Abstract
Exploring the self-healing capability in a metallic system, an experimental study was carried out for AA2014 and Nitinol-based smart composites material. The damage produced through the flexural test was healed by thermal heat treatment through compositional healing. The objective of this work is to enhance the recovery in self-healing assessment through different hardening processes. Strengthening model (solution hardening and age hardening) as a strength enhancement is employed on the healed samples (i.e. after heat treatment) to evaluate its effect and impact on different healing assessments. Further, XRD analysis was performed to explain how the developed residual stress in the microstructure is responsible in affecting the healing characteristics after each heat treatment processes. The obtained result show about 81.66% recovery in crack depth, 23.92% recovery in ductility, 84.3% recovery in crack width and 27.8% recovery in flexural strength after ageing.
Graphic Abstract
Similar content being viewed by others
References
Y. Nishida, in Introduction to Metal Matrix Composites Fabrication and Recycling, ed. by Y. Nishida (Springer, Tokyo, 2013), pp. 27–50
P.K. Rohatgi, Def. Sci. J. 43, 323–349 (1993)
J. Hooker, P. Doorbar, in Series in Materials Science and Engineering Series- Metal and Ceramic Matrix Composites, 7th edn., (Institute of Physics Publishing, London, 2004). https://www.taylorfrancis.com/books/9781420033977)
M.V. Manuel, in Self Healing Materials, vol. 100, ed. by S. KumarGhosh (Wiley VCH, Hoboken, 2007), pp. 251–263. https://doi.org/10.1007/978-1-4020-6250-6
E. Schlangen, N. Heide, K. Van Breugel, in Measuring, Monitoring and Modeling Concrete Properties, ed. by M.S. Konsta-Gdoutos (Springer, Dordrecht, 2006), pp. 273–284
A. K. Chattopadhyay, M. R. Zentner, Aerospace and Aircraft Coatings (Federation of Societies for Coatings Technology, Philadelphia, PA, 1990), p. 18
G. Bierwagen, J. Coat. Technol. 73, 45–52 (2001)
Y. Wang, D.T. Pham, C. Ji, Cogent Eng. 2012, 1–28 (2015)
A.D. Moghadam et al., JOM 66, 872–881 (2014)
J.J. Sobczak, L. Drenchev, Self-Healing Metallic Materials (Instytut Odlewnictwa, Foundry Research Institute, Krakow, 2014), pp. 68–77
J.B. Ferguson, B.F. Schultz, P.K. Rohatgi, JOM 66, 866–871 (2014)
B.J. Blaiszik et al., Annu. Rev. Mater. Res. 40, 179–211 (2010)
R.A.J. Martinez-Lucci, A. Ruzek, S.K. Misra, P.K. Rohatgi, AFS Trans. Foundry Soc. 119, 187 (2011)
K.K. Alaneme, M.O. Bodunrin, Appl. Mater. Today 6, 9–15 (2017)
M. Nosonovsky, P.K. Rohatgi, in Biomimetics in Material Science, ed. by R. Hull, C. Jagadish, R.M. Osgood, J.J. Parisi, Z. Wang (Springer, New York, 2012), pp. 87–122
V. Srivastava, M. Gupta, Mater. Today Proc. 2018 Publ. 5, 19703–19713 (2018)
M.V. Manuel, G. B. Olson, in Proceedings on 1st International Conference of Self-Healing Materials, pp. 1–10 (2007)
M. Viola, Thesis (Northwestern University, 2007)
J.B. Ferguson, B.F. Schultz, P.K. Rohatgi, Mater. Sci. Eng. A 620, 85–88 (2014)
M.A. Poormir, S. Mohammad, R. Khalili, J. Intell. Mater. Syst. Struct. SAGE 29, 3972–3982 (2018)
M.A. Poormir, S. Mohammad, R. Khalili, JOM 70, 806–810 (2018)
R. Sadeler, Y. Totik, M. Gavgali, I. Kaymaz, Mater. Des. 25, 439–445 (2004)
A.A. Saleh, Contemp. Eng. Sci. 11, 3409–3419 (2018)
K.B. Sravani, A. Uma, V. Sindhu, S.P. Devi, G. Padmava, Int. J. Adv. Mech. Civ. Eng. 3, 79–83 (2016)
S.K. Burke, Non Destruct. Aust. 39, 18–22 (2002)
W.D. Callister, J. Wiley, in Materials Science and Engineering an Introduction, 7th edn., ed. by W.D. Callister (Wiley, Salt City Lake, UT, 2006), pp. 252–304
B.D. Cullity, in Elements of X-Ray Diffraction, 2nd edn., ed. by M. Cohen (Addison-Wesley Publishing Company, Inc, Philippines, 1977), pp. 281–321
A. Jesche, M. Fix, A. Kreyssig, W.R. Meier, P.C. Canfield, Philos. Mag. 96, 1–9 (2016)
L. Alexander, H.P. Klug, J. Appl. Phys. 21, 1–7 (1950)
A.J.C. Wilson, J. Appl. Crystallogr. 11, 102–113 (1978)
H. Xu, H. Guo (eds.), Thermal Barrier Coatings (Woodhead Publishing Limited, Sawston, 2011), pp. 75–96. https://doi.org/10.1533/9780857090829.1.75
A. Younes et al., Appl. Surf. Sci. 446, 258–265 (2018)
P. Bindu, S. Thomas, J. Theor. Appl. Phys. 8, 123–134 (2014)
I. Kaban, S. Mhiaoui, W. Hoyer, J.-G. Gasser, J. Phys.: Condens. Matter 17, 7867–7873 (2005)
M.C. Wright, M. Manuel, T. Wallace, Fatigue Resistance of Liquid-Assisted Self-Repairing Aluminum Alloys Reinforced with Shape Memory Alloys Shape Memory Alloy: Self-Healing (SMASH) Technology for Aeronautical Applications (Hanover, 2013). Available at https://nari.arc.nasa.gov/sites/default/files/Wright_ARMDFY12SeedlingFinalReportKSCCWrightSMASHTechnology.pdf
G.K. Williamson, W.H. Hall, Acta Metall. 1, 22–31 (1953)
T. Ungar, Scr. Mater. 51, 777–781 (2004)
R. N. Lumley, I. J. Polmear, in Proceedings of the First International Conference on Self Healing Materials (Springer, 2007), pp. 1–11
P.K. Rohatgi, Mater. Sci. Eng. 619, 73–76 (2014)
K. Venkateswarlu, M. Sandhyarani, T.A. Nellaippan, N. Rameshbabu, Procedia Mater. Sci. 5, 212–221 (2014)
A.M. Page, T.A. Wesley, in Exploration: Natural Science and Engineering (2015), pp. 101–108
S.J. Park, K. Cowan, J.L. Johnson, R.M. German, Int. J. Refract. Metals Hard Mater. 26, 152–163 (2008)
H. Engqvist, Int. J. Refract. Metals Hard Mater. 21, 31–35 (2003)
Z.C. Cordero et al., Int. Mater. Rev. 66, 495–512 (2016)
N. Hansen, Scr. Mater. 51, 801–806 (2004)
M. Kato, Mater. Trans. 55, 19–24 (2014)
Q. Xiao et al., J. Alloys Compd. 695, 1005–1013 (2019)
F. Tariq, N. Naz, R. Ahmed, J. Nondestr. Eval. 31, 17–33 (2012)
F.K. Md, S.K. Panigrahi, J. Magnes. Alloys 3, 210–217 (2015)
V. Srivastava, M. Gupta, Mater. Res. Express 6, 1–18 (2019)
G.K. Williamson, R.E. Smallman, Philos. Mag. 1, 34–46 (2006)
Acknowledgements
I would like to thank Advanced Center for Materials Science and Material Science Engineering Department, Indian Institute of Technology Kanpur, India for extending the facilities for conducting SEM (Imaging). I would be thankful to Center for Interdisciplinary Research, Motilal Nehru National Institute of Technology Allahabad, India for performing XRD analysis. I am grateful to Director, Gulachi Engineers Pvt. ltd., Ghaziabad, India for providing Eddy current test facility. The Ministry of Human Resource Development, Government of India is gratefully acknowledged for financial assistance.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Srivastava, V., Gupta, M. Impact of Post Hardening Mechanism on Self-Healing Assessment of AA2014 Nitinol-Based Smart Composites. Met. Mater. Int. 27, 2666–2681 (2021). https://doi.org/10.1007/s12540-020-00630-y
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12540-020-00630-y