Abstract
In order to ensure the testing range and long-term reliability of the fiber Bragg grating (FBG) used for the smart cable, a smart cable embedded with FBG strain sensors based on the desensitized encapsulation structure was designed. For a smart cable specimen, the fatigue loading experiments with the cycle from 100 thousands to 2 million and 0.95 times nominal breaking cable force (P b ) were carried out, which tested the long-serving effects of the smart cable. The test results of the static tension loading and unloading during the stepwise fatigue cycle process showed that the encapsulated FBG strain sensors had the good linearity and repeatability. Also all sensors survived after 2 million times fatigue cycle. 0.95P b static tension test showed that the encapsulated FBG strain sensors embedded inside the cable reached 4.5% testing accuracy in the 0.86P b working range. After 0.95P b static tension test, the dissection test was carried out by breaking the force tension. The results showed that the appearances of the encapsulated sensors were good, and the design structures were not changed and damaged.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
T. Wang, Z. Yuan, Y. Gong, Y. Wu, Y. Rao, L. Wei, et al., “Fiber Bragg grating strain sensors for marine engineering,” Photonic Sensors, 2013, 3(3): 267–271.
J. Wang, T. Liu, G. Song, H. Xie, L. Li, X. Deng, et al., “Fiber Bragg grating (FBG) sensors used in coal mines,” Photonic Sensors, 2014, 2(4): 120–124.
T. Li, C. Li, and H. Liu, “Stress measurement at cable and anchor end by using fiber Bragg grating,” China Journal of Highway and Transport, 2012, 25(5): 134–138.
J. Wu, W. Chen, P. Zhang, L. Liu, and L. Liu, “Smart cable technology based on fiber Bragg grating strain sensing in cable anchorage zone,” Chinese Journal of Lasers, 2010, 37(6): 1510–1515.
Z. Zhou, Z. Zhang, N. Deng, X. Zhao, and D. Li, “Application of FRP-OFBG sensors on bridge cables,” in Proc. SPIE (Smart Structures & Material/NDE Joint Conference: Sensors and Smart Structures for Civil, Mechanical and Aerospace System), vol. 5765, pp. 668–677, 2005.
Z. Zhou, J. He, H. Jia, and J. Ou, “Full scale Brillouin sensing technique based smart parallel wire stay cable,” Journal of Optoelectronics Laser, 2009, 20(6): 766–770.
S. LI and D. Jiang, “Structural large strain monitoring based on FBG sensor,” in Symposium on Photonics and Optoelectronics (SOPO2009), Wuhan, China, August 14–16, 2009.
T. Liu, J. Jiang, and X. Li, “Application of fiber Bragg grating sensor on measurement of tensile stress in a seven-wire prestressed steel strand,” Journal of Optoelectronics· Laser, 2005, 16(10): 1235–1238.
Chongqing communications research & design institute, Technical conditions for hot-extruding PE protection high strength wire cable of cable-stayed bridge (GBT18365-2001). Beijing: China Standards Press, 2001.
Author information
Authors and Affiliations
Corresponding author
Additional information
This article is published with open access at Springerlink.com
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (https://creativecommons.org/licenses/by/4.0), which permits use, duplication, adaptation, distribution, and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
About this article
Cite this article
Li, S., Zhou, M. Long-term mechanical properties of smart cable based on FBG desensitized encapsulation sensors. Photonic Sens 4, 236–241 (2014). https://doi.org/10.1007/s13320-014-0191-2
Received:
Revised:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13320-014-0191-2