Abstract
Deforestation remains a major ecological problem in most developing countries especially Pakistan which has a very high deforestation rate. Fuel-wood consumption is a determining socioeconomic factor for deforestation and degradation. Agroforest biomass utilization for energy production is an extreme value socioeconomic incentive towards the reduction in deforestation and degradation in Pakistan. This study was conducted at Basho forest valley Gilgit-Baltistan, Pakistan, in 2019. In this study, dried and milled forest waste (FW) including tree leaves and branches were briquetted (biofuel) to be used as an alternate of wood fuel and determined its physical properties regarding quality of the briquette. The screw extruder briquetting technology was employed. Dried (<15%) forest biomass was briquetted at 4 mold temperatures (225, 250, 275, 300 °C) and grounded biomass sizes (2, 4, 6 mm). The briquette was 100 mm in length with 20 mm diameter. Briquettes were analyzed for physical and thermal characteristics. Results indicated that the mold temperature and biomass particle size have insignificant effect on the fracture resistance and endurance and fracture resistances, respectively. It is determined that the mold temperature and the particle size are markedly effective on examined other briquettes characteristics. The maximum moisture content and density of briquettes was 12% and 1092 kgm−3 respectively. Biomass briquettes showed ≥95% of durability, shatter, moisture, and compressive resistance which ensure sustainable handling. The maximum calorific value and ash content was 4339 kcal/kg and 7.23%, respectively, while the emission of flue gases was below the standard values. The economic and feasibility analysis proved to be a sustainable and profitable study with payback investment time (0.9) year and benefit-cost ratio as 1.39. The utilization of FW would contribute to the elimination of the energy deficit and reduce of control deforestation activities for fuel-wood while contributing to economic growth. Considering the benefits of the FW for environmental conditions, it will be understood that the issue is very comprehensive. Therefore, instead of using forest wood material for fuel, the conversion of FW into alternate energy source would be an economic and environmental positive behavior.
Similar content being viewed by others
References
Keenan RJ, Reams GA, Achard F, de Freitas JV, Grainger A, Lindquist E (2015) Dynamics of global forest area: results from the FAO global forest resources assessment. For Ecol Manag 352:9–20
Qamer FM, Shehzad K, Abbas S, Murthy MSR, Xi C, Gilani H, Bajracharya B (2016) Mapping deforestation and forest degradation patterns in western Himalaya, Pakistan. Remote Sens 8(5):385
Ullah S, Gang T, Rauf T, Sikandar F, Liu JQ, Noor RS (2020, 2020) Identifying the socio-economic factors of deforestation and degradation: a case study in Gilgit Baltistan, Pakistan. Geo J. https://doi.org/10.1007/s10708-020-10332-y
Sharma NP (1994) A strategy for the forest sector in sub-Saharan Africa. World Bank Publications Vol 23
Chakravarty S et al (2012) Deforestation: causes, effects and control strategies, in Global perspectives on sustainable forest management. Intech Open
Ali J, Benjaminsen TA (2004) Fuelwood, timber and deforestation in the Himalayas. Mt Res Dev 24(4):312–318
Benjaminsen TA (1993) Fuelwood and desertification: Sahel orthodoxies discussed on the basis of field data from the Gourma region in Mali. Geoforum 24(4):397–409
Çolakoglu B (2018) Tarımsal Atıkların Alternatif Kullanım Alanları Konusunda Üretici Eğilimleri. Namık Kemal Üniversitesi Fen Bilimleri Enstitüsü Yüksek Lisans Tezi, Tekirdag
Espinoza-Tellez T, Montes JB, Quevedo-León R, Valencia-Aguilar E, Vargas HA, Díaz-Guineo D, Ibarra-Garnica M, Díaz-Carrasco S (2020) Agricultural, forestry, textile and food waste used in the manufacture of biomass briquettes: a review. Scientia Agropecuaria 11(3):427–437
Sarakikya H, Kirobo A (2018) Opportunities for different agricultural and forest wastes as sources of energy in Tanzania: an overview. International Journal of Scientific Research Engineering & Technology (IJSRET) 7(2):2278–0882
Chen H (2015) Lignocellulose biorefinery product engineering. In: Publishing Woodhead (ed) Lignocellulose biorefinery engineering, 1st. Limited, Cambridge, UK, pp 125–165
Trubetskaya A, Leahy JJ, Yazhenskikh E, Müller M, Layden P, Johnson R, Ståhl K, Monaghan RFD (2019) Characterization of woodstove briquettes from torrefied biomass and coal. Energy 171:853–865
Christoforou E, Fokaides PA (2019) Advances in solid biofuels. Green energy and technology; Springer: Cham, Switzerland 1–130
Andri’c I, Jamali-Zghal N, Santarelli M, Lacarrière B, Le Corre O (2015) Environmental performance assessment of retrofitting existing coal fired power plants to co-firing with biomass: carbon footprint and emergy approach. J Clean Prod 103:13–27
Christoforou E, Fokaides PA (2016) A review of olive mill solid wastes to energy utilization techniques. Waste Manag 49:346–363
Mitchual SJ, Katamani P, Afrifa KA (2019) Fuel characteristics of binder free briquettes made at room temperature from blends of oil palm mesocarp fibre and Ceiba pentandra. Biomass Convers Biorefinery 9:541–551
Hasan L (2007) An anatomy of state failures in forest management in Pakistan. The Pakistan Development Review: p.1189–1203, 46
Yusuf M (2009) Legal and institutional dynamics of forest management in Pakistan. McGill Int'l J Sust Dev L & Pol'y 5(45)
Emerton L (2000) Using economic incentives for biodiversity conservation, economics and biodiversity programme. World Conservation Union, Switzerland, p 299
Kazim M et al (2015) Biodiversity of spiders (Arachnida: Araneae) fauna of Gilgit Baltistan Pakistan. International Journal of Fauna and Biological Studies 2(4):77–79
Akbar M et al (2011) Quantitative forests description from Skardu, Gilgit and Astore districts of Gilgit-Baltistan, Pakistan. FUUAST Journal of Biology 1(2):149–160
Hamid MF, Idroas MY, Ishak MZ, Zainal Alauddin ZA, Miskam MA, Abdullah MK (2016) An experimental study of briquetting process of torrefied rubber seed kernel and palm oil shell. Biomed Res Int 1–11
Sen R, Wiwatpanyaporn S, Annachhatre AP (2016) Influence of binders on physical properties of fuel briquettes produced from cassava rhizome waste. Int J Environ Waste Manag 17:158–175
Noor RS, F Hussain, I Abbas, M Umair, Yong S (2020) Effect of compost and chemical fertilizer application on soil physical properties and productivity of sesame (Sesamum Indicum L.). Biomass Conv Bioref https://doi.org/10.1007/s13399-020-01066-5, 2020
Solano D, Vinyes P, Arranz P (2016) Biomass briquetting process. UNDP-CEDRO Publication, Beirut, Lebanon
Grover PD, Mishra SK (1996) Biomass briquetting: technology and practices. Regional Wood Energy Development Programme In Asia; Field Document No 46; Food and Agriculture Organization: Rome, Italy
Oladeji J (2015) Theoretical aspects of biomass briquetting: a review study. J Energy Technol Policy 5:72–82
Bajwa DS, Peterson T, Sharma N, Shojaeiarani J, Bajwa SG (2018) A review of densified solid biomass for energy production. Renew Sust Energ Rev 96:296–305
Purohit P, Chaturvedi V (2016) Techno-economic assessment of biomass pellets for power generation in India. New Delhi, India, CEEW
Mani S, Tabil LG, Sokhansanj S (2004) Grinding performance and physical properties of wheat and barley straws, corn stover and switchgrass. Biomass Bioenergy 27:339–352
Tumuluru SJ, Christopher WT, Kenny KL, Hess JR (2010) A review on biomass densification technologies for energy application; Idaho National Laboratory: Idaho Falls. ID, USA
Pradhan P, Mahajani SM, Arora A (2018) Production and utilization of fuel pellets from biomass: a review. Fuel Process Technol 181:215–232
Tumuluru JS, Heikkila DJ (2019) Biomass grinding process optimization using response surface methodology and a hybrid genetic algorithm. Bioengineering 6(12)
Asamoah B, Nikiema J, Gebrezgabher S, Odonkor E, Njenga M (2016) A review on production, marketing and use of fuel briquettes
Antwi-Boasiako C, Acheampong BB (2016) Strength properties and calorific values of sawdust-briquettes as wood-residue energy generation source from tropical hardwoods of different densities. Biomass Bioenergy 85:144–152
Moreno AI, Font R, Conesa JA (2016) Physical and chemical evaluation of furniture waste briquettes. Waste Manag 49:245–252
Onukak I, Mohammed-Dabo I, Ameh A (2017) Okoduwa, S.; Fasanya, O. Production and characterization of biomass briquettes from tannery solid waste. Recycling 2: 17
Mendoza-Martinez CL, Sermyagina E, Carneiro OADC, Vakkilainen E, Cardoso M (2019) Production and characterization of coffee-pine wood residue briquettes as an alternative fuel for local firing systems in Brazil. Biomass Bioenergy 123:70–77
Ujjinappa S, Sreepathi LK (2018) Production and quality testing of fuel briquettes made from pongamia and tamarind shell. Sadhana 43:1–7
Garrido MA, Conesa JA, Garcia MD (2017) Characterization and production of fuel briquettes made from biomass and plastic wastes. Energies 10:1–12
Sotannde OA, Oluyege AO, Abah GB (2010) Physical and combustion properties of briquettes from sawdust of Azadirachta indica. J Res 21:63–67
ISO 17225-3. Solid biofuels—fuel specifications and classes—Part. 3: Graded wood briquettes; ISO: Geneva, Switzerland, 2014
ISO 17225-7. Solid biofuels—fuel specifications and classes—Part. 7: Graded non-woody briquettes; ISO: Geneva, Switzerland, 2014
ASTM D2444-16. Standard test. Methods for direct moisture content measurement of wood and wood-based materials; ASTM International: West Conshohocken, PA, USA, 2016
ISO 18134-2, 2017. Solid biofuels—determination of moisture content—oven dry method—Part. 2: Total moisture—simplified method; ISO: Geneva, Switzerland, 2017
ASTM D3174-12. Standard test. Method for ash in the analysis sample of coal and coke from coal; ASTM International: West Conshohocken, PA, USA, 2012
ISO 18122, (2015) Solid biofuels—determination of ash content. Geneva, Switzerland, ISO, p 2015
Richards SR (1990) Physical testing of fuel briquettes. Fuel Process Technol 25:89–100
ISO 17831–2, (2015) Solid biofuels—determination of mechanical durability of pellets and briquettes. Geneva, Switzerland, ISO, p 2015
Borowski G, Stepniewski W, Wójcik-Oliveira K (2017) Effect of starch binder on charcoal briquette properties. Int Agrophysics 31:571–574
ASTM D440-86. Standard test. Method of drop shatter test. For coal; ASTM International: West Conshohocken, PA, USA, 2002
ISO 616 (1995) Coke—determination of shatter indices. Geneva, Switzerland, ISO, p 1995
ASTM D870-15. Standard practice for testing water resistance of coatings using water immersion; ASTM International: West Conshohocken, PA, USA, 2010
ASTM D2166-85. Standard test. Method of compressive strength of wood; ASTM International: West Conshohocken, PA, USA, 2008
ASTM (2017) D2395-17. Standard test. Methods for density and specific gravity (relative density) of wood and wood-based materials. ASTM International, West Conshohocken, PA, USA
ISO 18847 (2016) Solid biofuels—determination of particle density of pellets and briquettes. Geneva, Switzerland, ISO, p 2016
ASTM D5865-13. Standard test. Method for gross calorific value of coal and coke; ASTM International: West Conshohocken, PA, USA, 2013
ISO 18125 (2017) Solid biofuels—determination of calorific value. Geneva, Switzerland, ISO, p 2017
DIN51731. Testing of solid fuels—compressed untreated wood—requirements and testing. German Institute for Standardisation; Deutsches Institut für Normung: Berlin, Germany, 1996
ASTM D3176-15. Standard practice for ultimate analysis of coal and coke; ASTM International: West Conshohocken, PA, USA, 2015
ISO 16948, 2015. Solid biofuels—determination of total content of carbon, hydrogen and nitrogen; ISO: Geneva, Switzerland, 2015
ISO 16994 (2015) Solid biofuels—determination of total content of sulfur and chlorine. Geneva, Switzerland, ISO, p 2015
El-Haggar SM (2007) Sustainability of agricultural and rural waste management. In Sustainable industrial design and waste management; Elsevier: Amsterdam, The Netherlands; pp. 223–260
Gilvari H, de Jong W, Schott DL (2019) Quality parameters relevant for densification of bio-materials: measuring methods and affecting factors—a review. Biomass Bioenergy 120:117–134
Stolarski MJ, Szczukowski S, Tworkowski J, Krzyzaniak M, Gulczy ´nski P, Mleczek M, (2013) Comparison of quality and production cost of briquettes made from agricultural and forest origin biomass. Renew Energy 57:20–26
Onchieku JM (2018) Cost benefit analysis of making charcoal briquettes using screw press machine locally designed and fabricated. Int Adv Res J Sci Eng Technol 5:57–65
Abbas I, Liu J, Noor RS, Faheem M, Farhan M, Ameen M, Shaikh SA (2020) Development and performance evaluation of small size household portable biogas plant for domestic use. Biomass Conversion and Biorefinery:1–13
Anna B, Roubík H, Brožek M, Herák D, Šleger V, Mazancová J (2019) Potential of tropical fruit waste biomass for production of bio-briquette fuel: using Indonesia as an example
Nazari MM, Wan Othman WNA, Yusuff KM (2019) Banana residue as biomass briquette: an alternative of fuel energy. The 7th International Conference on Sustainable Agriculture for Food, Energy and Industry in Regional and Global Context, ICSAFEI2015 erişim:18.07.2019
Komlajeva L, Adamovičs A, Poiša L (2019) Comparıson of dıfferent energy crops for solıd fuel productıon in Latvıa. Latvia University of Agriculture. Lubasha_k@inbox.lv; Aleksandrs.Adamovics@llu.lv; lienapoisa@inbox.Erişim:18.07.2019
Brunerová A, Roubík H, Brožek M, Velebil J (2018) Agricultural residues in Indonesia and Vietnam and their potential for direct combustion: with a focus on fruit processing and plantation crops. Agronomy Research, https://doi.org/10.15159/AR.18.113
Thulu FGD, Kachaje O, Mlowa T (2016) A study of combustion characteristics of fuel briquettes from a blend of banana peelings and saw dust in Malawi. International Journal of Thesis Projects and Dissertations 4(3):135–158
Dok M, Acar M, Çelik AE, Atagün G, Akbaş U (2018) Şeftali Budama Artıklarından Yenilenebilir Enerji Kaynağı Olarak Yararlanma İmkânlarının Araştırılması. Tarım Makinaları Bilimi Dergisi 14(3):193–198
Maninder R, Kathuria S, Grover S (2012) Using agricultural residues as a biomass briquetting: an alternative source of energy. IOSR Journal of Electrical and Electronics Engineering (IOSRJEEE), ISSN: 2278-1676 Volume 1, Issue 5 (July-Aug. 2012), PP. 11–15
Walekhwa PN, Lars D, Mugisha J (2014) Economic viability of biogas energy production from family-sized digesters in Uganda. Biomass Bioenergy 70:26–39
Sengar SH, Patil SSA, Chendake D (2013) Economic feasibility of briquetted fuel. Glob J Res Eng Chem Eng 13:21–26
Jean de Dieu KH, Kim HT (2016) Peat briquette as an alternative to cooking fuel: a techno-economic viability assessment in Rwanda. Energy 102:453–464
Feng C, Yu X, Tan H, Liu T, Hu T, Zhang Z (2013) The economic feasibility of a crop-residue densification plant: a case study for the city of Jinzhou in China. Renew Sust Energ Rev 24:172–180
Hu J, Lei T, Wang Z, Yan X, Shi X, Li Z (2014) Economic, environmental and social assessment of briquette fuel from agricultural residues in China—a study on flat die briquetting using corn stalk. Energy 64:557–566
Rattanongphisat W, Chindaruksa S (2011) A bio-fuel briquette from durian peel and rice straw: properties and economic feasibility. Nu Sci J 8:1–11
Felfli FF, Mesa PJM, Rocha JD, Filippetto D, Luengo CA (2011) Pippo, W.A. Biomass briquetting and its perspectives in Brazil. Biomass Bioenergy 35:236–242
Acknowledgements
The authors are thankful and acknowledged the Northeast Forestry University, Harbin, China, for their technical scientific support.
Author information
Authors and Affiliations
Contributions
Saifullah conceived the conceptualization of research study, design and development of the experiment, data collection, formal analysis, investigation, methodology, visualization, writing an original draft, reviewed, supervised, and write-up editing. Rana Shahzad Noor participated in data collection, formal analysis, investigation, methodology, visualization, writing an original draft, reviewed, and write-up editing. Sanaullah contributed in data collection. Tian Gang supervised the entire research work and contributed as internal reviewer for the manuscript.
Corresponding author
Ethics declarations
Conflict of interest
The authors declare no competing interests.
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Ullah, S., Noor, R.S., Sanaullah et al. Analysis of biofuel (briquette) production from forest biomass: a socioeconomic incentive towards deforestation. Biomass Conv. Bioref. 13, 1–15 (2023). https://doi.org/10.1007/s13399-021-01311-5
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13399-021-01311-5