Abstract
A simple analytical model for the effective stiffness of rectangular and triangular corrugated composites is developed for the symmetrical and unsymmetrical laminates. The stiffness matrices for the corrugated composites were derived. The elongation and effective stiffness in the longitudinal and transverse directions for the rectangular and triangular corrugated composites were calculated and compared. The dimensions of the rectangular and triangular elements for unidirectional and plain woven fabrics made up of E-glass/Epoxy were investigated. The analytical model has been validated by experimental results from bending and tension tests. FEM models were used to predict the characteristics of rectangular and triangularly corrugated composites using ABAQUS. FEM and analytical models results are compared. Load displacement curves in tensile and bending tests are investigated. Four stages of their mechanical behaviour are identified. Finally ultimate strain and anisotropic behaviour of rectangular and triangular corrugated composites are investigated as experimentally. Results from FEM in ABAQUS, experimental findings, and analytical simulations show that corrugated composites laminates can afford larger deformations than their flat counterparts. Those laminates or skins have significant anisotropic behaviour and they are candidates for morphing applications.
Similar content being viewed by others
References
P. Ghabezi and M. Golzar, Appl. Com. Mater., 20, 341 (2013).
Y. WeiLong, Sci. China Technol. Sci., 53, 1077 (2010).
A. D. Norman, K. A. Seffen, and S. D. Guest, Int. J. Solid. Struct., 46, 1624 (2009).
P. Isaksson, A. Krusper, and P. A. Gradin, Compos. Struct., 80, 123 (2007).
Y. Xia, O. Bilgen, and M. Friswell, J. Intell. Mater. Sys. Struct., 25, 786 (2014).
A. Ermakova and I. Dayyani, Compos. Pt. B-Eng., 115, 87 (2017).
J. B. Bai, D. Chen, J. J. Xiong, and R. A. Shenoi, Compos. Pt. B-Eng., 131, 134 (2017).
X. Gong, L. Liu, F. Scarpa, J. Leng, and Y. Liu, Smart Mater. Struct., 26, 35 (2016).
A. K. Kaw, “Mechanics of Composite Materials”, 2nd ed., Taylor & Francis Group, CRC, Boca Raton, FL, USA and London, 2005.
J. Varna, R. Joffe, L. A. Berglund, and T. S. Lundstrom, Compos. Sci. Technol., 53, 241 (1995).
S. W. Tsai and H. T. Hahn, “Introduction to Composite Materials”, CRC Press, Boca Raton, FL, USA, 2010.
T. Yokozeki, S. Takeda, T. Ogasawara, and T. Ishikawa, Compos. Pt. A-Appl. Sci. Manuf., 37, 1578 (2006).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Ghabezi, P. Rectangular and Triangular Corrugated Composite Skins. Fibers Polym 19, 435–445 (2018). https://doi.org/10.1007/s12221-018-7728-8
Received:
Revised:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s12221-018-7728-8