Abstract
In order to explore the influence of the thermal management system (TMS) on vehicle energy management and tap the energy saving potential of TMS, this study establishes a vehicle energy management strategy control model oriented to reduce energy consumption of the TMS based on MATLAB/Simulink for a plug-in hybrid electric vehicle with planetary hybrid configuration. Firstly, a simulation model of vehicle dynamic machine - electric - thermal coupling working process is introduced, to evaluate the impact of TMS in the high and low temperature environment on energy consumption of the vehicle running. Then, based on the equivalent fuel consumption minimum strategy (ECMS) and considering the influence of TMS on energy consumption, an adaptive equivalent consumption minimum strategy model considering thermal characteristics (TAECMS) is established, which propose an improved adaptive equivalent factor adjustment method considering the thermal characteristics of the system is proposed. By establishing the Hamiltonian function to achieve the goal of minimum equivalent fuel consumption, considering the temperature penalty, the power of the engine and the power of the battery is reasonably allocated. Finally, the TAECMS control strategy achieves fuel saving of 6.2 % and 8.4 % respectively in high and low temperature environments through simulation verification and comparison.
Similar content being viewed by others
References
Bent, E., Shayler, P., La Rocca, A. and Rouaud, C. (2013). The effectiveness of stop-start and thermal management measures to improve fuel economy. Vehicle Thermal Management Systems Conf. Proc. (VTMS), Coventry Technocentre, UK.
Brace, C. J., Hawley, G., Akehurst, S., Piddock, M. and Pegg, I. (2008). Cooling system improvements-assessing the effects on emissions and fuel economy. Proc. the Institution of Mechanical Engineers, Part D: J. Automobile Engineering 222, 4, 579–591.
Cho, G. Y., Choi, J. W., Park, J. H. and Cha, S. W. (2014). Transient modeling and validation of lithium ion battery pack with air cooled thermal management system for electric vehicles. Int. J. Automotive Technology 15, 5, 795–803.
Gao, F. W. (2021). Research on the Integrated Thermal Management System of Electric Vehicles Based on Heat Pump. M.S. Thesis. Jilin University. Jilin, China.
Gonder, J. and Markel, T. (2007). Energy management strategies for plug-in hybrid electric vehicles. SAE World Cong., Detroit, Michigan, USA.
Hamut, H. S., Dincer, I. and Naterer, G. F. (2014a). An exergoeconomic analysis of hybrid electric vehicle thermal management systems. J. Thermal Science and Engineering Applications 6, 1, 021004.
Hamut, H. S., Dincer, I. and Naterer, G. F. (2014b). Analysis and optimization of hybrid electric vehicle thermal management systems. J. Power Sources, 247, 643–654.
Li, L. Y., Sun, Z. Y., Huang, X. Z. and Cao, J. W. (2011). Thermal analysis of high speed motor based on flow field calculation considering tooth-slots effects. Int. Conf. Electrical Machines and Systems (ICEMS), Beijing, China.
Lin, X., Feng, Q., Mo, L. and Li, H. (2019). Optimal adaptation equivalent factor of energy management strategy for plug-in CVT HEV. Proc. Institution of Mechanical Engineers, Part D: J. Automobile Engineering 233, 4, 877–889.
Lin, X., Perez, H. E., Mohan, S., Siegel, J. B., Stefanopoulou, A. G., Ding, Y. and Castanier, M. P. (2014). A lumped-parameter electro-thermal model for cylindrical batteries. J. Power Sources, 257, 1–11.
Lu, L., Chen, H., Hu Y. F., Gong, X. and Zhao, Z. X. (2019). Modeling and optimal control for an engine electrified cooling system to minimize fuel consumption. IEEE Access, 7, 72914–72927.
Lu, P., Gao, Q. and Wang, Y. (2016). The simulation methods based on 1D/3D collaborative computing for the vehicle integrated thermal management. Applied Thermal Engineering, 104, 42–53.
Luo, J. F. (2019). Research on Control Strategy of Hybrid Power System Based on the Analysis of Battery Thermal Effect. M.S. Thesis. Jilin University. Jilin, China.
Menken, J. C., Strasser, K., Anzenberger, T. and Rebinger, C. (2018). Evaluation of the energy consumption of a thermal management system of a plug-in hybrid electric vehicle using the example of the Audi Q7 e-tron. SAE Int. J. Passenger Cars-Mechanical Systems 11, 3, 203–212.
National Technical Committee of Auto Standardization (NTCAS) (2011). Fuel Consumption Test Methods for Heavy-duty Commercial Vehicles. Standards Press of China. Beijing, China.
Ning, H., Zhang, B. L., Li, C. J. and Niu, L. (2016). Research on the cooling capacity of battery pack based on the highway fuel economy test. Chinese Journal of Automotive Engineering 6, 2, 137–142.
Paganelli, G., Delprat, S., Guerra, T. M., Rimaux, J. and Santin, J. J. (2002). Equivalent consumption minimization strategy for parallel hybrid powertrains. IEEE 55th Vehicular Technology Conf., Birmingham, Alabama, USA.
Roberts, A., Brooks, R. and Shipway, P. (2014). Internal combustion engine cold-start efficiency: A review of the problem, causes and potential solutions. Energy Conversion and Management, 82, 327–350.
Samhaber, C., Wimmer, A. and Loibner, E. (2001). Modeling of engine warm-up with integration of vehicle and engine cycle simulation. SAE Paper No. 2001-01-1697.
Sato, N. (2001). Thermal behavior analysis of lithium-ion batteries for electric and hybrid vehicles. J. Power Sources 99, 1–2, 70–77.
Shams-Zahraei, M. (2012). Integrated Thermal and Energy Management of Plug-in Hybrid Electric Vehicles. Ph. D. Thesis. Deakin University. Geelong, Australia.
Shams-Zahraei, M., Kouzani, A. Z., Kutter, S. and Bäker, B. (2012). Integrated thermal and energy management of plug-in hybrid electric vehicles. J. Power Sources, 216, 237–248.
Sun, J. L., Li, X. Y., Wei, G., Lu, R. G., Song, L. W., Zhu, C. B. and Hu, C. (2015). Low current rate discharge with external heating at low temperature. IEEE Vehicle Power and Propulsion Conf. (VPPC), Montreal, Canada.
Tang, X. L., Jia, T., Hu, X. S., Huang, Y. J., Deng, Z. W. and Pu, H. Y. (2021). Naturalistic data-driven predictive energy management for plug-in hybrid electric vehicles. IEEE Trans. Transportation Electrification 7, 2, 497–508.
Tao, X. R., Zhou, K., Ivanco, A., Wagner, J. R., Hofmann, H., and Filipi, Z. (2015). A hybrid electric vehicle thermal management systems-nonlinear controller design. SAE Paper No. 2015-01-1710.
Wang, P., Li, J., Yu, Y., Xiong, X., Zhao, S. and Shen, W. (2020). Energy management of plug-in hybrid electric vehicle based on trip characteristic prediction. Proc. Institution of Mechanical Engineers, Part D: J. Automobile Engineering 234, 8, 2239–2259.
Wang, Q. N., Han, B., Wang, P. Y., Li, F. and Wang, W. (2015). Motor cooling system design and optimal cooling temperature control of electric vehicle. J. Jilin University (Engineering and Technology Edition) 45, 1, 1–6.
Wei, Z. (2010). Research on the Thermal Management of High Power Density Permanent Magnet Synchronous Motor in HEV. M.S. Thesis. Harbin Institute of Technology. Heilongjiang, China.
Will, F. (2012). Fuel conservation and emission reduction through novel waste heat recovery for internal combustion engines. Fuel, 102, 247–255.
Wu, J., Zhang, C. H. and Cui, N. X. (2008). PSO algorithm-based parameter optimization for HEV powertrain and its control strategy. Int. J. Automotive Technology 9, 1, 53–59.
Xu, X., Zhang, T., Wang, F., Wang, S. H. and Zhou, Z. G. (2020). Integrated energy management strategy of powertrain and cooling system for PHEV. Int. J. Green Energy 17, 5, 319–331.
Yang, X. L., Ma, Z. H., Yang, L., Ren, G. F. and Xia, B. B. (2016). Thermal management system of electric vehicle based on heat pump. J. Central South University Science and Technology 47, 8, 2855–2863.
Yu, Y. B., Li, X. Y., Min, H. T., Zhang, X. W. and Feng, D. (2018). Preheating strategy of extended-range electric vehicle power battery packs for low-temperature driving. China J. Highway and Transport 31, 9, 209–219.
Zeng, X. H., Bai, G., Wang, J. X. and Zhou, Z. P. (2013). The instantaneous optimal control strategy of parallel hybrid loader. Applied Mechanics and Materials, 380–384, 467–471.
Zeng, X. H., Niu, C. F., Song, D. F. and Ji, R. H. (2021). Deep energy-saving analysis of fuel cell vehicles. J. Harbin Institute of Technology 53, 7, 77–83.
Zeng, Y. P., Qin, D. T., Yang, G. L. and Yao, M. Y. (2015). Research on the plug-in hybrid electric vehicle optimal control strategy considering engine cold effect. China J. Highway and Transport 28, 5, 137–143.
Zhang, B., Li, J., Gao, Y., Yang, C. H. and Yin, X. F. (2010). Study on global optimization of plug-in hybrid electric vehicle energy management strategies. China Mechanical Engineering 21, 6, 715–720.
Zhang, X. Y., Ivanco, A., Tao, X. R., Wagner, J. and Filipi, Z. (2014). Optimization of the series-HEV control with consideration of the impact of battery cooling auxiliary losses. SAE Int. J. Alternative Powertrains 3, 1, 234–243.
Acknowledgement
The support from sponsored by Freeexploration project of Natural Science Foundation of Jilin Province (YDZJ202101ZYTS159) and Natural Science Foundation General Program of Jilin Province (20220101211JC) are gratefully acknowledged.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Song, D., Bi, D., Zeng, X. et al. Energy Management Strategy of Plug-In Hybrid Electric Vehicles Considering Thermal Characteristics. Int.J Automot. Technol. 24, 655–668 (2023). https://doi.org/10.1007/s12239-023-0055-0
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12239-023-0055-0