH+B seem to show a distinct response towards the presence of avidin (Fig. 6b), whilst the samples labelled with FITC, i.e., Au2PAHFB and Au2PAHF+B, have both shown specific response when compared to the control sample Au2PAHF (Fig. 7c). In fact, when 100 μL of avidin were used, the reduction of ΔA(avidin/colloid) was only noticeable upon 1 week. Yet, when 200 μL of avidin were used, that reduction was almost immediate.
Whilst the optical spectra provide some information regarding the behavior of this type of Au assemblies towards the presence of avidin, more expressive results were obtained when fluorescence spectroscopy was used (Fig. 7d), which may indicate specific interaction between the biotin and the avidin. Although the observed decrease in the I 517(avidin)/I 517(colloid) might be caused by particle aggregation following the addition of avidin, the optical response for the biotinylated samples was more pronounced which might be associated with their specific molecular recognition for avidin and associated quenching effects. Moreover, comparison with the results shown in Fig. 7b for the FITC labelled samples prepared with one single layer, it is clear that the effect of non-specific interactions leads to a distinct response associated with their poor colloidal stability but that cannot be discerned by optical spectroscopy.
Conclusions
Surface functionalization of gold nanoparticles was accomplished using functionalized polyelectrolytes and the electrostatic self-assembly method. The use of an extra PE bilayer between the Au core and the outermost functional layer proved to be crucial to provide robustness and stability to the ensuing nanostructures. Strategies to functionalize PAH led to the preparation of multifunctional Au nanostructures with fluorescence and biorecognition properties, which combine an organic fluorophore (FITC) and a biolinker (biotin). The functionalized Au nanostructures have shown potential for biosensing applications due to their optical response in forming biotin-avidin conjugates. Worth noting is the fact that in these tests, the analyte was not labelled with a fluorophore, as reported by others [41]. Moreover, whilst small changes due to particle aggregation during the bioassays caused a small reduction of ΔA(avidin/colloid), similar changes caused a pronounced decrease of the FITC emission band in the fluorescence emission spectra (I 517(avidin)/I 517(colloid)). Thus, fluorescence emission spectroscopy emerged here as an interesting tool to assess the ability of biotinylated Au assemblies to recognize avidin.
References
Trindade T, da Silva ALD (eds) (2011) Nanocomposite particles for bio-applications. Materials and bio-interfaces. Pan Stanford Publishing Pte. Ltd., Singapore. doi:10.4032/9789814267816
Vidotti M, Carvalhal RF, Mendes RK, Ferreira DCM, Kubota LT (2011) Biosensors based on gold nanostructures. J Braz Chem Soc 22:3–20. doi:10.1590/S0103-50532011000100002
Zeng S, Yong K-T, Roy I, Dinh X-Q, Yu X, Luan F (2011) A review on functionalized gold nanoparticles for biosensing applications. Plasmonics 6:491–506. doi:10.1007/s11468-011-9228-1
Liz-Marzán LM (2004) Nanometals: formation and color. Mater Today 7:26–31. doi:10.1016/S1369-7021(04)00080-X
Dreaden EC, Alkilany AM, Huang X, Murphy CJ, El-Sayed MA (2012) The golden age: gold nanoparticles for biomedicine. Chem Soc Rev 41:2740–2779. doi:10.1039/c1cs15237h
Daniel M-C, Astruc D (2004) Gold nanoparticles: assembly, supramolecular chemistry, quantum-size-related properties, and applications toward biology, catalysis, and nanotechnology. Chem Rev 104:293–346. doi:10.1021/cr030698+
Saha K, Agasti SS, Kim C, Li XN, Rotello VM (2012) Gold nanoparticles in chemical and biological sensing. Chem Rev 112:2739–2779. doi:10.1021/cr2001178
Sato K, Hosokawa K, Maeda M (2003) Rapid aggregation of gold nanoparticles induced by non-cross-linking DNA hybridization. J Am Chem Soc 125:8102–8103. doi:10.1021/ja034876s
Storhoff JJ, Lazarides AA, Mucic RC, Mirkin CA, Letsinger RL, Schatz GC (2000) What controls the optical properties of DNA-linked gold nanoparticle assemblies? J Am Chem Soc 122:4640–4650. doi:10.1021/ja993825l
Kohut A, Voronov A, Peukert W (2005) Organization of functionalized gold nanoparticles by controlled protein interactions. Part Part Syst Charact 22:329–335. doi:10.1002/ppsc.200500986
Aslan K, Luhrs CC, Perez-Luna VH (2004) Controlled and reversible aggregation of biotinylated gold nanoparticles with streptavidin. J Phys Chem B 108:15631–15639. doi:10.1021/jp036089n
Turkevich J, Stevenson PC, Hillier J (1951) A study of the nucleation and growth processes in the synthesis of colloidal gold. Discuss Faraday Soc 11:55–75. doi:10.1039/DF9511100055
Gittins DI, Caruso F (2001) Tailoring the polyelectrolyte coating of metal nanoparticles. J Phys Chem B 105:6846–6852. doi:10.1021/jp0111665
Gittins DI, Caruso F (2000) Multilayered polymer nanocapsules derived from gold nanoparticle templates. Adv Mater 12:1947–1949. doi:10.1002/1521-4095(200012)12:24<1947::aid-adma1947>3.0.co;2-8
Higashi N, Takagi T, Koga T (2010) Layer-by-layer fabrication of well-packed gold nanoparticle assemblies guided by a [beta]-sheet peptide network. Polym J (Tokyo, Jpn) 42:95–99. doi:10.1038/pj.2009.311
Cho JH, Caruso F (2005) Investigation of the interactions between ligand-stabilized gold nanoparticles and polyelectrolyte multilayer films. Chem Mater 17:4547–4553. doi:10.1021/cm050972b
Labouta HI, Schneider M (2010) Tailor-made biofunctionalized nanoparticles using layer-by-layer technology. Int J Pharm 395:236–242. doi:10.1016/j.ijpharm.2010.05.019
Parveen S, Misra R, Sahoo SK (2012) Nanoparticles: a boon to drug delivery, therapeutics, diagnostics and imaging. Nanomedicine Nanotechnol Biol Med 8:147–166. doi:10.1016/j.nano.2011.05.016
Yeh Y-C, Creran B, Rotello VM (2012) Gold nanoparticles: preparation, properties, and applications in bionanotechnology. Nanoscale 4:1871–1880. doi:10.1039/C1NR11188D
Kimura M, Kobayashi S, Kuroda T, Hanabusa K, Shirai H (2004) Assembly of gold nanoparticles into fibrous aggregates using thiol-terminated gelators. Adv Mater 16:335–338. doi:10.1002/adma.200305804
Pinto RJB, Marques PAAP, Martins MA, Neto CP, Trindade T (2007) Electrostatic assembly and growth of gold nanoparticles in cellulosic fibres. J Colloid Interface Sci 312:506–512. doi:10.1016/j.jcis.2007.03.043
Manson J, Kumar D, Meenan B, Dixon D (2011) Polyethylene glycol functionalized gold nanoparticles: the influence of capping density on stability in various media. Gold Bull 44:99–105. doi:10.1007/s13404-011-0015-8
Caruso F, Caruso RA, Mohwald H (1998) Nanoengineering of inorganic and hybrid hollow spheres by colloidal templating. Science 282:1111–1114. doi:10.1126/science.282.5391.1111
Schneider G, Decher G (2008) Functional core/shell nanoparticles via layer-by-layer sssembly. Investigation of the experimental parameters for controlling particle aggregation and for enhancing dispersion stability. Langmuir 24:1778–1789. doi:10.1021/la7021837
Schonhoff M (2003) Self-assembled polyelectrolyte multilayers. Curr Opin Colloid Interface Sci 8:86–95. doi:10.1016/s1359-0294(03)00003-7
Schneider G, Subr V, Ulbrich K, Decher G (2009) Multifunctional cytotoxic stealth nanoparticles. A model approach with potential for cancer therapy. Nano Lett 9:636–642. doi:10.1021/nl802990w
Pereira SO, Barros-Timmons A, Trindade T (2013) Biofunctionalisation of colloidal gold nanoparticles via polyelectrolytes assemblies. Colloid Polym Sci 292:33–50. doi:10.1007/s00396-013-3037-3
Deshmukh PK, Ramani KP, Singh SS, Tekade AR, Chatap VK, Patil GB, Bari SB (2013) Stimuli-sensitive layer-by-layer (LbL) self-assembly systems: targeting and biosensory applications. J Control Release 166:294–306. doi:10.1016/j.jconrel.2012.12.033
Schneider G, Decher G (2004) From functional core/shell nanoparticles prepared via layer-by-layer deposition to empty nanospheres. Nano Lett 4:1833–1839. doi:10.1021/nl0490826
Dulkeith E, Morteani AC, Niedereichholz T, Klar TA, Feldmann J, Levi SA, van Veggel F, Reinhoudt DN, Moller M, Gittins DI (2002) Fluorescence quenching of dye molecules near gold nanoparticles: radiative and nonradiative effects. Phys Rev Lett 89:203002. doi:10.1103/PhysRevLett.89.203002
Gueroui Z, Libchaber A (2004) Single-molecule measurements of gold-quenched quantum dots. Phys Rev Lett 93:1–4. doi:10.1103/PhysRevLett.93.166108
Yun CS, Javier A, Jennings T, Fisher M, Hira S, Peterson S, Hopkins B, Reich NO, Strouse GF (2005) Nanometal surface energy transfer in optical rulers, breaking the FRET barrier. J Am Chem Soc 127:3115–3119. doi:10.1021/ja043940i
Jennings TL, Singh MP, Strouse GF (2006) Fluorescent lifetime quenching near d = 1.5 nm gold nanoparticles: probing NSET validity. J Am Chem Soc 128:5462–5467. doi:10.1021/ja0583665
Sapsford KE, Berti L, Medintz IL (2006) Materials for fluorescence resonance energy transfer analysis: beyond traditional donor-acceptor combinations. Angew Chem Int Ed 45:4562–4588. doi:10.1002/anie.200503873
Schneider G, Decher G, Nerambourg N, Praho R, Werts MHV, Blanchard-Desce M (2006) Distance-dependent fluorescence quenching on gold nanoparticles ensheathed with layer-by-layer assembled polyelectrolytes. Nano Lett 6:530–536. doi:10.1021/nl052441s
Dubertret B, Calame M, Libchaber AJ (2001) Single-mismatch detection using gold-quenched fluorescent oligonucleotides. Nat Biotechnol 19:365–370. doi:10.1038/86762
Maxwell DJ, Taylor JR, Nie SM (2002) Self-assembled nanoparticle probes for recognition and detection of biomolecules. J Am Chem Soc 124:9606–9612. doi:10.1021/ja025814p
Kato N, Caruso F (2005) Homogeneous, competitive fluorescence quenching immunoassay based on gold nanoparticle/polyelectrolyte coated latex particles. J Phys Chem B 109:19604–19612. doi:10.1021/jp052748f
Park S, Lee S, Kim G, Kim Y-P (2012) Gold nanoparticle-based fluorescence quenching via metal coordination for assaying protease activity. Gold Bull 45:213–219. doi:10.1007/s13404-012-0070-9
Aslan K, Perez-Luna VH (2004) Quenched emission of fluorescence by ligand functionalized gold nanoparticles. J Fluoresc 14:401–405. doi:10.1023/B:JOFL.0000031821.74706.ea
Aslan K, Perez-Luna VH (2006) Nonradiative interactions between biotin-functionalized gold nanoparticles and fluorophore-labeled antibiotin. Plasmonics 1:111–119. doi:10.1007/s11468-006-9013-8
Li X, Jiang L, Zhan QQ, Qian J, He SL (2009) Localized surface plasmon resonance (LSPR) of polyelectrolyte-functionalized gold-nanoparticles for bio-sensing. Colloids Surf A 332:172–179. doi:10.1016/j.colsurfa.2008.09.009
Acknowledgments
This work was funded by Fundos FEDER by the Programa Operacional Factores de Competitividade—COMPETE and Fundos Nacionais by FCT—Fundação para a Ciência e Tecnologia in the project CICECO - FCOMP-01-0124-FEDER-037271 (Refª. FCT PEst-C/CTM/LA0011/2013). S. O. Pereira thanks FCT for her PhD grant SFRH/BD/80156/2011.
Author information
Authors and Affiliations
Corresponding author
Electronic supplementary material
Below is the link to the electronic supplementary material.
ESM 1
(DOCX 1789 kb)
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution License which permits any use, distribution, and reproduction in any medium, provided the original author(s) and the source are credited.
About this article
Cite this article
Pereira, S.O., Trindade, T. & Barros-Timmons, A. Biotinylation of optically responsive gold/polyelectrolyte nanostructures. Gold Bull 48, 3–11 (2015). https://doi.org/10.1007/s13404-014-0153-x
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13404-014-0153-x