Abstract
Drilling force directly affects the micro drill life and micro hole quality in the micro hole drilling of printed circuit board (PCB). But in the micro hole drilling process, the signal-to-noise ratio (SNR) of drilling force signal is low. Drilling force signal often submerged by noise signal, these brings great difficulty to measurement during PCB drilling process. Therefore, it is urgent to improve the SNR of drilling force signal in PCB drilling process. The observed signal of drilling force is obtained by PCB micro hole drilling experiment. Based on the cyclostationary and time domain accumulation theory, the drilling force signal is quadratic filtered, and the filtering effect of the filter on the drilling force signal is evaluated. In this paper, a composite multiple filter is designed to improve the SNR of drilling force signal rapidly and efficiently (SNR increased by 11.76 dB), realize the accurate description of the PCB micro hole drilling process.
Similar content being viewed by others
References
Shi, H., Liu, X., Lou, Y. (2019). Materials and micro drilling of high frequency and high speed printed circuit board: a review. The International Journal of Advanced Manufacturing Technology, 100.
Zheng, L. J., Wang, C. Y., Qu, Y. P., Yang, L. P., & Song, Y. X. (2011). The investigation of thrust force of printed circuit board drilling. Key Engineering Materials, 496, 259–265.
Anand, R. S., Patra, K., Steiner, M., & Biermann, D. (2016). Mechanistic modeling of micro drilling cutting forces. The International Journal of Advanced Manufacturing Technology, 88(1–4), 241–254.
Allaparthi, M., Rajik, K. M., & Teja, B. (2018). Three-dimensional finite element dynamic analysis for micro-drilling of multi-layered printed circuit board. Materials Today: Proceedings, 5(2), 7019–7028.
Gong, F., Qiang, B., Ji, C., & Li, B. (2013). Experimental study on PCB micro drilling force. Applied Mechanics and Materials, 246–247, 1017–1021.
Zheng, X. H., Liu, Z. Q., An, Q. L., Chen, M., & Wang, C. Y. (2012). Experimental research on the high speed drilling of pcb using microdrill. Advanced Materials Research, 426, 223–226.
Shi, H., Song, F., & Fu, L. (2011). Experimental study on drilling force in printed circuit board micro drilling process. Circuit World, 37(1), 24–29.
Patra, K., Jha, A. K., Szalay, T., Ranjan, J., & Monostori, L. (2017). Artificial neural network based tool condition monitoring in micro mechanical peck drilling using thrust force signals. Precision Engineering, 48, 279–291.
Qu, Y. P., Wang, C. Y., Zheng, L. J., & Song, Y. X. (2012). Wavelet transform denoise of PCB drilling force signal. Advanced Materials Research, 500, 26–31.
Malekian, M., Park, S. S., & Jun, M. B. G. (2009). Tool wear monitoring of micro-milling operations. Journal of Materials Processing Technology, 209(10), 4903–4914.
Shi, H., Lin, X., Yan, Q., & Zhang, J. (2018). The influence of properties of printed circuit board resin and filler on drilling force. Circuit World, 44(4), 165–170.
Gardner, A. (1992). Exploitation of spectral redundancy in cyclostationary signals. IEEE Signal Processing Magazine, 8(2), 14–36.
Funding
The funding was provided by Project of Shenzhen Science and Technology Innovation, China (Grant No. JCYJ20170817101008562).
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Tao, S., Gao, Z. & Shi, H. Characterization of Printed Circuit Board Micro-Holes Drilling Process by Accurate Analysis of Drilling Force Signal. Int. J. Precis. Eng. Manuf. 23, 131–138 (2022). https://doi.org/10.1007/s12541-021-00603-0
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12541-021-00603-0