Abstract
Glass fibres consists of around 54% silicon dioxide reinforced Aluminium Sandwich laminates have the potential in meeting the demands of structural applications of the aerospace and other industries. These laminates are developed mainly to achieve the target of production of light weight structures, which comparatively has a good strength. The combination of fibre and metal offers an excellent mechanical property for the laminates and the same is improved by different fibre orientation and layer formation. The performance of laminate improves by choosing the right fibre orientation. In the present study, the sandwich laminate is laid up by using Aluminium (AA 1050) and Glass Fibre Unidirectional (UD) Ply as layers. The laminate consists of 5 layers of UD glass fibre as the outer and middle layers, Aluminium as the second and fourth layer. The fabricated sandwich laminates are able to introduce an ease of fabrication and affordability concept, which is also used as a substitute material for metallic components with light weight and corrosion resistance. The fabricated laminate is tested under various loading conditions like tensile, flexural and impact. The result shows that the tensile property of the laminate is greater than its flexural and impact properties. The defects of the surface topography of the broken specimen is analysed using Scanning Electron Microscopy.
Similar content being viewed by others
References
Hine PJ, Duckett RA, Kaddour AS, Hinton MJ, Wells GM (2005) The effect of hydrostatic pressure on the mechanical properties of glass fibre/epoxy unidirectional composites. Comp Part A: Appl Sci Manuf 36(2):279–289
Selmy AI, Elsesi AR, Azab NA, Abd El-baky MA (2012) In-plane shear properties of unidirectional glass fibre (U)/random glass fibre (R)/epoxy hybrid and non-hybrid composites. Comp Part B: Eng 43(2):431–438
Wu G, Yang J-M (2005) The mechanical behavior of GLARE laminates for aircraft structures, Overview Failure in Structural Materials. JOM 57(1):72–79
Khalili SMR, Mittal RK, Gharibi Kalibar S (2005) A study of the mechanical properties of steel/aluminium/GRP laminates. Mater Sci Eng A 412(1–2):137–140
Abdulmajeed AA, Närhi T O, Vallittu PK, Lassila LV (2011) The effect of high fibre fraction on some mechanical properties of unidirectional glass fibre-reinforced composite. Dental Mater 27(4):313–321
Czel G, Jalalvand M, Wisnom MR (2016) Design and characterisation of advanced pseudo-ductile unidirectional thin-ply carbon/epoxy–glass/epoxy hybrid composites. Comp Struct 143:362–370
Kaleemulla KM, Siddeswarappa B (2009) Influence of fibre orientation on the in-plane mechanical properties of laminated hybrid polymer composites. J Reinforced Plast Comp 29(12):1900– 1914
Al-Hasani ES (2007) Study of tensile strength and hardness property for epoxy reinforced with glass fibre layers. Eng Technol 25(8):988–997
de Paiva JMF, Mayer S, Cerqueria Rezende M (2005) Evaluation of mechanical properties of four different carbon/epoxy composite used in aeronautical field. Mater Res 8(1):91–97
Torabizadeh MA (2013) Tensile, compressive and shear properties of unidirectional glass/epoxy composites subjected to mechanical loading and low temperature services. Ind J Eng Mater Sci 20:299–309
Gommers B, Verpoest I, Van Houtte P (1998) Determination of the mechanical properties of composite materials by tensile tests. J Comp Mater 32:102–122
Palanikumar K, Ramesh M, Reddy KH (2016) Experimental investigation on the mechanical properties of green hybrid sisal and glass fibre reinforced polymer. J Nat Fibres 13:321–331
Keshavamurthy YC, Nanjundaradhya NV, Sharma RS, Kulkarni RS (2012) Investigation of tensile properties of fibre reinforced angle ply laminated composites. Int J Emerg Technol Adv Eng 2(4):700–703
Tanwer AK (2014) Mechanical properties testing of uni-directional and bi-directional glass fibre reinforced epoxy based composites. Int J Res Advent Technol 2(11):34–39
Cortes P, Cantwell WJ (2004) The tensile and fatigue properties of carbon fibre-reinforced PEEK-titanium fibre metal laminates. J Reinforced Plast Comp 23(15):1615–1623
Yadaw RC, Chaturvedi S (2012) An investigation of mechanical and sliding wearbehavior of glass fibre reinforced polymer composite with or without addition of silica (SiO2). In: International conference on PFAM XXI, IIT Guwahati, CM-96
Schwartz MM (1997) Composite materials: properties, nondestructive testing and repair, vol 1. Prentice- Hall Inc., New Jersey
Hassan MK, Abdellah MY, Azabi SK, Marzouk WW (2015) Investigation of the mechanical behavior of novel fibre metal laminates. Intern J Mech Mechatron Eng IJMME-IJENS 15(3):112–118
Baker AA, Callus PJ, Georgiadis S, Falzon PJ, Dutton SE, Leong KH (2002) An affordable methodology for replacing metallic aircraft panels with advanced composites. Comp: Part A 33:687–696
Selaand N, Ishai O (1989) Interlaminar fracture toughness and toughening of laminated composite materials: A review. Composites 20(20):423–425
Mouritz A, Leong K, Herszberg I (1997) A review of the effect of stitching in the in plane mechanical properties of fibre reinforced polymer composites. Comp: Part A 28(12):979–991
Periasamy M, Manickam B, Hariharasubramanian K (2012) Impact properties of aluminium-glass fibre reinforced plastics sandwich panels. Mater Res 15(3):347–354
Sinmazçelik T, Avcu E, Bora M, Çoban O (2011) A review: fibre metal laminates, background, bonding types and applied test methods. Mater Design 32:3671–3685
Standards ASTM (2000) ASTM D3039: standard test method for tensile properties of polymer matrix composite materials, ASTM, West Conshohohoken, PA
ASTM Standards (2002) ASTM D790: standard test methods for flexural properties of unreinforced and reinforced plastics and electrical insulating materials. ASTM, West Conshohohoken, PA
ASTM Standards (2000) ASTM D256: Standard test method for determining izod pendulum impact resistance of plastics. West Conshohohoken, PA
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Devi, G.R., Palanikumar, K. Mechanical Properties Evaluation of Unidirectional Glass Fibre Reinforced Aluminium Sandwich Laminate. Silicon 10, 2329–2340 (2018). https://doi.org/10.1007/s12633-018-9768-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12633-018-9768-5