Skip to main content

Advertisement

SpringerLink
Log in

Characterization of Al-Si Alloy Reinforced with B4C and TiO2 Nanoparticles

  • Research
  • Published:
Silicon Aims and scope Submit manuscript

Abstract

Al-Si alloy as a matrix in Aluminium Metal Matrix Composites (AMCs) augments the hardness and strength. The work reports the characterization and mechanical properties of Hybrid Aluminium Metal Matrix Nanocomposites (HAMNCs) using Hypereutectic Al-Si grade LM30 alloy as the matrix with boron Carbide (nB4C) and Rutile (nTiO2) nanoparticles as reinforcements. Liquid metallurgy route ultrasonic squeeze-assisted stir-casting was employed to manufacture hybrid formulations. The HAMNC specimens were fabricated by maintaining 1 wt.% of nB4C and by varying TiO2 nanoparticles in steps of 0.25 wt.% in the 0 to 1 wt.% range. The optical micrographs revealed that ultrasonic vibration and squeeze casting effects aided the uniform distribution of nano reinforcements and lowered the porosity. XRD analysis revealed the formation of Aluminum Titanium Silicate (Al4Ti2SiO12) due to the addition of nTiO2. The results highlighted that the LM30 matrix having 1.0 wt.% of nB4C and 0.75 wt.% of nTiO2 exhibited the maximum hardness of 107.2 HRB, ultimate tensile strength of 265.52 MPa, and compressive strength of 656 MPa. The tensile fractography using FESEM highlighted the various kinds of dendrites associated with the fracture. nB4C and TiO2 nano reinforcements increased energy absorption during impact failure.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

Data Availability

No datasets were generated or analysed during the current study.

References

  1. Ramanathan A, Krishnan PK, Muraliraja R (2019) A review on the production of metal matrix composites through stir casting – Furnace design, properties, challenges, and research opportunities. J Manuf Process 42:213–245. https://doi.org/10.1016/j.jmapro.2019.04.017

    Article  Google Scholar 

  2. Dinesh Kumar PK, Darius Gnanaraj S (2023) Aluminium-Silicon based Metal Matrix Composites for brake rotor applications: a review. Eng Res Express 5. https://doi.org/10.1088/2631-8695/accdb6

  3. Singhal V, Pandey OP (2022) Influence of Dual Range Particle Size on Wear and Friction Properties of Ilmenite Reinforced Aluminium Metal Matrix Composite. Silicon 14:11805–11820. https://doi.org/10.1007/s12633-022-01901-6

    Article  CAS  Google Scholar 

  4. Sharma M, Singhal V, Gupta A et al (2023) Microstructural, Mechanical and Wear Characteristics of Industrial Waste (Brass Slag) Reinforced LM30 Alloy-Based Composite. Silicon. https://doi.org/10.1007/s12633-023-02665-3

    Article  Google Scholar 

  5. Sharma S, Gupta R, Nanda T, Pandey OP (2021) Influence of two different range of sillimanite particle reinforcement on tribological characteristics of LM30 based composites under elevated temperature conditions. Mater Chem Phys 258:123988. https://doi.org/10.1016/j.matchemphys.2020.123988

    Article  CAS  Google Scholar 

  6. Miladinović S, Stojanović B, Gajević S, Vencl A (2022) Hypereutectic Aluminum Alloys and Composites: A Review. Silicon 2507–2527. https://doi.org/10.1007/s12633-022-02216-2

  7. Samal P, Vundavilli PR, Meher A, Mahapatra MM (2020) Recent progress in aluminum metal matrix composites: A review on processing, mechanical and wear properties. J Manuf Process 59:131–152. https://doi.org/10.1016/j.jmapro.2020.09.010

    Article  Google Scholar 

  8. Jayaprakash D, Niranjan K, Vinod B (2023) Studies on Mechanical and Microstructural Properties of Aluminium Hybrid Composites: Influence of SiC/Gr Particles by Double Stir-Casting Approach. Silicon 15:1247–1261. https://doi.org/10.1007/s12633-022-02106-7

    Article  CAS  Google Scholar 

  9. Rajeev VR, Dwivedi DK, Jain SC (2010) Effect of load and reciprocating velocity on the transition from mild to severe wear behavior of Al-Si-SiCp composites in reciprocating conditions. Mater Des 31:4951–4959. https://doi.org/10.1016/j.matdes.2010.05.010

    Article  CAS  Google Scholar 

  10. Gnaneswaran P, Hariharan V, Chelladurai SJS et al (2022) Investigation on Mechanical and Wear Behaviors of LM6 Aluminium Alloy-Based Hybrid Metal Matrix Composites Using Stir Casting Process. Adv Mater Sci Eng 2022. https://doi.org/10.1155/2022/4116843

  11. Madhukar P, Mishra V, Selvaraj N et al (2022) Influence of Ultrasonic Vibration towards the Microstructure Refinement and Particulate Distribution of AA7150-B4C Nanocomposites. Coatings 12. https://doi.org/10.3390/coatings12030365

  12. Hu K, Yuan D, Lu S, Wu S (2018) Effects of nano-SiCp content on microstructure and mechanical properties of SiCp/A356 composites assisted with ultrasonic treatment. Trans Nonferrous Met Soc China English Ed 28:2173–2180. https://doi.org/10.1016/S1003-6326(18)64862-9

    Article  Google Scholar 

  13. Madhukar P, Selvaraj N, Gujjala R, Rao CSP (2019) Production of high performance AA7150-1% SiC nanocomposite by novel fabrication process of ultrasonication assisted stir casting. Ultrason Sonochem 58:104665. https://doi.org/10.1016/j.ultsonch.2019.104665

    Article  CAS  PubMed  Google Scholar 

  14. Yuan D, Yang X, Wu S et al (2019) Development of high strength and toughness nano-SiCp/A356 composites with ultrasonic vibration and squeeze casting. J Mater Process Technol 269:1–9. https://doi.org/10.1016/j.jmatprotec.2019.01.021

    Article  CAS  Google Scholar 

  15. Pragathi PRE (2023) Mechanical and microstructure behaviour of aluminum nanocomposite fabricated by squeeze casting and ultrasonic aided squeeze casting: A comparative study. J Alloys Compd 956:170203. https://doi.org/10.1016/j.jallcom.2023.170203

    Article  CAS  Google Scholar 

  16. Harichandran R, Selvakumar N (2018) Microstructure and mechanical characterization of (B4C+ h-BN)/Al hybrid nanocomposites processed by ultrasound assisted casting. Int J Mech Sci 144:814–826. https://doi.org/10.1016/j.ijmecsci.2017.08.039

    Article  Google Scholar 

  17. Kannan C, Ramanujam R (2017) Comparative study on the mechanical and microstructural characterisation of AA 7075 nano and hybrid nanocomposites produced by stir and squeeze casting. J Adv Res 8:309–319. https://doi.org/10.1016/j.jare.2017.02.005

    Article  CAS  PubMed Central  PubMed  Google Scholar 

  18. Shayan M, Eghbali B, Niroumand B (2019) Synthesis of AA2024-(SiO2np+TiO2np) hybrid nanocomposite via stir casting process. Mater Sci Eng A 756:484–491. https://doi.org/10.1016/j.msea.2019.04.089

    Article  CAS  Google Scholar 

  19. Bharathi P, Sampath Kumar T (2023) Effect of Silicon Carbide and Boron Carbide on Mechanical and Tribological Properties of Aluminium 7075 Composites for Automobile Applications. Silicon 15:6147–6171. https://doi.org/10.1007/s12633-023-02498-0

    Article  CAS  Google Scholar 

  20. Dinesh Kumar PK, Solomon DG (2023) Investigations on microstructure and mechanical properties on LM30-B4C nanocomposites fabricated through ultrasonic-squeeze assisted stir-casting. Mater Today Commun 37. https://doi.org/10.1016/j.mtcomm.2023.106978

  21. Prabhu SR, Shettigar AK, Herbert MA, Rao SS (2019) Microstructure and mechanical properties of rutile-reinforced AA6061 matrix composites produced via stir casting process. Trans Nonferrous Met Soc China English Ed 29:2229–2236. https://doi.org/10.1016/S1003-6326(19)65152-6

    Article  Google Scholar 

  22. Shayan M, Eghbali B, Niroumand B (2020) Fabrication of AA2024−TiO2 nanocomposites through stir casting process. Trans Nonferrous Met Soc China English Ed 30:2891–2903. https://doi.org/10.1016/S1003-6326(20)65429-2

    Article  Google Scholar 

  23. Madhukar P, Selvaraj N, Rao CSP, Veeresh Kumar GB (2019) Tribological behavior of ultrasonic assisted double stir casted novel nano-composite material (AA7150-hBN) using Taguchi technique. Compos Part B Eng 175. https://doi.org/10.1016/j.compositesb.2019.107136

  24. Mann VS, Pandey OP (2021) Effect of Dual Particle Size Corundum Particles on the Tribological Properties of LM30 Aluminium Alloy Composites for Brake Rotor Applications. Arab J Sci Eng 46:12445–12463. https://doi.org/10.1007/s13369-021-05939-3

    Article  CAS  Google Scholar 

  25. Abdudeen A, Mourad AHI, Qudeiri JA, Ziout A (2020) Evaluation of characteristics of A390 - SiCp squeeze cast and gravity cast composites. 2020 Adv Sci Eng Technol Int Conf ASET 2020. https://doi.org/10.1109/ASET48392.2020.9118349

  26. Dinesh Kumar PK, Darius Gnanaraj S (2024) Studies on Al-Si based hybrid aluminium metal matrix nanocomposites. Mater Today Commun 38. https://doi.org/10.1016/j.mtcomm.2024.108132

  27. Arivukkarasan S, Dhanalakshmi V, Stalin B, Ravichandran M (2018) Mechanical and tribological behaviour of tungsten carbide reinforced aluminum LM4 matrix composites. Part Sci Technol 36:967–973. https://doi.org/10.1080/02726351.2017.1331285

    Article  CAS  Google Scholar 

  28. Madhukar P, Selvaraj N, Rao CSP, Kumar GBV (2020) Enhanced performance of AA7150-SiC nanocomposites synthesized by novel fabrication process. 46:17103–17111. https://doi.org/10.1016/j.ceramint.2020.04.007

  29. Pragathi P, Elansezhian R (2022) Studies on microstructural and mechanical properties of (Nano SiC + Waste Spent catalyst) reinforced aluminum matrix composites. Mater Today Commun 30:103204. https://doi.org/10.1016/j.mtcomm.2022.103204

    Article  CAS  Google Scholar 

  30. Tharanikumar L, Mohan B, Anbuchezhiyan G (2022) Enhancing the microstructure and mechanical properties of Si3N4-BN strengthened Al-Zn-Mg alloy hybrid nano composites using vacuum assisted stir casting method. J Mater Res Technol 20:3646–3655. https://doi.org/10.1016/j.jmrt.2022.08.093

    Article  CAS  Google Scholar 

  31. Ozden S, Ekici R, Nair F (2007) Investigation of impact behaviour of aluminium based SiC particle reinforced metal-matrix composites. Compos Part A Appl Sci Manuf 38:484–494. https://doi.org/10.1016/j.compositesa.2006.02.026

    Article  CAS  Google Scholar 

  32. Reddy PS, Kesavan R, Vijaya Ramnath B (2018) Investigation of Mechanical Properties of Aluminium 6061-Silicon Carbide, Boron Carbide Metal Matrix Composite. Silicon 10:495–502. https://doi.org/10.1007/s12633-016-9479-8

    Article  CAS  Google Scholar 

Download references

Acknowledgements

The authors thank the management and administration of the Vellore Institute of Technology for providing the research infrastructure, support and cooperation for carrying out this research work.

Funding

The authors declare that no funds, grants, or other support were received during the preparation of this manuscript.

Author information

Authors and Affiliations

  1. School of Mechanical Engineering, Vellore Institute of Technology, Vellore, 632104, India

    P. K. Dinesh Kumar & S. Darius Gnanaraj

Authors
  1. P. K. Dinesh Kumar
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. S. Darius Gnanaraj
    View author publications

    You can also search for this author in PubMed Google Scholar

Contributions

D.K.P.K. designed the concept, interpreted the data and wrote the manuscript. D.G.S edited the manuscript. Both authors reviewed the manuscript.

Corresponding author

Correspondence to S. Darius Gnanaraj.

Ethics declarations

Ethics Approval

Not applicable.

Consent to Participate

Not applicable.

Consent for Publication

Not applicable.

Competing Interests

The authors declare no competing interests.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Dinesh Kumar, P.K., Darius Gnanaraj, S. Characterization of Al-Si Alloy Reinforced with B4C and TiO2 Nanoparticles. Silicon (2024). https://doi.org/10.1007/s12633-024-03012-w

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1007/s12633-024-03012-w

Keywords

Search

Navigation