Abstract
Recent studies show an interest on the static and dynamic mechanical properties in applications where both influence the overall performance of mechanical systems. This study explores the impact of the T6 heat treatment in the elastic and damping properties of Al–Si–Mg alloys. Consequently, the role of such properties is characterized by the stresses that are developed in resonant structures. Experimental testing shows that, due to pinning length modifications, the heat treatments generate a progressive increase in Young’s modulus and a reduction in loss factor. Recurring to finite element analysis, it is concluded that such modifications in material properties generate a reduction in resonant stress after solution treatment. This stress tends to increase as the artificial ageing progresses. A model, based on an exponential decay function, is proposed to describe the variation of resonant stress as the elastic and damping properties are changed during the T6 treatment.
Similar content being viewed by others
References
P. Fan, S. Cockcroft, D. Maijer, L. Yao, C. Reilly, A. Phillion, Examination and simulation of silicon macrosegregation in A356 wheel casting. Metals 8(7), 503 (2018)
C. Lee, Effect of Ti-B addition on the variation of microporosity and tensile properties of A356 aluminium alloys. Mater. Sci. Eng. A 668, 152–159 (2016)
İ. Öztürk, G. Hapçı Ağaoğlu, E. Erzi, D. Dispinar, G. Orhan, Effects of strontium addition on the microstructure and corrosion behavior of A356 aluminum alloy. J. Alloys Compd. 763, 384–391 (2018)
Z. Liang, Q. Zhang, Quasi-static loading responses and constitutive modeling of Al–Si–Mg alloy. Metals 8(10), 838 (2018)
M.J. Roy, D.M. Maijer, L. Dancoine, Constitutive behavior of as-cast A356. Mater. Sci. Eng. A 548, 195–205 (2012)
B. Dang, C. Liu, F. Liu, Y. Liu, Y. Li, Effect of as-solidified microstructure on subsequent solution-treatment process for A356 Al alloy. Trans. Nonferrous Met. Soc. China 26(3), 634–642 (2016)
R.G. Guan, Z.Y. Zhao, Y.D. Li, T.J. Chen, S.X. Xu, P.X. Qi, Microstructure and properties of squeeze cast A356 alloy processed with a vibrating slope. J. Mater. Process. Technol. 229, 514–519 (2016)
Z. Zhang, J. Li, H. Yue, J. Zhang, T. Li, Microstructure evolution of A356 alloy under compound field. J. Alloys Compd. 484(1), 458–462 (2009)
W. Xiaoyan, Z. Huarui, J. Feng, Y. Ying, J. Lina, Z. Hu, Microstructure and grain refinement performance of a new Al-5Nb-RE-B master alloy. Rare Met. Mater. Eng. 47(7), 2017–2022 (2018)
Q. Wang, Z. Shi, H. Li, Y. Lin, N. Li, T. Gong, R. Zhang, H. Liu, Effects of holmium additions on microstructure and properties of A356 aluminum alloys. Metals 8(10), 849 (2018)
X.L. Cui, Y.Y. Wu, T. Gao, X.F. Liu, Preparation of a novel Al–3B–5Sr master alloy and its modification and refinement performance on A356 alloy. J. Alloys Compd. 615, 906–911 (2014)
H. Puga, J. Barbosa, N.Q. Tuan, F. Silva, Effect of ultrasonic degassing on performance of al-based components. Trans. Nonferrous Met. Soc. China 24(11), 3459–3464 (2014)
N.Q. Tuan, H. Puga, J. Barbosa, A.M.P. Pinto, Grain refinement of Al–Mg–Sc alloy by ultrasonic treatment. Met. Mater. Int. 21(1), 72–78 (2014)
S. Joseph, S. Kumar, Role of Si modification on the compressive flow behavior of Al–Si based alloy. Mater. Charact. 110, 272–281 (2015)
J. Rao, J. Zhang, R. Liu, J. Zheng, D. Yin, Modification of eutectic Si and the microstructure in an Al–7Si alloy with barium addition. Mater. Sci. Eng. A 728, 72–79 (2018)
W. Liu, W. Xiao, C. Xu, M. Liu, C. Ma, Synergistic effects of Gd and Zr on grain refinement and eutectic Si modification of Al–Si cast alloy. Mater. Sci. Eng. A 693, 93–100 (2017)
V.H. Carneiro, H. Puga, J. Meireles, Heat treatment as a route to tailor the yield-damping properties in A356 alloys. Mater. Sci. Eng. A 729, 1–8 (2018)
F.J. Alvarez-Antolin, E. Segurado-Frutos, H. Neira-Castaño, J. Asensio-Lozano, Heat treatment optimization in Al–Cu–Mg–Si alloys, with or without prior deformation. Metals 8(10), 735 (2018)
V.H. Carneiro, H. Puga, Solution treatment enhances both static and damping properties of Al–Si–Mg alloys. Metall. Mater. Trans. A 49(12), 5942–5945 (2018)
R. Gecu, S. Acar, A. Kisasoz, K.A. Guler, A. Karaaslan, Influence of T6 heat treatment on A356 and A380 aluminium alloys manufactured by Thixoforging combined with low superheat casting. Trans. Nonferrous Met. Soc. China 28(3), 385–392 (2018)
S.L. Pramod, Ravikirana, A.K.P. Rao, B.S. Murty, S.R. Bakshi, Effect of Sc addition and T6 aging treatment on the microstructure modification and mechanical properties of A356 alloy. Mater. Sci. Eng. A 674, 438–450 (2016)
M.A. Elahi, S.G. Shabestari, Effect of various melt and heat treatment conditions on impact toughness of A356 aluminum alloy. Trans. Nonferrous Met. Soc. China 26(4), 956–965 (2016)
Y. Zhang, N. Ma, Y. Le, S. Li, H. Wang, Mechanical properties and damping capacity after grain refinement in A356 alloy. Mater. Lett. 59(17), 2174–2177 (2005)
Y. Zhang, N. Ma, H. Wang, X. Li, Study on damping behavior of A356 alloy after grain refinement. Mater. Des. 29(3), 706–708 (2008)
B. Milkereit, H. Fröck, C. Schick, O. Kessler, Continuous cooling precipitation diagram of cast aluminium alloy Al–7Si–0.3Mg. Trans. Nonferrous Met. Soc. China 24(7), 2025–2033 (2014)
C.Y. Liu, H.J. Jiang, B. Zhang, Z.Y. Ma, High damping capacity of Al alloys produced by friction stir processing. Mater. Charact. 136, 382–387 (2018)
H.J. Jiang, C.Y. Liu, Y. Chen, Z.X. Yang, H.F. Huang, L.L. Wei, Y.B. Li, H.Q. Qi, Evaluation of microstructure, damping capacity and mechanical properties of Al–35Zn and Al–35Zn–0.5Sc alloys. J. Alloys Compd. 739, 114–121 (2018)
H.J. Jiang, C.Y. Liu, B. Zhang, P. Xue, Z.Y. Ma, K. Luo, M.Z. Ma, R.P. Liu, Simultaneously improving mechanical properties and damping capacity of Al–Mg–Si alloy through friction stir processing. Mater. Charact. 131, 425–430 (2017)
L.J. Colley, M.A. Wells, W.J. Poole, Microstructure–yield strength models for heat treatment of Al–Si–Mg casting alloys II: modelling microstructure and yield strength evolution. Can. Metall. Q. 53(2), 138–150 (2014)
J.Y. Yao, J.A. Taylor, Characterisation of intermetallic particles formed during solution treatment of an Al–7Si–0.4Mg–0.12Fe alloy. J. Alloys Compd. 519, 60–66 (2012)
R. Chen, Q. Xu, Z. Jia, B. Liu, Precipitation behavior and hardening effects of Si-containing dispersoids in Al–7Si–Mg alloy during solution treatment. Mater. Des. 90, 1059–1068 (2016)
H. Puga, V.H. Carneiro, J. Barbosa, D. Soares, Effect of grain and secondary phase morphologies in the mechanical and damping behavior of Al7075 alloys. Met. Mater. Int. 22(5), 863–871 (2016)
A. Granato, K. Lücke, Theory of mechanical damping due to dislocations. J. Appl. Phys. 27(6), 583–593 (1956)
H.K. Småbråten, Characterization of precipitates at maximum hardness and overaged conditions in Al–Mg–Si alloys (NTNU, Trondheim, 2011)
A. Bahrami, Modeling of precipitation sequence and ageing kinetics in Al–Mg–Si alloys (TUDelft, Delft, 2010)
G. Ran, J.E. Zhou, Q.G. Wang, Precipitates and tensile fracture mechanism in a sand cast A356 aluminum alloy. J. Mater. Process. Technol. 207(1), 46–52 (2008)
X. Cao, J. Campbell, Morphology of β-Al5FeSi phase in Al–Si cast alloys. Mater. Trans. 47(5), 1303–1312 (2006)
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Carneiro, V.H., Puga, H. T6 Heat Treatment Impact on the Random Frequency Vibration Stress of Al–Si–Mg Alloys. Met. Mater. Int. 25, 880–887 (2019). https://doi.org/10.1007/s12540-019-00244-z
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12540-019-00244-z