Skip to main content
Log in

Modeling the interaction of hydraulic fracture with natural fracture based on lattice methods

  • Original Paper
  • Published:
Arabian Journal of Geosciences Aims and scope Submit manuscript

Abstract

There are many interactions between hydraulic fractures (HFs) and nature fractures (NFs) during the use of hydraulic fracturing. At present, many scholars have studied hydraulic fracture morphology in hydro-mechanical (HM) coupling. In this paper, thermal-hydro-mechanical (THM) coupling is adopted to investigate the propagation of HFs in NFs. With the purpose of exploring the effects of approach angle, friction angle, NF cohesion, and injection rates on the HF-NF interaction process, the code XSite is used to establish a new THM coupling calculation model in this paper. In addition, we calculated the tensile strength and the toughness of the rock, and the accuracy of the model was verified by tri-axial experiment. Natural fractures and hydraulic fracturing fractures mainly exhibit three different forms: they have not penetrated natural fractures, they are penetrating natural fractures, and they have penetrated NFs. The results indicate that the direction and properties of fractures have a significant influence on the interaction between HFs and NFs. Furthermore, HFs tend to penetrate NFs with large approach angle, friction angle, fracture cohesion, and injection rate, suggesting that large approach angles, friction angles, NF cohesion, and injection rates will prevent NFs from opening and thus prevent cracks from expanding in NFs. With the propagation of fractures, the pressure in the injection well increases while that in the production well decreases. As the injected fluid flows through the rock mass, the low-temperature zone of rock mass diffuses in the same direction, eventually making the temperature of the production fluid and the injection fluid basically the same.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 17

Similar content being viewed by others

References

  • Aydin G (2015) The application of trend analysis for coal demand modeling. Energy Sources Part b-Economics Planning and Policy 10(2):183–191

    Article  Google Scholar 

  • Aydin G (2015) The modeling and projection of primary energy consumption by the sources. Energy Sources Part b-Economics Planning and Policy 10(1):67–74

    Article  Google Scholar 

  • Aydin G, Karakurt I, Aydiner K (2012) Analysis and mitigation opportunities of methane emissions from the energy sector. Energy Sources Part A Recovery Utilization & Environmental Effects 34(9):967–982

    Article  Google Scholar 

  • Bunger AP, Zhang X, Jeffery RG (2012) Parameters affecting the interaction among closely spaced hydraulic fractures. SPE J 17(1):292–306

    Article  Google Scholar 

  • CCFD Add-on (2008) Particle flow code in 3 dimensions. Itasca Consulting Group I. PFC3D ,

  • Dahi-Taleghani A, Olson JE (2011) Numerical modeling of multistranded-hydraulic-fracture propagation: accounting for the interaction between induced and natural fractures. SPE J 16:575–581

    Article  Google Scholar 

  • Damjanac B, Cundall P (2016) Application of distinct element methods to simulation of hydraulic fracturing in naturally fractured reservoirs. Comput Geotech 71:283–294

    Article  Google Scholar 

  • Damjanac B, Detournay C, Cundall PA (2016) Application of particle and lattice codes to simulation of hydraulic fracturing. Comput Part Mech 3:249–261

    Article  Google Scholar 

  • Djabelkhir N , Song X , Wan X (2019) Notch Driven hydraulic fracturing in open hole completions: numerical simulations of lab experiments.

  • Eberhardt E, Stead D, Coggan JS (2004) Numerical analysis of initiation and progressive failure in natural rock slopes-the 1991 Randa rockslide. Int J Rock Mech Min 41:69–87

    Article  Google Scholar 

  • Fu W, Savitski AA, Damjanac B, Bunger AP (2019) Three-dimensional lattice simulation of hydraulic fracture interaction with natural fractures. Comput Geotech 107:214–234

    Article  Google Scholar 

  • Gao F, Kaiser PK, Stead D, Eberhardt E, Elmo D (2019) Strainburst phenomena and numerical simulation of self-initiated brittle rock failure. Int J Rock Mech Min 116:52–63

    Article  Google Scholar 

  • Guancheng Jiang CA, Jinsheng S, Yinbo H, Kaixiao C, Tengfei D (2021) Novel water-based drilling and completion fluid technology to improve wellbore quality during drilling and protect unconventional reservoirs. Engineering

  • Guo T, Tang S (2021) Physical simulation of hydraulic fracturing of large-sized tight sandstone outcrops. SPE J 26(1):372–393

    Article  Google Scholar 

  • Guo J, Luo B, Lu C, Lai J, Ren J (2017) Numerical investigation of hydraulic fracture propagation in a layered reservoir using the cohesive zone method. Eng Fract Mech 186:195–207

    Article  Google Scholar 

  • Hu L, Ghassemi A, Pritchett J (2020) Characterization of laboratory-scale hydraulic fracturing for EGS. Geothermics 83: 101706.1–101706.14.

  • Huang L, Liu J, Zhang F, (2020) 3D lattice modeling of hydraulic fracture initiation and near-wellbore propagation for different perforation models. J Petrol Sci Eng 191:107169.

  • Kang H, Lou J, Gao F, Yang J, Li J (2018) A physical and numerical investigation of sudden massive roof collapse during longwall coal retreat mining. Int J Coal Geol 188:25–36

    Article  Google Scholar 

  • Kgatle M, Mason DP (2014) Propagation of a linear hydraulic fracture with tortuosity. Int J Nonlin Mech 61:39–53

    Article  Google Scholar 

  • Kresse O, Weng X, Gu H, Wu R (2013) Numerical modeling of hydraulic fractures interaction in complex naturally fractured formations. Rock Mech Rock Eng 46:555–568

    Article  Google Scholar 

  • Kza B, Ds C, Hka B (2020) Investigating the interaction of hydraulic fracture with pre-existing joints based on lattice spring modeling. Comput Geotech 122: 103534.

  • Lattice method for modeling brittle jointed rock.In 2011 PA Cundall Lattice method for modeling brittle, jointed rock. In 2nd Int FLAC/DEM Symp. Contin. distinct Elem. Numer. Model. geomechanics Melbourne, Australia

  • Limanond T, Jomnonkwao S, Srikaew A (2011) Projection of future transport energy demand of Thailand. Energ. Meunier, F. 2007. The greenhouse effect: A new source of energy. Appl Therm Eng 27:658–664

    Google Scholar 

  • Milanese E, Ylmaz O, Molinari JFMC, Schrefler B (2017) Avalanches in dry and saturated disordered media at fracture in shear and mixed mode scenarios. Phys Rev E 80:58–68

    Google Scholar 

  • Rui Z, Guo T, Feng Q (2018) Influence of gravel on the propagation pattern of hydraulic fracture in the glutenite reservoir. J Petrol Sci Eng 165:627–639

    Article  Google Scholar 

  • Wan L, Chen M, Zhang F (2019a) Numerical simulation and experimental study of near-wellbore fracture initiation mechanism on sandstone coal interbedding. International Petroleum Technology Conference.

  • Wan X, Rasouli V, Damjanac B (2019b) Numerical simulation of integrated hydraulic fracturing, production and refracturing treatments in the Bakken Formation. 53rd U.S. Rock Mechanics/Geomechanics Symposium.

  • Wolde-Rufael Y (2010) Coal consumption and economic growth revisited. Appl Energ 87(1):160–167

    Article  Google Scholar 

  • Wu K, Olson JE (2015) A simplified three-dimensional displacement discontinuity method for multiple fracture simulations. Int J Fract 193:191–204

    Article  Google Scholar 

  • Xiaoqiang L, Zhanqing Q, Tiankui G, Sun Y, Zhiyuan W, Bakhshi E (2019) Numerical simulation of non-planar fracture propagation in multi-cluster fracturing with natural fractures based on Lattice methods. Engineering Fracture Mechanics 220: 106625

  • Xing P, Yoshioka K, Adachi J (2018) Lattice simulation of laboratory hydraulic fracture containment in layered reservoirs. Comput Geotech 100:62–75

    Article  Google Scholar 

  • Yamamoto K, Shimamoto T, Sukemura S (2004) Multiple fracture propagation model for a three-dimensional hydraulic fracturing simulator. Int J Geomech 4:46–57

    Article  Google Scholar 

  • Yan C, Jiao YY (2018) A 2D fully coupled hydro-mechanical finite-discrete element model with real pore seepage for simulating the deformation and fracture of porous medium driven by fluid. Comput Struct 196:311–326

    Article  Google Scholar 

  • Yan C, Zheng H (2017) FDEM-flow3D: A 3D hydro-mechanical coupled model considering the pore seepage of rock matrix for simulating three-dimensional hydraulic fracturing. Comput Geotech 81:212–228

    Article  Google Scholar 

  • Yan C, Zheng H, Sun G, Ge X (2016) Combined finite-discrete element method for simulation of hydraulic fracturing. Rock Mech Rock Eng 49:1389–1410

    Article  Google Scholar 

  • Yan C, Jiao YY, Zheng H (2018) A fully coupled three-dimensional hydro-mechanical finite discrete element approach with real porous seepage for simulating 3D hydraulic fracturing. Comput Geotech 96:73–89

    Article  Google Scholar 

  • Weipeng Yang, Joshua W. Brownlow, Dustin L. Walker, Jun Lu (2021) Effect of surfactant-assisted wettability alteration on immiscible displacement: a microfluidic study. Water Resources Research 57(8): e2020WR029522.

  • Zhao K, Jiang P, Feng Y (2020) Numerical investigation of hydraulic fracture propagation in naturally fractured reservoirs based on lattice spring model. Geofluids 2020:1–18

    Google Scholar 

  • Zhao X, Young R P (2011) Numerical modeling of seismicity induced by fluid injection in naturally fractured reservoirs. Geophysics 76: WC167-WC180.

  • Zhou S, Rabczuk T, Zhuang X (2018) Phase field modeling of quasi-static and dynamic crack propagation: COMSOL implementation and case studies. Adv Eng Softw 122:31–49

    Article  Google Scholar 

  • Zhou J, Huang H, Deo M (2015) Modeling the interaction between hydraulic and natural fractures using dual-lattice discrete element method.

  • Zhang Ziming (2018) Simulation study on horizontal wells of fracturing in tight oil reservoirs. International Journal of Engineering Sciences & Research Technology 7(6).

Download references

Funding

This work was financially supported by National Natural Science Foundation of China (No.51709231 and No. 52034006) and Open Fund (OGE202102-01) of Key Laboratory of Oil & Gas Equipment, Ministry of Education (Southwest Petroleum University).

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to YanXin Lv.

Ethics declarations

Conflict of interest

The authors declare no competing interests.

Additional information

Responsible Editor: Santanu Banerjee

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Lv, Y., Luo, Z., Zhu, X. et al. Modeling the interaction of hydraulic fracture with natural fracture based on lattice methods. Arab J Geosci 15, 628 (2022). https://doi.org/10.1007/s12517-022-09920-8

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1007/s12517-022-09920-8

Keywords

Navigation