Abstract
Spalling is one common defect generally observed in railway wheels. The spalling phenomenon usually starts from the white etching layer (WEL) of the wheel due to cyclic loading. So far, the research work has not been systematically done on how the crack orientation influences the spalling behaviour. In our current study, the fatigue behaviours of the wheel steel with a surface crack under cyclic loading are investigated using extended finite element method. The significant parameters affecting the spalling behaviours such as the crack orientation and loadings are studied. Two key indices are used: the number of cycles required for the crack to reach the interface between the WEL and wheel steel material, and the crack propagation rate. The fatigue propagation trend in the WEL is validated by relevant experimental studies. Moreover, it is concluded from our results that a crack vertical to the surface has a greater propagation rate compared to other crack orientations.
Similar content being viewed by others
References
ABAQUS. (2014). ABAQUS Version 6.14. User subroutines reference manual. Dassault Systémes Simulia Corp., Providence, RI.
Alfredsson, B., Dahlberg, J., & Olsson, M. (2008). The role of a single surface asperity in rolling contact fatigue. Wear,264, 757–762. https://doi.org/10.1016/j.wear.2006.11.055.
Belytschko, T., Fish, J., & Engelmann, B. E. (1988). A finite element with embedded localization zones. Computer Methods in Applied Mechanics and Engineering,70, 59–89. https://doi.org/10.1016/0045-7825(88)90180-6.
Ekberg, A., Åkesson, B., & Kabo, E. (2014). Wheel/rail rolling contact fatigue—Probe, predict, prevent. Wear,314, 2–12. https://doi.org/10.1016/j.wear.2013.12.004.
El-sayed, H., Lotfy, M., El-din Zohny, H., & Riad, H. (2018). Prediction of fatigue crack initiation life in railheads using finite element analysis. Ain Shams Engineering Journal,9, 2329–2342. https://doi.org/10.1016/j.asej.2017.06.003.
Hannes, D., & Alfredsson, B. (2012). Surface initiated rolling contact fatigue based on the asperity point load mechanism—A parameter study. Wear,294–295, 457–468. https://doi.org/10.1016/j.wear.2012.07.005.
Hillerborg, A., Modéer, M., & Petersson, P. E. (1976). Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements. Cement and Concrete Research,6, 773–781. https://doi.org/10.1016/0008-8846(76)90007-7.
Jaśkowiec, J., & van der Meer, F. P. (2014). A consistent iterative scheme for 2D and 3D cohesive crack analysis in XFEM. Computers & Structures,136, 98–107. https://doi.org/10.1016/j.compstruc.2014.01.029.
Kato, T., Sugeta, A., & Nakayama, E. (2011). Investigation of influence of white layer geometry on spalling property in railway wheel steel. Wear,271, 400–407. https://doi.org/10.1016/j.wear.2010.10.024.
Li, H., Yuan, H., & Li, X. (2015). Assessment of low cycle fatigue crack growth under mixed-mode loading conditions by using a cohesive zone model. International Journal of Fatigue,75, 39–50. https://doi.org/10.1016/j.ijfatigue.2015.01.008.
Liu, Y., Stratman, B., & Mahadevan, S. (2006). Fatigue crack initiation life prediction of railroad wheels. International Journal of Fatigue,28, 747–756. https://doi.org/10.1016/j.ijfatigue.2005.09.007.
Mai, S. H., Gravouil, A., & Nguyen-Tajan, M. L. (2017). Numerical simulation of rolling contact fatigue crack growth in rails with the rail bending and the frictional contact. Engineering Fracture Mechanics,174, 196–206.
Needleman, A. (1987). A continuum model for void nucleation by inclusion debonding. Journal of Applied Mechanics Transactions ASME,54, 525–531. https://doi.org/10.1115/1.3173064.
Needleman, A. (1990). An analysis of tensile decohesion along an interface. Journal of the Mechanics and Physics of Solids,38, 289–324. https://doi.org/10.1016/0022-5096(90)90001-K.
Peixoto, D. F. C., & Castro, P M S Td. (2016). Mixed mode fatigue crack propagation in a railway wheel steel. Procedia Structure Integrity,1, 150–157.
Simulia. (2012). Modelling fracture and failure with ABAQUS 612. Vélizy-Villacoublay: Dassault Systemes.
Sutula, D., Kerfriden, P., van Dam, T., & Bordas, S. P. A. (2018). Minimum energy multiple crack propagation. Part III: XFEM computer implementation and applications. Engineering Fracture Mechanics,191, 257–276. https://doi.org/10.1016/j.engfracmech.2017.08.004.
Wan, L. B., Li, S. X., Lu, S. Y., Su, Y. S., Shu, X. D., & Huang, H. B. (2018). Case study: Formation of white etching layers in a failed rolling element bearing race. Wear,396–397, 126–134. https://doi.org/10.1016/j.wear.2017.07.014.
Wang, Y. J., & Ru, C. Q. (2016). Determination of two key parameters of a cohesive zone model for pipeline steels based on uniaxial stress–strain curve. Engineering Fracture Mechanics,163, 55–65. https://doi.org/10.1016/j.engfracmech.2016.06.017.
Xu, Y., Li, X., Wang, X., & Liang, L. (2014). Inverse parameter identification of cohesive zone model for simulating mixed-mode crack propagation. International Journal of Solids and Structures,51, 2400–2410. https://doi.org/10.1016/j.ijsolstr.2014.03.008.
Xu, Y., & Yuan, H. (2011). Applications of normal stress dominated cohesive zone models for mixed-mode crack simulation based on extended finite element methods. Engineering Fracture Mechanics,78, 544–558. https://doi.org/10.1016/j.engfracmech.2010.03.029.
Zeng, D., Lu, L., Gong, Y., Zhang, Y., & Zhang, J. (2017). Influence of solid solution strengthening on spalling behavior of railway wheel steel. Wear,372–373, 158–168. https://doi.org/10.1016/j.wear.2016.12.025.
Zhang, Y. M., Fan, M., Xiao, Z. M., & Zhang, W. G. (2016). Fatigue analysis on offshore pipelines with embedded cracks. Ocean Engineering,117, 45–56. https://doi.org/10.1016/j.oceaneng.2016.03.038.
Zhou, Y., Peng, J. F., Luo, Z. P., Cao, B. B., Jin, X. S., & Zhu, M. H. (2016a). Phase and microstructural evolution in white etching layer of a pearlitic steel during rolling–sliding friction. Wear,362–363, 8–17. https://doi.org/10.1016/j.wear.2016.05.007.
Zhou, Y., Peng, J. F., Wang, W. J., Jin, X. S., & Zhu, M. H. (2016b). Slippage effect on rolling contact wear and damage behavior of pearlitic steels. Wear,362–363, 78–86. https://doi.org/10.1016/j.wear.2016.05.001.
Zhu, X. (2012). Tutorial on Hertz contact stress, OPTI 521: 1 Dec 2012.
Acknowledgements
The authors acknowledge the support of Singapore A*STAR SERC AME Programmatic Fund for the “Structural Metal Alloys Programme” (Project WBS M4070307.051).
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Zhang, Y.M., Xiao, Z.M. & Fan, M. Fatigue Investigation on Railway Wheel Steel with White Etching Layer. Int J Steel Struct 20, 80–88 (2020). https://doi.org/10.1007/s13296-019-00271-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13296-019-00271-x