Abstract
At present, with the continuous improvement of LED manufacturing technology, more stringent requirements are put forward for its packaging materials. How to reduce the packaging cost and further improve its luminous efficiency and service life is a problem that many scientific researchers have been committed to solving. In this study, a series of high refractive index hydrogen-containing methyl-phenyl silicone resins with different hydrogen contents were synthesized. Next, the hydrogen-containing silicone resins reacted with vinyl-phenyl MQ silicone resin, to obtain phenyl silicone materials. The cured products showed high light transmittance (> 90% at 480 nm), ultra-high hardness(> 86 shore D), good thermal stability(T5% > 436 ℃) and moderate tensile strength. In addition, increasing the hydrogen content could enhance the cross-link density, thereby improving the hardness of silicone materials. Compared with common commercial silicone resins on the market, the prepared hydrogen-containing methyl-phenyl silicone resins has excellent competitiveness. It can work as a crosslinker for addition-curing in high-power LED encapsulation.
Similar content being viewed by others
Data Availability
All data generated or analyzed during this study are included in this published article.
References
Musikant (1985) Optical materials: an introduction to selection and application
Liu JG, Ueda M (2009) High refractive index polymers: fundamental research and practical applications[J]. J Mater Chem 19:8907–8919
Wang MJ (1998) Effect of polymer-filler and filler-filler interactions on dynamic properties of filled vulcanizates[J]. Rubber Chem Technol 71(3):520–589
Rwei SP, Ku FH, Cheng KC (2002) Dispersion of carbon black in a continuous phase: Electrical, rheological, and morphological studies[J]. Colloid Polym Sci 280(12):1110–1115
Izumi A, Shudo Y, Nakao T et al (2016) Cross-link inhomogeneity in phenolic resins at the initial stage of curing studied by 1H-pulse NMR spectroscopy and complementary SAXS/WAXS and SANS/WANS with a solvent-swelling technique[J]. Polymer 103:152–162
Pistor V, Soares BG, Mauler RS (2013) Influence of different concentrations of N-phenylaminopropyl - POSS on the thermodynamic fragility of the cured epoxy resin[J]. Polymer 54(9):2292–2298
Dušek K, Pleštil J, Lednický F, Luňák S (1978) Are cured epoxy resins inhomogeneous?[J]. Polymer 19(4):393–397
Dušek K (1996) Are cured thermoset resins inhomogeneous?[J]. Macromol Mater Eng 240(1):1–15
Huang LJ, Geng L, Peng HX (2015) Microstructurally inhomogeneous composites: Is a homogeneous reinforcement distribution optimal?[J]. Prog Mater Sci 71:93–168
de Boer JH (1936) The influence of van der Waals’ forces and primary bonds on binding energy, strength and orientation, with special reference to some artificial resins[J]. Trans Faraday Soc 32:10
Houwink R (1936) The strength and modulus of elasticity of some amorphous materials, related to their internal structure [J]. Trans Faraday Soc 32(1):122–131
Bae JY, Kim YH, Kim HY et al (2013) Sol–gel synthesized linear oligosiloxane-based hybrid material for a thermally-resistant light emitting diode (LED) encapsulant [J]. RSC Adv 3(23):8871–8877
Zhao M, Feng Y, Li Y et al (2014) Fabrication of Siloxane Hybrid Material With High Adhesion and High Refractive Index for Light Emitting Diodes (LEDs) Encapsulation[J]. J Macromol Sci A Chem 51(8):653–658
Kim JS, Yang SC, Kwak SY et al (2012) High performance encapsulant for light-emitting diodes (LEDs) by a sol–gel derived hydrogen siloxane hybrid [J]. J Mater Chem 22(16):7954
Yang X, Qian S, Yang L et al (2013) Preparation and performance of high refractive index silicone resin-type materials for the packaging of light-emitting diodes[J]. J Appl Polym Sci 127(3):1717–1724
Kim JS, Yang SC, Bae BS (2010) Thermally Stable Transparent Sol−Gel Based Siloxane Hybrid Material with High Refractive Index for Light Emitting Diode (LED) Encapsulation [J]. Chem Mater 22(11):3549–3555
Lewis LN, Lewis N (1986) Platinum-catalyzed hydrosilylation - colloid formation as the essential step[J]. J Am Chem Soc 108(23):7228–7231
Acknowledgements
This project was supported by Guangdong Basic and Applied Basic Research Foundation
Funding
This work was supported by Guangdong Basic and Applied Basic Research Foundation under the grant No. 2021A1515010945.
Author information
Authors and Affiliations
Contributions
Zhaoqun Pan contributed to conception of the study; Yu Cheng performed the experiment; Zhaoqun Pan, Yu Cheng contributed significantly to analysis and manuscript preparation; Zhaoqun Pan, Yu Cheng performed the data analyses and wrote the manuscript; Yu Cheng and Zhun Zhang helped perform the analysis with constructive discussions.
Corresponding author
Ethics declarations
Consent to Participate
Not applicable.
Consent for Publication
Not applicable.
Conflict of Interest
The author declare that they have no conflict of interest.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Pan, Z., Cheng, Y. & Zhang, Z. Synthesis of High Refractive Index Silicone LED Encapsulation with Ultra-High Hardness. Silicon 14, 7863–7870 (2022). https://doi.org/10.1007/s12633-021-01541-2
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12633-021-01541-2