Abstract
To evaluate AA7075 (aluminium alloy) and its nanocomposites reinforced with (SiO2 + Al2O3) Al2SiO5 layered nanoparticle as possible material for high temperature wear condition, materials were tested under different temperatures (313 K, 353 K, 393 K and 433 K) respectively. High temperature wear tests were carried out at a constant load of 24.5 N, sliding speed of 3.14 m/s and distance of 2000 m respectively. This enabled to understand the effect of reinforcement at high temperature and its wear mechanisms of AA7075 / nanocomposite materials. The worn surface topography was carefully inspected using field emission – scanning electron microscope, X-ray energy-dispersive spectroscopy and optical metallurgical microscope. At the testing temperature range of 433 K wear resistance of the nanocomposites is increased, compared to AA7075 matrix material. The friction coefficient of the matrix and nanocomposite materials are deliberated. Based on the worn surface analysis, high temperature condition wear mechanisms of the nanocomposites are adhesive wear, delamination wear and oxidation wear.
Similar content being viewed by others
References
Vijaya Kumar P, Madhusudhan Reddy G, Srinivasa Rao K (2015) Microstructure, mechanical and corrosion behavior of high strength AA7075 aluminium alloy friction stir welds – Effect of post weld heat treatment. Def Technol 11:362–369
Rometsch PA, Zhang Y, Knight S (2014). Trans Nonferrous Met Soc China 24:2003–2017
Yang X, Lin C, Jin X, Jiancheng D, Xue W (2019) Influence of temperature on tribological properties of microarc oxidation coating on 7075 aluminium alloy at 25 °C –300 °C. Cer Int 45:12312–12318
Peng JF (2018). Wear 402–403:160–168
Harrison TJ, Crawford BR, Janardhana M, Clarka G (2011). Proce Eng 10:3117–3121
Ramesh CS, Keshavamurthy R, Channabasappa BH, Pramod S (2010). Tribol Int 43:C623–C634
Kumar S, Balasubramanian V (2008). Wear 264:1026–1034
Mandal A, Chakraborty M, Murty BS (2007) Effect of TiB2 particles on sliding wear behaviour of Al–4Cu alloy. Wear 262:160–166
Yilmaz O, Buytoz S (2001) Abrasive wear of Al2O3-reinforced aluminium-based MMCs. Compos Sci Technol 61:2381–2392
Pradeep P, Kumar PSSR, Lawrence ID, Jayabal S (2017). Int J Civil Eng Technol 8:178–190
Atrian A, Majzoobi GH, Enayati MH, Bakhtiari H (2015). Advanc Powder Technol 26:73–82
Hernández Martínez SE, Cruz-Rivera JJ, Garay-Reyes CG, Elias-Alfaro CG, Martínez-Sánchez R, Hernández-Rivera JL (2015). Powder Technol 284:40–46
Siddesh Kumar NG, Suresh R, Shiva Shankar GS (2020). Comput Commun 19:61–73
Wang YQ, Li SJ (2011). Trans Nonferrous Met Soc China 21:1441–1448
Michael Rajan B, Ramabalan S, Dinaharan I, Vijay SJ (2014) Effect of TiB2 content and temperature on sliding wear behavior of AA7075/TiB2 in situ aluminum cast composites. Arch Civ Mech Eng 14:72–79
Mobasherpour I, Tofigh AA, Ebrahimi M (2013) Effect of nano-size Al2O3 reinforcement on the mechanical behavior of synthesis 7075 aluminum alloy composites by mechanical alloying. Mater Chem Phy 138:535–541
Nemati N, Khosroshahi R, Emamy M, Zolriasatein (2011). Mater Des 32:3718–3729
Kumar PSSR, Sudhagar PE, Alexis SJ, Subramani M (2019). Trans Indian Inst Met 72:2449–2456
Kumar PSSR, Robinson Smart DS, John Alexis S (2018) IOP Conf. Ser Mater Sci Eng 346:1–7
Agbeleye AA, Esezobor DE, Balogun SA, Agunsoye JO, Solis J, Neville A (2020). J King Saud Uni Sci 32:21–28
Du J, Liu YH, Yu SR, Li WF (2004). Wear 257:930–940
Baradeswaran A, Elaya Perumal A (2014). Compos Part B 56:464–471
Ahmadi A, Toroghinej MR, Najafizadeh A (2014) Evaluation of microstructure and mechanical properties of Al/Al2O3/SiC hybrid composite fabricated by accumulative roll bonding process. Mater Des 53:13–19
Uthayakumar M, Thirumalai Kumaran S, Adam Khan M, Skoczypiec S, Bizon W (2020). J Test Evaluat 48(4):3073–3086
Thirumalai Kumaran S, Ko TJ, Uthayakumar M, Adam Khan M, Muhammad I (2017). Mater Manuf Processes 32(13):1557–1564
Adam Khan M, Sundarrajan S, Duraiselvam M, Natarajan S, Senthil Kumar A (2017). Surface Eng 33(1):35–41
Deuis RL, Subramanian C, Yellup JM (1997) Dry sliding wear of aluminium composites—A review. Compos Sci Technol 57:415–435
Zhang Q, Wei S, Jie G, Qi M (2020) High-temperature dry sliding Wear behavior of Al–12Si–CuNiMg alloy and its Al2O3 fiber-reinforced composite. Met Mater Int. https://doi.org/10.1007/s12540-020-00654-4
Raju RSS, Panigrahi MK, Ganguly RI, Rao GS (2019). Tribol Int 129:55–66
Rajaram G, Kumaran S, Rao TS (2010, 2010). Mater Sci Eng A 528(247–253)
Tian W-S, Zhao Q-L, Zhao C-J, Qiu F, Jiang Q-C (2017) The Dry Sliding Wear Properties of Nano-Sized TiCp/Al-Cu Composites at Elevated Temperatures. Mater 10:939
Zhu H, Jar C, Song J, Zhao J, Li J, Xie Z (2012) High temperature dry sliding friction and wear behavior of aluminum matrix composites (Al3Zr+α-Al2O3)/Al. Tribol Int 48:78–86
Singh N, Haq MIU, Raina A, Anand A, Kumar V, Sharma SM (2018). Alexandria Eng J 57(3):1323–1330
Haq MIU, Anand A (2018) Dry Sliding Friction and Wear Behavior of AA7075-Si3N4 Composite. Silicon 10:1819–1829
Haq MIU, Anand A (2018). Mater Res Express 5(6):066544
Siddesh Kumar NG, Suresh R, Shiva Shankar GS (2020) High temperature wear behavior of Al2219/n-B4C/MoS2 hybrid metal matrix composites. Composite Commun 19:61–73
ASTM G99–17 (2017) Standard test method for Wear testing with a pin-on-disk apparatus. ASTM International, West Conshohocken. https://doi.org/10.1520/G0099-17
ASTM E18–15 (2015) Standard test methods for Rockwell hardness of metallic materials. ASTM International, West Conshohocken. https://doi.org/10.1520/E0018-15
Ramkumar KR, Sivasankaran S, Al-Mufadi FA, Siddharth S, Raghu R (2019). Arch Civil Mech Eng 19:428–438
Jagannatham M, Senthil Saravanan MS, Sivaprasad K (2018). J Mater Eng Perform 27:5675–5688
Agbeleye AA, Esezobor DE, Agunsoye JO, Baloguna SA, Sosimib AA (2018). J Taibah Uni Sci 12:235–240
Zuo M, Sokoluk M, Cao C, Yuan J, Zheng S, Li X (2019). Nano-Treating Sci Rep 9:1–11
Shivamurthya RC, Surappa MK (2011) Tribological characteristics of A356 Al alloy–SiCP composite discs. Wear 271:1946–1950
Pauschitz A, Roy M, Franek F (2008) Mechanisms of sliding wear of metals and alloys at elevated temperatures. Tribol Int 41:584–602
Manohara HR, Chandrashekharaiah TM, Venkateswarlu K, Kori SA (2013) Sliding wear performance of reinforced A413 alloy at elevated temperatures. Int J Adv Manuf Technol 65:395–402
Kamalpreet K, Pandey OP (2013). J Mater Eng Perform 22:3101–3110
Okonkwo PC, Kelly G, Rolfe BF, Pereira MP (2012). Wear 282:22–30
Hamid AA, Ghosh PK, Jain SC, Ray S (2008). Wear 165:14–26
Rosenberger MR, Schvezov CE, Forlerer E (2005). Wear 259:590–601
Haq MIU, Anand A (2019) Friction and Wear Behavior of AA 7075- Si3N4 Composites Under Dry Conditions: Effect of Sliding Speed. Silicon 11:1047–1053
Acknowledgements
The authors thank the University of Johannesburg, South Africa to carryout research.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Kumar, P.S.S.R., Mashinini, P.M. Dry Sliding Wear Behaviour of AA7075 – Al2SiO5 Layered Nanoparticle Material at Different Temperature Condition. Silicon 13, 4259–4274 (2021). https://doi.org/10.1007/s12633-020-00728-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12633-020-00728-3