Abstract
The orientation of the fault is significant for interpreting the stress and energy fields of fault pillars and explaining the occurrence of rockburst. However, current risk assessment methods for rockburst do not fully consider the role that fault orientation plays in varying the risk level of working faces. In this paper, we explore the effect of the fault dip angle (θ), fault strike (φ), the width of the fault zone (d), and the distance between the working face and the fault (l) on the temporal and spatial evolution of stress and elastic energy. We determine the weight index of fault orientation on the risk of the working face using the AHP method. Then, we build a quantitative evaluation model to perform risk assessment and evaluation of the fault pillar instability in coal mines. The results show that when the fault dip angle is 75°, the fault strike is 50°, and the fault zone width is 6 m, the risk level of the 5366 working face of Hengda coal mine is the highest. Finally, we apply the evaluation method to Dongtan coal mine, Qianqiu coal mine, and others for verification. The study achievements can supply theoretical support for revealing the stress and energy fields, risk assessment in the fault mining area, and research on the evolutional mechanism of fault slip burst.
Similar content being viewed by others
References
Achu AL, Thomas J, Reghunath R (2020) Multi-criteria decision analysis for delineation of groundwater potential zones in a tropical river basin using remote sensing, GIS and analytical hierarchy process (AHP). Groundw Sustain Dev 10:100365. https://doi.org/10.1016/j.gsd.2020.100365
Andric P, Yin B, Curtin WA (2019) Stress-dependence of generalized stacking fault energies. J Mech Phys Solids 122:262–279. https://doi.org/10.1016/j.jmps.2018.09.007
Bedford JD, Faulkner DR, Lapusta N (2022) Fault rock heterogeneity can produce fault weakness and reduce fault stability. Nat Commun 13:326. https://doi.org/10.1038/s41467-022-27998-2
Bertuzzi R, Douglas K, Mostyn G (2016) An approach to model the strength of coal pillars. Int J Rock Mech Min Sci 89:165–175. https://doi.org/10.1016/j.ijrmms.2016.09.003
Cao A, Liu Y, Jiang S et al (2021) Numerical investigation on influence of two combined faults and its structure features on rock burst mechanism. Minerals 11:1438. https://doi.org/10.3390/min11121438
Chen X, Lv P, Song W, Deng C (2016) Hazard analysis and prevention technology of rockburst through fault in fully mechanized caving mining. Chin J Saf Sci 26(05):81–87
Chen F, Cao A, Dou L, Jing G (2019) A quantitative evaluation method of coal burst hazard based on zone division and an analytic hierarchy process: a case study on Yanbei coal mine, Gansu Province, China. Geosci J 23:833–848. https://doi.org/10.1007/s12303-018-0081-5
Ding Z, Feng X, Wang E, Sa L, Wang D, Zhang Q, Hu Q, Zhao X (2023a) Fracture response and damage evolution features of coal considering the effect of creep damage under dynamic loading. Eng Fail Anal 148:107204. https://doi.org/10.1016/j.engfailanal.2023.107204
Ding Z, Feng X, Wang E, Wei Q, Zhao X, Hu Q (2023b) Acoustic emission response and evolution of precracked coal in the meta-instability stage under graded loading. Eng Geol 312:106930. https://doi.org/10.1016/j.enggeo.2022.106930
Dos Santos PH, Neves SM, Sant’Anna DO et al (2019) The analytic hierarchy process supporting decision making for sustainable development: an overview of applications. J Clean Prod 212:119–138. https://doi.org/10.1016/j.jclepro.2018.11.270
Gao F, Kang H, Li J (2021) Numerical simulation of fault-slip rockbursts using the distinct element method. Tunn Undergr Space Technol 110:103805. https://doi.org/10.1016/j.tust.2020.103805
Han Y, Zhou R, Geng Z et al (2020) A novel data envelopment analysis cross-model integrating interpretative structural model and analytic hierarchy process for energy efficiency evaluation and optimization modeling: application to ethylene industries. J Clean Prod 246:118965. https://doi.org/10.1016/j.jclepro.2019.118965
Ji Y, Wu W, Zhao Z (2019) Unloading-induced rock fracture activation and maximum seismic moment prediction. Eng Geol 262:105352. https://doi.org/10.1016/j.enggeo.2019.105352
Jiang F, Wei Q, Wang C, Yao S, Zhang Y, Han R et al (2014) Mechanism analysis of rock burst in ultra-thick coal seam controlled by thick conglomerate and thrust fault. Coal Journal 39(07):1191–1196
Jiao Z, Yuan Q, Zou P, Shi B (2021) Case study of the characteristics and mechanism of rock burst near fault in Yima Coalfield China. Shock Vib 2021:9950273. https://doi.org/10.1155/2021/9950273
Jin K, Kim Y-S (2021) The importance of surface ruptures and fault damage zones in earthquake hazard assessment: a review and new suggestions. Geol Soc, Lond Spec Publ 501:205–224. https://doi.org/10.1144/SP501-2019-98
Kansara S, Modgil S, Kumar R (2022) Structural transformation of fuzzy analytical hierarchy process: a relevant case for COVID-19. Oper Manag Res. https://doi.org/10.1007/s12063-022-00270-y
Keneti A, Sainsbury B-A, Dargaville R (2021) Consideration of strain-bursting phenomena associated with large-scale discontinuities: a numerical study. Pure Appl Geophys 178:3581–3600. https://doi.org/10.1007/s00024-021-02851-7
Li CC, Mikula P, Simser B et al (2019) Discussions on rockburst and dynamic ground support in deep mines. J Rock Mech Geotech Eng 11:1110–1118. https://doi.org/10.1016/j.jrmge.2019.06.001
Li H, Lin C, Ren L et al (2020) An Integrated quantitative modeling approach for fault-related fractures in tight sandstone reservoirs. J Petrol Sci Eng 194:107552. https://doi.org/10.1016/j.petrol.2020.107552
Li Z, Meng X, Liu D et al (2022) Disaster risk evaluation of superlong highways tunnel based on the cloud and AHP model. Adv Civ Eng 2022:e8785030. https://doi.org/10.1155/2022/8785030
Liu D, Wang D (2014) Safe mining technology for crossing faults and coal pillars in fully mechanized mining face in deep wells. Energy Technol Manag 39(01):69–71
Lu C, Liu Y, Zhang N et al (2018) In-situ and experimental investigations of rockburst precursor and prevention induced by fault slip. Int J Rock Mech Min Sci 108:86–95. https://doi.org/10.1016/j.ijrmms.2018.06.002
Luo H, Li Z, Wang A, Xiao Y (2014) Study on the evolution law of stress field when approaching fault in deep mining. J China Coal Soc 39:322–327
Manouchehrian A, Cai M (2018) Numerical modeling of rockburst near fault zones in deep tunnels. Tunn Undergr Space Technol 80:164–180. https://doi.org/10.1016/j.tust.2018.06.015
Meng G, Ye Y, Wu B et al (2021) Risk assessment of shield tunnel construction in karst strata based on fuzzy analytic hierarchy process and cloud model. Shock Vib 2021:e7237136. https://doi.org/10.1155/2021/7237136
Pengfei L, Xinyang B, Gang L, Xuehua C (2020) Research on fault activation law in deep mining face and mechanism of rockburst induced by fault activation. Adv Civ Eng 2020:8854467. https://doi.org/10.1155/2020/8854467
Rehman A, Shekhovtsov A, Rehman N et al (2021) On the analytic hierarchy process structure in group decision-making using incomplete fuzzy information with applications. Symmetry 13:609. https://doi.org/10.3390/sym13040609
Sainoki A, Mitri HS (2014) Dynamic behaviour of mining-induced fault slip. Int J Rock Mech Min Sci 66:19–29. https://doi.org/10.1016/j.ijrmms.2013.12.003
Sainoki A, Mitri HS (2018) Quantitative analysis with plastic strain indicators to estimate damage induced by fault-slip. J Rock Mech Geotech Eng 10:1–10. https://doi.org/10.1016/j.jrmge.2017.06.001
Sainoki A, Schwartzkopff A, Mitri HS (2019) Burst-prone stress conditions from tectonics within a fracture network from a fault damage zone
Sepehri M, Apel DB, Adeeb S et al (2020) Evaluation of mining-induced energy and rockburst prediction at a diamond mine in Canada using a full 3D elastoplastic finite element model. Eng Geol 266:105457. https://doi.org/10.1016/j.enggeo.2019.105457
Song C, Lu C, Zhang X et al (2022) Moment tensor inversion and stress evolution of coal pillar failure mechanism. Rock Mech Rock Eng 55:2371–2383. https://doi.org/10.1007/s00603-022-02783-1
Stacey TR, Hadjigeorgiou J (2022) Quantified value-created process (QVP)—a value-based process for mine design and operating decisions. J South Afr Inst Min Metal 122:73–82. https://doi.org/10.17159/2411-9717/1691/2022
Tian J, Chen D, Liu Z, Sun W (2022) Microseismic dynamic response and multi-source warning during rockburst monitoring based on weight decision analysis. Int J Environ Res Public Health 19:15698. https://doi.org/10.3390/ijerph192315698
Ullah B, Kamran M, Rui Y (2022) Predictive modeling of short-term rockburst for the stability of subsurface structures using machine learning approaches: t-SNE K-means clustering and XGBoost. Mathematics 10:449. https://doi.org/10.3390/math10030449
Wang Z, Li L (2019) Study of energy release in failure of coal and rock near fault on ANSYS. Geotech Geol Eng 37:2577–2589. https://doi.org/10.1007/s10706-018-00779-9
Wang X, Li S, Xu Z et al (2019) An interval fuzzy comprehensive assessment method for rock burst in underground caverns and its engineering application. Bull Eng Geol Env 78:5161–5176. https://doi.org/10.1007/s10064-018-01453-3
Wang R, Bai J, Yan S et al (2021) Structure partition and reasonable width determination of waterproof coal pillar in strip mining. Lithosphere 2021:3339797. https://doi.org/10.2113/2021/3339797
Wei C, Zhang C, Canbulat I, Huang W (2021) Numerical investigation into impacts of major fault on coal burst in longwall mining—a case study. Int J Rock Mech Min Sci 147:104907. https://doi.org/10.1016/j.ijrmms.2021.104907
Wojtecki L, Konicek P, Mendecki MJ, Zuberek WM (2022) Evaluation of destress blasting effectiveness using the seismic moment tensor inversion and seismic effect methods. Int J Geomech 22:04022010. https://doi.org/10.1061/(ASCE)GM.1943-5622.0002314
Wu Q, Kong P, Wu Q et al (2020) Study on overburden rock movement and stress distribution characteristics under the influence of a normal fault. Adv Civ Eng 2020:e7859148. https://doi.org/10.1155/2020/7859148
Xiang Y, Sun X, Gao X (2019) Different coseismic groundwater level changes in two adjacent wells in a fault-intersected aquifer system. J Hydrol 578:124123. https://doi.org/10.1016/j.jhydrol.2019.124123
Zhang L, Zhang X, Wu J et al (2020a) Rockburst prediction model based on comprehensive weight and extension methods and its engineering application. Bull Eng Geol Env 79:4891–4903. https://doi.org/10.1007/s10064-020-01861-4
Zhang Q, Wang E, Feng X et al (2020b) Rockburst risk analysis during high-hard roof breaking in deep mines. Nat Resour Res 29:4085–4101. https://doi.org/10.1007/s11053-020-09664-w
Zhang Z, Deng M, Wang X et al (2020c) Field and numerical investigations on the lower coal seam entry failure analysis under the remnant pillar. Eng Fail Anal 115:104638. https://doi.org/10.1016/j.engfailanal.2020.104638
Zhang Q, Wang E, Feng X et al (2021a) Assessment of rockburst risk in deep mining: an improved comprehensive index method. Nat Resour Res 30:1817–1834. https://doi.org/10.1007/s11053-020-09795-0
Zhang S, Lu L, Wang Z, Wang S (2021b) A physical model study of surrounding rock failure near a fault under the influence of footwall coal mining. Int J Coal Sci Technol 8:626–640. https://doi.org/10.1007/s40789-020-00380-7
Zhang W, Feng X-T, Yao Z-B et al (2022) Development and occurrence mechanisms of fault-slip rockburst in a deep tunnel excavated by drilling and blasting: a case study. Rock Mech Rock Eng 55:5599–5618. https://doi.org/10.1007/s00603-022-02927-3
Zhao Y, Wang H, Liu S et al (2018) Dynamic failure risk of coal pillar formed by irregular shape longwall face: a case study. Int J Min Sci Technol 28:775–781. https://doi.org/10.1016/j.ijmst.2018.08.006
Zhao J, Zhang X, Jiang N et al (2020) Porosity zoning characteristics of fault floor under fluid-solid coupling. Bull Eng Geol Env 79:2529–2541. https://doi.org/10.1007/s10064-019-01701-0
Zhu S, Jiang F, Kouame LX, Tan W, Zhang B, Zhang H (2016) Research on fault activation law of fully mechanized caving face in deep well and extra thick coal seam. J Rock Mech Eng 35(01):50–58
Zhu S, Ge D, Jiang F et al (2021) Rock burst mechanism under coupling action of working face square and regional tectonic stress. Shock Vib 2021:e5538179. https://doi.org/10.1155/2021/5538179
Funding
This project is supported by National Natural Science Foundation of China (52374241), Project of Improving Independent Innovation and Social Service Ability (Safety Discipline Group, 2022ZZCX01K05), China Postdoctoral Science Foundation (2020M672235), Postgraduate Research & Practice Innovation Program of Jiangsu Province (2023WLJCRCZL198), Funded by the Graduate Innovation Program of China University of Mining and Technology (KYCX23_2866).
Author information
Authors and Affiliations
Contributions
The authors declare that there is no conflict of interests regarding the publication of this paper. X.F., X.Z., Z.D wrote the main manuscript text, Q. H., D.W., and Z.C did data curation, All authors reviewed the manuscript.
Corresponding author
Ethics declarations
Competing interests
The authors declare no competing interests.
Conflict of interest
The authors declare that there is no conflict of interests regarding the publication of this paper.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Feng, X., Zhao, X., Ding, Z. et al. Numerical study on the influence of fault orientation on risk level of fault slip burst disasters in coal mines: a quantitative evaluation model. Environ Earth Sci 83, 94 (2024). https://doi.org/10.1007/s12665-023-11399-9
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s12665-023-11399-9